X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/a5bd321b2f16ff323e3e268d59606e89b747a901..7d8eec3a17875050f3b147b0f0f4a2f55ec7e5b8:/doc/doc-txt/NewStuff?ds=sidebyside diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 1ec1bdd2c..583fe92f1 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,48 +1,338 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.105 2006/07/13 13:53:32 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/NewStuff,v 1.159 2008/10/16 07:57:01 nm4 Exp $ New Features in Exim -------------------- -This file contains descriptions of new features that have been added to Exim, -but have not yet made it into the main manual (which is most conveniently -updated when there is a relatively large batch of changes). The doc/ChangeLog -file contains a listing of all changes, including bug fixes. +This file contains descriptions of new features that have been added to Exim. +Before a formal release, there may be quite a lot of detail so that people can +test from the snapshots or the CVS before the documentation is updated. Once +the documentation is updated, this file is reduced to a short list. + +Version 4.70 +------------ + + 1. Preliminary SPF Best Guess support. Documentation for this is in + experimental-spec.txt. + + +Version 4.68 +------------ + + 1. The body_linecount and body_zerocount C variables are now exported in the + local_scan API. + + 2. When a dnslists lookup succeeds, the key that was looked up is now placed + in $dnslist_matched. When the key is an IP address, it is not reversed in + this variable (though it is, of course, in the actual lookup). In simple + cases, for example: + + deny dnslists = spamhaus.example + + the key is also available in another variable (in this case, + $sender_host_address). In more complicated cases, however, this is not + true. For example, using a data lookup might generate a dnslists lookup + like this: + + deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|... + + If this condition succeeds, the value in $dnslist_matched might be + 192.168.6.7 (for example). + + 3. Authenticators now have a client_condition option. When Exim is running as + a client, it skips an authenticator whose client_condition expansion yields + "0", "no", or "false". This can be used, for example, to skip plain text + authenticators when the connection is not encrypted by a setting such as: + + client_condition = ${if !eq{$tls_cipher}{}} + + Note that the 4.67 documentation states that $tls_cipher contains the + cipher used for incoming messages. In fact, during SMTP delivery, it + contains the cipher used for the delivery. The same is true for + $tls_peerdn. + + 4. There is now a -Mvc option, which outputs a copy of the + message to the standard output, in RFC 2822 format. The option can be used + only by an admin user. + + 5. There is now a /noupdate option for the ratelimit ACL condition. It + computes the rate and checks the limit as normal, but it does not update + the saved data. This means that, in relevant ACLs, it is possible to lookup + the existence of a specified (or auto-generated) ratelimit key without + incrementing the ratelimit counter for that key. + + In order for this to be useful, another ACL entry must set the rate + for the same key somewhere (otherwise it will always be zero). + + Example: + + acl_check_connect: + # Read the rate; if it doesn't exist or is below the maximum + # we update it below + deny ratelimit = 100 / 5m / strict / noupdate + log_message = RATE: $sender_rate / $sender_rate_period \ + (max $sender_rate_limit) + + [... some other logic and tests...] + + warn ratelimit = 100 / 5m / strict / per_cmd + log_message = RATE UPDATE: $sender_rate / $sender_rate_period \ + (max $sender_rate_limit) + condition = ${if le{$sender_rate}{$sender_rate_limit}} + + accept + + 6. The variable $max_received_linelength contains the number of bytes in the + longest line that was received as part of the message, not counting the + line termination character(s). + + 7. Host lists can now include +ignore_defer and +include_defer, analagous to + +ignore_unknown and +include_unknown. These options should be used with + care, probably only in non-critical host lists such as whitelists. + + 8. There's a new option called queue_only_load_latch, which defaults true. + If set false when queue_only_load is greater than zero, Exim re-evaluates + the load for each incoming message in an SMTP session. Otherwise, once one + message is queued, the remainder are also. + + 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most + cases when an SMTP session ends without sending QUIT. However, when Exim + itself is is bad trouble, such as being unable to write to its log files, + this ACL is not run, because it might try to do things (such as write to + log files) that make the situation even worse. + + Like the QUIT ACL, this new ACL is provided to make it possible to gather + statistics. Whatever it returns (accept or deny) is immaterial. The "delay" + modifier is forbidden in this ACL. + + When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set + to a string that indicates the reason for the termination of the SMTP + connection. The possible values are: + + acl-drop Another ACL issued a "drop" command + bad-commands Too many unknown or non-mail commands + command-timeout Timeout while reading SMTP commands + connection-lost The SMTP connection has been lost + data-timeout Timeout while reading message data + local-scan-error The local_scan() function crashed + local-scan-timeout The local_scan() function timed out + signal-exit SIGTERM or SIGINT + synchronization-error SMTP synchronization error + tls-failed TLS failed to start + + In most cases when an SMTP connection is closed without having received + QUIT, Exim sends an SMTP response message before actually closing the + connection. With the exception of acl-drop, the default message can be + overridden by the "message" modifier in the NOTQUIT ACL. In the case of a + "drop" verb in another ACL, it is the message from the other ACL that is + used. + +10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of + servers with individual queries. This is done by starting the query with + "servers=x:y:z;", where each item in the list may take one of two forms: + + (1) If it is just a host name, the appropriate global option (mysql_servers + or pgsql_servers) is searched for a host of the same name, and the + remaining parameters (database, user, password) are taken from there. + + (2) If it contains any slashes, it is taken as a complete parameter set. + + The list of servers is used in exactly the same was as the global list. + Once a connection to a server has happened and a query has been + successfully executed, processing of the lookup ceases. + + This feature is intended for use in master/slave situations where updates + are occurring, and one wants to update a master rather than a slave. If the + masters are in the list for reading, you might have: + + mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw + + In an updating lookup, you could then write + + ${lookup mysql{servers=master; UPDATE ...} + + If, on the other hand, the master is not to be used for reading lookups: + + pgsql_servers = slave1/db/name/pw:slave2/db/name/pw + + you can still update the master by + + ${lookup pgsql{servers=master/db/name/pw; UPDATE ...} + +11. The message_body_newlines option (default FALSE, for backwards + compatibility) can be used to control whether newlines are present in + $message_body and $message_body_end. If it is FALSE, they are replaced by + spaces. + + +Version 4.67 +------------ + + 1. There is a new log selector called smtp_no_mail, which is not included in + the default setting. When it is set, a line is written to the main log + whenever an accepted SMTP connection terminates without having issued a + MAIL command. + + 2. When an item in a dnslists list is followed by = and & and a list of IP + addresses, the behaviour was not clear when the lookup returned more than + one IP address. This has been solved by the addition of == and =& for "all" + rather than the default "any" matching. + + 3. Up till now, the only control over which cipher suites GnuTLS uses has been + for the cipher algorithms. New options have been added to allow some of the + other parameters to be varied. + + 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is + set, Exim compiles a runtime option called disable_fsync. + + 5. There is a new variable called $smtp_count_at_connection_start. + + 6. There's a new control called no_pipelining. + + 7. There are two new variables called $sending_ip_address and $sending_port. + These are set whenever an SMTP connection to another host has been set up. + + 8. The expansion of the helo_data option in the smtp transport now happens + after the connection to the server has been made. + + 9. There is a new expansion operator ${rfc2047d: that decodes strings that + are encoded as per RFC 2047. + +10. There is a new log selector called "pid", which causes the current process + id to be added to every log line, in square brackets, immediately after the + time and date. + +11. Exim has been modified so that it flushes SMTP output before implementing + a delay in an ACL. It also flushes the output before performing a callout, + as this can take a substantial time. These behaviours can be disabled by + obeying control = no_delay_flush or control = no_callout_flush, + respectively, at some earlier stage of the connection. + +12. There are two new expansion conditions that iterate over a list. They are + called forany and forall. + +13. There's a new global option called dsn_from that can be used to vary the + contents of From: lines in bounces and other automatically generated + messages ("delivery status notifications" - hence the name of the option). + +14. The smtp transport has a new option called hosts_avoid_pipelining. + +15. By default, exigrep does case-insensitive matches. There is now a -I option + that makes it case-sensitive. + +16. A number of new features ("addresses", "map", "filter", and "reduce") have + been added to string expansions to make it easier to process lists of + items, typically addresses. + +17. There's a new ACL modifier called "continue". It does nothing of itself, + and processing of the ACL always continues with the next condition or + modifier. It is provided so that the side effects of expanding its argument + can be used. + +18. It is now possible to use newline and other control characters (those with + values less than 32, plus DEL) as separators in lists. + +19. The exigrep utility now has a -v option, which inverts the matching + condition. + +20. The host_find_failed option in the manualroute router can now be set to + "ignore". + + +Version 4.66 +------------ + +No new features were added to 4.66. + + +Version 4.65 +------------ + +No new features were added to 4.65. + + +Version 4.64 +------------ + + 1. ACL variables can now be given arbitrary names, as long as they start with + "acl_c" or "acl_m" (for connection variables and message variables), are at + least six characters long, with the sixth character being either a digit or + an underscore. + + 2. There is a new ACL modifier called log_reject_target. It makes it possible + to specify which logs are used for messages about ACL rejections. + + 3. There is a new authenticator called "dovecot". This is an interface to the + authentication facility of the Dovecot POP/IMAP server, which can support a + number of authentication methods. + + 4. The variable $message_headers_raw provides a concatenation of all the + messages's headers without any decoding. This is in contrast to + $message_headers, which does RFC2047 decoding on the header contents. + + 5. In a DNS black list, if two domain names, comma-separated, are given, the + second is used first to do an initial check, making use of any IP value + restrictions that are set. If there is a match, the first domain is used, + without any IP value restrictions, to get the TXT record. + + 6. All authenticators now have a server_condition option. + + 7. There is a new command-line option called -Mset. It is useful only in + conjunction with -be (that is, when testing string expansions). It must be + followed by a message id; Exim loads the given message from its spool + before doing the expansions. + + 8. Another similar new command-line option is called -bem. It operates like + -be except that it must be followed by the name of a file that contains a + message. + + 9. When an address is delayed because of a 4xx response to a RCPT command, it + is now the combination of sender and recipient that is delayed in + subsequent queue runs until its retry time is reached. + +10. Unary negation and the bitwise logical operators and, or, xor, not, and + shift, have been added to the eval: and eval10: expansion items. + +11. The variables $interface_address and $interface_port have been renamed + as $received_ip_address and $received_port, to make it clear that they + relate to message reception rather than delivery. (The old names remain + available for compatibility.) + +12. The "message" modifier can now be used on "accept" and "discard" acl verbs + to vary the message that is sent when an SMTP command is accepted. + Version 4.63 ------------ 1. There is a new Boolean option called filter_prepend_home for the redirect - router. It defaults true, for backward compatibility. If a "save" command in - an Exim filter has a relative path for its argument, and $home is defined, - it is automatically prepended to the relative path. This action can now be - prevented by setting filter_prepend_home false. + router. 2. There is a new acl, set by acl_not_smtp_start, which is run right at the start of receiving a non-SMTP message, before any of the message has been - read. (This is the analogue of the acl_smtp_predata ACL for SMTP input.) The - result of this ACL is ignored; it cannot be used to reject a message. If - you really need to, you could set a value in an ACL variable here and reject - based on that in the acl_not_smtp ACL. However, this ACL can be used to set - controls, and in particular, it can be used to set control=suppress_local_ - fixups, which cannot be used in the acl_not_smtp ACL because by the time - that ACL is run, it is too late. When the acl_not_smtp_start ACL is run, the - sender and recipients are known, so the "senders" and "sender_domains" - conditions and $sender_address and $recipients variables can be used. - Variables such as $authenticated_ sender are also available. It is possible - to specify added header lines in this ACL. + read. 3. When an SMTP error message is specified in a "message" modifier in an ACL, or in a :fail: or :defer: message in a redirect router, Exim now checks the - start of the message for an SMTP error code. This consists of three digits - followed by a space, optionally followed by an extended code of the form - n.n.n, also followed by a space. If this is the case and the very first - digit is the same as the default error code, the code from the message is - used instead. If the very first digit is incorrect, a panic error is logged, - and the default code is used. This is an incompatible change, but it is not - expected to affect many (if any) configurations. It is possible to suppress - the use of the supplied code in a redirect router by setting the - smtp_error_code option false. In this case, any SMTP code is quietly - ignored. + start of the message for an SMTP error code. + +4. There is a new parameter for LDAP lookups called "referrals", which takes + one of the settings "follow" (the default) or "nofollow". + +5. Version 20070721.2 of exipick now included, offering these new options: + --reverse + After all other sorting options have bee processed, reverse order + before displaying messages (-R is synonym). + --random + Randomize order of matching messages before displaying. + --size + Instead of displaying the matching messages, display the sum + of their sizes. + --sort [,...] + Before displaying matching messages, sort the messages according to + each messages value for each variable. + --not + Negate the value for every test (returns inverse output from the + same criteria without --not). Version 4.62