X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/3af76a815c0f4ac04c80610364744b3a73846de9..df199fec8faee495664d153096dff38faf3ba3ad:/doc/doc-txt/ChangeLog diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index 8dfb62269..824a8d3eb 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -1,8 +1,189 @@ -$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.189 2005/08/02 08:25:45 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.266 2005/11/21 10:24:02 ph10 Exp $ Change log file for Exim from version 4.21 ------------------------------------------- +Exim version 4.60 +----------------- + +PH/01 Two changes to the default runtime configuration: + + (1) Move the checks for relay_from_hosts and authenticated clients from + after to before the (commented out) DNS black list checks. + + (2) Add control=submission to the relay_from_hosts and authenticated + clients checks, on the grounds that messages accepted by these + statements are most likely to be submissions. + +PH/02 Several tidies to the handling of ${prvs and ${prvscheck: + + (1) Generate an error if the third argument for the ${prvs expansion is + not a single digit. + + (2) Treat a missing third argument of ${prvscheck as if it were an empty + string. + + (3) Reset the variables that are obtained from the first argument of + ${prvscheck and used in the second argument before leaving the code, + because their memory is reclaimed, so using them afterwards may do + silly things. + + (4) Tidy up the code for expanding the arguments of ${prvscheck one by + one (it's much easier than Tom thought :-). + + (5) Because of (4), we can now allow for the use of $prvscheck_result + inside the third argument. + +PH/03 For some reason, the default setting of PATH when running a command from + a pipe transport was just "/usr/bin". I have changed it to + "/bin:/usr/bin". + +PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause + anything to be listed in the output from -bV. + +PH/05 When a filter generated an autoreply, the entire To: header line was + quoted in the delivery log line, like this: + + => >A.N.Other ... + + This has been changed so that it extracts the operative address. There + may be more than one such address. If so, they are comma-separated, like + this: + + => >ano@some.domain,ona@other.domain ... + +PH/06 When a client host used a correct literal IP address in a HELO or EHLO + command, (for example, EHLO [1.2.3.4]) and the client's IP address was + not being looked up in the rDNS to get a host name, Exim was showing the + IP address twice in Received: lines, even though the IP addresses were + identical. For example: + + Received: from [1.2.3.4] (helo=[1.2.3.4]) + + However, if the real host name was known, it was omitting the HELO data + if it matched the actual IP address. This has been tidied up so that it + doesn't show the same IP address twice. + +PH/07 When both +timestamp and +memory debugging was on, the value given by + $tod_xxx expansions could be wrong, because the tod_stamp() function was + called by the debug printing, thereby overwriting the timestamp buffer. + Debugging no longer uses the tod_stamp() function when +timestamp is set. + +PH/08 When the original message was included in an autoreply transport, it + always said "this is a copy of the message, including all the headers", + even if body_only or headers_only was set. It now gives an appropriate + message. + +PH/09 Applied a patch from the Sieve maintainer which: + + o fixes some comments + o adds the (disabled) notify extension core + o adds some debug output for the result of if/elsif tests + o points to the current vacation draft in the documentation + and documents the missing references header update + + and most important: + + o fixes a bug in processing the envelope test (when testing + multiple envelope elements, the last element determinted the + result) + +PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to + Electronic Mail") by including: + + Auto-submitted: auto-generated + + in the messages that it generates (bounce messages and others, such as + warnings). In the case of bounce messages for non-SMTP mesages, there was + also a typo: it was using "Auto_submitted" (underscore instead of + hyphen). Since every message generated by Exim is necessarily in response + to another message, thes have all been changed to: + + Auto-Submitted: auto-replied + + in accordance with these statements in the RFC: + + The auto-replied keyword: + + - SHOULD be used on messages sent in direct response to another + message by an automatic process, + + - MUST NOT be used on manually-generated messages, + + - MAY be used on Delivery Status Notifications (DSNs) and Message + Disposition Notifications (MDNs), + + - MUST NOT be used on messages generated by automatic or periodic + processes, except for messages which are automatic responses to + other messages. + +PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}" + to the default Received: header definition. + +PH/12 Added log selector acl_warn_skipped (default on). + +PH/13 After a successful wildlsearch lookup, discard the values of numeric + variables because (a) they are in the wrong storage pool and (b) even if + they were copied, it wouldn't work properly because of the caching. + +PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length + checking when decoding. Apparently there are clients that generate + overlong encoded strings. Why am I not surprised? + +PH/15 If the first argument of "${if match_address" was not empty, but did not + contain an "@" character, Exim crashed. Now it writes a panic log message + and treats the condition as false. + +PH/16 In autoreply, treat an empty string for "once" the same as unset. + +PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve + extension "envelope-auth". The code is finished and in agreement with + other implementations, but there is no documentation so far and in fact, + nobody wrote the draft yet. This extension is currently #undef'ed, thus + not changing the active code. + + Print executed "if" and "elsif" statements when debugging is used. This + helps a great deal to understand what a filter does. + + Document more things not specified clearly in RFC3028. I had all this + sorted out, when out of a sudden new issues came to my mind. Oops." + +PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists + (Bugzilla #53). + + +Exim version 4.54 +----------------- + +PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was + set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not. + It now does. + +PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on + the CVS lines, and there was a missing #if HAVE_IPV6 in host.c. + +PH/03 Typo: missing ".o" in src/pcre/Makefile. + +PH/04 Tighten up "personal" tests: Instead of testing for any "List-" + header line, restrict the check to what is listed in RFCs 2369 and 2929. + Also, for "Auto-Submitted", treat anything other than "no" as + non-personal, in accordance with RFC 3834. (Previously it treated + anything starting "auto-" as non-personal.) + +TF/01 The control=submission/name=... option had a problem with syntax + errors if the name included a slash character. The /name= option + now slurps the rest of the string, so it can include any characters + but it must come last in the list of options (after /sender_retain + or /domain=). + +PH/05 Some modifications to the interface to the fake nameserver for the new + testing suite. + +PH/06 Add ${if def:sender_address {(envelope-from <$sender_address>)\n\t}} + into the default Received: header string. + + + Exim version 4.53 ----------------- @@ -31,6 +212,199 @@ PH/06 The use of forbid_filter_existstest now also locks out the use of the PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP protocol synchronization error", to keep the pedants happy. +PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as + well as for IRIX systems, when gcc is being used. See the host.c source + file for comments. + +PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer. + +PH/10 Named domain lists were not working if used in a queue_smtp_domains + setting. + +PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp + transport and to the smtp transport in LMTP mode. + +TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway). + +PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to + run a filter in a subprocess. This could lead to confusion in subsequent + lookups in the parent process. There should also be a search_tidyup() at + the end of the subprocess. + +PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true + only if the host matched helo_try_verify_hosts, which caused the + verification to occur when the EHLO/HELO command was issued. The ACL just + tested the remembered result. Now, if a previous verification attempt has + not happened, "verify = helo" does it there and then. + +JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04) + +TK/03 Fix log output including CR from clamd. + +PH/14 A reference to $reply_address when Reply-to: was empty and From: did not + exist provoked a memory error which could cause a segfault. + +PH/15 Installed PCRE 6.2 + +PH/17 Defined BIND_8_COMPAT in the Darwin os.h file. + +PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause + of the problem. Specifically, suggested +O2 rather than +O1 for the + HP-UX compiler. + +PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch). + +PH/20 If a delivery was routed to a non-standard port by means of an SRV + record, the port was not correctly logged when the outgoing_port log + selector was set (it logged the transort's default port). + +PH/21 Added support for host-specific ports to manualroute, queryprogram, + fallback_hosts, and "hosts" in the smtp transport. + +PH/22 If the log selector "outgoing_port" is set, the port is now also given on + host errors such as "Connection refused". + +PH/23 Applied a patch to fix problems with exim-4.52 while doing radius + authentication with radiusclient 0.4.9: + + - Error returned from rc_read_config was caught wrongly + - Username/password not passed on to radius server due to wrong length. + + The presumption is that some radiusclient API changes for 4.51/PH/17 + were not taken care of correctly. The code is still untested by me (my + Linux distribution still has 0.3.2 of radiusclient), but it was + contributed by a Radius user. + +PH/24 When doing a callout, the value of $domain wasn't set correctly when + expanding the "port" option of the smtp transport. + +TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met + while reading a MIME header. Thanks to Tom Hughes for a patch. + +PH/24 Include config.h inside local_scan.h so that configuration settings are + available. + +PH/25 Make $smtp_command_argument available after all SMTP commands. This means + that in an ACL for RCPT (for example), you can examine exactly what was + received. + +PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO + commands, but it was not correctly comparing the address with the actual + client host address. Thus, it would show the EHLO address in Received: + header lines when this was not necessary. + +PH/27 Added the % operator to ${eval:}. + +PH/28 Exim tries to create and chdir to its spool directory when it starts; + it should be ignoring failures (because with -C, for example, it has lost + privilege). It wasn't ignoring creation failures other than "already + exists". + +PH/29 Added "crypteq" to the list of supported features that Exim outputs when + -bV or -d is used. + +PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed + because an input line was too long, either on its own, or by virtue of + too many continuations, the temporary file was not being removed, and the + return code was incorrect. + +PH/31 Missing "BOOL" in function definition in filtertest.c. + +PH/32 Applied Sieve patches from the maintainer. + +TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67. + +PH/33 Added "verify = not_blind". + +PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in + Local/Makefile (with some defaults set). These are used in built scripts + such as exicyclog, but they have never been used in the exim_install + script (though there are many overriding facilities there). I have + arranged that the exim_install script now takes note of these two + settings. + +PH/35 Installed configuration files for Dragonfly. + +PH/36 When a locally submitted message by a trusted user did not contain a + From: header, and the sender address was obtained from -f or from an SMTP + MAIL command, and the trusted user did not use -F to supply a sender + name, $originator_name was incorrectly used when constructing a From: + header. Furthermore, $originator_name was used for submission mode + messages from external hosts without From: headers in a similar way, + which is clearly wrong. + +PH/37 Added control=suppress_local_fixups. + +PH/38 When log_selector = +received_sender was set, and the addition of the + sender made the log line's construction buffer exactly full, or one byte + less than full, an overflow happened when the terminating "\n" was + subsequently added. + +PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry + when the result of a list match is failure because a DNS lookup failed. + +PH/40 RM_COMMAND is now used in the building process. + +PH/41 Added a "distclean" target to the top-level Makefile; it deletes all + the "build-* directories that it finds. + +PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP + address in a domain literal was a prefix of an interface address. + +PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains + when verifying a sender address, unless rewrite_headers is false. + +PH/44 Wrote a long comment about why errors_to addresses are verified as + recipients, not senders. + +TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when + the ratelimit ACL was added. + +PH/45 Added $smtp_command for the full command (cf $smtp_command_argument). + +PH/46 Added extra information about PostgreSQL errors to the error string. + +PH/47 Added an interface to a fake DNS resolver for use by the new test suite, + avoiding the need to install special zones in a real server. This is + backwards compatible; if it can't find the fake resolver, it drops back. + Thus, both old and new test suites can be run. + +TF/02 Added util/ratelimit.pl + +TF/03 Minor fix to the ratelimit code to improve its behaviour in case the + clock is set back in time. + +TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian + Candler . + +TF/05 The fix for PH/43 was not completely correct; widen_domains is always + OK for addresses that are the result of redirections. + +PH/48 A number of further additions for the benefit of the new test suite, + including a fake gethostbyname() that interfaces to the fake DNS resolver + (see PH/47 above). + +TF/06 The fix for widen_domains has also been applied to qualify_single and + search_parents which are the other dnslookup options that can cause + header rewrites. + +PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter + type ("H"). + +PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable. + +TF/07 Exim produced the error message "an SRV record indicated no SMTP + service" if it encountered an MX record with an empty target hostname. + The message is now "an MX or SRV record indicated no SMTP service". + +TF/08 Change PH/13 introduced the possibility that verify=helo may defer, + if the DNS of the sending site is misconfigured. This is quite a + common situation. This change restores the behaviour of treating a + helo verification defer as a failure. + +PH/51 If self=fail was set on a router, the bounce message did not include the + actual error message. + Exim version 4.52 -----------------