X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/3cc66b4537846d0f9211fcb63c426be9a553edb1..4b2241d2228351057f63f954de46b0449288e3ba:/doc/doc-txt/ChangeLog?ds=inline diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index ee5817026..85edf47d1 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,647 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.431 2006/11/13 11:56:41 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.625 2010/06/06 02:08:50 pdp Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.73 +----------------- + +PP/01 Date: & Message-Id: revert to normally being appended to a message, + only prepend for the Resent-* case. Fixes regression introduced in + Exim 4.70 by NM/22 for Bugzilla 607. + +PP/02 Include check_rfc2047_length in configure.default because we're seeing + increasing numbers of administrators be bitten by this. + +JJ/01 Added DISABLE_DKIM and comment to src/EDITME + +PP/03 Bugzilla 994: added openssl_options main configuration option. + +PP/04 Bugzilla 995: provide better SSL diagnostics on failed reads. + +PP/05 Bugzilla 834: provide a permit_codedump option for pipe transports. + +PP/06 Adjust NTLM authentication to handle SASL Initial Response. + +PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but + without a peer certificate (I believe), leading to a segfault because of + an assumption that peers always have certificates. Be a little more + paranoid. Problem reported by Martin Tscholak. + +PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content + filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes + NB: ClamAV planning to remove STREAM in "middle of 2010". + +PP/09 Implemented reverse_ip expansion operator. + +PP/10 Bugzilla 937: provide a "debug" ACL control. + +PP/11 Bugzilla 922: Documentation dusting, patch provided by John Horne. + +PP/12 Bugzilla 973: Implement --version. + + +Exim version 4.72 +----------------- + +JJ/01 installed exipick 20100104.1, adding $max_received_linelength, + $data_path, and $header_path variables; fixed documentation bugs and + typos + +JJ/02 installed exipick 20100222.0, added --input-dir and --finput to allow + exipick to access non-standard spools, including the "frozen" queue + (Finput) + +NM/01 Bugzilla 965: Support mysql stored procedures. + Patch from Alain Williams + +NM/02 Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD + +NM/03 Bugzilla 955: Documentation fix for max_rcpts. + Patch from Andreas Metzler + +NM/04 Bugzilla 954: Fix for unknown responses from Dovecot authenticator. + Patch from Kirill Miazine + +NM/05 Bugzilla 671: Added umask to procmail example. + +JJ/03 installed exipick 20100323.0, fixing doc bug + +NM/06 Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail + directory. Notification and patch from Dan Rosenberg. + +TK/01 PDKIM: Upgrade PolarSSL files to upstream version 0.12.1. + +TK/02 Improve log output when DKIM signing operation fails. + +MH/01 Treat the transport option dkim_domain as a colon separated + list, not as a single string, and sign the message with each element, + omitting multiple occurences of the same signer. + +NM/07 Null terminate DKIM strings, Null initialise DKIM variable + Bugzilla 985, 986. Patch by Simon Arlott + +NM/08 Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related) + Patch by Simon Arlott + +PP/01 Bugzilla 989: CVE-2010-2024 - work round race condition on + MBX locking. Notification from Dan Rosenberg. + + +Exim version 4.71 +----------------- + +TK/01 Bugzilla 912: Fix DKIM segfault on empty headers/body. + +NM/01 Bugzilla 913: Documentation fix for gnutls_* options. + +NM/02 Bugzilla 722: Documentation for randint. Better randomness defaults. + +NM/03 Bugzilla 847: Enable DNSDB lookup by default. + +NM/04 Bugzilla 915: Flag broken perl installation during build. + + +Exim version 4.70 +----------------- + +TK/01 Added patch by Johannes Berg that expands the main option + "spamd_address" if it starts with a dollar sign. + +TK/02 Write list of recipients to X-Envelope-Sender header when building + the mbox-format spool file for content scanning (suggested by Jakob + Hirsch). + +TK/03 Added patch by Wolfgang Breyha that adds experimental DCC + (http://www.dcc-servers.net/) support via dccifd. Activated by + setting EXPERIMENTAL_DCC=yes in Local/Makefile. + +TK/04 Bugzilla 673: Add f-protd malware scanner support. Patch submitted + by Mark Daniel Reidel . + +NM/01 Bugzilla 657: Embedded PCRE removed from the exim source tree. + When building exim an external PCRE library is now needed - + PCRE is a system library on the majority of modern systems. + See entry on PCRE_LIBS in EDITME file. + +NM/02 Bugzilla 646: Removed unwanted C/R in Dovecot authenticator + conversation. Added nologin parameter to request. + Patch contributed by Kirill Miazine. + +TF/01 Do not log submission mode rewrites if they do not change the address. + +TF/02 Bugzilla 662: Fix stack corruption before exec() in daemon.c. + +NM/03 Bugzilla 602: exicyclog now handles panic log, and creates empty + log files in place. Contributed by Roberto Lima. + +NM/04 Bugzilla 667: Close socket used by dovecot authenticator. + +TF/03 Bugzilla 615: When checking the local_parts router precondition + after a local_part_suffix or local_part_prefix option, Exim now + does not use the address's named list lookup cache, since this + contains cached lookups for the whole local part. + +NM/05 Bugzilla 521: Integrated SPF Best Guess support contributed by + Robert Millan. Documentation is in experimental-spec.txt. + +TF/04 Bugzilla 668: Fix parallel build (make -j). + +NM/05.2 Bugzilla 437: Prevent Maildir aux files being created with mode 000. + +NM/05.3 Bugzilla 598: Improvement to Dovecot authenticator handling. + Patch provided by Jan Srzednicki. + +TF/05 Leading white space used to be stripped from $spam_report which + wrecked the formatting. Now it is preserved. + +TF/06 Save $spam_score, $spam_bar, and $spam_report in spool files, so + that they are available at delivery time. + +TF/07 Fix the way ${extract is skipped in the untaken branch of a conditional. + +TF/08 TLS error reporting now respects the incoming_interface and + incoming_port log selectors. + +TF/09 Produce a more useful error message if an SMTP transport's hosts + setting expands to an empty string. + +NM/06 Bugzilla 744: EXPN did not work under TLS. + Patch provided by Phil Pennock. + +NM/07 Bugzilla 769: Extraneous comma in usage fprintf + Patch provided by Richard Godbee. + +NM/08 Fixed erroneous documentation references to smtp_notquit_acl to be + acl_smtp_notquit, added index entry. + +NM/09 Bugzilla 787: Potential buffer overflow in string_format. + Patch provided by Eugene Bujak. + +NM/10 Bugzilla 770: Problem on some platforms modifying the len parameter to + accept(). Patch provided by Maxim Dounin. + +NM/11 Bugzilla 749: Preserve old behaviour of blanks comparing equal to zero. + Patch provided by Phil Pennock. + +NM/12 Bugzilla 497: Correct behaviour of exiwhat when no config exists. + +NM/13 Bugzilla 590: Correct handling of Resent-Date headers. + Patch provided by Brad "anomie" Jorsch. + +NM/14 Bugzilla 622: Added timeout setting to transport filter. + Patch provided by Dean Brooks. + +TK/05 Add native DKIM support (does not depend on external libraries). + +NM/15 Bugzilla 854: Removed code that symlinks to pcre as its no longer useful. + Patch provided by Graeme Fowler. + +NM/16 Bugzilla 851: Documentation example syntax fix. + +NM/17 Changed NOTICE file to remove references to embedded PCRE. + +NM/18 Bugzilla 894: Fix issue with very long lines including comments in + lsearch. + +NM/19 Bugzilla 745: TLS version reporting. + Patch provided by Phil Pennock. + +NM/20 Bugzilla 167: bool: condition support. + Patch provided by Phil Pennock. + +NM/21 Bugzilla 665: gnutls_compat_mode to allow compatibility with broken + clients. Patch provided by Phil Pennock. + +NM/22 Bugzilla 607: prepend (not append) Resent-Message-ID and Resent-Date. + Patch provided by Brad "anomie" Jorsch. + +NM/23 Bugzilla 687: Fix misparses in eximstats. + Patch provided by Heiko Schlittermann. + +NM/24 Bugzilla 688: Fix exiwhat to handle log_selector = +pid. + Patch provided by Heiko Schlittermann. + +NM/25 Bugzilla 727: Use transport mode as default mode for maildirsize file. + plus update to original patch. + +NM/26 Bugzilla 799: Documentation correction for ratelimit. + +NM/27 Bugzilla 802: Improvements to local interface IP addr detection. + Patch provided by David Brownlee. + +NM/28 Bugzilla 807: Improvements to LMTP delivery logging. + +NM/29 Bugzilla 862, 866, 875: Documentation bugfixes. + +NM/30 Bugzilla 888: TLS documentation bugfixes. + +NM/31 Bugzilla 896: Dovecot buffer overrun fix. + +NM/32 Bugzilla 889: Change all instances of "expr" in shell scripts to "expr --" + Unlike the original bugzilla I have changed all shell scripts in src tree. + +NM/33 Bugzilla 898: Transport filter timeout fix. + Patch by Todd Rinaldo. + +NM/34 Bugzilla 901: Fix sign/unsigned and UTF mistmatches. + Patch by Serge Demonchaux. + +NM/35 Bugzilla 39: Base64 decode bug fixes. + Patch by Jakob Hirsch. + +NM/36 Bugzilla 909: Correct connect() call in dcc code. + +NM/37 Bugzilla 910: Correct issue with relaxed/simple handling. + +NM/38 Bugzilla 908: Removed NetBSD3 support as no longer needed. + +NM/39 Bugzilla 911: Fixed MakeLinks build script. + + +Exim version 4.69 +----------------- + +TK/01 Add preliminary DKIM support. Currently requires a forked version of + ALT-N's libdkim that I have put here: + http://duncanthrax.net/exim-experimental/ + + Note to Michael Haardt: I had to rename some vars in sieve.c. They + were called 'true' and it seems that C99 defines that as a reserved + keyword to be used with 'bool' variable types. That means you could + not include C99-style headers which use bools without triggering + build errors in sieve.c. + +NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked + as mailq or other aliases. Changed the --help handling significantly + to do whats expected. exim_usage() emits usage/help information. + +SC/01 Added the -bylocaldomain option to eximstats. + +NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr. + +NM/03 Bugzilla 613: Documentation fix for acl_not_smtp. + +NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall). + + +Exim version 4.68 +----------------- + +PH/01 Another patch from the Sieve maintainer. + +PH/02 When an IPv6 address is converted to a string for single-key lookup + in an address list (e.g. for an item such as "net24-dbm;/net/works"), + dots are used instead of colons so that keys in lsearch files need not + contain colons. This was done some time before quoting was made available + in lsearch files. However, iplsearch files do require colons in IPv6 keys + (notated using the quote facility) so as to distinguish them from IPv4 + keys. This meant that lookups for IP addresses in host lists did not work + for iplsearch lookups. + + This has been fixed by arranging for IPv6 addresses to be expressed with + colons if the lookup type is iplsearch. This is not incompatible, because + previously such lookups could never work. + + The situation is now rather anomolous, since one *can* have colons in + ordinary lsearch keys. However, making the change in all cases is + incompatible and would probably break a number of configurations. + +TK/01 Change PRVS address formatting scheme to reflect latests BATV draft + version. + +MH/01 The "spam" ACL condition code contained a sscanf() call with a %s + conversion specification without a maximum field width, thereby enabling + a rogue spamd server to cause a buffer overflow. While nobody in their + right mind would setup Exim to query an untrusted spamd server, an + attacker that gains access to a server running spamd could potentially + exploit this vulnerability to run arbitrary code as the Exim user. + +TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use + $primary_hostname instead of what libspf2 thinks the hosts name is. + +MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for + a directory entry by the name of the lookup key. Previously, if a + symlink pointed to a non-existing file or a file in a directory that + Exim lacked permissions to read, a lookup for a key matching that + symlink would fail. Now it is enough that a matching directory entry + exists, symlink or not. (Bugzilla 503.) + +PH/03 The body_linecount and body_zerocount variables are now exported in the + local_scan API. + +PH/04 Added the $dnslist_matched variable. + +PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client. + This means they are set thereafter only if the connection becomes + encrypted. + +PH/06 Added the client_condition to authenticators so that some can be skipped + by clients under certain conditions. + +PH/07 The error message for a badly-placed control=no_multiline_responses left + "_responses" off the end of the name. + +PH/08 Added -Mvc to output a copy of a message in RFC 2822 format. + +PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly + (without spaces) instead of just copying the configuration text. + +PH/10 Added the /noupdate option to the ratelimit ACL condition. + +PH/11 Added $max_received_linelength. + +PH/12 Added +ignore_defer and +include_defer to host lists. + +PH/13 Installed PCRE version 7.2. This needed some changes because of the new + way in which PCRE > 7.0 is built. + +PH/14 Implemented queue_only_load_latch. + +PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a + MAIL command. The effect was to mangle the value on 64-bit systems. + +PH/16 Another patch from the Sieve maintainer. + +PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper. + +PH/18 If a system quota error occurred while trying to create the file for + a maildir delivery, the message "Mailbox is full" was not appended to the + bounce if the delivery eventually timed out. Change 4.67/27 below applied + only to a quota excession during the actual writing of the file. + +PH/19 It seems that peer DN values may contain newlines (and other non-printing + characters?) which causes problems in log lines. The DN values are now + passed through string_printing() before being added to log lines. + +PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle + and InterBase are left for another time.) + +PH/21 Added message_body_newlines option. + +PH/22 Guard against possible overflow in moan_check_errorcopy(). + +PH/23 POSIX allows open() to be a macro; guard against that. + +PH/24 If the recipient of an error message contained an @ in the local part + (suitably quoted, of course), incorrect values were put in $domain and + $local_part during the evaluation of errors_copy. + + +Exim version 4.67 +----------------- + +MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address + is unset (happens when testing with -bh and -oMi isn't used). Thanks to + Jan Srzednicki. + +PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not + issue a MAIL command. + +PH/02 In an ACL statement such as + + deny dnslists = X!=127.0.0.2 : X=127.0.0.2 + + if a client was not listed at all, or was listed with a value other than + 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list, + the condition was not true (as it should be), so access was not denied. + The bug was that the ! inversion was incorrectly passed on to the second + item. This has been fixed. + +PH/03 Added additional dnslists conditions == and =& which are different from + = and & when the dns lookup returns more than one IP address. + +PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the + cipher suites used by GnuTLS. These options are ignored by OpenSSL. + +PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_ + FSYNC, which compiles an option called disable_fsync that allows for + bypassing fsync(). The documentation is heavily laced with warnings. + +SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket. + +PH/06 Some tidies to the infrastructure of the Test Suite that is concerned + with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT + to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile, + including adding "make clean"; (3) Added -fPIC when compiling the test + dynamically loaded module, to get rid of a warning. + +MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce + message fails, move_frozen_messages = true and ignore_bounce_errors_after + = 0s. The bug is otherwise harmless. + +PH/07 There was a bug in the dovecot authenticator such that the value of + $auth1 could be overwritten, and so not correctly preserved, after a + successful authentication. This usually meant that the value preserved by + the server_setid option was incorrect. + +PH/08 Added $smtp_count_at_connection_start, deliberately with a long name. + +PH/09 Installed PCRE release 7.0. + +PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being + run for batched SMTP input. It is now run at the start of every message + in the batch. While fixing this I discovered that the process information + (output by running exiwhat) was not always getting set for -bs and -bS + input. This is fixed, and it now also says "batched" for BSMTP. + +PH/11 Added control=no_pipelining. + +PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's + patch, slightly modified), and move the expansion of helo_data till after + the connection is made in the smtp transport (so it can use these + values). + +PH/13 Added ${rfc2047d: to decoded RFC 2047 strings. + +PH/14 Added log_selector = +pid. + +PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set. + +PH/16 Add ${if forany and ${if forall. + +PH/17 Added dsn_from option to vary the From: line in DSNs. + +PH/18 Flush SMTP output before performing a callout, unless control = + no_callout_flush is set. + +PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender + was true (the default) a successful delivery failed to delete the retry + item, thus causing premature timeout of the address. The bug is now + fixed. + +PH/20 Added hosts_avoid_pipelining to the smtp transport. + +PH/21 Long custom messages for fakedefer and fakereject are now split up + into multiline reponses in the same way that messages for "deny" and + other ACL rejections are. + +PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep, + with slight modification. + +PH/23 Applied sieve patches from the maintainer "tracking the latest notify + draft, changing the syntax and factoring some duplicate code". + +PH/24 When the log selector "outgoing_port" was set, the port was shown as -1 + for deliveries of the second and subsequent messages over the same SMTP + connection. + +PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and + ${reduce, with only minor "tidies". + +SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match. + +PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its + expansion side effects. + +PH/27 When a message times out after an over-quota error from an Exim-imposed + quota, the bounce message says "mailbox is full". This message was not + being given when it was a system quota that was exceeded. It now should + be the same. + +MH/03 Made $recipients available in local_scan(). local_scan() already has + better access to the recipient list through recipients_list[], but + $recipients can be useful in postmaster-provided expansion strings. + +PH/28 The $smtp_command and $smtp_command_argument variables were not correct + in the case of a MAIL command with additional options following the + address, for example: MAIL FROM: SIZE=1234. The option settings + were accidentally chopped off. + +PH/29 SMTP synchronization checks are implemented when a command is read - + there is a check that no more input is waiting when there shouldn't be + any. However, for some commands, a delay in an ACL can mean that it is + some time before the response is written. In this time, more input might + arrive, invalidly. So now there are extra checks after an ACL has run for + HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when + pipelining has not been advertised. + +PH/30 MH's patch to allow iscntrl() characters to be list separators. + +PH/31 Unlike :fail:, a custom message specified with :defer: was not being + returned in the SMTP response when smtp_return_error_details was false. + This has been fixed. + +PH/32 Change the Dovecot authenticator to use read() and write() on the socket + instead of the C I/O that was originally supplied, because problems were + reported on Solaris. + +PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in + Exim which did not show up earlier: it was assuming that a call to + SSL_CTX_set_info_callback() might give an error value. In fact, there is + no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback() + was a macro that became an assignment, so it seemed to work. This has + changed to a proper function call with a void return, hence the compile + error. Exim's code has been fixed. + +PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit + cpus. + +PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify". + +PH/36 Applied John Jetmore's patch to add -v functionality to exigrep. + +PH/37 If a message is not accepted after it has had an id assigned (e.g. + because it turns out to be too big or there is a timeout) there is no + "Completed" line in the log. When some messages of this type were + selected by exigrep, they were listed as "not completed". Others were + picked up by some special patterns. I have improved the selection + criteria to be more general. + +PH/38 The host_find_failed option in the manualroute router can now be set + to "ignore", to completely ignore a host whose IP address cannot be + found. If all hosts are ignored, the behaviour is controlled by the new + host_all_ignored option. + +PH/39 In a list of hosts for manualroute, if one item (either because of multi- + homing or because of multiple MX records with /mx) generated more than + one IP address, and the following item turned out to be the local host, + all the secondary addresses of the first item were incorrectly removed + from the list, along with the local host and any following hosts (which + is what is supposed to happen). + +PH/40 When Exim receives a message, it writes the login name, uid, and gid of + whoever called Exim into the -H file. In the case of the daemon it was + behaving confusingly. When first started, it used values for whoever + started the daemon, but after a SIGHUP it used the Exim user (because it + calls itself on a restart). I have changed the code so that it now always + uses the Exim user. + +PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a + message are rejected with the same error (e.g. no authentication or bad + sender address), and a DATA command is nevertheless sent (as can happen + with PIPELINING or a stupid MUA), the error message that was given to the + RCPT commands is included in the rejection of the DATA command. This is + intended to be helpful for MUAs that show only the final error to their + users. + +PH/42 Another patch from the Sieve maintainer. + +SC/02 Eximstats - Differentiate between permanent and temporary rejects. + Eximstats - Fixed some broken HTML links and added missing column headers + (Jez Hancock). + Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email + columns for Rejects, Temp Rejects, Ham, and Spam rows. + +SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables. + +PH/43 Yet another patch from the Sieve maintainer. + +PH/44 I found a way to check for a TCP/IP connection going away before sending + the response to the final '.' that terminates a message, but only in the + case where the client has not sent further data following the '.' + (unfortunately, this is allowed). However, in many cases there won't be + any further data because there won't be any more messages to send. A call + to select() can be used: if it shows that the input is "ready", there is + either input waiting, or the socket has been closed. An attempt to read + the next input character can distinguish the two cases. Previously, Exim + would have sent an OK response which the client would never have see. + This could lead to message repetition. This fix should cure that, at + least in a lot of common cases. + +PH/45 Do not advertise STARTTLS in response to HELP unless it would be + advertised in response to EHLO. + + +Exim version 4.66 +----------------- + +PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one + fixed by 4.65/MH/01 (is this a record?) are fixed: + + (i) An empty string was always treated as zero by the numeric comparison + operators. This behaviour has been restored. + + (ii) It is documented that the numeric comparison operators always treat + their arguments as decimal numbers. This was broken in that numbers + starting with 0 were being interpreted as octal. + + While fixing these problems I realized that there was another issue that + hadn't been noticed. Values of message_size_limit (both the global option + and the transport option) were treated as octal if they started with 0. + The documentation was vague. These values are now always treated as + decimal, and I will make that clear in the documentation. + + +Exim version 4.65 +----------------- + +TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with + Linux large file support (_FILE_OFFSET_BITS=64) on older glibc + versions. (#438) + +MH/01 Don't check that the operands of numeric comparison operators are + integers when their expansion is in "skipping" mode (fixes bug + introduced by 4.64-PH/07). + +PH/01 If a system filter or a router generates more than SHRT_MAX (32767) + child addresses, Exim now panics and dies. Previously, because the count + is held in a short int, deliveries were likely to be lost. As such a + large number of recipients for a single message is ridiculous + (performance will be very, very poor), I have chosen to impose a limit + rather than extend the field. + + Exim version 4.64 ----------------- @@ -266,6 +905,99 @@ PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch). PH/42 Give an error if -q is specified more than once. +PH/43 Renamed the variables $interface_address and $interface_port as + $received_ip_address and $received_port, to make it clear that these + values apply to message reception, and not to the outgoing interface when + a message is delivered. (The old names remain recognized, of course.) + +PH/44 There was no timeout on the connect() call when using a Unix domain + socket in the ${readsocket expansion. There now is. + +PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to + be meaningful with "accept". + +SC/01 Eximstats V1.43 + Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear. + +SC/02 Eximstats V1.44 + Use a glob alias rather than an array ref in the generated + parser. This improves both readability and performance. + +SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell) + Collect SpamAssassin and rejection statistics. + Don't display local sender or destination tables unless + there is data to show. + Added average volumes into the top table text output. + +SC/04 Eximstats V1.46 + Collect data on the number of addresses (recipients) + as well as the number of messages. + +SC/05 Eximstats V1.47 + Added 'Message too big' to the list of mail rejection + reasons (thanks to Marco Gaiarin). + +SC/06 Eximstats V1.48 + Mainlog lines which have GMT offsets and are too short to + have a flag are now skipped. + +SC/07 Eximstats V1.49 (Alain Williams) + Added the -emptyok flag. + +SC/08 Eximstats V1.50 + Fixes for obtaining the IP address from reject messages. + +JJ/03 exipick.20061117.2, made header handling as similar to exim as possible + (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed + whitesspace changes from 4.64-PH/27 + +JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to + match 4.64-PH/13 + +JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria + are found, allow negative numbers in numeric criteria) + +JJ/06 exipick.20061117.2, added new $message_body_missing variable + +JJ/07 exipick.20061117.2, added $received_ip_address and $received_port + to match changes made in 4.64-PH/43 + +PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm. + +PH/47 Put in an explicit test for a DNS lookup of an address record where the + "domain" is actually an IP address, and force a failure. This locks out + those revolvers/nameservers that support "A-for-A" lookups, in + contravention of the specifications. + +PH/48 When a host name was looked up from an IP address, and the subsequent + forward lookup of the name timed out, the host name was left in + $sender_host_name, contrary to the specification. + +PH/49 Although default lookup types such as lsearch* or cdb*@ have always been + restricted to single-key lookups, Exim was not diagnosing an error if + * or *@ was used with a query-style lookup. + +PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024. + +MH/01 local_scan ABI version incremented to 1.1. It should have been updated + long ago, but noone interested enough thought of it. Let's just say that + the "1.1" means that there are some new functions that weren't there at + some point in the past. + +PH/51 Error processing for expansion failure of helo_data from an smtp + transport during callout processing was broken. + +PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be + tested/used via the -bh/-bhc/-bs options. + +PH/53 Added missing "#include " to pcre/pcretest.c (this was a PCRE + bug, fixed in subsequent PCRE releases). + +PH/54 Applied Robert Bannocks' patch to avoid a problem with references that + arises when using the Solaris LDAP libraries (but not with OpenLDAP). + +PH/55 Check for a ridiculously long file name in exim_dbmbuild. + Exim version 4.63 -----------------