X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/d223e9344978ee88ad04a231f00f7540d2b841e2..fc40c83e9317fa75523e9b558c13309e3e1c9d9a:/doc/doc-docbook/spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index b670c1ff9..622e5272d 100644
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -2627,6 +2627,8 @@ users to set envelope senders.
 
 .cindex "&'From:'& header line"
 .cindex "&'Sender:'& header line"
+.cindex "header lines" "From:"
+.cindex "header lines" "Sender:"
 For a trusted user, there is never any check on the contents of the &'From:'&
 header line, and a &'Sender:'& line is never added. Furthermore, any existing
 &'Sender:'& line in incoming local (non-TCP/IP) messages is not removed.
@@ -3049,7 +3051,8 @@ trusted user for the sender of a message to be set in this way.
 .oindex "&%-bmalware%&"
 .cindex "testing", "malware"
 .cindex "malware scan test"
-This debugging option causes Exim to scan the given file,
+This debugging option causes Exim to scan the given file or directory
+(depending on the used scanner interface),
 using the malware scanning framework.  The option of &%av_scanner%& influences
 this option, so if &%av_scanner%&'s value is dependent upon an expansion then
 the expansion should have defaults which apply to this invocation.  ACLs are
@@ -3824,6 +3827,14 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 remote host supports the ESMTP &_DSN_& extension.
 
+.new
+.vitem &%-MCG%&
+.oindex "&%-MCG%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that an
+alternate queue is used, named by the following option.
+.wen
+
 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally
@@ -4370,7 +4381,10 @@ relax this restriction (and also the same requirement for the &%-M%&, &%-R%&,
 and &%-S%& options).
 
 .cindex "queue runner" "description of operation"
-The &%-q%& option starts one queue runner process. This scans the queue of
+.new
+If other commandline options do not specify an action,
+.wen
+the &%-q%& option starts one queue runner process. This scans the queue of
 waiting messages, and runs a delivery process for each one in turn. It waits
 for each delivery process to finish before starting the next one. A delivery
 process may not actually do any deliveries if the retry times for the addresses
@@ -4455,8 +4469,29 @@ The &'l'& (the letter &"ell"&) flag specifies that only local deliveries are to
 be done. If a message requires any remote deliveries, it remains on the queue
 for later delivery.
 
-.vitem &%-q%&<&'qflags'&>&~<&'start&~id'&>&~<&'end&~id'&>
+.new
+.vitem &%-q[q][i][f[f]][l][G<name>[/<time>]]]%&
+.oindex "&%-qG%&"
+.cindex queue named
+.cindex "named queues"
 .cindex "queue" "delivering specific messages"
+If the &'G'& flag and a name is present, the queue runner operates on the
+queue with the given name rather than the default queue.
+The name should not contain a &'/'& character.
+For a periodic queue run (see below)
+append to the name a slash and a time value.
+
+If other commandline options speicify an action, a &'-qG<name>'& option
+will specify a queue to operate on.
+For example:
+.code
+exim -bp -qGquarantine
+mailq -qGquarantime
+exim -qGoffpeak -Rf @special.domain.example
+.endd
+.wen
+
+.vitem &%-q%&<&'qflags'&>&~<&'start&~id'&>&~<&'end&~id'&>
 When scanning the queue, Exim can be made to skip over messages whose ids are
 lexically less than a given value by following the &%-q%& option with a
 starting message id. For example:
@@ -5101,7 +5136,11 @@ with the characters &"0x"&, in which case the remainder is interpreted as a
 hexadecimal number.
 
 If an integer value is followed by the letter K, it is multiplied by 1024; if
-it is followed by the letter M, it is multiplied by 1024x1024. When the values
+it is followed by the letter M, it is multiplied by 1024x1024;
+.new
+if by the letter G, 1024x1024x1024.
+.wen
+When the values
 of integer option settings are output, values which are an exact multiple of
 1024 or 1024x1024 are sometimes, but not always, printed using the letters K
 and M. The printing style is independent of the actual input format that was
@@ -6147,7 +6186,8 @@ errors:
 This causes any temporarily failing address to be retried every 15 minutes for
 2 hours, then at intervals starting at one hour and increasing by a factor of
 1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
-is not delivered after 4 days of temporary failure, it is bounced.
+is not delivered after 4 days of temporary failure, it is bounced. The time is
+measured from first failure, not from the time the message was received.
 
 If the retry section is removed from the configuration, or is empty (that is,
 if no retry rules are defined), Exim will not retry deliveries. This turns
@@ -6609,7 +6649,7 @@ lookup types support only literal keys.
 .endlist ilist
 
 
-.section "Query-style lookup types" "SECID62"
+.section "Query-style lookup types" "SECTquerystylelookups"
 .cindex "lookup" "query-style types"
 .cindex "query-style lookup" "list of types"
 The supported query-style lookup types are listed below. Further details about
@@ -7773,7 +7813,14 @@ domain, host, address and local part lists.
 
 .section "Expansion of lists" "SECTlistexpand"
 .cindex "expansion" "of lists"
-Each list is expanded as a single string before it is used. The result of
+Each list is expanded as a single string before it is used.
+
+.new
+&'Exception: the router headers_remove option, where list-item
+splitting is done before string-expansion.'&
+.wen
+
+The result of
 expansion must be a list, possibly containing empty items, which is split up
 into separate items for matching. By default, colon is the separator character,
 but this can be varied if necessary. See sections &<<SECTlistconstruct>>& and
@@ -9172,8 +9219,8 @@ The environment is adjusted by the &%keep_environment%& and
 .cindex "&%extract%&" "substrings by key"
 The key and <&'string1'&> are first expanded separately. Leading and trailing
 white space is removed from the key (but not from any of the strings). The key
-must not consist entirely of digits. The expanded <&'string1'&> must be of the
-form:
+must not be empty and must not consist entirely of digits.
+The expanded <&'string1'&> must be of the form:
 .display
 <&'key1'&> = <&'value1'&>  <&'key2'&> = <&'value2'&> ...
 .endd
@@ -10049,6 +10096,21 @@ Last:user@example.com
 user@example.com
 .endd
 
+.new
+.vitem &*${base32:*&<&'digits'&>&*}*&
+.cindex "&%base32%& expansion item"
+.cindex "expansion" "conversion to base 32"
+The string must consist entirely of decimal digits. The number is converted to
+base 32 and output as a (empty, for zero) string of characters.
+Only lowercase letters are used.
+
+.vitem &*${base32d:*&<&'base-32&~digits'&>&*}*&
+.cindex "&%base32d%& expansion item"
+.cindex "expansion" "conversion to base 32"
+The string must consist entirely of base-32 digits.
+The number is converted to decimal and output as a string.
+.wen
+
 .vitem &*${base62:*&<&'digits'&>&*}*&
 .cindex "&%base62%& expansion item"
 .cindex "expansion" "conversion to base 62"
@@ -10100,6 +10162,15 @@ escape sequences starting with a backslash. Whether characters with the most
 significant bit set (so-called &"8-bit characters"&) count as printing or not
 is controlled by the &%print_topbitchars%& option.
 
+.new
+.vitem &*${escape8bit:*&<&'string'&>&*}*&
+.cindex "expansion" "escaping 8-bit characters"
+.cindex "&%escape8bit%& expansion item"
+If the string contains and characters with the most significant bit set,
+they are converted to escape sequences starting with a backslash.
+Backslashes and DEL characters are also converted.
+.wen
+
 
 .vitem &*${eval:*&<&'string'&>&*}*&&~and&~&*${eval10:*&<&'string'&>&*}*&
 .cindex "expansion" "expression evaluation"
@@ -10473,7 +10544,7 @@ variables or headers inside regular expressions.
 .cindex "SHA-1 hash"
 .cindex "expansion" "SHA-1 hashing"
 .cindex certificate fingerprint
-.cindex "&%sha2%& expansion item"
+.cindex "&%sha1%& expansion item"
 The &%sha1%& operator computes the SHA-1 hash value of the string, and returns
 it as a 40-digit hexadecimal number, in which any letters are in upper case.
 
@@ -10481,16 +10552,38 @@ If the string is a single variable of type certificate,
 returns the SHA-1 hash fingerprint of the certificate.
 
 
-.vitem &*${sha256:*&<&'certificate'&>&*}*&
+.vitem &*${sha256:*&<&'string'&>&*}*&
 .cindex "SHA-256 hash"
 .cindex certificate fingerprint
 .cindex "expansion" "SHA-256 hashing"
 .cindex "&%sha256%& expansion item"
-The &%sha256%& operator computes the SHA-256 hash fingerprint of the
-certificate,
+.new
+The &%sha256%& operator computes the SHA-256 hash value of the string
 and returns
 it as a 64-digit hexadecimal number, in which any letters are in upper case.
-Only arguments which are a single variable of certificate type are supported.
+.wen
+
+If the string is a single variable of type certificate,
+returns the SHA-256 hash fingerprint of the certificate.
+
+
+.new
+.vitem &*${sha3:*&<&'string'&>&*}*& &&&
+       &*${sha3_<n>:*&<&'string'&>&*}*&
+.cindex "SHA3 hash"
+.cindex "expansion" "SHA3 hashing"
+.cindex "&%sha3%& expansion item"
+The &%sha3%& operator computes the SHA3-256 hash value of the string
+and returns
+it as a 64-digit hexadecimal number, in which any letters are in upper case.
+
+If a number is appended, separated by an underbar, it specifies
+the output length.  Values of 224, 256, 384 and 512 are accepted;
+with 256 being the default.
+
+The &%sha3%& expansion item is only supported if Exim has been
+compiled with GnuTLS 3.5.0 or later.
+.wen
 
 
 .vitem &*${stat:*&<&'string'&>&*}*&
@@ -12139,6 +12232,7 @@ a single-component name, Exim calls &[gethostbyname()]& (or
 qualified host name. See also &$smtp_active_hostname$&.
 
 
+.new
 .vitem &$proxy_external_address$& &&&
        &$proxy_external_port$& &&&
        &$proxy_local_address$& &&&
@@ -12147,6 +12241,7 @@ qualified host name. See also &$smtp_active_hostname$&.
 These variables are only available when built with Proxy Protocol
 or Socks5 support
 For details see chapter &<<SECTproxyInbound>>&.
+.wen
 
 .vitem &$prdr_requested$&
 .cindex "PRDR" "variable for"
@@ -12177,6 +12272,14 @@ The value set for the &%qualify_domain%& option in the configuration file.
 The value set for the &%qualify_recipient%& option in the configuration file,
 or if not set, the value of &$qualify_domain$&.
 
+.new
+.vitem &$queue_name$&
+.vindex &$queue_name$&
+.cindex "named queues"
+.cindex queues named
+The name of the spool queue in use; empty for the default queue.
+.wen
+
 .vitem &$rcpt_count$&
 .vindex "&$rcpt_count$&"
 When a message is being received by SMTP, this variable contains the number of
@@ -12765,7 +12868,7 @@ When a message is received from a remote host over an encrypted SMTP
 connection, this variable is set to the cipher suite that was negotiated, for
 example DES-CBC3-SHA. In other circumstances, in particular, for message
 received over unencrypted connections, the variable is empty. Testing
-&$tls_cipher$& for emptiness is one way of distinguishing between encrypted and
+&$tls_in_cipher$& for emptiness is one way of distinguishing between encrypted and
 non-encrypted connections during ACL processing.
 
 The deprecated &$tls_cipher$& variable is the same as &$tls_in_cipher$& during message reception,
@@ -13728,6 +13831,7 @@ See also the &'Policy controls'& section above.
 .table2
 .row &%accept_8bitmime%&             "advertise 8BITMIME"
 .row &%auth_advertise_hosts%&        "advertise AUTH to these hosts"
+.row &%chunking_advertise_hosts%&    "advertise CHUNKING to these hosts"
 .row &%dsn_advertise_hosts%&         "advertise DSN extensions to these hosts"
 .row &%ignore_fromline_hosts%&       "allow &""From ""& from these hosts"
 .row &%ignore_fromline_local%&       "allow &""From ""& from local SMTP"
@@ -14285,6 +14389,15 @@ For non-SMTP input and for batched SMTP input, the test is done at start-up; on
 failure a message is written to stderr and Exim exits with a non-zero code, as
 it obviously cannot send an error message of any kind.
 
+.new
+.option chunking_advertise_hosts main "host list&!!" *
+.cindex CHUNKING advertisement
+.cindex "RFC 3030" "CHUNKING"
+The CHUNKING extension (RFC3030) will be advertised in the EHLO message to
+these hosts.
+Hosts may use the BDAT command as an alternate to DATA.
+.wen
+
 .option daemon_smtp_ports main string &`smtp`&
 .cindex "port" "for daemon"
 .cindex "TCP/IP" "setting listening ports"
@@ -15887,7 +16000,7 @@ large list. In most situations, &%queue_run_in_order%& should not be set.
 
 
 
-.option queue_run_max main integer 5
+.option queue_run_max main integer&!! 5
 .cindex "queue runner" "maximum number of"
 This controls the maximum number of queue runner processes that an Exim daemon
 can run simultaneously. This does not mean that it starts them all at once,
@@ -15902,6 +16015,13 @@ the limit, allowing any number of simultaneous queue runner processes to be
 run. If you do not want queue runs to occur, omit the &%-q%&&'xx'& setting on
 the daemon's command line.
 
+.new
+.cindex queues named
+.cindex "named queues"
+To set limits for different named queues use
+an expansion depending on the &$queue_name$& variable.
+.wen
+
 .option queue_smtp_domains main "domain list&!!" unset
 .cindex "queueing incoming messages"
 .cindex "message" "queueing remote deliveries"
@@ -16832,8 +16952,8 @@ of the STARTTLS command to set up an encrypted session is advertised in
 response to EHLO only to those client hosts that match this option. See
 chapter &<<CHAPTLS>>& for details of Exim's support for TLS.
 Note that the default value requires that a certificate be supplied
-using the &%tls_certificate%& option.  If no certificate is available then
-the &%tls_advertise_hosts%& option should be set empty.
+using the &%tls_certificate%& option.  If TLS support for incoming connections
+is not required the &%tls_advertise_hosts%& option should be set empty.
 
 
 .option tls_certificate main string&!! unset
@@ -16854,6 +16974,11 @@ if the OpenSSL build supports TLS extensions and the TLS client sends the
 Server Name Indication extension, then this option and others documented in
 &<<SECTtlssni>>& will be re-expanded.
 
+.new
+If this option is unset or empty a fresh self-signed certificate will be
+generated for every connection.
+.wen
+
 .option tls_crl main string&!! unset
 .cindex "TLS" "server certificate revocation list"
 .cindex "certificate" "revocation list for server"
@@ -16912,7 +17037,7 @@ in IKE is assigned number 23.
 
 Otherwise, the option must expand to the name used by Exim for any of a number
 of DH primes specified in RFC 2409, RFC 3526 and RFC 5114.  As names, Exim uses
-"ike" followed by the number used by IKE, of "default" which corresponds to
+"ike" followed by the number used by IKE, or "default" which corresponds to
 "ike23".
 
 The available primes are:
@@ -17487,7 +17612,7 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence.
 .cindex "DNSSEC" "MX lookup"
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
-DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+DNS lookups for domains matching &%dnssec_require_domains%& will be done with
 the dnssec request bit set.  Any returns not having the Authenticated Data bit
 (AD bit) set will be ignored and logged as a host-lookup failure.
 This applies to all of the SRV, MX, AAAA, A lookup sequence.
@@ -19788,12 +19913,17 @@ list1:   :include:/opt/lists/list1
 .endd
 .next
 .cindex "address redirection" "to black hole"
-Sometimes you want to throw away mail to a particular local part. Making the
-&%data%& option expand to an empty string does not work, because that causes
-the router to decline. Instead, the alias item
+.cindex "delivery" "discard"
+.cindex "delivery" "blackhole"
 .cindex "black hole"
 .cindex "abandoning mail"
-&':blackhole:'& can be used. It does what its name implies. No delivery is
+Sometimes you want to throw away mail to a particular local part.  Making the
+&%data%& option expand to an empty string does not work, because that causes
+the router to decline. Instead, the alias item
+.code
+:blackhole:
+.endd
+can be used. It does what its name implies. No delivery is
 done, and no error message is generated. This has the same effect as specifying
 &_/dev/null_& as a destination, but it can be independently disabled.
 
@@ -20763,7 +20893,7 @@ is forced to fail, no action is taken. Other expansion failures are treated as
 errors and cause the delivery to be deferred.
 
 Unlike most options, &%headers_remove%& can be specified multiple times
-for a router; all listed headers are removed.
+for a transport; all listed headers are removed.
 
 &*Warning*&: Because of the separate expansion of the list items,
 items that contain a list separator must have it doubled.
@@ -23531,7 +23661,7 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence.
 .cindex "DNSSEC" "MX lookup"
 .cindex "security" "MX lookup"
 .cindex "DNS" "DNSSEC"
-DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+DNS lookups for domains matching &%dnssec_require_domains%& will be done with
 the dnssec request bit set.  Any returns not having the Authenticated Data bit
 (AD bit) set will be ignored and logged as a host-lookup failure.
 This applies to all of the SRV, MX, AAAA, A lookup sequence.
@@ -23786,6 +23916,16 @@ connects. If authentication fails, Exim will try to transfer the message
 unauthenticated. See also &%hosts_require_auth%&, and chapter
 &<<CHAPSMTPAUTH>>& for details of authentication.
 
+.new
+.option hosts_try_chunking smtp "host list&!!" *
+.cindex CHUNKING "enabling, in client"
+.cindex BDAT "SMTP command"
+.cindex "RFC 3030" "CHUNKING"
+This option provides a list of server to which, provided they announce
+CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
+BDAT will not be used in conjuction with a transport filter.
+.wen
+
 .option hosts_try_prdr smtp "host list&!!" *
 .cindex "PRDR" "enabling, optional in client"
 This option provides a list of servers to which, provided they announce
@@ -26901,7 +27041,8 @@ Documentation of the strings accepted may be found in the GnuTLS manual, under
 &url(http://www.gnutls.org/manual/html_node/Priority-Strings.html),
 but beware that this relates to GnuTLS 3, which may be newer than the version
 installed on your system.  If you are using GnuTLS 3,
-&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string, then the example code)
+then the example code
+&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string)
 on that site can be used to test a given string.
 
 For example:
@@ -26946,10 +27087,17 @@ with the error
 If a STARTTLS command is issued within an existing TLS session, it is
 rejected with a 554 error code.
 
-To enable TLS operations on a server, you must set &%tls_advertise_hosts%& to
-match some hosts. You can, of course, set it to * to match all hosts.
-However, this is not all you need to do. TLS sessions to a server won't work
-without some further configuration at the server end.
+To enable TLS operations on a server, the &%tls_advertise_hosts%& option
+must be set to match some hosts. The default is * which matches all hosts.
+
+.new
+If this is all you do, TLS encryption will be enabled but not authentication -
+meaning that the peer has no assurance it is actually you he is talking to.
+You gain protection from a passive sniffer listening on the wire but not
+from someone able to intercept the communication.
+.wen
+
+Further protection requires some further configuration at the server end.
 
 It is rumoured that all existing clients that support TLS/SSL use RSA
 encryption. To make this work you need to set, in the server,
@@ -27648,6 +27796,17 @@ received, before the final response to the DATA command is sent. This is
 the ACL specified by &%acl_smtp_data%&, which is the second ACL that is
 associated with the DATA command.
 
+.new
+.cindex CHUNKING "BDAT command"
+.cindex BDAT "SMTP command"
+.cindex "RFC 3030" CHUNKING
+If CHUNKING was advertised and a BDAT command sequence is received,
+the &%acl_smtp_predata%& ACL is not run.
+. XXX why not?  It should be possible, for the first BDAT.
+The &%acl_smtp_data%& is run after the last BDAT command and all of
+the data specified is received.
+.wen
+
 For both of these ACLs, it is not possible to reject individual recipients. An
 error response rejects the entire message. Unfortunately, it is known that some
 MTAs do not treat hard (5&'xx'&) responses to the DATA command (either
@@ -27969,7 +28128,7 @@ provides a means of specifying an &"and"& conjunction between conditions. For
 example:
 .code
 deny  dnslists = list1.example
-dnslists = list2.example
+      dnslists = list2.example
 .endd
 If there are no conditions, the verb is always obeyed. Exim stops evaluating
 the conditions and modifiers when it reaches a condition that fails. What
@@ -27991,8 +28150,8 @@ after &%endpass%&, the ACL returns &"deny"&. Consider this statement, used to
 check a RCPT command:
 .code
 accept domains = +local_domains
-endpass
-verify = recipient
+       endpass
+       verify = recipient
 .endd
 If the recipient domain does not match the &%domains%& condition, control
 passes to the next statement. If it does match, the recipient is verified, and
@@ -28544,6 +28703,19 @@ all the conditions are true, wherever it appears in an ACL command, whereas
 effect.
 
 
+.new
+.vitem &*queue*&&~=&~<&'text'&>
+This modifier specifies the use of a named queue for spool files
+for the message.
+It can only be used before the message is received (i.e. not in
+the DATA ACL).
+This could be used, for example, for known high-volume burst sources
+of traffic, or for quarantine of messages.
+Separate queue-runner processes will be needed for named queues.
+If the text after expansion is empty, the default queue is used.
+.wen
+
+
 .vitem &*remove_header*&&~=&~<&'text'&>
 This modifier specifies one or more header names in a colon-separated list
  that are to be removed from an incoming message, assuming, of course, that
@@ -28688,13 +28860,18 @@ with &`-d`&, with the output going to a new logfile, by default called
 &'debuglog'&.  The filename can be adjusted with the &'tag'& option, which
 may access any variables already defined.  The logging may be adjusted with
 the &'opts'& option, which takes the same values as the &`-d`& command-line
-option.  Some examples (which depend on variables that don't exist in all
+option.
+.new
+Logging may be stopped, and the file removed, with the &'kill'& option.
+.wen
+Some examples (which depend on variables that don't exist in all
 contexts):
 .code
       control = debug
       control = debug/tag=.$sender_host_address
       control = debug/opts=+expand+acl
       control = debug/tag=.$message_exim_id/opts=+expand
+      control = debug/kill
 .endd
 
 
@@ -28933,7 +29110,7 @@ any ACL verb, including &%deny%& (though this is potentially useful only in a
 RCPT ACL).
 
 Headers will not be added to the message if the modifier is used in
-DATA, MIME or DKIM ACLs for messages delivered by cutthrough routing.
+DATA, MIME or DKIM ACLs for a message delivered by cutthrough routing.
 
 Leading and trailing newlines are removed from
 the data for the &%add_header%& modifier; if it then
@@ -29034,8 +29211,8 @@ receiving a message). The message must ultimately be accepted for
 with any ACL verb, including &%deny%&, though this is really not useful for
 any verb that doesn't result in a delivered message.
 
-Headers will not be removed to the message if the modifier is used in
-DATA, MIME or DKIM ACLs for messages delivered by cutthrough routing.
+Headers will not be removed from the message if the modifier is used in
+DATA, MIME or DKIM ACLs for a message delivered by cutthrough routing.
 
 More than one header can be removed at the same time by using a colon separated
 list of header names. The header matching is case insensitive. Wildcards are
@@ -31413,7 +31590,7 @@ condition defers.
 
 Unix and TCP socket specifications may be mixed in any order.
 Each element of the list is a list itself, space-separated by default
-and changeable in the usual way.
+and changeable in the usual way; take care to not double the separator.
 
 For TCP socket specifications a host name or IP (v4 or v6, but
 subject to list-separator quoting rules) address can be used,
@@ -31540,6 +31717,11 @@ spam bar is 50 characters.
 A multiline text table, containing the full SpamAssassin report for the
 message. Useful for inclusion in headers or reject messages.
 This variable is only usable in a DATA-time ACL.
+.new
+Beware that SpamAssassin may return non-ASCII characters, especially
+when running in country-specific locales, which are not legal
+unencoded in headers.
+.wen
 
 .vitem &$spam_action$&
 For SpamAssassin either 'reject' or 'no action' depending on the
@@ -33125,6 +33307,7 @@ incoming SMTP message from a source that is not permitted to send them.
 
 .section "Resent- header lines" "SECID220"
 .cindex "&%Resent-%& header lines"
+.cindex "header lines" "Resent-"
 RFC 2822 makes provision for sets of header lines starting with the string
 &`Resent-`& to be added to a message when it is resent by the original
 recipient to somebody else. These headers are &'Resent-Date:'&,
@@ -33181,6 +33364,7 @@ existing &'Bcc:'& is not removed.
 
 .section "The Date: header line" "SECID223"
 .cindex "&'Date:'& header line"
+.cindex "header lines" "Date:"
 If a locally-generated or submission-mode message has no &'Date:'& header line,
 Exim adds one, using the current date and time, unless the
 &%suppress_local_fixups%& control has been specified.
@@ -33198,6 +33382,7 @@ messages.
 
 .section "The Envelope-to: header line" "SECID225"
 .cindex "&'Envelope-to:'& header line"
+.cindex "header lines" "Envelope-to:"
 .oindex "&%envelope_to_remove%&"
 &'Envelope-to:'& header lines are not part of the standard RFC 2822 header set.
 Exim can be configured to add them to the final delivery of messages. (See the
@@ -33209,6 +33394,7 @@ messages.
 
 .section "The From: header line" "SECTthefrohea"
 .cindex "&'From:'& header line"
+.cindex "header lines" "From:"
 .cindex "Sendmail compatibility" "&""From""& line"
 .cindex "message" "submission"
 .cindex "submission mode"
@@ -33252,6 +33438,7 @@ name as described in section &<<SECTconstr>>&.
 
 .section "The Message-ID: header line" "SECID226"
 .cindex "&'Message-ID:'& header line"
+.cindex "header lines" "Message-ID:"
 .cindex "message" "submission"
 .oindex "&%message_id_header_text%&"
 If a locally-generated or submission-mode incoming message does not contain a
@@ -33267,6 +33454,7 @@ in this header line by setting the &%message_id_header_text%& and/or
 
 .section "The Received: header line" "SECID227"
 .cindex "&'Received:'& header line"
+.cindex "header lines" "Received:"
 A &'Received:'& header line is added at the start of every message. The
 contents are defined by the &%received_header_text%& configuration option, and
 Exim automatically adds a semicolon and a timestamp to the configured string.
@@ -33283,6 +33471,7 @@ changed to the time of acceptance, which is (apart from a small delay while the
 
 .section "The References: header line" "SECID228"
 .cindex "&'References:'& header line"
+.cindex "header lines" "References:"
 Messages created by the &(autoreply)& transport include a &'References:'&
 header line. This is constructed according to the rules that are described in
 section 3.64 of RFC 2822 (which states that replies should contain such a
@@ -33297,6 +33486,7 @@ incoming message. If there are more than 12, the first one and then the final
 
 .section "The Return-path: header line" "SECID229"
 .cindex "&'Return-path:'& header line"
+.cindex "header lines" "Return-path:"
 .oindex "&%return_path_remove%&"
 &'Return-path:'& header lines are defined as something an MTA may insert when
 it does the final delivery of messages. (See the generic &%return_path_add%&
@@ -33309,6 +33499,7 @@ default), Exim removes &'Return-path:'& header lines from incoming messages.
 .section "The Sender: header line" "SECTthesenhea"
 .cindex "&'Sender:'& header line"
 .cindex "message" "submission"
+.cindex "header lines" "Sender:"
 For a locally-originated message from an untrusted user, Exim may remove an
 existing &'Sender:'& header line, and it may add a new one. You can modify
 these actions by setting the &%local_sender_retain%& option true, the
@@ -35277,6 +35468,7 @@ picked out by the distinctive two-character flags that immediately follow the
 timestamp. The flags are:
 .display
 &`<=`&     message arrival
+&`(=`&     message fakereject
 &`=>`&     normal message delivery
 &`->`&     additional address in same delivery
 &`>>`&     cutthrough message delivery
@@ -35504,14 +35696,18 @@ the following table:
 &`CV  `&        certificate verification status
 &`D   `&        duration of &"no mail in SMTP session"&
 &`DN  `&        distinguished name from peer certificate
+&`DS  `&        DNSSEC secured lookups
 &`DT  `&        on &`=>`& lines: time taken for a delivery
 &`F   `&        sender address (on delivery lines)
 &`H   `&        host name and IP address
 &`I   `&        local interface used
+&`K   `&        CHUNKING extension used
 &`id  `&        message id for incoming message
 &`P   `&        on &`<=`& lines: protocol used
 &`    `&        on &`=>`& and &`**`& lines: return path
-&`PRX `&        on &'<='& and&`=>`& lines: proxy address
+&`PRDR`&        PRDR extension used
+&`PRX `&        on &'<='& and &`=>`& lines: proxy address
+&`Q   `&        alternate queue name
 &`QT  `&        on &`=>`& lines: time spent on queue so far
 &`    `&        on &"Completed"& lines: time spent on queue
 &`R   `&        on &`<=`& lines: reference for local bounce
@@ -35594,6 +35790,7 @@ selection marked by asterisks:
 &` deliver_time               `&  time taken to perform delivery
 &` delivery_size              `&  add &`S=`&&'nnn'& to => lines
 &`*dnslist_defer              `&  defers of DNS list (aka RBL) lookups
+&` dnssec                     `&  DNSSEC secured lookups
 &`*etrn                       `&  ETRN commands
 &`*host_lookup_failed         `&  as it says
 &` ident_timeout              `&  timeout for ident connection
@@ -35701,6 +35898,14 @@ the &"=>"& line, tagged with S=.
 &%dnslist_defer%&: A log entry is written if an attempt to look up a host in a
 DNS black list suffers a temporary error.
 .next
+.cindex log dnssec
+.cindex dnssec logging
+&%dnssec%&: For message acceptance and (attempted) delivery log lines, when
+dns lookups gave secure results a tag of DS is added.
+For acceptance this covers the reverse and forward lookups for host name verification.
+It does not cover helo-name verification.
+For delivery this covers the SRV, MX, A and/or AAAA lookups.
+.next
 .cindex "log" "ETRN commands"
 .cindex "ETRN" "logging"
 &%etrn%&: Every valid ETRN command that is received is logged, before the ACL
@@ -37900,14 +38105,14 @@ DKIM is documented in RFC 4871.
 DKIM support is compiled into Exim by default if TLS support is present.
 It can be disabled by setting DISABLE_DKIM=yes in &_Local/Makefile_&.
 
-Exim's DKIM implementation allows to
+Exim's DKIM implementation allows for
 .olist
-Sign outgoing messages: This function is implemented in the SMTP transport.
+Signing outgoing messages: This function is implemented in the SMTP transport.
 It can co-exist with all other Exim features
 (including transport filters)
 except cutthrough delivery.
 .next
-Verify signatures in incoming messages: This is implemented by an additional
+Verifying signatures in incoming messages: This is implemented by an additional
 ACL (acl_smtp_dkim), which can be called several times per message, with
 different signature contexts.
 .endlist
@@ -37936,7 +38141,7 @@ senders).
 .section "Signing outgoing messages" "SECDKIMSIGN"
 .cindex "DKIM" "signing"
 
-Signing is implemented by setting private options on the SMTP transport.
+Signing is enabled by setting private options on the SMTP transport.
 These options take (expandable) strings as arguments.
 
 .option dkim_domain smtp string&!! unset
@@ -37993,7 +38198,7 @@ used.
 .section "Verifying DKIM signatures in incoming mail" "SECID514"
 .cindex "DKIM" "verification"
 
-Verification of DKIM signatures in incoming email is implemented via the
+Verification of DKIM signatures in SMTP incoming email is implemented via the
 &%acl_smtp_dkim%& ACL. By default, this ACL is called once for each
 syntactically(!) correct signature in the incoming message.
 A missing ACL definition defaults to accept.
@@ -38046,6 +38251,7 @@ available (from most to least important):
 The signer that is being evaluated in this ACL run. This can be a domain or
 an identity. This is one of the list items from the expanded main option
 &%dkim_verify_signers%& (see above).
+
 .vitem &%$dkim_verify_status%&
 A string describing the general status of the signature. One of
 .ilist
@@ -38060,6 +38266,7 @@ available in &%$dkim_verify_reason%&.
 .next
 &%pass%&: The signature passed verification. It is valid.
 .endlist
+
 .vitem &%$dkim_verify_reason%&
 A string giving a little bit more detail when &%$dkim_verify_status%& is either
 "fail" or "invalid". One of
@@ -38079,51 +38286,73 @@ could not be verified. This may mean that headers were modified,
 re-written or otherwise changed in a way which is incompatible with
 DKIM verification. It may of course also mean that the signature is forged.
 .endlist
+
 .vitem &%$dkim_domain%&
 The signing domain. IMPORTANT: This variable is only populated if there is
 an actual signature in the message for the current domain or identity (as
 reflected by &%$dkim_cur_signer%&).
+
 .vitem &%$dkim_identity%&
 The signing identity, if present. IMPORTANT: This variable is only populated
 if there is an actual signature in the message for the current domain or
 identity (as reflected by &%$dkim_cur_signer%&).
+
 .vitem &%$dkim_selector%&
 The key record selector string.
+
 .vitem &%$dkim_algo%&
 The algorithm used. One of 'rsa-sha1' or 'rsa-sha256'.
+
 .vitem &%$dkim_canon_body%&
 The body canonicalization method. One of 'relaxed' or 'simple'.
+
 .vitem &%dkim_canon_headers%&
 The header canonicalization method. One of 'relaxed' or 'simple'.
+
 .vitem &%$dkim_copiedheaders%&
 A transcript of headers and their values which are included in the signature
 (copied from the 'z=' tag of the signature).
+.new
+Note that RFC6376 requires that verification fail if the From: header is
+not included in the signature.  Exim does not enforce this; sites wishing
+strict enforcement should code the check explicitly.
+.wen
+
 .vitem &%$dkim_bodylength%&
 The number of signed body bytes. If zero ("0"), the body is unsigned. If no
 limit was set by the signer, "9999999999999" is returned. This makes sure
 that this variable always expands to an integer value.
+
 .vitem &%$dkim_created%&
 UNIX timestamp reflecting the date and time when the signature was created.
 When this was not specified by the signer, "0" is returned.
+
 .vitem &%$dkim_expires%&
 UNIX timestamp reflecting the date and time when the signer wants the
 signature to be treated as "expired". When this was not specified by the
 signer, "9999999999999" is returned. This makes it possible to do useful
 integer size comparisons against this value.
+
 .vitem &%$dkim_headernames%&
 A colon-separated list of names of headers included in the signature.
+
 .vitem &%$dkim_key_testing%&
 "1" if the key record has the "testing" flag set, "0" if not.
+
 .vitem &%$dkim_key_nosubdomains%&
 "1" if the key record forbids subdomaining, "0" otherwise.
+
 .vitem &%$dkim_key_srvtype%&
 Service type (tag s=) from the key record. Defaults to "*" if not specified
 in the key record.
+
 .vitem &%$dkim_key_granularity%&
 Key granularity (tag g=) from the key record. Defaults to "*" if not specified
 in the key record.
+
 .vitem &%$dkim_key_notes%&
 Notes from the key record (tag n=).
+
 .vitem &%$dkim_key_length%&
 Number of bits in the key.
 .endlist
@@ -38203,6 +38432,7 @@ Use of a proxy is enabled by setting the &%hosts_proxy%&
 main configuration option to a hostlist; connections from these
 hosts will use Proxy Protocol.
 
+.new
 The following expansion variables are usable
 (&"internal"& and &"external"& here refer to the interfaces
 of the proxy):
@@ -38215,6 +38445,7 @@ of the proxy):
 .endd
 If &$proxy_session$& is set but &$proxy_external_address$& is empty
 there was a protocol error.
+.wen
 
 Since the real connections are all coming from the proxy, and the
 per host connection tracking is done before Proxy Protocol is
@@ -38353,7 +38584,7 @@ form of the name.
 Log lines and Received-by: header lines will acquire a "utf8"
 prefix on the protocol element, eg. utf8esmtp.
 
-The following expansion operator can be used:
+The following expansion operators can be used:
 .code
 ${utf8_domain_to_alabel:str}
 ${utf8_domain_from_alabel:str}