X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/8ebb1c9ea93eb27500756a578640d890b53264d3..8fd715e80d7848fa463f06951a42967bd7123756:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 12d813781..0815c0e4d 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -1647,6 +1647,7 @@ architecture and operating system for itself, but the defaults can be overridden if necessary. +.new .section "PCRE library" "SECTpcre" .cindex "PCRE library" Exim no longer has an embedded PCRE library as the vast majority of @@ -1654,10 +1655,14 @@ modern systems include PCRE as a system library, although you may need to install the PCRE or PCRE development package for your operating system. If your system has a normal PCRE installation the Exim build process will need no further configuration. If the library or the -headers are in an unusual location you will need to set the PCRE_LIBS -and INCLUDE directives appropriately. If your operating system has no +headers are in an unusual location you will need to either set the PCRE_LIBS +and INCLUDE directives appropriately, +or set PCRE_CONFIG=yes to use the installed &(pcre-config)& command. +If your operating system has no PCRE support then you will need to obtain and build the current PCRE from &url(ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/). +More information on PCRE is available at &url(http://www.pcre.org/). +.wen .section "DBM libraries" "SECTdb" .cindex "DBM libraries" "discussion of" @@ -1868,6 +1873,14 @@ SUPPORT_TLS=yes TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto TLS_INCLUDE=-I/usr/local/openssl/include/ .endd +.new +.cindex "pkg-config" "OpenSSL" +If you have &'pkg-config'& available, then instead you can just use: +.code +SUPPORT_TLS=yes +USE_OPENSSL_PC=openssl +.endd +.wen .cindex "USE_GNUTLS" If GnuTLS is installed, you should set .code @@ -1883,6 +1896,16 @@ USE_GNUTLS=yes TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt TLS_INCLUDE=-I/usr/gnu/include .endd +.new +.cindex "pkg-config" "GnuTLS" +If you have &'pkg-config'& available, then instead you can just use: +.code +SUPPORT_TLS=yes +USE_GNUTLS=yes +USE_GNUTLS_PC=gnutls +.endd +.wen + You do not need to set TLS_INCLUDE if the relevant directory is already specified in INCLUDE. Details of how to configure Exim to make use of TLS are given in chapter &<>&. @@ -2110,6 +2133,28 @@ files or libraries are required. When a lookup type is not included in the binary, attempts to configure Exim to use it cause run time configuration errors. +.new +.cindex "pkg-config" "lookups" +.cindex "pkg-config" "authenticators" +Many systems now use a tool called &'pkg-config'& to encapsulate information +about how to compile against a library; Exim has some initial support for +being able to use pkg-config for lookups and authenticators. For any given +makefile variable which starts &`LOOKUP_`& or &`AUTH_`&, you can add a new +variable with the &`_PC`& suffix in the name and assign as the value the +name of the package to be queried. The results of querying via the +&'pkg-config'& command will be added to the appropriate Makefile variables +with &`+=`& directives, so your version of &'make'& will need to support that +syntax. For instance: +.code +LOOKUP_SQLITE=yes +LOOKUP_SQLITE_PC=sqlite3 +AUTH_GSASL=yes +AUTH_GSASL_PC=libgsasl +AUTH_HEIMDAL_GSSAPI=yes +AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi +.endd +.wen + .cindex "Perl" "including support for" Exim can be linked with an embedded Perl interpreter, allowing Perl subroutines to be called during string expansion. To enable this facility, @@ -3346,6 +3391,23 @@ This option acts like &%-bv%&, but verifies the address as a sender rather than a recipient address. This affects any rewriting and qualification that might happen. +.vitem &%-bw%& +.oindex "&%-bw%&" +.cindex "daemon" +.cindex "inetd" +.cindex "inetd" "wait mode" +This option runs Exim as a daemon, awaiting incoming SMTP connections, +similarly to the &%-bd%& option. All port specifications on the command-line +and in the configuration file are ignored. Queue-running may not be specified. + +In this mode, Exim expects to be passed a socket as fd 0 (stdin) which is +listening for connections. This permits the system to start up and have +inetd (or equivalent) listen on the SMTP ports, starting an Exim daemon for +each port only when the first connection is received. + +If the option is given as &%-bw%&<&'time'&> then the time is a timeout, after +which the daemon will exit, which should cause inetd to listen once more. + .vitem &%-C%&&~<&'filelist'&> .oindex "&%-C%&" .cindex "configuration file" "alternate" @@ -6183,13 +6245,26 @@ using Berkeley DB versions 3 or 4, it opens existing databases for reading with the DB_UNKNOWN option. This enables it to handle any of the types of database that the library supports, and can be useful for accessing DBM files created by other applications. (For earlier DB versions, DB_HASH is always used.) +.new +.next +.cindex "lookup" "dbmjz" +.cindex "lookup" "dbm &-- embedded NULs" +.cindex "sasldb2" +.cindex "dbmjz lookup type" +&(dbmjz)&: This is the same as &(dbm)&, except that the lookup key is +interpreted as an Exim list; the elements of the list are joined together with +ASCII NUL characters to form the lookup key. An example usage would be to +authenticate incoming SMTP calls using the passwords from Cyrus SASL's +&_/etc/sasldb2_& file with the &(gsasl)& authenticator or Exim's own +&(cram_md5)& authenticator. +.wen .next .cindex "lookup" "dbmnz" .cindex "lookup" "dbm &-- terminating zero" .cindex "binary zero" "in lookup key" .cindex "Courier" .cindex "&_/etc/userdbshadow.dat_&" -.cindex "dmbnz lookup type" +.cindex "dbmnz lookup type" &(dbmnz)&: This is the same as &(dbm)&, except that a terminating binary zero is not included in the key that is passed to the DBM library. You may need this if you want to look up data in files that are created by or shared with some @@ -8483,6 +8558,13 @@ start of a portion of the string that is interpreted and replaced as described below in section &<>& onwards. Backslash is used as an escape character, as described in the following section. +Whether a string is expanded depends upon the context. Usually this is solely +dependent upon the option for which a value is sought; in this documentation, +options for which string expansion is performed are marked with † after +the data type. ACL rules always expand strings. A couple of expansion +conditions do not expand some of the brace-delimited branches, for security +reasons. + .section "Literal text in expanded strings" "SECTlittext" @@ -9462,9 +9544,10 @@ decimal, even if they start with a leading zero; hexadecimal numbers are not permitted. This can be useful when processing numbers extracted from dates or times, which often do have leading zeros. -A number may be followed by &"K"& or &"M"& to multiply it by 1024 or 1024*1024, +A number may be followed by &"K"&, &"M"& or &"G"& to multiply it by 1024, 1024*1024 +or 1024*1024*1024, respectively. Negative numbers are supported. The result of the computation is -a decimal representation of the answer (without &"K"& or &"M"&). For example: +a decimal representation of the answer (without &"K"&, &"M"& or &"G"&). For example: .display &`${eval:1+1} `& yields 2 @@ -9695,11 +9778,13 @@ dotted-quad decimal form, while for IPv6 addreses the result is in dotted-nibble hexadecimal form. In both cases, this is the "natural" form for DNS. For example, .code -${reverse_ip:192.0.2.4} and ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3} +${reverse_ip:192.0.2.4} +${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3} .endd returns .code -4.2.0.192 and 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2 +4.2.0.192 +3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2 .endd @@ -9864,6 +9949,10 @@ lower case), signifying multiplication by 1024 or 1024*1024, respectively. As a special case, the numerical value of an empty string is taken as zero. +In all cases, a relative comparator OP is testing if <&'string1'&> OP +<&'string2'&>; the above example is checking if &$message_size$& is larger than +10M, not if 10M is larger than &$message_size$&. + .vitem &*bool&~{*&<&'string'&>&*}*& .cindex "expansion" "boolean parsing" @@ -11784,6 +11873,16 @@ command in a filter file. Its use is explained in the description of that command, which can be found in the separate document entitled &'Exim's interfaces to mail filtering'&. +.new +.vitem &$tls_bits$& +.vindex "&$tls_bits$&" +Contains an approximation of the TLS cipher's bit-strength; the meaning of +this depends upon the TLS implementation used. +If TLS has not been negotiated, the value will be 0. +The value of this is automatically fed into the Cyrus SASL authenticator +when acting as a server, to specify the "external SSF" (a SASL term). +.wen + .vitem &$tls_certificate_verified$& .vindex "&$tls_certificate_verified$&" This variable is set to &"1"& if a TLS certificate was verified when the @@ -11814,6 +11913,26 @@ the value of the Distinguished Name of the certificate is made available in the value is retained during message delivery, except during outbound SMTP deliveries. +.new +.vitem &$tls_sni$& +.vindex "&$tls_sni$&" +.cindex "TLS" "Server Name Indication" +When a TLS session is being established, if the client sends the Server +Name Indication extension, the value will be placed in this variable. +If the variable appears in &%tls_certificate%& then this option and +some others, described in &<>&, +will be re-expanded early in the TLS session, to permit +a different certificate to be presented (and optionally a different key to be +used) to the client, based upon the value of the SNI extension. + +The value will be retained for the lifetime of the message. During outbound +SMTP deliveries, it reflects the value of the &%tls_sni%& option on +the transport. + +This is currently only available when using OpenSSL, built with support for +SNI. +.wen + .vitem &$tod_bsdinbox$& .vindex "&$tod_bsdinbox$&" The time of day and the date, in the format required for BSD-style mailbox @@ -12754,14 +12873,23 @@ See also the &'Policy controls'& section above. Those options that undergo string expansion before use are marked with †. -.option accept_8bitmime main boolean false +.new +.option accept_8bitmime main boolean true .cindex "8BITMIME" .cindex "8-bit characters" This option causes Exim to send 8BITMIME in its response to an SMTP EHLO command, and to accept the BODY= parameter on MAIL commands. However, though Exim is 8-bit clean, it is not a protocol converter, and it takes no steps to do anything special with messages received by this route. -Consequently, this option is turned off by default. + +Historically Exim kept this option off by default, but the maintainers +feel that in today's Internet, this causes more problems than it solves. +It now defaults to true. +A more detailed analysis of the issues is provided by Dan Bernstein: +.display +&url(http://cr.yp.to/smtp/8bitmime.html) +.endd +.wen .option acl_not_smtp main string&!! unset .cindex "&ACL;" "for non-SMTP messages" @@ -14259,16 +14387,12 @@ harm. This option overrides the &%pipe_as_creator%& option of the &(pipe)& transport driver. -.option openssl_options main "string list" +dont_insert_empty_fragments +.option openssl_options main "string list" unset .cindex "OpenSSL "compatibility options" This option allows an administrator to adjust the SSL options applied by OpenSSL to connections. It is given as a space-separated list of items, -each one to be +added or -subtracted from the current value. The default -value is one option which happens to have been set historically. You can -remove all options with: -.code -openssl_options = -all -.endd +each one to be +added or -subtracted from the current value. + This option is only available if Exim is built against OpenSSL. The values available for this option vary according to the age of your OpenSSL install. The &"all"& value controls a subset of flags which are available, typically @@ -14280,14 +14404,78 @@ names lose the leading &"SSL_OP_"& and are lower-cased. Note that adjusting the options can have severe impact upon the security of SSL as used by Exim. It is possible to disable safety checks and shoot yourself in the foot in various unpleasant ways. This option should not be -adjusted lightly. An unrecognised item will be detected at by invoking Exim -with the &%-bV%& flag. +adjusted lightly. An unrecognised item will be detected at startup, by +invoking Exim with the &%-bV%& flag. + +.new +Historical note: prior to release 4.78, Exim defaulted this value to +"+dont_insert_empty_fragments", which may still be needed for compatibility +with some clients, but which lowers security by increasing exposure to +some now infamous attacks. +.wen An example: .code -openssl_options = -all +microsoft_big_sslv3_buffer +# Make both old MS and old Eudora happy: +openssl_options = -all +microsoft_big_sslv3_buffer \ + +dont_insert_empty_fragments .endd +Possible options may include: +.ilist +&`all`& +.next +&`allow_unsafe_legacy_renegotiation`& +.next +&`cipher_server_preference`& +.next +&`dont_insert_empty_fragments`& +.next +&`ephemeral_rsa`& +.next +&`legacy_server_connect`& +.next +&`microsoft_big_sslv3_buffer`& +.next +&`microsoft_sess_id_bug`& +.next +&`msie_sslv2_rsa_padding`& +.next +&`netscape_challenge_bug`& +.next +&`netscape_reuse_cipher_change_bug`& +.next +&`no_compression`& +.next +&`no_session_resumption_on_renegotiation`& +.next +&`no_sslv2`& +.next +&`no_sslv3`& +.next +&`no_ticket`& +.next +&`no_tlsv1`& +.next +&`no_tlsv1_1`& +.next +&`no_tlsv1_2`& +.next +&`single_dh_use`& +.next +&`single_ecdh_use`& +.next +&`ssleay_080_client_dh_bug`& +.next +&`sslref2_reuse_cert_type_bug`& +.next +&`tls_block_padding_bug`& +.next +&`tls_d5_bug`& +.next +&`tls_rollback_bug`& +.endlist + .option oracle_servers main "string list" unset .cindex "Oracle" "server list" @@ -15477,6 +15665,12 @@ receiving incoming messages as a server. If you want to supply certificates for use when sending messages as a client, you must set the &%tls_certificate%& option in the relevant &(smtp)& transport. +.new +If the option contains &$tls_sni$& and Exim is built against OpenSSL, then +if the OpenSSL build supports TLS extensions and the TLS client sends the +Server Name Indication extension, then this option and others documented in +&<>& will be re-expanded. +.wen .option tls_crl main string&!! unset .cindex "TLS" "server certificate revocation list" @@ -15484,6 +15678,10 @@ option in the relevant &(smtp)& transport. This option specifies a certificate revocation list. The expanded value must be the name of a file that contains a CRL in PEM format. +.new +See &<>& for discussion of when this option might be re-expanded. +.wen + .option tls_dhparam main string&!! unset .cindex "TLS" "D-H parameters for server" @@ -15509,6 +15707,10 @@ the expansion is forced to fail, or the result is an empty string, the private key is assumed to be in the same file as the server's certificates. See chapter &<>& for further details. +.new +See &<>& for discussion of when this option might be re-expanded. +.wen + .option tls_remember_esmtp main boolean false .cindex "TLS" "esmtp state; remembering" @@ -15555,6 +15757,10 @@ connecting clients, defining the list of accepted certificate authorities. Thus the values defined should be considered public data. To avoid this, use OpenSSL with a directory. +.new +See &<>& for discussion of when this option might be re-expanded. +.wen + .option tls_verify_hosts main "host list&!!" unset .cindex "TLS" "client certificate verification" @@ -21637,12 +21843,15 @@ that are in force when the &%helo_data%&, &%hosts_try_auth%&, &%interface%&, .section "Use of $tls_cipher and $tls_peerdn" "usecippeer" +.vindex &$tls_bits$& .vindex &$tls_cipher$& .vindex &$tls_peerdn$& -At the start of a run of the &(smtp)& transport, the values of &$tls_cipher$& -and &$tls_peerdn$& are the values that were set when the message was received. +.vindex &$tls_sni$& +At the start of a run of the &(smtp)& transport, the values of &$tls_bits$&, +&$tls_cipher$&, &$tls_peerdn$& and &$tls_sni$& +are the values that were set when the message was received. These are the values that are used for options that are expanded before any -SMTP connections are made. Just before each connection is made, these two +SMTP connections are made. Just before each connection is made, these four variables are emptied. If TLS is subsequently started, they are set to the appropriate values for the outgoing connection, and these are the values that are in force when any authenticators are run and when the @@ -22221,6 +22430,22 @@ ciphers is a preference order. +.new +.option tls_sni smtp string&!! unset +.cindex "TLS" "Server Name Indication" +.vindex "&$tls_sni$&" +If this option is set then it sets the $tls_sni variable and causes any +TLS session to pass this value as the Server Name Indication extension to +the remote side, which can be used by the remote side to select an appropriate +certificate and private key for the session. + +See &<>& for more information. + +OpenSSL only, also requiring a build of OpenSSL that supports TLS extensions. +.wen + + + .option tls_tempfail_tryclear smtp boolean true .cindex "4&'xx'& responses" "to STARTTLS" When the server host is not in &%hosts_require_tls%&, and there is a problem in @@ -23396,15 +23621,29 @@ included by setting .code AUTH_CRAM_MD5=yes AUTH_CYRUS_SASL=yes +.new +AUTH_DOVECOT=yes +AUTH_GSASL=yes +AUTH_HEIMDAL_GSSAPI=yes +.wen AUTH_PLAINTEXT=yes AUTH_SPA=yes .endd in &_Local/Makefile_&, respectively. The first of these supports the CRAM-MD5 authentication mechanism (RFC 2195), and the second provides an interface to -the Cyrus SASL authentication library. The third can be configured to support +the Cyrus SASL authentication library. +.new +The third is an interface to Dovecot's authentication system, delegating the +work via a socket interface. +The fourth provides an interface to the GNU SASL authentication library, which +provides mechanisms but typically not data sources. +The fifth provides direct access to Heimdal GSSAPI, geared for Kerberos, but +supporting setting a server keytab. +The sixth can be configured to support the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is -not formally documented, but used by several MUAs. The fourth authenticator +not formally documented, but used by several MUAs. The seventh authenticator supports Microsoft's &'Secure Password Authentication'& mechanism. +.wen The authenticators are configured using the same syntax as other drivers (see section &<>&). If no authenticators are required, no @@ -23436,6 +23675,30 @@ The remainder of this chapter covers the generic options for the authenticators, followed by general discussion of the way authentication works in Exim. +.new +&*Beware:*& the meaning of &$auth1$&, &$auth2$&, ... varies on a per-driver and +per-mechanism basis. Please read carefully to determine which variables hold +account labels such as usercodes and which hold passwords or other +authenticating data. + +Note that some mechanisms support two different identifiers for accounts: the +&'authentication id'& and the &'authorization id'&. The contractions &'authn'& +and &'authz'& are commonly encountered. The American spelling is standard here. +Conceptually, authentication data such as passwords are tied to the identifier +used to authenticate; servers may have rules to permit one user to act as a +second user, so that after login the session is treated as though that second +user had logged in. That second user is the &'authorization id'&. A robust +configuration might confirm that the &'authz'& field is empty or matches the +&'authn'& field. Often this is just ignored. The &'authn'& can be considered +as verified data, the &'authz'& as an unverified request which the server might +choose to honour. + +A &'realm'& is a text string, typically a domain name, presented by a server +to a client to help it select an account and credentials to use. In some +mechanisms, the client and server provably agree on the realm, but clients +typically can not treat the realm as secure data to be blindly trusted. +.wen + .section "Generic options for authenticators" "SECID168" @@ -23482,6 +23745,11 @@ This option must be set for a &%plaintext%& server authenticator, where it is used directly to control authentication. See section &<>& for details. +.new +For the &(gsasl)& authenticator, this option is required for various +mechanisms; see chapter &<>& for details. +.wen + For the other authenticators, &%server_condition%& can be used as an additional authentication or authorization mechanism that is applied after the other authenticator conditions succeed. If it is set, it is expanded when the @@ -23942,9 +24210,10 @@ login: server_prompts = Username:: : Password:: server_condition = ${if and{{ \ !eq{}{$auth1} }{ \ - ldapauth{user="cn=${quote_ldap_dn:$auth1},ou=people,o=example.org" \ - pass=${quote:$auth2} \ - ldap://ldap.example.org/} }} } + ldapauth{\ + user="uid=${quote_ldap_dn:$auth1},ou=people,o=example.org" \ + pass=${quote:$auth2} \ + ldap://ldap.example.org/} }} } server_set_id = uid=$auth1,ou=people,o=example.org .endd We have to check that the username is not empty before using it, because LDAP @@ -24086,6 +24355,20 @@ lookup_cram: Note that this expansion explicitly forces failure if the lookup fails because &$auth1$& contains an unknown user name. +.new +As another example, if you wish to re-use a Cyrus SASL sasldb2 file without +using the relevant libraries, you need to know the realm to specify in the +lookup and then ask for the &"userPassword"& attribute for that user in that +realm, with: +.code +cyrusless_crammd5: + driver = cram_md5 + public_name = CRAM-MD5 + server_secret = ${lookup{$auth1:mail.example.org:userPassword}\ + dbmjz{/etc/sasldb2}} + server_set_id = $auth1 +.endd +.wen .section "Using cram_md5 as a client" "SECID177" .cindex "options" "&(cram_md5)& authenticator (client)" @@ -24159,10 +24442,17 @@ be set in &_exim.conf_& in your SASL directory. If you are using GSSAPI for Kerberos, note that because of limitations in the GSSAPI interface, changing the server keytab might need to be communicated down to the Kerberos layer independently. The mechanism for doing so is dependent upon the Kerberos -implementation. For example, for Heimdal, the environment variable KRB5_KTNAME +implementation. +.new +For example, for older releases of Heimdal, the environment variable KRB5_KTNAME may be set to point to an alternative keytab file. Exim will pass this variable through from its own inherited environment when started as root or the Exim user. The keytab file needs to be readable by the Exim user. +With newer releases of Heimdal, a setuid Exim may cause Heimdal to discard the +environment variable. In practice, for those releases, the Cyrus authenticator +is not a suitable interface for GSSAPI (Kerberos) support. Instead, consider +the &(heimdal_gssapi)& authenticator, described in chapter &<>& +.wen .section "Using cyrus_sasl as a server" "SECID178" @@ -24193,8 +24483,10 @@ sasl: server_set_id = $auth1 .endd -.option server_realm cyrus_sasl string unset +.new +.option server_realm cyrus_sasl string&!! unset This specifies the SASL realm that the server claims to be in. +.wen .option server_service cyrus_sasl string &`smtp`& @@ -24265,6 +24557,217 @@ who authenticated is placed in &$auth1$&. .ecindex IIDdcotauth2 +. //////////////////////////////////////////////////////////////////////////// +. //////////////////////////////////////////////////////////////////////////// +.new +.chapter "The gsasl authenticator" "CHAPgsasl" +.scindex IIDgsaslauth1 "&(gsasl)& authenticator" +.scindex IIDgsaslauth2 "authenticators" "&(gsasl)&" +.cindex "authentication" "GNU SASL" +.cindex "authentication" "SASL" +.cindex "authentication" "EXTERNAL" +.cindex "authentication" "ANONYMOUS" +.cindex "authentication" "PLAIN" +.cindex "authentication" "LOGIN" +.cindex "authentication" "DIGEST-MD5" +.cindex "authentication" "CRAM-MD5" +.cindex "authentication" "SCRAM-SHA-1" +The &(gsasl)& authenticator provides server integration for the GNU SASL +library and the mechanisms it provides. This is new as of the 4.78 release +and there are a few areas where the library does not let Exim smoothly +scale to handle future authentication mechanisms, so no guarantee can be +made that any particular new authentication mechanism will be supported +without code changes in Exim. + + +.option server_channelbinding gsasl bool false +Some authentication mechanisms are able to use external context at both ends +of the session to bind the authentication to that context, and fail the +authentication process if that context differs. Specifically, some TLS +ciphersuites can provide identifying information about the cryptographic +context. + +This means that certificate identity and verification becomes a non-issue, +as a man-in-the-middle attack will cause the correct client and server to +see different identifiers and authentication will fail. + +This is currently only supported when using the GnuTLS library. This is +only usable by mechanisms which support "channel binding"; at time of +writing, that's the SCRAM family. + +This defaults off to ensure smooth upgrade across Exim releases, in case +this option causes some clients to start failing. Some future release +of Exim may switch the default to be true. + + +.option server_hostname gsasl string&!! "see below" +This option selects the hostname that is used when communicating with the +library. The default value is &`$primary_hostname`&. +Some mechanisms will use this data. + + +.option server_mech gsasl string "see below" +This option selects the authentication mechanism this driver should use. The +default is the value of the generic &%public_name%& option. This option allows +you to use a different underlying mechanism from the advertised name. For +example: +.code +sasl: + driver = gsasl + public_name = X-ANYTHING + server_mech = CRAM-MD5 + server_set_id = $auth1 +.endd + + +.option server_password gsasl string&!! unset +Various mechanisms need access to the cleartext password on the server, so +that proof-of-possession can be demonstrated on the wire, without sending +the password itself. + +The data available for lookup varies per mechanism. +In all cases, &$auth1$& is set to the &'authentication id'&. +The &$auth2$& variable will always be the &'authorization id'& (&'authz'&) +if available, else the empty string. +The &$auth3$& variable will always be the &'realm'& if available, +else the empty string. + +A forced failure will cause authentication to defer. + +If using this option, it may make sense to set the &%server_condition%& +option to be simply "true". + + +.option server_realm gsasl string&!! unset +This specifies the SASL realm that the server claims to be in. +Some mechanisms will use this data. + + +.option server_scram_iter gsasl string&!! unset +This option provides data for the SCRAM family of mechanisms. +&$auth1$& is not available at evaluation time. +(This may change, as we receive feedback on use) + + +.option server_scram_salt gsasl string&!! unset +This option provides data for the SCRAM family of mechanisms. +&$auth1$& is not available at evaluation time. +(This may change, as we receive feedback on use) + + +.option server_service gsasl string &`smtp`& +This is the SASL service that the server claims to implement. +Some mechanisms will use this data. + + +.section "&(gsasl)& auth variables" "SECTgsaslauthvar" +.vindex "&$auth1$&, &$auth2$&, etc" +These may be set when evaluating specific options, as detailed above. +They will also be set when evaluating &%server_condition%&. + +Unless otherwise stated below, the &(gsasl)& integration will use the following +meanings for these variables: + +.ilist +.vindex "&$auth1$&" +&$auth1$&: the &'authentication id'& +.next +.vindex "&$auth2$&" +&$auth2$&: the &'authorization id'& +.next +.vindex "&$auth3$&" +&$auth3$&: the &'realm'& +.endlist + +On a per-mechanism basis: + +.ilist +.cindex "authentication" "EXTERNAL" +EXTERNAL: only &$auth1$& is set, to the possibly empty &'authorization id'&; +the &%server_condition%& option must be present. +.next +.cindex "authentication" "ANONYMOUS" +ANONYMOUS: only &$auth1$& is set, to the possibly empty &'anonymous token'&; +the &%server_condition%& option must be present. +.next +.cindex "authentication" "GSSAPI" +GSSAPI: &$auth1$& will be set to the &'GSSAPI Display Name'&; +&$auth2$& will be set to the &'authorization id'&, +the &%server_condition%& option must be present. +.endlist + +An &'anonymous token'& is something passed along as an unauthenticated +identifier; this is analogous to FTP anonymous authentication passing an +email address, or software-identifier@, as the "password". + + +An example showing the password having the realm specified in the callback +and demonstrating a Cyrus SASL to GSASL migration approach is: +.code +gsasl_cyrusless_crammd5: + driver = gsasl + public_name = CRAM-MD5 + server_realm = imap.example.org + server_password = ${lookup{$auth1:$auth3:userPassword}\ + dbmjz{/etc/sasldb2}{$value}fail} + server_set_id = ${quote:$auth1} + server_condition = yes +.endd + +.wen + +. //////////////////////////////////////////////////////////////////////////// +. //////////////////////////////////////////////////////////////////////////// + +.new +.chapter "The heimdal_gssapi authenticator" "CHAPheimdalgss" +.scindex IIDheimdalgssauth1 "&(heimdal_gssapi)& authenticator" +.scindex IIDheimdalgssauth2 "authenticators" "&(heimdal_gssapi)&" +.cindex "authentication" "GSSAPI" +.cindex "authentication" "Kerberos" +The &(heimdal_gssapi)& authenticator provides server integration for the +Heimdal GSSAPI/Kerberos library, permitting Exim to set a keytab pathname +reliably. + +.option server_hostname heimdal_gssapi string&!! "see below" +This option selects the hostname that is used, with &%server_service%&, +for constructing the GSS server name, as a &'GSS_C_NT_HOSTBASED_SERVICE'& +identifier. The default value is &`$primary_hostname`&. + +.option server_keytab heimdal_gssapi string&!! unset +If set, then Heimdal will not use the system default keytab (typically +&_/etc/krb5.keytab_&) but instead the pathname given in this option. +The value should be a pathname, with no &"file:"& prefix. + +.option server_service heimdal_gssapi string&!! "smtp" +This option specifies the service identifier used, in conjunction with +&%server_hostname%&, for building the identifer for finding credentials +from the keytab. + + +.section "&(heimdal_gssapi)& auth variables" "SECTheimdalgssauthvar" +Beware that these variables will typically include a realm, thus will appear +to be roughly like an email address already. The &'authzid'& in &$auth2$& is +not verified, so a malicious client can set it to anything. + +The &$auth1$& field should be safely trustable as a value from the Key +Distribution Center. Note that these are not quite email addresses. +Each identifier is for a role, and so the left-hand-side may include a +role suffix. For instance, &"joe/admin@EXAMPLE.ORG"&. + +.vindex "&$auth1$&, &$auth2$&, etc" +.ilist +.vindex "&$auth1$&" +&$auth1$&: the &'authentication id'&, set to the GSS Display Name. +.next +.vindex "&$auth2$&" +&$auth2$&: the &'authorization id'&, sent within SASL encapsulation after +authentication. If that was empty, this will also be set to the +GSS Display Name. +.endlist + +.wen + . //////////////////////////////////////////////////////////////////////////// . //////////////////////////////////////////////////////////////////////////// @@ -24468,6 +24971,13 @@ option). .next The &%tls_require_ciphers%& options operate differently, as described in the sections &<>& and &<>&. +.new +.next +Some other recently added features may only be available in one or the other. +This should be documented with the feature. If the documentation does not +explicitly state that the feature is infeasible in the other TLS +implementation, then patches are welcome. +.wen .endlist @@ -24864,9 +25374,12 @@ All the TLS options in the &(smtp)& transport are expanded before use, with which the client is connected. Forced failure of an expansion causes Exim to behave as if the relevant option were unset. +.vindex &$tls_bits$& .vindex &$tls_cipher$& .vindex &$tls_peerdn$& -Before an SMTP connection is established, the &$tls_cipher$& and &$tls_peerdn$& +.vindex &$tls_sni$& +Before an SMTP connection is established, the +&$tls_bits$&, &$tls_cipher$&, &$tls_peerdn$& and &$tls_sni$& variables are emptied. (Until the first connection, they contain the values that were set when the message was received.) If STARTTLS is subsequently successfully obeyed, these variables are set to the relevant values for the @@ -24874,6 +25387,76 @@ outgoing connection. +.new +.section "Use of TLS Server Name Indication" "SECTtlssni" +.cindex "TLS" "Server Name Indication" +.vindex "&$tls_sni$&" +.oindex "&%tls_sni%&" +With TLS1.0 or above, there is an extension mechanism by which extra +information can be included at various points in the protocol. One of these +extensions, documented in RFC 6066 (and before that RFC 4366) is +&"Server Name Indication"&, commonly &"SNI"&. This extension is sent by the +client in the initial handshake, so that the server can examine the servername +within and possibly choose to use different certificates and keys (and more) +for this session. + +This is analagous to HTTP's &"Host:"& header, and is the main mechanism by +which HTTPS-enabled web-sites can be virtual-hosted, many sites to one IP +address. + +With SMTP to MX, there are the same problems here as in choosing the identity +against which to validate a certificate: you can't rely on insecure DNS to +provide the identity which you then cryptographically verify. So this will +be of limited use in that environment. + +With SMTP to Submission, there is a well-defined hostname which clients are +connecting to and can validate certificates against. Thus clients &*can*& +choose to include this information in the TLS negotiation. If this becomes +wide-spread, then hosters can choose to present different certificates to +different clients. Or even negotiate different cipher suites. + +The &%tls_sni%& option on an SMTP transport is an expanded string; the result, +if not empty, will be sent on a TLS session as part of the handshake. There's +nothing more to it. Choosing a sensible value not derived insecurely is the +only point of caution. The &$tls_sni$& variable will be set to this string +for the lifetime of the client connection (including during authentication). + +Except during SMTP client sessions, if &$tls_sni$& is set then it is a string +received from a client. +It can be logged with the &%log_selector%& item &`+tls_sni`&. + +If the string &`tls_sni`& appears in the main section's &%tls_certificate%& +option (prior to expansion) then the following options will be re-expanded +during TLS session handshake, to permit alternative values to be chosen: + +.ilist +.vindex "&%tls_certificate%&" +&%tls_certificate%& +.next +.vindex "&%tls_crl%&" +&%tls_crl%& +.next +.vindex "&%tls_privatekey%&" +&%tls_privatekey%& +.next +.vindex "&%tls_verify_certificates%&" +&%tls_verify_certificates%& +.endlist + +Great care should be taken to deal with matters of case, various injection +attacks in the string (&`../`& or SQL), and ensuring that a valid filename +can always be referenced; it is important to remember that &$tls_sni$& is +arbitrary unverified data provided prior to authentication. + +The Exim developers are proceeding cautiously and so far no other TLS options +are re-expanded. + +Currently SNI support is only available if using OpenSSL, with TLS Extensions +support enabled therein. +.wen + + + .section "Multiple messages on the same encrypted TCP/IP connection" &&& "SECTmulmessam" .cindex "multiple SMTP deliveries with TLS" @@ -27369,14 +27952,14 @@ in the MAIL ACL. Subsequent connections from the same client will check this new rate. .code acl_check_connect: - deny ratelimit = 100 / 5m / readonly - log_message = RATE CHECK: $sender_rate/$sender_rate_period \ - (max $sender_rate_limit) + deny ratelimit = 100 / 5m / readonly + log_message = RATE CHECK: $sender_rate/$sender_rate_period \ + (max $sender_rate_limit) # ... acl_check_mail: - warn ratelimit = 100 / 5m / strict - log_message = RATE UPDATE: $sender_rate/$sender_rate_period \ - (max $sender_rate_limit) + warn ratelimit = 100 / 5m / strict + log_message = RATE UPDATE: $sender_rate/$sender_rate_period \ + (max $sender_rate_limit) .endd If Exim encounters multiple &%ratelimit%& conditions with the same key when @@ -32728,6 +33311,7 @@ selection marked by asterisks: &` tls_certificate_verified `& certificate verification status &`*tls_cipher `& TLS cipher suite on <= and => lines &` tls_peerdn `& TLS peer DN on <= and => lines +&` tls_sni `& TLS SNI on <= lines &` unknown_in_list `& DNS lookup failed in list match &` all `& all of the above @@ -33023,6 +33607,12 @@ connection, the cipher suite used is added to the log line, preceded by X=. connection, and a certificate is supplied by the remote host, the peer DN is added to the log line, preceded by DN=. .next +.cindex "log" "TLS SNI" +.cindex "TLS" "logging SNI" +&%tls_sni%&: When a message is received over an encrypted connection, and +the remote host provided the Server Name Indication extension, the SNI is +added to the log line, preceded by SNI=. +.next .cindex "log" "DNS failure in list" &%unknown_in_list%&: This setting causes a log entry to be written when the result of a list match is failure because a DNS lookup failed. @@ -33813,6 +34403,12 @@ End In order to see the contents of messages on the queue, and to operate on them, &'eximon'& must either be run as root or by an admin user. +The command-line parameters of &'eximon'& are passed to &_eximon.bin_& and may +contain X11 resource parameters interpreted by the X11 library. In addition, +if the first parameter starts with the string "gdb" then it is removed and the +binary is invoked under gdb (the parameter is used as the gdb command-name, so +versioned variants of gdb can be invoked). + The monitor's window is divided into three parts. The first contains one or more stripcharts and two action buttons, the second contains a &"tail"& of the main log file, and the third is a display of the queue of messages awaiting @@ -34827,10 +35423,15 @@ unqualified domain &'foundation'&. . //////////////////////////////////////////////////////////////////////////// . //////////////////////////////////////////////////////////////////////////// -.chapter "Support for DKIM (DomainKeys Identified Mail) - RFC4871" "CHID12" &&& +.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHID12" &&& "DKIM Support" .cindex "DKIM" +DKIM is a mechanism by which messages sent by some entity can be provably +linked to a domain which that entity controls. It permits reputation to +be tracked on a per-domain basis, rather than merely upon source IP address. +DKIM is documented in RFC 4871. + Since version 4.70, DKIM support is compiled into Exim by default. It can be disabled by setting DISABLE_DKIM=yes in Local/Makefile. @@ -34851,9 +35452,12 @@ Exim's standard controls. Please note that verification of DKIM signatures in incoming mail is turned on by default for logging purposes. For each signature in incoming email, exim will log a line displaying the most important signature details, and the -signature status. Here is an example: +signature status. Here is an example (with line-breaks added for clarity): .code -2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM: d=facebookmail.com s=q1-2009b c=relaxed/relaxed a=rsa-sha1 i=@facebookmail.com t=1252484542 [verification succeeded] +2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM: + d=facebookmail.com s=q1-2009b + c=relaxed/relaxed a=rsa-sha1 + i=@facebookmail.com t=1252484542 [verification succeeded] .endd You might want to turn off DKIM verification processing entirely for internal or relay mail sources. To do that, set the &%dkim_disable_verify%& ACL @@ -35061,7 +35665,7 @@ for a match against the domain or identity that the ACL is currently verifying verb to a group of domains or identities. For example: .code -# Warn when message apparently from GMail has no signature at all +# Warn when Mail purportedly from GMail has no signature at all warn log_message = GMail sender without DKIM signature sender_domains = gmail.com dkim_signers = gmail.com @@ -35071,10 +35675,10 @@ warn log_message = GMail sender without DKIM signature .vitem &%dkim_status%& ACL condition that checks a colon-separated list of possible DKIM verification results agains the actual result of verification. This is typically used -to restrict an ACL verb to a list of verification outcomes, like: +to restrict an ACL verb to a list of verification outcomes, for example: .code -deny message = Message from Paypal with invalid or missing signature +deny message = Mail from Paypal with invalid/missing signature sender_domains = paypal.com:paypal.de dkim_signers = paypal.com:paypal.de dkim_status = none:invalid:fail