X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/bdff9439baec7646a48684b8ddc0d50dd8fbffb3..ce3258931d05becb2c87f17d80ee7c4b01f5a55a:/doc/doc-txt/OptionLists.txt
diff --git a/doc/doc-txt/OptionLists.txt b/doc/doc-txt/OptionLists.txt
index e72ebe40c..375850d6b 100644
--- a/doc/doc-txt/OptionLists.txt
+++ b/doc/doc-txt/OptionLists.txt
@@ -1,5 +1,3 @@
-$Cambridge: exim/doc/doc-txt/OptionLists.txt,v 1.38 2010/06/12 15:21:25 jetmore Exp $
-
LISTS OF EXIM OPTIONS
---------------------
@@ -50,12 +48,14 @@ release 4.00, and so no router options are shown as earlier than 4.00, though
in fact some of them were inherited from earlier versions.
-----------------------------------------------------------------------------------------
-accept_8bitmime boolean false main 1.60
+accept_8bitmime boolean true main 1.60 changed to true in 4.80
acl_not_smtp string* unset main 4.11
acl_not_smtp_mime string* unset main 4.51 with content scan
acl_smtp_auth string* unset main 4.00
acl_smtp_connect string* unset main 4.11
acl_smtp_data string* unset main 4.00
+acl_smtp_data_prdr string* unset main 4.82 with expreimental_prdr
+acl_smtp_dkim string* unset main 4.70 unless disable_dkim
acl_smtp_etrn string* unset main 4.00
acl_smtp_expn string* unset main 4.00
acl_smtp_helo string* unset main 4.20
@@ -173,10 +173,15 @@ directory_transport string* unset redirect
disable_ipv6 boolean false main 4.61
disable_logging boolean false routers 4.11
false transports 4.11
+dmarc_forensic_sender string unset main 4.82 if experimental_dmarc
+dmarc_history_file string unset main 4.82 if experimental_dmarc
+dmarc_tld_file string unset main 4.82 if experimental_dmarc
dns_again_means_nonexist domain list unset main 1.89
dns_check_names_pattern string + main 2.11
dns_csa_search_limit integer 5 main 4.60
dns_csa_use_reverse boolean true main 4.60
+dns_dnssec_ok integer -1 main 4.82
+dns_dane_ok integer -1 main 4.83
dns_ipv4_lookup boolean false main 3.20
dns_qualify_single boolean true smtp
dns_retrans time 0s main 1.60
@@ -188,6 +193,7 @@ driver string unset authenticator
unset routers 4.00
unset transports
drop_cr boolean false main 4.00 became a no-op in 4.21
+dscp string unset smtp 4.82
dsn_from string* + main 4.67
envelope_to_add boolean false transports
envelope_to_remove boolean true main
@@ -235,6 +241,7 @@ forbid_include boolean false redirect
forbid_pipe boolean false redirect 4.00
forbid_sieve_filter boolean false redirect 4.44
forbid_smtp_code boolean false redirect 4.63
+force_command boolean false pipe 4.82
freeze_exec_fail boolean false pipe 1.89
freeze_signal boolean false pipe 4.75
freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
@@ -242,13 +249,14 @@ from string* unset autoreply
gecos_name string* unset main
gecos_pattern string unset main
gethostbyname boolean false smtp
+gnutls_allow_auto_pkcs11 boolean false main 4.82
gnutls_compat_mode boolean unset main 4.70
-gnutls_require_kx string* unset main 4.67
- string* unset smtp 4.67
-gnutls_require_mac string* unset main 4.67
- string* unset smtp 4.67
-gnutls_require_protocols string* unset main 4.67
- string* unset smtp 4.67
+gnutls_require_kx string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
+gnutls_require_mac string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
+gnutls_require_protocols string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
group string + routers 4.00
unset transports 4.00 replaces local option in some transports
header_line_maxsize integer 0 (unset) main 4.14
@@ -288,9 +296,11 @@ hosts_override boolean false smtp
hosts_randomize boolean false manualroute 4.00
false smtp 3.14
hosts_require_auth host list unset smtp 4.00
+hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
hosts_require_tls host list unset smtp 3.20
hosts_treat_as_local domain list unset main 1.95
hosts_try_auth host list unset smtp 4.00
+hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
ibase_servers string unset main 4.23
ignore_bounce_errors_after time 0s main 4.00
ignore_eacces boolean false redirect 4.00
@@ -338,7 +348,7 @@ mailbox_size string* unset appendfile
maildir_format boolean false appendfile 1.70
maildir_retries integer 10 appendfile 1.70
maildir_tag string* unset appendfile 1.92
-maildir_use_size_file boolean false appendfile 4.30
+maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
maildirfolder_create_regex string unset appendfile 4.62
mailstore_format boolean false appendfile 2.00
mailstore_prefix string* unset appendfile 2.00
@@ -375,7 +385,7 @@ once string* unset autoreply
once_file_size integer 0 autoreply 3.20
once_repeat time 0s autoreply 2.95
one_time boolean false redirect 4.00
-openssl_options string "+dont_insert_empty_fragments" main 4.73
+openssl_options string +no_sslv2 main 4.73 default changed in 4.80
optional boolean false iplookup 4.00
oracle_servers string unset main 4.00
owners string list unset redirect 4.00
@@ -395,6 +405,7 @@ pipelining_advertise_hosts host list "*" main
port integer 0 iplookup 4.00
string "smtp" smtp
preserve_message_logs boolean false main
+prdr_enable boolean false main 4.82 if experimental_prdr
primary_hostname string + main
print_topbitchars boolean false main 1.89
process_log_path string unset main 4.21
@@ -468,14 +479,19 @@ sender_unqualified_hosts host list unset main
senders address list unset routers 4.00
serialize_hosts host list unset smtp 1.60
server_advertise_condition string* unset authenticators 4.14
+server_channelbinding bool false gsasl 4.80
server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
-server_hostname string* "$primary_hostname" cyrus_sasl 4.43
+server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
+server_keytab string* unset heimdal_gssapi 4.80
server_mail_auth_condition string* unset authenticators 3.22
-server_mech string public_name cyrus_sasl 4.43
+server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
+server_password string unset gsasl 4.80
server_prompts string* unset plaintext 3.10
-server_realm string unset cyrus_sasl 4.43
+server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
+server_scram_iter string* unset gsasl 4.80
+server_scram_salt string* unset gsasl 4.80
server_secret string* unset cram_md5 3.10
-server_service string "smtp" cyrus_sasl 4.43
+server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
server_set_id string* unset authenticators 3.10
shadow_condition string* unset transports
shadow_transport string unset transports
@@ -544,13 +560,17 @@ timezone string + main
tls_advertise_hosts host list * main 3.20
tls_certificate string* unset main 3.20
unset smtp 3.20
+tls_dh_max_bits integer 2236 main 4.80
+tls_dh_min_bits integer 1024 smtp 4.82
tls_dhparam string* unset main 3.20
+tls_ocsp_file string* unset main 4.80 if experimental_ocsp
tls_on_connect_ports string unset main 4.43
tls_privatekey string* unset main 3.20
unset smtp 3.20
tls_remember_emstp boolean false main 4.21
tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
string* unset main 4.33
+tls_sni string* unset main 4.80
tls_tempfail_tryclear boolean true smtp 4.05
tls_try_verify_hosts host list unset main 4.00
tls_verify_certificates string* unset main 3.20
@@ -618,6 +638,7 @@ provide compatibility with Sendmail.
-bh Test incoming SMTP call, omitting callouts
-bhc Test incoming SMTP call, with callouts
-bi * Run bi_command
+-bI:help Show list of accepted -bI: options
-bm Accept message on standard input
-bmalware + Invoke configured malware scanning against supplied filename
-bnq Don't qualify addresses in locally submitted messages
@@ -637,6 +658,7 @@ provide compatibility with Sendmail.
-bV Verify version number
-bv Test recipient address verification
-bvs Test sender address verification
+-bw + Inetd wait mode
-C + Use alternate configuration file
-D + Define macro for configuration file
-d + Turn on debugging output
@@ -693,6 +715,7 @@ provide compatibility with Sendmail.
-oMai # Supply authenticated id
-oMas # Supply authenticated sender
-oMi # Supply interface address
+-oMm # Supply message reference
-oMr # Supply protocol name
-oMs # Supply host name
-oMt # Supply ident string
@@ -739,9 +762,12 @@ provide compatibility with Sendmail.
3. BUILD TIME OPTIONS FOR EXIM
------------------------------
-The table below contains a complete list of options that can be set in
-Local/Makefile when building Exim. More information about individual options
-can be found in src/EDITME and OS/Makefile-Default.
+The table below contains a "mostly" complete list of options that can be
+set in Local/Makefile when building Exim. The only items not included are
+those whose names can be trivially derived from rules stated below.
+
+More information about individual options can be found in src/EDITME and
+OS/Makefile-Default.
The second column below gives the type of option:
@@ -771,6 +797,23 @@ empty by default, and is provided for just this reason. Of course, if you do
actually want to modify a setting from the OS-specific file, there is nothing
to stop you overriding it in your Local/Makefile.
+When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
+you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
+libraries specific only to that module. These rules are only used where the
+relevant lookup is a module. These options are not explicitly listed below.
+
+Variables with names endined `_PC' are used for pkg-config integration; setting
+the value to the name of a pkg-config package will cause Exim's build system to
+query the --cflags and --libs for the given name, when building anything
+dependent upon the component associated with the `_PC' variable. For lookups,
+if the lookup is dynamically loaded, then this *replaces* the use of the
+corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
+is statically loaded into Exim, the results will be inserted into the
+"LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
+will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
+only listed below for the TLS implementation cases.
+
+
Option Type Description
------------------------------------------------------------------------------
@@ -781,6 +824,9 @@ APPENDFILE_LOCKFILE_MODE optional*
AR system command to build a library
AUTH_CRAM_MD5 driver include cram_md5 authenticator
AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
+AUTH_GSASL driver include GNU SASL authenticator
+AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
+AUTH_LIBS system library linkage for authenticators
AUTH_PLAINTEXT driver include plaintext authenticator
AUTH_SPA driver include SPA (NTLM) authenticator
AUTH_VARS=3 optional* number of $auth variables
@@ -809,6 +855,7 @@ DEFAULT_CRYPT optional default crypt() function
DELIVER_IN_BUFFER_SIZE optional*
DELIVER_OUT_BUFFER_SIZE optional*
DISABLE_DKIM optional disables DKIM support
+DISABLE_DNSSEC optional disables attempts to use DNSSEC
DISABLE_D_OPTION optional disables -D option
ERRNO_QUOTA optional* error code for system quota failures
EXICYCLOG_MAX optional number of old log files to keep
@@ -827,6 +874,7 @@ EXIWHAT_MULTIKILL_CMD system**
EXIWHAT_MULTIKILL_ARG system**
EXIWHAT_PS_ARG system** to list all processes
EXIWHAT_PS_CMD system** path to ps command
+EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
EXTRALIBS system additional libraries
EXTRALIBS_EXIM system additional libraries for Exim only
EXTRALIBS_EXIMON system additional libraries for the monitor
@@ -881,7 +929,8 @@ MAX_INTERFACES system maximum network interfaces
MSGLOG_DIRECTORY_MODE optional* mode for message log directory
MV_COMMAND system path to mv command
NO_SYMLINK optional install doesn't make 'exim" symlink
-PCRE_CFLAGS system compile flags for PCRE library
+PCRE_CONFIG system* use pcre-config for PCRE support
+PCRE_LIBS system* library for using PCRE
PERL_CC system* compiler for Perl interface code
PERL_CCOPTS system* flags for same
PERL_COMMAND system path to Perl
@@ -928,6 +977,8 @@ TRANSPORT_SMTP driver include smtp transport
TRUSTED_CONFIG_LIST optional config files safe to retain privileges
USE_DB system** use native DB interface
USE_GNUTLS optional use GnuTLS instead of OpenSSL
+USE_GNUTLS_PC optional probably "gnutls"
+USE_OPENSSL_PC optional probably "openssl"
USE_READLINE optional try to load libreadline for -be
USE_TCP_WRAPPERS system link with tcpwrappers
USE_TDB optional use the tdb DB interface