X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/33f316f2c5fad1f91b627fce7473da287bb23162..640bcd3d5b6f4b568483ebee1916dcae4c9845ba:/doc/doc-docbook/spec.xfpt?ds=sidebyside diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 769b9e1c9..422edcee4 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -434,6 +434,7 @@ directory are: .row &_filter.txt_& "specification of the filter language" .row &_Exim3.upgrade_& "upgrade notes from release 2 to release 3" .row &_Exim4.upgrade_& "upgrade notes from release 3 to release 4" +.row &_openssl.txt_& "installing a current OpenSSL release" .endtable The main specification and the specification of the filtering language are also @@ -4479,7 +4480,7 @@ will specify a queue to operate on. For example: .code exim -bp -qGquarantine -mailq -qGquarantime +mailq -qGquarantine exim -qGoffpeak -Rf @special.domain.example .endd @@ -7109,7 +7110,7 @@ Retries for the dnsdb lookup can be controlled by a retry modifier. The form if &"retry_VAL"& where VAL is an integer. The default count is set by the main configuration option &%dns_retry%&. -.cindex cacheing "of dns lookup" +.cindex caching "of dns lookup" .cindex TTL "of dns lookup" .cindex DNS TTL Dnsdb lookup results are cached within a single process (and its children). @@ -9104,7 +9105,7 @@ If the ACL returns defer the result is a forced-fail. Otherwise the expansion f .vitem "&*${certextract{*&<&'field'&>&*}{*&<&'certificate'&>&*}&&& {*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&" -.cindex "expansion" "extracting cerificate fields" +.cindex "expansion" "extracting certificate fields" .cindex "&%certextract%&" "certificate fields" .cindex "certificate" "extracting fields" The <&'certificate'&> must be a variable of type certificate. @@ -12209,7 +12210,7 @@ normally the gid of the Exim user. .cindex "uid (user id)" "of originating user" .cindex "sender" "uid" .vindex "&$caller_uid$&" -.vindex "&$originaltor_uid$&" +.vindex "&$originator_uid$&" The value of &$caller_uid$& that was set when the message was received. For messages received via the command line, this is the uid of the sending user. For messages received by SMTP over TCP/IP, this is normally the uid of the Exim @@ -12606,6 +12607,13 @@ validating resolver (e.g. unbound, or bind with suitable configuration). If you have changed &%host_lookup_order%& so that &`bydns`& is not the first mechanism in the list, then this variable will be false. +.new +This requires that your system resolver library support EDNS0 (and that +DNSSEC flags exist in the system headers). If the resolver silently drops +all EDNS0 options, then this will have no effect. OpenBSD's asr resolver +is known to currently ignore EDNS0, documented in CAVEATS of asr_run(3). +.wen + .vitem &$sender_host_name$& .vindex "&$sender_host_name$&" @@ -12827,7 +12835,7 @@ If TLS has not been negotiated, the value will be 0. .vitem &$tls_in_ourcert$& .vindex "&$tls_in_ourcert$&" -.cindex certificate veriables +.cindex certificate variables This variable refers to the certificate presented to the peer of an inbound connection when the message was received. It is only useful as the argument of a @@ -13097,7 +13105,7 @@ initial startup, even if &%perl_at_start%& is set. .oindex "&%perl_taintmode%&" .cindex "Perl" "taintmode" To provide more security executing Perl code via the embedded Perl -interpeter, the &%perl_taintmode%& option can be set. This enables the +interpreter, the &%perl_taintmode%& option can be set. This enables the taint mode of the Perl interpreter. You are encouraged to set this option to a true value. To avoid breaking existing installations, it defaults to false. @@ -14017,6 +14025,7 @@ acknowledgment is sent. See chapter &<>& for further details. .option acl_smtp_dkim main string&!! unset .cindex DKIM "ACL for" This option defines the ACL that is run for each DKIM signature +(by default, or as specified in the dkim_verify_signers option) of a received message. See chapter &<>& for further details. @@ -14404,7 +14413,7 @@ it obviously cannot send an error message of any kind. There is a slight performance penalty for these checks. Versions of Exim preceding 4.88 had these disabled by default; -high-rate intallations confident they will never run out of resources +high-rate installations confident they will never run out of resources may wish to deliberately disable them. .option chunking_advertise_hosts main "host list&!!" * @@ -14663,6 +14672,7 @@ record in the authoritative section is used instead. .option dns_use_edns0 main integer -1 .cindex "DNS" "resolver options" .cindex "DNS" "EDNS0" +.cindex "DNS" "OpenBSD If this option is set to a non-negative number then Exim will initialise the DNS resolver library to either use or not use EDNS0 extensions, overriding the system default. A value of 0 coerces EDNS0 off, a value of 1 coerces EDNS0 @@ -14670,6 +14680,12 @@ on. If the resolver library does not support EDNS0 then this option has no effect. +.new +OpenBSD's asr resolver routines are known to ignore the EDNS0 option; this +means that DNSSEC will not work with Exim on that platform either, unless Exim +is linked against an alternative DNS client library. +.wen + .option drop_cr main boolean false This is an obsolete option that is now a no-op. It used to affect the way Exim @@ -15293,6 +15309,9 @@ connecting on a regular LDAP port. This is the LDAP equivalent of SMTP's of SSL-on-connect. In the event of failure to negotiate TLS, the action taken is controlled by &%ldap_require_cert%&. +.new +This option is ignored for &`ldapi`& connections. +.wen .option ldap_version main integer unset @@ -16709,7 +16728,7 @@ example, instead of &"Administrative prohibition"&, it might give: .option smtputf8_advertise_hosts main "host list&!!" * .cindex "SMTPUTF8" "advertising" When Exim is built with support for internationalised mail names, -the availability therof is advertised in +the availability thereof is advertised in response to EHLO only to those client hosts that match this option. See chapter &<>& for details of Exim's support for internationalisation. @@ -16866,6 +16885,9 @@ generates any deliveries to files or pipes, or any new mail messages, the appropriate &%system_filter_..._transport%& option(s) must be set, to define which transports are to be used. Details of this facility are given in chapter &<>&. +.new +A forced expansion failure results in no filter operation. +.wen .option system_filter_directory_transport main string&!! unset @@ -21002,7 +21024,7 @@ The control does not apply to shadow transports. .cindex "hints database" "transport concurrency control" Exim implements this control by means of a hints database in which a record is -incremented whenever a transport process is beaing created. The record +incremented whenever a transport process is being created. The record is decremented and possibly removed when the process terminates. Obviously there is scope for records to get left lying around if there is a system or program crash. To @@ -23966,12 +23988,12 @@ unauthenticated. See also &%hosts_require_auth%&, and chapter .cindex "RFC 3030" "CHUNKING" This option provides a list of servers to which, provided they announce CHUNKING support, Exim will attempt to use BDAT commands rather than DATA. -BDAT will not be used in conjuction with a transport filter. +BDAT will not be used in conjunction with a transport filter. .option hosts_try_fastopen smtp "host list!!" unset -.option "fast open, TCP" "enabling, in client" -.option "TCP Fast Open" "enabling, in client" -.option "RFC 7413" "TCP Fast Open" +.cindex "fast open, TCP" "enabling, in client" +.cindex "TCP Fast Open" "enabling, in client" +.cindex "RFC 7413" "TCP Fast Open" This option provides a list of servers to which, provided the facility is supported by this system, Exim will attempt to perform a TCP Fast Open. @@ -25860,6 +25882,19 @@ turned into a permanent error if you wish. In the second case, Exim tries to deliver the message unauthenticated. .endlist +.new +Note that the hostlist test for whether to do authentication can be +confused if name-IP lookups change between the time the peer is decided +on and the transport running. For example, with a manualroute +router given a host name, and DNS "round-robin" use by that name: if +the local resolver cache times out between the router and the transport +running, the transport may get an IP for the name for its authentication +check which does not match the connection peer IP. +No authentication will then be done, despite the names being identical. + +For such cases use a separate transport which always authenticates. +.wen + .cindex "AUTH" "on MAIL command" When Exim has authenticated itself to a remote server, it adds the AUTH parameter to the MAIL commands it sends, if it has an authenticated sender for @@ -27531,7 +27566,7 @@ Great care should be taken to deal with matters of case, various injection attacks in the string (&`../`& or SQL), and ensuring that a valid filename can always be referenced; it is important to remember that &$tls_in_sni$& is arbitrary unverified data provided prior to authentication. -Further, the initial cerificate is loaded before SNI is arrived, so +Further, the initial certificate is loaded before SNI is arrived, so an expansion for &%tls_certificate%& must have a default which is used when &$tls_in_sni$& is empty. @@ -28075,6 +28110,11 @@ run. A &"discard"& return from the DATA or the non-SMTP ACL discards all the remaining recipients. The &"discard"& return is not permitted for the &%acl_smtp_predata%& ACL. +.new +If the ACL for VRFY returns &"accept"&, a recipient verify (without callout) +is done on the address and the result determines the SMTP response. +.wen + .cindex "&[local_scan()]& function" "when all recipients discarded" The &[local_scan()]& function is always run, even if there are no remaining @@ -28894,7 +28934,11 @@ message body. Cutthrough delivery is not supported via transport-filters or when DKIM signing of outgoing messages is done, because it sends data to the ultimate destination before the entire message has been received from the source. -It is not supported for messages received with the SMTP PRDR option in use. +It is not supported for messages received with the SMTP PRDR +.new +or CHUNKING +.wen +options in use. Should the ultimate destination system positively accept or reject the mail, a corresponding indication is given to the source system and nothing is queued. @@ -28908,7 +28952,7 @@ This behaviour can be adjusted by appending the option &*defer=*&<&'value'&> to the control; the default value is &"spool"& and the alternate value &"pass"& copies an SMTP defer response from the target back to the initiator and does not queue the message. -Note that this is independent of any receipient verify conditions in the ACL. +Note that this is independent of any recipient verify conditions in the ACL. Delivery in this mode avoids the generation of a bounce mail to a (possibly faked) @@ -29745,6 +29789,15 @@ to avoid doing it more than once per message. .cindex "&%verify%& ACL condition" This is a variation of the previous option, in which a modified address is verified as a sender. + +.new +Note that '/' is legal in local-parts; if the address may have such +(eg. is generated from the received message) +they must be protected from the options parsing by doubling: +.code +verify = sender=${sg{${address:$h_sender:}}{/}{//}} +.endd +.wen .endlist @@ -29804,7 +29857,7 @@ deny dnslists = blackholes.mail-abuse.org warn message = X-Warn: sending host is on dialups list dnslists = dialups.mail-abuse.org .endd -.cindex cacheing "of dns lookup" +.cindex caching "of dns lookup" .cindex DNS TTL DNS list lookups are cached by Exim for the duration of the SMTP session (but limited by the DNS return TTL value), @@ -29917,7 +29970,7 @@ multiple DNS records. The inner dnsdb lookup produces a list of MX hosts and the outer dnsdb lookup finds the IP addresses for these hosts. The result of expanding the condition might be something like this: .code -dnslists = sbl.spahmaus.org/<|192.168.2.3|192.168.5.6|... +dnslists = sbl.spamhaus.org/<|192.168.2.3|192.168.5.6|... .endd Thus, this example checks whether or not the IP addresses of the sender domain's mail servers are on the Spamhaus black list. @@ -36041,7 +36094,7 @@ off the &%outgoing_interface%& option. .next .cindex "log" "outgoing remote port" .cindex "port" "logging outgoint remote" -.cindex "TCP/IP" "logging ougtoing remote port" +.cindex "TCP/IP" "logging outgoing remote port" &%outgoing_port%&: The remote port number is added to delivery log lines (those containing => tags) following the IP address. The local port is also added if &%incoming_interface%& and @@ -37870,9 +37923,8 @@ lock will be lost at the instant of rename. .next .vindex "&$body_linecount$&" If you change the number of lines in the file, the value of -&$body_linecount$&, which is stored in the -H file, will be incorrect. At -present, this value is not used by Exim, but there is no guarantee that this -will always be the case. +&$body_linecount$&, which is stored in the -H file, will be incorrect and can +cause incomplete transmission of messages or undeliverable messages. .next If the message is in MIME format, you must take care not to break it. .next @@ -38485,9 +38537,9 @@ To include this support, include &"SUPPORT_PROXY=yes"& in Local/Makefile. It was built on specifications from: -http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt +(&url(http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt)). That URL was revised in May 2014 to version 2 spec: -http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e +(&url(http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e)). The purpose of this facility is so that an application load balancer, such as HAProxy, can sit in front of several Exim servers @@ -38793,7 +38845,7 @@ can be used to affect that action (more on this below). An additional variable, &$event_data$&, is filled with information varying with the event type: .display -&`msg:delivery `& smtp confirmation mssage +&`msg:delivery `& smtp confirmation message &`msg:rcpt:host:defer `& error string &`msg:rcpt:defer `& error string &`msg:host:defer `& error string