X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/5c3a378fcb71aaf98785a642e9b46489232eeb79..7eb6c37c5084760c1d1469bd4be652b479a8df55:/src/OS/Makefile-Base

diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base
index e62f64ad8..38d719837 100644
--- a/src/OS/Makefile-Base
+++ b/src/OS/Makefile-Base
@@ -1,5 +1,3 @@
-# $Cambridge: exim/src/OS/Makefile-Base,v 1.16 2009/01/20 16:06:14 fanf2 Exp $
-
 # This file is the basis of the main makefile for Exim and friends. The
 # makefile at the top level arranges to build the main makefile by calling
 # scripts/Configure-Makefile from within the build directory. This
@@ -34,7 +32,8 @@ FE       = $(FULLECHO)
 # up-to-date. Then the os-specific source files and the C configuration file
 # are set up, and finally it goes to the main Exim target.
 
-all:    $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
+all:       utils exim
+config:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h
 
 checklocalmake:
 	@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
@@ -96,20 +95,16 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 
-.PHONY: all allexim buildauths buildlookups buildrouters \
+.PHONY: all config utils \
+	buildauths buildlookups buildpdkim buildrouters \
         buildtransports checklocalmake clean
 
 
-# This is the real default target for all the various exim binaries and
-# scripts, once the configuring stuff is done.
-
-allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
+utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \
-        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
-        buildlookups buildrouters buildtransports \
-        buildauths exim
+        exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
 
 
 # Targets for special-purpose configuration header builders
@@ -119,7 +114,7 @@ buildconfig: buildconfig.c
 
 
 # Target for the exicyclog utility script
-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src
 	@rm -f exicyclog
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -144,7 +139,7 @@ exicyclog: Makefile config.h ../src/exicyclog.src
 	@echo ">>> exicyclog script built"
 
 # Target for the exinext utility script
-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src
 	@rm -f exinext
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -159,7 +154,7 @@ exinext: Makefile config.h ../src/exinext.src
 	@echo ">>> exinext script built"
 
 # Target for the exiwhat utility script
-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src
 	@rm -f exiwhat
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -180,7 +175,7 @@ exiwhat: Makefile config.h ../src/exiwhat.src
 	@echo ">>> exiwhat script built"
 
 # Target for the exim_checkaccess utility script
-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src
 	@rm -f exim_checkaccess
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -196,7 +191,7 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
 	@echo ">>> exim_checkaccess script built"; echo ""
 
 # Target for the Exim monitor start-up script
-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
           ../Local/eximon.conf
 	@rm -f eximon
 	$(SHELL) $(SCRIPTS)/Configure-eximon
@@ -300,35 +295,32 @@ convert4r4: Makefile ../src/convert4r4.src
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dk.o dkim-exim.o dcc.o
+OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o dane.o
 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
 
+OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
+
 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
-        filtertest.o globals.o \
+        filtertest.o globals.o dkim.o \
         header.o host.o ip.o log.o lss.o match.o moan.o \
         os.o parse.o queue.o \
         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
         route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
-        store.o string.o tls.o tod.o transport.o tree.o verify.o \
+        std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
+        $(OBJ_LOOKUPS) \
         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 
-exim:   lookups/lookups.a auths/auths.a \
-        routers/routers.a transports/transports.a \
-        $(OBJ_EXIM) version.c
-	@echo " "
-	awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
-	rm -f cnumber.h; mv cnumber.temp cnumber.h
-	@echo "$(CC) version.c"
-	$(FE)$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
-	rm -f exim
+exim:   buildlookups buildauths pdkim/pdkim.a \
+        buildrouters buildtransports \
+        $(OBJ_EXIM) version.o
 	@echo "$(LNCC) -o exim"
 	$(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
 	  routers/routers.a transports/transports.a lookups/lookups.a \
-	  auths/auths.a \
+	  auths/auths.a pdkim/pdkim.a \
 	  $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
 	  $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
 	  $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
@@ -360,10 +352,10 @@ exim_dumpdb: $(OBJ_DUMPDB)
 
 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 
-exim_fixdb:  $(OBJ_FIXDB)
+exim_fixdb:  $(OBJ_FIXDB) buildauths
 	@echo "$(LNCC) -o exim_fixdb"
 	$(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
-	  $(LIBS) $(EXTRALIBS) $(DBMLIB)
+	  auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
 	@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
 	  echo $(STRIP_COMMAND) exim_fixdb; \
 	  $(STRIP_COMMAND) exim_fixdb; \
@@ -460,6 +452,15 @@ PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../gl
 .c.o:;  @echo "$(CC) $*.c"
 	$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
 
+# Update Exim's version information and build the version object.
+
+version.h::
+	@../scripts/reversion
+
+cnumber.h: version.h
+
+version.o: $(HDRS) cnumber.h version.h version.c
+
 # This is the dummy module for use by test compiles of individual modules. It
 # contains functions such as log_write() that may be called from bits of Exim
 # in the tested code.
@@ -527,7 +528,7 @@ util-os.o:       $(HDRS) os.c
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 
-local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 	@echo "$(CC) local_scan.c"
 	$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 
@@ -571,14 +572,15 @@ smtp_in.o:       $(HDRS) smtp_in.c
 smtp_out.o:      $(HDRS) smtp_out.c
 spool_in.o:      $(HDRS) spool_in.c
 spool_out.o:     $(HDRS) spool_out.c
+std-crypto.o:    $(HDRS) std-crypto.c
 store.o:         $(HDRS) store.c
 string.o:        $(HDRS) string.c
-tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o:           $(HDRS) tls.c tls-gnu.c tlscert-gnu.c tls-openssl.c tlscert-openssl.c
 tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c
 verify.o:        $(HDRS) verify.c
-
+dkim.o:          $(HDRS) dkim.c
 
 # Dependencies for WITH_CONTENT_SCAN modules
 
@@ -597,11 +599,11 @@ demime.o:        $(HDRS) demime.c
 # Dependencies for EXPERIMENTAL_* modules
 
 bmi_spam.o:      $(HDRS) bmi_spam.c
+dane.o:		 $(HDRS) dane.c dane-gnu.c dane-openssl.c
+dcc.o:           $(HDRS) dcc.h dcc.c
+dmarc.o:         $(HDRS) dmarc.h dmarc.c
 spf.o:           $(HDRS) spf.h spf.c
 srs.o:           $(HDRS) srs.h srs.c
-dk.o:            $(HDRS) dk.h dk.c
-dkim-exim.o:     $(HDRS) dkim-exim.h dkim-exim.c
-dcc.o:           $(HDRS) dcc.h dcc.c
 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles
@@ -613,6 +615,11 @@ dcc.o:           $(HDRS) dcc.h dcc.c
 
 drtables.o:      $(HDRS) drtables.c
 
+# We depend upon object files built as part of building the lookups library
+# When using parallel make, we don't have the dependency to force building
+# in the sub-directory unless we force that dependency:
+
+$(OBJ_LOOKUPS):  buildlookups
 
 # The exim monitor's private modules - the sources live in a private
 # subdirectory. The final binary combines the private modules with some
@@ -640,35 +647,45 @@ $(MONBIN): $(HDRS)
 
 # The lookups library.
 
-buildlookups lookups/lookups.a: config.h
-	 @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
-	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
-	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
-	 echo " "
+buildlookups: config
+	 @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+	   CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
+	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
+	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
+	 @echo " "
 
 # The routers library.
 
-buildrouters routers/routers.a: config.h
-	 @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildrouters: config
+	 @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
-	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
-	 echo " "
+	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+	 @echo " "
 
 # The transports library.
 
-buildtransports transports/transports.a: config.h
-	 @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildtransports: config
+	 @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
-	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
-	 echo " "
+	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+	 @echo " "
 
 # The library of authorization modules
 
-buildauths auths/auths.a: config.h
-	 @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+buildauths: config
+	 @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+	 @echo " "
+
+# The PDKIM library
+
+buildpdkim: pdkim/pdkim.a
+pdkim/pdkim.a: config
+	 @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
-	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
-	 echo " "
+	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+	 @echo " "
 
 # The "clean", "install", and "makefile" targets just pass themselves back to
 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed