X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/98a90c36edb0fbe03e6db6bf4ad4fff0892f18bb..525239c16e35d7bf893e0e2232f4c4c4a7c75447:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 9637b5194..29aacf61c 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -2678,6 +2678,15 @@ no arguments. This option is an alias for &%-bV%& and causes version information to be displayed. +.new +.vitem &%-Ac%& &&& + &%-Am%& +.oindex "&%-Ac%&" +.oindex "&%-Am%&" +These options are used by Sendmail for selecting configuration files and are +ignored by Exim. +.wen + .vitem &%-B%&<&'type'&> .oindex "&%-B%&" .cindex "8-bit characters" @@ -2937,6 +2946,8 @@ use the &'exim_dbmbuild'& utility, or some other means, to rebuild alias files if this is required. If the &%bi_command%& option is not set, calling Exim with &%-bi%& is a no-op. +.new +. // Keep :help first, then the rest in alphabetical order .vitem &%-bI:help%& .oindex "&%-bI:help%&" .cindex "querying exim information" @@ -2946,6 +2957,12 @@ consumption. This one is not. The &%-bI:help%& option asks Exim for a synopsis of supported options beginning &`-bI:`&. Use of any of these options shall cause Exim to exit after producing the requested output. +.vitem &%-bI:dscp%& +.oindex "&%-bI:dscp%&" +.cindex "DSCP" "values" +This option causes Exim to emit an alphabetically sorted list of all +recognised DSCP names. + .vitem &%-bI:sieve%& .oindex "&%-bI:sieve%&" .cindex "Sieve filter" "capabilities" @@ -2955,6 +2972,7 @@ useful for ManageSieve (RFC 5804) implementations, in providing that protocol's &`SIEVE`& capability response line. As the precise list may depend upon compile-time build options, which this option will adapt to, this is the only way to guarantee a correct response. +.wen .vitem &%-bm%& .oindex "&%-bm%&" @@ -3069,6 +3087,12 @@ configuration file is output. If a list of configuration files was supplied, the value that is output here is the name of the file that was actually used. +.new +.cindex "options" "hiding name of" +If the &%-n%& flag is given, then for most modes of &%-bP%& operation the +name will not be output. +.wen + .cindex "daemon" "process id (pid)" .cindex "pid (process id)" "of daemon" If &%log_file_path%& or &%pid_file_path%& are given, the names of the @@ -3671,8 +3695,19 @@ if &%-f%& is also present, it overrides &"From&~"&. .vitem &%-G%& .oindex "&%-G%&" -.cindex "Sendmail compatibility" "&%-G%& option ignored" -This is a Sendmail option which is ignored by Exim. +.cindex "submission fixups, suppressing (command-line)" +.new +This option is equivalent to an ACL applying: +.code +control = suppress_local_fixups +.endd +for every message received. Note that Sendmail will complain about such +bad formatting, where Exim silently just does not fix it up. This may change +in future. + +As this affects audit information, the caller must be a trusted user to use +this option. +.wen .vitem &%-h%&&~<&'number'&> .oindex "&%-h%&" @@ -3690,6 +3725,19 @@ line by itself should not terminate an incoming, non-SMTP message. I can find no documentation for this option in Solaris 2.4 Sendmail, but the &'mailx'& command in Solaris 2.4 uses it. See also &%-ti%&. +.new +.vitem &%-L%&&~<&'tag'&> +.oindex "&%-L%&" +.cindex "syslog" "process name; set with flag" +This option is equivalent to setting &%syslog_processname%& in the config +file and setting &%log_file_path%& to &`syslog`&. +Its use is restricted to administrators. The configuration file has to be +read and parsed, to determine access rights, before this is set and takes +effect, so early configuration file errors will not honour this flag. + +The tag should not be longer than 32 characters. +.wen + .vitem &%-M%&&~<&'message&~id'&>&~<&'message&~id'&>&~... .oindex "&%-M%&" .cindex "forcing delivery" @@ -3930,9 +3978,9 @@ for that message. .vitem &%-n%& .oindex "&%-n%&" -.cindex "Sendmail compatibility" "&%-n%& option ignored" -This option is interpreted by Sendmail to mean &"no aliasing"&. It is ignored -by Exim. +This option is interpreted by Sendmail to mean &"no aliasing"&. +For normal modes of operation, it is ignored by Exim. +When combined with &%-bP%& it suppresses the name of an option from being output. .vitem &%-O%&&~<&'data'&> .oindex "&%-O%&" @@ -4551,6 +4599,13 @@ AIX uses &%-x%& for a private purpose (&"mail from a local mail program has National Language Support extended characters in the body of the mail item"&). It sets &%-x%& when calling the MTA from its &%mail%& command. Exim ignores this option. + +.new +.vitem &%-X%&&~<&'logfile'&> +.oindex "&%-X%&" +This option is interpreted by Sendmail to cause debug information to be sent +to the named file. It is ignored by Exim. +.wen .endlist .ecindex IIDclo1 @@ -5314,7 +5369,7 @@ it is unset, Exim uses the &[uname()]& system function to obtain the host name. The first three non-comment configuration lines are as follows: .code -domainlist local_domains = @ +domainlist local_domains = @ domainlist relay_to_domains = hostlist relay_from_hosts = 127.0.0.1 .endd @@ -5656,7 +5711,7 @@ examples described in &<>&. This means that no client can in fact authenticate until you complete the authenticator definitions. .code require message = relay not permitted - domains = +local_domains : +relay_domains + domains = +local_domains : +relay_to_domains .endd This statement rejects the address if its domain is neither a local domain nor one of the domains for which this host is a relay. @@ -6018,7 +6073,7 @@ The example PLAIN authenticator looks like this: # server_set_id = $auth2 # server_prompts = : # server_condition = Authentication is not yet configured -# server_advertise_condition = ${if def:tls_cipher } +# server_advertise_condition = ${if def:tls_in_cipher } .endd And the example LOGIN authenticator looks like this: .code @@ -6027,7 +6082,7 @@ And the example LOGIN authenticator looks like this: # server_set_id = $auth1 # server_prompts = <| Username: | Password: # server_condition = Authentication is not yet configured -# server_advertise_condition = ${if def:tls_cipher } +# server_advertise_condition = ${if def:tls_in_cipher } .endd The &%server_set_id%& option makes Exim remember the authenticated username @@ -7430,7 +7485,7 @@ ${lookup sqlite {/some/thing/sqlitedb \ .endd In a list, the syntax is similar. For example: .code -domainlist relay_domains = sqlite;/some/thing/sqlitedb \ +domainlist relay_to_domains = sqlite;/some/thing/sqlitedb \ select * from relays where ip='$sender_host_address'; .endd The only character affected by the &%quote_sqlite%& operator is a single @@ -7512,13 +7567,13 @@ subject is not in the set. If the end of the list is reached without the subject having matched any of the patterns, it is in the set if the last item was a negative one, but not if it was a positive one. For example, the list in .code -domainlist relay_domains = !a.b.c : *.b.c +domainlist relay_to_domains = !a.b.c : *.b.c .endd matches any domain ending in &'.b.c'& except for &'a.b.c'&. Domains that match neither &'a.b.c'& nor &'*.b.c'& do not match, because the last item in the list is positive. However, if the setting were .code -domainlist relay_domains = !a.b.c +domainlist relay_to_domains = !a.b.c .endd then all domains other than &'a.b.c'& would match because the last item in the list is negative. In other words, a list that ends with a negative item behaves @@ -7622,7 +7677,7 @@ the words &%domainlist%&, &%hostlist%&, &%addresslist%&, or &%localpartlist%&, respectively. Then there follows the name that you are defining, followed by an equals sign and the list itself. For example: .code -hostlist relay_hosts = 192.168.23.0/24 : my.friend.example +hostlist relay_from_hosts = 192.168.23.0/24 : my.friend.example addresslist bad_senders = cdb;/etc/badsenders .endd A named list may refer to other named lists: @@ -8703,6 +8758,22 @@ string easier to understand. This item inserts &"basic"& header lines. It is described with the &%header%& expansion item below. + +.vitem "&*${acl{*&<&'name'&>&*}{*&<&'arg'&>&*}...}*&" +.cindex "expansion" "calling an acl" +.cindex "&%acl%&" "call from expansion" +The name and zero to nine argument strings are first expanded separately. The expanded +arguments are assigned to the variables &$acl_arg1$& to &$acl_arg9$& in order. +Any used are made empty. The variable &$acl_narg$& is set to the number of +arguments. The named ACL (see chapter &<>&) is called +and may use the variables; if another acl expansion is used the values +are overwritten. If the ACL sets +a value using a "message =" modifier and returns accept, the value becomes +the result of the expansion. +If no message was set but the ACL returned accept, or if the ACL returned defer, +the value is an empty string. Otherwise the expansion fails. + + .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&& {*&<&'arg'&>&*}...}*&" .cindex &%dlfunc%& @@ -9512,6 +9583,7 @@ environments where Exim uses base 36 instead of base 62 for its message identifiers, base-36 digits. The number is converted to decimal and output as a string. + .vitem &*${domain:*&<&'string'&>&*}*& .cindex "domain" "extraction" .cindex "expansion" "domain extraction" @@ -9671,6 +9743,25 @@ See the description of the general &%length%& item above for details. Note that when &%length%& is used as an operator. +.vitem &*${listcount:*&<&'string'&>&*}*& +.cindex "expansion" "list item count" +.cindex "list" "item count" +.cindex "list" "count of items" +.cindex "&%listcount%& expansion item" +The string is interpreted as a list and the number of items is returned. + + +.vitem &*${listnamed:*&<&'name'&>&*}*&&~and&~&*${list_*&<&'type'&>&*name'&>&*}*& +.cindex "expansion" "named list" +.cindex "&%listnamed%& expansion item" +The name is interpreted as a named list and the content of the list is returned, +expanding any referenced lists, re-quoting as needed for colon-separation. +If the optional type if given it must be one of "a", "d", "h" or "l" +and selects address-, domain-, host- or localpart- lists to search among respectively. +Otherwise all types are searched in an undefined order and the first +matching list is returned. + + .vitem &*${local_part:*&<&'string'&>&*}*& .cindex "expansion" "local part extraction" .cindex "&%local_part%& expansion item" @@ -9958,8 +10049,8 @@ ${if >{$message_size}{10M} ... .endd Note that the general negation operator provides for inequality testing. The two strings must take the form of optionally signed decimal integers, -optionally followed by one of the letters &"K"& or &"M"& (in either upper or -lower case), signifying multiplication by 1024 or 1024*1024, respectively. +optionally followed by one of the letters &"K"&, &"M"& or &"G"& (in either upper or +lower case), signifying multiplication by 1024, 1024*1024 or 1024*1024*1024, respectively. As a special case, the numerical value of an empty string is taken as zero. @@ -11679,6 +11770,31 @@ driver that successfully authenticated the client from which the message was received. It is empty if there was no successful authentication. See also &$authenticated_id$&. +.new +.vitem &$sender_host_dnssec$& +.vindex "&$sender_host_dnssec$&" +If &$sender_host_name$& has been populated (by reference, &%hosts_lookup%& or +otherwise) then this boolean will have been set true if, and only if, the +resolver library states that the reverse DNS was authenticated data. At all +other times, this variable is false. + +It is likely that you will need to coerce DNSSEC support on in the resolver +library, by setting: +.code +dns_use_dnssec = 1 +.endd + +Exim does not perform DNSSEC validation itself, instead leaving that to a +validating resolver (eg, unbound, or bind with suitable configuration). + +Exim does not (currently) check to see if the forward DNS was also secured +with DNSSEC, only the reverse DNS. + +If you have changed &%host_lookup_order%& so that &`bydns`& is not the first +mechanism in the list, then this variable will be false. +.wen + + .vitem &$sender_host_name$& .vindex "&$sender_host_name$&" When a message is received from a remote host, this variable contains the @@ -11877,20 +11993,43 @@ command in a filter file. Its use is explained in the description of that command, which can be found in the separate document entitled &'Exim's interfaces to mail filtering'&. -.vitem &$tls_bits$& -.vindex "&$tls_bits$&" -Contains an approximation of the TLS cipher's bit-strength; the meaning of +.vitem &$tls_in_bits$& +.vindex "&$tls_in_bits$&" +Contains an approximation of the TLS cipher's bit-strength +on the inbound connection; the meaning of this depends upon the TLS implementation used. If TLS has not been negotiated, the value will be 0. The value of this is automatically fed into the Cyrus SASL authenticator when acting as a server, to specify the "external SSF" (a SASL term). -.vitem &$tls_certificate_verified$& -.vindex "&$tls_certificate_verified$&" +The deprecated &$tls_bits$& variable refers to the inbound side +except when used in the context of an outbound SMTP delivery, when it refers to +the outbound. + +.vitem &$tls_out_bits$& +.vindex "&$tls_out_bits$&" +Contains an approximation of the TLS cipher's bit-strength +on an outbound SMTP connection; the meaning of +this depends upon the TLS implementation used. +If TLS has not been negotiated, the value will be 0. + +.vitem &$tls_in_certificate_verified$& +.vindex "&$tls_in_certificate_verified$&" This variable is set to &"1"& if a TLS certificate was verified when the message was received, and &"0"& otherwise. -.vitem &$tls_cipher$& +The deprecated &$tls_certificate_verfied$& variable refers to the inbound side +except when used in the context of an outbound SMTP delivery, when it refers to +the outbound. + +.vitem &$tls_out_certificate_verified$& +.vindex "&$tls_out_certificate_verified$&" +This variable is set to &"1"& if a TLS certificate was verified when an +outbound SMTP connection was made, +and &"0"& otherwise. + +.vitem &$tls_in_cipher$& +.vindex "&$tls_in_cipher$&" .vindex "&$tls_cipher$&" When a message is received from a remote host over an encrypted SMTP connection, this variable is set to the cipher suite that was negotiated, for @@ -11899,23 +12038,39 @@ received over unencrypted connections, the variable is empty. Testing &$tls_cipher$& for emptiness is one way of distinguishing between encrypted and non-encrypted connections during ACL processing. -The &$tls_cipher$& variable retains its value during message delivery, except -when an outward SMTP delivery takes place via the &(smtp)& transport. In this -case, &$tls_cipher$& is cleared before any outgoing SMTP connection is made, +The deprecated &$tls_cipher$& variable is the same as &$tls_in_cipher$& during message reception, +but in the context of an outward SMTP delivery taking place via the &(smtp)& transport +becomes the same as &$tls_out_cipher$&. + +.vitem &$tls_out_cipher$& +.vindex "&$tls_out_cipher$&" +This variable is +cleared before any outgoing SMTP connection is made, and then set to the outgoing cipher suite if one is negotiated. See chapter &<>& for details of TLS support and chapter &<>& for details of the &(smtp)& transport. -.vitem &$tls_peerdn$& +.vitem &$tls_in_peerdn$& +.vindex "&$tls_in_peerdn$&" .vindex "&$tls_peerdn$&" When a message is received from a remote host over an encrypted SMTP connection, and Exim is configured to request a certificate from the client, the value of the Distinguished Name of the certificate is made available in the -&$tls_peerdn$& during subsequent processing. Like &$tls_cipher$&, the -value is retained during message delivery, except during outbound SMTP -deliveries. +&$tls_in_peerdn$& during subsequent processing. + +The deprecated &$tls_peerdn$& variable refers to the inbound side +except when used in the context of an outbound SMTP delivery, when it refers to +the outbound. + +.vitem &$tls_out_peerdn$& +.vindex "&$tls_out_peerdn$&" +When a message is being delivered to a remote host over an encrypted SMTP +connection, and Exim is configured to request a certificate from the server, +the value of the Distinguished Name of the certificate is made available in the +&$tls_out_peerdn$& during subsequent processing. -.vitem &$tls_sni$& +.vitem &$tls_in_sni$& +.vindex "&$tls_in_sni$&" .vindex "&$tls_sni$&" .cindex "TLS" "Server Name Indication" When a TLS session is being established, if the client sends the Server @@ -11926,8 +12081,15 @@ will be re-expanded early in the TLS session, to permit a different certificate to be presented (and optionally a different key to be used) to the client, based upon the value of the SNI extension. -The value will be retained for the lifetime of the message. During outbound -SMTP deliveries, it reflects the value of the &%tls_sni%& option on +The deprecated &$tls_sni$& variable refers to the inbound side +except when used in the context of an outbound SMTP delivery, when it refers to +the outbound. + +.vitem &$tls_out_sni$& +.vindex "&$tls_out_sni$&" +.cindex "TLS" "Server Name Indication" +During outbound +SMTP deliveries, this variable reflects the value of the &%tls_sni%& option on the transport. .vitem &$tod_bsdinbox$& @@ -12828,6 +12990,9 @@ See also the &'Policy controls'& section above. .row &%dns_ipv4_lookup%& "only v4 lookup for these domains" .row &%dns_retrans%& "parameter for resolver" .row &%dns_retry%& "parameter for resolver" +.new +.row &%dns_use_dnssec%& "parameter for resolver" +.wen .row &%dns_use_edns0%& "parameter for resolver" .row &%hold_domains%& "hold delivery for these domains" .row &%local_interfaces%& "for routing checks" @@ -13067,10 +13232,10 @@ If you want to advertise the availability of AUTH only when the connection is encrypted using TLS, you can make use of the fact that the value of this option is expanded, with a setting like this: .code -auth_advertise_hosts = ${if eq{$tls_cipher}{}{}{*}} +auth_advertise_hosts = ${if eq{$tls_in_cipher}{}{}{*}} .endd -.vindex "&$tls_cipher$&" -If &$tls_cipher$& is empty, the session is not encrypted, and the result of +.vindex "&$tls_in_cipher$&" +If &$tls_in_cipher$& is empty, the session is not encrypted, and the result of the expansion is empty, thus matching no hosts. Otherwise, the result of the expansion is *, which matches all hosts. @@ -13468,6 +13633,18 @@ to set in them. See &%dns_retrans%& above. +.new +.option dns_use_dnssec main integer -1 +.cindex "DNS" "resolver options" +.cindex "DNS" "DNSSEC" +If this option is set to a non-negative number then Exim will initialise the +DNS resolver library to either use or not use DNSSEC, overriding the system +default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on. + +If the resolver library does not support DNSSEC then this option has no effect. +.wen + + .option dns_use_edns0 main integer -1 .cindex "DNS" "resolver options" .cindex "DNS" "EDNS0" @@ -14783,7 +14960,7 @@ received_header_text = Received: \ ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\ by $primary_hostname \ ${if def:received_protocol {with $received_protocol}} \ - ${if def:tls_cipher {($tls_cipher)\n\t}}\ + ${if def:tls_in_cipher {($tls_in_cipher)\n\t}}\ (Exim $version_number)\n\t\ ${if def:sender_address \ {(envelope-from <$sender_address>)\n\t}}\ @@ -15027,7 +15204,7 @@ live with. . Allow this long option name to split; give it unsplit as a fifth argument . for the automatic .oindex that is generated by .option. -.option "smtp_accept_max_per_ &~&~connection" main integer 1000 &&& +.option "smtp_accept_max_per_connection" main integer 1000 &&& smtp_accept_max_per_connection .cindex "SMTP" "limiting incoming message count" .cindex "limit" "messages per SMTP connection" @@ -15646,7 +15823,7 @@ receiving incoming messages as a server. If you want to supply certificates for use when sending messages as a client, you must set the &%tls_certificate%& option in the relevant &(smtp)& transport. -If the option contains &$tls_sni$& and Exim is built against OpenSSL, then +If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then if the OpenSSL build supports TLS extensions and the TLS client sends the Server Name Indication extension, then this option and others documented in &<>& will be re-expanded. @@ -18362,6 +18539,18 @@ quote just the command. An item such as .endd is interpreted as a pipe with a rather strange command name, and no arguments. +.new +Note that the above example assumes that the text comes from a lookup source +of some sort, so that the quotes are part of the data. If composing a +redirect router with a &%data%& option directly specifying this command, the +quotes will be used by the configuration parser to define the extent of one +string, but will not be passed down into the redirect router itself. There +are two main approaches to get around this: escape quotes to be part of the +data itself, or avoid using this mechanism and instead create a custom +transport with the &%command%& option set and reference that transport from +an &%accept%& router. +.wen + .next .cindex "file" "in redirection list" .cindex "address redirection" "to file" @@ -21913,6 +22102,9 @@ appropriate values for the outgoing connection, and these are the values that are in force when any authenticators are run and when the &%authenticated_sender%& option is expanded. +These variables are deprecated in favour of &$tls_in_cipher$& et. al. +and will be removed in a future release. + .section "Private options for smtp" "SECID146" .cindex "options" "&(smtp)& transport" @@ -21950,7 +22142,7 @@ ignored. The expansion happens after the outgoing connection has been made and TLS started, if required. This means that the &$host$&, &$host_address$&, -&$tls_cipher$&, and &$tls_peerdn$& variables are set according to the +&$tls_out_cipher$&, and &$tls_out_peerdn$& variables are set according to the particular connection. If the SMTP session is not authenticated, the expansion of @@ -22046,6 +22238,22 @@ See the &%search_parents%& option in chapter &<>& for more details. +.new +.option dscp smtp string&!! unset +.cindex "DCSP" "outbound" +This option causes the DSCP value associated with a socket to be set to one +of a number of fixed strings or to numeric value. +The &%-bI:dscp%& option may be used to ask Exim which names it knows of. +Common values include &`throughput`&, &`mincost`&, and on newer systems +&`ef`&, &`af41`&, etc. Numeric values may be in the range 0 to 0x3F. + +The outbound packets from Exim will be marked with this value in the header +(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee +that these values will have any effect, not be stripped by networking +equipment, or do much of anything without cooperation with your Network +Engineer and those of all network operators between the source and destination. +.wen + .option fallback_hosts smtp "string list" unset .cindex "fallback" "hosts specified on transport" @@ -22179,6 +22387,13 @@ that matches this list, even if the server host advertises PIPELINING support. Exim will not try to start a TLS session when delivering to any host that matches this list. See chapter &<>& for details of TLS. +.option hosts_verify_avoid_tls smtp "host list&!!" * +.cindex "TLS" "avoiding for certain hosts" +Exim will not try to start a TLS session for a verify callout, +or when delivering in cutthrough mode, +to any host that matches this list. +Note that the default is to not use TLS. + .option hosts_max_try smtp integer 5 .cindex "host" "maximum number to try" @@ -22443,6 +22658,19 @@ This option specifies a certificate revocation list. The expanded value must be the name of a file that contains a CRL in PEM format. +.new +.option tls_dh_min_bits smtp integer 1024 +.cindex "TLS" "Diffie-Hellman minimum acceptable size" +When establishing a TLS session, if a ciphersuite which uses Diffie-Hellman +key agreement is negotiated, the server will provide a large prime number +for use. This option establishes the minimum acceptable size of that number. +If the parameter offered by the server is too small, then the TLS handshake +will fail. + +Only supported when using GnuTLS. +.wen + + .option tls_privatekey smtp string&!! unset .cindex "TLS" "client private key, location of" .vindex "&$host$&" @@ -22475,7 +22703,7 @@ ciphers is a preference order. .option tls_sni smtp string&!! unset .cindex "TLS" "Server Name Indication" .vindex "&$tls_sni$&" -If this option is set then it sets the $tls_sni variable and causes any +If this option is set then it sets the $tls_out_sni variable and causes any TLS session to pass this value as the Server Name Indication extension to the remote side, which can be used by the remote side to select an appropriate certificate and private key for the session. @@ -23747,11 +23975,8 @@ When Exim is authenticating as a client, it skips any authenticator whose used, for example, to skip plain text authenticators when the connection is not encrypted by a setting such as: .code -client_condition = ${if !eq{$tls_cipher}{}} +client_condition = ${if !eq{$tls_out_cipher}{}} .endd -(Older documentation incorrectly states that &$tls_cipher$& contains the cipher -used for incoming messages. In fact, during SMTP delivery, it contains the -cipher used for the delivery.) .option driver authenticators string unset @@ -23911,10 +24136,10 @@ authentication mechanisms. For example, it can be used to restrict the advertisement of a particular mechanism to encrypted connections, by a setting such as: .code -server_advertise_condition = ${if eq{$tls_cipher}{}{no}{yes}} +server_advertise_condition = ${if eq{$tls_in_cipher}{}{no}{yes}} .endd -.vindex "&$tls_cipher$&" -If the session is encrypted, &$tls_cipher$& is not empty, and so the expansion +.vindex "&$tls_in_cipher$&" +If the session is encrypted, &$tls_in_cipher$& is not empty, and so the expansion yields &"yes"&, which allows the advertisement to happen. When an Exim server receives an AUTH command from a client, it rejects it @@ -24979,10 +25204,11 @@ name of a directory (for OpenSSL it can be either). .next The default value for &%tls_dhparam%& differs for historical reasons. .next -.vindex "&$tls_peerdn$&" +.vindex "&$tls_in_peerdn$&" +.vindex "&$tls_out_peerdn$&" Distinguished Name (DN) strings reported by the OpenSSL library use a slash for separating fields; GnuTLS uses commas, in accordance with RFC 2253. This -affects the value of the &$tls_peerdn$& variable. +affects the value of the &$tls_in_peerdn$& and &$tls_out_peerdn$& variables. .next OpenSSL identifies cipher suites using hyphens as separators, for example: DES-CBC3-SHA. GnuTLS historically used underscores, for example: @@ -24996,6 +25222,13 @@ option). The &%tls_require_ciphers%& options operate differently, as described in the sections &<>& and &<>&. .next +.new +The &%tls_dh_min_bits%& SMTP transport option is only honoured by GnuTLS. +When using OpenSSL, this option is ignored. +(If an API is found to let OpenSSL be configured in this way, +let the Exim Maintainers know and we'll likely use it). +.wen +.next Some other recently added features may only be available in one or the other. This should be documented with the feature. If the documentation does not explicitly state that the feature is infeasible in the other TLS @@ -25282,15 +25515,13 @@ forced to fail, Exim behaves as if the option is not set. .cindex "cipher" "logging" .cindex "log" "TLS cipher" -.vindex "&$tls_cipher$&" -The variable &$tls_cipher$& is set to the cipher suite that was negotiated for +.vindex "&$tls_in_cipher$&" +The variable &$tls_in_cipher$& is set to the cipher suite that was negotiated for an incoming TLS connection. It is included in the &'Received:'& header of an incoming message (by default &-- you can, of course, change this), and it is also included in the log line that records a message's arrival, keyed by &"X="&, unless the &%tls_cipher%& log selector is turned off. The &%encrypted%& condition can be used to test for specific cipher suites in ACLs. -(For outgoing SMTP deliveries, &$tls_cipher$& is reset &-- see section -&<>&.) Once TLS has been established, the ACLs that run for subsequent SMTP commands can check the name of the cipher suite and vary their actions accordingly. The @@ -25299,6 +25530,9 @@ example, OpenSSL uses the name DES-CBC3-SHA for the cipher suite which in other contexts is known as TLS_RSA_WITH_3DES_EDE_CBC_SHA. Check the OpenSSL or GnuTLS documentation for more details. +For outgoing SMTP deliveries, &$tls_out_cipher$& is used and logged +(again depending on the &%tls_cipher%& log selector). + .section "Requesting and verifying client certificates" "SECID183" .cindex "certificate" "verification of client" @@ -25335,17 +25569,17 @@ fact that no certificate was verified, and vary their actions accordingly. For example, you can insist on a certificate before accepting a message for relaying, but not when the message is destined for local delivery. -.vindex "&$tls_peerdn$&" +.vindex "&$tls_in_peerdn$&" When a client supplies a certificate (whether it verifies or not), the value of the Distinguished Name of the certificate is made available in the variable -&$tls_peerdn$& during subsequent processing of the message. +&$tls_in_peerdn$& during subsequent processing of the message. .cindex "log" "distinguished name" Because it is often a long text string, it is not included in the log line or &'Received:'& header by default. You can arrange for it to be logged, keyed by &"DN="&, by setting the &%tls_peerdn%& log selector, and you can use &%received_header_text%& to change the &'Received:'& header. When no -certificate is supplied, &$tls_peerdn$& is empty. +certificate is supplied, &$tls_in_peerdn$& is empty. .section "Revoked certificates" "SECID184" @@ -25426,12 +25660,12 @@ All the TLS options in the &(smtp)& transport are expanded before use, with which the client is connected. Forced failure of an expansion causes Exim to behave as if the relevant option were unset. -.vindex &$tls_bits$& -.vindex &$tls_cipher$& -.vindex &$tls_peerdn$& -.vindex &$tls_sni$& +.vindex &$tls_out_bits$& +.vindex &$tls_out_cipher$& +.vindex &$tls_out_peerdn$& +.vindex &$tls_out_sni$& Before an SMTP connection is established, the -&$tls_bits$&, &$tls_cipher$&, &$tls_peerdn$& and &$tls_sni$& +&$tls_out_bits$&, &$tls_out_cipher$&, &$tls_out_peerdn$& and &$tls_out_sni$& variables are emptied. (Until the first connection, they contain the values that were set when the message was received.) If STARTTLS is subsequently successfully obeyed, these variables are set to the relevant values for the @@ -25441,8 +25675,8 @@ outgoing connection. .section "Use of TLS Server Name Indication" "SECTtlssni" .cindex "TLS" "Server Name Indication" -.vindex "&$tls_sni$&" -.oindex "&%tls_sni%&" +.vindex "&$tls_in_sni$&" +.oindex "&%tls_in_sni%&" With TLS1.0 or above, there is an extension mechanism by which extra information can be included at various points in the protocol. One of these extensions, documented in RFC 6066 (and before that RFC 4366) is @@ -25469,14 +25703,14 @@ different clients. Or even negotiate different cipher suites. The &%tls_sni%& option on an SMTP transport is an expanded string; the result, if not empty, will be sent on a TLS session as part of the handshake. There's nothing more to it. Choosing a sensible value not derived insecurely is the -only point of caution. The &$tls_sni$& variable will be set to this string +only point of caution. The &$tls_out_sni$& variable will be set to this string for the lifetime of the client connection (including during authentication). -Except during SMTP client sessions, if &$tls_sni$& is set then it is a string +Except during SMTP client sessions, if &$tls_in_sni$& is set then it is a string received from a client. It can be logged with the &%log_selector%& item &`+tls_sni`&. -If the string &`tls_sni`& appears in the main section's &%tls_certificate%& +If the string &`tls_in_sni`& appears in the main section's &%tls_certificate%& option (prior to expansion) then the following options will be re-expanded during TLS session handshake, to permit alternative values to be chosen: @@ -26490,7 +26724,7 @@ confusing to some people, so the use of &%endpass%& is no longer recommended as This modifier sets up a message that is used as part of the log message if the ACL denies access or a &%warn%& statement's conditions are true. For example: .code -require log_message = wrong cipher suite $tls_cipher +require log_message = wrong cipher suite $tls_in_cipher encrypted = DES-CBC3-SHA .endd &%log_message%& is also used when recipients are discarded by &%discard%&. For @@ -26707,6 +26941,46 @@ Notice that we put back the lower cased version afterwards, assuming that is what is wanted for subsequent tests. +.new +.vitem &*control&~=&~cutthrough_delivery*& +.cindex "&ACL;" "cutthrough routing" +This option requests delivery be attempted while the item is being received. +It is usable in the RCPT ACL and valid only for single-recipient mails forwarded +from one SMTP connection to another. If a recipient-verify callout connection is +requested in the same ACL it is held open and used for the data, otherwise one is made +after the ACL completes. + +Should the ultimate destination system positively accept or reject the mail, +a corresponding indication is given to the source system and nothing is queued. +If there is a temporary error the item is queued for later delivery in the +usual fashion. If the item is successfully delivered in cutthrough mode the log line +is tagged with ">>" rather than "=>" and appears before the acceptance "<=" +line. + +Delivery in this mode avoids the generation of a bounce mail to a (possibly faked) +sender when the destination system is doing content-scan based rejection. +.wen + + +.new +.vitem &*control&~=&~dscp/*&<&'value'&> +.cindex "&ACL;" "setting DSCP value" +.cindex "DSCP" "inbound" +This option causes the DSCP value associated with the socket for the inbound +connection to be adjusted to a given value, given as one of a number of fixed +strings or to numeric value. +The &%-bI:dscp%& option may be used to ask Exim which names it knows of. +Common values include &`throughput`&, &`mincost`&, and on newer systems +&`ef`&, &`af41`&, etc. Numeric values may be in the range 0 to 0x3F. + +The outbound packets from Exim will be marked with this value in the header +(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee +that these values will have any effect, not be stripped by networking +equipment, or do much of anything without cooperation with your Network +Engineer and those of all network operators between the source and destination. +.wen + + .vitem &*control&~=&~debug/*&<&'options'&> .cindex "&ACL;" "enabling debug logging" .cindex "debugging" "enabling from an ACL" @@ -28794,16 +29068,16 @@ Suppose your LAN is 192.168.45.0/24. In the main part of the configuration, you put the following definitions: .code -domainlist local_domains = my.dom1.example : my.dom2.example -domainlist relay_domains = friend1.example : friend2.example -hostlist relay_hosts = 192.168.45.0/24 +domainlist local_domains = my.dom1.example : my.dom2.example +domainlist relay_to_domains = friend1.example : friend2.example +hostlist relay_from_hosts = 192.168.45.0/24 .endd Now you can use these definitions in the ACL that is run for every RCPT command: .code acl_check_rcpt: - accept domains = +local_domains : +relay_domains - accept hosts = +relay_hosts + accept domains = +local_domains : +relay_to_domains + accept hosts = +relay_from_hosts .endd The first statement accepts any RCPT command that contains an address in the local or relay domains. For any other domain, control passes to the second @@ -31415,6 +31689,8 @@ required for the transaction. If the remote server advertises support for the STARTTLS command, and Exim was built to support TLS encryption, it tries to start a TLS session unless the server matches &%hosts_avoid_tls%&. See chapter &<>& for more details. +Either a match in that or &%hosts_verify_avoid_tls%& apply when the transport +is called for verification. If the remote server advertises support for the AUTH command, Exim scans the authenticators configuration for any suitable client settings, as described