X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/8523533c08c018ac4b750b0e0fab6cfe611e8a49..d7148a072a5fee80ffa8d1aeebf9bc05d0e903b4:/src/OS/Makefile-Base diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base index 4e928322f..281294558 100644 --- a/src/OS/Makefile-Base +++ b/src/OS/Makefile-Base @@ -1,5 +1,3 @@ -# $Cambridge: exim/src/OS/Makefile-Base,v 1.2 2004/12/16 15:11:47 tom Exp $ - # This file is the basis of the main makefile for Exim and friends. The # makefile at the top level arranges to build the main makefile by calling # scripts/Configure-Makefile from within the build directory. This @@ -18,6 +16,13 @@ EXIMON_EDITME = ../Local/eximon.conf LNCC = $(CC) +# The compile commands can be very long. To make the output look better, +# they are not normally echoed in full. To get full echoing, the caller +# must set FULLECHO='' on the command line and call make with -e. We default +# FULLECHO to '@' to suppress the full echo. Then define an abbreviation. + +FULLECHO = @ +FE = $(FULLECHO) # The default target double-checks the existence of $(EDITME) and then arranges # to touch it if it exists and any of the optional configuration files, which @@ -27,7 +32,7 @@ LNCC = $(CC) # up-to-date. Then the os-specific source files and the C configuration file # are set up, and finally it goes to the main Exim target. -all: $(EDITME) checklocalmake Makefile os.h os.c config.h allexim +all: $(EDITME) checklocalmake Makefile os.h os.c config.h version.h allexim checklocalmake: @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \ @@ -81,7 +86,7 @@ os.c: ../src/os.c # Build the config.h file. config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME) - $(SHELL) $(SCRIPTS)/Configure-config.h + $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)" # This target is recognized specially by GNU make. It records those targets @@ -89,31 +94,32 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME) # therefore always be run, even if the files exist. This shouldn't in fact be a # problem, but it does no harm. Other make programs will just ignore this. -.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \ +.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \ buildtransports checklocalmake clean # This is the real default target for all the various exim binaries and # scripts, once the configuring stuff is done. -allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \ +allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \ exigrep eximstats exipick exiqgrep exiqsumm \ transport-filter.pl convert4r3 convert4r4 \ exim_checkaccess \ exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \ buildlookups buildrouters buildtransports \ - buildauths exim + buildauths buildpdkim exim # Targets for special-purpose configuration header builders buildconfig: buildconfig.c - $(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS) + @echo "$(CC) buildconfig.c" + $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS) # Target for the exicyclog utility script exicyclog: Makefile config.h ../src/exicyclog.src @rm -f exicyclog - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -124,19 +130,21 @@ exicyclog: Makefile config.h ../src/exicyclog.src -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \ -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \ -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \ - -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \ -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \ + -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \ + -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \ -e "s?MV_COMMAND?$(MV_COMMAND)?" \ -e "s?RM_COMMAND?$(RM_COMMAND)?" \ + -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \ ../src/exicyclog.src > exicyclog-t @mv exicyclog-t exicyclog @chmod a+x exicyclog - @echo ">>> exicyclog script built"; echo "" + @echo ">>> exicyclog script built" # Target for the exinext utility script exinext: Makefile config.h ../src/exinext.src @rm -f exinext - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -146,12 +154,12 @@ exinext: Makefile config.h ../src/exinext.src ../src/exinext.src > exinext-t @mv exinext-t exinext @chmod a+x exinext - @echo ">>> exinext script built"; echo "" + @echo ">>> exinext script built" # Target for the exiwhat utility script exiwhat: Makefile config.h ../src/exiwhat.src @rm -f exiwhat - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -167,12 +175,12 @@ exiwhat: Makefile config.h ../src/exiwhat.src ../src/exiwhat.src > exiwhat-t @mv exiwhat-t exiwhat @chmod a+x exiwhat - @echo ">>> exiwhat script built"; echo "" + @echo ">>> exiwhat script built" # Target for the exim_checkaccess utility script exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src @rm -f exim_checkaccess - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -190,7 +198,7 @@ eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \ ../Local/eximon.conf @rm -f eximon $(SHELL) $(SCRIPTS)/Configure-eximon - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -208,7 +216,7 @@ eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \ exigrep: Makefile ../src/exigrep.src @rm -f exigrep - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -218,20 +226,20 @@ exigrep: Makefile ../src/exigrep.src ../src/exigrep.src > exigrep-t @mv exigrep-t exigrep @chmod a+x exigrep - @echo ">>> exigrep script built"; echo "" + @echo ">>> exigrep script built" eximstats: Makefile ../src/eximstats.src @rm -f eximstats - sed \ + @sed \ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ ../src/eximstats.src > eximstats-t @mv eximstats-t eximstats @chmod a+x eximstats - @echo ">>> eximstats script built"; echo "" + @echo ">>> eximstats script built" exiqgrep: Makefile ../src/exiqgrep.src @rm -f exiqgrep - sed \ + @sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -240,48 +248,48 @@ exiqgrep: Makefile ../src/exiqgrep.src ../src/exiqgrep.src > exiqgrep-t @mv exiqgrep-t exiqgrep @chmod a+x exiqgrep - @echo ">>> exiqgrep script built"; echo "" + @echo ">>> exiqgrep script built" exiqsumm: Makefile ../src/exiqsumm.src @rm -f exiqsumm - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ ../src/exiqsumm.src > exiqsumm-t @mv exiqsumm-t exiqsumm @chmod a+x exiqsumm - @echo ">>> exiqsumm script built"; echo "" + @echo ">>> exiqsumm script built" exipick: Makefile ../src/exipick.src @rm -f exipick - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \ ../src/exipick.src > exipick-t @mv exipick-t exipick @chmod a+x exipick - @echo ">>> exipick script built"; echo "" + @echo ">>> exipick script built" transport-filter.pl: Makefile ../src/transport-filter.src @rm -f transport-filter.pl - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ ../src/transport-filter.src > transport-filter.pl-t @mv transport-filter.pl-t transport-filter.pl @chmod a+x transport-filter.pl - @echo ">>> transport-filter.pl script built"; echo "" + @echo ">>> transport-filter.pl script built" convert4r3: Makefile ../src/convert4r3.src @rm -f convert4r3 - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ ../src/convert4r3.src > convert4r3-t @mv convert4r3-t convert4r3 @chmod a+x convert4r3 - @echo ">>> convert4r3 script built"; echo "" + @echo ">>> convert4r3 script built" convert4r4: Makefile ../src/convert4r4.src @rm -f convert4r4 - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ ../src/convert4r4.src > convert4r4-t @mv convert4r4-t convert4r4 @chmod a+x convert4r4 - @echo ">>> convert4r4 script built"; echo "" + @echo ">>> convert4r4 script built" # These are objects of optional features. They are always compiled, but @@ -290,37 +298,35 @@ convert4r4: Makefile ../src/convert4r4.src OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o OBJ_WITH_OLD_DEMIME = demime.o -OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o +OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o # Targets for final binaries; the main one has a build number which is # updated each time. We don't bother with that for the auxiliaries. +OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o + OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \ - filtertest.o globals.o \ + filtertest.o globals.o dkim.o \ header.o host.o ip.o log.o lss.o match.o moan.o \ os.o parse.o queue.o \ rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \ route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \ - store.o string.o tls.o tod.o transport.o tree.o verify.o \ + std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \ + $(OBJ_LOOKUPS) \ local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \ - $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL) + $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL) -exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \ +exim: lookups/lookups.a auths/auths.a pdkim/pdkim.a \ routers/routers.a transports/transports.a \ - $(OBJ_EXIM) version.c - @echo " " - awk '{ print ($$1+1) }' cnumber.h > cnumber.temp - rm -f cnumber.h; mv cnumber.temp cnumber.h - $(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c - rm -f exim - $(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \ - pcre/libpcre.a \ + $(OBJ_EXIM) version.o + @echo "$(LNCC) -o exim" + $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \ routers/routers.a transports/transports.a lookups/lookups.a \ - auths/auths.a \ + auths/auths.a pdkim/pdkim.a \ $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \ $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \ - $(PERL_LIBS) $(TLS_LIBS) $(LDFLAGS) + $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim; \ $(STRIP_COMMAND) exim; \ @@ -335,13 +341,13 @@ exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \ OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o exim_dumpdb: $(OBJ_DUMPDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \ + @echo "$(LNCC) -o exim_dumpdb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_dumpdb; \ $(STRIP_COMMAND) exim_dumpdb; \ fi - @echo " " @echo ">>> exim_dumpdb utility built" @echo " " @@ -349,14 +355,14 @@ exim_dumpdb: $(OBJ_DUMPDB) OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o -exim_fixdb: $(OBJ_FIXDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \ - $(LIBS) $(EXTRALIBS) $(DBMLIB) +exim_fixdb: $(OBJ_FIXDB) auths/auths.a + @echo "$(LNCC) -o exim_fixdb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \ + auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_fixdb; \ $(STRIP_COMMAND) exim_fixdb; \ fi - @echo " " @echo ">>> exim_fixdb utility built" @echo " " @@ -365,40 +371,41 @@ exim_fixdb: $(OBJ_FIXDB) OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o exim_tidydb: $(OBJ_TIDYDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \ + @echo "$(LNCC) -o exim_tidydb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_tidydb; \ $(STRIP_COMMAND) exim_tidydb; \ fi - @echo " " @echo ">>> exim_tidydb utility built" @echo " " # The utility for building dbm files exim_dbmbuild: exim_dbmbuild.o - $(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \ + @echo "$(LNCC) -o exim_dbmbuild" + $(FE)$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_dbmbuild; \ $(STRIP_COMMAND) exim_dbmbuild; \ fi - @echo " " @echo ">>> exim_dbmbuild utility built" @echo " " # The utility for locking a mailbox while messing around with it exim_lock: exim_lock.c - $(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c - $(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \ + @echo "$(CC) exim_lock.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c + @echo "$(LNCC) -o exim_lock" + $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \ $(LIBS) $(EXTRALIBS) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_lock; \ $(STRIP_COMMAND) exim_lock; \ fi - @echo " " @echo ">>> exim_lock utility built" @echo " " @@ -418,18 +425,19 @@ MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \ OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN) -eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \ +eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \ ../exim_monitor/em_version.c - $(CC) -o em_version.o -c \ + @echo "$(CC) exim_monitor/em_version.c" + $(FE)$(CC) -o em_version.o -c \ $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c - $(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \ - $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \ + @echo "$(LNCC) -o eximon.bin" + $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \ + $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \ $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) eximon.bin; \ $(STRIP_COMMAND) eximon.bin; \ fi - @echo " " @echo ">>> exim monitor binary built" @echo " " @@ -444,7 +452,17 @@ HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h gl PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h .SUFFIXES: .o .c -.c.o:; $(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c +.c.o:; @echo "$(CC) $*.c" + $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c + +# Update Exim's version information and build the version object. + +version.h:: + @../scripts/reversion + +cnumber.h: version.h + +version.o: $(HDRS) cnumber.h version.h version.c # This is the dummy module for use by test compiles of individual modules. It # contains functions such as log_write() that may be called from bits of Exim @@ -455,24 +473,28 @@ dummies.o: dummies.c # Compile instructions for perl.o for when EXIM_PERL is set perl.o: $(HDRS) perl.c - $(PERL_CC) $(PERL_CCOPTS) $(INCLUDE) -c perl.c + @echo "$(PERL_CC) perl.c" + $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c # Compile instructions for the database utility modules exim_dumpdb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_DUMPDB \ -o exim_dumpdb.o exim_dbutil.c exim_fixdb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_FIXDB \ -o exim_fixdb.o exim_dbutil.c exim_tidydb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_TIDYDB \ -o exim_tidydb.o exim_dbutil.c @@ -480,22 +502,27 @@ exim_tidydb.o: $(HDRS) exim_dbutil.c # Compile instructions for exim_dbmbuild exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c - $(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c + @echo "$(CC) exim_dbmbuild.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c # Utilities use special versions of some modules - typically with debugging # calls cut out. util-spool_in.o: $(HDRS) spool_in.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c + @echo "$(CC) -DCOMPILE_UTILITY spool_in.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c util-store.o: $(HDRS) store.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c + @echo "$(CC) -DCOMPILE_UTILITY store.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c util-string.o: $(HDRS) string.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c + @echo "$(CC) -DCOMPILE_UTILITY string.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c util-os.o: $(HDRS) os.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DCOMPILE_UTILITY os.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DOS_LOAD_AVERAGE \ -DFIND_RUNNING_INTERFACES \ @@ -504,8 +531,9 @@ util-os.o: $(HDRS) os.c # The local scan module depends only on its own special header, and is compiled # from a source whose location is set by configuration. -local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE) - $(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE) +local_scan.o: Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE) + @echo "$(CC) local_scan.c" + $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE) # Dependencies for the "ordinary" exim modules @@ -547,6 +575,7 @@ smtp_in.o: $(HDRS) smtp_in.c smtp_out.o: $(HDRS) smtp_out.c spool_in.o: $(HDRS) spool_in.c spool_out.o: $(HDRS) spool_out.c +std-crypto.o: $(HDRS) std-crypto.c store.o: $(HDRS) store.c string.o: $(HDRS) string.c tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c @@ -554,7 +583,7 @@ tod.o: $(HDRS) tod.c transport.o: $(HDRS) transport.c tree.o: $(HDRS) tree.c verify.o: $(HDRS) verify.c - +dkim.o: $(HDRS) dkim.c # Dependencies for WITH_CONTENT_SCAN modules @@ -573,9 +602,9 @@ demime.o: $(HDRS) demime.c # Dependencies for EXPERIMENTAL_* modules bmi_spam.o: $(HDRS) bmi_spam.c -spf.o: $(HDRS) spf.c -srs.o: $(HDRS) srs.c - +spf.o: $(HDRS) spf.h spf.c +srs.o: $(HDRS) srs.h srs.c +dcc.o: $(HDRS) dcc.h dcc.c # The module containing tables of available lookups, routers, auths, and # transports must be rebuilt if any of them are. However, because the makefiles @@ -587,6 +616,11 @@ srs.o: $(HDRS) srs.c drtables.o: $(HDRS) drtables.c +# We depend upon object files built as part of building the lookups library +# When using parallel make, we don't have the dependency to force building +# in the sub-directory unless we force that dependency: + +$(OBJ_LOOKUPS): buildlookups # The exim monitor's private modules - the sources live in a private # subdirectory. The final binary combines the private modules with some @@ -605,68 +639,53 @@ em_text.o: ../exim_monitor/em_text.c ../exim_monitor/em_hdr.h em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h $(MONBIN): $(HDRS) - $(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \ + @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`" + $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \ ../exim_monitor/`echo $@ | sed 's/o$$/c/'` -# Targets for the various libraries that Exim uses. This coding is tedious, -# because different versions of "make" behave in different ways with regard -# to rebuilding. If these target names are of the form pcre/libpcre.a, for -# example, then a forcing mechanism is required to get them obeyed each time. -# That's fine on Solaris and other systems; the rebuilding of the exim target -# happens only if the libraries are actually rebuilt. However, on IRIX, if -# the target is forced, the exim target gets unnecessarily rebuilt even if -# the .a file is not. Contrariwise, if we use dummy names, they don't interact -# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get -# rebuilt when it should. (For the others it does, because they remove -# drtables.o when they rebuild.) To get round this, we forcibly remove the -# binary when it needs to be rebuilt. - -# The PCRE regex library. Move the pcretest program to the util directory. Some -# "clever" versions of make notice that there are two successive shell -# commands, and they run them in the same shell. This means that we have to -# take care to encapsulate change of directory in parentheses, so that it -# reverts when it should. - -buildpcre: - @(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \ - CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)") - @if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \ - rm -f exim eximon.bin; fi +# Targets for the various libraries that Exim uses. # The lookups library. -buildlookups: - @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \ - echo " " +buildlookups lookups/lookups.a: config.h version.h + @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)" + @echo " " # The routers library. -buildrouters: - @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildrouters routers/routers.a: config.h + @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The transports library. -buildtransports: - @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildtransports transports/transports.a: config.h + @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The library of authorization modules -buildauths: - @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildauths auths/auths.a: config.h + @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " + +# The PDKIM library + +buildpdkim pdkim/pdkim.a: config.h + @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The "clean", "install", and "makefile" targets just pass themselves back to # the main Exim makefile. These targets will be obeyed only if "make" is obeyed @@ -702,15 +721,16 @@ test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \ tod.o version.o $(LIBS) $(DBMLIB) rm -f dbfn.o -test_host: config.h host.c dns.c dummies.o sa-globals.o sa-os.o store.o \ - string.o tod.o tree.o +test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \ + store.o string.o tod.o tree.o + $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c $(LNCC) -o test_host $(LFLAGS) \ - host.o dns.o dummies.o sa-globals.o os.o store.o string.o tod.o tree.o \ - $(LIBS) $(LIBRESOLV) - rm -f dummies.o host.o dns.o + host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \ + tod.o tree.o $(LIBS) $(LIBRESOLV) + rm -f child.o dummies.o host.o dns.o test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c