X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/a09f294202729d7e532a1584536fa14e491a0b71..0b8f4f1a0c68bd48a98fb033039bac7d88182b6f:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 84540508f..b6d283b95 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -45,7 +45,7 @@ . Update the Copyright year (only) when changing content. . ///////////////////////////////////////////////////////////////////////////// -.set previousversion "4.89" +.set previousversion "4.90" .include ./local_params .set ACL "access control lists (ACLs)" @@ -1667,6 +1667,9 @@ Symbolic links to the sources are installed in this directory, which is where the actual building takes place. In most cases, Exim can discover the machine architecture and operating system for itself, but the defaults can be overridden if necessary. +.cindex compiler requirements +.cindex compiler version +A C99-capable compiler will be required for the build. .section "PCRE library" "SECTpcre" @@ -2788,6 +2791,11 @@ files or databases you are using, you must exit and restart Exim before trying the same lookup again. Otherwise, because each Exim process caches the results of lookups, you will just get the same result as before. +Macro processing is done on lines before string-expansion: new macros can be +defined and macros will be expanded. +Because macros in the config file are often used for secrets, those are only +available to admin users. + .vitem &%-bem%&&~<&'filename'&> .oindex "&%-bem%&" .cindex "testing" "string expansion" @@ -3857,14 +3865,12 @@ This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option, and passes on the fact that the host to which Exim is connected supports TLS encryption. -.new .vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&> .oindex "&%-MCt%&" This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option, and passes on the fact that the connection is being proxied by a parent process for handling TLS encryption. The arguments give the local address and port being proxied, and the TLS cipher. -.wen .vitem &%-Mc%&&~<&'message&~id'&>&~<&'message&~id'&>&~... .oindex "&%-Mc%&" @@ -9964,7 +9970,7 @@ a regular expression, and a substitution string. For example: ${sg{abcdefabcdef}{abc}{xyz}} .endd yields &"xyzdefxyzdef"&. Because all three arguments are expanded before use, -if any $ or \ characters are required in the regular expression or in the +if any $, } or \ characters are required in the regular expression or in the substitution string, they have to be escaped. For example: .code ${sg{abcdef}{^(...)(...)\$}{\$2\$1}} @@ -10115,7 +10121,15 @@ character. For example: .code ${addresses:>& Chief , sec@base.ment (dogsbody)} .endd -expands to &`ceo@up.stairs&&sec@base.ment`&. Compare the &*address*& (singular) +expands to &`ceo@up.stairs&&sec@base.ment`&. The string is expanded +first, so if the expanded string starts with >, it may change the output +separator unintentionally. This can be avoided by setting the output +separator explicitly: +.code +${addresses:>:$h_from:} +.endd + +Compare the &*address*& (singular) expansion item, which extracts the working address from a single RFC2822 address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of processing lists. @@ -11032,12 +11046,10 @@ colon-separated components are permitted, each containing from one to four hexadecimal digits. There may be fewer than eight components if an empty component (adjacent colons) is present. Only one empty component is permitted. -.new &*Note*&: The checks used to be just on the form of the address; actual numerical values were not considered. Thus, for example, 999.999.999.999 passed the IPv4 check. This is no longer the case. -.wen The main use of these tests is to distinguish between IP addresses and host names, or between IPv4 and IPv6 addresses. For example, you could use @@ -11647,8 +11659,11 @@ contain the trailing slash. If &$config_file$& does not contain a slash, .vindex "&$config_file$&" The name of the main configuration file Exim is using. +.vitem &$dkim_verify_status$& &&& +Results of DKIM verification. +For details see section &<>&. + .vitem &$dkim_cur_signer$& &&& - &$dkim_verify_status$& &&& &$dkim_verify_reason$& &&& &$dkim_domain$& &&& &$dkim_identity$& &&& @@ -11668,13 +11683,13 @@ The name of the main configuration file Exim is using. &$dkim_key_notes$& &&& &$dkim_key_length$& These variables are only available within the DKIM ACL. -For details see chapter &<>&. +For details see section &<>&. .vitem &$dkim_signers$& .vindex &$dkim_signers$& When a message has been received this variable contains a colon-separated list of signer domains and identities for the message. -For details see chapter &<>&. +For details see section &<>&. .vitem &$dnslist_domain$& &&& &$dnslist_matched$& &&& @@ -12068,9 +12083,7 @@ when the ACL &%malware%& condition is true (see section &<>&). This variable contains the number of bytes in the longest line that was received as part of the message, not counting the line termination character(s). -.new It is not valid if the &%spool_files_wireformat%& option is used. -.wen .vitem &$message_age$& .cindex "message" "age of" @@ -12113,11 +12126,9 @@ in bytes. The count starts from the character after the blank line that separates the body from the header. Newlines are included in the count. See also &$message_size$&, &$body_linecount$&, and &$body_zerocount$&. -.new If the spool file is wireformat (see the &%spool_files_wireformat%& main option) the CRLF line-terminators are included in the count. -.wen .vitem &$message_exim_id$& .vindex "&$message_exim_id$&" @@ -12169,9 +12180,7 @@ deny message = Too many lines in message header In the MAIL and RCPT ACLs, the value is zero because at that stage the message has not yet been received. -.new This variable is not valid if the &%spool_files_wireformat%& option is used. -.wen .vitem &$message_size$& .cindex "size" "of message" @@ -12793,14 +12802,12 @@ argument, that is, the text that follows the command name, with leading white space removed. Following the introduction of &$smtp_command$&, this variable is somewhat redundant, but is retained for backwards compatibility. -.new .vitem &$smtp_command_history$& .cindex SMTP "command history" .vindex "&$smtp_command_history$&" A comma-separated list (with no whitespace) of the most-recent SMTP commands received, in time-order left to right. Only a limited number of commands are remembered. -.wen .vitem &$smtp_count_at_connection_start$& .vindex "&$smtp_count_at_connection_start$&" @@ -12826,6 +12833,14 @@ A number of variables whose names start with &$spam$& are available when Exim is compiled with the content-scanning extension. For details, see section &<>&. +.new +.vitem &$spf_header_comment$& &&& + &$spf_received$& &&& + &$spf_result$& &&& + &$spf_smtp_comment$& +These variables are only available if Exim is built with SPF support. +For details see section &<>&. +.wen .vitem &$spool_directory$& .vindex "&$spool_directory$&" @@ -12888,6 +12903,9 @@ It is only useful as the argument of a &%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator, or a &%def%& condition. +&*Note*&: Under current versions of OpenSSL, when a list of more than one +file is used for &%tls_certificate%&, this variable is not reliable. + .vitem &$tls_in_peercert$& .vindex "&$tls_in_peercert$&" This variable refers to the certificate presented by the peer of an @@ -14076,7 +14094,7 @@ acknowledgment is sent. See chapter &<>& for further details. This option defines the ACL that is run for each DKIM signature (by default, or as specified in the dkim_verify_signers option) of a received message. -See chapter &<>& for further details. +See section &<>& for further details. .option acl_smtp_etrn main string&!! unset .cindex "ETRN" "ACL for" @@ -14472,13 +14490,11 @@ The CHUNKING extension (RFC3030) will be advertised in the EHLO message to these hosts. Hosts may use the BDAT command as an alternate to DATA. -.new .option commandline_checks_require_admin main boolean &`false`& .cindex "restricting access to features" This option restricts various basic checking features to require an administrative user. This affects most of the &%-b*%& options, such as &%-be%&. -.wen .option debug_store main boolean &`false`& .cindex debugging "memory corruption" @@ -14611,7 +14627,7 @@ to handle IPv6 literal addresses. This option gives a list of DKIM domains for which the DKIM ACL is run. It is expanded after the message is received; by default it runs the ACL once for each signature in the message. -See chapter &<>&. +See section &<>&. .option dns_again_means_nonexist main "domain list&!!" unset @@ -16796,17 +16812,21 @@ response to EHLO only to those client hosts that match this option. See chapter &<>& for details of Exim's support for internationalisation. -.option spamd_address main string "see below" +.option spamd_address main string "127.0.0.1 783" This option is available when Exim is compiled with the content-scanning extension. It specifies how Exim connects to SpamAssassin's &%spamd%& daemon. -The default value is -.code -127.0.0.1 783 -.endd See section &<>& for more details. +.new +.option spf_guess main string "v=spf1 a/24 mx/24 ptr ?all" +This option is available when Exim is compiled with SPF support. +See section &<>& for more details. +.wen + + + .option split_spool_directory main boolean false .cindex "multiple spool directories" .cindex "spool directory" "split" @@ -16857,7 +16877,6 @@ as failures in the configuration file. By using this option to override the compiled-in path, it is possible to run tests of Exim without using the standard spool. -.new .option spool_wireformat main boolean false .cindex "spool directory" "file formats" If this option is set, Exim may for some messages use an alternate format @@ -16881,7 +16900,6 @@ will need to be aware of the potential different format. Using any of the ACL conditions noted will negate the reception benefit (as a Unix-mbox-format file is contructed for them). The transimssion benefit is maintained. -.wen .option sqlite_lock_timeout main time 5s .cindex "sqlite lookup type" "lock timeout" @@ -17089,11 +17107,13 @@ using the &%tls_certificate%& option. If TLS support for incoming connections is not required the &%tls_advertise_hosts%& option should be set empty. -.option tls_certificate main string&!! unset +.option tls_certificate main string list&!! unset .cindex "TLS" "server certificate; location of" .cindex "certificate" "server, location of" -The value of this option is expanded, and must then be the absolute path to a -file which contains the server's certificates. The server's private key is also +The value of this option is expanded, and must then be a list of absolute paths to +files which contains the server's certificates. Commonly only one file is +needed. +The server's private key is also assumed to be in this file if &%tls_privatekey%& is unset. See chapter &<>& for further details. @@ -17102,6 +17122,15 @@ receiving incoming messages as a server. If you want to supply certificates for use when sending messages as a client, you must set the &%tls_certificate%& option in the relevant &(smtp)& transport. +&*Note*&: If you use filenames based on IP addresses, change the list +separator in the usual way to avoid confusion under IPv6. + +&*Note*&: Under current versions of OpenSSL, when a list of more than one +file is used, the &$tls_in_ourcert$& veriable is unreliable. + +&*Note*&: OCSP stapling is not usable under OpenSSL +when a list of more than one file is used. + If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then if the OpenSSL build supports TLS extensions and the TLS client sends the Server Name Indication extension, then this option and others documented in @@ -17114,7 +17143,15 @@ generated for every connection. .cindex "TLS" "server certificate revocation list" .cindex "certificate" "revocation list for server" This option specifies a certificate revocation list. The expanded value must -be the name of a file that contains a CRL in PEM format. +be the name of a file that contains CRLs in PEM format. + +.new +Under OpenSSL the option can specify a directory with CRL files. + +&*Note:*& Under OpenSSL the option must, if given, supply a CRL +for each signing element of the certificate chain (i.e. all but the leaf). +For the file variant this can be multiple PEM blocks in the one file. +.wen See &<>& for discussion of when this option might be re-expanded. @@ -17241,6 +17278,12 @@ Certificate Authority. Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later). +.new +For GnuTLS 3.5.6 or later the expanded value of this option can be a list +of files, to match a list given for the &%tls_certificate%& option. +The ordering of the two lists must match. +.wen + .option tls_on_connect_ports main "string list" unset .cindex SSMTP @@ -17252,10 +17295,11 @@ further details, see section &<>&. -.option tls_privatekey main string&!! unset +.option tls_privatekey main string list&!! unset .cindex "TLS" "server private key; location of" -The value of this option is expanded, and must then be the absolute path to a -file which contains the server's private key. If this option is unset, or if +The value of this option is expanded, and must then be a list of absolute paths to +files which contains the server's private keys. +If this option is unset, or if the expansion is forced to fail, or the result is an empty string, the private key is assumed to be in the same file as the server's certificates. See chapter &<>& for further details. @@ -23795,7 +23839,9 @@ of the message. Its value must not be zero. See also &%final_timeout%&. .option dkim_private_key smtp string&!! unset .option dkim_canon smtp string&!! unset .option dkim_strict smtp string&!! unset -.option dkim_sign_headers smtp string&!! unset +.option dkim_sign_headers smtp string&!! "per RFC" +.option dkim_hash smtp string&!! sha256 +.option dkim_identity smtp string&!! unset DKIM signing options. For details see section &<>&. @@ -24039,7 +24085,6 @@ been started will not be passed to a new delivery process for sending another message on the same connection. See section &<>& for an explanation of when this might be needed. -.new .option hosts_noproxy_tls smtp "host list&!!" * .cindex "TLS" "passing connection" .cindex "multiple SMTP deliveries" @@ -24055,7 +24100,6 @@ instead, and the original process maintains the TLS connection and proxies the SMTP connection from and to the new process and any subsequents. The new process has no access to TLS information, so cannot include it in logging. -.wen @@ -24134,7 +24178,7 @@ This option provides a list of servers to which, provided they announce CHUNKING support, Exim will attempt to use BDAT commands rather than DATA. BDAT will not be used in conjunction with a transport filter. -.option hosts_try_fastopen smtp "host list!!" unset +.option hosts_try_fastopen smtp "host list&!!" unset .cindex "fast open, TCP" "enabling, in client" .cindex "TCP Fast Open" "enabling, in client" .cindex "RFC 7413" "TCP Fast Open" @@ -24150,6 +24194,9 @@ as the initiator must present a cookie in the SYN segment. On (at least some) current Linux distributions the facility must be enabled in the kernel by the sysadmin before the support is usable. +There is no option for control of the server side; if the system supports +it it is always enebled. Note that legthy operations in the connect ACL, +such as DNSBL lookups, will still delay the emission of the SMTP banner. .option hosts_try_prdr smtp "host list&!!" * .cindex "PRDR" "enabling, optional in client" @@ -27092,6 +27139,9 @@ When using OpenSSL, this option is ignored. (If an API is found to let OpenSSL be configured in this way, let the Exim Maintainers know and we'll likely use it). .next +With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option +main option, it must be ordered to match the &%tls_certificate%& list. +.next Some other recently added features may only be available in one or the other. This should be documented with the feature. If the documentation does not explicitly state that the feature is infeasible in the other TLS @@ -27247,6 +27297,10 @@ tls_require_ciphers = ${if =={$received_port}{25}\ {HIGH:!MD5:!SHA1}} .endd +This example will prefer ECDSA-authenticated ciphers over RSA ones: +.code +tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT +.endd .section "Requiring specific ciphers or other parameters in GnuTLS" &&& @@ -27335,8 +27389,7 @@ from someone able to intercept the communication. Further protection requires some further configuration at the server end. -It is rumoured that all existing clients that support TLS/SSL use RSA -encryption. To make this work you need to set, in the server, +To make TLS work you need to set, in the server, .code tls_certificate = /some/file/name tls_privatekey = /some/file/name @@ -27355,6 +27408,13 @@ is assumed to be the case. The certificate file may also contain intermediate certificates that need to be sent to the client to enable it to authenticate the server's certificate. +For dual-stack (eg. RSA and ECDSA) configurations, these options can be +colon-separated lists of file paths. Ciphers using given authentication +algorithms require the presence of a suitable certificate to supply the +public-key. The server selects among the certificates to present to the +client depending on the selected cipher, hence the priority ordering for +ciphers will affect which certificate is used. + If you do not understand about certificates and keys, please try to find a source of this background information, which is not Exim-specific. (There are a few comments below in section &<>&.) @@ -27588,11 +27648,10 @@ if it requests it. If the server is Exim, it will request a certificate only if If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it specifies a collection of expected server certificates. -These may be the system default set (depending on library version), -a file or, -depending on library version, a directory, -must name a file or, -for OpenSSL only (not GnuTLS), a directory. +These may be +the system default set (depending on library version), +a file, +or (depending on library version) a directory. The client verifies the server's certificate against this collection, taking into account any revoked certificates that are in the list defined by &%tls_crl%&. @@ -27690,19 +27749,14 @@ option (prior to expansion) then the following options will be re-expanded during TLS session handshake, to permit alternative values to be chosen: .ilist -.vindex "&%tls_certificate%&" &%tls_certificate%& .next -.vindex "&%tls_crl%&" &%tls_crl%& .next -.vindex "&%tls_privatekey%&" &%tls_privatekey%& .next -.vindex "&%tls_verify_certificates%&" &%tls_verify_certificates%& .next -.vindex "&%tls_ocsp_file%&" &%tls_ocsp_file%& .endlist @@ -27732,7 +27786,6 @@ built, then you have SNI support). "SECTmulmessam" .cindex "multiple SMTP deliveries with TLS" .cindex "TLS" "multiple message deliveries" -.new Exim sends multiple messages down the same TCP/IP connection by starting up an entirely new delivery process for each message, passing the socket from one process to the next. This implementation does not fit well with the use @@ -27745,7 +27798,6 @@ unencrypted data stream from and to the delivery processes. An older mode of operation can be enabled on a per-host basis by the &%hosts_noproxy_tls%& option on the &(smtp)& transport. If the host matches this list the proxy process descibed above is not used; instead Exim -.wen shuts down an existing TLS session being run by the delivery process before passing the socket to a new process. The new process may then try to start a new TLS session, and if successful, may try to re-authenticate @@ -28075,7 +28127,7 @@ otherwise specified, the default action is to accept. This ACL is evaluated before &%acl_smtp_mime%& and &%acl_smtp_data%&. -For details on the operation of DKIM, see chapter &<>&. +For details on the operation of DKIM, see section &<>&. .section "The SMTP MIME ACL" "SECID194" @@ -28953,6 +29005,8 @@ effect. .vitem &*queue*&&~=&~<&'text'&> +.cindex "&%queue%& ACL modifier" +.cindex "named queues" "selecting in ACL" This modifier specifies the use of a named queue for spool files for the message. It can only be used before the message is received (i.e. not in @@ -28976,6 +29030,7 @@ This modifier puts a value into one of the ACL variables (see section .vitem &*udpsend*&&~=&~<&'parameters'&> +.cindex "UDP communications" This modifier sends a UDP packet, for purposes such as statistics collection or behaviour monitoring. The parameters are expanded, and the result of the expansion must be a colon-separated list consisting @@ -29075,11 +29130,9 @@ and cannot depend on content of received headers. Note also that headers cannot be modified by any of the post-data ACLs (DATA, MIME and DKIM). Headers may be modified by routers (subject to the above) and transports. -.new The Received-By: header is generated as soon as the body reception starts, rather than the traditional time after the full message is received; this will affect the timestamp. -.wen All the usual ACLs are called; if one results in the message being rejected, all effort spent in delivery (including the costs on @@ -29140,7 +29193,7 @@ contexts): .cindex "disable DKIM verify" .cindex "DKIM" "disable verify" This control turns off DKIM verification processing entirely. For details on -the operation and configuration of DKIM, see chapter &<>&. +the operation and configuration of DKIM, see section &<>&. .vitem &*control&~=&~dscp/*&<&'value'&> @@ -31015,7 +31068,6 @@ need to use this option unless you know that the called hosts make use of the sender when checking recipients. If used indiscriminately, it reduces the usefulness of callout caching. -.new .vitem &*hold*& This option applies to recipient callouts only. For example: .code @@ -31030,7 +31082,6 @@ The advantage is only gained if there are no callout cache hits if the use_sender option is used, if neither the random nor the use_postmaster option is used, and if no other callouts intervene. -.wen .endlist If you use any of the parameters that set a non-empty sender for the MAIL @@ -31264,6 +31315,7 @@ address and some time-based randomizing information. The &%prvs%& expansion item creates a signed address, and the &%prvscheck%& expansion item checks one. The syntax of these expansion items is described in section &<>&. +The validity period on signed addresses is seven days. As an example, suppose the secret per-address keys are stored in an MySQL database. A query to look up the key for an address could be defined as a macro @@ -31496,7 +31548,10 @@ av_scanner = sophie:/var/run/sophie If the value of &%av_scanner%& starts with a dollar character, it is expanded before use. The usual list-parsing of the content (see &<>&) applies. -The following scanner types are supported in this release: +The following scanner types are supported in this release, +.new +though individual ones can be included or not at build time: +.wen .vlist .vitem &%avast%& @@ -31584,8 +31639,6 @@ option, then the ClamAV interface will pass a filename containing the data to be scanned, which will should normally result in less I/O happening and be more efficient. Normally in the TCP case, the data is streamed to ClamAV as Exim does not assume that there is a common filesystem with the remote host. -There is an option WITH_OLD_CLAMAV_STREAM in &_src/EDITME_& available, should -you be running a version of ClamAV prior to 0.95. The final example shows that multiple TCP targets can be specified. Exim will randomly use one for each incoming email (i.e. it load balances them). Note @@ -31667,7 +31720,6 @@ av_scanner = f-protd:localhost 10200-10204 .endd If you omit the argument, the default values show above are used. -.new .vitem &%f-prot6d%& .cindex "virus scanners" "f-prot6d" The f-prot6d scanner is accessed using the FPSCAND protocol over TCP. @@ -31677,7 +31729,6 @@ For example: av_scanner = f-prot6d:localhost 10200 .endd If you omit the argument, the default values show above are used. -.wen .vitem &%fsecure%& .cindex "virus scanners" "F-Secure" @@ -31727,13 +31778,11 @@ For example: .code av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)$ .endd -.new Note that surrounding whitespace is stripped from each option, meaning there is no way to specify a trailing newline. The socket specifier and both regular-expressions are required. Default for the commandline is &_%s\n_& (note this does have a trailing newline); specify an empty element to get this. -.wen .vitem &%sophie%& .cindex "virus scanners" "Sophos and Sophie" @@ -32573,15 +32622,11 @@ C variables are as follows: .vlist .vitem &*int&~body_linecount*& This variable contains the number of lines in the message's body. -.new It is not valid if the &%spool_files_wireformat%& option is used. -.wen .vitem &*int&~body_zerocount*& This variable contains the number of binary zero bytes in the message's body. -.new It is not valid if the &%spool_files_wireformat%& option is used. -.wen .vitem &*unsigned&~int&~debug_selector*& This variable is set to zero when no debugging is taking place. Otherwise, it @@ -35905,12 +35950,10 @@ SMTP RCPT commands in one transaction) the second and subsequent addresses are flagged with &`->`& instead of &`=>`&. When two or more messages are delivered down a single SMTP connection, an asterisk follows the IP address in the log lines for the second and subsequent messages. -.new When two or more messages are delivered down a single TLS connection, the DNS and some TLS-related information logged for the first message delivered will not be present in the log lines for the second and subsequent messages. TLS cipher information is still available. -.wen .cindex "delivery" "cutthrough; logging" .cindex "cutthrough" "logging" @@ -36015,6 +36058,7 @@ the following table: &` `& command list for &"no mail in SMTP session"& &`CV `& certificate verification status &`D `& duration of &"no mail in SMTP session"& +&`DKIM`& domain verified in incoming message &`DN `& distinguished name from peer certificate &`DS `& DNSSEC secured lookups &`DT `& on &`=>`& lines: time taken for a delivery @@ -36037,6 +36081,7 @@ the following table: &`SNI `& server name indication from TLS client hello &`ST `& shadow transport name &`T `& on &`<=`& lines: message subject (topic) +&`TFO `& connection took advantage of TCP Fast Open &` `& on &`=>`& &`**`& and &`==`& lines: transport name &`U `& local user or RFC 1413 identity &`X `& TLS cipher suite @@ -36083,6 +36128,12 @@ A delivery set up by a router configured with .endd failed. The delivery was discarded. .endlist olist +.next +.new +.cindex DKIM "log line" +&'DKIM: d='&&~&~Verbose results of a DKIM verification attempt, if enabled for +logging and the message has a DKIM signature header. +.wen .endlist ilist @@ -36110,6 +36161,8 @@ selection marked by asterisks: &`*delay_delivery `& immediate delivery delayed &` deliver_time `& time taken to perform delivery &` delivery_size `& add &`S=`&&'nnn'& to => lines +&`*dkim `& DKIM verified domain on <= lines +&` dkim_verbose `& separate full DKIM verification result line, per signature &`*dnslist_defer `& defers of DNS list (aka RBL) lookups &` dnssec `& DNSSEC secured lookups &`*etrn `& ETRN commands @@ -36118,6 +36171,7 @@ selection marked by asterisks: &` incoming_interface `& local interface on <= and => lines &` incoming_port `& remote port on <= lines &`*lost_incoming_connection `& as it says (includes timeouts) +&` millisec `& millisecond timestamps and QT,DT,D times &` outgoing_interface `& local interface on => lines &` outgoing_port `& add remote port to => lines &`*queue_run `& start and end queue runs @@ -36207,12 +36261,25 @@ process is started because &%queue_only%& is set or &%-odq%& was used. .cindex "log" "delivery duration" &%deliver_time%&: For each delivery, the amount of real time it has taken to perform the actual delivery is logged as DT=<&'time'&>, for example, &`DT=1s`&. +If millisecond logging is enabled, short times will be shown with greater +precision, eg. &`DT=0.304`&. .next .cindex "log" "message size on delivery" .cindex "size" "of message" &%delivery_size%&: For each delivery, the size of message delivered is added to the &"=>"& line, tagged with S=. .next +.new +.cindex log "DKIM verification" +.cindex DKIM "verification logging" +&%dkim%&: For message acceptance log lines, when an DKIM signture in the header +verifies successfully a tag of DKIM is added, with one of the verified domains. +.next +.cindex log "DKIM verification" +.cindex DKIM "verification logging" +&%dkim_verbose%&: A log entry is written for each attempted DKIM verification. +.wen +.next .cindex "log" "dnslist defer" .cindex "DNS list" "logging defer" .cindex "black list (DNS)" @@ -36282,6 +36349,12 @@ important with the widening use of NAT (see RFC 2505). &%lost_incoming_connection%&: A log line is written when an incoming SMTP connection is unexpectedly dropped. .next +.cindex "log" "millisecond timestamps" +.cindex millisecond logging +.cindex timstamps "millisecond, in logs" +&%millisec%&: Timestamps have a period and three decimal places of finer granularity +appended to the seconds value. +.next .cindex "log" "outgoing interface" .cindex "log" "local interface" .cindex "log" "local address and port" @@ -36320,6 +36393,8 @@ includes reception time as well as the delivery time for the current address. This means that it may be longer than the difference between the arrival and delivery log line times, because the arrival log line is not written until the message has been successfully received. +If millisecond logging is enabled, short times will be shown with greater +precision, eg. &`QT=1.578s`&. .next &%queue_time_overall%&: The amount of time the message has been in the queue on the local host is logged as QT=<&'time'&> on &"Completed"& lines, for @@ -38022,13 +38097,11 @@ the contents of files on the spool via the Exim monitor (which runs unprivileged), Exim must be built to allow group read access to its spool files. -.new By default, regular users are trusted to perform basic testing and introspection commands, as themselves. This setting can be tightened by setting the &%commandline_checks_require_admin%& option. This affects most of the checking options, such as &%-be%& and anything else &%-b*%&. -.wen .section "Spool files" "SECID275" @@ -38149,12 +38222,10 @@ file remains in existence. When Exim next processes the message, it notices the -J file and uses it to update the -H file before starting the next delivery attempt. -.new Files whose names end with -K or .eml may also be seen in the spool. These are temporaries used for DKIM or malware processing, when that is used. They should be tidied up by normal operations; any old ones are probably relics of crashes and can be removed. -.wen .section "Format of the -H file" "SECID282" .cindex "uid (user id)" "in spool file" @@ -38316,13 +38387,11 @@ to ensure that the caller is displayed in queue listings). If a message was scanned by SpamAssassin, this is present. It records the value of &$spam_score_int$&. -.new .vitem &%-spool_file_wireformat%& The -D file for this message is in wire-format (for ESMTP CHUNKING) rather than Unix-format. The line-ending is CRLF rather than newline. There is still, however, no leading-dot-stuffing. -.wen .vitem &%-tls_certificate_verified%& A TLS certificate was received from the client that sent this message, and the @@ -38431,7 +38500,6 @@ unqualified domain &'foundation'&. .ecindex IIDforspo2 .ecindex IIDforspo3 -.new .section "Format of the -D file" "SECID282a" The data file is traditionally in Unix-standard format: lines are ended with an ASCII newline character. @@ -38443,20 +38511,27 @@ suitable for direct copying to the wire when transmitting using the ESMTP CHUNKING option, meaning lower processing overhead. Lines are terminated with an ASCII CRLF pair. There is no dot-stuffing (and no dot-termination). -.wen . //////////////////////////////////////////////////////////////////////////// . //////////////////////////////////////////////////////////////////////////// -.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHAPdkim" &&& - "DKIM Support" +.chapter "DKIM and SPF" "CHAPdkim" &&& + "DKIM and SPF Support" .cindex "DKIM" +.section "DKIM (DomainKeys Identified Mail)" SECDKIM + DKIM is a mechanism by which messages sent by some entity can be provably linked to a domain which that entity controls. It permits reputation to be tracked on a per-domain basis, rather than merely upon source IP address. DKIM is documented in RFC 4871. +.new +As DKIM relies on the message being unchanged in transit, messages handled +by a mailing-list (which traditionally adds to the message) will not match +any original DKIM signature. +.wen + DKIM support is compiled into Exim by default if TLS support is present. It can be disabled by setting DISABLE_DKIM=yes in &_Local/Makefile_&. @@ -38501,20 +38576,20 @@ These options take (expandable) strings as arguments. .option dkim_domain smtp string list&!! unset The domain(s) you want to sign with. -.new After expansion, this can be a list. Each element in turn is put into the &%$dkim_domain%& expansion variable while expanding the remaining signing options. -.wen -If it is empty after expansion, DKIM signing is not done. +If it is empty after expansion, DKIM signing is not done, +and no error will result even if &%dkim_strict%& is set. -.option dkim_selector smtp string&!! unset +.option dkim_selector smtp string list&!! unset This sets the key selector string. -You can use the &%$dkim_domain%& expansion variable to look up a matching selector. -The result is put in the expansion +After expansion, which can use &$dkim_domain$&, this can be a list. +Each element in turn is put in the expansion variable &%$dkim_selector%& which may be used in the &%dkim_private_key%& option along with &%$dkim_domain%&. -If the option is empty after expansion, DKIM signing is not done. +If the option is empty after expansion, DKIM signing is not done for this domain, +and no error will result even if &%dkim_strict%& is set. .option dkim_private_key smtp string&!! unset This sets the private key to use. @@ -38531,7 +38606,17 @@ be "0", "false" or the empty string, in which case the message will not be signed. This case will not result in an error, even if &%dkim_strict%& is set. .endlist -If the option is empty after expansion, DKIM signing is not done. + +.option dkim_hash smtp string&!! sha256 +Can be set alternatively to &"sha1"& to use an alternate hash +method. Note that sha1 is now condidered insecure, and deprecated. + +.option dkim_identity smtp string&!! unset +If set after expansion, the value is used to set an "i=" tag in +the signing header. The DKIM standards restrict the permissible +syntax of this optional tag to a mail address, with possibly-empty +local part, an @, and a domain identical to or subdomain of the "d=" +tag value. Note that Exim does not check the value. .option dkim_canon smtp string&!! unset This option sets the canonicalization method used when signing a message. @@ -38546,14 +38631,29 @@ either "1" or "true", Exim will defer. Otherwise Exim will send the message unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion variables here. -.option dkim_sign_headers smtp string&!! unset -If set, this option must expand to (or be specified as) a colon-separated -list of header names. Headers with these names will be included in the message -signature. -When unspecified, the header names recommended in RFC4871 will be used. - - -.section "Verifying DKIM signatures in incoming mail" "SECID514" +.option dkim_sign_headers smtp string&!! "see below" +If set, this option must expand to a colon-separated +list of header names. +Headers with these names, or the absence or such a header, will be included +in the message signature. +When unspecified, the header names listed in RFC4871 will be used, +whether or not each header is present in the message. +The default list is available for the expansion in the macro +"_DKIM_SIGN_HEADERS". + +If a name is repeated, multiple headers by that name (or the absence therof) +will be signed. The textually later headers in the headers part of the +message are signed first, if there are multiples. + +A name can be prefixed with either an '=' or a '+' character. +If an '=' prefix is used, all headers that are present with this name +will be signed. +If a '+' prefix if used, all headers that are present with this name +will be signed, and one signtature added for a missing header with the +name will be appended. + + +.section "Verifying DKIM signatures in incoming mail" "SECDKIMVFY" .cindex "DKIM" "verification" Verification of DKIM signatures in SMTP incoming email is implemented via the @@ -38561,7 +38661,7 @@ Verification of DKIM signatures in SMTP incoming email is implemented via the syntactically(!) correct signature in the incoming message. A missing ACL definition defaults to accept. If any ACL call does not accept, the message is not accepted. -If a cutthrough delivery was in progress for the message it is +If a cutthrough delivery was in progress for the message, that is summarily dropped (having wasted the transmission effort). To evaluate the signature in the ACL a large number of expansion variables @@ -38599,6 +38699,9 @@ dkim_verify_signers = $sender_address_domain:$dkim_signers If a domain or identity is listed several times in the (expanded) value of &%dkim_verify_signers%&, the ACL is only called once for that domain or identity. +If multiple signatures match a domain (or identity), the ACL is called once +for each matching signature. + Inside the &%acl_smtp_dkim%&, the following expansion variables are available (from most to least important): @@ -38611,7 +38714,8 @@ an identity. This is one of the list items from the expanded main option &%dkim_verify_signers%& (see above). .vitem &%$dkim_verify_status%& -A string describing the general status of the signature. One of +Within the DKIM ACL, +a string describing the general status of the signature. One of .ilist &%none%&: There is no signature in the message for the current domain or identity (as reflected by &%$dkim_cur_signer%&). @@ -38625,6 +38729,20 @@ available in &%$dkim_verify_reason%&. &%pass%&: The signature passed verification. It is valid. .endlist +This variable can be overwritten using an ACL 'set' modifier. +This might, for instance, be done to enforce a policy restriction on +hash-method or key-size: +.code + warn condition = ${if eq {$dkim_algo}{rsa-sha1}} + condition = ${if eq {$dkim_verify_status}{pass}} + logwrite = NOTE: forcing dkim verify fail (was pass) + set dkim_verify_status = fail + set dkim_verify_reason = hash too weak +.endd + +After all the DKIM ACL runs have completed, the value becomes a +colon-separated list of the values after each run. + .vitem &%$dkim_verify_reason%& A string giving a little bit more detail when &%$dkim_verify_status%& is either "fail" or "invalid". One of @@ -38645,6 +38763,8 @@ re-written or otherwise changed in a way which is incompatible with DKIM verification. It may of course also mean that the signature is forged. .endlist +This variable can be overwritten using an ACL 'set' modifier. + .vitem &%$dkim_domain%& The signing domain. IMPORTANT: This variable is only populated if there is an actual signature in the message for the current domain or identity (as @@ -38750,6 +38870,178 @@ see the documentation of the &%$dkim_verify_status%& expansion variable above for more information of what they mean. .endlist + + + +.new +.section "SPF (Sender Policy Framework)" SECSPF +.cindex SPF verification + +SPF is a mechanism whereby a domain may assert which IP addresses may transmit +messages with its domain in the envelope from, documented by RFC 7208. +For more information on SPF see &url(http://www.openspf.org). + +Messages sent by a system not authorised will fail checking of such assertions. +This includes retransmissions done by traditional forwarders. + +SPF verification support is built into Exim if SUPPORT_SPF=yes is set in +&_Local/Makefile_&. The support uses the &_libspf2_& library +&url(http://www.libspf2.org/). +There is no Exim involvement on the trasmission of messages; publishing certain +DNS records is all that is required. + +For verification, an ACL condition and an expansion lookup are provided. + +.cindex SPF "ACL condition" +.cindex ACL "spf condition" +The ACL condition "spf" can be used at or after the MAIL ACL. +It takes as an argument a list of strings giving the outcome of the SPF check, +and will succeed for any matching outcome. +Valid strings are: +.vlist +.vitem &%pass%& +The SPF check passed, the sending host is positively verified by SPF. + +.vitem &%fail%& +The SPF check failed, the sending host is NOT allowed to send mail for the +domain in the envelope-from address. + +.vitem &%softfail%& +The SPF check failed, but the queried domain can't absolutely confirm that this +is a forgery. + +.vitem &%none%& +The queried domain does not publish SPF records. + +.vitem &%neutral%& +The SPF check returned a "neutral" state. This means the queried domain has +published a SPF record, but wants to allow outside servers to send mail under +its domain as well. This should be treated like "none". + +.vitem &%permerror%& +This indicates a syntax error in the SPF record of the queried domain. +You may deny messages when this occurs. (Changed in 4.83) + +.vitem &%temperror%& +This indicates a temporary error during all processing, including Exim's +SPF processing. You may defer messages when this occurs. +(Changed in 4.83) + +.vitem &%err_temp%& +Same as permerror, deprecated in 4.83, will be removed in a future release. + +.vitem &%err_perm%& +Same as temperror, deprecated in 4.83, will be removed in a future release. +.endlist + +You can prefix each string with an exclamation mark to invert +its meaning, for example "!fail" will match all results but +"fail". The string list is evaluated left-to-right, in a +short-circuit fashion. + +Example: +.code +deny spf = fail + message = $sender_host_address is not allowed to send mail from \ + ${if def:sender_address_domain \ + {$sender_address_domain}{$sender_helo_name}}. \ + Please see http://www.openspf.org/Why?scope=\ + ${if def:sender_address_domain {mfrom}{helo}};\ + identity=${if def:sender_address_domain \ + {$sender_address}{$sender_helo_name}};\ + ip=$sender_host_address +.endd + +When the spf condition has run, it sets up several expansion +variables: + +.cindex SPF "verification variables" +.vlist +.vitem &$spf_header_comment$& +.vindex &$spf_header_comment$& + This contains a human-readable string describing the outcome + of the SPF check. You can add it to a custom header or use + it for logging purposes. + +.vitem &$spf_received$& +.vindex &$spf_received$& + This contains a complete Received-SPF: header that can be + added to the message. Please note that according to the SPF + draft, this header must be added at the top of the header + list. Please see section 10 on how you can do this. + + Note: in case of "Best-guess" (see below), the convention is + to put this string in a header called X-SPF-Guess: instead. + +.vitem &$spf_result$& +.vindex &$spf_result$& + This contains the outcome of the SPF check in string form, + one of pass, fail, softfail, none, neutral, permerror or + temperror. + +.vitem &$spf_smtp_comment$& +.vindex &$spf_smtp_comment$& + This contains a string that can be used in a SMTP response + to the calling party. Useful for "fail". +.endlist + + +.cindex SPF "ACL condition" +.cindex ACL "spf_guess condition" +.cindex SPF "best guess" +In addition to SPF, you can also perform checks for so-called +"Best-guess". Strictly speaking, "Best-guess" is not standard +SPF, but it is supported by the same framework that enables SPF +capability. +Refer to &url(http://www.openspf.org/FAQ/Best_guess_record) +for a description of what it means. + +To access this feature, simply use the spf_guess condition in place +of the spf one. For example: + +.code +deny spf_guess = fail + message = $sender_host_address doesn't look trustworthy to me +.endd + +In case you decide to reject messages based on this check, you +should note that although it uses the same framework, "Best-guess" +is not SPF, and therefore you should not mention SPF at all in your +reject message. + +When the spf_guess condition has run, it sets up the same expansion +variables as when spf condition is run, described above. + +Additionally, since Best-guess is not standardized, you may redefine +what "Best-guess" means to you by redefining the main configuration +&%spf_guess%& option. +For example, the following: + +.code +spf_guess = v=spf1 a/16 mx/16 ptr ?all +.endd + +would relax host matching rules to a broader network range. + + +.cindex SPF "lookup expansion" +.cindex lookup spf +A lookup expansion is also available. It takes an email +address as the key and an IP address as the database: + +.code + ${lookup {username@domain} spf {ip.ip.ip.ip}} +.endd + +The lookup will return the same result strings as they can appear in +&$spf_result$& (pass,fail,softfail,neutral,none,err_perm,err_temp). +Currently, only IPv4 addresses are supported. + + +. wen-for SPF section +.wen + + . //////////////////////////////////////////////////////////////////////////// . //////////////////////////////////////////////////////////////////////////// @@ -39090,10 +39382,8 @@ The second column in the table above describes whether the event fires before or after the action is associates with. Those which fire before can be used to affect that action (more on this below). -.new The third column in the table above says what section of the configumration should define the event action. -.wen An additional variable, &$event_data$&, is filled with information varying with the event type: