X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/3d240ff7fc19b7a28641d2aaa6999ac30ccd5a64..75b1493f48e2212184289338fa4c42941ac8d426:/doc/doc-txt/NewStuff?ds=sidebyside diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 8338b2371..04177227d 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,197 +1,446 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.97 2006/03/16 11:51:09 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/NewStuff,v 1.140 2007/02/07 12:23:35 ph10 Exp $ New Features in Exim -------------------- -This file contains descriptions of new features that have been added to Exim, -but have not yet made it into the main manual (which is most conveniently -updated when there is a relatively large batch of changes). The doc/ChangeLog -file contains a listing of all changes, including bug fixes. +This file contains descriptions of new features that have been added to Exim. +Before a formal release, there may be quite a lot of detail so that people can +test from the snapshots or the CVS before the documentation is updated. Once +the documentation is updated, this file is reduced to a short list. + +Version 4.67 +------------ + + 1. There is a new log selector called smtp_no_mail, which is not included in + the default setting. When it is set, a line is written to the main log + whenever an accepted SMTP connection terminates without having issued a + MAIL command. This includes both the case when the connection is dropped, + and the case when QUIT is used. Note that it does not include cases where + the connection is rejected right at the start (by an ACL, or because there + are too many connections, or whatever). These cases already have their own + log lines. + + The log line that is written contains the identity of the client in the + usual way, followed by D= and a time, which records the duration of the + connection. If the connection was authenticated, this fact is logged + exactly as it is for an incoming message, with an A= item. If the + connection was encrypted, CV=, DN=, and X= items may appear as they do for + an incoming message, controlled by the same logging options. + + Finally, if any SMTP commands were issued during the connection, a C= item + is added to the line, listing the commands that were used. For example, + + C=EHLO,QUIT + + shows that the client issued QUIT straight after EHLO. If there were fewer + than 20 commands, they are all listed. If there were more than 20 commands, + the last 20 are listed, preceded by "...". However, with the default + setting of 10 for smtp_accep_max_nonmail, the connection will in any case + be aborted before 20 non-mail commands are processed. + + 2. When an item in a dnslists list is followed by = and & and a list of IP + addresses, in order to restrict the match to specific results from the DNS + lookup, the behaviour was not clear when the lookup returned more than one + IP address. For example, consider the condition + + dnslists = a.b.c=127.0.0.1 + + What happens if the DNS lookup for the incoming IP address yields both + 127.0.0.1 and 127.0.0.2 by means of two separate DNS records? Is the + condition true because at least one given value was found, or is it false + because at least one of the found values was not listed? And how does this + affect negated conditions? + + The behaviour of = and & has not been changed; however, the text below + documents it more clearly. In addition, two new additional conditions (== + and =&) have been added, to permit the "other" behaviour to be configured. + + A DNS lookup may yield more than one record. Thus, the result of the lookup + for a dnslists check may yield more than one IP address. The question then + arises as to whether all the looked up addresses must be listed, or whether + just one is good enough. Both possibilities are provided for: + + . If = or & is used, the condition is true if any one of the looked up + IP addresses matches one of the listed addresses. Consider: + + dnslists = a.b.c=127.0.0.1 + + If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is + true because 127.0.0.1 matches. + + . If == or =& is used, the condition is true only if every one of the + looked up IP addresses matches one of the listed addresses. Consider: + + dnslists = a.b.c==127.0.0.1 + + If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is + false because 127.0.0.2 is not listed. You would need to have + + dnslists = a.b.c==127.0.0.1,127.0.0.2 + + for the condition to be true. + + When ! is used to negate IP address matching, it inverts the result, giving + the precise opposite of the behaviour above. Thus: + + . If != or !& is used, the condition is true if none of the looked up IP + addresses matches one of the listed addresses. Consider: + + dnslists = a.b.c!&0.0.0.1 + + If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is + false because 127.0.0.1 matches. + + . If !== or !=& is used, the condition is true there is at least one looked + up IP address that does not match. Consider: + + dnslists = a.b.c!=&0.0.0.1 + + If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is + true, because 127.0.0.2 does not match. You would need to have + + dnslists = a.b.c!=&0.0.0.1,0.0.0.2 + + for the condition to be false. + + When the DNS lookup yields only a single IP address, there is no difference + between = and == and between & and =&. + + 3. Up till now, the only control over which cipher suites GnuTLS uses has been + for the cipher algorithms. New options have been added to allow some of the + other parameters to be varied. Here is complete documentation for the + available features: + + GnuTLS allows the caller to specify separate lists of permitted key + exchange methods, main cipher algorithms, and MAC algorithms. These may be + used in any combination to form a specific cipher suite. This is unlike + OpenSSL, where complete cipher names can be passed to its control function. + GnuTLS also allows a list of acceptable protocols to be supplied. + + For compatibility with OpenSSL, the tls_require_ciphers option can be set + to complete cipher suite names such as RSA_ARCFOUR_SHA, but for GnuTLS this + option controls only the cipher algorithms. Exim searches each item in the + list for the name of an available algorithm. For example, if the list + contains RSA_AES_SHA, then AES is recognized, and the behaviour is exactly + the same as if just AES were given. + + There are additional options called gnutls_require_kx, gnutls_require_mac, + and gnutls_require_protocols that can be used to restrict the key exchange + methods, MAC algorithms, and protocols, respectively. These options are + ignored if OpenSSL is in use. + + All four options are available as global options, controlling how Exim + behaves as a server, and also as options of the smtp transport, controlling + how Exim behaves as a client. All the values are string expanded. After + expansion, the values must be colon-separated lists, though the separator + can be changed in the usual way. + + Each of the four lists starts out with a default set of algorithms. If the + first item in one of the "require" options does _not_ start with an + exclamation mark, all the default items are deleted. In this case, only + those that are explicitly specified can be used. If the first item in one + of the "require" items _does_ start with an exclamation mark, the defaults + are left on the list. + + Then, any item that starts with an exclamation mark causes the relevant + entry to be removed from the list, and any item that does not start with an + exclamation mark causes a new entry to be added to the list. Unrecognized + items in the list are ignored. Thus: + + tls_require_ciphers = !ARCFOUR + + allows all the defaults except ARCFOUR, whereas + + tls_require_ciphers = AES : 3DES + + allows only cipher suites that use AES or 3DES. For tls_require_ciphers + the recognized names are AES_256, AES_128, AES (both of the preceding), + 3DES, ARCFOUR_128, ARCFOUR_40, and ARCFOUR (both of the preceding). The + default list does not contain all of these; it just has AES_256, AES_128, + 3DES, and ARCFOUR_128. + + For gnutls_require_kx, the recognized names are DHE_RSA, RSA (which + includes DHE_RSA), DHE_DSS, and DHE (which includes both DHE_RSA and + DHE_DSS). The default list contains RSA, DHE_DSS, DHE_RSA. + + For gnutls_require_mac, the recognized names are SHA (synonym SHA1), and + MD5. The default list contains SHA, MD5. + + For gnutls_require_protocols, the recognized names are TLS1 and SSL3. + The default list contains TLS1, SSL3. + + In a server, the order of items in these lists is unimportant. The server + will advertise the availability of all the relevant cipher suites. However, + in a client, the order in the tls_require_ciphers list specifies a + preference order for the cipher algorithms. The first one in the client's + list that is also advertised by the server is tried first. + + 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. You must + not set this option unless you really, really, really understand what you + are doing. No pre-compiled distributions of Exim should ever set this + option. When it is set, Exim compiles a runtime option called + disable_fsync. If this is set true, Exim no longer calls fsync() to force + updated files' data to be written to disc. Unexpected events such as + crashes and power outages may cause data to be lost or scrambled. Beware. + + When ENABLE_DISABLE_FSYNC is not set, a reference to disable_fsync in a + runtime configuration generates an "unknown option" error. + + 5. There is a new variable called $smtp_count_at_connection_start. The name + is deliberately long, in order to emphasize what the contents are. This + variable is set greater than zero only in processes spawned by the Exim + daemon for handling incoming SMTP connections. When the daemon accepts a + new connection, it increments this variable. A copy of the variable is + passed to the child process that handles the connection, but its value is + fixed, and never changes. It is only an approximation of how many incoming + connections there actually are, because many other connections may come and + go while a single connection is being processed. When a child process + terminates, the daemon decrements the variable. + + 6. There's a new control called no_pipelining, which does what its name + suggests. It turns off the advertising of the PIPELINING extension to SMTP. + To be useful, this control must be obeyed before Exim sends its response to + an EHLO command. Therefore, it should normally appear in an ACL controlled + by acl_smtp_connect or acl_smtp_helo. + + 7. There are two new variables called $sending_ip_address and $sending_port. + These are set whenever an SMTP connection to another host has been set up, + and they contain the IP address and port of the local interface that is + being used. They are of interest only on hosts that have more than on IP + address that want to take on different personalities depending on which one + is being used. + + 8. The expansion of the helo_data option in the smtp transport now happens + after the connection to the server has been made. This means that it can + use the value of $sending_ip_address (see 7 above) to vary the text of the + message. For example, if you want the string that is used for helo_data to + be obtained by a DNS lookup of the interface address, you could use this: + + helo_data = ${lookup dnsdb{ptr=$sending_ip_address}{$value}\ + {$primary_hostname}} + + The use of helo_data applies both to sending messages and when doing + callouts. + + 9. There is a new expansion operator ${rfc2047d: that decodes strings that + are encoded as per RFC 2047. Binary zero bytes are replaced by question + marks. Characters are converted into the character set defined by + headers_charset. Overlong RFC 2047 "words" are not recognized unless + check_rfc2047_length is set false. + +10. There is a new log selector called "pid", which causes the current process + id to be added to every log line, in square brackets, immediately after the + time and date. + +11. Exim has been modified so that it flushes SMTP output before implementing + a delay in an ACL. It also flushes the output before performing a callout, + as this can take a substantial time. These behaviours can be disabled by + obeying control = no_delay_flush or control = no_callout_flush, + respectively, at some earlier stage of the connection. The effect of the + new default behaviour is to disable the PIPELINING optimization in these + situations, in order to avoid unexpected timeouts in clients. + +12. There are two new expansion conditions that iterate over a list. They are + called forany and forall, and they are used like this: + + ${if forany{}{}{}{}} + ${if forall{}{}{}{}} + + The first argument is expanded, and the result is treated as a list. By + default, the list separator is a colon, but it can be changed by the normal + method. The second argument is interpreted as a condition that is to be + applied to each item in the list in turn. During the interpretation of the + condition, the current list item is placed in a variable called $item. + + - For forany, interpretation stops if the condition is true for any item, + and the yes-string is then expanded. If the condition is false for all + items in the list, the no-string is expanded. + + - For forall, interpration stops if the condition is false for any item, + and the no-string is then expanded. If the condition is true for all + items in the list, the yes-string is expanded. + + Note that negation of forany means that the condition must be false for all + items for the overall condition to succeed, and negation of forall means + that the condition must be false for at least one item. + + In this example, the list separator is changed to a comma: + + ${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}} + + Outside a forany/forall condition, the value of $item is an empty string. + Its value is saved and restored while forany/forall is being processed, to + enable these expansion items to be nested. + +13. There's a new global option called dsn_from that can be used to vary the + contents of From: lines in bounces and other automatically generated + messages ("delivery status notifications" - hence the name of the option). + The default setting is: + + dsn_from = Mail Delivery System + + The value is expanded every time it is needed. If the expansion fails, a + panic is logged, and the default setting is used. + +14. The smtp transport has a new option called hosts_avoid_pipelining. It can + be used to suppress the use of PIPELINING to certain hosts, while still + supporting the other SMTP extensions (cf hosts_avoid_tls). + +15. By default, exigrep does case-insensitive matches. There is now a -I option + that makes it case-sensitive. This may give a performance improvement when + searching large log files. Without -I, the Perl pattern matches use the /i + option; with -I they don't. In both cases it is possible to change the case + sensitivity within the pattern using (?i) or (?-i). + + +Version 4.66 +------------ + +No new features were added to 4.66. + + +Version 4.65 +------------ + +No new features were added to 4.65. + + +Version 4.64 +------------ + + 1. ACL variables can now be given arbitrary names, as long as they start with + "acl_c" or "acl_m" (for connection variables and message variables), are at + least six characters long, with the sixth character being either a digit or + an underscore. + + 2. There is a new ACL modifier called log_reject_target. It makes it possible + to specify which logs are used for messages about ACL rejections. + + 3. There is a new authenticator called "dovecot". This is an interface to the + authentication facility of the Dovecot POP/IMAP server, which can support a + number of authentication methods. + + 4. The variable $message_headers_raw provides a concatenation of all the + messages's headers without any decoding. This is in contrast to + $message_headers, which does RFC2047 decoding on the header contents. + + 5. In a DNS black list, if two domain names, comma-separated, are given, the + second is used first to do an initial check, making use of any IP value + restrictions that are set. If there is a match, the first domain is used, + without any IP value restrictions, to get the TXT record. + + 6. All authenticators now have a server_condition option. + + 7. There is a new command-line option called -Mset. It is useful only in + conjunction with -be (that is, when testing string expansions). It must be + followed by a message id; Exim loads the given message from its spool + before doing the expansions. + + 8. Another similar new command-line option is called -bem. It operates like + -be except that it must be followed by the name of a file that contains a + message. + + 9. When an address is delayed because of a 4xx response to a RCPT command, it + is now the combination of sender and recipient that is delayed in + subsequent queue runs until its retry time is reached. + +10. Unary negation and the bitwise logical operators and, or, xor, not, and + shift, have been added to the eval: and eval10: expansion items. + +11. The variables $interface_address and $interface_port have been renamed + as $received_ip_address and $received_port, to make it clear that they + relate to message reception rather than delivery. (The old names remain + available for compatibility.) + +12. The "message" modifier can now be used on "accept" and "discard" acl verbs + to vary the message that is sent when an SMTP command is accepted. + + +Version 4.63 +------------ + +1. There is a new Boolean option called filter_prepend_home for the redirect + router. + +2. There is a new acl, set by acl_not_smtp_start, which is run right at the + start of receiving a non-SMTP message, before any of the message has been + read. + +3. When an SMTP error message is specified in a "message" modifier in an ACL, + or in a :fail: or :defer: message in a redirect router, Exim now checks the + start of the message for an SMTP error code. + +4. There is a new parameter for LDAP lookups called "referrals", which takes + one of the settings "follow" (the default) or "nofollow". + +5. Version 20070721.2 of exipick now included, offering these new options: + --reverse + After all other sorting options have bee processed, reverse order + before displaying messages (-R is synonym). + --random + Randomize order of matching messages before displaying. + --size + Instead of displaying the matching messages, display the sum + of their sizes. + --sort [,...] + Before displaying matching messages, sort the messages according to + each messages value for each variable. + --not + Negate the value for every test (returns inverse output from the + same criteria without --not). + + +Version 4.62 +------------ + +1. The ${readsocket expansion item now supports Internet domain sockets as well + as Unix domain sockets. If the first argument begins "inet:", it must be of + the form "inet:host:port". The port is mandatory; it may be a number or the + name of a TCP port in /etc/services. The host may be a name, or it may be an + IP address. An ip address may optionally be enclosed in square brackets. + This is best for IPv6 addresses. For example: + + ${readsocket{inet:[::1]:1234}{}... + + Only a single host name may be given, but if looking it up yield more than + one IP address, they are each tried in turn until a connection is made. Once + a connection has been made, the behaviour is as for ${readsocket with a Unix + domain socket. + +2. If a redirect router sets up file or pipe deliveries for more than one + incoming address, and the relevant transport has batch_max set greater than + one, a batch delivery now occurs. + +3. The appendfile transport has a new option called maildirfolder_create_regex. + Its value is a regular expression. For a maildir delivery, this is matched + against the maildir directory; if it matches, Exim ensures that a + maildirfolder file is created alongside the new, cur, and tmp directories. + Version 4.61 ------------ -PH/01 There is a new global option called disable_ipv6, which does exactly what - its name implies. If set true, even if the Exim binary has IPv6 support, - no IPv6 activities take place. AAAA records are never looked up for host - names given in manual routing data or elsewhere. AAAA records that are - received from the DNS as additional data for MX records are ignored. Any - IPv6 addresses that are listed in local_interfaces, manualroute route - data, etc. are also ignored. If IP literals are enabled, the ipliteral - router declines to handle IPv6 literal addresses. - -PH/02 There are now 20 of each type of ACL variable by default (instead of 10). - It is also possible to change the numbers by setting ACL_CVARS and/or - ACL_MVARS in Local/Makefile. Backward compatibility is maintained if you - upgrade to this release with existing messages containing ACL variable - settings on the queue. However, going in the other direction - (downgrading) will not be compatible; the values of ACL variables will be - lost. - -PH/03 If quota_warn_message contains a From: header, Exim now refrains from - adding the default one. Similarly, if it contains a Reply-To: header, the - errors_reply_to option, if set, is not used. - -PH/04 The variables $auth1, $auth2, $auth3 are now available in authenticators, - containing the same values as $1, $2, $3. The new variables are provided - because the numerical variables can be reset during string expansions - (for example, during a "match" operation) and so may lose the - authentication data. The preferred variables are now the new ones, with - the use of the numerical ones being deprecated, though the support will - not be removed, at least, not for a long time. - -PH/05 The "control=freeze" ACL modifier can now be followed by /no_tell. If - the global option freeze_tell is set, it is ignored for the current - message (that is, nobody is told about the freezing), provided all the - "control=freeze" modifiers that are obeyed in the current message have - the /no_tell option. - -PH/06 In both GnuTLS and OpenSSL, an expansion of tls_privatekey that results - in an empty string is now treated as unset. - -PH/07 There is a new log selector called sender_verify_fail, which is set by - default. If it is unset, the separate log line that gives details of a - sender verification failure is not written. Log lines for the rejection - of SMTP commands (e.g. RCPT) contain just "sender verify failed", so some - detail is lost. - -PH/08 The default for dns_check_names_pattern now allows slashes within names, - as there are now some PTR records that contain slashes. This check is - only to protect against broken name servers that fall over on strange - characters, so the fact that it applies to all lookups doesn't matter. - -PH/09 The default for rfc4131_query_timeout has been changed from 30s to 5s. - -PH/10 When compiled on FreeBSD, NetBSD, or BSD/OS, the pipe transport has a new - Boolean option called use_classresources, defaulting false. If it is set - true, the setclassresources() function is used to set resource limits - when a pipe transport is run to perform a delivery. The limits for the - uid under which the pipe is to run are obtained from the login class - database. - -PH/11 If retry_interval_max is set greater than 24 hours, it is quietly reset - to 24 hours. This avoids potential overflow problems when processing G - and H retry rules, and it seems reasonable to require a retry at least - once a day. - -PH/12 When the plaintext authenticator is running as a client, the server - challenges are now checked to ensure they are valid base64 strings. The - default action on failure is to abort the authentication. However, if - client_ignore_invalid_base64 is set true, invalid responses are ignored. - -PH/13 When the plaintext authenticator is running as a client, the challenges - from the server are placed in $auth1, $auth2, etc. as they are received. - Thus, the challege that is received in response to sending the first - string (with the AUTH command) can be used in the expansion of the second - string, and so on. Currently, up to 3 challenge strings are available in - this way. If an invalid base64 string is received when client_ignore_ - invalid_base64 is set, an empty string is put in the $auth variable. - -PH/14 Messages created by the autoreply transport now contain a References: - header. This is constructed in accordance with rules that are described - in section 3.64 of RFC 2822, which states that replies should contain - such a header line, and section 3.14 of RFC 3834, which states that - automatic responses are not different in this respect. However, because - some mail processing software does not cope well with very long header - lines, no more than 12 message IDs are copied from the References: header - line in the incoming message. If there are more than 12, the first one - and then the final 11 are copied, before adding the message ID of the - incoming message. - -PH/15 The smtp transport has a new option called authenticated_sender_force. - When set true, it allows the authenticated_sender option's value to be - used, even if Exim has not authenticated as a client. - -PH/16 The expansion ${time_eval:} converts an Exim time string such as - 2d4h1m into a number of seconds. - -PH/17 The ACL modifier control=allow_auth_unadvertised can be used to permit a - client host to use the SMTP AUTH command even when it has not been - advertised in response to EHLO. Furthermore, because there are apparently - some really broken clients that do this, Exim will even accept AUTH after - HELO when this control is set. It should only be used if you really need - it, and you should limit its use to those broken hosts that do not work - without it. For example: - - warn hosts = 192.168.34.25 - control = allow_auth_unadvertised - - This control is permitted only in the connection and HELO ACLs. - -PH/18 There is a new ACL modifier called "add_header" which does what its name - implies. It specifies one of more header lines that are to be added to an - incoming message, assuming, of course, that the message is ultimately - accepted. - - This modifier is permitted in the MAIL, RCPT, PREDATA, DATA, MIME, and - non-SMTP ACLs (in other words, those that are concerned with accepting a - message). Added header lines are accumulated during the MAIL, RCPT, and - PREDATA ACLs, with any duplicates being discarded. They are then added to - the message before processing the DATA and MIME ACLs, during which - further added header lines are accumulated, again with duplicates - discarded. Thus, it is possible to add two identical header lines to an - SMTP message, but only if one is added before DATA and one after. - - In the case of non-SMTP messages, new headers are accumulated during the - non-SMTP ACL, and added to the message at the end. - - The add_header modifier is available for use with all ACL verbs. In the - case of the WARN verb, add_header supersedes the use of "message" for - this purpose; for the other verbs, it provides a new facility. If both - add_header and "message" are present on a WARN verb, both are processed - according to their specifications. - - The add_header modifier acts immediately it is encountered during the - processing of an ACL. This is different to the (now-deprecated) use of - "message" on a WARN verb, where the action is taken only if all the - conditions are true. Notice the difference between these two cases on a - RCPT ACL: - - deny add_header = ADDED: some text - - - deny - add_header = ADDED: some text - - In the first case, the header is always added, whether or not the current - recipient is rejected. In the second case, the header is added only if - the recipient is rejected. - - If add_header appears more than once on an ACL statement, multiple - headers are added, provided that they have different content. (In the - case of WARN with "message", only the last value of "message" is used.) - - The facility for specifying where the new header is to be inserted, as - described for WARN with "message" in section 39.19 of the 4.60 manual, is - supported. - -PH/19 The following errors can now be detected in retry rules: - - mail_4xx This is like rcpt_4xx, but applies to MAIL commands - - data_4xx This is like rcpt_4xx, but applies to DATA commands and the - response code after the end of the data - - lost_connection This error occurs when the server unexpectedly closes - the SMTP connection. There may, of course, legitmate reasons - for this (host died, network died), but if it repeats a lot - for the same host, it indicates something odd. - - tls_required The server was required to use TLS (hosts_require_tls), - but either did not offer it, or responded with 4xx to - STARTTLS, or there was a problem setting up the TLS connection - - Note that a 5xx response to STARTTLS is a permanent error. - -PH/20 There are now two options for the exicyclog script: - - -k specifies the number of old logs to keep, overriding the - default that is set when Exim is built. - - -l specifies the log file path, in the same format as the - log_file_path option (e.g. /var/log/exim_%slog), again, - overriding the script's default - which is to find the setting - from Exim's configuration. +The documentation is up-to-date for the 4.61 release. Major new features since +the 4.60 release are: + +. An option called disable_ipv6, to disable the use of IPv6 completely. + +. An increase in the number of ACL variables to 20 of each type. + +. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1, + $2, $3, (though those are still set) because the numeric variables get used + for other things in complicated expansions. + +. The default for rfc1413_query_timeout has been changed from 30s to 5s. + +. It is possible to use setclassresources() on some BSD OS to control the + resources used in pipe deliveries. + +. A new ACL modifier called add_header, which can be used with any verb. + +. More errors are detectable in retry rules. + +There are a number of other additions too. Version 4.60