-Transport post-delivery actions
+Event Actions
--------------------------------------------------------------
-An arbitrary per-transport string can be expanded on successful delivery,
-and (for SMTP transports) a second string on deferrals caused by a host error.
+(Renamed from TPDA, Transport post-delivery actions)
+
+An arbitrary per-transport string can be expanded upon various transport events.
+Additionally a main-section configuration option can be expanded on some
+per-message events.
This feature may be used, for example, to write exim internal log information
(not available otherwise) into a database.
-In order to use the feature, you must set
+In order to use the feature, you must compile with
-EXPERIMENTAL_TPDA=yes
+EXPERIMENTAL_EVENT=yes
in your Local/Makefile
-and define the expandable strings in the runtime config file, to
-be executed at end of delivery.
+and define one or both of
+- the event_action option in the transport
+- the event_action main option
+to be expanded when the event fires.
+
+A new variable, $event_name, is set to the event type when the
+expansion is done. The current list of events is:
+
+ msg:complete after main per message
+ msg:delivery after transport per recipient
+ msg:host:defer after transport per attempt
+ msg:fail:delivery after main per recipient
+ msg:fail:internal after main per recipient
+ tcp:connect before transport per connection
+ tcp:close after transport per connection
+ tls:cert before both per certificate in verification chain
+ smtp:connect after transport per connection
-Additionally, there are 6 more variables, available at end of
-delivery:
+The expansion is called for all event types, and should use the $event_name
+value to decide when to act. The variable data is a colon-separated
+list, describing an event tree.
-tpda_delivery_ip IP of host, which has accepted delivery
-tpda_delivery_port Port of remote host which has accepted delivery
-tpda_delivery_fqdn FQDN of host, which has accepted delivery
-tpda_delivery_local_part local part of address being delivered
-tpda_delivery_domain domain part of address being delivered
-tpda_delivery_confirmation SMTP confirmation message
+There is an auxilary variable, $event_data, for which the
+content is event_dependent:
-In case of a deferral caused by a host-error:
-tpda_defer_errno Error number
-tpda_defer_errstr Error string possibly containing more details
+ msg:delivery smtp confirmation mssage
+ msg:host:defer error string
+ tls:cert verification chain depth
+ smtp:connect smtp banner
-The $router_name and $transport_name variables are also usable.
+The msg:host:defer event populates one extra variable, $event_defer_errno.
+The following variables are likely to be useful depending on the event type:
-To take action after successful deliveries, set the following option
-on any transport of interest.
+ router_name, transport_name
+ local_part, domain
+ host, host_address, host_port
+ tls_out_peercert
+ lookup_dnssec_authenticated, tls_out_dane
+ sending_ip_address, sending_port
+ message_exim_id, verify_mode
-tpda_delivery_action
An example might look like:
-tpda_delivery_action = \
-${lookup pgsql {SELECT * FROM record_Delivery( \
+event_action = ${if eq {msg:delivery}{$event_name} \
+{${lookup pgsql {SELECT * FROM record_Delivery( \
'${quote_pgsql:$sender_address_domain}',\
'${quote_pgsql:${lc:$sender_address_local_part}}', \
- '${quote_pgsql:$tpda_delivery_domain}', \
- '${quote_pgsql:${lc:$tpda_delivery_local_part}}', \
- '${quote_pgsql:$tpda_delivery_ip}', \
- '${quote_pgsql:${lc:$tpda_delivery_fqdn}}', \
- '${quote_pgsql:$message_exim_id}')}}
-
-The string is expanded after the delivery completes and any
-side-effects will happen. The result is then discarded.
+ '${quote_pgsql:$domain}', \
+ '${quote_pgsql:${lc:$local_part}}', \
+ '${quote_pgsql:$host_address}', \
+ '${quote_pgsql:${lc:$host}}', \
+ '${quote_pgsql:$message_exim_id}')}} \
+} {}}
+
+The string is expanded when each of the supported events occur
+and any side-effects of the expansion will happen.
Note that for complex operations an ACL expansion can be used.
-In order to log host deferrals, add the following option to an SMTP
-transport:
+The expansion of the event_action option should normally
+return an empty string. Should it return anything else the
+following will be forced:
-tpda_host_defer_action
+ msg:delivery (ignored)
+ msg:host:defer (ignored)
+ msg:fail:delivery (ignored)
+ tcp:connect do not connect
+ tcp:close (ignored)
+ tls:cert refuse verification
+ smtp:connect close connection
-This is a private option of the SMTP transport. It is intended to
-log failures of remote hosts. It is executed only when exim has
-attempted to deliver a message to a remote host and failed due to
-an error which doesn't seem to be related to the individual
-message, sender, or recipient address.
-See section 47.2 of the exim documentation for more details on how
-this is determined.
+No other use is made of the result string.
-Example:
-tpda_host_defer_action = \
-${lookup mysql {insert into delivlog set \
- msgid = '${quote_mysql:$message_exim_id}', \
- senderlp = '${quote_mysql:${lc:$sender_address_local_part}}', \
- senderdom = '${quote_mysql:$sender_address_domain}', \
- delivlp = '${quote_mysql:${lc:$tpda_delivery_local_part}}', \
- delivdom = '${quote_mysql:$tpda_delivery_domain}', \
- delivip = '${quote_mysql:$tpda_delivery_ip}', \
- delivport = '${quote_mysql:$tpda_delivery_port}', \
- delivfqdn = '${quote_mysql:$tpda_delivery_fqdn}', \
- deliverrno = '${quote_mysql:$tpda_defer_errno}', \
- deliverrstr = '${quote_mysql:$tpda_defer_errstr}' \
- }}
+Known issues:
+- the tls:cert event is only called for the cert chain elements
+ received over the wire, with GnuTLS. OpenSSL gives the entire
+ chain including thse loaded locally.
Redis Lookup
221 mail.example.net closing connection
-DSN Support
---------------------------------------------------------------
-
-DSN Support tries to add RFC 3461 support to Exim. It adds support for
-*) the additional parameters for MAIL FROM and RCPT TO
-*) RFC complient MIME DSN messages for all of
- success, failure and delay notifications
-*) dsn_advertise_hosts main option to select which hosts are able
- to use the extension
-*) dsn_lasthop router switch to end DSN processing
-
-In case of failure reports this means that the last three parts, the message body
-intro, size info and final text, of the defined template are ignored since there is no
-logical place to put them in the MIME message.
-
-All the other changes are made without changing any defaults
-
-Building exim:
---------------
-
-Define
-EXPERIMENTAL_DSN=YES
-in your Local/Makefile.
-
-Configuration:
---------------
-All DSNs are sent in MIME format if you built exim with EXPERIMENTAL_DSN=YES
-No option needed to activate it, and no way to turn it off.
-
-Failure and delay DSNs are triggered as usual except a sender used NOTIFY=...
-to prevent them.
-
-Support for Success DSNs is added and activated by NOTIFY=SUCCESS by clients.
-
-Add
-dsn_advertise_hosts = *
-or a more restrictive host_list to announce DSN in EHLO answers
-
-Those hosts can then use NOTIFY,ENVID,RET,ORCPT options.
-
-If a message is relayed to a DSN aware host without changing the envelope
-recipient the options are passed along and no success DSN is generated.
-
-A redirect router will always trigger a success DSN if requested and the DSN
-options are not passed any further.
-
-A success DSN always contains the recipient address as submitted by the
-client as required by RFC. Rewritten addresses are never exposed.
-
-If you used DSN patch up to 1.3 before remove all "dsn_process" switches from
-your routers since you don't need them anymore. There is no way to "gag"
-success DSNs anymore. Announcing DSN means answering as requested.
-
-You can prevent Exim from passing DSN options along to other DSN aware hosts by defining
-dsn_lasthop
-in a router. Exim will then send the success DSN himself if requested as if
-the next hop does not support DSN.
-Adding it to a redirect router makes no difference.
-
-
-Certificate name checking
---------------------------------------------------------------
-The X509 certificates used for TLS are supposed be verified
-that they are owned by the expected host. The coding of TLS
-support to date has not made these checks.
-
-If built with EXPERIMENTAL_CERTNAMES defined, code is
-included to do so, and a new smtp transport option
-"tls_verify_cert_hostname" supported which takes a list of
-names for which the checks must be made. The host must
-also be in "tls_verify_hosts".
-
-Both Subject and Subject-Alternate-Name certificate fields
-are supported, as are wildcard certificates (limited to
-a single wildcard being the initial component of a 3-or-more
-component FQDN).
DANE
by (a) is thought to be smaller than that of the set
of root CAs.
+It also allows the server to declare (implicitly) that
+connections to it should use TLS. An MITM could simply
+fail to pass on a server's STARTTLS.
+
DANE scales better than having to maintain (and
side-channel communicate) copies of server certificates
for every possible target server. It also scales
DANE requires a server operator to do three things:
1) run DNSSEC. This provides assurance to clients
that DNS lookups they do for the server have not
-been tampered with.
+been tampered with. The domain MX record applying
+to this server, its A record, its TLSA record and
+any associated CNAME records must all be covered by
+DNSSEC.
2) add TLSA DNS records. These say what the server
certificate for a TLS connection should be.
3) offer a server certificate, or certificate chain,
operation of DANE.
The TLSA record for the server may have "certificate
-usage" of DANE_TA(2) or DANE_EE(3). The latter specifies
+usage" of DANE-TA(2) or DANE-EE(3). The latter specifies
the End Entity directly, i.e. the certificate involved
is that of the server (and should be the sole one transmitted
during the TLS handshake); this is appropriate for a
single system, using a self-signed certificate.
- DANE_TA usage is effectively declaring a specific CA
+ DANE-TA usage is effectively declaring a specific CA
to be used; this might be a private CA or a public,
well-known one. A private CA at simplest is just
a self-signed certificate which is used to sign
If a public CA is used then all clients must be primed with it
(losing one advantage of DANE) - but the attack surface is
reduced from all public CAs to that single CA.
-DANE_TA is commonly used for several services and/or
+DANE-TA is commonly used for several services and/or
servers, each having a TLSA query-domain CNAME record,
all of which point to a single TLSA record.
The TLSA record should have a Selector field of SPKI(1)
-and a Matching Type fiels of SHA2-512(2).
+and a Matching Type field of SHA2-512(2).
+
+At the time of writing, https://www.huque.com/bin/gen_tlsa
+is useful for quickly generating TLSA records; and commands like
-For use with the DANE_TA model, server certificates
+ openssl x509 -in -pubkey -noout <certificate.pem \
+ | openssl rsa -outform der -pubin 2>/dev/null \
+ | openssl sha512 \
+ | awk '{print $2}'
+
+are workable for 4th-field hashes.
+
+For use with the DANE-TA model, server certificates
must have a correct name (SubjectName or SubjectAltName).
The use of OCSP-stapling should be considered, allowing
for fast revocation of certificates (which would otherwise
-be limited by the DNS TTL on the TLSA records).
+be limited by the DNS TTL on the TLSA records). However,
+this is likely to only be usable with DANE-TA. NOTE: the
+default of requesting OCSP for all hosts is modified iff
+DANE is in use, to:
+
+ hosts_request_ocsp = ${if or { {= {0}{$tls_out_tlsa_usage}} \
+ {= {4}{$tls_out_tlsa_usage}} } \
+ {*}{}}
+
+The (new) variable $tls_out_tlsa_usage is a bitfield with
+numbered bits set for TLSA record usage codes.
+The zero above means DANE was not in use,
+the four means that only DANE-TA usage TLSA records were
+found. If the definition of hosts_request_ocsp includes the
+string "tls_out_tlsa_usage", they are re-expanded in time to
+control the OCSP request.
+
+This modification of hosts_request_ocsp is only done if
+it has the default value of "*". Admins who change it, and
+those who use hosts_require_ocsp, should consider the interaction
+with DANE in their OCSP settings.
-For client-side DANE there is a new smtp transport option,
-hosts_try_dane. It does the obvious thing.
-[ may add a hosts_require_dane, too? ]
-[ should it be domain-based rather than host-based? ]
+For client-side DANE there are two new smtp transport options,
+hosts_try_dane and hosts_require_dane. They do the obvious thing.
+[ should they be domain-based rather than host-based? ]
DANE will only be usable if the target host has DNSSEC-secured
MX, A and TLSA records.
+A TLSA lookup will be done if either of the above options match
+and the host-lookup succeded using dnssec.
+If a TLSA lookup is done and succeeds, a DANE-verified TLS connection
+will be required for the host.
+
(TODO: specify when fallback happens vs. when the host is not used)
-If dane is in use the following transport options are ignored:
+If DANE is requested and useable (see above) the following transport
+options are ignored:
+ hosts_require_tls
tls_verify_hosts
tls_try_verify_hosts
tls_verify_certificates
tls_crl
tls_verify_cert_hostnames
- hosts_require_ocsp (might rethink those two)
- hosts_request_ocsp
+
+If DANE is not usable, whether requested or not, and CA-anchored
+verification evaluation is wanted, the above variables should be set
+appropriately.
Currently dnssec_request_domains must be active (need to think about that)
and dnssec_require_domains is ignored.
+If verification was successful using DANE then the "CV" item
+in the delivery log line will show as "CV=dane".
+
+There is a new variable $tls_out_dane which will have "yes" if
+verification succeeded using DANE and "no" otherwise (only useful
+in combination with EXPERIMENTAL_EVENT), and a new variable
+$tls_out_tlsa_usage (detailed above).
+
--------------------------------------------------------------
End of file
git://git.exim.org / users / jgh / exim.git / blobdiff