X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/44649fdb169979af3c5a08b10889d1ecee48a469..224f418b1ea62a1d1b4bbf261b50b2dc02aed98a:/test/runtest

diff --git a/test/runtest b/test/runtest
index 89fd1f73e..0eda52d91 100755
--- a/test/runtest
+++ b/test/runtest
@@ -165,7 +165,7 @@ if (exists $TEST_STATE->{exim_pid})
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";
-  system("sudo kill -SIGINT $pid");
+  system("sudo kill -INT $pid");
   }
 
 if (opendir(DIR, "spool"))
@@ -179,7 +179,7 @@ if (opendir(DIR, "spool"))
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";
-    system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+    system("sudo rm -f spool/$spool; sudo kill -INT $pid");
     }
   }
 else
@@ -485,7 +485,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 
   # Time on queue tolerance
-  s/QT=1s/QT=0s/;
+  s/(QT|D)=1s/$1=0s/;
 
   # Eximstats heading
   s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
@@ -497,7 +497,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:
+  #   TLSv1:AES128-GCM-SHA256:128
   #   TLSv1:AES256-SHA:256
+  #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1.2:DHE-RSA-AES256-SHA:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
@@ -507,7 +509,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
 
-  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.2:/$1TLSv1:/xg;
+  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
   s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 
@@ -535,10 +539,17 @@ RESET_AFTER_EXTRA_LINE_READ:
 #(dodgy test?)  s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
   s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
 
+  # (this new one is a generic channel-read error, but the testsuite
+  # only hits it in one place)
+  s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
+
   # (replace old with new, hoping that old only happens in one situation)
   s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
   s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
 
+  # signature algorithm names
+  s/RSA-SHA1/RSA-SHA/;
+
 
   # ======== Caller's login, uid, gid, home, gecos ========
 
@@ -552,7 +563,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 
-  s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+  s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
 
   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all
@@ -743,7 +754,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 
-  s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
 
   # ======== Maildir things ========
   # timestamp output in maildir processing
@@ -793,6 +804,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   # other output is fragile; perhaps the debug output should be revised instead.
   s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
 
+  # ==========================================================
+  # MIME boundaries in RFC3461 DSN messages
+  s/\d{8,10}-eximdsn-\d{8,10}/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+
   # ==========================================================
   # Some munging is specific to the specific file types
 
@@ -821,6 +836,12 @@ RESET_AFTER_EXTRA_LINE_READ:
         next;
         }
       }
+
+    # openssl version variances
+    next if /^SSL info: unknown state/;
+    next if /^SSL info: SSLv2\/v3 write client hello A/;
+    next if /^SSL info: SSLv3 read server key exchange A/;
+
     }
 
   # ======== stderr ========
@@ -875,7 +896,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # As of Exim 4.74, we log when a setgid fails; because we invoke Exim
     # with -be, privileges will have been dropped, so this will always
     # be the case
-    next if /^changing group to \d+ failed: Operation not permitted/;
+    next if /^changing group to \d+ failed: (Operation not permitted|Not owner)/;
 
     # We might not keep this check; rather than change all the tests, just
     # ignore it as long as it succeeds; then we only need to change the
@@ -982,6 +1003,11 @@ RESET_AFTER_EXTRA_LINE_READ:
         @saved = ();
         }
 
+    # Skip hosts_require_dane checks when the options
+    # are unset, because dane ain't always there.
+
+    next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
       # Skip some lines that Exim puts out at the start of debugging output
       # because they will be different in different binaries.
 
@@ -1003,6 +1029,14 @@ RESET_AFTER_EXTRA_LINE_READ:
     next;
     }
 
+  # ======== log ========
+
+  elsif ($is_log)
+    {
+    # Berkeley DB version differences
+    next if / Berkeley DB error: /;
+    }
+
   # ======== All files other than stderr ========
 
   print MUNGED;
@@ -1264,16 +1298,29 @@ return 1;
 #  paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
 # Search strings starting with 's' do substitutions;
 # with '/' do line-skips.
+# Triggered by a scriptfile line "munge <name>"
 ##################################################
 $munges =
   { 'dnssec' =>
-    { 'stderr' => '/^Reverse DNS security status: unverified\n/', },
+    { 'stderr' => '/^Reverse DNS security status: unverified\n/' },
 
     'gnutls_unexpected' =>
-    { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./', },
+    { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./' },
 
     'gnutls_handshake' =>
-    { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/', },
+    { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
+
+    'optional_events' =>
+    { 'stdout' => '/event_action =/' },
+
+    'optional_ocsp' =>
+    { 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
+
+    'no_tpt_filter_epipe' =>
+    { 'stderr' => '/^writing error 32: Broken pipe$/' },
+
+    'optional_cert_hostnames' =>
+    { 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
 
   };
 
@@ -1727,14 +1774,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");
       close DAEMONCMD;                                   # Waits for process
       }
     }
@@ -1981,7 +2028,8 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
     if ( $args =~ /\$msg\d/ )
       {
-      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
+        unless $force_continue;
       }
     }
 
@@ -2694,7 +2742,7 @@ $pwcomm = $pwcomm;
 
 $parm_caller_group = getgrgid($parm_caller_gid);
 
-print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
+print "Program caller is $parm_caller ($parm_caller_uid), whose group is $parm_caller_group ($parm_caller_gid)\n";
 print "Home directory is $parm_caller_home\n";
 
 unless (defined $parm_eximgroup)
@@ -2732,7 +2780,7 @@ while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;
-    next if ($ip eq "127.0.0.1");
+    next if ($ip =~ /^127\./);
     $parm_ipv4 = $ip;
     }
 
@@ -3338,9 +3386,20 @@ foreach $test (@test_list)
   undef %expected_msglogs;
 
   # Open the test's script
-
   open(SCRIPT, "scripts/$test") ||
     tests_exit(-1, "Failed to open \"scripts/$test\": $!");
+  # Run through the script once to set variables which should be global
+  while (<SCRIPT>)
+    {
+    if (/^no_message_check/) { $message_skip = 1; next; }
+    if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
+    if (/^no_stderr_check/)  { $stderr_skip = 1; next; }
+    if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
+    if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
+    if (/^sortlog/)          { $sortlog = 1; next; }
+    }
+  # Reset to beginning of file for per test interpreting/processing
+  seek(SCRIPT, 0, 0);
 
   # The first line in the script must be a comment that is used to identify
   # the set of tests as a whole.
@@ -3363,6 +3422,8 @@ foreach $test (@test_list)
     while (<SCRIPT>)
       {
       $lineno++;
+      # Could remove these variable settings because they are already
+      # set above, but doesn't hurt to leave them here.
       if (/^no_message_check/) { $message_skip = 1; next; }
       if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
       if (/^no_stderr_check/)  { $stderr_skip = 1; next; }