X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/bbe902f07b0bd4a78901962c9f679e2ef2d013c5..f625cc5a367a82d2003c1fe524b900289907035c:/doc/doc-txt/ChangeLog?ds=sidebyside diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index a5ae2700e..fd48cfb1c 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,602 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.72 2005/01/14 11:06:58 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.200 2005/08/08 10:29:08 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.53 +----------------- + +TK/01 Added the "success_on_redirect" address verification option. See + NewStuff for rationale and an example. + +PH/01 Added support for SQLite, basic code supplied by David Woodhouse. + +PH/02 Patch to exigrep to allow it to work on syslog lines. + +PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of + fread() to skip over the body file's header line, because in Cygwin the + header line is locked and is inaccessible. + +PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both + co-exist for some time) to make it clear that it is the Exim ID that is + referenced, not the Message-ID: header line. + +PH/05 Replaced all Tom's calls to snprintf() with calls to the internal + string_format() function, because snprintf() does not exist on all + operating systems. + +PH/06 The use of forbid_filter_existstest now also locks out the use of the + ${stat: expansion item. + +PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP + protocol synchronization error", to keep the pedants happy. + +PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as + well as for IRIX systems, when gcc is being used. See the host.c source + file for comments. + +PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer. + +PH/10 Named domain lists were not working if used in a queue_smtp_domains + setting. + +PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp + transport and to the smtp transport in LMTP mode. + +TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway). + +PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to + run a filter in a subprocess. This could lead to confusion in subsequent + lookups in the parent process. There should also be a search_tidyup() at + the end of the subprocess. + +PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true + only if the host matched helo_try_verify_hosts, which caused the + verification to occur when the EHLO/HELO command was issued. The ACL just + tested the remembered result. Now, if a previous verification attempt has + not happened, "verify = helo" does it there and then. + +JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04) + +TK/03 Fix log output including CR from clamd. + +PH/14 A reference to $reply_address when Reply-to: was empty and From: did not + exist provoked a memory error which could cause a segfault. + +PH/15 Installed PCRE 6.2 + +PH/17 Defined BIND_8_COMPAT in the Darwin os.h file. + + +Exim version 4.52 +----------------- + +TF/01 Added support for Client SMTP Authorization. See NewStuff for details. + +PH/01 When a transport filter timed out in a pipe delivery, and the pipe + command itself ended in error, the underlying message about the transport + filter timeout was being overwritten with the pipe command error. Now the + underlying error message should be appended to the second error message. + +TK/01 Fix poll() being unavailable on Mac OSX 10.2. + +PH/02 Reduce the amount of output that "make" produces by default. Full output + can still be requested. + +PH/03 The warning log line about a condition test deferring for a "warn" verb + was being output only once per connection, rather than after each + occurrence (because it was using the same function as for successful + "warn" verbs). This seems wrong, so I have changed it. + +TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that + it should not have, which might have caused a crash in the right + circumstances, but probably never did. + +PH/04 Installed a modified version of Tony Finch's patch to make submission + mode fix the return path as well as the Sender: header line, and to + add a /name= option so that you can make the user's friendly name appear + in the header line. + +TF/03 Added the control = fakedefer ACL modifier. + +TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to + Mark Lowes for thorough testing. + +TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0. + +TK/03 Merged latest SRS patch from Miles Wilton. + +PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts + with the definition in sysexits.h (which is #included earlier). + Fortunately, Exim does not actually use EX_OK. The code used to try to + preserve the sysexits.h value, by assumimg that macro definitions were + scanned for macro replacements. I have been disabused of this notion, + so now the code just undefines EX_OK before #including unistd.h. + +PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout + in the smtp transport. When a block could not be written in a single + write() function, the timeout was being re-applied to each part-write. + This seems wrong - if the receiver was accepting one byte at a time it + would take for ever. The timeout is now adjusted when this happens. It + doesn't have to be particularly precise. + +TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for + details. Thanks to Chris Webb for the patch! + +PH/07 Added "fullpostmaster" verify option, which does a check to + without a domain if the check to fails. + +SC/01 Eximstats: added -xls and the ability to specify output files + (patch written by Frank Heydlauf). + +SC/02 Eximstats: use FileHandles for outputing results. + +SC/03 Eximstats: allow any combination of xls, txt, and html output. + +SC/04 Eximstats: fixed display of large numbers with -nvr option + +SC/05 Eximstats: fixed merging of reports with empty tables. + +SC/06 Eximstats: added the -include_original_destination flag + +SC/07 Eximstats: removed tabs and trailing whitespace. + +TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller. + +TK/06 MBOX spool code: Add real "From " MBOX separator line + so the .eml file is really in mbox format (even though + most programs do not really care). Patch from Alex Miller. + +TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers. + The latter is generated from $received_to and is only set if the + message has one envelope recipient. SA can use these headers, + obviously out-of-the-box. Patch from Alex Miller. + +PH/08 The ${def test on a variable was returning false if the variable's + value was "0", contrary to what the specification has always said! + The result should be true unless the variable is empty. + +PH/09 The syntax error of a character other than { following "${if + def:variable_name" (after optional whitespace) was not being diagnosed. + An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an + accidental colon was present, for example, could give incorrect results. + +PH/10 Tidied the code in a number of places where the st_size field of a stat() + result is used (not including appendfile, where other changes are about + to be made). + +PH/11 Upgraded appendfile so that quotas larger than 2G are now supported. + This involved changing a lot of size variables from int to off_t. It + should work with maildirs and everything. + +TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of + spamd dying while we are connected to it. + +TF/05 Fixed a ${extract error message typo reported by Jeremy Harris + + +PH/12 Applied Alex Kiernan's patch for the API change for the error callback + function for BDB 4.3. + +PH/13 Changed auto_thaw such that it does not apply to bounce messages. + +PH/14 Imported PCRE 6.0; this was more than just a trivial operation because + the sources for PCRE have been re-arranged and more files are now + involved. + +PH/15 The code I had for printing potentially long long variables in PH/11 + above was not the best (it lost precision). The length of off_t variables + is now inspected at build time, and an appropriate printing format (%ld + or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T + to be "long long int" or "long int". This is needed for the internal + formatting function string_vformat(). + +PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in + the configuration file to be ":syslog", then the script "guesses" where + the logs files are, rather than using the compiled in default. In our + case the guess is not the same as the compiled default, so the script + suddenly stopped working when I started to use syslog. The patch checks + to see if log_file_path is "". If so, it attempts to read it from exim + with no configuration file to get the compiled in version, before it + falls back to the previous guessing code." + +TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with + implementing BATV in an Exim configuration. See NewStuff for the gory + details. + +PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and + Makefile that are specific to HP-UX. + +PH/18 If the "use_postmaster" option was set for a recipient callout together + with the "random" option, the postmaster address was used as the MAIL + FROM address for the random test, but not for the subsequent recipient + test. It is now used for both. + +PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The + patch removes a few documentation additions to RFC 3028, because the + latest draft now contains them. It adds the new en;ascii-case comparator + and a new error check for 8bit text in MIME parts. Comparator and + require names are now matched exactly. I enabled the subaddress + extension, but it is not well tested yet (read: it works for me)." + +PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to + rework some of the code of TK/09 above to avoid the hardwired use of + "%lld" and "long long". Replaced the call to snprintf() with a call to + string_vformat(). + +PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX + records point to non-existent hosts", "retry timeout exceeded", and + "retry time not reached for any host after a long failure period". + +PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with + experimental DomainKeys support: + + (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken. + (2) On an error such as an illegally used "control", the wrong name for + the control was given. + + These problems did NOT occur unless DomainKeys support was compiled. + +PH/23 Added daemon_startup_retries and daemon_startup_sleep. + +PH/24 Added ${if match_ip condition. + +PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints + databases so that it will be absolutely obvious if a crash occurs in the + DB library. This is a regular occurrence (often caused by mis-matched + db.h files). + +PH/26 Insert a lot of missing (void) casts for functions such as chown(), + chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were + picked up on a user's system that detects such things. There doesn't seem + to be a gcc warning option for this - only an attribute that has to be + put on the function's prototype. It seems that in Fedora Core 4 they have + set this on a number of new functions. No doubt there will be more in due + course. + +PH/27 If a dnslookup or manualroute router is set with verify=only, it need not + specify a transport. However, if an address that was verified by such a + router was the subject of a callout, Exim crashed because it tried to + read the rcpt_include_affixes from the non-existent transport. Now it + just assumes that the setting of that option is false. This bug was + introduced by 4.51/PH/31. + +PH/28 Changed -d+all to exclude +memory, because that information is very + rarely of interest, but it makes the output a lot bigger. People tend to + do -d+all out of habit. + +PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the + code in os-type was giving problems when libc.so lives in lib64, like on + x86_64 Fedora Core. + +PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These + aren't the modern standard, and it seems that some systems' include files + don't always have them. Exim was already checking for some of the newer + ones like T_AAAA, and defining it itself. I've added checks for all the + record types that Exim uses. + +PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was + not automatically generating a new one, as it is supposed to. This + prevented TLS from working. If the file did exist, but contained invalid + data, a new version was generated, as expected. It was only the case of a + non-existent file that was broken. + +TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction + with a change in libdomainkeys > 0.64. + +TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved + from DNS. If the selector record carries the flag, it now has + precedence over the domain-wide flag. + +TK/12 Cleared some compiler warnings related to SPF, SRS and DK code. + +PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as + the use of a port name that isn't defined in /etc/services) occurred, the + message was deferred as in a normal delivery, and thus remained on the + spool, instead of being failed because of the mua_wrapper setting. This + is now fixed, and I tidied up some of the mua_wrapper messages at the + same time. + +SC/08 Eximstats: whilst parsing the mainlog(s), store information about + the messages in a hash of arrays rather than using individual hashes. + This is a bit cleaner and results in dramatic memory savings, albeit + at a slight CPU cost. + +SC/09 Eximstats: added the -show_rt and the -show_dt flags + as requested by Marc Sherman. + +SC/10 Eximstats: added histograms for user specified patterns as requested + by Marc Sherman. + +SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified. + +PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of + fopen() in the content-scanning modules that did not already have it. + + +Exim version 4.51 +----------------- + +TK/01 Added Yahoo DomainKeys support via libdomainkeys. See + doc/experimental-spec.txt for details. (http://domainkeys.sf.net) + +TK/02 Fix ACL "control" statement not being available in MIME ACL. + +TK/03 Fix ACL "regex" condition not being available in MIME ACL. + +PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used + to test Sieve filters that use "vacation". + +PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch + that changes the way the GnuTLS parameters are stored in the cache file. + The new format can be generated externally. For backward compatibility, + if the data in the cache doesn't make sense, Exim assumes it has read an + old-format file, and it generates new data and writes a new file. This + means that you can't go back to an older release without removing the + file. + +PH/03 A redirect router that has both "unseen" and "one_time" set does not + work if there are any delivery delays because "one_time" forces the + parent to be marked "delivered", so its unseen clone is never tried + again. For this reason, Exim now forbids the simultaneous setting of + these two options. + +PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are + redirected to themselves ("homonym" addresses). Read the long ChangeLog + entry if you want to know the details. The fix, however, neglected to + consider the case when local delivery batching is involved. The test for + "previously delivered" was not happening when checking to see if an + address could be batched with a previous (undelivered) one; under + certain circumstances this could lead to multiple deliveries to the same + address. + +PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T + in its include files, and this causes problems building Exim. + +PH/06 A number of "verify =" ACL conditions have no options (e.g. verify = + header_syntax) but Exim was just ignoring anything given after a slash. + In particular, this caused confusion with an attempt to use "verify = + reverse_host_lookup/defer_ok". An error is now given when options are + supplied for verify items that do not have them. (Maybe reverse_host_ + lookup should have a defer_ok option, but that's a different point.) + +PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as + defined by RFC 821) to 2048, because there were problems with some AUTH + commands, and RFC 1869 says the size should be increased for extended + SMTP commands that take arguments. + +PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony + Finch). + +PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an + "unknown" error; now it says that the functionality isn't in the binary. + +PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in + an address' error message when a string expansion fails (syntax or + whatever). Otherwise the password may appear in the log. Following change + PH/42 below, there is no longer a chance of it appearing in a bounce + message. + +PH/11 Installed exipick version 20050225.0 from John Jetmore. + +PH/12 If the last host in a fallback_hosts list was multihomed, only the first + of its addresses was ever tried. (Bugzilla bug #2.) + +PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed + the result incorrectly in the debug output. (It correctly added a newline + to what was transported.) + +TF/01 Added $received_time. + +PH/14 Modified the default configuration to add an acl_smtp_data ACL, with + commented out examples of how to interface to a virus scanner and to + SpamAssassin. Also added commented examples of av_scanner and + spamd_address settings. + +PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions + and controls are allowed in which ACLs. There were a couple of minor + errors. Some of the entries in the conditions table (which is a table of + where they are NOT allowed) were getting very unwieldy; rewrote them as a + negation of where the condition IS allowed. + +PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer. + +PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the + header file does not have a version number, so I've had to invent a new + value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new + API. The code is untested by me (my Linux distribution still has 0.3.2 of + radiusclient), but it was contributed by a Radius user. + +PH/18 Installed Lars Mainka's patch for the support of CRL collections in + files or directories, for OpenSSL. + +PH/19 When an Exim process that is running as root has to create an Exim log + file, it does so in a subprocess that runs as exim:exim so as to get the + ownership right at creation (otherwise, other Exim processes might see + the file with the wrong ownership). There was no test for failure of this + fork() call, which would lead to the process getting stuck as it waited + for a non-existent subprocess. Forks do occasionally fail when resources + run out. I reviewed all the other calls to fork(); they all seem to check + for failure. + +PH/20 When checking for unexpected SMTP input at connect time (before writing + the banner), Exim was not dealing correctly with a non-positive return + from the read() function. If the client had disconnected by this time, + the result was a log entry for a synchronization error with an empty + string after "input=" when read() returned zero. If read() returned -1 + (an event I could not check), uninitialized data bytes were printed. + There were reports of junk text (parts of files, etc) appearing after + "input=". + +PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages. + +PH/22 Added support for macro redefinition, and (re)definition in between + driver and ACL definitions. + +PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then + forgetting to use the resulting value; it was using the unexpanded value. + +PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it + hadn't been configured. The fix is from Juergen Kreileder, who + understands it better than I do: + + "Here's what I see happening with three configured cyrus_sasl + authenticators configured (plain, login, cram-md5): + + On startup auth_cyrus_sasl_init() gets called for each of these. + This means three calls to sasl_listmech() without a specified mech_list. + => SASL tests which mechs of all available mechs actually work + => three warnings about OTP not working + => the returned list contains: plain, login, cram-md5, digest-md5, ... + + With the patch, sasl_listmech() also gets called three times. But now + SASL's mech_list option is set to the server_mech specified in the the + authenticator. Or in other words, the answer from sasl_listmech() + gets limited to just the mech you're testing for (which is different + for each call.) + => the return list contains just 'plain' or 'login', 'cram-md5' or + nothing depending on the value of ob->server_mech. + + I've just tested the patch: Authentication still works fine, + unavailable mechs specified in the exim configuration are still + caught, and the auth.log warnings about OTP are gone." + +PH/25 When debugging is enabled, the contents of the command line are added + to the debugging output, even when log_selector=+arguments is not + specified. + +PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the + answer is "GNU", and only if the return is "GNU/something" is the answer + "Linux". + +PH/27 $acl_verify_message is now set immediately after the failure of a + verification in an ACL, and so is available in subsequent modifiers. In + particular, the message can be preserved by coding like this: + + warn !verify = sender + set acl_m0 = $acl_verify_message + + Previously, $acl_verify_message was set only while expanding "message" + and "log_message" when a very denied access. + +PH/28 Modified OS/os.c-Linux with + + -#ifndef OS_LOAD_AVERAGE + +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__) + + to make Exim compile on kfreebsd-gnu. (I'm totally confused about the + nomenclature these days.) + +PH/29 Installed patch from the Sieve maintainer that adds the options + sieve_useraddress and sieve_subaddress to the redirect router. + +PH/30 In these circumstances: + . Two addresses routed to the same list of hosts; + . First host does not offer TLS; + . First host accepts first address; + . First host gives temporary error to second address; + . Second host offers TLS and a TLS session is established; + . Second host accepts second address. + Exim incorrectly logged both deliveries with the TLS parameters (cipher + and peerdn, if requested) that were in fact used only for the second + address. + +PH/31 When doing a callout as part of verifying an address, Exim was not paying + attention to any local part prefix or suffix that was matched by the + router that accepted the address. It now behaves in the same way as it + does for delivery: the affixes are removed from the local part unless + rcpt_include_affixes is set on the transport. + +PH/32 Add the sender address, as F=<...>, to the log line when logging a + timeout during the DATA phase of an incoming message. + +PH/33 Sieve envelope tests were broken for match types other than :is. I have + applied a patch sanctioned by the Sieve maintainer. + +PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where + the uid or gid is negative. A case of a negative gid caused this to be + noticed. The fix allows for either to be negative. + +PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code + clutter, but the tables that are indexed by ACL_WHERE_xxx values had been + overlooked. + +PH/36 The change PH/12 above was broken. Fixed it. + +PH/37 Exim used to check for duplicate addresses in the middle of routing, on + the grounds that routing the same address twice would always produce the + same answer. This might have been true once, but it is certainly no + longer true now. Routing a child address may depend on the previous + routing that produced that child. Some complicated redirection strategies + went wrong when messages had multiple recipients, and made Exim's + behaviour dependent on the order in which the addresses were given. + + I have moved the duplicate checking until after the routing is complete. + Exim scans the addresses that are assigned to local and remote + transports, and removes any duplicates. This means that more work will be + done, as duplicates will always all be routed, but duplicates are + presumably rare, so I don't expect this is of any significance. + + For deliveries to pipes, files, and autoreplies, the duplicate checking + still happens during the routing process, since they are not going to be + routed further. + +PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner. + It corrects a timeout issue with spamd. This is Ian's comment: "The + background is that sometimes spamd either never reads data from a + connection it has accepted, or it never writes response data. The exiscan + spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it + blindly assumes that writes won't block so it may never time out." + +PH/39 Allow G after quota size as well as K and M. + +PH/40 The value set for $authenticated_id in an authenticator may not contain + binary zeroes or newlines because the value is written to log lines and + to spool files. There was no check on this. Now the value is run through + the string_printing() function so that such characters are converted to + printable escape sequences. + +PH/41 $message_linecount is a new variable that contains the total number of + lines in the message. Compare $body_linecount, which is the count for the + body only. + +PH/42 Exim no longer gives details of delivery errors for specific addresses in + bounce and delay warning messages, except in certain special cases, which + are as follows: + + (a) An SMTP error message from a remote host; + (b) A message specified in a :fail: redirection; + (c) A message specified in a "fail" command in a system filter; + (d) A message specified in a FAIL return from the queryprogram router; + (e) A message specified by the cannot_route_message router option. + + In these cases only, Exim does include the error details in bounce and + warning messages. There are also a few cases where bland messages such + as "unrouteable address" or "local delivery error" are given. + +PH/43 $value is now also set for the "else" part of a ${run expansion. + +PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still + being worked on, but at least Exim now implements the latest version to + play with." + +PH/45 In a pipe transport, although a timeout while waiting for the pipe + process to complete was treated as a delivery failure, a timeout while + writing the message to the pipe was logged, but erroneously treated as a + successful delivery. Such timeouts include transport filter timeouts. For + consistency with the overall process timeout, these timeouts are now + treated as errors, giving rise to delivery failures by default. However, + there is now a new Boolean option for the pipe transport called + timeout_defer, which, if set TRUE, converts the failures into defers for + both kinds of timeout. A transport filter timeout is now identified in + the log output. + +PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On + systems where "make" and "gmake" are different, calling "gmake" at top + level broke things. I've arranged for the value of $(MAKE) to be passed + from the Makefile to this script so that it can call the same version of + "make". + A note about Exim versions 4.44 and 4.50 ---------------------------------------- @@ -260,6 +854,7 @@ Exim version 4.50 keys for these records are domain names, not reversed IP addresses. The dnsdb PTR lookup now tests whether its key is an IP address. If not, it leaves it alone. Component reversal etc. now happens only for IP addresses. + CAN-2005-0021 56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP. @@ -289,10 +884,12 @@ Exim version 4.50 exim, but did not say which command line option was involved. All I could find was the use of -be with a bad dnsdb PTR lookup, and in that case it is running as the user. + CAN-2005-0021 61. There was a buffer overflow vulnerability in the SPA authentication code (which came originally from the Samba project). I have added a test to the spa_base64_to_bits() function which I hope fixes it. + CAN-2005-0022 62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD. @@ -340,6 +937,57 @@ Exim version 4.50 error if it is another Exim or anything else that does the synchronization check. A QUIT command is no longer sent after a timeout. +73. $host_lookup_deferred has been added, to make it easier to detect DEFERs + during host lookups. + +74. The defer_ok option of callout verification was not working if it was used + when verifying addresses in header lines, that is, for this case: + + verify = header_sender/callout=defer_ok + +75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that + those file descriptors could be used for SMTP connections. If anything + wrote to stderr (the example that came up was "warn" in embedded Perl), it + could be sent to the SMTP client, causing chaos. The daemon now opens + stdin, stdout, and stderr to /dev/null when it puts itself into the + background. + +76. Arrange for output from Perl's "warn" command to be written to Exim's main + log by default. The user can override this with suitable Perl magic. + +77. The use of log_message on a "discard" ACL verb, which is supposed to add to + the log message when discard triggers, was not working for the DATA ACL or + for the non-SMTP ACL. + +78. Error message wording change in sieve.c. + +79. If smtp_accept_max_per_host was set, the number of connections could be + restricted to fewer than expected, because the daemon was trying to set up + a new connection before checking whether the processes handling previous + connections had finished. The check for completed processes is now done + earlier. On busy systems, this bug wouldn't be noticed because something + else would have woken the daemon, and it would have reaped the completed + process earlier. + +80. If a message was submitted locally by a user whose login name contained one + or more spaces (ugh!), the spool file that Exim wrote was not re-readable. + It caused a spool format error. I have fixed the spool reading code. A + related problem was that the "from" clause in the Received: line became + illegal because of the space(s). It is now covered by ${quote_local_part. + +81. Included the latest eximstats from Steve (adds average sizes to HTML Top + tables). + +82. Updated OS/Makefile-AIX as per message from Mike Meredith. + +83. Patch from Sieve maintainer to fix unterminated string problem in + "vacation" handling. + +84. Some minor changes to the Linux configuration files to help with other + OS variants using glibc. + +85. One more patch for Sieve to update vacation handling to latest spec. + ---------------------------------------------------- See the note above about the 4.44 and 4.50 releases. @@ -419,7 +1067,7 @@ Exim version 4.44 17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this support for a long time. Removed HAVE_SYS_VFS_H. -18. Updated exipick to current release +18. Updated exipick to current release from John Jetmore. 19. Allow an empty sender to be matched against a lookup in an address list. Previously the only cases considered were a regular expression, or an @@ -429,10 +1077,16 @@ Exim version 4.44 host was specified on the transport, if the DNS lookup yielded more than one IP address. -21. Respect the 75-character limit for "encoded words" when doing RFC 2047 - encoding, and increase the buffer size for ${rfc2047: expansion. +21. The RFC2047 encoding function was originally intended for short strings + such as real names; it was not keeping to the 75-character limit for + encoded words that the RFC imposes. It now respects the limit, and + generates multiple encoded words if necessary. To be on the safe side, I + have increased the buffer size for the ${rfc2047: expansion operator from + 1024 to 2048 bytes. -22. errors_to on a router was being ignored for bounce messages. +22. Failure to deliver a bounce message always caused it to be frozen, even if + there was an errors_to setting on the router. The errors_to setting is now + respected. 23. If an IPv6 address is given for -bh or -bhc, it is now converted to the canonical form (fully expanded) before being placed in @@ -440,45 +1094,89 @@ Exim version 4.44 24. Updated eximstats to version 1.33 -25. Expand error message when GnuTLS has problems setting up cert/key files. +25. Include certificate and key file names in error message when GnuTLS fails + to set them up, because the GnuTLS error message doesn't include the name + of the failing file when there is a problem reading it. 26. Expand error message when OpenSSL has problems setting up cert/key files. + As per change 25. -27. Reset locale after calling embedded Perl, in case it was changed. +27. Reset the locale to "C" after calling embedded Perl, in case it was changed + (this can affect the format of dates). -28. When checking for a message's continued existence, exim_tidydb was not - looking in the split spool subdirectories. +28. exim_tidydb, when checking for the continued existence of a message for + which it has found a message-specific retry record, was not finding + messages that were in split spool directories. Consequently, it was + deleting retry records that should have stayed in existence. 29. eximstats updated to version 1.35 1.34 - allow eximstats to parse syslog lines as well as mainlog lines 1.35 - bugfix such that pie charts by volume are generated correctly -30. A forced expansion failure in the SPA authenticator is now treated the - same as in other authenticators (it moves to the next authenticator). +30. The SPA authentication driver was not abandoning authentication and moving + on to the next authenticator when an expansion was forced to fail, + contradicting the general specification for all authenticators. Instead it + was generating a temporary error. It now behaves as specified. -31. Fixed the cipher preference order for GnuTLS client usage. +31. The default ordering of permitted cipher suites for GnuTLS was pessimal + (the order specifies the preference for clients). The order is now AES256, + AES128, 3DES, ARCFOUR128. -31. Fixed Sieve buglet: now it explicitly sets From: when generating - an autoreply. +31. Small patch to Sieve code - explicitly set From: when generating an + autoreply. -32. More robust handling of very large SMTP responses. +32. Exim crashed if a remote delivery caused a very long error message to be + recorded - for instance if somebody sent an entire SpamAssassin report back + as a large number of 550 error lines. This bug was coincidentally fixed by + increasing the size of one of Exim's internal buffers (big_buffer) that + happened as part of the Exiscan merge. However, to be on the safe side, I + have made the code more robust (and fixed the comments that describe what + is going on). -33. Check dnsdb PTR key for IP address before reversing. +33. Some experimental protocols are using DNS PTR records for new purposes. The + keys for these records are domain names, not reversed IP addresses. The + dnsdb PTR lookup now tests whether its key is an IP address. If not, it + leaves it alone. Component reversal etc. now happens only for IP addresses. CAN-2005-0021 -34. Put a check in host_aton() to protect against buffer overrun +34. The host_aton() function is supposed to be passed a string that is known + to be a valid IP address. However, in the case of IPv6 addresses, it was + not checking this. This is a hostage to fortune. Exim now panics and dies + if the condition is not met. A case was found where this could be provoked + from a dnsdb PTR lookup with an IPv6 address that had more than 8 + components; fortuitously, this particular loophole had already been fixed + by change 4.50/55 or 4.44/33 above. + + If there are any other similar loopholes, the new check in host_aton() + itself should stop them being exploited. The report I received stated that + data on the command line could provoke the exploit when Exim was running as + exim, but did not say which command line option was involved. All I could + find was the use of -be with a bad dnsdb PTR lookup, and in that case it is + running as the user. CAN-2005-0021 -35. Fix buffer overflow vulnerability in spa_base64_to_bits() function. +35. There was a buffer overflow vulnerability in the SPA authentication code + (which came originally from the Samba project). I have added a test to the + spa_base64_to_bits() function which I hope fixes it. CAN-2005-0022 -36. Need to initialize getloadavg() as root in the daemon when - deliver_drop_privilege is set, for the benefit of the queue runner. +36. The daemon start-up calls getloadavg() while still root for those OS that + need the first call to be done as root, but it missed one case: when + deliver_queue_load_max is set with deliver_drop_privilege. This is + necessary for the benefit of the queue runner, because there is no re-exec + when deliver_drop_privilege is set. -37. Data saved for $host_data after a lookup involving a named host list was - corrupted if there was more than one message in an SMTP session. +37. Caching of lookup data for "hosts =" ACL conditions, when a named host list + was in use, was not putting the data itself into the right store pool; + consequently, it could be overwritten for a subsequent message in the same + SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked + the caching.) -38. Fixed a very old bug that sometimes lost the final 221 message after QUIT. +38. Sometimes the final signoff response after QUIT could fail to get + transmitted in the non-TLS case. Testing !tls_active instead of tls_active + < 0 before doing a fflush(). This bug looks as though it goes back to the + introduction of TLS in release 3.20, but "sometimes" must have been rare + because the tests only now provoked it. Exim version 4.43