X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/8d042305ef14df8cabcf7ae33767d019741dd59f..0cd5fd23fdc042cd634a1033350bf91689f26d3c:/doc/doc-docbook/spec.xfpt?ds=sidebyside

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 33c8e5e2b..50ce06e08 100644
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -3049,7 +3049,8 @@ trusted user for the sender of a message to be set in this way.
 .oindex "&%-bmalware%&"
 .cindex "testing", "malware"
 .cindex "malware scan test"
-This debugging option causes Exim to scan the given file,
+This debugging option causes Exim to scan the given file or directory
+(depending on the used scanner interface),
 using the malware scanning framework.  The option of &%av_scanner%& influences
 this option, so if &%av_scanner%&'s value is dependent upon an expansion then
 the expansion should have defaults which apply to this invocation.  ACLs are
@@ -3824,6 +3825,14 @@ This option is not intended for use by external callers. It is used internally
 by Exim in conjunction with the &%-MC%& option. It signifies that the
 remote host supports the ESMTP &_DSN_& extension.
 
+.new
+.vitem &%-MCG%&
+.oindex "&%-MCG%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that an
+alternate queue is used, named by the following option.
+.wen
+
 .vitem &%-MCP%&
 .oindex "&%-MCP%&"
 This option is not intended for use by external callers. It is used internally
@@ -4455,8 +4464,20 @@ The &'l'& (the letter &"ell"&) flag specifies that only local deliveries are to
 be done. If a message requires any remote deliveries, it remains on the queue
 for later delivery.
 
-.vitem &%-q%&<&'qflags'&>&~<&'start&~id'&>&~<&'end&~id'&>
+.new
+.vitem &%-q[q][i][f[f]][l][G<name>[/<time>]]]%&
+.oindex "&%-qG%&"
+.cindex queue named
+.cindex "named queues"
 .cindex "queue" "delivering specific messages"
+If the &'G'& flag and a name is present, the queue runner operates on the
+queue with the given name rather than the default queue.
+The name should not contain a &'/'& character.
+For a periodic queue run (see below)
+append to the name a slash and a time value.
+.wen
+
+.vitem &%-q%&<&'qflags'&>&~<&'start&~id'&>&~<&'end&~id'&>
 When scanning the queue, Exim can be made to skip over messages whose ids are
 lexically less than a given value by following the &%-q%& option with a
 starting message id. For example:
@@ -6147,7 +6168,8 @@ errors:
 This causes any temporarily failing address to be retried every 15 minutes for
 2 hours, then at intervals starting at one hour and increasing by a factor of
 1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
-is not delivered after 4 days of temporary failure, it is bounced.
+is not delivered after 4 days of temporary failure, it is bounced. The time is
+measured from first failure, not from the time the message was received.
 
 If the retry section is removed from the configuration, or is empty (that is,
 if no retry rules are defined), Exim will not retry deliveries. This turns
@@ -6609,7 +6631,7 @@ lookup types support only literal keys.
 .endlist ilist
 
 
-.section "Query-style lookup types" "SECID62"
+.section "Query-style lookup types" "SECTquerystylelookups"
 .cindex "lookup" "query-style types"
 .cindex "query-style lookup" "list of types"
 The supported query-style lookup types are listed below. Further details about
@@ -7773,7 +7795,14 @@ domain, host, address and local part lists.
 
 .section "Expansion of lists" "SECTlistexpand"
 .cindex "expansion" "of lists"
-Each list is expanded as a single string before it is used. The result of
+Each list is expanded as a single string before it is used.
+
+.new
+&'Exception: the router headers_remove option, where list-item
+splitting is done before string-expansion.'&
+.wen
+
+The result of
 expansion must be a list, possibly containing empty items, which is split up
 into separate items for matching. By default, colon is the separator character,
 but this can be varied if necessary. See sections &<<SECTlistconstruct>>& and
@@ -11509,18 +11538,6 @@ contain the trailing slash. If &$config_file$& does not contain a slash,
 .vindex "&$config_file$&"
 The name of the main configuration file Exim is using.
 
-.vitem &$demime_errorlevel$&
-.vindex "&$demime_errorlevel$&"
-This variable is available when Exim is compiled with
-the content-scanning extension and the obsolete &%demime%& condition. For
-details, see section &<<SECTdemimecond>>&.
-
-.vitem &$demime_reason$&
-.vindex "&$demime_reason$&"
-This variable is available when Exim is compiled with the
-content-scanning extension and the obsolete &%demime%& condition. For details,
-see section &<<SECTdemimecond>>&.
-
 .vitem &$dkim_cur_signer$& &&&
        &$dkim_verify_status$& &&&
        &$dkim_verify_reason$& &&&
@@ -11652,12 +11669,6 @@ The first character is a major version number, currently 4.
 Then after a dot, the next group of digits is a minor version number.
 There may be other characters following the minor version.
 
-.vitem &$found_extension$&
-.vindex "&$found_extension$&"
-This variable is available when Exim is compiled with the
-content-scanning extension and the obsolete &%demime%& condition. For details,
-see section &<<SECTdemimecond>>&.
-
 .vitem &$header_$&<&'name'&>
 This is not strictly an expansion variable. It is expansion syntax for
 inserting the message header line with the given name. Note that the name must
@@ -12157,14 +12168,16 @@ a single-component name, Exim calls &[gethostbyname()]& (or
 qualified host name. See also &$smtp_active_hostname$&.
 
 
-.vitem &$proxy_host_address$& &&&
-       &$proxy_host_port$& &&&
-       &$proxy_target_address$& &&&
-       &$proxy_target_port$& &&&
+.new
+.vitem &$proxy_external_address$& &&&
+       &$proxy_external_port$& &&&
+       &$proxy_local_address$& &&&
+       &$proxy_local_port$& &&&
        &$proxy_session$&
 These variables are only available when built with Proxy Protocol
 or Socks5 support
 For details see chapter &<<SECTproxyInbound>>&.
+.wen
 
 .vitem &$prdr_requested$&
 .cindex "PRDR" "variable for"
@@ -12195,6 +12208,14 @@ The value set for the &%qualify_domain%& option in the configuration file.
 The value set for the &%qualify_recipient%& option in the configuration file,
 or if not set, the value of &$qualify_domain$&.
 
+.new
+.vitem &$queue_name$&
+.vindex &$queue_name$&
+.cindex "named queues"
+.cindex queues named
+The name of the spool queue in use; empty for the default queue.
+.wen
+
 .vitem &$rcpt_count$&
 .vindex "&$rcpt_count$&"
 When a message is being received by SMTP, this variable contains the number of
@@ -12995,6 +13016,17 @@ overriding the setting of &%perl_at_start%&.
 There is also a command line option &%-pd%& (for delay) which suppresses the
 initial startup, even if &%perl_at_start%& is set.
 
+.new
+.ilist
+.oindex "&%perl_taintmode%&"
+.cindex "Perl" "taintmode"
+To provide more security executing Perl code via the embedded Perl
+interpeter, the &%perl_taintmode%& option can be set. This enables the
+taint mode of the Perl interpreter. You are encouraged to set this
+option to a true value. To avoid breaking existing installations, it
+defaults to false.
+.wen
+
 
 .section "Calling Perl subroutines" "SECID86"
 When the configuration file includes a &%perl_startup%& option you can make use
@@ -13523,6 +13555,7 @@ listed in more than one group.
 .table2
 .row &%perl_at_start%&               "always start the interpreter"
 .row &%perl_startup%&                "code to obey when starting Perl"
+.row &%perl_taintmode%&		     "enable taint mode in Perl"
 .endtable
 
 
@@ -15640,14 +15673,20 @@ local parts. Exim's default configuration does this.
 
 
 .option perl_at_start main boolean false
+.cindex "Perl"
 This option is available only when Exim is built with an embedded Perl
 interpreter. See chapter &<<CHAPperl>>& for details of its use.
 
 
 .option perl_startup main string unset
+.cindex "Perl"
 This option is available only when Exim is built with an embedded Perl
 interpreter. See chapter &<<CHAPperl>>& for details of its use.
 
+.option perl_startup main boolean false
+.cindex "Perl"
+This Option enables the taint mode of the embedded Perl interpreter.
+
 
 .option pgsql_servers main "string list" unset
 .cindex "PostgreSQL lookup type" "server list"
@@ -15887,7 +15926,7 @@ large list. In most situations, &%queue_run_in_order%& should not be set.
 
 
 
-.option queue_run_max main integer 5
+.option queue_run_max main integer&!! 5
 .cindex "queue runner" "maximum number of"
 This controls the maximum number of queue runner processes that an Exim daemon
 can run simultaneously. This does not mean that it starts them all at once,
@@ -15902,6 +15941,13 @@ the limit, allowing any number of simultaneous queue runner processes to be
 run. If you do not want queue runs to occur, omit the &%-q%&&'xx'& setting on
 the daemon's command line.
 
+.new
+.cindex queues named
+.condex "named queues"
+To set limits for different named queues use
+an expansion depending on the &$queue_name$& variable.
+.wen
+
 .option queue_smtp_domains main "domain list&!!" unset
 .cindex "queueing incoming messages"
 .cindex "message" "queueing remote deliveries"
@@ -16832,8 +16878,8 @@ of the STARTTLS command to set up an encrypted session is advertised in
 response to EHLO only to those client hosts that match this option. See
 chapter &<<CHAPTLS>>& for details of Exim's support for TLS.
 Note that the default value requires that a certificate be supplied
-using the &%tls_certificate%& option.  If no certificate is available then
-the &%tls_advertise_hosts%& option should be set empty.
+using the &%tls_certificate%& option.  If TLS support for incoming connections
+is not required the &%tls_advertise_hosts%& option should be set empty.
 
 
 .option tls_certificate main string&!! unset
@@ -16854,6 +16900,11 @@ if the OpenSSL build supports TLS extensions and the TLS client sends the
 Server Name Indication extension, then this option and others documented in
 &<<SECTtlssni>>& will be re-expanded.
 
+.new
+If this option is unset or empty a fresh self-signed certificate will be
+generated for every connection.
+.wen
+
 .option tls_crl main string&!! unset
 .cindex "TLS" "server certificate revocation list"
 .cindex "certificate" "revocation list for server"
@@ -26901,7 +26952,8 @@ Documentation of the strings accepted may be found in the GnuTLS manual, under
 &url(http://www.gnutls.org/manual/html_node/Priority-Strings.html),
 but beware that this relates to GnuTLS 3, which may be newer than the version
 installed on your system.  If you are using GnuTLS 3,
-&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string, then the example code)
+then the example code
+&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string)
 on that site can be used to test a given string.
 
 For example:
@@ -26946,10 +26998,17 @@ with the error
 If a STARTTLS command is issued within an existing TLS session, it is
 rejected with a 554 error code.
 
-To enable TLS operations on a server, you must set &%tls_advertise_hosts%& to
-match some hosts. You can, of course, set it to * to match all hosts.
-However, this is not all you need to do. TLS sessions to a server won't work
-without some further configuration at the server end.
+To enable TLS operations on a server, the &%tls_advertise_hosts%& option
+must be set to match some hosts. The default is * which matches all hosts.
+
+.new
+If this is all you do, TLS encryption will be enabled but not authentication -
+meaning that the peer has no assurance it is actually you he is talking to.
+You gain protection from a passive sniffer listening on the wire but not
+from someone able to intercept the communication.
+.wen
+
+Further protection requires some further configuration at the server end.
 
 It is rumoured that all existing clients that support TLS/SSL use RSA
 encryption. To make this work you need to set, in the server,
@@ -28544,6 +28603,17 @@ all the conditions are true, wherever it appears in an ACL command, whereas
 effect.
 
 
+.new
+.vitem &*queue*&&~=&~<&'text'&>
+This modifier specifies the use of a named queue for spool files
+for the message.
+This could be used, for example, for known high-volume burst sources
+of traffic, or for quarantine of messages.
+Separate queue-runner processes will be needed for named queues.
+If the text after expansion is empty, the default queue is used.
+.wen
+
+
 .vitem &*remove_header*&&~=&~<&'text'&>
 This modifier specifies one or more header names in a colon-separated list
  that are to be removed from an incoming message, assuming, of course, that
@@ -29173,12 +29243,6 @@ If all goes well, the condition is true. It is false only if there are
 problems such as a syntax error or a memory shortage. For more details, see
 chapter &<<CHAPexiscan>>&.
 
-.vitem &*demime&~=&~*&<&'extension&~list'&>
-.cindex "&%demime%& ACL condition"
-This condition is available only when Exim is compiled with the
-content-scanning extension. Its use is described in section
-&<<SECTdemimecond>>&.
-
 .vitem &*dnslists&~=&~*&<&'list&~of&~domain&~names&~and&~other&~data'&>
 .cindex "&%dnslists%& ACL condition"
 .cindex "DNS list" "in ACL"
@@ -30989,10 +31053,6 @@ conditions.
 Two new main configuration options: &%av_scanner%& and &%spamd_address%&.
 .endlist
 
-There is another content-scanning configuration option for &_Local/Makefile_&,
-called WITH_OLD_DEMIME. If this is set, the old, deprecated &%demime%& ACL
-condition is compiled, in addition to all the other content-scanning features.
-
 Content-scanning is continually evolving, and new features are still being
 added. While such features are still unstable and liable to incompatible
 changes, they are made available in Exim by setting options whose names begin
@@ -31242,7 +31302,7 @@ This is a daemon type scanner that is aimed mainly at Polish users, though some
 parts of documentation are now available in English. You can get it at
 &url(http://linux.mks.com.pl/). The only option for this scanner type is
 the maximum number of processes used simultaneously to scan the attachments,
-provided that the demime facility is employed and also provided that mksd has
+provided that mksd has
 been run with at least the same number of child processes. For example:
 .code
 av_scanner = mksd:2
@@ -31333,23 +31393,17 @@ When a virus is found, the condition sets up an expansion variable called
 &%message%& modifier that specifies the error returned to the sender, and/or in
 logging data.
 
-If your virus scanner cannot unpack MIME and TNEF containers itself, you should
-use the &%demime%& condition (see section &<<SECTdemimecond>>&) before the
-&%malware%& condition.
-
 Beware the interaction of Exim's &%message_size_limit%& with any size limits
 imposed by your anti-virus scanner.
 
 Here is a very simple scanning example:
 .code
 deny message = This message contains malware ($malware_name)
-     demime = *
      malware = *
 .endd
 The next example accepts messages when there is a problem with the scanner:
 .code
 deny message = This message contains malware ($malware_name)
-     demime = *
      malware = */defer_ok
 .endd
 The next example shows how to use an ACL variable to scan with both sophie and
@@ -31845,90 +31899,6 @@ are set to any substrings captured by the regular expression.
 &*Warning*&: With large messages, these conditions can be fairly
 CPU-intensive.
 
-
-
-
-.section "The demime condition" "SECTdemimecond"
-.cindex "content scanning" "MIME checking"
-.cindex "MIME content scanning"
-The &%demime%& ACL condition provides MIME unpacking, sanity checking and file
-extension blocking. It is usable only in the DATA and non-SMTP ACLs. The
-&%demime%& condition uses a simpler interface to MIME decoding than the MIME
-ACL functionality, but provides no additional facilities. Please note that this
-condition is deprecated and kept only for backward compatibility. You must set
-the WITH_OLD_DEMIME option in &_Local/Makefile_& at build time to be able to
-use the &%demime%& condition.
-
-The &%demime%& condition unpacks MIME containers in the message. It detects
-errors in MIME containers and can match file extensions found in the message
-against a list. Using this facility produces files containing the unpacked MIME
-parts of the message in the temporary scan directory. If you do antivirus
-scanning, it is recommended that you use the &%demime%& condition before the
-antivirus (&%malware%&) condition.
-
-On the right-hand side of the &%demime%& condition you can pass a
-colon-separated list of file extensions that it should match against. For
-example:
-.code
-deny message = Found blacklisted file attachment
-     demime  = vbs:com:bat:pif:prf:lnk
-.endd
-If one of the file extensions is found, the condition is true, otherwise it is
-false. If there is a temporary error while demimeing (for example, &"disk
-full"&), the condition defers, and the message is temporarily rejected (unless
-the condition is on a &%warn%& verb).
-
-The right-hand side is expanded before being treated as a list, so you can have
-conditions and lookups there. If it expands to an empty string, &"false"&, or
-zero (&"0"&), no demimeing is done and the condition is false.
-
-The &%demime%& condition set the following variables:
-
-.vlist
-.vitem &$demime_errorlevel$&
-.vindex "&$demime_errorlevel$&"
-When an error is detected in a MIME container, this variable contains the
-severity of the error, as an integer number. The higher the value, the more
-severe the error (the current maximum value is 3). If this variable is unset or
-zero, no error occurred.
-
-.vitem &$demime_reason$&
-.vindex "&$demime_reason$&"
-When &$demime_errorlevel$& is greater than zero, this variable contains a
-human-readable text string describing the MIME error that occurred.
-.endlist
-
-.vlist
-.vitem &$found_extension$&
-.vindex "&$found_extension$&"
-When the &%demime%& condition is true, this variable contains the file
-extension it found.
-.endlist
-
-Both &$demime_errorlevel$& and &$demime_reason$& are set by the first call of
-the &%demime%& condition, and are not changed on subsequent calls.
-
-If you do not want to check for file extensions, but rather use the &%demime%&
-condition for unpacking or error checking purposes, pass &"*"& as the
-right-hand side value. Here is a more elaborate example of how to use this
-facility:
-.code
-# Reject messages with serious MIME container errors
-deny  message = Found MIME error ($demime_reason).
-      demime = *
-      condition = ${if >{$demime_errorlevel}{2}{1}{0}}
-
-# Reject known virus spreading file extensions.
-# Accepting these is pretty much braindead.
-deny  message = contains $found_extension file (blacklisted).
-      demime  = com:vbs:bat:pif:scr
-
-# Freeze .exe and .doc files. Postmaster can
-# examine them and eventually thaw them.
-deny  log_message = Another $found_extension file.
-      demime = exe:doc
-      control = freeze
-.endd
 .ecindex IIDcosca
 
 
@@ -35612,6 +35582,7 @@ the following table:
 &`P   `&        on &`<=`& lines: protocol used
 &`    `&        on &`=>`& and &`**`& lines: return path
 &`PRX `&        on &'<='& and&`=>`& lines: proxy address
+&`Q   `&        alternate queue name
 &`QT  `&        on &`=>`& lines: time spent on queue so far
 &`    `&        on &"Completed"& lines: time spent on queue
 &`R   `&        on &`<=`& lines: reference for local bounce
@@ -38303,18 +38274,20 @@ Use of a proxy is enabled by setting the &%hosts_proxy%&
 main configuration option to a hostlist; connections from these
 hosts will use Proxy Protocol.
 
+.new
 The following expansion variables are usable
 (&"internal"& and &"external"& here refer to the interfaces
 of the proxy):
 .display
-&'proxy_host_address   '& internal IP address of the proxy
-&'proxy_host_port      '& internal TCP port of the proxy
-&'proxy_target_address '& external IP address of the proxy
-&'proxy_target_port    '& external TCP port of the proxy
+&'proxy_external_address   '& IP of host being proxied or IP of remote interface of proxy
+&'proxy_external_port      '& Port of host being proxied or Port on remote interface of proxy
+&'proxy_local_address '& IP of proxy server inbound or IP of local interface of proxy
+&'proxy_local_port    '& Port of proxy server inbound or Port on local interface of proxy
 &'proxy_session        '& boolean: SMTP connection via proxy
 .endd
-If &$proxy_session$& is set but &$proxy_host_address$& is empty
+If &$proxy_session$& is set but &$proxy_external_address$& is empty
 there was a protocol error.
+.wen
 
 Since the real connections are all coming from the proxy, and the
 per host connection tracking is done before Proxy Protocol is