X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/c1114884ce069db8d691e217cc79b2e5ff242df8..93cfa7655fe8233dbf5d945a5bc1ca1c3a607510:/doc/doc-txt/ChangeLog

diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog
index 57f603b7b..3e9b5a8a0 100644
--- a/doc/doc-txt/ChangeLog
+++ b/doc/doc-txt/ChangeLog
@@ -1,10 +1,19 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.420 2006/10/31 11:14:17 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.448 2006/12/20 19:57:47 tom Exp $
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
+Exim version 4.65
+-----------------
+
+TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
+      Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
+      versions. (#438)
+
+
 Exim version 4.64
 -----------------
+
 TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
       leftover -K file (the existence of which was triggered by #402).
       While we were at it, introduced process PID as part of the -K
@@ -220,6 +229,144 @@ PH/30 Exim was sometimes attempting to deliver messages that had suffered
 PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
       in ${readsocket because some servers need this prod.
 
+PH/32 Added some extra debug output when updating a wait-xxx database.
+
+PH/33 The hint "could be header name not terminated by colon", which has been
+      given for certain expansion errors for a long time, was not being given
+      for the ${if def:h_colon_omitted{...  case.
+
+PH/34 The spec says: "With one important exception, whenever a domain list is
+      being scanned, $domain contains the subject domain." There was at least
+      one case where this was not true.
+
+PH/35 The error "getsockname() failed: connection reset by peer" was being
+      written to the panic log as well as the main log, but it isn't really
+      panic-worthy as it just means the connection died rather early on. I have
+      removed the panic log writing for the ECONNRESET error when getsockname()
+      fails.
+
+PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
+      runs only) independently of the message's sender address. This meant
+      that, if the 4xx error was in fact related to the sender, a different
+      message to the same recipient with a different sender could confuse
+      things. In particualar, this can happen when sending to a greylisting
+      server, but other circumstances could also provoke similar problems.
+      I have changed the default so that the retry time for these errors is now
+      based a combination of the sender and recipient addresses. This change
+      can be overridden by setting address_retry_include_sender=false in the
+      smtp transport.
+
+PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
+      remote server are returned as part of bounce messages. This was not
+      happening for LMTP over a pipe (the lmtp transport), but now it is the
+      same for both kinds of LMTP.
+
+PH/38 Despite being documented as not happening, Exim was rewriting addresses
+      in header lines that were in fact CNAMEs. This is no longer the case.
+
+PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
+      and queue runs started by the daemon processed all messages. This has
+      been fixed so that -R and -S can now usefully be given with -q<time>.
+
+PH/40 Import PCRE release 6.7 (fixes some bugs).
+
+PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
+
+PH/42 Give an error if -q is specified more than once.
+
+PH/43 Renamed the variables $interface_address and $interface_port as
+      $received_ip_address and $received_port, to make it clear that these
+      values apply to message reception, and not to the outgoing interface when
+      a message is delivered. (The old names remain recognized, of course.)
+
+PH/44 There was no timeout on the connect() call when using a Unix domain
+      socket in the ${readsocket expansion. There now is.
+
+PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
+      be meaningful with "accept".
+
+SC/01 Eximstats V1.43
+     Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
+
+SC/02 Eximstats V1.44
+      Use a glob alias rather than an array ref in the generated
+      parser. This improves both readability and performance.
+
+SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
+      Collect SpamAssassin and rejection statistics.
+      Don't display local sender or destination tables unless
+      there is data to show.
+      Added average volumes into the top table text output.
+
+SC/04 Eximstats V1.46
+      Collect data on the number of addresses (recipients)
+      as well as the number of messages.
+
+SC/05 Eximstats V1.47
+      Added 'Message too big' to the list of mail rejection
+      reasons (thanks to Marco Gaiarin).
+
+SC/06 Eximstats V1.48
+      Mainlog lines which have GMT offsets and are too short to
+      have a flag are now skipped.
+
+SC/07 Eximstats V1.49 (Alain Williams)
+      Added the -emptyok flag.
+
+SC/08 Eximstats V1.50
+      Fixes for obtaining the IP address from reject messages.
+
+JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
+      (added [br]h_ prefixes, implemented RFC2047 decoding.  Fixed
+      whitesspace changes from 4.64-PH/27
+
+JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
+      match 4.64-PH/13
+
+JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
+      are found, allow negative numbers in numeric criteria)
+
+JJ/06 exipick.20061117.2, added new $message_body_missing variable
+
+JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
+      to match changes made in 4.64-PH/43
+
+PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
+
+PH/47 Put in an explicit test for a DNS lookup of an address record where the
+      "domain" is actually an IP address, and force a failure. This locks out
+      those revolvers/nameservers that support "A-for-A" lookups, in
+      contravention of the specifications.
+
+PH/48 When a host name was looked up from an IP address, and the subsequent
+      forward lookup of the name timed out, the host name was left in
+      $sender_host_name, contrary to the specification.
+
+PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
+      restricted to single-key lookups, Exim was not diagnosing an error if
+      * or *@ was used with a query-style lookup.
+
+PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
+
+MH/01 local_scan ABI version incremented to 1.1. It should have been updated
+      long ago, but noone interested enough thought of it. Let's just say that
+      the "1.1" means that there are some new functions that weren't there at
+      some point in the past.
+
+PH/51 Error processing for expansion failure of helo_data from an smtp
+      transport during callout processing was broken.
+
+PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
+      tested/used via the -bh/-bhc/-bs options.
+
+PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
+      bug, fixed in subsequent PCRE releases).
+
+PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
+      arises when using the Solaris LDAP libraries (but not with OpenLDAP).
+
+PH/55 Check for a ridiculously long file name in exim_dbmbuild.
+
 
 Exim version 4.63
 -----------------