X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/e8793bad207763b266bedcb9d859e238b6a3a04e..e5b03e744b99888fe99ded76cc3c73762f62ecdf:/src/OS/Makefile-Base?ds=sidebyside

diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base
index f0edbf132..f82549ded 100644
--- a/src/OS/Makefile-Base
+++ b/src/OS/Makefile-Base
@@ -32,7 +32,8 @@ FE       = $(FULLECHO)
 # up-to-date. Then the os-specific source files and the C configuration file
 # are set up, and finally it goes to the main Exim target.
 
-all:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h allexim
+all:       allexim
+config:    $(EDITME) checklocalmake Makefile os.h os.c config.h version.h
 
 checklocalmake:
 	@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
@@ -94,14 +95,14 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 
-.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
+.PHONY: all config allexim buildauths buildlookups buildpdkim buildrouters \
         buildtransports checklocalmake clean
 
 
 # This is the real default target for all the various exim binaries and
 # scripts, once the configuring stuff is done.
 
-allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
+allexim: $(EXIM_MONITOR) exicyclog exinext exiwhat \
         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \
@@ -116,7 +117,7 @@ buildconfig: buildconfig.c
 
 
 # Target for the exicyclog utility script
-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src
 	@rm -f exicyclog
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -141,7 +142,7 @@ exicyclog: Makefile config.h ../src/exicyclog.src
 	@echo ">>> exicyclog script built"
 
 # Target for the exinext utility script
-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src
 	@rm -f exinext
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -156,7 +157,7 @@ exinext: Makefile config.h ../src/exinext.src
 	@echo ">>> exinext script built"
 
 # Target for the exiwhat utility script
-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src
 	@rm -f exiwhat
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -177,7 +178,7 @@ exiwhat: Makefile config.h ../src/exiwhat.src
 	@echo ">>> exiwhat script built"
 
 # Target for the exim_checkaccess utility script
-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src
 	@rm -f exim_checkaccess
 	@sed \
 	  -e "s?PROCESSED_FLAG?This file has been so processed.?"\
@@ -193,7 +194,7 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
 	@echo ">>> exim_checkaccess script built"; echo ""
 
 # Target for the Exim monitor start-up script
-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
           ../Local/eximon.conf
 	@rm -f eximon
 	$(SHELL) $(SCRIPTS)/Configure-eximon
@@ -297,7 +298,7 @@ convert4r4: Makefile ../src/convert4r4.src
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o
+OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o dmarc.o dane.o
 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
@@ -316,8 +317,8 @@ OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 
-exim:   lookups/lookups.a auths/auths.a pdkim/pdkim.a \
-        routers/routers.a transports/transports.a \
+exim:   buildlookups buildauths pdkim/pdkim.a \
+        buildrouters buildtransports \
         $(OBJ_EXIM) version.o
 	@echo "$(LNCC) -o exim"
 	$(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
@@ -354,7 +355,7 @@ exim_dumpdb: $(OBJ_DUMPDB)
 
 OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
 
-exim_fixdb:  $(OBJ_FIXDB) auths/auths.a
+exim_fixdb:  $(OBJ_FIXDB) buildauths
 	@echo "$(LNCC) -o exim_fixdb"
 	$(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
 	  auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
@@ -530,7 +531,7 @@ util-os.o:       $(HDRS) os.c
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 
-local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o:    config local_scan.h ../$(LOCAL_SCAN_SOURCE)
 	@echo "$(CC) local_scan.c"
 	$(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 
@@ -577,7 +578,7 @@ spool_out.o:     $(HDRS) spool_out.c
 std-crypto.o:    $(HDRS) std-crypto.c
 store.o:         $(HDRS) store.c
 string.o:        $(HDRS) string.c
-tls.o:           $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o:           $(HDRS) tls.c tls-gnu.c tlscert-gnu.c tls-openssl.c tlscert-openssl.c
 tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c
@@ -601,10 +602,11 @@ demime.o:        $(HDRS) demime.c
 # Dependencies for EXPERIMENTAL_* modules
 
 bmi_spam.o:      $(HDRS) bmi_spam.c
-spf.o:           $(HDRS) spf.h spf.c
-srs.o:           $(HDRS) srs.h srs.c
+dane.o:		 $(HDRS) dane.c dane-gnu.c dane-openssl.c
 dcc.o:           $(HDRS) dcc.h dcc.c
 dmarc.o:         $(HDRS) dmarc.h dmarc.c
+spf.o:           $(HDRS) spf.h spf.c
+srs.o:           $(HDRS) srs.h srs.c
 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles
@@ -620,7 +622,7 @@ drtables.o:      $(HDRS) drtables.c
 # When using parallel make, we don't have the dependency to force building
 # in the sub-directory unless we force that dependency:
 
-$(OBJ_LOOKUPS):  lookups/lookups.a
+$(OBJ_LOOKUPS):  buildlookups
 
 # The exim monitor's private modules - the sources live in a private
 # subdirectory. The final binary combines the private modules with some
@@ -648,8 +650,7 @@ $(MONBIN): $(HDRS)
 
 # The lookups library.
 
-buildlookups: lookups/lookups.a
-lookups/lookups.a: config.h version.h
+buildlookups: config
 	 @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
@@ -658,8 +659,7 @@ lookups/lookups.a: config.h version.h
 
 # The routers library.
 
-buildrouters: routers/routers.a
-routers/routers.a: config.h
+buildrouters: config
 	 @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -667,8 +667,7 @@ routers/routers.a: config.h
 
 # The transports library.
 
-buildtransports: transports/transports.a
-transports/transports.a: config.h
+buildtransports: config
 	 @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -676,8 +675,7 @@ transports/transports.a: config.h
 
 # The library of authorization modules
 
-buildauths: auths/auths.a
-auths/auths.a: config.h
+buildauths: config
 	 @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
@@ -686,7 +684,7 @@ auths/auths.a: config.h
 # The PDKIM library
 
 buildpdkim: pdkim/pdkim.a
-pdkim/pdkim.a: config.h
+pdkim/pdkim.a: config
 	 @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
 	   FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
 	   INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"