X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/36a3b0416e0bed61d78e44f119cdafb1fde941ba..a86229cf39b952455a30a720778838d18ef49fff:/doc/doc-txt/ChangeLog diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index fb88fa9e1..8773e24f4 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,47 +1,1192 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.91 2005/03/15 14:09:12 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.316 2006/02/28 14:54:54 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.61 +----------------- + +PH/01 The code for finding all the local interface addresses on a FreeBSD + system running IPv6 was broken. This may well have applied to all BSD + systems, as well as to others that have similar system calls. The broken + code found IPv4 interfaces correctly, but gave incorrect values for the + IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was + that it would not match correctly against @[] and not recognize the IPv6 + addresses as local. + +PH/02 The ipliteral router was not recognizing addresses of the form user@ + [ipv6:....] because it didn't know about the "ipv6:" prefix. + +PH/03 Added disable_ipv6. + +PH/04 Changed $reply_address to use the raw form of the headers instead of the + decoded form, because it is most often used to construct To: headers + lines in autoreplies, and the decoded form may well be syntactically + invalid. However, $reply_address has leading white space removed, and all + newlines turned into spaces so that the autoreply transport does not + grumble. + +PH/05 If group was specified without a user on a router, and no group or user + was specified on a transport, the group from the router was ignored. + +PH/06 Increased the number of ACL variables to 20 of each type, and arranged + for visible compile-time settings that can be used to change these + numbers, for those that want even more. Backwards compatibility with old + spool files has been maintained. However, going back to a previous Exim + release will lost any variables that are in spool files. + +PH/07 Two small changes when running in the test harness: increase delay when + passing a TCP/IP connection to a new process, in case the original + process has to generate a bounce, and remove special handling of + 127.0.0.2 (sic), which is no longer necessary. + +PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to + be the same on different OS. + +PH/09 Moved a debug statement in filter processing to avoid a race problem when + testing. + +JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:" + whether --show-vars was specified or not + +JJ/02 exipick: Added support for new ACL variable spool format introduced + in 4.61-PH/06 + +PH/10 Fixed another bug related to PH/04 above: if an incoming message had a + syntactically invalid From: or Reply-to: line, and a filter used this to + generate an autoreply, and therefore failed to obtain an address for the + autoreply, Exim could try to deliver to a non-existent relative file + name, causing unrelated and misleading errors. What now happens is that + it logs this as a hard delivery error, but does not attempt to create a + bounce message. + +PH/11 The exinext utility has a -C option for testing purposes, but although + the given file was scanned by exinext itself; it wasn't being passed on + when Exim was called. + +PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as + an end-of-file indication when reading a command response. + +PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was + compiled. In many other places in Exim, IPv6 addresses are always + recognized, so I have changed this. It also means that IPv4 domain + literals of the form [IPV4:n.n.n.n] are now always recognized. + +PH/14 When a uid/gid is specified for the queryprogram router, it cannot be + used if the router is not running as root, for example, when verifying at + ACL time, or when using -bh. The debugging output from this situation was + non-existent - all you got was a failure to exec. I have made two + changes: + + (a) Failures to set uid/gid, the current directory, or a process leader + in a subprocess such as that created by queryprogram now generate + suitable debugging ouput when -d is set. + + (b) The queryprogram router detects when it is not running as root, + outputs suitable debugging information if -d is set, and then runs + the subprocess without attempting to change uid/gid. + +PH/15 Minor change to Makefile for building test_host (undocumented testing + feature). + +PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the + additional section of a DNS packet that returns MX or SRV records. + Instead, it always explicitly searches for A/AAAA records. This avoids + major problems that occur when a DNS server includes only records of one + type (A or AAAA) in an MX/SRV packet. A byproduct of this change has + fixed another bug: if SRV records were looked up and the corresponding + address records were *not* found in the additional section, the port + values from the SRV records were lost. + +PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not + using the correct key (the original address) when searching the retry + rules in order to find which one to use for generating the retry hint. + +PH/18 If quota_warn_message contains a From: header, Exim now refrains from + adding the default one. Similarly, if it contains a Reply-To: header, the + errors_reply_to option, if set, is not used. + +PH/19 When calculating a retry time, Exim used to measure the "time since + failure" by looking at the "first failed" field in the retry record. Now + it does not use this if it is later than than the arrival time of the + message. Instead it uses the arrival time. This makes for better + behaviour in cases where some deliveries succeed, thus re-setting the + "first failed" field. An example is a quota failure for a huge message + when small messages continue to be delivered. Without this change, the + "time since failure" will always be short, possible causing more frequent + delivery attempts for the huge message than are intended. + +PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as + $1, $2, $3) because the numerical variables can be reset during some + expansion items (e.g. "match"), thereby losing the authentication data. + +PH/21 Make -bV show the size of off_t variables so that the test suite can + decide whether to run tests for quotas > 2G. + +PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold, + mailbox_size, and mailbox_filecount in the appendfile transport. If a + filecount value is greater than 2G or if a quota value is greater than 2G + on a system where the size of off_t is not greater than 4, a panic error + is given. + +PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can + never match. The debug and -bh output now contains an explicit error + message indicating a malformed IPv4 address or mask. + +PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address + 1.2.3.4 without a mask. Now it is not recognized as an IP address, and + PH/23 above applies. + +PH/25 Do not write to syslog when running in the test harness. The only + occasion when this arises is a failure to open the main or panic logs + (for which there is an explicit test). + +PH/26 Added the /no_tell option to "control=freeze". + +PH/27 If a host name lookup failed very early in a connection, for example, if + the IP address matched host_lookup and the reverse lookup yielded a name + that did not have a forward lookup, an error message of the form "no IP + address found for host xxx.xxx.xxx (during SMTP connection from NULL)" + could be logged. Now it outputs the IP address instead of "NULL". + +PH/28 An enabling patch from MH: add new function child_open_exim2() which + allows the sender and the authenticated sender to be set when + submitting a message from within Exim. Since child_open_exim() is + documented for local_scan(), the new function should be too. + +PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being + ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that + results in an empty string is now treated as unset. + +PH/30 Fix eximon buffer overflow bug (Bugzilla #73). + +PH/31 Added sender_verify_fail logging option. + +PH/32 In November 2003, the code in Exim that added an empty Bcc: header when + needed by RFC 822 but not by RFC 2822 was commented out. I have now + tidied the source and removed it altogether. + +PH/33 When a queue run was abandoned because the load average was too high, a + log line was always written; now it is written only if the queue_run log + selector is set. In addition, the log line for abandonment now contains + information about the queue run such as the pid. This is always present + in "start" and "stop" lines but was omitted from the "abandon" line. + +PH/34 Omit spaces between a header name and the colon in the error message that + is given when verify = headers_syntax fails (if there are lots of them, + the message gets confusing). + +PH/35 Change the default for dns_check_names_pattern to allow slashes within + names, as there are now some PTR records that contain slashes. This check + is only to protect against broken name servers that fall over on strange + characters, so the fact that it applies to all lookups doesn't matter. + +PH/36 Now that the new test suite is complete, we can remove some of the + special code in Exim that was needed for the old test suite. For example, + sorting DNS records because real resolvers return them in an arbitrary + order. The new test suite's fake resolver always returns records in the + same order. + +PH/37 When running in the test harness, use -odi for submitted messages (e.g. + bounces) except when queue_only is set, to avoid logging races between + the different processes. + +PH/38 Panic-die if .include specifies a non-absolute path. + +PH/39 A tweak to the "H" retry rule from its user. + +JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified + a label. They prevented compilation on older perls. + +JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused + a warning to be raised on newish perls. + +JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages + on queue. Changes to match documented behaviour of showing count of + messages matching specified criteria. + +PH/40 Changed the default ident timeout from 30s to 5s. + +PH/41 Added support for the use of login_cap features, on those BSD systems + that have them, for controlling the resources used by pipe deliveries. + +PH/42 The content-scanning code uses fopen() to create files in which to put + message data. Previously it was not paying any attention to the mode of + the files. Exim runs with umask(0) because the rest of the code creates + files with open(), and sets the required mode explicitly. Thus, these + files were ending up world-writeable. This was not a big issue, because, + being within the spool directory, they were not world-accessible. I have + created a function called modefopen, which takes an additional mode + argument. It sets umask(777), creates the file, chmods it to the required + mode, then resets the umask. All the relevant calls to fopen() in the + content scanning code have been changed to use this function. + +PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset + to 24 hours. This avoids potential overflow problems when processing G + and H retry rules. I suspect nobody ever tinkers with this value. + +PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile. + +PH/45 When the plaintext authenticator is running as a client, the server's + challenges are checked to ensure they are valid base64 strings. By + default, the authentication attempt is cancelled if an invalid string is + received. Setting client_ignore_invalid_base64 true ignores these errors. + The decoded challenge strings are now placed in $auth1, $auth2, etc. as + they are received. Thus, the responses can be made to depend on the + challenges. If an invalid string is ignored, an empty string is placed in + the variable. + +PH/46 Messages that are created by the autoreply transport now contains a + References: header, in accordance with RFCs 2822 and 3834. + +PH/47 Added authenticated_sender_force to the smtp transport. + +PH/48 The ${prvs expansion was broken on systems where time_t was long long. + + +Exim version 4.60 +----------------- + +PH/01 Two changes to the default runtime configuration: + + (1) Move the checks for relay_from_hosts and authenticated clients from + after to before the (commented out) DNS black list checks. + + (2) Add control=submission to the relay_from_hosts and authenticated + clients checks, on the grounds that messages accepted by these + statements are most likely to be submissions. + +PH/02 Several tidies to the handling of ${prvs and ${prvscheck: + + (1) Generate an error if the third argument for the ${prvs expansion is + not a single digit. + + (2) Treat a missing third argument of ${prvscheck as if it were an empty + string. + + (3) Reset the variables that are obtained from the first argument of + ${prvscheck and used in the second argument before leaving the code, + because their memory is reclaimed, so using them afterwards may do + silly things. + + (4) Tidy up the code for expanding the arguments of ${prvscheck one by + one (it's much easier than Tom thought :-). + + (5) Because of (4), we can now allow for the use of $prvscheck_result + inside the third argument. + +PH/03 For some reason, the default setting of PATH when running a command from + a pipe transport was just "/usr/bin". I have changed it to + "/bin:/usr/bin". + +PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause + anything to be listed in the output from -bV. + +PH/05 When a filter generated an autoreply, the entire To: header line was + quoted in the delivery log line, like this: + + => >A.N.Other ... + + This has been changed so that it extracts the operative address. There + may be more than one such address. If so, they are comma-separated, like + this: + + => >ano@some.domain,ona@other.domain ... + +PH/06 When a client host used a correct literal IP address in a HELO or EHLO + command, (for example, EHLO [1.2.3.4]) and the client's IP address was + not being looked up in the rDNS to get a host name, Exim was showing the + IP address twice in Received: lines, even though the IP addresses were + identical. For example: + + Received: from [1.2.3.4] (helo=[1.2.3.4]) + + However, if the real host name was known, it was omitting the HELO data + if it matched the actual IP address. This has been tidied up so that it + doesn't show the same IP address twice. + +PH/07 When both +timestamp and +memory debugging was on, the value given by + $tod_xxx expansions could be wrong, because the tod_stamp() function was + called by the debug printing, thereby overwriting the timestamp buffer. + Debugging no longer uses the tod_stamp() function when +timestamp is set. + +PH/08 When the original message was included in an autoreply transport, it + always said "this is a copy of the message, including all the headers", + even if body_only or headers_only was set. It now gives an appropriate + message. + +PH/09 Applied a patch from the Sieve maintainer which: + + o fixes some comments + o adds the (disabled) notify extension core + o adds some debug output for the result of if/elsif tests + o points to the current vacation draft in the documentation + and documents the missing references header update + + and most important: + + o fixes a bug in processing the envelope test (when testing + multiple envelope elements, the last element determinted the + result) + +PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to + Electronic Mail") by including: + + Auto-submitted: auto-generated + + in the messages that it generates (bounce messages and others, such as + warnings). In the case of bounce messages for non-SMTP mesages, there was + also a typo: it was using "Auto_submitted" (underscore instead of + hyphen). Since every message generated by Exim is necessarily in response + to another message, thes have all been changed to: + + Auto-Submitted: auto-replied + + in accordance with these statements in the RFC: + + The auto-replied keyword: + + - SHOULD be used on messages sent in direct response to another + message by an automatic process, + + - MUST NOT be used on manually-generated messages, + + - MAY be used on Delivery Status Notifications (DSNs) and Message + Disposition Notifications (MDNs), + + - MUST NOT be used on messages generated by automatic or periodic + processes, except for messages which are automatic responses to + other messages. + +PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}" + to the default Received: header definition. + +PH/12 Added log selector acl_warn_skipped (default on). + +PH/13 After a successful wildlsearch lookup, discard the values of numeric + variables because (a) they are in the wrong storage pool and (b) even if + they were copied, it wouldn't work properly because of the caching. + +PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length + checking when decoding. Apparently there are clients that generate + overlong encoded strings. Why am I not surprised? + +PH/15 If the first argument of "${if match_address" was not empty, but did not + contain an "@" character, Exim crashed. Now it writes a panic log message + and treats the condition as false. + +PH/16 In autoreply, treat an empty string for "once" the same as unset. + +PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve + extension "envelope-auth". The code is finished and in agreement with + other implementations, but there is no documentation so far and in fact, + nobody wrote the draft yet. This extension is currently #undef'ed, thus + not changing the active code. + + Print executed "if" and "elsif" statements when debugging is used. This + helps a great deal to understand what a filter does. + + Document more things not specified clearly in RFC3028. I had all this + sorted out, when out of a sudden new issues came to my mind. Oops." + +PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists + (Bugzilla #53). + +PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated + canonical form (as documented). However, after a host name lookup from + the IP address, check_host() was doing a simple string comparison with + addresses acquired from the DNS when checking that the found name did + have the original IP as one of its addresses. Since any found IPv6 + addresses are likely to be in abbreviated form, the comparison could + fail. Luckily, there already exists a function for doing the comparison + by converting both addresses to binary, so now that is used instead of + the text comparison. + +PH/20 There was another similar case to PH/19, when a complete host name was + given in a host list; looking up its IP address could give an abbreviated + form, whereas the current host's name might or might not be abbreviated. + The same fix has been applied. + + +Exim version 4.54 +----------------- + +PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was + set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not. + It now does. + +PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on + the CVS lines, and there was a missing #if HAVE_IPV6 in host.c. + +PH/03 Typo: missing ".o" in src/pcre/Makefile. + +PH/04 Tighten up "personal" tests: Instead of testing for any "List-" + header line, restrict the check to what is listed in RFCs 2369 and 2929. + Also, for "Auto-Submitted", treat anything other than "no" as + non-personal, in accordance with RFC 3834. (Previously it treated + anything starting "auto-" as non-personal.) + +TF/01 The control=submission/name=... option had a problem with syntax + errors if the name included a slash character. The /name= option + now slurps the rest of the string, so it can include any characters + but it must come last in the list of options (after /sender_retain + or /domain=). + +PH/05 Some modifications to the interface to the fake nameserver for the new + testing suite. + + + +Exim version 4.53 +----------------- + +TK/01 Added the "success_on_redirect" address verification option. See + NewStuff for rationale and an example. + +PH/01 Added support for SQLite, basic code supplied by David Woodhouse. + +PH/02 Patch to exigrep to allow it to work on syslog lines. + +PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of + fread() to skip over the body file's header line, because in Cygwin the + header line is locked and is inaccessible. + +PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both + co-exist for some time) to make it clear that it is the Exim ID that is + referenced, not the Message-ID: header line. + +PH/05 Replaced all Tom's calls to snprintf() with calls to the internal + string_format() function, because snprintf() does not exist on all + operating systems. + +PH/06 The use of forbid_filter_existstest now also locks out the use of the + ${stat: expansion item. + +PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP + protocol synchronization error", to keep the pedants happy. + +PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as + well as for IRIX systems, when gcc is being used. See the host.c source + file for comments. + +PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer. + +PH/10 Named domain lists were not working if used in a queue_smtp_domains + setting. + +PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp + transport and to the smtp transport in LMTP mode. + +TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway). + +PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to + run a filter in a subprocess. This could lead to confusion in subsequent + lookups in the parent process. There should also be a search_tidyup() at + the end of the subprocess. + +PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true + only if the host matched helo_try_verify_hosts, which caused the + verification to occur when the EHLO/HELO command was issued. The ACL just + tested the remembered result. Now, if a previous verification attempt has + not happened, "verify = helo" does it there and then. + +JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04) + +TK/03 Fix log output including CR from clamd. + +PH/14 A reference to $reply_address when Reply-to: was empty and From: did not + exist provoked a memory error which could cause a segfault. + +PH/15 Installed PCRE 6.2 + +PH/17 Defined BIND_8_COMPAT in the Darwin os.h file. + +PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause + of the problem. Specifically, suggested +O2 rather than +O1 for the + HP-UX compiler. + +PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch). + +PH/20 If a delivery was routed to a non-standard port by means of an SRV + record, the port was not correctly logged when the outgoing_port log + selector was set (it logged the transort's default port). + +PH/21 Added support for host-specific ports to manualroute, queryprogram, + fallback_hosts, and "hosts" in the smtp transport. + +PH/22 If the log selector "outgoing_port" is set, the port is now also given on + host errors such as "Connection refused". + +PH/23 Applied a patch to fix problems with exim-4.52 while doing radius + authentication with radiusclient 0.4.9: + + - Error returned from rc_read_config was caught wrongly + - Username/password not passed on to radius server due to wrong length. + + The presumption is that some radiusclient API changes for 4.51/PH/17 + were not taken care of correctly. The code is still untested by me (my + Linux distribution still has 0.3.2 of radiusclient), but it was + contributed by a Radius user. + +PH/24 When doing a callout, the value of $domain wasn't set correctly when + expanding the "port" option of the smtp transport. + +TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met + while reading a MIME header. Thanks to Tom Hughes for a patch. + +PH/24 Include config.h inside local_scan.h so that configuration settings are + available. + +PH/25 Make $smtp_command_argument available after all SMTP commands. This means + that in an ACL for RCPT (for example), you can examine exactly what was + received. + +PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO + commands, but it was not correctly comparing the address with the actual + client host address. Thus, it would show the EHLO address in Received: + header lines when this was not necessary. + +PH/27 Added the % operator to ${eval:}. + +PH/28 Exim tries to create and chdir to its spool directory when it starts; + it should be ignoring failures (because with -C, for example, it has lost + privilege). It wasn't ignoring creation failures other than "already + exists". + +PH/29 Added "crypteq" to the list of supported features that Exim outputs when + -bV or -d is used. + +PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed + because an input line was too long, either on its own, or by virtue of + too many continuations, the temporary file was not being removed, and the + return code was incorrect. + +PH/31 Missing "BOOL" in function definition in filtertest.c. + +PH/32 Applied Sieve patches from the maintainer. + +TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67. + +PH/33 Added "verify = not_blind". + +PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in + Local/Makefile (with some defaults set). These are used in built scripts + such as exicyclog, but they have never been used in the exim_install + script (though there are many overriding facilities there). I have + arranged that the exim_install script now takes note of these two + settings. + +PH/35 Installed configuration files for Dragonfly. + +PH/36 When a locally submitted message by a trusted user did not contain a + From: header, and the sender address was obtained from -f or from an SMTP + MAIL command, and the trusted user did not use -F to supply a sender + name, $originator_name was incorrectly used when constructing a From: + header. Furthermore, $originator_name was used for submission mode + messages from external hosts without From: headers in a similar way, + which is clearly wrong. + +PH/37 Added control=suppress_local_fixups. + +PH/38 When log_selector = +received_sender was set, and the addition of the + sender made the log line's construction buffer exactly full, or one byte + less than full, an overflow happened when the terminating "\n" was + subsequently added. + +PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry + when the result of a list match is failure because a DNS lookup failed. + +PH/40 RM_COMMAND is now used in the building process. + +PH/41 Added a "distclean" target to the top-level Makefile; it deletes all + the "build-* directories that it finds. + +PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP + address in a domain literal was a prefix of an interface address. + +PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains + when verifying a sender address, unless rewrite_headers is false. + +PH/44 Wrote a long comment about why errors_to addresses are verified as + recipients, not senders. + +TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when + the ratelimit ACL was added. + +PH/45 Added $smtp_command for the full command (cf $smtp_command_argument). + +PH/46 Added extra information about PostgreSQL errors to the error string. + +PH/47 Added an interface to a fake DNS resolver for use by the new test suite, + avoiding the need to install special zones in a real server. This is + backwards compatible; if it can't find the fake resolver, it drops back. + Thus, both old and new test suites can be run. + +TF/02 Added util/ratelimit.pl + +TF/03 Minor fix to the ratelimit code to improve its behaviour in case the + clock is set back in time. + +TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian + Candler . + +TF/05 The fix for PH/43 was not completely correct; widen_domains is always + OK for addresses that are the result of redirections. + +PH/48 A number of further additions for the benefit of the new test suite, + including a fake gethostbyname() that interfaces to the fake DNS resolver + (see PH/47 above). + +TF/06 The fix for widen_domains has also been applied to qualify_single and + search_parents which are the other dnslookup options that can cause + header rewrites. + +PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter + type ("H"). + +PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable. + +TF/07 Exim produced the error message "an SRV record indicated no SMTP + service" if it encountered an MX record with an empty target hostname. + The message is now "an MX or SRV record indicated no SMTP service". + +TF/08 Change PH/13 introduced the possibility that verify=helo may defer, + if the DNS of the sending site is misconfigured. This is quite a + common situation. This change restores the behaviour of treating a + helo verification defer as a failure. + +PH/51 If self=fail was set on a router, the bounce message did not include the + actual error message. + + +Exim version 4.52 +----------------- + +TF/01 Added support for Client SMTP Authorization. See NewStuff for details. + +PH/01 When a transport filter timed out in a pipe delivery, and the pipe + command itself ended in error, the underlying message about the transport + filter timeout was being overwritten with the pipe command error. Now the + underlying error message should be appended to the second error message. + +TK/01 Fix poll() being unavailable on Mac OSX 10.2. + +PH/02 Reduce the amount of output that "make" produces by default. Full output + can still be requested. + +PH/03 The warning log line about a condition test deferring for a "warn" verb + was being output only once per connection, rather than after each + occurrence (because it was using the same function as for successful + "warn" verbs). This seems wrong, so I have changed it. + +TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that + it should not have, which might have caused a crash in the right + circumstances, but probably never did. + +PH/04 Installed a modified version of Tony Finch's patch to make submission + mode fix the return path as well as the Sender: header line, and to + add a /name= option so that you can make the user's friendly name appear + in the header line. + +TF/03 Added the control = fakedefer ACL modifier. + +TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to + Mark Lowes for thorough testing. + +TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0. + +TK/03 Merged latest SRS patch from Miles Wilton. + +PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts + with the definition in sysexits.h (which is #included earlier). + Fortunately, Exim does not actually use EX_OK. The code used to try to + preserve the sysexits.h value, by assumimg that macro definitions were + scanned for macro replacements. I have been disabused of this notion, + so now the code just undefines EX_OK before #including unistd.h. + +PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout + in the smtp transport. When a block could not be written in a single + write() function, the timeout was being re-applied to each part-write. + This seems wrong - if the receiver was accepting one byte at a time it + would take for ever. The timeout is now adjusted when this happens. It + doesn't have to be particularly precise. + +TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for + details. Thanks to Chris Webb for the patch! + +PH/07 Added "fullpostmaster" verify option, which does a check to + without a domain if the check to fails. + +SC/01 Eximstats: added -xls and the ability to specify output files + (patch written by Frank Heydlauf). + +SC/02 Eximstats: use FileHandles for outputing results. + +SC/03 Eximstats: allow any combination of xls, txt, and html output. + +SC/04 Eximstats: fixed display of large numbers with -nvr option + +SC/05 Eximstats: fixed merging of reports with empty tables. + +SC/06 Eximstats: added the -include_original_destination flag + +SC/07 Eximstats: removed tabs and trailing whitespace. + +TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller. + +TK/06 MBOX spool code: Add real "From " MBOX separator line + so the .eml file is really in mbox format (even though + most programs do not really care). Patch from Alex Miller. + +TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers. + The latter is generated from $received_to and is only set if the + message has one envelope recipient. SA can use these headers, + obviously out-of-the-box. Patch from Alex Miller. + +PH/08 The ${def test on a variable was returning false if the variable's + value was "0", contrary to what the specification has always said! + The result should be true unless the variable is empty. + +PH/09 The syntax error of a character other than { following "${if + def:variable_name" (after optional whitespace) was not being diagnosed. + An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an + accidental colon was present, for example, could give incorrect results. + +PH/10 Tidied the code in a number of places where the st_size field of a stat() + result is used (not including appendfile, where other changes are about + to be made). + +PH/11 Upgraded appendfile so that quotas larger than 2G are now supported. + This involved changing a lot of size variables from int to off_t. It + should work with maildirs and everything. + +TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of + spamd dying while we are connected to it. + +TF/05 Fixed a ${extract error message typo reported by Jeremy Harris + + +PH/12 Applied Alex Kiernan's patch for the API change for the error callback + function for BDB 4.3. + +PH/13 Changed auto_thaw such that it does not apply to bounce messages. + +PH/14 Imported PCRE 6.0; this was more than just a trivial operation because + the sources for PCRE have been re-arranged and more files are now + involved. + +PH/15 The code I had for printing potentially long long variables in PH/11 + above was not the best (it lost precision). The length of off_t variables + is now inspected at build time, and an appropriate printing format (%ld + or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T + to be "long long int" or "long int". This is needed for the internal + formatting function string_vformat(). + +PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in + the configuration file to be ":syslog", then the script "guesses" where + the logs files are, rather than using the compiled in default. In our + case the guess is not the same as the compiled default, so the script + suddenly stopped working when I started to use syslog. The patch checks + to see if log_file_path is "". If so, it attempts to read it from exim + with no configuration file to get the compiled in version, before it + falls back to the previous guessing code." + +TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with + implementing BATV in an Exim configuration. See NewStuff for the gory + details. + +PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and + Makefile that are specific to HP-UX. + +PH/18 If the "use_postmaster" option was set for a recipient callout together + with the "random" option, the postmaster address was used as the MAIL + FROM address for the random test, but not for the subsequent recipient + test. It is now used for both. + +PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The + patch removes a few documentation additions to RFC 3028, because the + latest draft now contains them. It adds the new en;ascii-case comparator + and a new error check for 8bit text in MIME parts. Comparator and + require names are now matched exactly. I enabled the subaddress + extension, but it is not well tested yet (read: it works for me)." + +PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to + rework some of the code of TK/09 above to avoid the hardwired use of + "%lld" and "long long". Replaced the call to snprintf() with a call to + string_vformat(). + +PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX + records point to non-existent hosts", "retry timeout exceeded", and + "retry time not reached for any host after a long failure period". + +PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with + experimental DomainKeys support: + + (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken. + (2) On an error such as an illegally used "control", the wrong name for + the control was given. + + These problems did NOT occur unless DomainKeys support was compiled. + +PH/23 Added daemon_startup_retries and daemon_startup_sleep. + +PH/24 Added ${if match_ip condition. + +PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints + databases so that it will be absolutely obvious if a crash occurs in the + DB library. This is a regular occurrence (often caused by mis-matched + db.h files). + +PH/26 Insert a lot of missing (void) casts for functions such as chown(), + chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were + picked up on a user's system that detects such things. There doesn't seem + to be a gcc warning option for this - only an attribute that has to be + put on the function's prototype. It seems that in Fedora Core 4 they have + set this on a number of new functions. No doubt there will be more in due + course. + +PH/27 If a dnslookup or manualroute router is set with verify=only, it need not + specify a transport. However, if an address that was verified by such a + router was the subject of a callout, Exim crashed because it tried to + read the rcpt_include_affixes from the non-existent transport. Now it + just assumes that the setting of that option is false. This bug was + introduced by 4.51/PH/31. + +PH/28 Changed -d+all to exclude +memory, because that information is very + rarely of interest, but it makes the output a lot bigger. People tend to + do -d+all out of habit. + +PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the + code in os-type was giving problems when libc.so lives in lib64, like on + x86_64 Fedora Core. + +PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These + aren't the modern standard, and it seems that some systems' include files + don't always have them. Exim was already checking for some of the newer + ones like T_AAAA, and defining it itself. I've added checks for all the + record types that Exim uses. + +PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was + not automatically generating a new one, as it is supposed to. This + prevented TLS from working. If the file did exist, but contained invalid + data, a new version was generated, as expected. It was only the case of a + non-existent file that was broken. + +TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction + with a change in libdomainkeys > 0.64. + +TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved + from DNS. If the selector record carries the flag, it now has + precedence over the domain-wide flag. + +TK/12 Cleared some compiler warnings related to SPF, SRS and DK code. + +PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as + the use of a port name that isn't defined in /etc/services) occurred, the + message was deferred as in a normal delivery, and thus remained on the + spool, instead of being failed because of the mua_wrapper setting. This + is now fixed, and I tidied up some of the mua_wrapper messages at the + same time. + +SC/08 Eximstats: whilst parsing the mainlog(s), store information about + the messages in a hash of arrays rather than using individual hashes. + This is a bit cleaner and results in dramatic memory savings, albeit + at a slight CPU cost. + +SC/09 Eximstats: added the -show_rt and the -show_dt flags + as requested by Marc Sherman. + +SC/10 Eximstats: added histograms for user specified patterns as requested + by Marc Sherman. + +SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified. + +PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of + fopen() in the content-scanning modules that did not already have it. + Exim version 4.51 ----------------- -TK/01. Added Yahoo DomainKeys support via libdomainkeys. See - doc/experimental-spec.txt for details. (http://domainkeys.sf.net) - -TK/02. Fix ACL "control" statment not being available in MIME ACL. - -TK/03. Fix ACL "regex" condition not being available in MIME ACL. - -PH/01. Installed a patch from the Sieve maintainer that allows -bf to be used - to test Sieve filters that use "vacation". - -PH/02. Installed a slightly modified version of Nikos Mavrogiannopoulos' patch - that changes the way the GnuTLS parameters are stored in the cache file. - The new format can be generated externally. For backward compatibility, - if the data in the cache doesn't make sense, Exim assumes it has read an - old-format file, and it generates new data and writes a new file. This - means that you can't go back to an older release without removing the - file. - -PH/03. A redirect router that has both "unseen" and "one_time" set does not - work if there are any delivery delays because "one_time" forces the - parent to be marked "delivered", so its unseen clone is never tried - again. For this reason, Exim now forbids the simultaneous setting of - these two options. - -PH/04. Change 4.11/85 fixed an obscure bug concerned with addresses that are - redirected to themselves ("homonym" addresses). Read the long ChangeLog - entry if you want to know the details. The fix, however, neglected to - consider the case when local delivery batching is involved. The test for - "previously delivered" was not happening when checking to see if an - address could be batched with a previous (undelivered) one; under - certain circumstances this could lead to multiple deliveries to the same - address. A one-line patch to add the appropriate test fixes the bug. - -PH/05. Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T - in its include files, and this causes problems building Exim. +TK/01 Added Yahoo DomainKeys support via libdomainkeys. See + doc/experimental-spec.txt for details. (http://domainkeys.sf.net) + +TK/02 Fix ACL "control" statement not being available in MIME ACL. + +TK/03 Fix ACL "regex" condition not being available in MIME ACL. + +PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used + to test Sieve filters that use "vacation". + +PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch + that changes the way the GnuTLS parameters are stored in the cache file. + The new format can be generated externally. For backward compatibility, + if the data in the cache doesn't make sense, Exim assumes it has read an + old-format file, and it generates new data and writes a new file. This + means that you can't go back to an older release without removing the + file. + +PH/03 A redirect router that has both "unseen" and "one_time" set does not + work if there are any delivery delays because "one_time" forces the + parent to be marked "delivered", so its unseen clone is never tried + again. For this reason, Exim now forbids the simultaneous setting of + these two options. + +PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are + redirected to themselves ("homonym" addresses). Read the long ChangeLog + entry if you want to know the details. The fix, however, neglected to + consider the case when local delivery batching is involved. The test for + "previously delivered" was not happening when checking to see if an + address could be batched with a previous (undelivered) one; under + certain circumstances this could lead to multiple deliveries to the same + address. + +PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T + in its include files, and this causes problems building Exim. + +PH/06 A number of "verify =" ACL conditions have no options (e.g. verify = + header_syntax) but Exim was just ignoring anything given after a slash. + In particular, this caused confusion with an attempt to use "verify = + reverse_host_lookup/defer_ok". An error is now given when options are + supplied for verify items that do not have them. (Maybe reverse_host_ + lookup should have a defer_ok option, but that's a different point.) + +PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as + defined by RFC 821) to 2048, because there were problems with some AUTH + commands, and RFC 1869 says the size should be increased for extended + SMTP commands that take arguments. + +PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony + Finch). + +PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an + "unknown" error; now it says that the functionality isn't in the binary. + +PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in + an address' error message when a string expansion fails (syntax or + whatever). Otherwise the password may appear in the log. Following change + PH/42 below, there is no longer a chance of it appearing in a bounce + message. + +PH/11 Installed exipick version 20050225.0 from John Jetmore. + +PH/12 If the last host in a fallback_hosts list was multihomed, only the first + of its addresses was ever tried. (Bugzilla bug #2.) + +PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed + the result incorrectly in the debug output. (It correctly added a newline + to what was transported.) + +TF/01 Added $received_time. + +PH/14 Modified the default configuration to add an acl_smtp_data ACL, with + commented out examples of how to interface to a virus scanner and to + SpamAssassin. Also added commented examples of av_scanner and + spamd_address settings. + +PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions + and controls are allowed in which ACLs. There were a couple of minor + errors. Some of the entries in the conditions table (which is a table of + where they are NOT allowed) were getting very unwieldy; rewrote them as a + negation of where the condition IS allowed. + +PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer. + +PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the + header file does not have a version number, so I've had to invent a new + value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new + API. The code is untested by me (my Linux distribution still has 0.3.2 of + radiusclient), but it was contributed by a Radius user. + +PH/18 Installed Lars Mainka's patch for the support of CRL collections in + files or directories, for OpenSSL. + +PH/19 When an Exim process that is running as root has to create an Exim log + file, it does so in a subprocess that runs as exim:exim so as to get the + ownership right at creation (otherwise, other Exim processes might see + the file with the wrong ownership). There was no test for failure of this + fork() call, which would lead to the process getting stuck as it waited + for a non-existent subprocess. Forks do occasionally fail when resources + run out. I reviewed all the other calls to fork(); they all seem to check + for failure. + +PH/20 When checking for unexpected SMTP input at connect time (before writing + the banner), Exim was not dealing correctly with a non-positive return + from the read() function. If the client had disconnected by this time, + the result was a log entry for a synchronization error with an empty + string after "input=" when read() returned zero. If read() returned -1 + (an event I could not check), uninitialized data bytes were printed. + There were reports of junk text (parts of files, etc) appearing after + "input=". + +PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages. + +PH/22 Added support for macro redefinition, and (re)definition in between + driver and ACL definitions. + +PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then + forgetting to use the resulting value; it was using the unexpanded value. + +PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it + hadn't been configured. The fix is from Juergen Kreileder, who + understands it better than I do: + + "Here's what I see happening with three configured cyrus_sasl + authenticators configured (plain, login, cram-md5): + + On startup auth_cyrus_sasl_init() gets called for each of these. + This means three calls to sasl_listmech() without a specified mech_list. + => SASL tests which mechs of all available mechs actually work + => three warnings about OTP not working + => the returned list contains: plain, login, cram-md5, digest-md5, ... + + With the patch, sasl_listmech() also gets called three times. But now + SASL's mech_list option is set to the server_mech specified in the the + authenticator. Or in other words, the answer from sasl_listmech() + gets limited to just the mech you're testing for (which is different + for each call.) + => the return list contains just 'plain' or 'login', 'cram-md5' or + nothing depending on the value of ob->server_mech. + + I've just tested the patch: Authentication still works fine, + unavailable mechs specified in the exim configuration are still + caught, and the auth.log warnings about OTP are gone." + +PH/25 When debugging is enabled, the contents of the command line are added + to the debugging output, even when log_selector=+arguments is not + specified. + +PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the + answer is "GNU", and only if the return is "GNU/something" is the answer + "Linux". + +PH/27 $acl_verify_message is now set immediately after the failure of a + verification in an ACL, and so is available in subsequent modifiers. In + particular, the message can be preserved by coding like this: + + warn !verify = sender + set acl_m0 = $acl_verify_message + + Previously, $acl_verify_message was set only while expanding "message" + and "log_message" when a very denied access. + +PH/28 Modified OS/os.c-Linux with + + -#ifndef OS_LOAD_AVERAGE + +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__) + + to make Exim compile on kfreebsd-gnu. (I'm totally confused about the + nomenclature these days.) + +PH/29 Installed patch from the Sieve maintainer that adds the options + sieve_useraddress and sieve_subaddress to the redirect router. + +PH/30 In these circumstances: + . Two addresses routed to the same list of hosts; + . First host does not offer TLS; + . First host accepts first address; + . First host gives temporary error to second address; + . Second host offers TLS and a TLS session is established; + . Second host accepts second address. + Exim incorrectly logged both deliveries with the TLS parameters (cipher + and peerdn, if requested) that were in fact used only for the second + address. + +PH/31 When doing a callout as part of verifying an address, Exim was not paying + attention to any local part prefix or suffix that was matched by the + router that accepted the address. It now behaves in the same way as it + does for delivery: the affixes are removed from the local part unless + rcpt_include_affixes is set on the transport. + +PH/32 Add the sender address, as F=<...>, to the log line when logging a + timeout during the DATA phase of an incoming message. + +PH/33 Sieve envelope tests were broken for match types other than :is. I have + applied a patch sanctioned by the Sieve maintainer. + +PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where + the uid or gid is negative. A case of a negative gid caused this to be + noticed. The fix allows for either to be negative. + +PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code + clutter, but the tables that are indexed by ACL_WHERE_xxx values had been + overlooked. + +PH/36 The change PH/12 above was broken. Fixed it. + +PH/37 Exim used to check for duplicate addresses in the middle of routing, on + the grounds that routing the same address twice would always produce the + same answer. This might have been true once, but it is certainly no + longer true now. Routing a child address may depend on the previous + routing that produced that child. Some complicated redirection strategies + went wrong when messages had multiple recipients, and made Exim's + behaviour dependent on the order in which the addresses were given. + + I have moved the duplicate checking until after the routing is complete. + Exim scans the addresses that are assigned to local and remote + transports, and removes any duplicates. This means that more work will be + done, as duplicates will always all be routed, but duplicates are + presumably rare, so I don't expect this is of any significance. + + For deliveries to pipes, files, and autoreplies, the duplicate checking + still happens during the routing process, since they are not going to be + routed further. + +PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner. + It corrects a timeout issue with spamd. This is Ian's comment: "The + background is that sometimes spamd either never reads data from a + connection it has accepted, or it never writes response data. The exiscan + spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it + blindly assumes that writes won't block so it may never time out." + +PH/39 Allow G after quota size as well as K and M. + +PH/40 The value set for $authenticated_id in an authenticator may not contain + binary zeroes or newlines because the value is written to log lines and + to spool files. There was no check on this. Now the value is run through + the string_printing() function so that such characters are converted to + printable escape sequences. + +PH/41 $message_linecount is a new variable that contains the total number of + lines in the message. Compare $body_linecount, which is the count for the + body only. + +PH/42 Exim no longer gives details of delivery errors for specific addresses in + bounce and delay warning messages, except in certain special cases, which + are as follows: + + (a) An SMTP error message from a remote host; + (b) A message specified in a :fail: redirection; + (c) A message specified in a "fail" command in a system filter; + (d) A message specified in a FAIL return from the queryprogram router; + (e) A message specified by the cannot_route_message router option. + + In these cases only, Exim does include the error details in bounce and + warning messages. There are also a few cases where bland messages such + as "unrouteable address" or "local delivery error" are given. + +PH/43 $value is now also set for the "else" part of a ${run expansion. + +PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still + being worked on, but at least Exim now implements the latest version to + play with." + +PH/45 In a pipe transport, although a timeout while waiting for the pipe + process to complete was treated as a delivery failure, a timeout while + writing the message to the pipe was logged, but erroneously treated as a + successful delivery. Such timeouts include transport filter timeouts. For + consistency with the overall process timeout, these timeouts are now + treated as errors, giving rise to delivery failures by default. However, + there is now a new Boolean option for the pipe transport called + timeout_defer, which, if set TRUE, converts the failures into defers for + both kinds of timeout. A transport filter timeout is now identified in + the log output. + +PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On + systems where "make" and "gmake" are different, calling "gmake" at top + level broke things. I've arranged for the value of $(MAKE) to be passed + from the Makefile to this script so that it can call the same version of + "make". A note about Exim versions 4.44 and 4.50