X-Git-Url: https://git.exim.org/users/jgh/exim.git/blobdiff_plain/23a217d97daf7e76ff6f586af43d13892fafa42b..ced52486fd4051db23331ab91c988c07f627e076:/test/runtest

diff --git a/test/runtest b/test/runtest
index 0021f3ecc..3b572c155 100755
--- a/test/runtest
+++ b/test/runtest
@@ -460,7 +460,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     {
     my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
     $expired = '' if !defined $expired;
-    my($increment) = date_seconds($date3) - date_seconds($date2);
+
+    # Round the time-difference up to nearest even value
+    my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
 
     # We used to use globally unique replacement values, but timing
     # differences make this impossible. Just show the increment on the
@@ -474,6 +476,13 @@ RESET_AFTER_EXTRA_LINE_READ:
   # more_errno values in exim_dumpdb output which are times
   s/T:(\S+)\s-22\s(\S+)\s/T:$1 -22 xxxx /;
 
+  # port numbers in dumpdb output
+  s/T:([a-z.]+(:[0-9.]+)?):$parm_port_n /T:$1:PORT_N /;
+
+  # port numbers in stderr
+  s/^set_process_info: .*\]:\K$parm_port_d /PORT_D /;
+  s/^set_process_info: .*\]:\K$parm_port_s /PORT_S /;
+
 
   # ======== Dates and times ========
 
@@ -485,10 +494,22 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Date/time in header lines and SMTP responses
   s/[A-Z][a-z]{2},\s\d\d?\s[A-Z][a-z]{2}\s\d\d\d\d\s\d\d\:\d\d:\d\d\s[-+]\d{4}
     /Tue, 2 Mar 1999 09:44:33 +0000/gx;
+  # and in a French locale
+  s/\S{4},\s\d\d?\s[^,]+\s\d\d\d\d\s\d\d\:\d\d:\d\d\s[-+]\d{4}
+    /dim., 10 f\xE9vr 2019 20:05:49 +0000/gx;
 
   # Date/time in logs and in one instance of a filter test
-  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?/1999-03-02 09:44:33/gx;
+  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d(\s[+-]\d\d\d\d)?\s/1999-03-02 09:44:33 /gx;
+  s/^\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}(\s[+-]\d\d\d\d)?\s/2017-07-30 18:51:05.712 /gx;
   s/^Logwrite\s"\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Logwrite "1999-03-02 09:44:33/gx;
+  # Date/time in syslog test
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s/2017-07-30 18:51:05 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s/2017-07-30 18:51:05.712 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\s[+-]\d\d\d\d\s/2017-07-30 18:51:05 +9999 /gx;
+  s/^SYSLOG:\s\'\K\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\.\d{3}\s[+-]\d\d\d\d\s/2017-07-30 18:51:05.712 +9999 /gx;
+
+  s/((D|[RQD]T)=)\d+s/$1qqs/g;
+  s/((D|[RQD]T)=)\d\.\d{3}s/$1q.qqqs/g;
 
   # Date/time in message separators
   s/(?:[A-Z][a-z]{2}\s){2}\d\d\s\d\d:\d\d:\d\d\s\d\d\d\d
@@ -506,7 +527,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     my($next) = $3 - $2;
     $_ = "  first failed=dddd last try=dddd next try=+$next $4\n";
     }
-  s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\d)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+  s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
   s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
 
   # Time to retry may vary
@@ -517,9 +538,6 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Date/time in exim -bV output
   s/\d\d-[A-Z][a-z]{2}-\d{4}\s\d\d:\d\d:\d\d/07-Mar-2000 12:21:52/g;
 
-  # Time on queue tolerance
-  s/(QT|D)=1s/$1=0s/;
-
   # Eximstats heading
   s/Exim\sstatistics\sfrom\s\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d\sto\s
     \d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
@@ -529,33 +547,64 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/(could not connect to .*: Connection) reset by peer$/$1 refused/;
 
   # ======== TLS certificate algorithms ========
+  #
+  # In Received: headers, convert RFC 8314 style ciphersuite to
+  # the older (comment) style, keeping only the Auth element
+  # (discarding kex, cipher, mac).  For TLS 1.3 there is no kex
+  # element (and no _WITH); insert a spurious "RSA".
+
+  s/^\s+by .+ with .+ \K tls TLS_.*?([^_]+)_WITH.+$/(TLS1.x:ke-$1-AES256-SHAnnn:xxx)/;
+  s/^\s+by .+ with .+ \K tls TLS_.+$/(TLS1.x:ke-RSA-AES256-SHAnnn:xxx)/;
+
   # Test machines might have various different TLS library versions supporting
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
+  #
+  # TLSversion : KeyExchange? - Authentication/Signature - C_iph_er - MAC : ???
+  #
   # So far, have seen:
   #   TLSv1:AES128-GCM-SHA256:128
   #   TLSv1:AES256-SHA:256
   #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1.2:DHE-RSA-AES256-SHA:256
+  #   TLSv1.3:TLS_AES_256_GCM_SHA384:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   # We also need to handle the ciphersuite without the TLS part present, for
   # client-ssl's output.  We also see some older forced ciphersuites, but
   # negotiating TLS 1.2 instead of 1.0.
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
+  #
+  # Retain the authentication algorith field as we want to test that.
 
-  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
-  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
-  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
-  s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
-  s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
+  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1(\.[123])?:/$1TLS1.x:/xg;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA)(?!:)/ke-$3-AES256-SHAnnn/g;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-AES(128|256)-(GCM-SHA(256|384)|SHA):(128|256)/ke-$3-AES256-SHAnnn:xxx/g;
+
+  # OpenSSL TLSv1.3 - unsure what to do about the authentication-variant testcases now,
+  # as it seems the protocol no longer supports a user choice.  Replace the "TLS" field with "RSA".
+  # Also insert a key-exchange field for back-compat, even though 1.3 doesn't do that.
+  #
+  # TLSversion : "TLS" - C_iph_er - MAC : ???
+  #
+  s/TLS_AES(_256)?_GCM_SHA384(?!:)/ke-RSA-AES256-SHAnnn/g;
+  s/:TLS_AES(_256)?_GCM_SHA384:256/:ke-RSA-AES256-SHAnnn:xxx/g;
 
   # LibreSSL
+  # TLSv1:AES256-GCM-SHA384:256
   # TLSv1:ECDHE-RSA-CHACHA20-POLY1305:256
-  s/\bECDHE-RSA-CHACHA20-POLY1305\b/AES256-SHA/g;
+  #
+  # ECDHE-RSA-CHACHA20-POLY1305
+  # AES256-GCM-SHA384
+
+  s/(?<!-)(AES256-GCM-SHA384)/RSA-$1/;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305)(?!:)/ke-$3-AES256-SHAnnn/g;
+  s/(?<!ke-)((EC)?DHE-)?(RSA|ECDSA)-(AES256|CHACHA20)-(GCM-SHA384|POLY1305):256/ke-$3-AES256-SHAnnn:xxx/g;
 
   # GnuTLS have seen:
+  #   TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256
+  #
   #   TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
   #   TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
   #   TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
@@ -570,14 +619,15 @@ RESET_AFTER_EXTRA_LINE_READ:
   #   DHE-RSA-AES256-SHA256
   #   DHE-RSA-AES256-SHA
   # picking latter as canonical simply because regex easier that way.
-  s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
-  s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
-  s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+  s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA-AES256-SHA1:256/g;
+  s/TLS1.[0123]:((EC)?DHE_)?(RSA|ECDSA)_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:ke-$3-AES256-SHAnnn:xxx/g;
+  s/\b(ECDHE-(RSA|ECDSA)-AES256-SHA|DHE-RSA-AES256-SHA256)\b/ke-$2-AES256-SHAnnn/g;
 
   # GnuTLS library error message changes
   s/No certificate was found/The peer did not send any certificate/g;
 #(dodgy test?)  s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
   s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+  s/\(gnutls_handshake\): \KNo supported cipher suites have been found.$/Could not negotiate a supported cipher suite./;
 
   # (this new one is a generic channel-read error, but the testsuite
   # only hits it in one place)
@@ -653,7 +703,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   s/\bgid=\d+/gid=gggg/;
   s/\begid=\d+/egid=gggg/;
-  s/\bpid=\d+/pid=pppp/;
+  s/\b(pid=|PID: )\d+/$1pppp/;
   s/\buid=\d+/uid=uuuu/;
   s/\beuid=\d+/euid=uuuu/;
   s/set_process_info:\s+\d+/set_process_info: pppp/;
@@ -667,8 +717,12 @@ RESET_AFTER_EXTRA_LINE_READ:
   s"test-mail/temp\.\d+\."test-mail/temp.pppp.";
 
   # Optional pid in log lines
-  s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\s[+-]\d\d\d\d|)(\s\[\d+\])/
-    "$1$2 [" . new_value($3, "%s", \$next_pid) . "]"/gxe;
+  s/^(\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d)(\.\d{3}|)(\s[+-]\d{4}|)(\s\[\d+\])/
+    "$1$2$3 [" . new_value($4, "%s", \$next_pid) . "]"/gxe;
+
+  # Optional pid in syslog test lines
+  s/^(SYSLOG:\s\'([-0-9]{10}\s[:.0-9]{8,12}\s([-+]\d{4}\s)?|))(\[\d+\] )/
+    "$1\[" . new_value($4, "%s", \$next_pid) . "]"/gxe;
 
   # Detect a daemon stderr line with a pid and save the pid for subsequent
   # removal from following lines.
@@ -679,9 +733,6 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/waiting for children of \d+/waiting for children of pppp/;
   s/waiting for (\S+) \(\d+\)/waiting for $1 (pppp)/;
 
-  # The spool header file name varies with PID
-  s%^(Writing spool header file: .*/hdr).[0-9]{1,5}%$1.pppp%;
-
   # ======== Port numbers ========
   # Incoming port numbers may vary, but not in daemon startup line.
 
@@ -902,7 +953,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^SSL info:/;
     next if /SSL verify error: depth=0 error=certificate not trusted/;
     s/SSL3_READ_BYTES/ssl3_read_bytes/i;
-    s/^\d+:error:\d+(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+    s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
+    s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+    s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/;
 
     # gnutls version variances
     next if /^Error in the pull function./;
@@ -910,6 +963,19 @@ RESET_AFTER_EXTRA_LINE_READ:
     # optional IDN2 variant conversions.  Accept either IDN1 or IDN2
     s/conversion  strasse.de/conversion  xn--strae-oqa.de/;
     s/conversion: german.xn--strae-oqa.de/conversion: german.straße.de/;
+
+    # subsecond timstamp info in reported header-files
+    s/^(-received_time_usec \.)\d{6}$/$1uuuuuu/;
+
+    # Postgres server takes varible time to shut down; lives in various places
+    s/^waiting for server to shut down\.+ done$/waiting for server to shut down.... done/;
+    s/^\/.*postgres /POSTGRES /;
+
+    # DMARC is not always supported by the build
+    next if /^dmarc_tld_file =/;
+
+    # ARC is not always supported by the build
+    next if /^arc_sign =/;
     }
 
   # ======== stderr ========
@@ -920,15 +986,19 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     s/^Exim version .*/Exim version x.yz ..../;
 
-    # Debugging lines for Exim terminations
+    # Debugging lines for Exim terminations and process-generation
 
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
+    s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
     s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 
+    # we don't care what TZ enviroment the testhost was running
+    next if /^Reset TZ to/;
+
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;
@@ -986,7 +1056,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /name=localhost address=::1/;
 
     # drop pdkim debugging header
-    next if /^PDKIM <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+$/;
+    next if /^PDKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
 
     # Various other IPv6 lines must be omitted too
 
@@ -1029,12 +1099,14 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Some DBM libraries seem to make DBM files on opening with O_RDWR without
     # O_CREAT; other's don't. In the latter case there is some debugging output
     # which is not present in the former. Skip the relevant lines (there are
-    # two of them).
+    # three of them).
 
-    if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+    if (/returned from EXIM_DBOPEN: \(nil\)/)
       {
-      $_ = <IN>;
-      next;
+      $_ .= <IN>;
+      s?\Q$parm_cwd\E?TESTSUITE?g;
+      if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
+	{ $_ = <IN>; next; }
       }
 
     # Some tests turn on +expand debugging to check on expansions.
@@ -1055,15 +1127,26 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
-
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
+    # DISABLE_OCSP 
+    next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
+
     # SUPPORT_PROXY
     next if /host in hosts_proxy\?/;
 
     # Experimental_International
     next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
 
+    # Experimental_REQUIRETLS
+    next if / in tls_advertise_requiretls?\? no \(end of list\)/;
+
+    # TCP Fast Open
+    next if /^(ppppp )?setsockopt FASTOPEN: Network Error/;
+
+    # Experimental_PIPE_CONNECT
+    next if / in (pipelining_connect_advertise_hosts|hosts_pipe_connect)?\? no /;
+
     # Environment cleaning
     next if /\w+ in keep_environment\? (yes|no)/;
 
@@ -1077,9 +1160,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
       {
       $_ .= <IN>;
-      s/\s+\}\}(?=\(Exim )/\}\} /;
+      s/[\s╎]+\}\}(?=\(Exim )/\}\} /;
       }
-    if (/^  condition: def:tls_cipher$/)
+    if (/^ ├──condition: def:tls_cipher$/)
       {
       <IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
       <IN>; <IN>; <IN>; <IN>; <IN>; next;
@@ -1088,6 +1171,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Not all platforms build with DKIM enabled
     next if /^PDKIM >> Body data for hash, canonicalized/;
 
+    # Not all platforms have sendfile support
+    next if /^cannot use sendfile for body: no support$/;
+
     #  Parts of DKIM-specific debug output depend on the time/date
     next if /^date:\w+,\{SP\}/;
     next if /^PDKIM \[[^[]+\] (Header hash|b) computed:/;
@@ -1100,8 +1186,20 @@ RESET_AFTER_EXTRA_LINE_READ:
       s/Address family not supported by protocol family/Network Error/;
       s/Network is unreachable/Network Error/;
       }
-
     next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
+    s/^(Connecting to .* \.\.\. sending) \d+ (nonTFO early-data)$/$1 dd $2/;
+
+    # Specific pointer values reported for DB operations change from run to run
+    s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+    s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+
+    # Platform-dependent output during MySQL startup
+    next if /PerconaFT file system space/;
+    next if /^Waiting for MySQL server to answer/;
+    next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
+
+    # Not all builds include DMARC
+    next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
 
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
@@ -1135,6 +1233,7 @@ RESET_AFTER_EXTRA_LINE_READ:
                 /^Support for:/ ||
                 /^Routers:/ ||
                 /^Transports:/ ||
+                /^Malware:/ ||
                 /^log selectors =/ ||
                 /^cwd=/ ||
                 /^Fixed never_users:/ ||
@@ -1157,6 +1256,57 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     # CHUNKING: exact sizes depend on hostnames in headers
     s/(=>.* K C="250- \d)\d+ (byte chunk, total \d)\d+/$1nn $2nn/;
+
+    # openssl version variances
+    s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
+    s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
+    s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
+    s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
+
+    # gnutls version variances
+    if (/TLS error on connection \(recv\): .* Decode error/)
+      {
+      my $prev = $_;
+      $_ = <IN>;
+      if (/error on first read/)
+	{
+	s/TLS session: \Kerror on first read:/(gnutls_handshake): A TLS fatal alert has been received.:/;
+	goto RESET_AFTER_EXTRA_LINE_READ;
+	}
+      else
+	{ $_ = $prev; }
+      }
+
+    # DKIM timestamps
+    if ( /(DKIM: d=.*) t=([0-9]*) x=([0-9]*) / )
+      {
+      my ($prefix, $t_diff) = ($1, $3 - $2);
+      s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
+      }
+
+    # port numbers
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d2/PORT_D2/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d3/PORT_D3/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_d4/PORT_D4/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_s/PORT_S/;
+    s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
+    s/I=\[[^\]]*\]:\K\d+/ppppp/;
+
+    }
+
+  # ======== mail ========
+
+  elsif ($is_mail)
+    {
+    # DKIM timestamps, and signatures depending thereon
+    if ( /^(\s+)t=([0-9]*); x=([0-9]*); b=[A-Za-z0-9+\/]+$/ )
+      {
+      my ($indent, $t_diff) = ($1, $3 - $2);
+      s/.*/${indent}t=T; x=T+${t_diff}; b=bbbb;/;
+      <IN>;
+      <IN>;
+      }
     }
 
   # ======== All files other than stderr ========
@@ -1486,6 +1636,11 @@ $munges =
     'gnutls_handshake' =>
     { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/' },
 
+    'gnutls_bad_clientcert' =>
+    { 'mainlog' => 's/\(certificate verification failed\): certificate invalid/\(gnutls_handshake\): The peer did not send any certificate./',
+      'stdout'  => 's/Succeeded in starting TLS/A TLS fatal alert has been received.\nFailed to start TLS'
+    },
+
     'optional_events' =>
     { 'stdout' => '/event_action =/' },
 
@@ -1505,7 +1660,17 @@ $munges =
     { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
 
     'tls_anycipher' =>
-    { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+    { 'mainlog'   => 's! X=TLS\S+ ! X=TLS_proto_and_cipher !;
+		      s! DN="C=! DN="/C=!;
+		      s! DN="[^,"]*\K,!/!;
+		      s! DN="[^,"]*\K,!/!;
+		      s! DN="[^,"]*\K,!/!;
+		     ',
+      'rejectlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /',
+      'mail'      => 's/^\s+by .+ with .+ \K tls TLS_.+$/(TLS_proto_and_cipher)/;
+		      s/ \(TLS[^)]*\)/ (TLS_proto_and_cipher)/;
+		     ',
+    },
 
     'debug_pid' =>
     { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
@@ -1516,13 +1681,18 @@ $munges =
 
     'optional_config' =>
     { 'stdout' => '/^(
-                  dkim_(canon|domain|private_key|selector|sign_headers|strict)
+                  dkim_(canon|domain|private_key|selector|sign_headers|strict|hash|identity|timestamps)
                   |gnutls_require_(kx|mac|protocols)
+		  |hosts_pipe_connect
                   |hosts_(requ(est|ire)|try)_(dane|ocsp)
-                  |hosts_(avoid|nopass|require|verify_avoid)_tls
+		  |dane_require_tls_ciphers
+                  |hosts_(avoid|nopass|noproxy|require|verify_avoid)_tls
+                  |pipelining_connect_advertise_hosts
                   |socks_proxy
                   |tls_[^ ]*
-                  )($|[ ]=)/x' },
+		  |utf8_downconvert
+                  )($|[ ]=)/x'
+    },
 
     'sys_bindir' =>
     { 'mainlog' => 's%/(usr/(local/)?)?bin/%SYSBINDIR/%' },
@@ -1538,6 +1708,12 @@ $munges =
 
     'timeout_errno' =>		# actual errno differs Solaris vs. Linux
     { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
+
+    'peer_terminated_conn' =>	# actual error differs FreedBSD vs. Linux
+    { 'stderr' => 's/^(  SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
+
+    'perl_variants' =>		# result of hash-in-scalar-context changed from bucket-fill to keycount
+    { 'stdout' => 's%^> X/X$%> X%' },
   };
 
 
@@ -2064,7 +2240,7 @@ elsif (/^millisleep\s+(.*)$/)
 
 
 # The "munge" command selects one of a hardwired set of test-result modifications
-# to be made before result compares are run agains the golden set.  This lets
+# to be made before result compares are run against the golden set.  This lets
 # us account for test-system dependent things which only affect a few, but known,
 # test-cases.
 # Currently only the last munge takes effect.
@@ -2394,6 +2570,7 @@ elsif (/^background$/)
 
   $_ = <SCRIPT>; $lineno++;
   chomp;
+  do_substitute($testno);
   $line = $_;
   if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
 
@@ -2536,7 +2713,7 @@ GetOptions(
     'valgrind' => \$valgrind,
     'range=s{2}'       => \my @range_wanted,
     'test=i@'          => \my @tests_wanted,
-    'flavor|flavour=s' => $flavour,
+    'flavor|flavour=s' => \$flavour,
     'help'             => sub { pod2usage(-exit => 0) },
     'man'              => sub {
         pod2usage(
@@ -2651,7 +2828,6 @@ foreach (@eximinfo)
     my $git = `git describe --dirty=-XX --match 'exim-4*'`;
     if (defined $git and $? == 0) {
       chomp $git;
-      $version =~ s/^\d+\K\./_/;
       $git =~ s/^exim-//i;
       $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
       print <<___
@@ -2714,7 +2890,7 @@ if (defined $parm_trusted_config_list)
   open(TCL, $parm_trusted_config_list) or die "Can't open $parm_trusted_config_list: $!\n";
   my $test_config = getcwd() . '/test-config';
   die "Can't find '$test_config' in TRUSTED_CONFIG_LIST $parm_trusted_config_list."
-  if not grep { /^$test_config$/ } <TCL>;
+  if not grep { /^\Q$test_config\E$/ } <TCL>;
   }
 else
   {
@@ -2728,6 +2904,9 @@ die "CONFIGURE_GROUP ($parm_configure_group) does not match the group invoking $
 	if 0020 & (stat "$parm_cwd/test-config")[2]
 	and $parm_configure_group != $);
 
+die "aux-fixed file is group-writeable; best to strip them all, recursively\n"
+	if 0020 & (stat "aux-fixed/0037.f-1")[2];
+
 
 open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
   die "** Cannot run $parm_exim: $!\n";
@@ -2739,6 +2918,7 @@ while (<EXIMINFO>)
   my(@temp);
 
   if (/^(Exim|Library) version/) { print; }
+  if (/Runtime: /) {print; }
 
   elsif (/^Size of off_t: (\d+)/)
     {
@@ -2802,6 +2982,15 @@ while (<EXIMINFO>)
         }
       }
     }
+
+  elsif (/^Malware: (.*)/)
+    {
+    print;
+    @temp = split /(\s+)/, $1;
+    push(@temp, ' ');
+    %parm_malware = @temp;
+    }
+
   }
 close(EXIMINFO);
 print "-" x 78, "\n";
@@ -3112,6 +3301,12 @@ unless (defined $parm_eximgroup)
   die "** ABANDONING.\n";
   }
 
+if ($parm_caller_home eq $parm_cwd)
+  {
+  print "will confuse working dir with homedir; change homedir\n";
+  die "** ABANDONING.\n";
+  }
+
 print "You need to be in the Exim group to run these tests. Checking ...";
 
 if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
@@ -3137,7 +3332,7 @@ while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
     $parm_ipv4 = $1;
     }
 
-  if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:\/\d+)/i)
+  if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
     {
     next if $1 eq '::1' or $1 =~ /^fe80/i;
     $parm_ipv6 = $1;
@@ -3197,6 +3392,7 @@ else
 
 print "IPv4 address is $parm_ipv4\n";
 print "IPv6 address is $parm_ipv6\n";
+$parm_ipv6 =~ /^[^%\/]*/;
 
 # For munging test output, we need the reversed IP addresses.
 
@@ -3241,6 +3437,12 @@ if ($parm_hostname =~ /[[:upper:]]/)
   print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
   }
 
+if ($parm_hostname =~ /\.example\.com$/)
+  {
+  die "\n*** Host name ends in .example.com; this conflicts with the testsuite use of that domain.\n"
+	. "    Please change the host's name (or comment out this check, and fail several testcases)\n";
+  }
+
 
 
 ##################################################
@@ -3294,7 +3496,6 @@ system("sudo cp eximdir/exim eximdir/exim_exim;" .
        "sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
        "sudo chmod 06755 eximdir/exim_exim");
 
-
 ##################################################
 #     Make copies of utilities we might need     #
 ##################################################
@@ -3337,6 +3538,15 @@ if (system("cp $parm_exim_dir/eximstats eximdir") != 0)
   tests_exit(-1, "Failed to make a copy of eximstats: $!");
   }
 
+# Collect some version information
+print '-' x 78, "\n";
+print "Perl version for runtest: $]\n";
+foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) {
+  # fold (or unfold?) multiline output into a one-liner
+  print join(', ', map { chomp; $_ } `$_ --version`), "\n";
+}
+print '-' x 78, "\n";
+
 
 ##################################################
 #    Check that the Exim user can access stuff   #
@@ -3458,6 +3668,36 @@ DIR: for (my $i = 0; $i < @test_dirs; $i++)
         {
         if (!defined $parm_transports{$1}) { $wantthis = 0; last; }
         }
+      elsif (/^malware (.*)$/)
+        {
+        if (!defined $parm_malware{$1}) { $wantthis = 0; last; }
+        }
+      elsif (/^feature (.*)$/)
+        {
+	# move to a subroutine?
+	my $eximinfo = "$parm_exim -C $parm_cwd/test-config -DDIR=$parm_cwd -bP macro $1";
+
+	open (IN, "$parm_cwd/confs/0000") ||
+	  tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+	open (OUT, ">test-config") ||
+	  tests_exit(-1, "Couldn't open test-config: $!\n");
+	while (<IN>)
+	  {
+	  do_substitute($testno);
+	  print OUT;
+	  }
+	close(IN);
+	close(OUT);
+
+	system($eximinfo . " >/dev/null 2>&1");
+	if ($? != 0) {
+	  unlink("$parm_cwd/test-config");
+	  $wantthis = 0;
+	  $_ = "feature $1";
+	  last;
+	}
+	unlink("$parm_cwd/test-config");
+        }
       else
         {
         tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
@@ -3913,8 +4153,12 @@ foreach $test (@test_list)
 	}
         if ($force_continue)
           {
-          print "\nstderr tail:\n";
+          print "\nstdout tail:\n";
+          print "==================>\n";
+          system("tail -20 test-stdout");
           print "===================\n";
+          print "stderr tail:\n";
+          print "==================>\n";
           system("tail -20 test-stderr");
           print "===================\n";
           print "... continue forced\n";