X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/eba0c039a556478f50aa1e4839684027746197f7..8e3e25cac127659fa8b15f1ead18e1a39642f66b:/doc/doc-txt/ChangeLog?ds=sidebyside diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index 050fa034b..45ea2866d 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,242 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.261 2005/11/15 09:44:33 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.313 2006/02/23 12:41:22 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.61 +----------------- + +PH/01 The code for finding all the local interface addresses on a FreeBSD + system running IPv6 was broken. This may well have applied to all BSD + systems, as well as to others that have similar system calls. The broken + code found IPv4 interfaces correctly, but gave incorrect values for the + IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was + that it would not match correctly against @[] and not recognize the IPv6 + addresses as local. + +PH/02 The ipliteral router was not recognizing addresses of the form user@ + [ipv6:....] because it didn't know about the "ipv6:" prefix. + +PH/03 Added disable_ipv6. + +PH/04 Changed $reply_address to use the raw form of the headers instead of the + decoded form, because it is most often used to construct To: headers + lines in autoreplies, and the decoded form may well be syntactically + invalid. However, $reply_address has leading white space removed, and all + newlines turned into spaces so that the autoreply transport does not + grumble. + +PH/05 If group was specified without a user on a router, and no group or user + was specified on a transport, the group from the router was ignored. + +PH/06 Increased the number of ACL variables to 20 of each type, and arranged + for visible compile-time settings that can be used to change these + numbers, for those that want even more. Backwards compatibility with old + spool files has been maintained. However, going back to a previous Exim + release will lost any variables that are in spool files. + +PH/07 Two small changes when running in the test harness: increase delay when + passing a TCP/IP connection to a new process, in case the original + process has to generate a bounce, and remove special handling of + 127.0.0.2 (sic), which is no longer necessary. + +PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to + be the same on different OS. + +PH/09 Moved a debug statement in filter processing to avoid a race problem when + testing. + +JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:" + whether --show-vars was specified or not + +JJ/02 exipick: Added support for new ACL variable spool format introduced + in 4.61-PH/06 + +PH/10 Fixed another bug related to PH/04 above: if an incoming message had a + syntactically invalid From: or Reply-to: line, and a filter used this to + generate an autoreply, and therefore failed to obtain an address for the + autoreply, Exim could try to deliver to a non-existent relative file + name, causing unrelated and misleading errors. What now happens is that + it logs this as a hard delivery error, but does not attempt to create a + bounce message. + +PH/11 The exinext utility has a -C option for testing purposes, but although + the given file was scanned by exinext itself; it wasn't being passed on + when Exim was called. + +PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as + an end-of-file indication when reading a command response. + +PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was + compiled. In many other places in Exim, IPv6 addresses are always + recognized, so I have changed this. It also means that IPv4 domain + literals of the form [IPV4:n.n.n.n] are now always recognized. + +PH/14 When a uid/gid is specified for the queryprogram router, it cannot be + used if the router is not running as root, for example, when verifying at + ACL time, or when using -bh. The debugging output from this situation was + non-existent - all you got was a failure to exec. I have made two + changes: + + (a) Failures to set uid/gid, the current directory, or a process leader + in a subprocess such as that created by queryprogram now generate + suitable debugging ouput when -d is set. + + (b) The queryprogram router detects when it is not running as root, + outputs suitable debugging information if -d is set, and then runs + the subprocess without attempting to change uid/gid. + +PH/15 Minor change to Makefile for building test_host (undocumented testing + feature). + +PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the + additional section of a DNS packet that returns MX or SRV records. + Instead, it always explicitly searches for A/AAAA records. This avoids + major problems that occur when a DNS server includes only records of one + type (A or AAAA) in an MX/SRV packet. A byproduct of this change has + fixed another bug: if SRV records were looked up and the corresponding + address records were *not* found in the additional section, the port + values from the SRV records were lost. + +PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not + using the correct key (the original address) when searching the retry + rules in order to find which one to use for generating the retry hint. + +PH/18 If quota_warn_message contains a From: header, Exim now refrains from + adding the default one. Similarly, if it contains a Reply-To: header, the + errors_reply_to option, if set, is not used. + +PH/19 When calculating a retry time, Exim used to measure the "time since + failure" by looking at the "first failed" field in the retry record. Now + it does not use this if it is later than than the arrival time of the + message. Instead it uses the arrival time. This makes for better + behaviour in cases where some deliveries succeed, thus re-setting the + "first failed" field. An example is a quota failure for a huge message + when small messages continue to be delivered. Without this change, the + "time since failure" will always be short, possible causing more frequent + delivery attempts for the huge message than are intended. + +PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as + $1, $2, $3) because the numerical variables can be reset during some + expansion items (e.g. "match"), thereby losing the authentication data. + +PH/21 Make -bV show the size of off_t variables so that the test suite can + decide whether to run tests for quotas > 2G. + +PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold, + mailbox_size, and mailbox_filecount in the appendfile transport. If a + filecount value is greater than 2G or if a quota value is greater than 2G + on a system where the size of off_t is not greater than 4, a panic error + is given. + +PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can + never match. The debug and -bh output now contains an explicit error + message indicating a malformed IPv4 address or mask. + +PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address + 1.2.3.4 without a mask. Now it is not recognized as an IP address, and + PH/23 above applies. + +PH/25 Do not write to syslog when running in the test harness. The only + occasion when this arises is a failure to open the main or panic logs + (for which there is an explicit test). + +PH/26 Added the /no_tell option to "control=freeze". + +PH/27 If a host name lookup failed very early in a connection, for example, if + the IP address matched host_lookup and the reverse lookup yielded a name + that did not have a forward lookup, an error message of the form "no IP + address found for host xxx.xxx.xxx (during SMTP connection from NULL)" + could be logged. Now it outputs the IP address instead of "NULL". + +PH/28 An enabling patch from MH: add new function child_open_exim2() which + allows the sender and the authenticated sender to be set when + submitting a message from within Exim. Since child_open_exim() is + documented for local_scan(), the new function should be too. + +PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being + ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that + results in an empty string is now treated as unset. + +PH/30 Fix eximon buffer overflow bug (Bugzilla #73). + +PH/31 Added sender_verify_fail logging option. + +PH/32 In November 2003, the code in Exim that added an empty Bcc: header when + needed by RFC 822 but not by RFC 2822 was commented out. I have now + tidied the source and removed it altogether. + +PH/33 When a queue run was abandoned because the load average was too high, a + log line was always written; now it is written only if the queue_run log + selector is set. In addition, the log line for abandonment now contains + information about the queue run such as the pid. This is always present + in "start" and "stop" lines but was omitted from the "abandon" line. + +PH/34 Omit spaces between a header name and the colon in the error message that + is given when verify = headers_syntax fails (if there are lots of them, + the message gets confusing). + +PH/35 Change the default for dns_check_names_pattern to allow slashes within + names, as there are now some PTR records that contain slashes. This check + is only to protect against broken name servers that fall over on strange + characters, so the fact that it applies to all lookups doesn't matter. + +PH/36 Now that the new test suite is complete, we can remove some of the + special code in Exim that was needed for the old test suite. For example, + sorting DNS records because real resolvers return them in an arbitrary + order. The new test suite's fake resolver always returns records in the + same order. + +PH/37 When running in the test harness, use -odi for submitted messages (e.g. + bounces) except when queue_only is set, to avoid logging races between + the different processes. + +PH/38 Panic-die if .include specifies a non-absolute path. + +PH/39 A tweak to the "H" retry rule from its user. + +JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified + a label. They prevented compilation on older perls. + +JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused + a warning to be raised on newish perls. + +JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages + on queue. Changes to match documented behaviour of showing count of + messages matching specified criteria. + +PH/40 Changed the default ident timeout from 30s to 5s. + +PH/41 Added support for the use of login_cap features, on those BSD systems + that have them, for controlling the resources used by pipe deliveries. + +PH/42 The content-scanning code uses fopen() to create files in which to put + message data. Previously it was not paying any attention to the mode of + the files. Exim runs with umask(0) because the rest of the code creates + files with open(), and sets the required mode explicitly. Thus, these + files were ending up world-writeable. This was not a big issue, because, + being within the spool directory, they were not world-accessible. I have + created a function called modefopen, which takes an additional mode + argument. It sets umask(777), creates the file, chmods it to the required + mode, then resets the umask. All the relevant calls to fopen() in the + content scanning code have been changed to use this function. + +PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset + to 24 hours. This avoids potential overflow problems when processing G + and H retry rules. I suspect nobody ever tinkers with this value. + +PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile. + +PH/45 When the plaintext authenticator is running as a client, the server's + challenges are checked to ensure they are valid base64 strings. By + default, the authentication attempt is cancelled if an invalid string is + received. Setting client_ignore_invalid_base64 true ignores these errors. + The decoded challenge strings are now placed in $auth1, $auth2, etc. as + they are received. Thus, the responses can be made to depend on the + challenges. If an invalid string is ignored, an empty string is placed in + the variable. + + Exim version 4.60 ----------------- @@ -126,6 +360,46 @@ PH/13 After a successful wildlsearch lookup, discard the values of numeric variables because (a) they are in the wrong storage pool and (b) even if they were copied, it wouldn't work properly because of the caching. +PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length + checking when decoding. Apparently there are clients that generate + overlong encoded strings. Why am I not surprised? + +PH/15 If the first argument of "${if match_address" was not empty, but did not + contain an "@" character, Exim crashed. Now it writes a panic log message + and treats the condition as false. + +PH/16 In autoreply, treat an empty string for "once" the same as unset. + +PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve + extension "envelope-auth". The code is finished and in agreement with + other implementations, but there is no documentation so far and in fact, + nobody wrote the draft yet. This extension is currently #undef'ed, thus + not changing the active code. + + Print executed "if" and "elsif" statements when debugging is used. This + helps a great deal to understand what a filter does. + + Document more things not specified clearly in RFC3028. I had all this + sorted out, when out of a sudden new issues came to my mind. Oops." + +PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists + (Bugzilla #53). + +PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated + canonical form (as documented). However, after a host name lookup from + the IP address, check_host() was doing a simple string comparison with + addresses acquired from the DNS when checking that the found name did + have the original IP as one of its addresses. Since any found IPv6 + addresses are likely to be in abbreviated form, the comparison could + fail. Luckily, there already exists a function for doing the comparison + by converting both addresses to binary, so now that is used instead of + the text comparison. + +PH/20 There was another similar case to PH/19, when a complete host name was + given in a host list; looking up its IP address could give an abbreviated + form, whereas the current host's name might or might not be abbreviated. + The same fix has been applied. + Exim version 4.54 ----------------- @@ -154,9 +428,6 @@ TF/01 The control=submission/name=... option had a problem with syntax PH/05 Some modifications to the interface to the fake nameserver for the new testing suite. -PH/06 Add ${if def:sender_address {(envelope-from <$sender_address>)\n\t}} - into the default Received: header string. - Exim version 4.53