X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/f055f31efca6f1beea3fb65a06e16265e481e63e..7e66e54dcf419ff995a49250902ae71a73228373:/doc/doc-src/spec.src diff --git a/doc/doc-src/spec.src b/doc/doc-src/spec.src index 5ecbd9e9e..dd7685689 100644 --- a/doc/doc-src/spec.src +++ b/doc/doc-src/spec.src @@ -1,4 +1,4 @@ -. $Cambridge: exim/doc/doc-src/spec.src,v 1.5 2005/01/27 10:25:35 ph10 Exp $ +. $Cambridge: exim/doc/doc-src/spec.src,v 1.8 2005/02/17 11:58:25 ph10 Exp $ . .set version "4.50" .set previousversion "4.40" @@ -477,12 +477,15 @@ tips, and know-how for the benefit of others. .section Mailing lists .index mailing lists||for Exim users -The following are the two main Exim mailing lists: +.em +The following are the three main Exim mailing lists: .display rm .tabs 28 $it{exim-users@@exim.org} $t general discussion list +$it{exim-dev@@exim.org} $t discussion of bugs, enhancements, etc. $it{exim-announce@@exim.org} $t moderated, low volume announcements list .endd +.nem You can subscribe to these lists, change your existing subscriptions, and view or search the archives via the .if ~~html @@ -3276,9 +3279,11 @@ name of the run time configuration file that is in use. .em As part of its operation, \-bV-\ causes Exim to read and syntax check its configuration file. However, this is a static check only. It cannot check -values that to be expanded. You cannot rely on \-bV-\ alone to discover (for -example) all the typos in the configuration; some realistic testing is needed. -The \-bh-\ and \-N-\ options provide more dynamic testing facilities. +values that are to be expanded. For example, although a misspelt ACL verb is +detected, an error in the verb's arguments is not. You cannot rely on \-bV-\ +alone to discover (for example) all the typos in the configuration; some +realistic testing is needed. The \-bh-\ and \-N-\ options provide more dynamic +testing facilities. .nem @@ -5957,7 +5962,7 @@ whereas for \%nwildlsearch%\, no expansion takes place. Like \%lsearch%\, the testing is done case-insensitively. The following forms of wildcard are recognized: .numberpars "$*$" -The string may begin with an asterisk to mean `begins with'. For example: +The string may begin with an asterisk to mean `ends with'. For example: .display asis *.a.b.c data for anything.a.b.c *fish data for anythingfish @@ -9633,9 +9638,14 @@ compilations of the same version of the program. .em .tempindent 0 -\$demime@_$\\*xxx*\: Two variables whose names start with \$demime$\ are -available when Exim is compiled with the content-scanning extension and the -obsolete \demime\ condition. For details, see section ~~SECTdemimecond. +\$demime@_errorlevel$\: This variable is available when Exim is compiled with +the content-scanning extension and the obsolete \demime\ condition. For +details, see section ~~SECTdemimecond. + +.tempindent 0 +\$demime@_reason$\: This variable is available when Exim is compiled with the +content-scanning extension and the obsolete \demime\ condition. For details, +see section ~~SECTdemimecond. .nem .index black list (DNS) @@ -10037,10 +10047,9 @@ if no size was given. The value may not, of course, be truthful. .em .tempindent 0 -\$mime@_$\\*xxx*\: -A number of variables whose names start with \$mime$\ are available when Exim -is compiled with the content-scanning extension. For details, see section -~~SECTscanmimepart. +\$mime@_$\\*xxx*\: A number of variables whose names start with \$mime$\ are +available when Exim is compiled with the content-scanning extension. For +details, see section ~~SECTscanmimepart. .nem .tempindent 0 @@ -10171,10 +10180,12 @@ authenticated. Thus, for example, if the protocol is set to `esmtpsa', the message was received over an encrypted SMTP connection and the client was successfully authenticated. -Exim also uses the protocol name `smtps' for the rare situation where the -client initially used \\EHLO\\, set up an encrypted connection using -\\STARTTLS\\, and then used \\HELO\\ afterwards to initiate the encrypted -session. +Exim uses the protocol name `smtps' for the case when encryption is +automatically set up on connection without the use of \\STARTTLS\\ (see +\tls@_on@_connect@_ports\), and the client uses \\HELO\\ to initiate the +encrypted SMTP session. The name `smtps' is also used for the rare situation +where the client initially uses \\EHLO\\, sets up an encrypted connection using +\\STARTTLS\\, and then uses \\HELO\\ afterwards. The \-oMr-\ option provides a way of specifying a custom protocol name for messages that are injected locally by trusted callers. This is commonly used to @@ -10673,21 +10684,29 @@ terminating newline. .em .section Use of standard output and error by Perl +.index Perl||standard output and error You should not write to the standard error or output streams from within your -Perl code, as it is not defined how these are set up. In versions of Exim up to -at least 4.50, it is possible for the standard output or error to refer to the -SMTP connection during message reception. Writing to this stream is likely to -cause chaos. Something may be done about this in later releases. - -Unfortunately, the Perl \warn\ statment writes to the standard error stream, -and this may be embedded in Perl modules that you use, but over which you have -no control. One way round this is to ensure that the following Perl magic is -obeyed before \warn\ is used: -.display asis -$SIG{__WARN__} = sub { Exim::log_write($_[0]) }; -.endd -This causes the output of the \warn\ statement to be written to Exim's log -file. +Perl code, as it is not defined how these are set up. In versions of Exim +before 4.50, it is possible for the standard output or error to refer to the +SMTP connection during message reception via the daemon. Writing to this stream +is certain to cause chaos. From Exim 4.50 onwards, the standard output and +error streams are connected to \(/dev/null)\ in the daemon. The chaos is +avoided, but the output is lost. + +.index Perl||\warn\, use of +The Perl \warn\ statement writes to the standard error stream by default. Calls +to \warn\ may be embedded in Perl modules that you use, but over which you have +no control. When Exim starts up the Perl interpreter, it arranges for output +from the \warn\ statement to be written to the Exim main log. You can change +this by including appropriate Perl magic somewhere in your Perl code. For +example, to discard \warn\ output completely, you need this: +.display asis +$SIG{__WARN__} = sub { }; +.endd +Whenever a \warn\ is obeyed, the anonymous subroutine is called. In this +example, the code for the subroutine is empty, so it does nothing, but you can +include any Perl code that you like. The text of the \warn\ message is passed +as the first subroutine argument. .nem @@ -10841,15 +10860,17 @@ value of \daemon@_smtp@_ports\ is no longer relevant in this example.) .em -.section Support for the obsolete SSMTP protocol +.section Support for the obsolete SSMTP (or SMTPS) protocol .rset SECTsupobssmt "~~chapter.~~section" .index ssmtp protocol +.index smtps protocol .index SMTP||ssmtp protocol -Exim supports the obsolete SSMTP protocol that was used before the \\STARTTLS\\ -command was standardized for SMTP. Some legacy clients still use this protocol. -If the \tls@_on@_connect@_ports\ option is set to a list of port numbers, -connections to those ports must use SSMTP. The most common use of this option -is expected to be +.index SMTP||smtps protocol +Exim supports the obsolete SSMTP protocol (also known as SMTPS) that was used +before the \\STARTTLS\\ command was standardized for SMTP. Some legacy clients +still use this protocol. If the \tls@_on@_connect@_ports\ option is set to a +list of port numbers, connections to those ports must use SSMTP. The most +common use of this option is expected to be .display asis tls_on_connect_ports = 465 .endd @@ -11208,7 +11229,7 @@ listed in more than one group. \tls@_dhparam\ $t$rm{DH parameters for server} .newline .em -\tls@_on@_connect@_ports\ $t$rm{specify SSMTP ports} +\tls@_on@_connect@_ports\ $t$rm{specify SSMTP (SMTPS) ports} .nem .newline \tls@_privatekey\ $t$rm{location of server private key} @@ -11399,17 +11420,17 @@ Consequently, this option is turned off by default. This option defines the ACL that is run when a non-SMTP message is on the point of being accepted. See chapter ~~CHAPACL for further details. -.index ~~ACL||on SMTP connection -.conf acl@_smtp@_connect string$**$ unset -This option defines the ACL that is run when an SMTP connection is received. -See chapter ~~CHAPACL for further details. - .index ~~ACL||setting up for SMTP commands .index \\AUTH\\||ACL for .conf acl@_smtp@_auth string$**$ unset This option defines the ACL that is run when an SMTP \\AUTH\\ command is received. See chapter ~~CHAPACL for further details. +.index ~~ACL||on SMTP connection +.conf acl@_smtp@_connect string$**$ unset +This option defines the ACL that is run when an SMTP connection is received. +See chapter ~~CHAPACL for further details. + .index \\DATA\\, ACL for .conf acl@_smtp@_data string$**$ unset This option defines the ACL that is run after an SMTP \\DATA\\ command has been @@ -12803,13 +12824,18 @@ override; they are accepted, but ignored. .index queue runner||processing messages in order If this option is set, queue runs happen in order of message arrival instead of in an arbitrary order. For this to happen, a complete list of the entire queue -must be set up before the deliveries start. When the queue is all in a single -directory (the default), this happens anyway, but if \split@_spool@_directory\ -is set it does not -- for delivery in random order, the sub-directories are -processed one at a time (in random order), to avoid setting up one huge list. -Thus, setting \queue@_run@_in@_order\ with \split@_spool@_directory\ may -degrade performance when the queue is large. In most situations, -\queue@_run@_in@_order\ should not be set. +must be set up before the deliveries start. When the queue is all held in a +single directory (the default), +.em +a single list is created for both the ordered and the non-ordered cases. +However, if \split@_spool@_directory\ is set, a single list is not created when +\queue@_run@_in@_order\ is false. In this case, the sub-directories are +processed one at a time (in a random order), and this avoids setting up one +huge list for the whole queue. Thus, setting \queue@_run@_in@_order\ with +\split@_spool@_directory\ may degrade performance when the queue is large, +because of the extra work in setting up the single, large list. In most +situations, \queue@_run@_in@_order\ should not be set. +.nem .conf queue@_run@_max integer 5 .index queue runner||maximum number of @@ -13154,6 +13180,7 @@ expanded and used instead of the value of \$primary@_hostname$\ in SMTP responses. For example, it is used as domain name in the response to an incoming \\HELO\\ or \\EHLO\\ command. .em +It is also used in \\HELO\\ commands for callout verification. The active hostname is placed in the \$smtp__active__hostname$\ variable, which is saved with any messages that are received. It is therefore available for use in routers and transports when the message is later delivered. @@ -13631,10 +13658,10 @@ ignored. See section ~~SECTopenvsgnu for further details. .em .conf tls@_on@_connect@_ports "string list" unset -This option specifies a list of incoming SSMTP ports that should operate the -obsolete SSMTP protocol, where a TLS session is immediately set up without -waiting for the client to issue a \\STARTTLS\\ command. For further details, -see section ~~SECTsupobssmt. +This option specifies a list of incoming SSMTP (aka SMTPS) ports that should +operate the obsolete SSMTP (SMTPS) protocol, where a TLS session is immediately +set up without waiting for the client to issue a \\STARTTLS\\ command. For +further details, see section ~~SECTsupobssmt. .nem .conf tls@_privatekey string$**$ unset @@ -16105,12 +16132,20 @@ text associated with the failure. For example, an alias file might contain: X.Employee: :fail: Gone away, no forwarding address .endd In the case of an address that is being verified from an ACL or as the subject -of a \\VRFY\\ command, the text is included in the SMTP error response by -default. In an ACL, an explicitly provided message overrides the default, but -the default message is available in the variable \$acl@_verify@_message$\ and -can therefore be included in a custom message if this is desired. Exim sends a -451 SMTP code for a :::defer::, and 550 for :::fail::. In non-SMTP cases the -text is included in the error message that Exim generates. +of a +.index \\VRFY\\||error text, display of +\\VRFY\\ command, the text is included in the SMTP error response by +default. +.em +.index \\EXPN\\||error text, display of +The text is not included in the response to an \\EXPN\\ command. +.nem + +In an ACL, an explicitly provided message overrides the default, but the +default message is available in the variable \$acl@_verify@_message$\ and can +therefore be included in a custom message if this is desired. Exim sends a 451 +SMTP code for a :::defer::, and 550 for :::fail::. In non-SMTP cases the text +is included in the error message that Exim generates. @@ -18790,10 +18825,18 @@ If this option is set, and the command returns any output, and also ends with a return code that is neither zero nor one of the return codes listed in \temp@_errors\ (that is, the delivery failed), the first line of output is written to the main log. +.em +This option and \log@_output\ are mutually exclusive. Only one of them may be +set. +.nem .conf log@_output boolean false If this option is set and the command returns any output, the first line of output is written to the main log, whatever the return code. +.em +This option and \log@_fail@_output\ are mutually exclusive. Only one of them +may be set. +.nem .conf max@_output integer 20K This specifies the maximum amount of output that the command may produce on its @@ -18858,6 +18901,10 @@ return code other than zero or one of the codes listed in \temp@_errors\ (that is, the delivery failed), the output is returned in the bounce message. However, if the message has a null sender (that is, it is itself a bounce message), output from the command is discarded. +.em +This option and \return@_output\ are mutually exclusive. Only one of them may +be set. +.nem .conf return@_output boolean false If this option is true, and the command produced any output, the delivery is @@ -18866,6 +18913,10 @@ is returned in the bounce message. Otherwise, the output is just discarded. However, if the message has a null sender (that is, it is a bounce message), output from the command is always discarded, whatever the setting of this option. +.em +This option and \return@_fail@_output\ are mutually exclusive. Only one of them +may be set. +.nem .conf temp@_errors "string list" "see below" .index \%pipe%\ transport||temporary failure @@ -21202,6 +21253,8 @@ The \%cyrus@_sasl%\ authenticator provides server support for the Cyrus SASL library implementation of the RFC 2222 (`Simple Authentication and Security Layer'). This library supports a number of authentication mechanisms, including PLAIN and LOGIN, but also several others that Exim does not support directly. +In particular, there is support for Kerberos authentication. + The \%cyrus@_sasl%\ authenticator provides a gatewaying mechanism directly to the Cyrus interface, so if your Cyrus library can do, for example, CRAM-MD5, then so can the \%cyrus@_sasl%\ authenticator. By default it uses the public @@ -21397,14 +21450,16 @@ in order to get TLS to work. .em -.section Support for the legacy `ssmtp' protocol +.section Support for the legacy `ssmtp' (aka `smtps') protocol .index ssmtp protocol +.index smtps protocol .index SMTP||ssmtp protocol +.index SMTP||smtps protocol Early implementations of encrypted SMTP used a different TCP port from normal SMTP, and expected an encryption negotiation to start immediately, instead of waiting for a \\STARTTLS\\ command from the client using the standard SMTP -port. The protocol was called `ssmtp' and port 465 was allocated for this -purpose. +port. The protocol was called `ssmtp' or `smtps', and port 465 was allocated +for this purpose. This approach was abandoned when encrypted SMTP was standardised, but there are still some legacy clients that use it. Exim supports these clients by means of @@ -23207,7 +23262,7 @@ Details of verification are given later, starting at section ~~SECTaddressverification. Exim caches the result of sender verification, to avoid doing it more than once per message. -.item "verify = sender=address/<>" +.item "verify = sender=<
>/<>" .index \verify\, ACL condition This is a variation of the previous option, in which a modified address is verified as a sender. @@ -24201,7 +24256,7 @@ contributing the code for this scanner. .index virus scanners||command line interface \cmdline\: This is the keyword for the generic command line scanner interface. It can be used to attach virus scanners that are invoked from the shell. This -scanner type takes 3 mantadory options: +scanner type takes 3 mandatory options: .numberpars The full path and name of the scanner binary, with all command line options, and a placeholder (%s) for the directory to scan.