-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.373 2006/07/13 13:53:32 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.632 2010/06/12 15:21:25 jetmore Exp $
Change log file for Exim from version 4.21
-------------------------------------------
+Exim version 4.73
+-----------------
+
+PP/01 Date: & Message-Id: revert to normally being appended to a message,
+ only prepend for the Resent-* case. Fixes regression introduced in
+ Exim 4.70 by NM/22 for Bugzilla 607.
+
+PP/02 Include check_rfc2047_length in configure.default because we're seeing
+ increasing numbers of administrators be bitten by this.
+
+JJ/01 Added DISABLE_DKIM and comment to src/EDITME
+
+PP/03 Bugzilla 994: added openssl_options main configuration option.
+
+PP/04 Bugzilla 995: provide better SSL diagnostics on failed reads.
+
+PP/05 Bugzilla 834: provide a permit_coredump option for pipe transports.
+
+PP/06 Adjust NTLM authentication to handle SASL Initial Response.
+
+PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but
+ without a peer certificate, leading to a segfault because of an
+ assumption that peers always have certificates. Be a little more
+ paranoid. Problem reported by Martin Tscholak.
+
+PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
+ filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
+ NB: ClamAV planning to remove STREAM in "middle of 2010".
+ CL also introduces -bmalware, various -d+acl logging additions and
+ more caution in buffer sizes.
+
+PP/09 Implemented reverse_ip expansion operator.
+
+PP/10 Bugzilla 937: provide a "debug" ACL control.
+
+PP/11 Bugzilla 922: Documentation dusting, patch provided by John Horne.
+
+PP/12 Bugzilla 973: Implement --version.
+
+PP/13 Bugzilla 752: Refuse to build/run if Exim user is root/0.
+
+PP/14 Build without WITH_CONTENT_SCAN. Path from Andreas Metzler.
+
+PP/15 Bugzilla 816: support multiple condition rules on Routers.
+
+PP/16 Add bool_lax{} expansion operator and use that for combining multiple
+ condition rules, instead of bool{}. Make both bool{} and bool_lax{}
+ ignore trailing whitespace.
+
+JJ/02 prevent non-panic DKIM error from being sent to paniclog
+
+JJ/03 added tcp_wrappers_daemon_name to allow host entries other than
+ "exim" to be used
+
+PP/17 Fix malware regression for cmdline scanner introduced in PP/08.
+ Notification from Dr Andrew Aitchison.
+
+PP/18 Change ClamAV response parsing to be more robust and to handle ClamAV's
+ ExtendedDetectionInfo response format.
+ Notification from John Horne.
+
+PP/19 OpenSSL 1.0.0a compatibility const-ness change, should be backwards
+ compatible.
+
+PP/20 Added a CONTRIBUTING file. Fixed the documentation build to use http:
+ XSL and documented dependency on system catalogs, with examples of how
+ it normally works.
+
+DW/21 Added Valgrind hooks in store.c to help it capture out-of-bounds store
+ access.
+
+DW/22 Bugzilla 1044: CVE-2010-4345 - partial fix: restrict default behaviour
+ of CONFIGURE_OWNER and CONFIGURE_GROUP options to no longer allow a
+ configuration file which is writeable by the Exim user or group.
+
+DW/23 Bugzilla 1044: CVE-2010-4345 - part two: extend checks for writeability
+ of configuration files to cover files specified with the -C option if
+ they are going to be used with root privileges, not just the default
+ configuration file.
+
+DW/24 Bugzilla 1044: CVE-2010-4345 - part three: remove ALT_CONFIG_ROOT_ONLY
+ option (effectively making it always true).
+
+DW/25 Add TRUSTED_CONFIG_PREFIX_FILE option to allow alternative configuration
+ files to be used while preserving root privileges.
+
+DW/26 Set FD_CLOEXEC on SMTP sockets after forking in the daemon, to ensure
+ that rogue child processes cannot use them.
+
+PP/27 Bugzilla 1047: change the default for system_filter_user to be the Exim
+ run-time user, instead of root.
+
+PP/28 Add WHITELIST_D_MACROS option to let some macros be overriden by the
+ Exim run-time user without dropping privileges.
+
+DW/29 Remove use of va_copy() which breaks pre-C99 systems. Duplicate the
+ result string, instead of calling string_vformat() twice with the same
+ arguments.
+
+DW/30 Allow TRUSTED_CONFIG_PREFIX_FILE only for Exim or CONFIGURE_OWNER, not
+ for other users. Others should always drop root privileges if they use
+ -C on the command line, even for a whitelisted configure file.
+
+DW/31 Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
+
+
+Exim version 4.72
+-----------------
+
+JJ/01 installed exipick 20100104.1, adding $max_received_linelength,
+ $data_path, and $header_path variables; fixed documentation bugs and
+ typos
+
+JJ/02 installed exipick 20100222.0, added --input-dir and --finput to allow
+ exipick to access non-standard spools, including the "frozen" queue
+ (Finput)
+
+NM/01 Bugzilla 965: Support mysql stored procedures.
+ Patch from Alain Williams
+
+NM/02 Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD
+
+NM/03 Bugzilla 955: Documentation fix for max_rcpts.
+ Patch from Andreas Metzler
+
+NM/04 Bugzilla 954: Fix for unknown responses from Dovecot authenticator.
+ Patch from Kirill Miazine
+
+NM/05 Bugzilla 671: Added umask to procmail example.
+
+JJ/03 installed exipick 20100323.0, fixing doc bug
+
+NM/06 Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail
+ directory. Notification and patch from Dan Rosenberg.
+
+TK/01 PDKIM: Upgrade PolarSSL files to upstream version 0.12.1.
+
+TK/02 Improve log output when DKIM signing operation fails.
+
+MH/01 Treat the transport option dkim_domain as a colon separated
+ list, not as a single string, and sign the message with each element,
+ omitting multiple occurences of the same signer.
+
+NM/07 Null terminate DKIM strings, Null initialise DKIM variable
+ Bugzilla 985, 986. Patch by Simon Arlott
+
+NM/08 Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related)
+ Patch by Simon Arlott
+
+PP/01 Bugzilla 989: CVE-2010-2024 - work round race condition on
+ MBX locking. Notification from Dan Rosenberg.
+
+
+Exim version 4.71
+-----------------
+
+TK/01 Bugzilla 912: Fix DKIM segfault on empty headers/body.
+
+NM/01 Bugzilla 913: Documentation fix for gnutls_* options.
+
+NM/02 Bugzilla 722: Documentation for randint. Better randomness defaults.
+
+NM/03 Bugzilla 847: Enable DNSDB lookup by default.
+
+NM/04 Bugzilla 915: Flag broken perl installation during build.
+
+
+Exim version 4.70
+-----------------
+
+TK/01 Added patch by Johannes Berg that expands the main option
+ "spamd_address" if it starts with a dollar sign.
+
+TK/02 Write list of recipients to X-Envelope-Sender header when building
+ the mbox-format spool file for content scanning (suggested by Jakob
+ Hirsch).
+
+TK/03 Added patch by Wolfgang Breyha that adds experimental DCC
+ (http://www.dcc-servers.net/) support via dccifd. Activated by
+ setting EXPERIMENTAL_DCC=yes in Local/Makefile.
+
+TK/04 Bugzilla 673: Add f-protd malware scanner support. Patch submitted
+ by Mark Daniel Reidel <mr@df.eu>.
+
+NM/01 Bugzilla 657: Embedded PCRE removed from the exim source tree.
+ When building exim an external PCRE library is now needed -
+ PCRE is a system library on the majority of modern systems.
+ See entry on PCRE_LIBS in EDITME file.
+
+NM/02 Bugzilla 646: Removed unwanted C/R in Dovecot authenticator
+ conversation. Added nologin parameter to request.
+ Patch contributed by Kirill Miazine.
+
+TF/01 Do not log submission mode rewrites if they do not change the address.
+
+TF/02 Bugzilla 662: Fix stack corruption before exec() in daemon.c.
+
+NM/03 Bugzilla 602: exicyclog now handles panic log, and creates empty
+ log files in place. Contributed by Roberto Lima.
+
+NM/04 Bugzilla 667: Close socket used by dovecot authenticator.
+
+TF/03 Bugzilla 615: When checking the local_parts router precondition
+ after a local_part_suffix or local_part_prefix option, Exim now
+ does not use the address's named list lookup cache, since this
+ contains cached lookups for the whole local part.
+
+NM/05 Bugzilla 521: Integrated SPF Best Guess support contributed by
+ Robert Millan. Documentation is in experimental-spec.txt.
+
+TF/04 Bugzilla 668: Fix parallel build (make -j).
+
+NM/05.2 Bugzilla 437: Prevent Maildir aux files being created with mode 000.
+
+NM/05.3 Bugzilla 598: Improvement to Dovecot authenticator handling.
+ Patch provided by Jan Srzednicki.
+
+TF/05 Leading white space used to be stripped from $spam_report which
+ wrecked the formatting. Now it is preserved.
+
+TF/06 Save $spam_score, $spam_bar, and $spam_report in spool files, so
+ that they are available at delivery time.
+
+TF/07 Fix the way ${extract is skipped in the untaken branch of a conditional.
+
+TF/08 TLS error reporting now respects the incoming_interface and
+ incoming_port log selectors.
+
+TF/09 Produce a more useful error message if an SMTP transport's hosts
+ setting expands to an empty string.
+
+NM/06 Bugzilla 744: EXPN did not work under TLS.
+ Patch provided by Phil Pennock.
+
+NM/07 Bugzilla 769: Extraneous comma in usage fprintf
+ Patch provided by Richard Godbee.
+
+NM/08 Fixed erroneous documentation references to smtp_notquit_acl to be
+ acl_smtp_notquit, added index entry.
+
+NM/09 Bugzilla 787: Potential buffer overflow in string_format.
+ Patch provided by Eugene Bujak.
+
+NM/10 Bugzilla 770: Problem on some platforms modifying the len parameter to
+ accept(). Patch provided by Maxim Dounin.
+
+NM/11 Bugzilla 749: Preserve old behaviour of blanks comparing equal to zero.
+ Patch provided by Phil Pennock.
+
+NM/12 Bugzilla 497: Correct behaviour of exiwhat when no config exists.
+
+NM/13 Bugzilla 590: Correct handling of Resent-Date headers.
+ Patch provided by Brad "anomie" Jorsch.
+
+NM/14 Bugzilla 622: Added timeout setting to transport filter.
+ Patch provided by Dean Brooks.
+
+TK/05 Add native DKIM support (does not depend on external libraries).
+
+NM/15 Bugzilla 854: Removed code that symlinks to pcre as its no longer useful.
+ Patch provided by Graeme Fowler.
+
+NM/16 Bugzilla 851: Documentation example syntax fix.
+
+NM/17 Changed NOTICE file to remove references to embedded PCRE.
+
+NM/18 Bugzilla 894: Fix issue with very long lines including comments in
+ lsearch.
+
+NM/19 Bugzilla 745: TLS version reporting.
+ Patch provided by Phil Pennock.
+
+NM/20 Bugzilla 167: bool: condition support.
+ Patch provided by Phil Pennock.
+
+NM/21 Bugzilla 665: gnutls_compat_mode to allow compatibility with broken
+ clients. Patch provided by Phil Pennock.
+
+NM/22 Bugzilla 607: prepend (not append) Resent-Message-ID and Resent-Date.
+ Patch provided by Brad "anomie" Jorsch.
+
+NM/23 Bugzilla 687: Fix misparses in eximstats.
+ Patch provided by Heiko Schlittermann.
+
+NM/24 Bugzilla 688: Fix exiwhat to handle log_selector = +pid.
+ Patch provided by Heiko Schlittermann.
+
+NM/25 Bugzilla 727: Use transport mode as default mode for maildirsize file.
+ plus update to original patch.
+
+NM/26 Bugzilla 799: Documentation correction for ratelimit.
+
+NM/27 Bugzilla 802: Improvements to local interface IP addr detection.
+ Patch provided by David Brownlee.
+
+NM/28 Bugzilla 807: Improvements to LMTP delivery logging.
+
+NM/29 Bugzilla 862, 866, 875: Documentation bugfixes.
+
+NM/30 Bugzilla 888: TLS documentation bugfixes.
+
+NM/31 Bugzilla 896: Dovecot buffer overrun fix.
+
+NM/32 Bugzilla 889: Change all instances of "expr" in shell scripts to "expr --"
+ Unlike the original bugzilla I have changed all shell scripts in src tree.
+
+NM/33 Bugzilla 898: Transport filter timeout fix.
+ Patch by Todd Rinaldo.
+
+NM/34 Bugzilla 901: Fix sign/unsigned and UTF mistmatches.
+ Patch by Serge Demonchaux.
+
+NM/35 Bugzilla 39: Base64 decode bug fixes.
+ Patch by Jakob Hirsch.
+
+NM/36 Bugzilla 909: Correct connect() call in dcc code.
+
+NM/37 Bugzilla 910: Correct issue with relaxed/simple handling.
+
+NM/38 Bugzilla 908: Removed NetBSD3 support as no longer needed.
+
+NM/39 Bugzilla 911: Fixed MakeLinks build script.
+
+
+Exim version 4.69
+-----------------
+
+TK/01 Add preliminary DKIM support. Currently requires a forked version of
+ ALT-N's libdkim that I have put here:
+ http://duncanthrax.net/exim-experimental/
+
+ Note to Michael Haardt: I had to rename some vars in sieve.c. They
+ were called 'true' and it seems that C99 defines that as a reserved
+ keyword to be used with 'bool' variable types. That means you could
+ not include C99-style headers which use bools without triggering
+ build errors in sieve.c.
+
+NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked
+ as mailq or other aliases. Changed the --help handling significantly
+ to do whats expected. exim_usage() emits usage/help information.
+
+SC/01 Added the -bylocaldomain option to eximstats.
+
+NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr.
+
+NM/03 Bugzilla 613: Documentation fix for acl_not_smtp.
+
+NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall).
+
+
+Exim version 4.68
+-----------------
+
+PH/01 Another patch from the Sieve maintainer.
+
+PH/02 When an IPv6 address is converted to a string for single-key lookup
+ in an address list (e.g. for an item such as "net24-dbm;/net/works"),
+ dots are used instead of colons so that keys in lsearch files need not
+ contain colons. This was done some time before quoting was made available
+ in lsearch files. However, iplsearch files do require colons in IPv6 keys
+ (notated using the quote facility) so as to distinguish them from IPv4
+ keys. This meant that lookups for IP addresses in host lists did not work
+ for iplsearch lookups.
+
+ This has been fixed by arranging for IPv6 addresses to be expressed with
+ colons if the lookup type is iplsearch. This is not incompatible, because
+ previously such lookups could never work.
+
+ The situation is now rather anomolous, since one *can* have colons in
+ ordinary lsearch keys. However, making the change in all cases is
+ incompatible and would probably break a number of configurations.
+
+TK/01 Change PRVS address formatting scheme to reflect latests BATV draft
+ version.
+
+MH/01 The "spam" ACL condition code contained a sscanf() call with a %s
+ conversion specification without a maximum field width, thereby enabling
+ a rogue spamd server to cause a buffer overflow. While nobody in their
+ right mind would setup Exim to query an untrusted spamd server, an
+ attacker that gains access to a server running spamd could potentially
+ exploit this vulnerability to run arbitrary code as the Exim user.
+
+TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use
+ $primary_hostname instead of what libspf2 thinks the hosts name is.
+
+MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for
+ a directory entry by the name of the lookup key. Previously, if a
+ symlink pointed to a non-existing file or a file in a directory that
+ Exim lacked permissions to read, a lookup for a key matching that
+ symlink would fail. Now it is enough that a matching directory entry
+ exists, symlink or not. (Bugzilla 503.)
+
+PH/03 The body_linecount and body_zerocount variables are now exported in the
+ local_scan API.
+
+PH/04 Added the $dnslist_matched variable.
+
+PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client.
+ This means they are set thereafter only if the connection becomes
+ encrypted.
+
+PH/06 Added the client_condition to authenticators so that some can be skipped
+ by clients under certain conditions.
+
+PH/07 The error message for a badly-placed control=no_multiline_responses left
+ "_responses" off the end of the name.
+
+PH/08 Added -Mvc to output a copy of a message in RFC 2822 format.
+
+PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly
+ (without spaces) instead of just copying the configuration text.
+
+PH/10 Added the /noupdate option to the ratelimit ACL condition.
+
+PH/11 Added $max_received_linelength.
+
+PH/12 Added +ignore_defer and +include_defer to host lists.
+
+PH/13 Installed PCRE version 7.2. This needed some changes because of the new
+ way in which PCRE > 7.0 is built.
+
+PH/14 Implemented queue_only_load_latch.
+
+PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a
+ MAIL command. The effect was to mangle the value on 64-bit systems.
+
+PH/16 Another patch from the Sieve maintainer.
+
+PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper.
+
+PH/18 If a system quota error occurred while trying to create the file for
+ a maildir delivery, the message "Mailbox is full" was not appended to the
+ bounce if the delivery eventually timed out. Change 4.67/27 below applied
+ only to a quota excession during the actual writing of the file.
+
+PH/19 It seems that peer DN values may contain newlines (and other non-printing
+ characters?) which causes problems in log lines. The DN values are now
+ passed through string_printing() before being added to log lines.
+
+PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle
+ and InterBase are left for another time.)
+
+PH/21 Added message_body_newlines option.
+
+PH/22 Guard against possible overflow in moan_check_errorcopy().
+
+PH/23 POSIX allows open() to be a macro; guard against that.
+
+PH/24 If the recipient of an error message contained an @ in the local part
+ (suitably quoted, of course), incorrect values were put in $domain and
+ $local_part during the evaluation of errors_copy.
+
+
+Exim version 4.67
+-----------------
+
+MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
+ is unset (happens when testing with -bh and -oMi isn't used). Thanks to
+ Jan Srzednicki.
+
+PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
+ issue a MAIL command.
+
+PH/02 In an ACL statement such as
+
+ deny dnslists = X!=127.0.0.2 : X=127.0.0.2
+
+ if a client was not listed at all, or was listed with a value other than
+ 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
+ the condition was not true (as it should be), so access was not denied.
+ The bug was that the ! inversion was incorrectly passed on to the second
+ item. This has been fixed.
+
+PH/03 Added additional dnslists conditions == and =& which are different from
+ = and & when the dns lookup returns more than one IP address.
+
+PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
+ cipher suites used by GnuTLS. These options are ignored by OpenSSL.
+
+PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
+ FSYNC, which compiles an option called disable_fsync that allows for
+ bypassing fsync(). The documentation is heavily laced with warnings.
+
+SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
+
+PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
+ with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
+ to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
+ including adding "make clean"; (3) Added -fPIC when compiling the test
+ dynamically loaded module, to get rid of a warning.
+
+MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
+ message fails, move_frozen_messages = true and ignore_bounce_errors_after
+ = 0s. The bug is otherwise harmless.
+
+PH/07 There was a bug in the dovecot authenticator such that the value of
+ $auth1 could be overwritten, and so not correctly preserved, after a
+ successful authentication. This usually meant that the value preserved by
+ the server_setid option was incorrect.
+
+PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
+
+PH/09 Installed PCRE release 7.0.
+
+PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being
+ run for batched SMTP input. It is now run at the start of every message
+ in the batch. While fixing this I discovered that the process information
+ (output by running exiwhat) was not always getting set for -bs and -bS
+ input. This is fixed, and it now also says "batched" for BSMTP.
+
+PH/11 Added control=no_pipelining.
+
+PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's
+ patch, slightly modified), and move the expansion of helo_data till after
+ the connection is made in the smtp transport (so it can use these
+ values).
+
+PH/13 Added ${rfc2047d: to decoded RFC 2047 strings.
+
+PH/14 Added log_selector = +pid.
+
+PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set.
+
+PH/16 Add ${if forany and ${if forall.
+
+PH/17 Added dsn_from option to vary the From: line in DSNs.
+
+PH/18 Flush SMTP output before performing a callout, unless control =
+ no_callout_flush is set.
+
+PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender
+ was true (the default) a successful delivery failed to delete the retry
+ item, thus causing premature timeout of the address. The bug is now
+ fixed.
+
+PH/20 Added hosts_avoid_pipelining to the smtp transport.
+
+PH/21 Long custom messages for fakedefer and fakereject are now split up
+ into multiline reponses in the same way that messages for "deny" and
+ other ACL rejections are.
+
+PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
+ with slight modification.
+
+PH/23 Applied sieve patches from the maintainer "tracking the latest notify
+ draft, changing the syntax and factoring some duplicate code".
+
+PH/24 When the log selector "outgoing_port" was set, the port was shown as -1
+ for deliveries of the second and subsequent messages over the same SMTP
+ connection.
+
+PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and
+ ${reduce, with only minor "tidies".
+
+SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match.
+
+PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its
+ expansion side effects.
+
+PH/27 When a message times out after an over-quota error from an Exim-imposed
+ quota, the bounce message says "mailbox is full". This message was not
+ being given when it was a system quota that was exceeded. It now should
+ be the same.
+
+MH/03 Made $recipients available in local_scan(). local_scan() already has
+ better access to the recipient list through recipients_list[], but
+ $recipients can be useful in postmaster-provided expansion strings.
+
+PH/28 The $smtp_command and $smtp_command_argument variables were not correct
+ in the case of a MAIL command with additional options following the
+ address, for example: MAIL FROM:<foo@bar> SIZE=1234. The option settings
+ were accidentally chopped off.
+
+PH/29 SMTP synchronization checks are implemented when a command is read -
+ there is a check that no more input is waiting when there shouldn't be
+ any. However, for some commands, a delay in an ACL can mean that it is
+ some time before the response is written. In this time, more input might
+ arrive, invalidly. So now there are extra checks after an ACL has run for
+ HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when
+ pipelining has not been advertised.
+
+PH/30 MH's patch to allow iscntrl() characters to be list separators.
+
+PH/31 Unlike :fail:, a custom message specified with :defer: was not being
+ returned in the SMTP response when smtp_return_error_details was false.
+ This has been fixed.
+
+PH/32 Change the Dovecot authenticator to use read() and write() on the socket
+ instead of the C I/O that was originally supplied, because problems were
+ reported on Solaris.
+
+PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in
+ Exim which did not show up earlier: it was assuming that a call to
+ SSL_CTX_set_info_callback() might give an error value. In fact, there is
+ no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback()
+ was a macro that became an assignment, so it seemed to work. This has
+ changed to a proper function call with a void return, hence the compile
+ error. Exim's code has been fixed.
+
+PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit
+ cpus.
+
+PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify".
+
+PH/36 Applied John Jetmore's patch to add -v functionality to exigrep.
+
+PH/37 If a message is not accepted after it has had an id assigned (e.g.
+ because it turns out to be too big or there is a timeout) there is no
+ "Completed" line in the log. When some messages of this type were
+ selected by exigrep, they were listed as "not completed". Others were
+ picked up by some special patterns. I have improved the selection
+ criteria to be more general.
+
+PH/38 The host_find_failed option in the manualroute router can now be set
+ to "ignore", to completely ignore a host whose IP address cannot be
+ found. If all hosts are ignored, the behaviour is controlled by the new
+ host_all_ignored option.
+
+PH/39 In a list of hosts for manualroute, if one item (either because of multi-
+ homing or because of multiple MX records with /mx) generated more than
+ one IP address, and the following item turned out to be the local host,
+ all the secondary addresses of the first item were incorrectly removed
+ from the list, along with the local host and any following hosts (which
+ is what is supposed to happen).
+
+PH/40 When Exim receives a message, it writes the login name, uid, and gid of
+ whoever called Exim into the -H file. In the case of the daemon it was
+ behaving confusingly. When first started, it used values for whoever
+ started the daemon, but after a SIGHUP it used the Exim user (because it
+ calls itself on a restart). I have changed the code so that it now always
+ uses the Exim user.
+
+PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a
+ message are rejected with the same error (e.g. no authentication or bad
+ sender address), and a DATA command is nevertheless sent (as can happen
+ with PIPELINING or a stupid MUA), the error message that was given to the
+ RCPT commands is included in the rejection of the DATA command. This is
+ intended to be helpful for MUAs that show only the final error to their
+ users.
+
+PH/42 Another patch from the Sieve maintainer.
+
+SC/02 Eximstats - Differentiate between permanent and temporary rejects.
+ Eximstats - Fixed some broken HTML links and added missing column headers
+ (Jez Hancock).
+ Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email
+ columns for Rejects, Temp Rejects, Ham, and Spam rows.
+
+SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables.
+
+PH/43 Yet another patch from the Sieve maintainer.
+
+PH/44 I found a way to check for a TCP/IP connection going away before sending
+ the response to the final '.' that terminates a message, but only in the
+ case where the client has not sent further data following the '.'
+ (unfortunately, this is allowed). However, in many cases there won't be
+ any further data because there won't be any more messages to send. A call
+ to select() can be used: if it shows that the input is "ready", there is
+ either input waiting, or the socket has been closed. An attempt to read
+ the next input character can distinguish the two cases. Previously, Exim
+ would have sent an OK response which the client would never have see.
+ This could lead to message repetition. This fix should cure that, at
+ least in a lot of common cases.
+
+PH/45 Do not advertise STARTTLS in response to HELP unless it would be
+ advertised in response to EHLO.
+
+
+Exim version 4.66
+-----------------
+
+PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
+ fixed by 4.65/MH/01 (is this a record?) are fixed:
+
+ (i) An empty string was always treated as zero by the numeric comparison
+ operators. This behaviour has been restored.
+
+ (ii) It is documented that the numeric comparison operators always treat
+ their arguments as decimal numbers. This was broken in that numbers
+ starting with 0 were being interpreted as octal.
+
+ While fixing these problems I realized that there was another issue that
+ hadn't been noticed. Values of message_size_limit (both the global option
+ and the transport option) were treated as octal if they started with 0.
+ The documentation was vague. These values are now always treated as
+ decimal, and I will make that clear in the documentation.
+
+
+Exim version 4.65
+-----------------
+
+TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
+ Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
+ versions. (#438)
+
+MH/01 Don't check that the operands of numeric comparison operators are
+ integers when their expansion is in "skipping" mode (fixes bug
+ introduced by 4.64-PH/07).
+
+PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
+ child addresses, Exim now panics and dies. Previously, because the count
+ is held in a short int, deliveries were likely to be lost. As such a
+ large number of recipients for a single message is ridiculous
+ (performance will be very, very poor), I have chosen to impose a limit
+ rather than extend the field.
+
+
+Exim version 4.64
+-----------------
+
+TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
+ leftover -K file (the existence of which was triggered by #402).
+ While we were at it, introduced process PID as part of the -K
+ filename. This should rule out race conditions when creating
+ these files.
+
+TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
+ processing considerably. Previous code took too long for large mails,
+ triggering a timeout which in turn triggers #401.
+
+TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
+ in the DK code in transports.c. sendfile() is not really portable,
+ hence the _LINUX specificness.
+
+TF/01 In the add_headers option to the mail command in an Exim filter,
+ there was a bug that Exim would claim a syntax error in any
+ header after the first one which had an odd number of characters
+ in the field name.
+
+PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
+ callout verification, Exim cached a "reject" for the entire domain. This
+ is correct for most verifications, but it is not correct for a recipient
+ verification with use_sender or use_postmaster set, because in that case
+ the callout does not use MAIL FROM:<>. Exim now distinguishes the special
+ case of MAIL FROM:<> rejection from other early rejections (e.g.
+ rejection of HELO). When verifying a recipient using a non-null MAIL
+ address, the cache is ignored if it shows MAIL FROM:<> rejection.
+ Whatever the result of the callout, the value of the domain cache is
+ left unchanged (for any other kind of callout, getting as far as trying
+ RCPT means that the domain itself is ok).
+
+PH/02 Tidied a number of unused variable and signed/unsigned warnings that
+ gcc 4.1.1 threw up.
+
+PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
+ manifest itself as EPIPE rather than ECONNECT. When tidying away a
+ session, the daemon ignores ECONNECT errors and logs others; it now
+ ignores EPIPE as well.
+
+PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
+ (quoted-printable decoding).
+
+PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
+ later the small subsequent patch to fix an introduced bug.
+
+PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
+
+PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
+
+PH/08 An error is now given if message_size_limit is specified negative.
+
+PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
+ to be given (somewhat) arbitrary names.
+
+JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
+ in 4.64-PH/09.
+
+JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
+ miscellaneous code fixes
+
+PH/10 Added the log_reject_target ACL modifier to specify where to log
+ rejections.
+
+PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
+ hostname. This is wrong, because it relates to the incoming message (and
+ probably the interface on which it is arriving) and not to the outgoing
+ callout (which could be using a different interface). This has been
+ changed to use the value of the helo_data option from the smtp transport
+ instead - this is what is used when a message is actually being sent. If
+ there is no remote transport (possible with a router that sets up host
+ addresses), $smtp_active_hostname is used.
+
+PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
+ tweaks were necessary in order to get it to work (see also 21 below):
+ (a) The code assumed that strncpy() returns a negative number on buffer
+ overflow, which isn't the case. Replaced with Exim's string_format()
+ function.
+ (b) There were several signed/unsigned issues. I just did the minimum
+ hacking in of casts. There is scope for a larger refactoring.
+ (c) The code used strcasecmp() which is not a standard C function.
+ Replaced with Exim's strcmpic() function.
+ (d) The code set only $1; it now sets $auth1 as well.
+ (e) A simple test gave the error "authentication client didn't specify
+ service in request". It would seem that Dovecot has changed its
+ interface. Fortunately there's a specification; I followed it and
+ changed what the client sends and it appears to be working now.
+
+PH/13 Added $message_headers_raw to provide the headers without RFC 2047
+ decoding.
+
+PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
+ address A is aliased to B and C, where B exists and C does not. Without
+ -v the output is "A verified" because verification stops after a
+ successful redirection if more than one address is generated. However,
+ with -v the child addresses are also verified. Exim was outputting "A
+ failed to verify" and then showing the successful verification for C,
+ with its parentage. It now outputs "B failed to verify", showing B's
+ parentage before showing the successful verification of C.
+
+PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
+ look up a TXT record in a specific list after matching in a combined
+ list.
+
+PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
+ RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
+ they consult the DNS. I had assumed they would set it the way they
+ wanted; and indeed my experiments on Linux seem to show that in some
+ cases they do (I could influence IPv6 lookups but not IPv4 lookups).
+ To be on the safe side, however, I have now made the interface to
+ host_find_byname() similar to host_find_bydns(), with an argument
+ containing the DNS resolver options. The host_find_byname() function now
+ sets these options at its start, just as host_find_bydns() does. The smtp
+ transport options dns_qualify_single and dns_search_parents are passed to
+ host_find_byname() when gethostbyname=TRUE in this transport. Other uses
+ of host_find_byname() use the default settings of RES_DEFNAMES
+ (qualify_single) but not RES_DNSRCH (search_parents).
+
+PH/17 Applied (a modified version of) Nico Erfurth's patch to make
+ spool_read_header() do less string testing, by means of a preliminary
+ switch on the second character of optional "-foo" lines. (This is
+ overdue, caused by the large number of possibilities that now exist.
+ Originally there were few.) While I was there, I also converted the
+ str(n)cmp tests so they don't re-test the leading "-" and the first
+ character, in the hope this might squeeze out yet more improvement.
+
+PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
+ flag allowing group syntax was set by the header_syntax check but not
+ turned off, possible causing trouble later; (2) The flag was not being
+ set at all for the header_verify test, causing "group"-style headers to
+ be rejected. I have now set it in this case, and also caused header_
+ verify to ignore an empty address taken from a group. While doing this, I
+ came across some other cases where the code for allowing group syntax
+ while scanning a header line wasn't quite right (mostly, not resetting
+ the flag correctly in the right place). These bugs could have caused
+ trouble for malformed header lines. I hope it is now all correct.
+
+PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
+ with the "reply" argument non-NULL. The code, however (which originally
+ came from elsewhere) had *some* tests for NULL when it wrote to *reply,
+ but it didn't always do it. This confused somebody who was copying the
+ code for some other use. I have removed all the tests.
+
+PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
+ feature that was used to support insecure browsers during the U.S. crypto
+ embargo. It requires special client support, and Exim is probably the
+ only MTA that supported it -- and would never use it because real RSA is
+ always available. This code has been removed, because it had the bad
+ effect of slowing Exim down by computing (never used) parameters for the
+ RSA_EXPORT functionality.
+
+PH/21 On the advice of Timo Sirainen, added a check to the dovecot
+ authenticator to fail if there's a tab character in the incoming data
+ (there should never be unless someone is messing about, as it's supposed
+ to be base64-encoded). Also added, on Timo's advice, the "secured" option
+ if the connection is using TLS or if the remote IP is the same as the
+ local IP, and the "valid-client-cert option" if a client certificate has
+ been verified.
+
+PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
+ authenticators. This can be used for authorization after authentication
+ succeeds. (In the case of plaintext, it servers for both authentication
+ and authorization.)
+
+PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
+ if any retry times were supplied.
+
+PH/24 Exim crashed if verify=helo was activated during an incoming -bs
+ connection, where there is no client IP address to check. In this
+ situation, the verify now always succeeds.
+
+PH/25 Applied John Jetmore's -Mset patch.
+
+PH/26 Added -bem to be like -Mset, but loading a message from a file.
+
+PH/27 In a string expansion for a processed (not raw) header when multiple
+ headers of the same name were present, leading whitespace was being
+ removed from all of them, but trailing whitespace was being removed only
+ from the last one. Now trailing whitespace is removed from each header
+ before concatenation. Completely empty headers in a concatenation (as
+ before) are ignored.
+
+PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
+ Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
+
+PH/29 [Removed. This was a change that I later backed out, and forgot to
+ correct the ChangeLog entry (that I had efficiently created) before
+ committing the later change.]
+
+PH/30 Exim was sometimes attempting to deliver messages that had suffered
+ address errors (4xx response to RCPT) over the same connection as other
+ messages routed to the same hosts. Such deliveries are always "forced",
+ so retry times are not inspected. This resulted in far too many retries
+ for the affected addresses. The effect occurred only when there were more
+ hosts than the hosts_max_try setting in the smtp transport when it had
+ the 4xx errors. Those hosts that it had tried were not added to the list
+ of hosts for which the message was waiting, so if all were tried, there
+ was no problem. Two fixes have been applied:
+
+ (i) If there are any address or message errors in an SMTP delivery, none
+ of the hosts (tried or untried) are now added to the list of hosts
+ for which the message is waiting, so the message should not be a
+ candidate for sending over the same connection that was used for a
+ successful delivery of some other message. This seems entirely
+ reasonable: after all the message is NOT "waiting for some host".
+ This is so "obvious" that I'm not sure why it wasn't done
+ previously. Hope I haven't missed anything, but it can't do any
+ harm, as the worst effect is to miss an optimization.
+
+ (ii) If, despite (i), such a delivery is accidentally attempted, the
+ routing retry time is respected, so at least it doesn't keep
+ hammering the server.
+
+PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
+ in ${readsocket because some servers need this prod.
+
+PH/32 Added some extra debug output when updating a wait-xxx database.
+
+PH/33 The hint "could be header name not terminated by colon", which has been
+ given for certain expansion errors for a long time, was not being given
+ for the ${if def:h_colon_omitted{... case.
+
+PH/34 The spec says: "With one important exception, whenever a domain list is
+ being scanned, $domain contains the subject domain." There was at least
+ one case where this was not true.
+
+PH/35 The error "getsockname() failed: connection reset by peer" was being
+ written to the panic log as well as the main log, but it isn't really
+ panic-worthy as it just means the connection died rather early on. I have
+ removed the panic log writing for the ECONNRESET error when getsockname()
+ fails.
+
+PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
+ runs only) independently of the message's sender address. This meant
+ that, if the 4xx error was in fact related to the sender, a different
+ message to the same recipient with a different sender could confuse
+ things. In particualar, this can happen when sending to a greylisting
+ server, but other circumstances could also provoke similar problems.
+ I have changed the default so that the retry time for these errors is now
+ based a combination of the sender and recipient addresses. This change
+ can be overridden by setting address_retry_include_sender=false in the
+ smtp transport.
+
+PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
+ remote server are returned as part of bounce messages. This was not
+ happening for LMTP over a pipe (the lmtp transport), but now it is the
+ same for both kinds of LMTP.
+
+PH/38 Despite being documented as not happening, Exim was rewriting addresses
+ in header lines that were in fact CNAMEs. This is no longer the case.
+
+PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
+ and queue runs started by the daemon processed all messages. This has
+ been fixed so that -R and -S can now usefully be given with -q<time>.
+
+PH/40 Import PCRE release 6.7 (fixes some bugs).
+
+PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
+
+PH/42 Give an error if -q is specified more than once.
+
+PH/43 Renamed the variables $interface_address and $interface_port as
+ $received_ip_address and $received_port, to make it clear that these
+ values apply to message reception, and not to the outgoing interface when
+ a message is delivered. (The old names remain recognized, of course.)
+
+PH/44 There was no timeout on the connect() call when using a Unix domain
+ socket in the ${readsocket expansion. There now is.
+
+PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
+ be meaningful with "accept".
+
+SC/01 Eximstats V1.43
+ Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
+
+SC/02 Eximstats V1.44
+ Use a glob alias rather than an array ref in the generated
+ parser. This improves both readability and performance.
+
+SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
+ Collect SpamAssassin and rejection statistics.
+ Don't display local sender or destination tables unless
+ there is data to show.
+ Added average volumes into the top table text output.
+
+SC/04 Eximstats V1.46
+ Collect data on the number of addresses (recipients)
+ as well as the number of messages.
+
+SC/05 Eximstats V1.47
+ Added 'Message too big' to the list of mail rejection
+ reasons (thanks to Marco Gaiarin).
+
+SC/06 Eximstats V1.48
+ Mainlog lines which have GMT offsets and are too short to
+ have a flag are now skipped.
+
+SC/07 Eximstats V1.49 (Alain Williams)
+ Added the -emptyok flag.
+
+SC/08 Eximstats V1.50
+ Fixes for obtaining the IP address from reject messages.
+
+JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
+ (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
+ whitesspace changes from 4.64-PH/27
+
+JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
+ match 4.64-PH/13
+
+JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
+ are found, allow negative numbers in numeric criteria)
+
+JJ/06 exipick.20061117.2, added new $message_body_missing variable
+
+JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
+ to match changes made in 4.64-PH/43
+
+PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
+
+PH/47 Put in an explicit test for a DNS lookup of an address record where the
+ "domain" is actually an IP address, and force a failure. This locks out
+ those revolvers/nameservers that support "A-for-A" lookups, in
+ contravention of the specifications.
+
+PH/48 When a host name was looked up from an IP address, and the subsequent
+ forward lookup of the name timed out, the host name was left in
+ $sender_host_name, contrary to the specification.
+
+PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
+ restricted to single-key lookups, Exim was not diagnosing an error if
+ * or *@ was used with a query-style lookup.
+
+PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
+
+MH/01 local_scan ABI version incremented to 1.1. It should have been updated
+ long ago, but noone interested enough thought of it. Let's just say that
+ the "1.1" means that there are some new functions that weren't there at
+ some point in the past.
+
+PH/51 Error processing for expansion failure of helo_data from an smtp
+ transport during callout processing was broken.
+
+PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
+ tested/used via the -bh/-bhc/-bs options.
+
+PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
+ bug, fixed in subsequent PCRE releases).
+
+PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
+ arises when using the Solaris LDAP libraries (but not with OpenLDAP).
+
+PH/55 Check for a ridiculously long file name in exim_dbmbuild.
+
+
Exim version 4.63
-----------------
and :defer: in a redirect router. Add forbid_smtp_code to suppress the
latter.
+PH/17 Added extra conditions to the default value of delay_warning_condition
+ so that it is now:
+
+ ${if or { \
+ { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
+ { match{$h_precedence:}{(?i)bulk|list|junk} } \
+ { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
+ }{no}{yes}}
+
+ The Auto-Submitted: and various List- headers are standardised, whereas I
+ don't think Precedence: ever was.
+
+PH/18 Refactored debugging code in route_finduser() to show more information,
+ in particular, the error code if getpwnam() issues one.
+
+PH/19 Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
+ This is apparently needed in addition to the PH/07 change above to avoid
+ any possible encoding problems.
+
+PH/20 Perl can change the locale. Exim was resetting it after a ${perl call,
+ but not after initializing Perl.
+
+PH/21 Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
+ output them only if debugging. By default they are written stderr,
+ apparently, which is not desirable.
+
+PH/22 Added Alain Williams' LDAP patch to support setting REFERRALS=off on
+ queries.
+
+JJ/01 exipick: added --reverse (and -R synonym), --random, --size, --sort and
+ --not options
+
+JJ/02 exipick: rewrote --help documentation to hopefully make more clear.
+
+PH/23 Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
+ authenticated or an ident call has been made. Suppress the default
+ values for $authenticated_id and $authenticated_sender (but permit -oMai
+ and -oMas) when testing with -bh.
+
+PH/24 Re-jigged the order of the tests in the default configuration so that the
+ tests for valid domains and recipients precede the DNS black list and CSA
+ tests, on the grounds that those ones are more expensive.
+
+PH/25 Exim was not testing for a space following SMTP commands such as EHLO
+ that require one. Thus, EHLORHUBARB was interpreted as a valid command.
+ This bug exists in every version of Exim that I still have, right back to
+ 0.12.
+
+PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
+ However, an attempt to turn on case-sensitivity in a regex key by
+ including (?-i) didn't work because the subject string was already
+ lowercased, and the effects were non-intuitive. It turns out that a
+ one-line patch can be used to allow (?-i) to work as expected.
+
Exim version 4.62
-----------------
git://git.exim.org / users / jgh / exim.git / blobdiff