X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/846430d945e9056842ad7f12f85d43435d78baf0..78f724988aa415bdc8da24bf91fb2d1e22d125fc:/test/runtest

diff --git a/test/runtest b/test/runtest
index 62ab01bac..face0dd45 100755
--- a/test/runtest
+++ b/test/runtest
@@ -83,6 +83,10 @@ $parm_port_d4 = 1228;        # Additional for daemon
 # Manually set locale
 $ENV{'LC_ALL'} = 'C';
 
+# In some environments USER does not exists, but we
+# need it for some test(s)
+$ENV{USER} = getpwuid($>)
+  if not exists $ENV{USER};
 
 
 ###############################################################################
@@ -767,6 +771,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # different wording in the error messages, so we cannot compare them.
 
   s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  next if /SSL verify error: depth=0 error=certificate not trusted/;
 
   # ======== Maildir things ========
   # timestamp output in maildir processing
@@ -853,6 +858,11 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^SSL info: unknown state/;
     next if /^SSL info: SSLv2\/v3 write client hello A/;
     next if /^SSL info: SSLv3 read server key exchange A/;
+    next if /SSL verify error: depth=0 error=certificate not trusted/;
+    s/SSL3_READ_BYTES/ssl3_read_bytes/;
+
+    # gnutls version variances
+    next if /^Error in the pull function./;
     }
 
   # ======== stderr ========
@@ -870,7 +880,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
-    s/\bgethostbyname2?|\bgetipnodebyname/get[host|ipnode]byname[2]/;
+    s/\b(gethostbyname2?|\bgetipnodebyname)(\(af=inet\))?/get[host|ipnode]byname[2]/;
 
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
@@ -948,7 +958,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # are unset, because tls ain't always there.
 
     next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
-                \sno\s\(option\sunset\)/x;
+                \sno\s\((option\sunset|end\sof\slist)\)/x;
 
     # Skip auxiliary group lists because they will vary.
 
@@ -1014,11 +1024,17 @@ RESET_AFTER_EXTRA_LINE_READ:
         @saved = ();
         }
 
+    # remote port numbers vary
+    s/(Connection request from 127.0.0.1 port) \d{1,5}/$1 sssss/;
+
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
 
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
+    # SUPPORT_PROXY
+    next if /host in hosts_proxy\?/;
+
     # Experimental_International
     next if / in smtputf8_advertise_hosts\? no \(option unset\)/;
 
@@ -1355,9 +1371,6 @@ $munges =
     'optional_ocsp' =>
     { 'stderr' => '/127.0.0.1 in hosts_requ(ire|est)_ocsp/' },
 
-    'no_tpt_filter_epipe' =>
-    { 'stderr' => '/^writing error 32: Broken pipe$/' },
-
     'optional_cert_hostnames' =>
     { 'stderr' => '/in tls_verify_cert_hostnames\? no/' },
 
@@ -1370,6 +1383,29 @@ $munges =
     'delay_1500' =>
     { 'stderr' => 's/(1[5-9]|23\d)\d\d msec/ssss msec/' },
 
+    'tls_anycipher' =>
+    { 'mainlog' => 's/ X=TLS\S+ / X=TLS_proto_and_cipher /' },
+
+    'debug_pid' =>
+    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+
+    'optional_dsn_info' =>
+    { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
+    },
+
+    'optional_config' =>
+    { 'stdout' => '/^(
+                  dkim_(canon|domain|private_key|selector|sign_headers|strict)
+                  |gnutls_require_(kx|mac|protocols)
+                  |hosts_(requ(est|ire)|try)_(dane|ocsp)
+                  |hosts_(avoid|nopass|require|verify_avoid)_tls
+                  |socks_proxy
+                  |tls_[^ ]*
+                  )($|[ ]=)/x' },
+
+    'sys_bindir' =>
+    { 'mainlog' => 's%/(usr/)?bin/%SYSBINDIR/%' },
+
   };
 
 
@@ -2048,12 +2084,12 @@ if (/^client/ || /^(sudo\s+)?perl\b/)
 # not drop privilege when -C and -D options are present. To run the exim
 # command as root, we use sudo.
 
-elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
+elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+)?\s+(.*)$/)
   {
-  $args = $5;
+  $args = $6;
   my($envset) = (defined $1)? $1      : "";
-  my($sudo)   = (defined $3)? "sudo " : "";
-  my($special)= (defined $4)? $4      : "";
+  my($sudo)   = (defined $3)? "sudo " . (defined $4 ? "-u $4 ":"")  : "";
+  my($special)= (defined $5)? $5      : "";
   $wait_time  = (defined $2)? $2      : 0;
 
   # Return 2 rather than 1 afterwards
@@ -2113,7 +2149,6 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
          "-DEXIM_PATH=$parm_cwd/eximdir/exim$special " .
          "-C $parm_cwd/test-config $args " .
          ">>test-stdout 2>>test-stderr";
-
   # If the command is starting an Exim daemon, we run it in the same
   # way as the "server" command above, that is, we don't want to wait
   # for the process to finish. That happens when "killdaemon" is obeyed later
@@ -2191,6 +2226,45 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     }
   }
 
+# The "background" command is run but not waited-for, like exim -DSERVER=server.
+# One script line is read and fork-exec'd.  The PID is stored for a later
+# killdaemon.
+
+elsif (/^background$/)
+  {
+  my $line;
+#  $pidfile = "$parm_cwd/aux-var/server-daemon.pid";
+
+  $_ = <SCRIPT>; $lineno++;
+  chomp;
+  $line = $_;
+  if ($debug) { printf ">> daemon: $line >>test-stdout 2>>test-stderr\n"; }
+
+  my $pid = fork();
+  if (not defined $pid) { die "** fork failed: $!\n" }
+  if (not $pid) {
+    print "[$$]>> ${line}\n" if ($debug);
+    close(STDIN);
+    open(STDIN, "<", "test-stdout");
+    close(STDOUT);
+    open(STDOUT, ">>", "test-stdout");
+    close(STDERR);
+    open(STDERR, ">>", "test-stderr-server");
+    exec "exec ${line}";
+    exit(1);
+  }
+
+#  open(my $fh, ">", $pidfile) ||
+#      tests_exit(-1, "Failed to open $pidfile: $!");
+#  printf($fh, "%d\n", $pid);
+#  close($fh);
+
+  while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
+  select(undef, undef, undef, 0.3);             # Let the daemon get going
+  return (3, { exim_pid => $pid });             # Don't wait
+  }
+
+
 
 # Unknown command
 
@@ -2379,7 +2453,7 @@ if ($parm_exim eq "")
     # directory. Thus, we should choose the highest version of Exim that has
     # been compiled.
 
-    if ($f eq "exim4" || $f eq "exim-snapshot")
+    if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
       { $srcdir = $f; }
     else
       { $srcdir = $f
@@ -2445,8 +2519,13 @@ if ($parm_exim eq "")
 
 # deal with TRUSTED_CONFIG_LIST restrictions
 unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
-symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
-  or die "Unable to link initial config into place: $!\n";
+open (IN, "$parm_cwd/confs/0000") ||
+  tests_exit(-1, "Couldn't open $parm_cwd/confs/0000: $!\n");
+open (OUT, ">test-config") ||
+  tests_exit(-1, "Couldn't open test-config: $!\n");
+while (<IN>) { print OUT; }
+close(IN);
+close(OUT);
 
 print("Probing with config file: $parm_cwd/test-config\n");
 open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
@@ -2457,6 +2536,7 @@ while(<EXIMINFO>)
   $parm_eximuser = $1 if /^exim_user = (.*)$/;
   $parm_eximgroup = $1 if /^exim_group = (.*)$/;
   $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
+  print "$_" if /wrong owner/;
   }
 close(EXIMINFO);
 
@@ -2507,7 +2587,7 @@ else
   die "Unable to check the TRUSTED_CONFIG_LIST, seems to be empty?\n";
   }
 
-open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
+open(EXIMINFO, "$parm_exim -d-all+transport -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
   die "** Cannot run $parm_exim: $!\n";
 
 print "-" x 78, "\n";
@@ -2516,7 +2596,7 @@ while (<EXIMINFO>)
   {
   my(@temp);
 
-  if (/^Exim version/) { print; }
+  if (/^(Exim|Library) version/) { print; }
 
   elsif (/^Size of off_t: (\d+)/)
     {
@@ -2785,6 +2865,22 @@ if (defined $parm_support{'Content_Scanning'})
   }
 
 
+##################################################
+#       Check for redis                          #
+##################################################
+if (defined $parm_lookups{'redis'})
+  {
+  if (system("redis-server -v 2>/dev/null >/dev/null") == 0)
+    {
+    print "The redis-server command works\n";
+    $parm_running{'redis'} = ' ';
+    }
+  else
+    {
+    print "The redis-server command failed: assume Redis not installed\n";
+    }
+  }
+
 ##################################################
 #         Test for the basic requirements        #
 ##################################################
@@ -2903,7 +2999,7 @@ while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;
-    next if ($ip =~ /^127\./);
+    next if ($ip =~ /^127\./ || $ip =~ /^10\./);
     $parm_ipv4 = $ip;
     }
 
@@ -3725,6 +3821,7 @@ $0 = "[runtest $testno]";
 
   # The script has finished. Check the all the output that was generated. The
   # function returns 0 if all is well, 1 if we should rerun the test (the files
+  # function returns 0 if all is well, 1 if we should rerun the test (the files
   # have been updated). It does not return if the user responds Q to a prompt.
 
   if ($retry)