X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/a14e56367e5ef12d43aee57e3f8565be8d468845..f64398d361f4b24c3be9aa77a408190783b6af54:/test/README diff --git a/test/README b/test/README index c1398329d..d971bc744 100644 --- a/test/README +++ b/test/README @@ -1,5 +1,3 @@ -$Cambridge: exim/test/README,v 1.8 2007/02/20 15:58:02 ph10 Exp $ - EXPORTABLE EXIM TEST SUITE -------------------------- @@ -65,8 +63,15 @@ In order to run this test suite, the following requirements must be met: Defaults timestamp_timeout=480 in /etc/sudoers, a password lasts for 8 hours (a working day). It is - probably not a good idea to run the tests as the Exim user, as this is - recognized as special by Exim. + not permitted to run the tests as the Exim user because the test suite + tracks the two users independently. Using the same user would result + in false positives on some tests. + + Further, some tests invoke sudo in an environment where there might not be + a TTY, so tickets should be global, not per-TTY. Taking this all together + and assuming a user of "exim-build", you might have this in sudoers: + + Defaults:exim-build timestamp_timeout=480,!tty_tickets (3) The login under which you run the tests must be in the exim group so that it has access to logs, spool files, etc. The login should not be one of the @@ -76,7 +81,8 @@ In order to run this test suite, the following requirements must be met: gecos field is empty but there may be anomalies. (4) The directory into which you unpack the test suite must be accessible by - the Exim user, so that code running as exim can access the files therein. A + the Exim user, so that code running as exim can access the files therein. + This includes search-access on all path elements leading to it. A world-readable directory is fine. However, there may be problems if the path name of the directory is excessively long. This is because it sometimes appears in log lines or debug output, and if it is truncated, it @@ -85,9 +91,10 @@ In order to run this test suite, the following requirements must be met: (5) Exim must be built with its user and group specified at build time, and with certain minimum facilities, namely: - Routers: accept, dnslookup, manualroute, redirect - Transports: appendfile, autoreply, pipe, smtp - Lookups: lsearch + Routers: accept, dnslookup, manualroute, redirect + Transports: appendfile, autoreply, pipe, smtp + Lookups: lsearch + Authenticators: plaintext Most Exim binaries will have these included. @@ -107,6 +114,21 @@ In order to run this test suite, the following requirements must be met: interface; when one is not found, some tests are skipped (with a warning message). +(9) Exim must be built with TRUSTED_CONFIG_LIST support, so that the test + configs can be placed into it. A suitable file location is .../exim/test/trusted_configs + with content .../exim/test/test-config [fill out the ... to make full + paths]. This file should be owner/group matching CONFIGURE_OWNER/GROUP, + or root/root. The config files in .../exim/test/confs/ should be owner/group the same. + DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it + must contain the directory of the test-suite. WHITELIST_D_MACROS should contain: + + DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y + +(10) Exim must *not* be built with USE_READLINE, as the test-suite's automation + assumes the simpler I/O model. + Exim must *not* be built with HEADERS_CHARSET set to UTF-8. + + OPTIONAL EXTRAS --------------- @@ -125,12 +147,15 @@ RUNNING THE TEST SUITE (2) cd into the exim-testsuite-x.xx directory. -(3) Run "./configure" and then "make". This builds a few auxiliary programs - that are written in C. +(3) Run "autoconf" then "./configure" and then "make". This builds a few + auxiliary programs that are written in C. + +(4) echo $PWD/test-config >> your_TRUSTED_CONFIG_LIST_filename + Typically that is .../exim/test/trusted_configs -(4) Run "./runtest" (a Perl script) as described below. +(5) Run "./runtest" (a Perl script) as described below. -(5) If you want to see what tests are available, run "./listtests". +(6) If you want to see what tests are available, run "./listtests". BREAKING OUT OF THE TEST SCRIPT @@ -216,6 +241,11 @@ is as follows: There are some options for the ./runtest script itself: + -CONTINUE This will allow the script to move past some failing tests. It will + write a simple failure line with the test number in a temporary + logfile test/failed-summary.log. Unexpected exit codes will still + stall the test execution and require interaction. + -DEBUG This option is for debugging the test script. It causes some tracing information to be output. @@ -342,7 +372,7 @@ default, the output is from the "cf" program, and might look like this: 1 difference found. "test-stdout-munged" contains 16 lines; "stdout/1300" contains 18 lines. - Continue, Update & retry, Quit? [Q] + Continue, Retry, Update & retry, Quit? [Q] This example was generated by running the test with a version of Exim that had a bug in the exim_dbmbuild utility (the bug was fixed at release @@ -351,7 +381,7 @@ used. In this case, the standard output differed from what was expected. The reply to the prompt must either be empty, in which case it takes the default that is given in brackets (in this case Q), or a single letter, in -upper or lower case (in this case, one of C, U, or Q). If you type anything +upper or lower case (in this case, one of C, R, U, or Q). If you type anything else, the prompt is repeated. "Continue" carries on as if the files had matched; that is, it ignores the @@ -361,6 +391,8 @@ moving on to the next test. "Update & retry" copies the new file to the saved file, and reruns the test after doing any further comparisons that may be necessary. +"Retry" does the same apart from the file copy. + Other circumstances give rise to other prompts. If a test generates output for which there is no saved data, the prompt (after a message stating which file is unexpectely not empty) is: @@ -398,6 +430,40 @@ OTHER ISSUES . Test 0142 tests open file descriptors; on some hosts the output may vary. +. Some tests may fail, for example 0022, because it says it uses cached data + when the expected output thinks it should not be in cache. Item #5 in the + Requirements section has: + "Exim must be built with its user and group specified at build time" + This means that you cannot use the "ref:username" in your Local/Makefile + when building the exim binary, in any of the following fields: + EXIM_USER EXIM_GROUP CONFIGURE_OWNER CONFIGURE_GROUP + +. If the runtest script warns that the hostname is not a Fully Qualified + Domain Name (FQDN), expect that some tests will fail, for example 0036, + with an extra log line saying the hostname doesn't resolve. You must use a + FQDN for the hostname for proper test functionality. + +. If you change your hostname to a FQDN, you must delete the test/dnszones + subdirectory. When you next run the runtest script, it will rebuild the + content to use the new hostname. + +. If your hostname has an uppercase characters in it, expect that some tests + will fail, for example, 0036, because some log lines will have the hostname + in all lowercase. The regex which extracts the hostname from the log lines + will not match the lowercased version. + +. Some tests may fail, for example 0015, with a cryptic error message: + Server return code 99 + Due to security concerns, some specific files MUST have the group write bit + off. For the purposes of the test suite, some test/aux-fixed/* files MUST + have the group write bit off, so it's easier to just remove the group write + bit for all of them. If your umask is set to 002, the group write bit will + be on by default and you'll see this problem, so make sure your umask is + 022 and re-checkout the test/ subdirectory. + +. Some tests will fail if the username and group name are different. It does + not have to be the primary group, a secondary group is sufficient. + OTHER SCRIPTS AND PROGRAMS -------------------------- @@ -614,7 +680,7 @@ only when DBM support is available in Exim, and typically follows the use of a "write" command (see below) that creates the input file. - dumpdb + dump This command runs the exim_dumpdb utility on the testing spool directory, using the database name given, for example: "dumpdb retry". @@ -665,6 +731,12 @@ This command causes the script to sleep for m milliseconds. Nothing is output to the screen. + munge + +This command requests custom munging of the test outputs. The munge names +used are coded in the runtest script (look for 'name of munge'). + + need_ipv4 This command must be at the head of a script. If no IPv4 interface has been @@ -767,7 +839,7 @@ This command runs the auxiliary "client" program that simulates an SMTP client. It is controlled by a script read from its standard input, details of which are given below. There are two options. One is -t, which must be followed directly by a number, to specify the command timeout in seconds (e.g. -t5). The default -timeout is 1 second. The other option is -tls-on-connect, which causes the +timeout is 5 seconds. The other option is -tls-on-connect, which causes the client to try to start up a TLS session as soon as it has connected, without using the STARTTLS command. The client program connects to the given IP address and port, using the specified interface, if one is given. @@ -778,9 +850,11 @@ and port, using the specified interface, if one is given. When OpenSSL is available on the host, an alternative version of the client program is compiled, one that supports TLS using OpenSSL. The additional -arguments specify a certificate and key file when required. There is one -additional option, -tls-on-connect, that causes the client to initiate TLS -negotiation immediately on connection. +arguments specify a certificate and key file when required for the connection. +There are two additional options: -tls-on-connect, that causes the client to +initiate TLS negociation immediately on connection; -ocsp that causes the TLS +negotiation to include a certificate-status request. The latter takes a +filename argument, the CA info for verifying the stapled response. client-gnutls [] [] \ @@ -826,13 +900,15 @@ input, details of which are given below. A number of options are implemented: -d causes the server to output debugging information - -t sets a timeout in seconds (default 5) for when the server is + -t sets a timeout (default 5) for when the server is awaiting an incoming connection -noipv4 causes the server not to set up an IPv4 socket -noipv6 causes the server not to set up an IPv6 socket + -i sets an initial pause, to delay before creating the listen sockets + By default, in an IPv6 environment, both kinds of socket are set up. However, the test script knows which interfaces actually exist on the host, and it adds -noipv4 or -noipv6 to the server command as required. An error occurs if both @@ -948,7 +1024,10 @@ are of the following kinds: (d) If the line starts with ">*eof", nothing is sent and the connection is closed. - The data that is sent starts after the initial '>' sequence. + The data that is sent starts after the initial '>' sequence. Within + each line the sequence '\x' followed by two hex digits can be used + to specify an arbitrary byte value. The sequence '\\' specifies a + single backslash. (2) A line that starts with "*sleep" specifies a number of seconds to wait before proceeding. @@ -962,7 +1041,10 @@ are of the following kinds: (5) Otherwise, the line defines the start of an input line that the client is expected to send. To allow for lines that start with digits, the line may start with '<', which is not taken as part of the input data. If the - input does not match, the server bombs out with an error message. + lines starts with '<<' then only the characters are expected; no return- + linefeed terminator. If the input does not match, the server bombs out + with an error message. Backslash-escape sequences may be used in the + line content as for output lines. Here is a simple example of server use in a test script: