X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/ffe0a3577e7b6d490354137ca1aa6e6a9d536c14..7c6d46575a89c424346c6dbdc052b5e22cb0169f:/test/runtest

diff --git a/test/runtest b/test/runtest
index 6f13a792c..3c16a1e46 100755
--- a/test/runtest
+++ b/test/runtest
@@ -16,9 +16,9 @@
 ###############################################################################
 
 #use strict;
-use 5.010;
-use feature 'state';	# included in 5.010
+use v5.10.1;
 use warnings;
+use if $^V >= v5.19.11, experimental => 'smartmatch';
 
 use Errno;
 use FileHandle;
@@ -32,8 +32,10 @@ use FindBin qw'$RealBin';
 
 use lib "$RealBin/lib";
 use Exim::Runtest;
+use Exim::Utils qw(uniq numerically);
 
-use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
+use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Smart::Comments' => '####';
+use if $ENV{DEBUG} && scalar($ENV{DEBUG} =~ /\bruntest\b/) => 'Data::Dumper';
 
 use constant TEST_TOP => 8999;
 use constant TEST_SPECIAL_TOP => 9999;
@@ -62,7 +64,7 @@ my $force_continue = 0;
 my $force_update = 0;
 my $log_failed_filename = 'failed-summary.log';
 my $log_summary_filename = 'run-summary.log';
-my $more = 'less -XF';
+my @more = qw'less -XF';
 my $optargs = '';
 my $save_output = 0;
 my $server_opts = '';
@@ -73,9 +75,6 @@ my $have_ipv4 = 1;
 my $have_ipv6 = 1;
 my $have_largefiles = 0;
 
-my $test_start = 1;
-my $test_end = TEST_TOP;
-
 my @test_list = ();
 
 
@@ -113,7 +112,7 @@ $ENV{LC_ALL} = 'C';
 $ENV{USER} = getpwuid($>) if not exists $ENV{USER};
 
 my ($parm_configure_owner, $parm_configure_group);
-my ($parm_ipv4, $parm_ipv6);
+my ($parm_ipv4, $parm_ipv6, $parm_ipv6_stripped);
 my $parm_hostname;
 
 ###############################################################################
@@ -461,7 +460,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     {
     my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
     $expired = '' if !defined $expired;
-    my($increment) = date_seconds($date3) - date_seconds($date2);
+
+    # Round the time-difference up to nearest even value
+    my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
 
     # We used to use globally unique replacement values, but timing
     # differences make this impossible. Just show the increment on the
@@ -475,6 +476,13 @@ RESET_AFTER_EXTRA_LINE_READ:
   # more_errno values in exim_dumpdb output which are times
   s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
 
+  # port numbers in dumpdb output
+  s/T:([a-z.]+(:[0-9.]+)?):$parm_port_n /T:$1:PORT_N /;
+
+  # port numbers in stderr
+  s/^set_process_info: .*\]:\K$parm_port_d /PORT_D /;
+  s/^set_process_info: .*\]:\K$parm_port_s /PORT_S /;
+
 
   # ======== Dates and times ========
 
@@ -484,12 +492,24 @@ RESET_AFTER_EXTRA_LINE_READ:
   # time used was fixed when I first started running automatic Exim tests.
 
   # Date/time in header lines and SMTP responses
-  s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d\d\d\d\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+  s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
     /Tue, 2 Mar 1999 09:44:33 +0000/gx;
+  # and in a French locale
+  s/\S{4},\s\d\d?\s[^,]+\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+    /dim., 10 f\xE9vr 2019 20:05:49 +0000/gx;
 
   # Date/time in logs and in one instance of a filter test
-  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?/1999-03-02 09:44:33/gx;
+  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?\s/1999-03-02 09:44:33 /gx;
+  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(\s[+-]\d\d\d\d)?\s/2017-07-30 18:51:05.712 /gx;
   s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
+  # Date/time in syslog test
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s/2017-07-30 18:51:05 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s/2017-07-30 18:51:05.712 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s[+-]\d\d\d\d\s/2017-07-30 18:51:05 +9999 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s[+-]\d\d\d\d\s/2017-07-30 18:51:05.712 +9999 /gx;
+
+  s/((D|[RQD]T)=)\d+s/$1qqs/g;
+  s/((D|[RQD]T)=)\d\.\d{3}s/$1q.qqqs/g;
 
   # Date/time in message separators
   s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
@@ -507,7 +527,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     my($next) = $3 - $2;
     $_ = "  first failed=dddd last try=dddd next try=+$next $4\n";
     }
-  s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\d)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+  s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
   s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
 
   # Time to retry may vary
@@ -518,9 +538,6 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Date/time in exim -bV output
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 
-  # Time on queue tolerance
-  s/(QT|D)=1s/$1=0s/;
-
   # Eximstats heading
   s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
     \d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
@@ -530,55 +547,122 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
 
   # ======== TLS certificate algorithms ========
+  #
+  # In Received: headers, convert RFC 8314 style ciphersuite to
+  # the older (comment) style, keeping only the Auth element
+  # (discarding kex, cipher, mac).  For TLS 1.3 there is no kex
+  # element (and no _WITH); insert a spurious "RSA".
+  # Also in $tls_X_cipher_std reporting.
+
+  s/^\s+by \S+ with .+ \K \(TLS1(?:\.[0-3])?\) tls TLS_.*?([^_]+)_WITH.+$/(TLS1.x:ke-$1-AES256-SHAnnn:xxx)/;
+  s/^\s+by \S+ with .+ \K \(TLS1(?:\.[0-3])?\) tls TLS_.+$/(TLS1.x:ke-RSA-AES256-SHAnnn:xxx)/;
+
+  s/ cipher_ TLS_.*?([^_]+)_WITH.+$/ cipher_ TLS1.x:ke_$1_WITH_ci_mac/;
+  s/ cipher_ TLS_.*$/ cipher_ TLS1.x:ke_RSA_WITH_ci_mac/;
+
   # Test machines might have various different TLS library versions supporting
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
+  #
+  # TLSversion : KeyExchange? - Authentication/Signature - C_iph_er - MAC : bits
+  #
   # So far, have seen:
   #   TLSv1:AES128-GCM-SHA256:128
   #   TLSv1:AES256-SHA:256
   #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1.2:DHE-RSA-AES256-SHA:256
+  #   TLSv1.3:TLS_AES_256_GCM_SHA384:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   # We also need to handle the ciphersuite without the TLS part present, for
   # client-ssl's output.  We also see some older forced ciphersuites, but
   # negotiating TLS 1.2 instead of 1.0.
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
+  #
+  # Retain the authentication algorith field as we want to test that.
+
+  s/( (?: (?:\b|\s) [\(=] ) | \s )TLS1(\.[123])?:/$1TLS1.x:/xg;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA)(?!:)/ke-$3-AES256-SHAnnn/g;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA):(128|256)/ke-$3-AES256-SHAnnn:xxx/g;
 
-  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
-  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
-  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
-  s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
-  s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
+  # OpenSSL TLSv1.3 - unsure what to do about the authentication-variant testcases now,
+  # as it seems the protocol no longer supports a user choice.  Replace the "TLS" field with "RSA".
+  # Also insert a key-exchange field for back-compat, even though 1.3 doesn't do that.
+  #
+  # TLSversion : "TLS" - C_iph_er - MAC : ???
+  #
+  s/TLS_AES(_256)?_GCM_SHA384(?!:)/ke-RSA-AES256-SHAnnn/g;
+  s/:TLS_AES(_256)?_GCM_SHA384:256/:ke-RSA-AES256-SHAnnn:xxx/g;
 
   # LibreSSL
+  # TLSv1:AES256-GCM-SHA384:256
   # TLSv1:ECDHE-RSA-CHACHA20-POLY1305:256
-  s/\bECDHE-RSA-CHACHA20-POLY1305\b/AES256-SHA/g;
+  #
+  # ECDHE-RSA-CHACHA20-POLY1305
+  # AES256-GCM-SHA384
+
+  s/(?<!-)(AES256-GCM-SHA384)/RSA-$1/;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305)(?!:)/ke-$3-AES256-SHAnnn/g;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305):256/ke-$3-AES256-SHAnnn:xxx/g;
 
   # GnuTLS have seen:
+  #   TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256
+  #   TLS1.3:ECDHE_SECP256R1__RSA_PSS_RSAE_SHA256__AES_256_GCM__AEAD:256
+  #   TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_256_GCM:256
+  #   TLS1.3:ECDHE_PSK_SECP256R1__AES_256_GCM__AEAD:256
+  #
   #   TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
   #   TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
   #   TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
+  #   TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_256_GCM:256
+  #   TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_128_CBC__SHA256:128
+  #   TLS1.2:ECDHE_SECP256R1__ECDSA_SHA512__AES_256_GCM:256
+  #   TLS1.2:ECDHE_SECP256R1__AES_256_GCM:256		(3.6.7 resumption)
+  #   TLS1.2:ECDHE_RSA_SECP256R1__AES_256_GCM:256	(! 3.5.18 !)
+  #   TLS1.2:RSA__CAMELLIA_256_GCM:256			(leave the cipher name)
+  #   TLS1.2-PKIX:RSA__AES_128_GCM__AEAD:128		(the -PKIX seems to be a 3.1.20 thing)
+  #   TLS1.2-PKIX:ECDHE_RSA_SECP521R1__AES_256_GCM__AEAD:256
   #
   #   X=TLS1.2:DHE_RSA_AES_256_CBC_SHA256:256
   #   X=TLS1.2:RSA_AES_256_CBC_SHA1:256
   #   X=TLS1.1:RSA_AES_256_CBC_SHA1:256
+  #   X=TLS1.0:RSA_AES_256_CBC_SHA1:256
   #   X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
+  #   X=TLS1.0-PKIX:RSA__AES_256_CBC__SHA1:256
   # and as stand-alone cipher:
   #   ECDHE-RSA-AES256-SHA
   #   DHE-RSA-AES256-SHA256
   #   DHE-RSA-AES256-SHA
   # picking latter as canonical simply because regex easier that way.
-  s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
-  s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
-  s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+  s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA-AES256-SHA1:256/g;
+  s/TLS1.[x0123](-PKIX)?:						# TLS version
+    ((EC)?DHE(_((?<psk>PSK)_)?((?<auth>RSA|ECDSA)_)?
+				(SECP(256|521)R1|X25519))?__?)?		# key-exchange
+    ((?<auth>RSA|ECDSA)((_PSS_RSAE)?_SHA(512|256))?__?)?		# authentication
+    (?<with>WITH_)?							# stdname-with
+    AES_(256|128)_(CBC|GCM)						# cipher
+    (__?AEAD)?								# pseudo-MAC
+    (__?SHA(1|256|384))?						# PRF
+    :(256|128)								# cipher strength
+    /"TLS1.x:ke-"
+	. (defined($+{psk}) ? $+{psk} : "")
+	. (defined($+{auth}) ? $+{auth} : "")
+	. (defined($+{with}) ? $+{with} : "")
+	. "-AES256-SHAnnn:xxx"/gex;
+  s/TLS1.2:RSA__CAMELLIA_256_GCM(_SHA384)?:256/TLS1.2:RSA_CAMELLIA_256_GCM-SHAnnn:256/g;
+  s/\b(ECDHE-(RSA|ECDSA)-AES256-SHA|DHE-RSA-AES256-SHA256)\b/ke-$2-AES256-SHAnnn/g;
+
+  # Separate reporting of TLS version
+  s/ver:    TLS1(\.[0-3])?$/ver:    TLS1.x/;
+  s/ \(TLS1(\.[0-3])?\) / (TLS1.x) /;
 
   # GnuTLS library error message changes
-  s/No certificate was found/The peer did not send any certificate/g;
+  s/(No certificate was found|Certificate is required)/The peer did not send any certificate/g;
 #(dodgy test?)  s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
   s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+  s/\(gnutls_handshake\): \KNo supported cipher suites have been found.$/Could not negotiate a supported cipher suite./;
 
   # (this new one is a generic channel-read error, but the testsuite
   # only hits it in one place)
@@ -654,7 +738,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   s/\bgid=\d+/gid=gggg/;
   s/\begid=\d+/egid=gggg/;
-  s/\bpid=\d+/pid=pppp/;
+  s/\b(pid=|PID: )\d+/$1pppp/;
   s/\buid=\d+/uid=uuuu/;
   s/\beuid=\d+/euid=uuuu/;
   s/set_process_info:\s+\d+/set_process_info: pppp/;
@@ -668,8 +752,12 @@ RESET_AFTER_EXTRA_LINE_READ:
   s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
 
   # Optional pid in log lines
-  s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\s[+-]\d\d\d\d|)(\s\[\d+\])/
-    "$1$2 [" . new_value($3, "%s", \$next_pid) . "]"/gxe;
+  s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\.\d{3}|)(\s[+-]\d{4}|)(\s\[\d+\])/
+    "$1$2$3 [" . new_value($4, "%s", \$next_pid) . "]"/gxe;
+
+  # Optional pid in syslog test lines
+  s/^(SYSLOG:\s\'([-0-9]{10}\s[:.0-9]{8,12}\s([-+]\d{4}\s)?|))(\[\d+\] )/
+    "$1\[" . new_value($4, "%s", \$next_pid) . "]"/gxe;
 
   # Detect a daemon stderr line with a pid and save the pid for subsequent
   # removal from following lines.
@@ -680,8 +768,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/waiting for children of \d+/waiting for children of pppp/;
   s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
 
-  # The spool header file name varies with PID
-  s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
+  # Most builds are without HAVE_LOCAL_SCAN
+  next if /^calling local_scan\(\); timeout=300$/;
+  next if /^local_scan\(\) returned 0 NULL$/;
 
   # ======== Port numbers ========
   # Incoming port numbers may vary, but not in daemon startup line.
@@ -697,7 +786,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     }
 
   # Port in host address in spool file output from -Mvh
-  s/^-host_address (.*)\.\d+/-host_address $1.9999/;
+  s/^(--?host_address) (.*)\.\d+/$1 $2.9999/;
 
   if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
     s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
@@ -711,6 +800,12 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Also, the length of space at the end of the host line is dependent
   # on the length of the longest line, so strip it also on otherwise
   # un-rewritten lines like localhost
+  #
+  # host 127.0.0.1     [127.0.0.1]
+  # host 10.0.0.1      [10.0.0.1]-
+  #
+  # host 127.0.0.1     [127.0.0.1]--
+  # host 169.16.16.16  [169.16.16.10]
 
   s/^\s+host\s(\S+)\s+(\S+)/  host $1 $2/;
   s/^\s+(host\s\S+\s\S+)\s+(port=.*)/  host $1 $2/;
@@ -719,9 +814,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
   s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
   s/(^|\W)\K\Q$parm_ipv6\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+  s/(^|\W)\K\Q$parm_ipv6_stripped\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
   s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
   s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
-  s/^(\s+host\s\S+\s+\[\S+\]) +$/$1 /;
+  s/^\s+host\s\S+\s+\[\S+\]\K +$//;     # strip, not collapse the trailing whitespace
 
 
   # ======== Test network IP addresses ========
@@ -837,14 +933,17 @@ RESET_AFTER_EXTRA_LINE_READ:
   last if !defined $_;
 
 
+  # SRS timestamps and signatures vary by hostname and from run to run
+
+  s/SRS0=....=..=[^=]+=[^@]+\@test.ex/SRS0=ZZZZ=YY=the.local.host.name=CALLER\@test.ex/;
+
+
   # ======== Output from the "fd" program about open descriptors ========
   # The statuses seem to be different on different operating systems, but
   # at least we'll still be checking the number of open fd's.
 
   s/max fd = \d+/max fd = dddd/;
-  s/status=0 RDONLY/STATUS/g;
-  s/status=1 WRONLY/STATUS/g;
-  s/status=2 RDWR/STATUS/g;
+  s/status=[0-9a-f]+ (?:RDONLY|WRONLY|RDWR)/STATUS/g;
 
 
   # ======== Contents of spool files ========
@@ -903,7 +1002,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^SSL info:/;
     next if /SSL verify error: depth=0 error=certificate not trusted/;
     s/SSL3_READ_BYTES/ssl3_read_bytes/i;
-    s/^\d+:error:\d+(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+    s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
+    s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+    s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/;
 
     # gnutls version variances
     next if /^Error in the pull function./;
@@ -911,6 +1012,23 @@ RESET_AFTER_EXTRA_LINE_READ:
     # optional IDN2 variant conversions.  Accept either IDN1 or IDN2
     s/conversion  strasse.de/conversion  xn--strae-oqa.de/;
     s/conversion: german.xn--strae-oqa.de/conversion: german.straße.de/;
+
+    # subsecond timstamp info in reported header-files
+    s/^(-received_time_usec \.)\d{6}$/$1uuuuuu/;
+
+    # Postgres server takes varible time to shut down; lives in various places
+    s/^waiting for server to shut down\.+ done$/waiting for server to shut down.... done/;
+    s/^\/.*postgres /POSTGRES /;
+
+    # DMARC is not always supported by the build
+    next if /^dmarc_tld_file =/;
+
+    # ARC is not always supported by the build
+    next if /^arc_sign =/;
+
+    # TLS resumption is not always supported by the build
+    next if /^tls_resumption_hosts =/;
+    next if /^-tls_resumption/;
     }
 
   # ======== stderr ========
@@ -921,15 +1039,20 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     s/^Exim version .*/Exim version x.yz ..../;
 
-    # Debugging lines for Exim terminations
+    # Debugging lines for Exim terminations and process-generation
 
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
+    s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
+    s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
     s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 
+    # we don't care what TZ enviroment the testhost was running
+    next if /^Reset TZ to/;
+
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;
@@ -938,6 +1061,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/;
     next if /OpenSSL runtime version: OpenSSL \d+[\.\da-z]+/;
 
+    # this is timing-dependent
+    next if /^OpenSSL: creating STEK$/;
+
     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;
@@ -987,7 +1113,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /name=localhost address=::1/;
 
     # drop pdkim debugging header
-    next if /^PDKIM <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+$/;
+    next if /^DKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
 
     # Various other IPv6 lines must be omitted too
 
@@ -995,6 +1121,8 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /get\[host\|ipnode\]byname\[2\]\(af=inet6\)/;
     next if /DNS lookup of \S+ \(AAAA\) using fakens/;
     next if / in dns_ipv4_lookup?/;
+    next if / writing neg-cache entry for .*AAAA/;
+    next if /^faking res_search\(AAAA\) response length as 65535/;
 
     if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
       {
@@ -1002,6 +1130,17 @@ RESET_AFTER_EXTRA_LINE_READ:
       next;
       }
 
+    # Non-TLS bulds have a different Recieved: header expansion
+    s/^((.*)\t}}}}by \$primary_hostname \$\{if def:received_protocol \{with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+    s/^((\s*).*considering: with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+    if (/condition: def:tls_in_cipher_std$/)
+      {
+      $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+      $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+      $_= <IN>; $_= <IN>; $_= <IN>; next;
+      }
+
+
     # Skip tls_advertise_hosts and hosts_require_tls checks when the options
     # are unset, because tls ain't always there.
 
@@ -1030,12 +1169,14 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Some DBM libraries seem to make DBM files on opening with O_RDWR without
     # O_CREAT; other's don't. In the latter case there is some debugging output
     # which is not present in the former. Skip the relevant lines (there are
-    # two of them).
+    # three of them).
 
-    if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+    if (/returned from EXIM_DBOPEN: \(nil\)/)
       {
-      $_ = <IN>;
-      next;
+      $_ .= <IN>;
+      s?\Q$parm_cwd\E?TESTSUITE?g;
+      if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+	{ $_ = <IN>; next; }
       }
 
     # Some tests turn on +expand debugging to check on expansions.
@@ -1054,17 +1195,40 @@ RESET_AFTER_EXTRA_LINE_READ:
     # remote port numbers vary
     s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
 
+    # Platform-dependent error strings
+    s/Operation timed out/Connection timed out/;
+
+    # Platform differences on disconnect
+    s/unexpected disconnection while reading SMTP command from \[127.0.0.1\] \K\(error: Connection reset by peer\) //;
+
+    # Platform-dependent resolver option bits
+    s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
+
+    # timing variance, run-to-run
+    s/^time on queue = \K1s/0s/;
+
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
-
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
+    # DISABLE_OCSP
+    next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
+
     # SUPPORT_PROXY
     next if /host in hosts_proxy\?/;
 
+    # PIPE_CONNECT
+    next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
+
     # Experimental_International
     next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
 
+    # Experimental_REQUIRETLS
+    next if / in tls_advertise_requiretls?\? no \(end of list\)/;
+
+    # TCP Fast Open
+    next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
+
     # Environment cleaning
     next if /\w+ in keep_environment\? (yes|no)/;
 
@@ -1078,31 +1242,88 @@ RESET_AFTER_EXTRA_LINE_READ:
     if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
       {
       $_ .= <IN>;
-      s/\s+\}\}(?=\(Exim )/\}\} /;
+      s/[\s╎]+\}\}(?=\(Exim )/\}\} /;
       }
-    if (/^  condition: def:tls_cipher$/)
+    if (/^ ├──condition: def:tls_cipher$/)
       {
       <IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
       <IN>; <IN>; <IN>; <IN>; <IN>; next;
       }
 
     # Not all platforms build with DKIM enabled
-    next if /^PDKIM >> Body data for hash, canonicalized/;
+    next if /^DKIM >> Body data for hash, canonicalized/;
+
+    # Not all platforms build with SPF enabled
+    next if /^(spf_conn_init|SPF_dns_exim_new|spf_compile\.c)/;
+
+    # Not all platforms have sendfile support
+    next if /^cannot use sendfile for body: no support$/;
 
     #  Parts of DKIM-specific debug output depend on the time/date
     next if /^date:\w+,\{SP\}/;
-    next if /^PDKIM \[[^[]+\] (Header hash|b) computed:/;
+    next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
 
     # Not all platforms support TCP Fast Open, and the compile omits the check
-    if (s/\S+ in hosts_try_fastopen\? no \(option unset\)\n$//)
+    if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)
       {
+      chomp;
       $_ .= <IN>;
       s/ \.\.\. >>> / ... /;
+      if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { chomp; $_ .= <IN>; }
       s/Address family not supported by protocol family/Network Error/;
       s/Network is unreachable/Network Error/;
       }
-
     next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
+    s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
+
+    if (/^([0-9: ]*						# possible timestamp
+	Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
+	\ .*TFO\ mode\x20
+	(sendto,\ no\ data:\ EINPROGRESS			# Linux
+	|connection\ attempt\ to\ [^,]+,\ 0\ data)		# MacOS & no-support
+	$/x)
+      {
+      $_ = $1 . " ... " . <IN>;
+      s/^(.* \.\.\.) [0-9: ]*connected$/$1  connected/;
+
+      if (/^Connecting to .* \.\.\.  connected$/)
+	{
+	$_ .= <IN>;
+	if (/^(Connecting to .* \.\.\.  )connected\n\s+SMTP(\(close\)>>|\(Connection refused\)<<)$/)
+	  {
+	  $_ = $1 . "failed: Connection refused\n" . <IN>;
+	  s/^(Connecting .*)\n\s+SMTP\(close\)>>$/$1/;
+	  }
+	elsif (/^(Connecting to .* \.\.\.  connected\n)read response data: size=/)
+	  { $_ = $1; }
+
+	# Date/time in SMTP banner
+	s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d{4}\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+	  /Tue, 2 Mar 1999 09:44:33 +0000/gx;
+	}
+      }
+
+    # Specific pointer values reported for DB operations change from run to run
+    s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+    s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+
+    # Platform-dependent output during MySQL startup
+    next if /PerconaFT file system space/;
+    next if /^Waiting for MySQL server to answer/;
+    next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
+
+    # Not all builds include DMARC
+    next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
+
+    # TLS resumption is not always supported by the build
+    next if /in tls_resumption_hosts\?/;
+
+    # Platform differences in errno strings
+    s/  SMTP\(Operation timed out\)<</  SMTP(Connection timed out)<</;
+
+    # Platform differences for errno values (eg. Hurd)
+    s/^errno = \d+$/errno = EEE/;
+    s/^writing error \d+: /writing error EEE: /;
 
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
@@ -1136,6 +1357,7 @@ RESET_AFTER_EXTRA_LINE_READ:
                 /^Support for:/ ||
                 /^Routers:/ ||
                 /^Transports:/ ||
+                /^Malware:/ ||
                 /^log selectors =/ ||
                 /^cwd=/ ||
                 /^Fixed never_users:/ ||
@@ -1155,6 +1377,64 @@ RESET_AFTER_EXTRA_LINE_READ:
     {
     # Berkeley DB version differences
     next if / Berkeley DB error: /;
+
+    # CHUNKING: exact sizes depend on hostnames in headers
+    s/(=>.* K C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
+
+    # openssl version variances
+    s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
+    s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(?:(?i)ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
+    s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
+    s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
+
+    # gnutls version variances
+    if (/TLS error on connection \(recv\): .* (Decode error|peer did not send any certificate)/)
+      {
+      my $prev = $_;
+      $_ = <IN>;
+      if (/error on first read/)
+	{
+	s/TLS session: \Kerror on first read:/(gnutls_handshake): A TLS fatal alert has been received.:/;
+	goto RESET_AFTER_EXTRA_LINE_READ;
+	}
+      else
+	{ $_ = $prev; }
+      }
+    # translate gnutls error into the openssl one
+    s/ARC: AMS signing: privkey PEM-block import: \KThe requested data were not available.$/error:0906D06C:PEM routines:PEM_read_bio:no start line/;
+
+    # DKIM timestamps
+    if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
+      {
+      my ($prefix, $t_diff) = ($1, $3 - $2);
+      s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
+      }
+
+    # port numbers
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d2/PORT_D2/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d3/PORT_D3/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d4/PORT_D4/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_s/PORT_S/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
+    s/I=\[[^\]]*\]:\K\d+/ppppp/;
+
+    # Platform differences for errno values (eg. Hurd).  Leave 0 and negative numbers alone.
+    s/R=\w+ T=\w+ defer\K \([1-9]\d*\): / (EEE): /;
+    }
+
+  # ======== mail ========
+
+  elsif ($is_mail)
+    {
+    # DKIM timestamps, and signatures depending thereon
+    if ( /^(\s+)t=([0-9]*); x=([0-9]*); b=[A-Za-z0-9+\/]+$/ )
+      {
+      my ($indent, $t_diff) = ($1, $3 - $2);
+      s/.*/${indent}t=T; x=T+${t_diff}; b=bbbb;/;
+      <IN>;
+      <IN>;
+      }
     }
 
   # ======== All files other than stderr ========
@@ -1282,7 +1562,7 @@ if (! -e $sf_current)
       log_failure($log_failed_filename, $testno, $rf);
       log_test($log_summary_filename, $testno, 'F') if ($force_continue);
     }
-    return 1 if /^c$/i && $rf !~ /paniclog/ && $rsf !~ /paniclog/;
+    return 1 if /^c$/i && $rf !~ /paniclog/ && (!defined $rsf || $rsf !~ /paniclog/);
     last if (/^[sc]$/);
     }
 
@@ -1293,7 +1573,7 @@ if (! -e $sf_current)
       print "\n";
       print "------------ $f -----------\n"
         if (defined $rf && -s $rf && defined $rsf && -s $rsf);
-      system("$more '$f'");
+      system @more => $f;
       }
     }
 
@@ -1375,26 +1655,25 @@ if (-e $sf_current)
         }
       }
 
-    open(MUNGED, '>', $mf) || tests_exit(-1, "Failed to open $mf: $!");
-    for ($i = 0; $i < @munged; $i++)
-      { print MUNGED $munged[$i]; }
-    close(MUNGED);
+    open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+    print $fh @munged;
     }
 
   # Deal with log sorting
 
   if ($sortfile)
     {
-    my(@munged, $i, $j);
 
-    open(MUNGED, $mf) || tests_exit(-1, "Failed to open $mf: $!");
-    @munged = <MUNGED>;
-    close(MUNGED);
+    my @munged = do {
+      open(my $fh, '<', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+      <$fh>;
+    };
 
-    for ($i = 0; $i < @munged; $i++)
+    for (my $i = 0; $i < @munged; $i++)
       {
       if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
         {
+        my $j;
         for ($j = $i + 1; $j < @munged; $j++)
           {
           last if $munged[$j] !~
@@ -1406,11 +1685,9 @@ if (-e $sf_current)
         }
       }
 
-    open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
-    print MUNGED "**NOTE: The delivery lines in this file have been sorted.\n";
-    for ($i = 0; $i < @munged; $i++)
-      { print MUNGED $munged[$i]; }
-    close(MUNGED);
+    open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+    print $fh "**NOTE: The delivery lines in this file have been sorted.\n";
+    print $fh @munged;
     }
 
   # Do the comparison
@@ -1420,7 +1697,7 @@ if (-e $sf_current)
   # Handle comparison failure
 
   print "** Comparison of $mf with $sf_current failed";
-  system("$more test-cf");
+  system @more => 'test-cf';
 
   print "\n";
   for (;;)
@@ -1451,8 +1728,7 @@ else
     # if we deal with a flavour file, we can't delete it, because next time the generic
     # file would be used again
     if ($sf_current eq $sf_flavour) {
-      open(FOO, ">$sf_current");
-      close(FOO);
+      open(my $fh, '>', $sf_current);
     }
     else {
       tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
@@ -1484,6 +1760,11 @@ $munges =
     'gnutls_handshake' =>
     { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
 
+    'gnutls_bad_clientcert' =>
+    { 'mainlog' => 's/\(certificate verification failed\): certificate invalid/\(gnutls_handshake\): The peer did not send any certificate./',
+      'stdout'  => 's/Succeeded in starting TLS/A TLS fatal alert has been received.\nFailed to start TLS'
+    },
+
     'optional_events' =>
     { 'stdout' => '/event_action =/' },
 
@@ -1503,10 +1784,17 @@ $munges =
     { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
 
     'tls_anycipher' =>
-    { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+    { 'mainlog'   => 's! X=TLS\S+ ! X=TLS_proto_and_cipher !;
+		      s! DN="C=! DN="/C=!;
+		      s! DN="[^,"]*\K,!/!;
+		      s! DN="[^,"]*\K,!/!;
+		      s! DN="[^,"]*\K,!/!;
+		     ',
+      'rejectlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /',
+    },
 
     'debug_pid' =>
-    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d+/ppppp/g' },
 
     'optional_dsn_info' =>
     { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
@@ -1514,13 +1802,18 @@ $munges =
 
     'optional_config' =>
     { 'stdout' => '/^(
-                  dkim_(canon|domain|private_key|selector|sign_headers|strict)
+                  dkim_(canon|domain|private_key|selector|sign_headers|strict|hash|identity|timestamps)
                   |gnutls_require_(kx|mac|protocols)
+		  |hosts_pipe_connect
                   |hosts_(requ(est|ire)|try)_(dane|ocsp)
-                  |hosts_(avoid|nopass|require|verify_avoid)_tls
+		  |dane_require_tls_ciphers
+                  |hosts_(avoid|nopass|noproxy|require|verify_avoid)_tls
+                  |pipelining_connect_advertise_hosts
                   |socks_proxy
                   |tls_[^ ]*
-                  )($|[ ]=)/x' },
+		  |utf8_downconvert
+                  )($|[ ]=)/x'
+    },
 
     'sys_bindir' =>
     { 'mainlog' => 's%/(usr/(local/)?)?bin/%SYSBINDIR/%' },
@@ -1535,7 +1828,13 @@ $munges =
     },
 
     'timeout_errno' =>		# actual errno differs Solaris vs. Linux
-    { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
+    { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 <EEE> /' },
+
+    'peer_terminated_conn' =>	# actual error differs FreedBSD vs. Linux
+    { 'stderr' => 's/^(  SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
+
+    'perl_variants' =>		# result of hash-in-scalar-context changed from bucket-fill to keycount
+    { 'stdout' => 's%^> X/X$%> X%' },
   };
 
 
@@ -1891,34 +2190,37 @@ if (/^dbmbuild\s+(\S+)\s+(\S+)/)
 
 if (/^dump\s+(\S+)/)
   {
-  my($which) = $1;
-  my(@temp);
+  my $which  = $1;
   print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
-  open(IN, "./eximdir/exim_dumpdb $parm_cwd/spool $which |");
-  open(OUT, ">>test-stdout");
-  print OUT "+++++++++++++++++++++++++++\n";
+  open(my $in, "-|", './eximdir/exim_dumpdb', "$parm_cwd/spool", $which) or die "Can't run exim_dumpdb: $!";
+  open(my $out, ">>test-stdout");
+  print $out "+++++++++++++++++++++++++++\n";
 
   if ($which eq "retry")
     {
-    $/ = "\n  ";
-    @temp = <IN>;
-    $/ = "\n";
-
-    @temp = sort {
-                   my($aa) = split(' ', $a);
-                   my($bb) = split(' ', $b);
-                   return $aa cmp $bb;
-                 } @temp;
-
+    # the sort key is the first part of the retry db dump line, but for
+    # sorting we (temporarly) replace the own hosts ipv4 with a munged
+    # version, which matches the munging that is done later
+    # Why? We must ensure sure, that 127.0.0.1 always sorts first
+    # map-sort-map: Schwartz's transformation
+    # test 0099
+    my @temp = map  { $_->[1] }
+               sort { $a->[0] cmp $b->[0] }
+               #map  { [ (split)[0] =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/gr, $_ ] }  # this is too modern for 5.10.1
+               map  {
+                (my $k = (split)[0]) =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/g;
+                [ $k, $_ ]
+               }
+               do { local $/ = "\n  "; <$in> };
     foreach $item (@temp)
       {
       $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;
-      print OUT "  $item\n";
+      print $out "  $item\n";
       }
     }
   else
     {
-    @temp = <IN>;
+    my @temp = <$in>;
     if ($which eq "callout")
       {
       @temp = sort {
@@ -1927,11 +2229,9 @@ if (/^dump\s+(\S+)/)
                    return $aa cmp $bb;
                    } @temp;
       }
-    print OUT @temp;
+    print $out @temp;
     }
-
-  close(IN);
-  close(OUT);
+  close($in); # close it explicitly, otherwise $? does not get set
   return 1;
   }
 
@@ -2062,7 +2362,7 @@ elsif (/^millisleep\s+(.*)$/)
 
 
 # The "munge" command selects one of a hardwired set of test-result modifications
-# to be made before result compares are run agains the golden set.  This lets
+# to be made before result compares are run against the golden set.  This lets
 # us account for test-system dependent things which only affect a few, but known,
 # test-cases.
 # Currently only the last munge takes effect.
@@ -2274,9 +2574,24 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
 
   if ($args =~ /\$msg/)
     {
-    my @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',
+    my($queuespec);
+    if ($args =~ /-qG\w+/) { $queuespec = $&; }
+
+    my @listcmd;
+
+    if (defined $queuespec)
+      {
+      @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',
+		   $queuespec,
+                   "-DEXIM_PATH=$parm_cwd/eximdir/exim",
+                   -C => "$parm_cwd/test-config");
+      }
+    else
+      {
+      @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',
                    "-DEXIM_PATH=$parm_cwd/eximdir/exim",
                    -C => "$parm_cwd/test-config");
+      }
     print ">> Getting queue list from:\n>>    @listcmd\n" if $debug;
     # We need the message ids sorted in ascending order.
     # Message id is: <timestamp>-<pid>-<fractional-time>. On some systems (*BSD) the
@@ -2392,6 +2707,7 @@ elsif (/^background$/)
 
   $_ = <SCRIPT>; $lineno++;
   chomp;
+  do_substitute($testno);
   $line = $_;
   if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
 
@@ -2500,7 +2816,7 @@ umask 022;
 #       Check for the "less" command             #
 ##################################################
 
-$more = 'more' if system('which less >/dev/null 2>&1') != 0;
+@more = 'more' if system('which less >/dev/null 2>&1') != 0;
 
 
 
@@ -2521,16 +2837,19 @@ $more = 'more' if system('which less >/dev/null 2>&1') != 0;
 # options are passed on to Exim calls within the tests. Typically, this is used
 # to turn on Exim debugging while setting up a test.
 
+Getopt::Long::Configure qw(no_getopt_compat);
 GetOptions(
     'debug'    => sub { $debug          = 1; $cr   = "\n" },
     'diff'     => sub { $cf             = 'diff -u' },
-    'continue' => sub { $force_continue = 1; $more = 'cat' },
+    'continue' => sub { $force_continue = 1; @more = 'cat' },
     'update'   => \$force_update,
     'ipv4!'    => \$have_ipv4,
     'ipv6!'    => \$have_ipv6,
     'keep'     => \$save_output,
     'slow'     => \$slow,
     'valgrind' => \$valgrind,
+    'range=s{2}'       => \my @range_wanted,
+    'test=i@'          => \my @tests_wanted,
     'flavor|flavour=s' => \$flavour,
     'help'             => sub { pod2usage(-exit => 0) },
     'man'              => sub {
@@ -2545,16 +2864,15 @@ GetOptions(
 ($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);
 print "Exim binary is `$parm_exim'\n" if defined $parm_exim;
 
-# Any subsequent arguments are a range of test numbers.
 
-if (@ARGV)
-  {
-  $test_end = $test_start = shift;
-  $test_end = shift if @ARGV;
-  $test_end = ($test_start >= 9000)? TEST_SPECIAL_TOP : TEST_TOP
-    if $test_end eq '+';
-  die "** Test numbers out of order\n" if ($test_end < $test_start);
-  }
+my @wanted = sort numerically uniq
+  @tests_wanted ? @tests_wanted : (),
+  @range_wanted ? $range_wanted[0] .. $range_wanted[1] : (),
+  @ARGV ? @ARGV == 1 ? $ARGV[0] :
+          $ARGV[1] eq '+' ? $ARGV[0]..($ARGV[0] >= 9000 ? TEST_SPECIAL_TOP : TEST_TOP) :
+          0+$ARGV[0]..0+$ARGV[1]    # add 0 to cope with test numbers starting with zero
+        : ();
+@wanted = 1..TEST_TOP if not @wanted;
 
 ##################################################
 #        Check for sudo access to root           #
@@ -2597,7 +2915,7 @@ $parm_cwd = Cwd::getcwd();
 
 # If $parm_exim is still empty, ask the caller
 
-if ($parm_exim eq '')
+if (not $parm_exim)
   {
   print "** Did not find an Exim binary to test\n";
   for ($i = 0; $i < 5; $i++)
@@ -2647,7 +2965,6 @@ foreach (@eximinfo)
     my $git = `git describe --dirty=-XX --match 'exim-4*'`;
     if (defined $git and $? == 0) {
       chomp $git;
-      $version =~ s/^\d+\K\./_/;
       $git =~ s/^exim-//i;
       $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
       print <<___
@@ -2710,7 +3027,7 @@ if (defined $parm_trusted_config_list)
   open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
   my $test_config = getcwd() . '/test-config';
   die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
-  if not grep { /^$test_config$/ } <TCL>;
+  if not grep { /^\Q$test_config\E$/ } <TCL>;
   }
 else
   {
@@ -2724,6 +3041,9 @@ die "CONFIGURE_GROUP ($parm_configure_group) does not match the group invoking $
 	if 0020 & (stat "$parm_cwd/test-config")[2]
 	and $parm_configure_group != $);
 
+die "aux-fixed file is group-writeable; best to strip them all, recursively\n"
+	if 0020 & (stat "aux-fixed/0037.f-1")[2];
+
 
 open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
   die "** Cannot run $parm_exim: $!\n";
@@ -2735,6 +3055,7 @@ while (<EXIMINFO>)
   my(@temp);
 
   if (/^(Exim|Library) version/) { print; }
+  if (/Runtime: /) {print; }
 
   elsif (/^Size of off_t: (\d+)/)
     {
@@ -2798,6 +3119,15 @@ while (<EXIMINFO>)
         }
       }
     }
+
+  elsif (/^Malware: (.*)/)
+    {
+    print;
+    @temp = split /(\s+)/, $1;
+    push(@temp, ' ');
+    %parm_malware = @temp;
+    }
+
   }
 close(EXIMINFO);
 print "-" x 78, "\n";
@@ -3108,6 +3438,12 @@ unless (defined $parm_eximgroup)
   die "** ABANDONING.\n";
   }
 
+if ($parm_caller_home eq $parm_cwd)
+  {
+  print "will confuse working dir with homedir; change homedir\n";
+  die "** ABANDONING.\n";
+  }
+
 print "You need to be in the Exim group to run these tests. Checking ...";
 
 if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
@@ -3122,21 +3458,29 @@ else
 
 # Find this host's IP addresses - there may be many, of course, but we keep
 # one of each type (IPv4 and IPv6).
+#XXX it would be good to avoid non-UP interfaces
 
 open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address' : 'ifconfig -a')
   or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
 while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
   {
-  if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
+  if (/^(?:[0-9]+: )?([a-z0-9]+): /) { $ifname = $1; }
+
+  if (not $parm_ipv4 and /^\s*inet(?:\saddr(?:ess))?:?\s*(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
     {
-    next if $1 =~ /^(?:127|10)\./;
+    # It would be nice to be able to vary the /16 used for manyhome; we could take
+    # an option to runtest used here - but we'd also have to pass it on to fakens.
+    # Possibly an environment variable?
+    next if $1 eq '0.0.0.0' or $1 =~ /^(?:127|10\.250)\./;
     $parm_ipv4 = $1;
     }
 
-  if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:\/\d+)/i)
+  if (   (not $parm_ipv6 or $parm_ipv6 =~ /%/)
+     and /^\s*inet6(?:\saddr(?:ess))?:?\s*([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
     {
-    next if $1 eq '::1' or $1 =~ /^fe80/i;
+    next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i or $1 =~ /^fe80::1/i;
     $parm_ipv6 = $1;
+    if ($1 =~ /^fe80/i) { $parm_ipv6 .= '%' . $ifname; }
     }
   }
 close(IFCONFIG);
@@ -3193,6 +3537,9 @@ else
 
 print "IPv4 address is $parm_ipv4\n";
 print "IPv6 address is $parm_ipv6\n";
+$parm_ipv6 =~ /^[^%\/]*/;
+# drop any %scope from the ipv6, for some uses
+($parm_ipv6_stripped = $parm_ipv6) =~ s/%.*//g;
 
 # For munging test output, we need the reversed IP addresses.
 
@@ -3202,7 +3549,7 @@ $parm_ipv4r = ($parm_ipv4 !~ /^\d/)? '' :
 $parm_ipv6r = $parm_ipv6;             # Appropriate if not in use
 if ($parm_ipv6 =~ /^[\da-f]/)
   {
-  my(@comps) = split /:/, $parm_ipv6;
+  my(@comps) = split /:/, $parm_ipv6_stripped;
   my(@nibbles);
   foreach $comp (@comps)
     {
@@ -3237,6 +3584,12 @@ if ($parm_hostname =~ /[[:upper:]]/)
   print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
   }
 
+if ($parm_hostname =~ /\.example\.com$/)
+  {
+  die "\n*** Host name ends in .example.com; this conflicts with the testsuite use of that domain.\n"
+	. "    Please change the host's name (or comment out this check, and fail several testcases)\n";
+  }
+
 
 
 ##################################################
@@ -3290,7 +3643,6 @@ system("sudo cp eximdir/exim eximdir/exim_exim;" .
        "sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
        "sudo chmod 06755 eximdir/exim_exim");
 
-
 ##################################################
 #     Make copies of utilities we might need     #
 ##################################################
@@ -3333,6 +3685,15 @@ if (system("cp $parm_exim_dir/eximstats eximdir") != 0)
   tests_exit(-1, "Failed to make a copy of eximstats: $!");
   }
 
+# Collect some version information
+print '-' x 78, "\n";
+print "Perl version for runtest: $]\n";
+foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) {
+  # fold (or unfold?) multiline output into a one-liner
+  print join(', ', map { chomp; $_ } `$_ --version`), "\n";
+}
+print '-' x 78, "\n";
+
 
 ##################################################
 #    Check that the Exim user can access stuff   #
@@ -3390,7 +3751,9 @@ tests_exit(-1, "Failed to unlink $log_summary_filename: $!")
 # because the current binary does not support the right facilities, and also
 # those that are outside the numerical range selected.
 
-print "\nTest range is $test_start to $test_end (flavour $flavour)\n";
+printf "\nWill run %d tests between %d and %d for flavour %s\n",
+  scalar(@wanted), $wanted[0], $wanted[-1], $flavour;
+
 print "Omitting \${dlfunc expansion tests (loadable module not present)\n"
   if $dlfunc_deleted;
 print "Omitting dbm tests (unable to copy exim_dbmbuild)\n"
@@ -3401,8 +3764,8 @@ my @test_dirs = grep { not /^CVS$/ } map { basename $_ } glob 'scripts/*'
   or die tests_exit(-1, "Failed to find test scripts in 'scripts/*`: $!");
 
 # Scan for relevant tests
-
-DIR: for ($i = 0; $i < @test_dirs; $i++)
+# HS12: Needs to be reworked.
+DIR: for (my $i = 0; $i < @test_dirs; $i++)
   {
   my($testdir) = $test_dirs[$i];
   my($wantthis) = 1;
@@ -3413,12 +3776,12 @@ DIR: for ($i = 0; $i < @test_dirs; $i++)
   # test in the next directory.
 
   next DIR if ($i < @test_dirs - 1) &&
-          ($test_start >= substr($test_dirs[$i+1], 0, 4));
+          ($wanted[0] >= substr($test_dirs[$i+1], 0, 4));
 
   # No need to carry on if the end test is less than the first test in this
   # subdirectory.
 
-  last DIR if $test_end < substr($testdir, 0, 4);
+  last DIR if $wanted[-1] < substr($testdir, 0, 4);
 
   # Check requirements, if any.
 
@@ -3452,6 +3815,40 @@ DIR: for ($i = 0; $i < @test_dirs; $i++)
         {
         if (!defined $parm_transports{$1}) { $wantthis = 0; last; }
         }
+      elsif (/^malware (.*)$/)
+        {
+        if (!defined $parm_malware{$1}) { $wantthis = 0; last; }
+        }
+      elsif (/^feature (.*)$/)
+        {
+	# move to a subroutine?
+	my $eximinfo = "$parm_exim -C $parm_cwd/test-config -DDIR=$parm_cwd -bP macro $1";
+
+	open (IN, "$parm_cwd/confs/0000") ||
+	  tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+	open (OUT, ">test-config") ||
+	  tests_exit(-1, "Couldn't open test-config: $!\n");
+	while (<IN>)
+	  {
+	  do_substitute($testno);
+	  print OUT;
+	  }
+	close(IN);
+	close(OUT);
+
+	system($eximinfo . " >/dev/null 2>&1");
+	if ($? != 0) {
+	  unlink("$parm_cwd/test-config");
+	  $wantthis = 0;
+	  $_ = "feature $1";
+	  last;
+	}
+	unlink("$parm_cwd/test-config");
+        }
+      elsif (/^ipv6-non-linklocal/)
+	{
+	if ($parm_ipv6 =~ /%/) { $wantthis = 0; last; }
+	}
       else
         {
         tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
@@ -3475,14 +3872,13 @@ DIR: for ($i = 0; $i < @test_dirs; $i++)
   # We want the tests from this subdirectory, provided they are in the
   # range that was selected.
 
-  @testlist = map { basename $_ } glob "scripts/$testdir/*";
+  @testlist = grep { $_ ~~ @wanted } grep { /^\d+(?:\.\d+)?$/ } map { basename $_ } glob "scripts/$testdir/*";
   tests_exit(-1, "Failed to read test scripts from `scripts/$testdir/*': $!")
     if not @testlist;
 
   foreach $test (@testlist)
     {
-    next if ($test !~ /^\d{4}(?:\.\d+)?$/);
-    if (!$wantthis || $test < $test_start || $test > $test_end)
+    if (!$wantthis)
       {
       log_test($log_summary_filename, $test, '.');
       }
@@ -3493,7 +3889,7 @@ DIR: for ($i = 0; $i < @test_dirs; $i++)
     }
   }
 
-print ">>Test List: @test_list\n", if $debug;
+print ">>Test List:\n", join "\n", @test_list, '' if $debug;
 
 
 ##################################################
@@ -3578,7 +3974,7 @@ if ($have_ipv4 || $have_ipv6)
     "; for queries that it cannot answer\n\n" .
     "PASS ON NOT FOUND\n\n";
   print OUT "$shortname  A     $parm_ipv4\n" if $have_ipv4;
-  print OUT "$shortname  AAAA  $parm_ipv6\n" if $have_ipv6;
+  print OUT "$shortname  AAAA  $parm_ipv6_stripped\n" if $have_ipv6;
   print OUT "\n; End\n";
   close(OUT);
   }
@@ -3586,28 +3982,39 @@ if ($have_ipv4 || $have_ipv6)
 if ($have_ipv4 && $parm_ipv4 ne "127.0.0.1")
   {
   my(@components) = $parm_ipv4 =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)/;
-  open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
-    tests_exit(-1,
-      "Failed  to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
-  print OUT "; This is a dynamically constructed fake zone file.\n" .
-    "; The zone is $components[0].in-addr.arpa.\n\n" .
-    "$components[3].$components[2].$components[1]  PTR  $parm_hostname.\n\n" .
-    "; End\n";
-  close(OUT);
+
+  if ($components[0]=='10')
+    {
+    open(OUT, ">>$parm_cwd/dnszones/db.ip4.$components[0]") ||
+      tests_exit(-1, "Failed  to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
+    print OUT "$components[3].$components[2].$components[1]  PTR  $parm_hostname.\n\n";
+    close(OUT);
+    }
+  else
+    {
+    open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
+      tests_exit(-1,
+	"Failed  to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
+    print OUT "; This is a dynamically constructed fake zone file.\n" .
+      "; The zone is $components[0].in-addr.arpa.\n\n" .
+      "$components[3].$components[2].$components[1]  PTR  $parm_hostname.\n\n" .
+      "; End\n";
+    close(OUT);
+    }
   }
 
-if ($have_ipv6 && $parm_ipv6 ne "::1")
+if ($have_ipv6 && $parm_ipv6_stripped ne "::1")
   {
-  my($exp_v6) = $parm_ipv6;
+  my($exp_v6) = $parm_ipv6_stripped;
   $exp_v6 =~ s/[^:]//g;
-  if ( $parm_ipv6 =~ /^([^:].+)::$/ ) {
+  if ( $parm_ipv6_stripped =~ /^([^:].+)::$/ ) {
     $exp_v6 = $1 . ':0' x (9-length($exp_v6));
-  } elsif ( $parm_ipv6 =~ /^(.+)::(.+)$/ ) {
+  } elsif ( $parm_ipv6_stripped =~ /^(.+)::(.+)$/ ) {
     $exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
-  } elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
+  } elsif ( $parm_ipv6_stripped =~ /^::(.+[^:])$/ ) {
     $exp_v6 = '0:' x (9-length($exp_v6)) . $1;
   } else {
-    $exp_v6 = $parm_ipv6;
+    $exp_v6 = $parm_ipv6_stripped;
   }
   my(@components) = split /:/, $exp_v6;
   my(@nibbles) = reverse (split /\s*/, shift @components);
@@ -3908,21 +4315,37 @@ foreach $test (@test_list)
 	}
         if ($force_continue)
           {
-          print "\nstderr tail:\n";
+          print "\nstdout tail:\n";
+          print "==================>\n";
+          system("tail -20 test-stdout");
+          print "===================\n";
+
+          print "stderr tail:\n";
+          print "==================>\n";
+          system("tail -30 test-stderr");
           print "===================\n";
-          system("tail -20 test-stderr");
+
+          print "stdout-server tail:\n";
+          print "==================>\n";
+          system("tail -20 test-stdout-server");
           print "===================\n";
+
+          print "stderr-server tail:\n";
+          print "==================>\n";
+          system("tail -30 test-stderr-server");
+          print "===================\n";
+
           print "... continue forced\n";
           }
 
         last if /^[rc]$/i;
         if (/^e$/i)
           {
-          system("$more test-stderr");
+          system @more => 'test-stderr';
           }
         elsif (/^o$/i)
           {
-          system("$more test-stdout");
+          system @more => 'test-stdout';
           }
         }
 
@@ -4020,7 +4443,7 @@ __END__
 
 =head1 SYNOPSIS
 
- runtest [options] [test0 [test1]]
+ runtest [exim-path] [options] [test0 [test1]]
 
 =head1 DESCRIPTION
 
@@ -4032,6 +4455,10 @@ For legacy reasons the options are not case sensitive.
 
 =over
 
+=item B<--continue>
+
+Do not stop for user interaction or on errors. (default: off)
+
 =item B<--debug>
 
 This option enables the output of debug information when running the
@@ -4040,15 +4467,12 @@ various test commands. (default: off)
 =item B<--diff>
 
 Use C<diff -u> for comparing the expected output with the produced
-output. (default: use a built-in comparation routine)
-
-=item B<--continue>
+output. (default: use a built-in routine)
 
-Do not stop for user interaction or on errors. (default: off)
-
-=item B<--update>
+=item B<--flavor>|B<--flavour> I<flavour>
 
-Automatically update the recorded (expected) data on mismatch. (default: off)
+Override the expected results for results for a specific (OS) flavour.
+(default: unused)
 
 =item B<--[no]ipv4>
 
@@ -4062,18 +4486,26 @@ Skip IPv6 related setup and tests (default: use ipv6)
 
 Keep the various output files produced during a test run. (default: don't keep)
 
+=item B<--range> I<n0> I<n1>
+
+Run tests between (including) I<n0> and I<n1>. A "+" may be used to specify the "last
+test available".
+
 =item B<--slow>
 
-Insert some delays to compensate for a slow system. (default: off)
+Insert some delays to compensate for a slow host system. (default: off)
 
-=item B<--valgrind>
+=item B<--test> I<n>
 
-Start Exim wrapped by I<valgrind>. (default: don't use valgrind)
+Run the specified test. This option may used multiple times.
 
-=item B<--flavor>|B<--flavour> I<flavour>
+=item B<--update>
 
-Override the expected results for results for a specific (OS) flavour.
-(default: unused)
+Automatically update the recorded (expected) data on mismatch. (default: off)
+
+=item B<--valgrind>
+
+Start Exim wrapped by I<valgrind>. (default: don't use valgrind)
 
 =back