X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/cc49c6977b5736353b07e174b0fbb01086097f80..4bcc0ff50b9dd7fceded6164b554861dab8ea751:/test/runtest

diff --git a/test/runtest b/test/runtest
index be35e157f..994ff9ff8 100755
--- a/test/runtest
+++ b/test/runtest
@@ -893,7 +893,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # The sizes of filter files may vary because of the substitution of local
   # filenames, logins, etc.
 
-  s/^\d+(?= bytes read from )/ssss/;
+  s/^\d+(?= (\(tainted\) )?bytes read from )/ssss/;
 
 
   # ======== OpenSSL error messages ========
@@ -933,14 +933,17 @@ RESET_AFTER_EXTRA_LINE_READ:
   last if !defined $_;
 
 
+  # SRS timestamps and signatures vary by hostname and from run to run
+
+  s/SRS0=....=..=[^=]+=[^@]+\@test.ex/SRS0=ZZZZ=YY=the.local.host.name=CALLER\@test.ex/;
+
+
   # ======== Output from the "fd" program about open descriptors ========
   # The statuses seem to be different on different operating systems, but
   # at least we'll still be checking the number of open fd's.
 
   s/max fd = \d+/max fd = dddd/;
-  s/status=0 RDONLY/STATUS/g;
-  s/status=1 WRONLY/STATUS/g;
-  s/status=2 RDWR/STATUS/g;
+  s/status=[0-9a-f]+ (?:RDONLY|WRONLY|RDWR)/STATUS/g;
 
 
   # ======== Contents of spool files ========
@@ -1026,6 +1029,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # TLS resumption is not always supported by the build
     next if /^tls_resumption_hosts =/;
     next if /^-tls_resumption/;
+
+    # gsasl library version may not support some methods
+    s/250-AUTH ANONYMOUS PLAIN SCRAM-SHA-1\K SCRAM-SHA-256//;
     }
 
   # ======== stderr ========
@@ -1040,6 +1046,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
     s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
+    s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
@@ -1057,6 +1064,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/;
     next if /OpenSSL runtime version: OpenSSL \d+[\.\da-z]+/;
 
+    # this is timing-dependent
+    next if /^OpenSSL: creating STEK$/;
+
     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;
@@ -1191,16 +1201,27 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Platform-dependent error strings
     s/Operation timed out/Connection timed out/;
 
+    # Platform differences on disconnect
+    s/unexpected disconnection while reading SMTP command from \[127.0.0.1\] \K\(error: Connection reset by peer\) //;
+
     # Platform-dependent resolver option bits
     s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
 
     # timing variance, run-to-run
     s/^time on queue = \K1s/0s/;
 
+    # content-scan: file order can vary in directory
+    s%unspool_mbox\(\): unlinking 'TESTSUITE/spool/scan/[^/]*/\K[^\']*%FFFFFFFFF%;
+
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
+    # daemon notifier socket
+    s/^(creating notifier socket) .*$/$1/;
+    s/^(\s*\d+|ppppp) (creating notifier socket) .+$/ppppp $2/;
+    next if /unlinking notifier socket/;
+
     # DISABLE_OCSP
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 
@@ -1254,11 +1275,12 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
 
     # Not all platforms support TCP Fast Open, and the compile omits the check
-    if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|yes \(matched "\*"\))\n$//)
+    if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)
       {
+      chomp;
       $_ .= <IN>;
       s/ \.\.\. >>> / ... /;
-      if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { $_ .= <IN>; }
+      if (s/ non-TFO mode connection attempt to 224.0.0.0, 0 data\b$//) { chomp; $_ .= <IN>; }
       s/Address family not supported by protocol family/Network Error/;
       s/Network is unreachable/Network Error/;
       }
@@ -1310,6 +1332,13 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Platform differences in errno strings
     s/  SMTP\(Operation timed out\)<</  SMTP(Connection timed out)<</;
 
+    # Platform differences for errno values (eg. Hurd)
+    s/^errno = \d+$/errno = EEE/;
+    s/^writing error \d+: /writing error EEE: /;
+
+    # Some platforms have to flip to slow-mode taint-checking
+    next if /switching to slow-mode taint checking/;
+
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to
@@ -1404,6 +1433,11 @@ RESET_AFTER_EXTRA_LINE_READ:
     s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
     s/I=\[[^\]]*\]:\K\d+/ppppp/;
 
+    # Platform differences for errno values (eg. Hurd).  Leave 0 and negative numbers alone.
+    s/R=\w+ T=\w+ defer\K \([1-9]\d*\): / (EEE): /;
+
+    # Platform differences in errno strings
+    s/Arg list too long/Argument list too long/;
     }
 
   # ======== mail ========
@@ -1545,7 +1579,7 @@ if (! -e $sf_current)
       log_failure($log_failed_filename, $testno, $rf);
       log_test($log_summary_filename, $testno, 'F') if ($force_continue);
     }
-    return 1 if /^c$/i && $rf !~ /paniclog/ && $rsf !~ /paniclog/;
+    return 1 if /^c$/i && $rf !~ /paniclog/ && (!defined $rsf || $rsf !~ /paniclog/);
     last if (/^[sc]$/);
     }
 
@@ -1811,7 +1845,7 @@ $munges =
     },
 
     'timeout_errno' =>		# actual errno differs Solaris vs. Linux
-    { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
+    { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 <EEE> /' },
 
     'peer_terminated_conn' =>	# actual error differs FreedBSD vs. Linux
     { 'stderr' => 's/^(  SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
@@ -2304,8 +2338,7 @@ if (/^gnutls/)
 
 
 # The "killdaemon" command should ultimately follow the starting of any Exim
-# daemon with the -bd option. We kill with SIGINT rather than SIGTERM to stop
-# it outputting "Terminated" to the terminal when not in the background.
+# daemon with the -bd option.
 
 if (/^killdaemon/)
   {
@@ -2317,14 +2350,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");
       close DAEMONCMD;                                   # Waits for process
       }
     }
@@ -3449,7 +3482,7 @@ while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
   {
   if (/^(?:[0-9]+: )?([a-z0-9]+): /) { $ifname = $1; }
 
-  if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
+  if (not $parm_ipv4 and /^\s*inet(?:\saddr(?:ess))?:?\s*(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
     {
     # It would be nice to be able to vary the /16 used for manyhome; we could take
     # an option to runtest used here - but we'd also have to pass it on to fakens.
@@ -3458,7 +3491,8 @@ while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
     $parm_ipv4 = $1;
     }
 
-  if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
+  if (   (not $parm_ipv6 or $parm_ipv6 =~ /%/)
+     and /^\s*inet6(?:\saddr(?:ess))?:?\s*([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
     {
     next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i or $1 =~ /^fe80::1/i;
     $parm_ipv6 = $1;
@@ -3827,6 +3861,10 @@ DIR: for (my $i = 0; $i < @test_dirs; $i++)
 	}
 	unlink("$parm_cwd/test-config");
         }
+      elsif (/^ipv6-non-linklocal/)
+	{
+	if ($parm_ipv6 =~ /%/) { $wantthis = 0; last; }
+	}
       else
         {
         tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");