X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/f4e62a871680af98f14beb5f21dbe3b85c5c35ff..6ee110613402e8562c03b4a11c3ffbdbd47bd153:/doc/doc-txt/experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 301152f1a..f748f6146 100644
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -873,84 +873,6 @@ used via the transport in question.
 
 
 
-Early pipelining support
-------------------------
-Ref: https://datatracker.ietf.org/doc/draft-harris-early-pipe/
-
-If compiled with EXPERIMENTAL_PIPE_CONNECT support is included for this feature.
-The server advertises the feature in its EHLO response, currently using the name
-"X_PIPE_CONNECT" (this will change, some time in the future).
-A client may cache this information, along with the rest of the EHLO response,
-and use it for later connections.  Those later ones can send esmtp commands before
-a banner is received.
-
-Up to 1.5 roundtrip times can be taken out of cleartext connections, 2.5 on
-STARTTLS connections.
-
-In combination with the traditional PIPELINING feature the following example
-sequences are possible (among others):
-
-(client)                (server)
-
-EHLO,MAIL,RCPT,DATA ->
-                     <- banner,EHLO-resp,MAIL-ack,RCPT-ack,DATA-goahead
-message-data        ->
-------
-
-EHLO,MAIL,RCPT,BDAT              ->
-                                  <- banner,EHLO-resp,MAIL-ack,RCPT-ack
-message-data                     ->
-------
-
-EHLO,STARTTLS                     ->
-                                   <- banner,EHLO-resp,TLS-goahead
-TLS1.2-client-hello               ->
-                                   <- TLS-server-hello,cert,hello-done
-client-Kex,change-cipher,finished ->
-                                   <- change-cipher,finished
-EHLO,MAIL,RCPT,DATA               ->
-                                   <- EHLO-resp,MAIL-ack,RCPT-ack,DATA-goahead
-
-------
-(tls-on-connect)
-TLS1.2-client-hello               ->
-                                   <- TLS-server-hello,cert,hello-done
-client-Kex,change-cipher,finished ->
-                                   <- change-cipher,finshed
-                                   <- banner
-EHLO,MAIL,RCPT,DATA               ->
-                                   <- EHLO-resp,MAIL-ack,RCPT-ack,DATA-goahead
-
-Where the initial client packet is SMTP, it can combine with the TCP Fast Open
-feature and be sent in the TCP SYN.
-
-
-A main-section option "pipelining_connect_advertise_hosts" (default: *)
-and an smtp transport option "hosts_pipe_connect" (default: unset)
-control the feature.
-
-If the "pipelining" log_selector is enabled, the "L" field in server <=
-log lines has a period appended if the feature was advertised but not used;
-or has an asterisk appended if the feature was used.  In client => lines
-the "L" field has an asterisk appended if the feature was used.
-
-The "retry_data_expire" option controls cache invalidation.
-Entries are also rewritten (or cleared) if the adverised features
-change.
-
-
-NOTE: since the EHLO command must be constructed before the connection is
-made it cannot depend on the interface IP address that will be used.
-Transport configurations should be checked for this.  An example avoidance:
-
- helo_data =	${if def:sending_ip_address \
-		   {${lookup dnsdb{>! ptr=$sending_ip_address} \
-			{${sg{$value} {^([^!]*).*\$} {\$1}}} fail}} \
-		   {$primary_hostname}}
-
-
-
-
 TLS Session Resumption
 ----------------------
 TLS Session Resumption for TLS 1.2 and TLS 1.3 connections can be used (defined