X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/32d668a555bb486a27f1899ef8156321ef27816a..0a682b6cd5f70e94b84fa17022554b48c97a63bd:/doc/doc-txt/NewStuff?ds=inline diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 7ac53952d..05c416ec7 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,566 +1,1267 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.52 2005/06/22 10:17:22 ph10 Exp $ - New Features in Exim -------------------- -This file contains descriptions of new features that have been added to Exim, -but have not yet made it into the main manual (which is most conveniently -updated when there is a relatively large batch of changes). The doc/ChangeLog -file contains a listing of all changes, including bug fixes. - - -Exim version 4.52 ------------------ - -TF/01 Support for checking Client SMTP Authorization has been added. CSA is a - system which allows a site to advertise which machines are and are not - permitted to send email. This is done by placing special SRV records in - the DNS, which are looked up using the client's HELO domain. At this - time CSA is still an Internet-Draft. - - Client SMTP Authorization checks are performed by the ACL condition - verify=csa. This will fail if the client is not authorized. If there is - a DNS problem, or if no valid CSA SRV record is found, or if the client - is authorized, the condition succeeds. These three cases can be - distinguished using the expansion variable $csa_status, which can take - one of the values "fail", "defer", "unknown", or "ok". The condition - does not itself defer because that would be likely to cause problems - for legitimate email. - - The error messages produced by the CSA code include slightly more - detail. If $csa_status is "defer" this may be because of problems - looking up the CSA SRV record, or problems looking up the CSA target - address record. There are four reasons for $csa_status being "fail": - the client's host name is explicitly not authorized; the client's IP - address does not match any of the CSA target IP addresses; the client's - host name is authorized but it has no valid target IP addresses (e.g. - the target's addresses are IPv6 and the client is using IPv4); or the - client's host name has no CSA SRV record but a parent domain has - asserted that all subdomains must be explicitly authorized. - - The verify=csa condition can take an argument which is the domain to - use for the DNS query. The default is verify=csa/$sender_helo_name. - - This implementation includes an extension to CSA. If the query domain - is an address literal such as [192.0.2.95], or if it is a bare IP - address, Exim will search for CSA SRV records in the reverse DNS as if - the HELO domain was e.g. 95.2.0.192.in-addr.arpa. Therefore it is - meaningful to say, for example, verify=csa/$sender_host_address - in - fact, this is the check that Exim performs if the client does not say - HELO. This extension can be turned off by setting the main - configuration option dns_csa_use_reverse = false. - - If a CSA SRV record is not found for the domain itself, then a search - is performed through its parent domains for a record which might be - making assertions about subdomains. The maximum depth of this search is - limited using the main configuration option dns_csa_search_limit, which - takes the value 5 by default. Exim does not look for CSA SRV records in - a top level domain, so the default settings handle HELO domains as long - as seven (hostname.five.four.three.two.one.com) which encompasses the - vast majority of legitimate HELO domains. - - The dnsdb lookup also has support for CSA. Although dnsdb already - supports SRV lookups, this is not sufficient because of the extra - parent domain search behaviour of CSA, and (as with PTR lookups) - dnsdb also turns IP addresses into lookups in the reverse DNS space. - The result of ${lookup dnsdb {csa=$sender_helo_name} } has two - space-separated fields: an authorization code and a target host name. - The authorization code can be "Y" for yes, "N" for no, "X" for explicit - authorization required but absent, or "?" for unknown. - -PH/01 The amount of output produced by the "make" process has been reduced, - because the compile lines are often rather long, making it all pretty - unreadable. The new style is along the lines of the 2.6 Linux kernel: - just a short line for each module that is being compiled or linked. - However, it is still possible to get the full output, by calling "make" - like this: - - FULLECHO='' make -e - - The value of FULLECHO defaults to "@", the flag character that suppresses - command reflection in "make". When you ask for the full output, it is - given in addition to the the short output. - -TF/02 There have been two changes concerned with submission mode: - - Until now submission mode always left the return path alone, whereas - locally-submitted messages from untrusted users have the return path - fixed to the user's email address. Submission mode now fixes the return - path to the same address as is used to create the Sender: header. If - /sender_retain is specified then both the Sender: header and the return - path are left alone. - - Note that the changes caused by submission mode take effect after the - predata ACL. This means that any sender checks performed before the - fix-ups will use the untrusted sender address specified by the user, not - the trusted sender address specified by submission mode. Although this - might be slightly unexpected, it does mean that you can configure ACL - checks to spot that a user is trying to spoof another's address, for - example. - - There is also a new /name= option for submission mode which allows you - to specify the user's full name to be included in the Sender: header. - For example: - - accept authenticated = * - control = submission/name=${lookup {$authenticated_id} \ - lsearch {/etc/exim/namelist} } - - The namelist file contains entries like - - fanf: Tony Finch - - And the resulting Sender: header looks like - - Sender: Tony Finch - -TF/03 The control = fakereject ACL modifier now has a fakedefer counterpart, - which works in exactly the same way except it causes a fake SMTP 450 - response after the message data instead of a fake SMTP 550 response. - You must take care when using fakedefer because it will cause messages - to be duplicated when the sender retries. Therefore you should not use - fakedefer if the message will be delivered normally. - -TF/04 There is a new ratelimit ACL condition which can be used to measure - and control the rate at which clients can send email. This is more - powerful than the existing smtp_ratelimit_* options, because those - options only control the rate of commands in a single SMTP session, - whereas the new ratelimit condition works across all connections - (concurrent and sequential) to the same host. - - The syntax of the ratelimit condition is: - - ratelimit = /

/ / - - If the average client sending rate is less than m messages per time - period p then the condition is false, otherwise it is true. - - The parameter p is the smoothing time constant, in the form of an Exim - time interval e.g. 8h for eight hours. A larger time constant means it - takes Exim longer to forget a client's past behaviour. The parameter m is - the maximum number of messages that a client can send in a fast burst. By - increasing both m and p but keeping m/p constant, you can allow a client - to send more messages in a burst without changing its overall sending - rate limit. Conversely, if m and p are both small then messages must be - sent at an even rate. - - The key is used to look up the data used to calcluate the client's - average sending rate. This data is stored in a database maintained by - Exim in its spool directory alongside the retry database etc. For - example, you can limit the sending rate of each authenticated user, - independent of the computer they are sending from, by setting the key - to $authenticated_id. The default key is $sender_host_address. - - Each ratelimit condition can have up to two options. The first option - specifies what Exim measures the rate of, and the second specifies how - Exim handles excessively fast clients. - - The per_mail option means that it measures the client's rate of sending - messages. This is the default if none of the per_* options is specified. - - The per_conn option means that it measures the client's connection rate. - - The per_byte option limits the sender's email bandwidth. Note that it - is best to use this option in the DATA ACL; if it is used in an earlier - ACL it relies on the SIZE parameter on the MAIL command, which may be - inaccurate or completely missing. You can follow the limit m in the - configuration with K, M, or G to specify limits in kilobytes, - megabytes, or gigabytes respectively. - - The per_cmd option means that Exim recomputes the rate every time the - condition is processed, which can be used to limit the SMTP command rate. - The alias per_rcpt is provided for use in the RCPT ACL instead of per_cmd - to make it clear that the effect is to limit the rate at which recipients - are accepted. Note that in this case the rate limiting engine will see a - message with many recipients as a large high-speed burst. - - If a client's average rate is greater than the maximum, the rate - limiting engine can react in two possible ways, depending on the - presence of the strict or leaky options. This is independent of the - other counter-measures (e.g. rejecting the message) that may be - specified by the rest of the ACL. The default mode is leaky, which - avoids a sender's over-aggressive retry rate preventing it from getting - any email through. - - The strict option means that the client's recorded rate is always - updated. The effect of this is that Exim measures the client's average - rate of attempts to send email, which can be much higher than the - maximum. If the client is over the limit it will be subjected to - counter-measures until it slows down below the maximum rate. - - The leaky option means that the client's recorded rate is not updated - if it is above the limit. The effect of this is that Exim measures the - client's average rate of successfully sent email, which cannot be - greater than the maximum. If the client is over the limit it will - suffer some counter-measures, but it will still be able to send email - at the configured maximum rate, whatever the rate of its attempts. - - As a side-effect, the ratelimit condition will set the expansion - variables $sender_rate containing the client's computed rate, - $sender_rate_limit containing the configured value of m, and - $sender_rate_period containing the configured value of p. - - Exim's other ACL facilities are used to define what counter-measures - are taken when the rate limit is exceeded. This might be anything from - logging a warning (e.g. while measuring existing sending rates in order - to define our policy), through time delays to slow down fast senders, - up to rejecting the message. For example, - - # Log all senders' rates - warn - ratelimit = 0 / 1h / strict - log_message = \ - Sender rate $sender_rate > $sender_rate_limit / $sender_rate_period - - # Slow down fast senders - warn - ratelimit = 100 / 1h / per_rcpt / strict - delay = ${eval: 10 * ($sender_rate - $sender_rate_limit) } - - # Keep authenticated users under control - deny - ratelimit = 100 / 1d / strict / $authenticated_id - - # System-wide rate limit - defer - message = Sorry, too busy. Try again later. - ratelimit = 10 / 1s / $primary_hostname - - # Restrict incoming rate from each host, with a default rate limit - # set using a macro and special cases looked up in a table. - defer - message = Sender rate $sender_rate exceeds \ - $sender_rate_limit messages per $sender_rate_period - ratelimit = ${lookup {$sender_host_address} \ - cdb {DB/ratelimits.cdb} \ - {$value} {RATELIMIT} } - -TK/01 Added an 'spf' lookup type that will return an SPF result for a given - email address (the key) and an IP address (the database): - - ${lookup {tom@duncanthrax.net} spf{217.115.139.137}} - - The lookup will return the same result strings as they can appear in - $spf_result (pass,fail,softfail,neutral,none,err_perm,err_temp). The - lookup is armored in EXPERIMENTAL_SPF. Currently, only IPv4 addresses - are supported. - - Patch submitted by Chris Webb . - -PH/02 There's a new verify callout option, "fullpostmaster", which first acts - as "postmaster" and checks the recipient . If that - fails, it tries just , without a domain, in accordance with - the specification in RFC 2821. - -PH/03 The action of the auto_thaw option has been changed. It no longer applies - to frozen bounce messages. - -TK/02 There are two new expansion items to help with the implementation of - the BATV "prvs" scheme in an Exim configuration: - - - ${prvs {

}{}{[KEYNUM]}} - - The "prvs" expansion item takes three arguments: A qualified RFC2821 - email address, a key and an (optional) key number. All arguments are - expanded before being used, so it is easily possible to lookup a key - and key number using the address as the lookup key. The key number is - optional and defaults to "0". The item will expand to a "prvs"-signed - email address, to be typically used with the "return_path" option on - a smtp transport. The decision if BATV should be used with a given - sender/recipient pair should be done on router level, to avoid having - to set "max_rcpt = 1" on the transport. - - - ${prvscheck {
}{}{}} - - The "prvscheck" expansion item takes three arguments. Argument 1 is - expanded first. When the expansion does not yield a SYNTACTICALLY - valid "prvs"-scheme address, the whole "prvscheck" item expands to - the empty string. If
is a "prvs"-encoded address after - expansion, two expansion variables are set up: +This file contains descriptions of new features that have been added to Exim. +Before a formal release, there may be quite a lot of detail so that people can +test from the snapshots or the Git before the documentation is updated. Once +the documentation is updated, this file is reduced to a short list. + +Version 4.92 +-------------- + + 1. ${l_header:} and ${l_h:} expansion items, giving a colon-sep + list when there are multiple headers having a given name. This matters + when individual headers are wrapped onto multiple lines; with previous + facilities hard to parse. + + 2. The ${readsocket } expansion item now takes a "tls" option, doing the + obvious thing. + + 3. EXPERIMENTAL_REQUIRETLS. See the experimental.spec file. + + 4. If built with SUPPORT_I18N a "utf8_downconvert" option on the smtp transport. + +Version 4.91 +-------------- + + 1. Dual-certificate stacks on servers now support OCSP stapling, under GnuTLS + version 3.5.6 or later. + + 2. DANE is now supported under GnuTLS version 3.0.0 or later. Both GnuTLS and + OpenSSL versions are moved to mainline support from Experimental. + New SMTP transport option "dane_require_tls_ciphers". + + 3. Feature macros for the compiled-in set of malware scanner interfaces. + + 4. SPF support is promoted from Experimental to mainline status. The template + src/EDITME makefile does not enable its inclusion. + + 5. Logging control for DKIM verification. The existing DKIM log line is + controlled by a "dkim_verbose" selector which is _not_ enabled by default. + A new tag "DKIM=" is added to <= lines by default, controlled by + a "dkim" log_selector. + + 6. Receive duration on <= lines, under a new log_selector "receive_time". + + 7. Options "ipv4_only" and "ipv4_prefer" on the dnslookup router and on + routing rules in the manualroute router. + + 8. Expansion item ${sha3:} / ${sha3_:} now also supported + under OpenSSL version 1.1.1 or later. + + 9. DKIM operations can now use the Ed25519 algorithm in addition to RSA, under + GnuTLS 3.6.0 or OpenSSL 1.1.1 or later. + +10. Builtin feature-macros _CRYPTO_HASH_SHA3 and _CRYPTO_SIGN_ED25519, library + version dependent. + +11. "exim -bP macro " returns caller-usable status. + +12. Expansion item ${authresults {}} for creating an + Authentication-Results: header. + +13. EXPERIMENTAL_ARC. See the experimental.spec file. + See also new util/renew-opendmarc-tlds.sh script for use with DMARC/ARC. + +14: A dane:fail event, intended to facilitate reporting. + +15. "Lightweight" support for Redis Cluster. Requires redis_servers list to + contain all the servers in the cluster, all of which must be reachable from + the running exim instance. If the cluster has master/slave replication, the + list must contain all the master and slave servers. + +16. Add an option to the Avast scanner interface: "pass_unscanned". This + allows to treat unscanned files as clean. Files may be unscanned for + several reasons: decompression bombs, broken archives. + + +Version 4.90 +------------ + + 1. PKG_CONFIG_PATH can now be set in Local/Makefile; + wildcards will be expanded, values are collapsed. + + 2. The ${readsocket } expansion now takes an option to not shutdown the + connection after sending the query string. The default remains to do so. + + 3. An smtp transport option "hosts_noproxy_tls" to control whether multiple + deliveries on a single TCP connection can maintain a TLS connection + open. By default disabled for all hosts, doing so saves the cost of + making new TLS sessions, at the cost of having to proxy the data via + another process. Logging is also affected. + + 4. A malware connection type for the FPSCAND protocol. + + 5. An option for recipient verify callouts to hold the connection open for + further recipients and for delivery. + + 6. The reproducible build $SOURCE_DATE_EPOCH environment variable is now + supported. + + 7. Optionally, an alternate format for spool data-files which matches the + wire format - meaning more efficient reception and transmission (at the + cost of difficulty with standard Unix tools). Only used for messages + received using the ESMTP CHUNKING option, and when a new main-section + option "spool_wireformat" (false by default) is set. + + 8. New main configuration option "commandline_checks_require_admin" to + restrict who can use various introspection options. + + 9. New option modifier "no_check" for quota and quota_filecount + appendfile transport. - $prvscheck_address Contains the "prvs"-decoded version of - the address from argument 1. +10. Variable $smtp_command_history returning a comma-sep list of recent + SMTP commands. - $prvscheck_keynum Contains the key number extracted from - the "prvs"-address in argument 1. +11. Millisecond timetamps in logs, on log_selector "millisec". Also affects + log elements QT, DT and D, and timstamps in debug output. - These two variables can be used in the expansion code of argument 2 - to retrieve the . The VALIDITY of the "prvs"-signed address - is then checked. The result is stored in yet another expansion - variable: +12. TCP Fast Open logging. As a server, logs when the SMTP banner was sent + while still in SYN_RECV state; as a client logs when the connection + is opened with a TFO cookie. - $prvscheck_result Contains the result of a "prvscheck" - expansion: Unset (the empty string) for - failure, "1" for success. +13. DKIM support for multiple signing, by domain and/or key-selector. + DKIM support for multiple hashes, and for alternate-identity tags. + Builtin macro with default list of signed headers. + Better syntax for specifying oversigning. + The DKIM ACL can override verification status, and status is visible in + the data ACL. - The "prvscheck" expansion expands to the empty string if
- is not a SYNTACTICALLY valid "prvs"-scheme address. Otherwise, - argument 3 defines what "prvscheck" expands to: If argument 3 - is the empty string, "prvscheck" expands to the decoded version - of the address (no matter if it is CRYPTOGRAPHICALLY valid or not). - If argument 3 expands to a non-empty string, "prvscheck" expands - to that string. +14. Exipick understands -C|--config for an alternative Exim + configuration file. +15. TCP Fast Open used, with data-on-SYN, for client SMTP via SOCKS5 proxy, + for ${readsocket } expansions, and for ClamAV. - Usage example - ------------- +16. The "-be" expansion test mode now supports macros. Macros are expanded + in test lines, and new macros can be defined. - Macro: +17. Support for server-side dual-certificate-stacks (eg. RSA + ECDSA). - PRVSCHECK_SQL = ${lookup mysql{SELECT secret FROM batv_prvs WHERE \ - sender='${quote_mysql:$prvscheck_address}'}{$value}} - RCPT ACL: +Version 4.89 +------------ + + 1. Allow relative config file names for ".include" + + 2. A main-section config option "debug_store" to control the checks on + variable locations during store-reset. Normally false but can be enabled + when a memory corrution issue is suspected on a production system. + + +Version 4.88 +------------ + + 1. The new perl_taintmode option allows to run the embedded perl + interpreter in taint mode. + + 2. New log_selector: dnssec, adds a "DS" tag to acceptance and delivery lines. + + 3. Speculative debugging, via a "kill" option to the "control=debug" ACL + modifier. - # Bounces: drop unsigned addresses for BATV senders - deny message = This address does not send an unsigned reverse path. - senders = : - recipients = +batv_recipients + 4. New expansion item ${sha3:} / ${sha3_:}. + N can be 224, 256 (default), 384, 512. + With GnuTLS 3.5.0 or later, only. - # Bounces: In case of prvs-signed address, check signature. - deny message = Invalid reverse path signature. - senders = : - condition = ${prvscheck {$local_part@$domain}{PRVSCHECK_SQL}{1}} - !condition = $prvscheck_result + 5. Facility for named queues: A command-line argument can specify + the queue name for a queue operation, and an ACL modifier can set + the queue to be used for a message. A $queue_name variable gives + visibility. - Top-Level Router: + 6. New expansion operators base32/base32d. - batv_redirect: - driver = redirect - data = ${prvscheck {$local_part@$domain}{PRVSCHECK_SQL}{}} + 7. The CHUNKING ESMTP extension from RFC 3030. May give some slight + performance increase and network load decrease. Main config option + chunking_advertise_hosts, and smtp transport option hosts_try_chunking + for control. - Transport (referenced by router that makes decision if - BATV is applicable): + 8. LMDB lookup support, as Experimental. Patch supplied by Andrew Colin Kissa. - external_smtp_batv: - driver = smtp - return_path = ${prvs {$return_path} \ - {${lookup mysql{SELECT \ - secret FROM batv_prvs WHERE \ - sender='${quote_mysql:$sender_address}'} \ - {$value}fail}}} + 9. Expansion operator escape8bit, like escape but not touching newline etc.. -PH/04 There are two new options that control the retrying done by the daemon - at startup when it cannot immediately bind a socket (typically because - the socket is already in use). The default values reproduce what were - built-in constants previously: daemon_startup_retries defines the number - of retries after the first failure (default 9); daemon_startup_sleep - defines the length of time to wait between retries (default 30s). +10. Feature macros, generated from compile options. All start with "_HAVE_" + and go on with some roughly recognisable name. Driver macros, for + router, transport and authentication drivers; names starting with "_DRIVER_". + Option macros, for each configuration-file option; all start with "_OPT_". + Use the "-bP macros" command-line option to see what is present. -PH/05 There is now a new ${if condition called "match_ip". It is similar to - match_domain, etc. It must be followed by two argument strings. The first - (after expansion) must be an IP address or an empty string. The second - (after expansion) is a restricted host list that can match only an IP - address, not a host name. For example: +11. Integer values for options can take a "G" multiplier. - ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}} +12. defer=pass option for the ACL control cutthrough_delivery, to reflect 4xx + returns from the target back to the initiator, rather than spooling the + message. - The specific types of host list item that are permitted in the list are - shown below. Consult the manual section on host lists for further - details. +13. New built-in constants available for tls_dhparam and default changed. - . An IP address, optionally with a CIDR mask. +14. If built with EXPERIMENTAL_QUEUEFILE, a queuefile transport, for writing + out copies of the message spool files for use by 3rd-party scanners. - . A single asterisk matches any IP address. +15. A new option on the smtp transport, hosts_try_fastopen. If the system + supports it (on Linux it must be enabled in the kernel by the sysadmin) + try to use RFC 7413 "TCP Fast Open". No data is sent on the SYN segment + but it permits a peer that also supports the facility to send its SMTP + banner immediately after the SYN,ACK segment rather then waiting for + another ACK - so saving up to one roundtrip time. Because it requires + previous communication with the peer (we save a cookie from it) this + will only become active on frequently-contacted destinations. - . An empty item matches only if the IP address is empty. This could be - useful for testing for a locally submitted message or one from specific - hosts in a single test such as +16. A new syslog_pid option to suppress PID duplication in syslog lines. - ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}} - where the first item in the list is the empty string. +Version 4.87 +------------ + + 1. The ACL conditions regex and mime_regex now capture substrings + into numeric variables $regex1 to 9, like the "match" expansion condition. + + 2. New $callout_address variable records the address used for a spam=, + malware= or verify= callout. + + 3. Transports now take a "max_parallel" option, to limit concurrency. + + 4. Expansion operators ${ipv6norm:} and ${ipv6denorm:}. + The latter expands to a 8-element colon-sep set of hex digits including + leading zeroes. A trailing ipv4-style dotted-decimal set is converted + to hex. Pure ipv4 addresses are converted to IPv4-mapped IPv6. + The former operator strips leading zeroes and collapses the longest + set of 0-groups to a double-colon. - . The item @[] matches any of the local host's interface addresses. + 5. New "-bP config" support, to dump the effective configuration. - . Lookups are assumed to be "net-" style lookups, even if "net-" is not - specified. Thus, the following are equivalent: + 6. New $dkim_key_length variable. - ${if match_ip{$sender_host_address}{lsearch;/some/file}... - ${if match_ip{$sender_host_address}{net-lsearch;/some/file}... + 7. New base64d and base64 expansion items (the existing str2b64 being a + synonym of the latter). Add support in base64 for certificates. - You do need to specify the "net-" prefix if you want to specify a - specific address mask, for example, by using "net24-". + 8. New main configuration option "bounce_return_linesize_limit" to + avoid oversize bodies in bounces. The default value matches RFC + limits. + 9. New $initial_cwd expansion variable. -Version 4.51 + +Version 4.86 ------------ -PH/01 The format in which GnuTLS parameters are written to the gnutls-param - file in the spool directory has been changed. This change has been made - to alleviate problems that some people had with the generation of the - parameters by Exim when /dev/random was exhausted. In this situation, - Exim would hang until /dev/random acquired some more entropy. + 1. Support for using the system standard CA bundle. + + 2. New expansion items $config_file, $config_dir, containing the file + and directory name of the main configuration file. Also $exim_version. + + 3. New "malware=" support for Avast. + + 4. New "spam=" variant option for Rspamd. - The new code exports and imports the DH and RSA parameters in PEM - format. This means that the parameters can be generated externally using - the certtool command that is part of GnuTLS. + 5. Assorted options on malware= and spam= scanners. - To replace the parameters with new ones, instead of deleting the file - and letting Exim re-create it, you can generate new parameters using - certtool and, when this has been done, replace Exim's cache file by - renaming. The relevant commands are something like this: + 6. A command-line option to write a comment into the logfile. - # rm -f new.params - # touch new.params - # chown exim:exim new.params - # chmod 0400 new.params - # certtool --generate-privkey --bits 512 >new.params - # echo "" >>new.params - # certtool --generate-dh-params --bits 1024 >> new.params - # mv new.params params + 7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can + be configured to make connections via socks5 proxies. - If Exim never has to generate the parameters itself, the possibility of - stalling is removed. + 8. If built with EXPERIMENTAL_INTERNATIONAL, support is included for + the transmission of UTF-8 envelope addresses. -PH/02 A new expansion item for dynamically loading and calling a locally- - written C function is now provided, if Exim is compiled with + 9. If built with EXPERIMENTAL_INTERNATIONAL, an expansion item for a commonly + used encoding of Maildir folder names. - EXPAND_DLFUNC=yes +10. A logging option for slow DNS lookups. - set in Local/Makefile. The facility is not included by default (a - suitable error is given if you try to use it when it is not there.) +11. New ${env {}} expansion. - If you enable EXPAND_DLFUNC, you should also be aware of the new redirect - router option forbid_filter_dlfunc. If you have unprivileged users on - your system who are permitted to create filter files, you might want to - set forbid_filter_dlfunc=true in the appropriate router, to stop them - using ${dlfunc to run code within Exim. +12. A non-SMTP authenticator using information from TLS client certificates. - You load and call an external function like this: - - ${dlfunc{/some/file}{function}{arg1}{arg2}...} - - Once loaded, Exim remembers the dynamically loaded object so that it - doesn't reload the same object file in the same Exim process (but of - course Exim does start new processes frequently). - - There may be from zero to eight arguments to the function. When compiling - a local function that is to be called in this way, local_scan.h should be - included. The Exim variables and functions that are defined by that API - are also available for dynamically loaded functions. The function itself - must have the following type: - - int dlfunction(uschar **yield, int argc, uschar *argv[]) - - Where "uschar" is a typedef for "unsigned char" in local_scan.h. The - function should return one of the following values: - - OK Success. The string that is placed in "yield" is put into - the expanded string that is being built. - - FAIL A non-forced expansion failure occurs, with the error - message taken from "yield", if it is set. - - FAIL_FORCED A forced expansion failure occurs, with the error message - taken from "yield" if it is set. - - ERROR Same as FAIL, except that a panic log entry is written. - - When compiling a function that is to be used in this way with gcc, - you need to add -shared to the gcc command. Also, in the Exim build-time - configuration, you must add -export-dynamic to EXTRALIBS. - -TF/01 $received_time is a new expansion variable containing the time and date - as a number of seconds since the start of the Unix epoch when the - current message was received. - -PH/03 There is a new value for RADIUS_LIB_TYPE that can be set in - Local/Makefile. It is RADIUSCLIENTNEW, and it requests that the new API, - in use from radiusclient 0.4.0 onwards, be used. It does not appear to be - possible to detect the different versions automatically. - -PH/04 There is a new option called acl_not_smtp_mime that allows you to scan - MIME parts in non-SMTP messages. It operates in exactly the same way as - acl_smtp_mime - -PH/05 It is now possible to redefine a macro within the configuration file. - The macro must have been previously defined within the configuration (or - an included file). A definition on the command line using the -D option - causes all definitions and redefinitions within the file to be ignored. - In other words, -D overrides any values that are set in the file. - Redefinition is specified by using '==' instead of '='. For example: - - MAC1 = initial value - ... - MAC1 == updated value - - Redefinition does not alter the order in which the macros are applied to - the subsequent lines of the configuration file. It is still the same - order in which the macros were originally defined. All that changes is - the macro's value. Redefinition makes it possible to accumulate values. - For example: - - MAC1 = initial value - ... - MAC1 == MAC1 and something added - - This can be helpful in situations where the configuration file is built - from a number of other files. - -PH/06 Macros may now be defined or redefined between router, transport, - authenticator, or ACL definitions, as well as in the main part of the - configuration. They may not, however, be changed within an individual - driver or ACL, or in the local_scan, retry, or rewrite sections of the - configuration. - -PH/07 $acl_verify_message is now set immediately after the failure of a - verification in an ACL, and so is available in subsequent modifiers. In - particular, the message can be preserved by coding like this: +13. Main option "tls_eccurve" for selecting an Elliptic Curve for TLS. + Patch originally by Wolfgang Breyha. - warn !verify = sender - set acl_m0 = $acl_verify_message +14. Main option "dns_trust_aa" for trusting your local nameserver at the + same level as DNSSEC. - Previously, $acl_verify_message was set only while expanding "message" - and "log_message" when a very denied access. - -PH/08 The redirect router has two new options, sieve_useraddress and - sieve_subaddress. These are passed to a Sieve filter to specify the :user - and :subaddress parts of an address. Both options are unset by default. - However, when a Sieve filter is run, if sieve_useraddress is unset, the - entire original local part (including any prefix or suffix) is used for - :user. An unset subaddress is treated as an empty subaddress. - -PH/09 Quota values can be followed by G as well as K and M. - -PH/10 $message_linecount is a new variable that contains the total number of - lines in the header and body of the message. Compare $body_linecount, - which is the count for the body only. During the DATA and - content-scanning ACLs, $message_linecount contains the number of lines - received. Before delivery happens (that is, before filters, routers, and - transports run) the count is increased to include the Received: header - line that Exim standardly adds, and also any other header lines that are - added by ACLs. The blank line that separates the message header from the - body is not counted. Here is an example of the use of this variable in a - DATA ACL: - - deny message = Too many lines in message header - condition = \ - ${if <{250}{${eval: $message_linecount - $body_linecount}}} - - In the MAIL and RCPT ACLs, the value is zero because at that stage the - message has not yet been received. - -PH/11 In a ${run expansion, the variable $value (which contains the standard - output) is now also usable in the "else" string. - -PH/12 In a pipe transport, although a timeout while waiting for the pipe - process to complete was treated as a delivery failure, a timeout while - writing the message to the pipe was logged, but erroneously treated as a - successful delivery. Such timeouts include transport filter timeouts. For - consistency with the overall process timeout, these timeouts are now - treated as errors, giving rise to delivery failures by default. However, - there is now a new Boolean option for the pipe transport called - timeout_defer, which, if set TRUE, converts the failures into defers for - both kinds of timeout. A transport filter timeout is now identified in - the log output. - - -Version 4.50 + +Version 4.85 ------------ -The documentation is up-to-date for the 4.50 release. + 1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the + DANE SMTP draft to assess a secure chain of trust of the certificate + used to establish the TLS connection based on a TLSA record in the + domain of the sender. + + 2. The EXPERIMENTAL_TPDA feature has been renamed to EXPERIMENTAL_EVENT + and several new events have been created. The reason is because it has + been expanded beyond just firing events during the transport phase. Any + existing TPDA transport options will have to be rewritten to use a new + $event_name expansion variable in a condition. Refer to the + experimental-spec.txt for details and examples. + + 3. The EXPERIMENTAL_CERTNAMES features is an enhancement to verify that + server certs used for TLS match the result of the MX lookup. It does + not use the same mechanism as DANE. + + +Version 4.84 +------------ + + +Version 4.83 +------------ + + 1. If built with the EXPERIMENTAL_PROXY feature enabled, Exim can be + configured to expect an initial header from a proxy that will make the + actual external source IP:host be used in exim instead of the IP of the + proxy that is connecting to it. + + 2. New verify option header_names_ascii, which will check to make sure + there are no non-ASCII characters in header names. Exim itself handles + those non-ASCII characters, but downstream apps may not, so Exim can + detect and reject if those characters are present. + + 3. New expansion operator ${utf8clean:string} to replace malformed UTF8 + codepoints with valid ones. + + 4. New malware type "sock". Talks over a Unix or TCP socket, sending one + command line and matching a regex against the return data for trigger + and a second regex to extract malware_name. The mail spoolfile name can + be included in the command line. + + 5. The smtp transport now supports options "tls_verify_hosts" and + "tls_try_verify_hosts". If either is set the certificate verification + is split from the encryption operation. The default remains that a failed + verification cancels the encryption. + + 6. New SERVERS override of default ldap server list. In the ACLs, an ldap + lookup can now set a list of servers to use that is different from the + default list. + + 7. New command-line option -C for exiqgrep to specify alternate exim.conf + file when searching the queue. + + 8. OCSP now supports GnuTLS also, if you have version 3.1.3 or later of that. + + 9. Support for DNSSEC on outbound connections. + +10. New variables "tls_(in,out)_(our,peer)cert" and expansion item + "certextract" to extract fields from them. Hash operators md5 and sha1 + work over them for generating fingerprints, and a new sha256 operator + for them added. + +11. PRDR is now supported dy default. + +12. OCSP stapling is now supported by default. + +13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output + Delivery Status Notification messages in MIME format, and negotiate + DSN features per RFC 3461. + + +Version 4.82 +------------ + + 1. New command-line option -bI:sieve will list all supported sieve extensions + of this Exim build on standard output, one per line. + ManageSieve (RFC 5804) providers managing scripts for use by Exim should + query this to establish the correct list to include in the protocol's + SIEVE capability line. + + 2. If the -n option is combined with the -bP option, then the name of an + emitted option is not output, only the value (if visible to you). + For instance, "exim -n -bP pid_file_path" should just emit a pathname + followed by a newline, and no other text. + + 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now + has a "tls_dh_min_bits" option, to set the minimum acceptable number of + bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites) + acceptable for security. (Option accepted but ignored if using OpenSSL). + Defaults to 1024, the old value. May be lowered only to 512, or raised as + far as you like. Raising this may hinder TLS interoperability with other + sites and is not currently recommended. Lowering this will permit you to + establish a TLS session which is not as secure as you might like. + + Unless you really know what you are doing, leave it alone. + + 4. If not built with DISABLE_DNSSEC, Exim now has the main option + dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library + to send the DO flag to your recursive resolver. If you have a recursive + resolver, which can set the Authenticated Data (AD) flag in results, Exim + can now detect this. Exim does not perform validation itself, instead + relying upon a trusted path to the resolver. + + Current status: work-in-progress; $sender_host_dnssec variable added. + + 5. DSCP support for outbound connections: on a transport using the smtp driver, + set "dscp = ef", for instance, to cause the connections to have the relevant + DSCP (IPv4 TOS or IPv6 TCLASS) value in the header. + + Similarly for inbound connections, there is a new control modifier, dscp, + so "warn control = dscp/ef" in the connect ACL, or after authentication. + + Supported values depend upon system libraries. "exim -bI:dscp" to list the + ones Exim knows of. You can also set a raw number 0..0x3F. + + 6. The -G command-line flag is no longer ignored; it is now equivalent to an + ACL setting "control = suppress_local_fixups". The -L command-line flag + is now accepted and forces use of syslog, with the provided tag as the + process name. A few other flags used by Sendmail are now accepted and + ignored. + + 7. New cutthrough routing feature. Requested by a "control = cutthrough_delivery" + ACL modifier; works for single-recipient mails which are received on and + deliverable via SMTP. Using the connection made for a recipient verify, + if requested before the verify, or a new one made for the purpose while + the inbound connection is still active. The bulk of the mail item is copied + direct from the inbound socket to the outbound (as well as the spool file). + When the source notifies the end of data, the data acceptance by the destination + is negotiated before the acceptance is sent to the source. If the destination + does not accept the mail item, for example due to content-scanning, the item + is not accepted from the source and therefore there is no need to generate + a bounce mail. This is of benefit when providing a secondary-MX service. + The downside is that delays are under the control of the ultimate destination + system not your own. + + The Received-by: header on items delivered by cutthrough is generated + early in reception rather than at the end; this will affect any timestamp + included. The log line showing delivery is recorded before that showing + reception; it uses a new ">>" tag instead of "=>". + + To support the feature, verify-callout connections can now use ESMTP and TLS. + The usual smtp transport options are honoured, plus a (new, default everything) + hosts_verify_avoid_tls. + + New variable families named tls_in_cipher, tls_out_cipher etc. are introduced + for specific access to the information for each connection. The old names + are present for now but deprecated. + + Not yet supported: IGNOREQUOTA, SIZE, PIPELINING. + + 8. New expansion operators ${listnamed:name} to get the content of a named list + and ${listcount:string} to count the items in a list. + + 9. New global option "gnutls_allow_auto_pkcs11", defaults false. The GnuTLS + rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11 + modules. For some situations this is desirable, but we expect admin in + those situations to know they want the feature. More commonly, it means + that GUI user modules get loaded and are broken by the setuid Exim being + unable to access files specified in environment variables and passed + through, thus breakage. So we explicitly inhibit the PKCS11 initialisation + unless this new option is set. + + Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability, + so have also added a build option which can be used to build Exim with GnuTLS + but without trying to use any kind of PKCS11 support. Uncomment this in the + Local/Makefile: + + AVOID_GNUTLS_PKCS11=yes + +10. The "acl = name" condition on an ACL now supports optional arguments. + New expansion item "${acl {name}{arg}...}" and expansion condition + "acl {{name}{arg}...}" are added. In all cases up to nine arguments + can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL. + Variable $acl_narg contains the number of arguments. If the ACL sets + a "message =" value this becomes the result of the expansion item, + or the value of $value for the expansion condition. If the ACL returns + accept the expansion condition is true; if reject, false. A defer + return results in a forced fail. + +11. Routers and transports can now have multiple headers_add and headers_remove + option lines. The concatenated list is used. + +12. New ACL modifier "remove_header" can remove headers before message gets + handled by routers/transports. + +13. New dnsdb lookup pseudo-type "a+". A sequence of "a6" (if configured), + "aaaa" and "a" lookups is done and the full set of results returned. + +14. New expansion variable $headers_added with content from ACL add_header + modifier (but not yet added to message). + +15. New 8bitmime status logging option for received messages. Log field "M8S". + +16. New authenticated_sender logging option, adding to log field "A". + +17. New expansion variables $router_name and $transport_name. Useful + particularly for debug_print as -bt command-line option does not + require privilege whereas -d does. + +18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a + proposed extension to SMTP from Eric Hall. + +19. The pipe transport has gained the force_command option, to allow + decorating commands from user .forward pipe aliases with prefix + wrappers, for instance. + +20. Callout connections can now AUTH; the same controls as normal delivery + connections apply. + +21. Support for DMARC, using opendmarc libs, can be enabled. It adds new + options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file. + It adds new expansion variables $dmarc_ar_header, $dmarc_status, + $dmarc_status_text, and $dmarc_used_domain. It adds a new acl modifier + dmarc_status. It adds new control flags dmarc_disable_verify and + dmarc_enable_forensic. The default for the dmarc_tld_file option is + "/etc/exim/opendmarc.tlds" and can be changed via EDITME. + +22. Add expansion variable $authenticated_fail_id, which is the username + provided to the authentication method which failed. It is available + for use in subsequent ACL processing (typically quit or notquit ACLs). + +23. New ACL modifier "udpsend" can construct a UDP packet to send to a given + UDP host and port. + +24. New ${hexquote:..string..} expansion operator converts non-printable + characters in the string to \xNN form. + +25. Experimental TPDA (Transport Post Delivery Action) function added. + Patch provided by Axel Rau. + +26. Experimental Redis lookup added. Patch provided by Warren Baker. + + +Version 4.80 +------------ + + 1. New authenticator driver, "gsasl". Server-only (at present). + This is a SASL interface, licensed under GPL, which can be found at + http://www.gnu.org/software/gsasl/. + This system does not provide sources of data for authentication, so + careful use needs to be made of the conditions in Exim. + + 2. New authenticator driver, "heimdal_gssapi". Server-only. + A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME + is no longer honoured for setuid programs by Heimdal. Use the + "server_keytab" option to point to the keytab. + + 3. The "pkg-config" system can now be used when building Exim to reference + cflags and library information for lookups and authenticators, rather + than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and + "LOOKUP_LIBS" directly. Similarly for handling the TLS library support + without adjusting "TLS_INCLUDE" and "TLS_LIBS". + + In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to + find the headers and libraries for PCRE. + + 4. New expansion variable $tls_bits. + + 5. New lookup type, "dbmjz". Key is an Exim list, the elements of which will + be joined together with ASCII NUL characters to construct the key to pass + into the DBM library. Can be used with gsasl to access sasldb2 files as + used by Cyrus SASL. + + 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1. + + Avoid release 1.0.1a if you can. Note that the default value of + "openssl_options" is no longer "+dont_insert_empty_fragments", as that + increased susceptibility to attack. This may still have interoperability + implications for very old clients (see version 4.31 change 37) but + administrators can choose to make the trade-off themselves and restore + compatibility at the cost of session security. + + 7. Use of the new expansion variable $tls_sni in the main configuration option + tls_certificate will cause Exim to re-expand the option, if the client + sends the TLS Server Name Indication extension, to permit choosing a + different certificate; tls_privatekey will also be re-expanded. You must + still set these options to expand to valid files when $tls_sni is not set. + + The SMTP Transport has gained the option tls_sni, which will set a hostname + for outbound TLS sessions, and set $tls_sni too. + + A new log_selector, +tls_sni, has been added, to log received SNI values + for Exim as a server. + + 8. The existing "accept_8bitmime" option now defaults to true. This means + that Exim is deliberately not strictly RFC compliant. We're following + Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default. + Those who disagree, or know that they are talking to mail servers that, + even today, are not 8-bit clean, need to turn off this option. + + 9. Exim can now be started with -bw (with an optional timeout, given as + -bw). With this, stdin at startup is a socket that is + already listening for connections. This has a more modern name of + "socket activation", but forcing the activated socket to fd 0. We're + interested in adding more support for modern variants. + +10. ${eval } now uses 64-bit values on supporting platforms. A new "G" suffix + for numbers indicates multiplication by 1024^3. + +11. The GnuTLS support has been revamped; the three options gnutls_require_kx, + gnutls_require_mac & gnutls_require_protocols are no longer supported. + tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority + string, documentation for which is at: + http://www.gnutls.org/manual/html_node/Priority-Strings.html + + SNI support has been added to Exim's GnuTLS integration too. + + For sufficiently recent GnuTLS libraries, ${randint:..} will now use + gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness. + +12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file + is now available. If the contents of the file are valid, then Exim will + send that back in response to a TLS status request; this is OCSP Stapling. + Exim will not maintain the contents of the file in any way: administrators + are responsible for ensuring that it is up-to-date. + + See "experimental-spec.txt" for more details. + +13. ${lookup dnsdb{ }} supports now SPF record types. They are handled + identically to TXT record lookups. + +14. New expansion variable $tod_epoch_l for higher-precision time. + +15. New global option tls_dh_max_bits, defaulting to current value of NSS + hard-coded limit of DH ephemeral bits, to fix interop problems caused by + GnuTLS 2.12 library recommending a bit count higher than NSS supports. + +16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier. + Option can now be a path or an identifier for a standard prime. + If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23". + Set to "historic" to get the old GnuTLS behaviour of auto-generated DH + primes. + +17. SSLv2 now disabled by default in OpenSSL. (Never supported by GnuTLS). + Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL + install was not built with OPENSSL_NO_SSL2 ("no-ssl2"). + + +Version 4.77 +------------ + + 1. New options for the ratelimit ACL condition: /count= and /unique=. + The /noupdate option has been replaced by a /readonly option. + + 2. The SMTP transport's protocol option may now be set to "smtps", to + use SSL-on-connect outbound. + + 3. New variable $av_failed, set true if the AV scanner deferred; ie, when + there is a problem talking to the AV scanner, or the AV scanner running. + + 4. New expansion conditions, "inlist" and "inlisti", which take simple lists + and check if the search item is a member of the list. This does not + support named lists, but does subject the list part to string expansion. + + 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was + built, Exim no longer performs string expansion on the second string of + the match_* expansion conditions: "match_address", "match_domain", + "match_ip" & "match_local_part". Named lists can still be used. + + +Version 4.76 +------------ + + 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on + or off in the resolver library. + + +Version 4.75 +------------ + + 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there + is now LDAP/TLS support, given sufficiently modern OpenLDAP client + libraries. The following global options have been added in support of + this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key, + ldap_cipher_suite, ldap_require_cert, ldap_start_tls. + + 2. The pipe transport now takes a boolean option, "freeze_signal", default + false. When true, if the external delivery command exits on a signal then + Exim will freeze the message in the queue, instead of generating a bounce. + + 3. Log filenames may now use %M as an escape, instead of %D (still available). + The %M pattern expands to yyyymm, providing month-level resolution. + + 4. The $message_linecount variable is now updated for the maildir_tag option, + in the same way as $message_size, to reflect the real number of lines, + including any header additions or removals from transport. + + 5. When contacting a pool of SpamAssassin servers configured in spamd_address, + Exim now selects entries randomly, to better scale in a cluster setup. + + +Version 4.74 +------------ + + 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux) + the flaw permitted the Exim run-time user to cause root to append to + arbitrary files of the attacker's choosing, with the content based + on content supplied by the attacker. + + 2. Exim now supports loading some lookup types at run-time, using your + platform's dlopen() functionality. This has limited platform support + and the intention is not to support every variant, it's limited to + dlopen(). This permits the main Exim binary to not be linked against + all the libraries needed for all the lookup types. + + +Version 4.73 +------------ + + NOTE: this version is not guaranteed backwards-compatible, please read the + items below carefully + + 1. A new main configuration option, "openssl_options", is available if Exim + is built with SSL support provided by OpenSSL. The option allows + administrators to specify OpenSSL options to be used on connections; + typically this is to set bug compatibility features which the OpenSSL + developers have not enabled by default. There may be security + consequences for certain options, so these should not be changed + frivolously. + + 2. A new pipe transport option, "permit_coredumps", may help with problem + diagnosis in some scenarios. Note that Exim is typically installed as + a setuid binary, which on most OSes will inhibit coredumps by default, + so that safety mechanism would have to be overridden for this option to + be able to take effect. + + 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless + Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes + Note that this switches Exim to use a new API ("INSTREAM") and a future + release of ClamAV will remove support for the old API ("STREAM"). + + The av_scanner option, when set to "clamd", now takes an optional third + part, "local", which causes Exim to pass a filename to ClamAV instead of + the file content. This is the same behaviour as when clamd is pointed at + a Unix-domain socket. For example: + + av_scanner = clamd:192.0.2.3 1234:local + + ClamAV's ExtendedDetectionInfo response format is now handled. + + 4. There is now a -bmalware option, restricted to admin users. This option + takes one parameter, a filename, and scans that file with Exim's + malware-scanning framework. This is intended purely as a debugging aid + to ensure that Exim's scanning is working, not to replace other tools. + Note that the ACL framework is not invoked, so if av_scanner references + ACL variables without a fallback then this will fail. + + 5. There is a new expansion operator, "reverse_ip", which will reverse IP + addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples: + + ${reverse_ip:192.0.2.4} + -> 4.2.0.192 + ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3} + -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2 + + 6. There is a new ACL control called "debug", to enable debug logging. + This allows selective logging of certain incoming transactions within + production environments, with some care. It takes two options, "tag" + and "opts"; "tag" is included in the filename of the log and "opts" + is used as per the -d command-line option. Examples, which + don't all make sense in all contexts: + + control = debug + control = debug/tag=.$sender_host_address + control = debug/opts=+expand+acl + control = debug/tag=.$message_exim_id/opts=+expand + + 7. It has always been implicit in the design and the documentation that + "the Exim user" is not root. src/EDITME said that using root was + "very strongly discouraged". This is not enough to keep people from + shooting themselves in the foot in days when many don't configure Exim + themselves but via package build managers. The security consequences of + running various bits of network code are severe if there should be bugs in + them. As such, the Exim user may no longer be root. If configured + statically, Exim will refuse to build. If configured as ref:user then Exim + will exit shortly after start-up. If you must shoot yourself in the foot, + then henceforth you will have to maintain your own local patches to strip + the safeties off. + + 8. There is a new expansion condition, bool_lax{}. Where bool{} uses the ACL + condition logic to determine truth/failure and will fail to expand many + strings, bool_lax{} uses the router condition logic, where most strings + do evaluate true. + Note: bool{00} is false, bool_lax{00} is true. + + 9. Routers now support multiple "condition" tests. + +10. There is now a runtime configuration option "tcp_wrappers_daemon_name". + Setting this allows an admin to define which entry in the tcpwrappers + config file will be used to control access to the daemon. This option + is only available when Exim is built with USE_TCP_WRAPPERS. The + default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME + build option. + +11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now + the Exim run-time user, instead of root. + +12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and + is forced on. This is mitigated by the new build option + TRUSTED_CONFIG_LIST which defines a list of configuration files which + are trusted; one per line. If a config file is owned by root and matches + a pathname in the list, then it may be invoked by the Exim build-time + user without Exim relinquishing root privileges. + +13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically + trusted to supply -D overrides on the command-line. Going + forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that + include the main config. As a transition mechanism, we are temporarily + providing a work-around: the new build option WHITELIST_D_MACROS provides + a colon-separated list of macro names which may be overridden by the Exim + run-time user. The values of these macros are constrained to the regex + ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values). + + +Version 4.72 +------------ + + 1. TWO SECURITY FIXES: one relating to mail-spools which are globally + writable, the other to locking of MBX folders (not mbox). + + 2. MySQL stored procedures are now supported. + + 3. The dkim_domain transport option is now a list, not a single string, and + messages will be signed for each element in the list (discarding + duplicates). + + 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups + in the presence of multiple character strings within the RR. Prior to 4.70, + only the first string would be returned. The dnsdb lookup now, by default, + preserves the pre-4.70 semantics, but also now takes an extended output + separator specification. The separator can be followed by a semicolon, to + concatenate the individual text strings together with no join character, + or by a comma and a second separator character, in which case the text + strings within a TXT record are joined on that second character. + Administrators are reminded that DNS provides no ordering guarantees + between multiple records in an RRset. For example: + + foo.example. IN TXT "a" "b" "c" + foo.example. IN TXT "d" "e" "f" + + ${lookup dnsdb{>/ txt=foo.example}} -> "a/d" + ${lookup dnsdb{>/; txt=foo.example}} -> "def/abc" + ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f" + + +Version 4.70 / 4.71 +------------------- + + 1. Native DKIM support without an external library. + (Note that if no action to prevent it is taken, a straight upgrade will + result in DKIM verification of all signed incoming emails. See spec + for details on conditionally disabling) + + 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha). + + 3. There is now a bool{} expansion condition which maps certain strings to + true/false condition values (most likely of use in conjunction with the + and{} expansion operator). + + 4. The $spam_score, $spam_bar and $spam_report variables are now available + at delivery time. + + 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as + options, provided that Exim is invoked by an admin_user. + + 6. There is a new option gnutls_compat_mode, when linked against GnuTLS, + which increases compatibility with older clients at the cost of decreased + security. Don't set this unless you need to support such clients. + + 7. There is a new expansion operator, ${randint:...} which will produce a + "random" number less than the supplied integer. This randomness is + not guaranteed to be cryptographically strong, but depending upon how + Exim was built may be better than the most naive schemes. + + 8. Exim now explicitly ensures that SHA256 is available when linked against + OpenSSL. + + 9. The transport_filter_timeout option now applies to SMTP transports too. + + +Version 4.69 +------------ + + 1. Preliminary DKIM support in Experimental. + + +Version 4.68 +------------ + + 1. The body_linecount and body_zerocount C variables are now exported in the + local_scan API. + + 2. When a dnslists lookup succeeds, the key that was looked up is now placed + in $dnslist_matched. When the key is an IP address, it is not reversed in + this variable (though it is, of course, in the actual lookup). In simple + cases, for example: + + deny dnslists = spamhaus.example + + the key is also available in another variable (in this case, + $sender_host_address). In more complicated cases, however, this is not + true. For example, using a data lookup might generate a dnslists lookup + like this: + + deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|... + + If this condition succeeds, the value in $dnslist_matched might be + 192.168.6.7 (for example). + + 3. Authenticators now have a client_condition option. When Exim is running as + a client, it skips an authenticator whose client_condition expansion yields + "0", "no", or "false". This can be used, for example, to skip plain text + authenticators when the connection is not encrypted by a setting such as: + + client_condition = ${if !eq{$tls_cipher}{}} + + Note that the 4.67 documentation states that $tls_cipher contains the + cipher used for incoming messages. In fact, during SMTP delivery, it + contains the cipher used for the delivery. The same is true for + $tls_peerdn. + + 4. There is now a -Mvc option, which outputs a copy of the + message to the standard output, in RFC 2822 format. The option can be used + only by an admin user. + + 5. There is now a /noupdate option for the ratelimit ACL condition. It + computes the rate and checks the limit as normal, but it does not update + the saved data. This means that, in relevant ACLs, it is possible to lookup + the existence of a specified (or auto-generated) ratelimit key without + incrementing the ratelimit counter for that key. + + In order for this to be useful, another ACL entry must set the rate + for the same key somewhere (otherwise it will always be zero). + + Example: + + acl_check_connect: + # Read the rate; if it doesn't exist or is below the maximum + # we update it below + deny ratelimit = 100 / 5m / strict / noupdate + log_message = RATE: $sender_rate / $sender_rate_period \ + (max $sender_rate_limit) + + [... some other logic and tests...] + + warn ratelimit = 100 / 5m / strict / per_cmd + log_message = RATE UPDATE: $sender_rate / $sender_rate_period \ + (max $sender_rate_limit) + condition = ${if le{$sender_rate}{$sender_rate_limit}} + + accept + + 6. The variable $max_received_linelength contains the number of bytes in the + longest line that was received as part of the message, not counting the + line termination character(s). + + 7. Host lists can now include +ignore_defer and +include_defer, analagous to + +ignore_unknown and +include_unknown. These options should be used with + care, probably only in non-critical host lists such as whitelists. + + 8. There's a new option called queue_only_load_latch, which defaults true. + If set false when queue_only_load is greater than zero, Exim re-evaluates + the load for each incoming message in an SMTP session. Otherwise, once one + message is queued, the remainder are also. + + 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most + cases when an SMTP session ends without sending QUIT. However, when Exim + itself is is bad trouble, such as being unable to write to its log files, + this ACL is not run, because it might try to do things (such as write to + log files) that make the situation even worse. + + Like the QUIT ACL, this new ACL is provided to make it possible to gather + statistics. Whatever it returns (accept or deny) is immaterial. The "delay" + modifier is forbidden in this ACL. + + When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set + to a string that indicates the reason for the termination of the SMTP + connection. The possible values are: + + acl-drop Another ACL issued a "drop" command + bad-commands Too many unknown or non-mail commands + command-timeout Timeout while reading SMTP commands + connection-lost The SMTP connection has been lost + data-timeout Timeout while reading message data + local-scan-error The local_scan() function crashed + local-scan-timeout The local_scan() function timed out + signal-exit SIGTERM or SIGINT + synchronization-error SMTP synchronization error + tls-failed TLS failed to start + + In most cases when an SMTP connection is closed without having received + QUIT, Exim sends an SMTP response message before actually closing the + connection. With the exception of acl-drop, the default message can be + overridden by the "message" modifier in the NOTQUIT ACL. In the case of a + "drop" verb in another ACL, it is the message from the other ACL that is + used. + +10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of + servers with individual queries. This is done by starting the query with + "servers=x:y:z;", where each item in the list may take one of two forms: + + (1) If it is just a host name, the appropriate global option (mysql_servers + or pgsql_servers) is searched for a host of the same name, and the + remaining parameters (database, user, password) are taken from there. + + (2) If it contains any slashes, it is taken as a complete parameter set. + + The list of servers is used in exactly the same was as the global list. + Once a connection to a server has happened and a query has been + successfully executed, processing of the lookup ceases. + + This feature is intended for use in master/slave situations where updates + are occurring, and one wants to update a master rather than a slave. If the + masters are in the list for reading, you might have: + + mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw + + In an updating lookup, you could then write + + ${lookup mysql{servers=master; UPDATE ...} + + If, on the other hand, the master is not to be used for reading lookups: + + pgsql_servers = slave1/db/name/pw:slave2/db/name/pw + + you can still update the master by + + ${lookup pgsql{servers=master/db/name/pw; UPDATE ...} + +11. The message_body_newlines option (default FALSE, for backwards + compatibility) can be used to control whether newlines are present in + $message_body and $message_body_end. If it is FALSE, they are replaced by + spaces. + + +Version 4.67 +------------ + + 1. There is a new log selector called smtp_no_mail, which is not included in + the default setting. When it is set, a line is written to the main log + whenever an accepted SMTP connection terminates without having issued a + MAIL command. + + 2. When an item in a dnslists list is followed by = and & and a list of IP + addresses, the behaviour was not clear when the lookup returned more than + one IP address. This has been solved by the addition of == and =& for "all" + rather than the default "any" matching. + + 3. Up till now, the only control over which cipher suites GnuTLS uses has been + for the cipher algorithms. New options have been added to allow some of the + other parameters to be varied. + + 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is + set, Exim compiles a runtime option called disable_fsync. + + 5. There is a new variable called $smtp_count_at_connection_start. + + 6. There's a new control called no_pipelining. + + 7. There are two new variables called $sending_ip_address and $sending_port. + These are set whenever an SMTP connection to another host has been set up. + + 8. The expansion of the helo_data option in the smtp transport now happens + after the connection to the server has been made. + + 9. There is a new expansion operator ${rfc2047d: that decodes strings that + are encoded as per RFC 2047. + +10. There is a new log selector called "pid", which causes the current process + id to be added to every log line, in square brackets, immediately after the + time and date. + +11. Exim has been modified so that it flushes SMTP output before implementing + a delay in an ACL. It also flushes the output before performing a callout, + as this can take a substantial time. These behaviours can be disabled by + obeying control = no_delay_flush or control = no_callout_flush, + respectively, at some earlier stage of the connection. + +12. There are two new expansion conditions that iterate over a list. They are + called forany and forall. + +13. There's a new global option called dsn_from that can be used to vary the + contents of From: lines in bounces and other automatically generated + messages ("delivery status notifications" - hence the name of the option). + +14. The smtp transport has a new option called hosts_avoid_pipelining. + +15. By default, exigrep does case-insensitive matches. There is now a -I option + that makes it case-sensitive. + +16. A number of new features ("addresses", "map", "filter", and "reduce") have + been added to string expansions to make it easier to process lists of + items, typically addresses. + +17. There's a new ACL modifier called "continue". It does nothing of itself, + and processing of the ACL always continues with the next condition or + modifier. It is provided so that the side effects of expanding its argument + can be used. + +18. It is now possible to use newline and other control characters (those with + values less than 32, plus DEL) as separators in lists. + +19. The exigrep utility now has a -v option, which inverts the matching + condition. + +20. The host_find_failed option in the manualroute router can now be set to + "ignore". + + +Version 4.66 +------------ + +No new features were added to 4.66. + + +Version 4.65 +------------ + +No new features were added to 4.65. + + +Version 4.64 +------------ + + 1. ACL variables can now be given arbitrary names, as long as they start with + "acl_c" or "acl_m" (for connection variables and message variables), are at + least six characters long, with the sixth character being either a digit or + an underscore. + + 2. There is a new ACL modifier called log_reject_target. It makes it possible + to specify which logs are used for messages about ACL rejections. + + 3. There is a new authenticator called "dovecot". This is an interface to the + authentication facility of the Dovecot POP/IMAP server, which can support a + number of authentication methods. + + 4. The variable $message_headers_raw provides a concatenation of all the + messages's headers without any decoding. This is in contrast to + $message_headers, which does RFC2047 decoding on the header contents. + + 5. In a DNS black list, if two domain names, comma-separated, are given, the + second is used first to do an initial check, making use of any IP value + restrictions that are set. If there is a match, the first domain is used, + without any IP value restrictions, to get the TXT record. + + 6. All authenticators now have a server_condition option. + + 7. There is a new command-line option called -Mset. It is useful only in + conjunction with -be (that is, when testing string expansions). It must be + followed by a message id; Exim loads the given message from its spool + before doing the expansions. + + 8. Another similar new command-line option is called -bem. It operates like + -be except that it must be followed by the name of a file that contains a + message. + + 9. When an address is delayed because of a 4xx response to a RCPT command, it + is now the combination of sender and recipient that is delayed in + subsequent queue runs until its retry time is reached. + +10. Unary negation and the bitwise logical operators and, or, xor, not, and + shift, have been added to the eval: and eval10: expansion items. + +11. The variables $interface_address and $interface_port have been renamed + as $received_ip_address and $received_port, to make it clear that they + relate to message reception rather than delivery. (The old names remain + available for compatibility.) + +12. The "message" modifier can now be used on "accept" and "discard" acl verbs + to vary the message that is sent when an SMTP command is accepted. + + +Version 4.63 +------------ + +1. There is a new Boolean option called filter_prepend_home for the redirect + router. + +2. There is a new acl, set by acl_not_smtp_start, which is run right at the + start of receiving a non-SMTP message, before any of the message has been + read. + +3. When an SMTP error message is specified in a "message" modifier in an ACL, + or in a :fail: or :defer: message in a redirect router, Exim now checks the + start of the message for an SMTP error code. + +4. There is a new parameter for LDAP lookups called "referrals", which takes + one of the settings "follow" (the default) or "nofollow". + +5. Version 20070721.2 of exipick now included, offering these new options: + --reverse + After all other sorting options have bee processed, reverse order + before displaying messages (-R is synonym). + --random + Randomize order of matching messages before displaying. + --size + Instead of displaying the matching messages, display the sum + of their sizes. + --sort [,...] + Before displaying matching messages, sort the messages according to + each messages value for each variable. + --not + Negate the value for every test (returns inverse output from the + same criteria without --not). + + +Version 4.62 +------------ + +1. The ${readsocket expansion item now supports Internet domain sockets as well + as Unix domain sockets. If the first argument begins "inet:", it must be of + the form "inet:host:port". The port is mandatory; it may be a number or the + name of a TCP port in /etc/services. The host may be a name, or it may be an + IP address. An ip address may optionally be enclosed in square brackets. + This is best for IPv6 addresses. For example: + + ${readsocket{inet:[::1]:1234}{}... + + Only a single host name may be given, but if looking it up yield more than + one IP address, they are each tried in turn until a connection is made. Once + a connection has been made, the behaviour is as for ${readsocket with a Unix + domain socket. + +2. If a redirect router sets up file or pipe deliveries for more than one + incoming address, and the relevant transport has batch_max set greater than + one, a batch delivery now occurs. + +3. The appendfile transport has a new option called maildirfolder_create_regex. + Its value is a regular expression. For a maildir delivery, this is matched + against the maildir directory; if it matches, Exim ensures that a + maildirfolder file is created alongside the new, cur, and tmp directories. + + +Version 4.61 +------------ + +The documentation is up-to-date for the 4.61 release. Major new features since +the 4.60 release are: + +. An option called disable_ipv6, to disable the use of IPv6 completely. + +. An increase in the number of ACL variables to 20 of each type. + +. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1, + $2, $3, (though those are still set) because the numeric variables get used + for other things in complicated expansions. + +. The default for rfc1413_query_timeout has been changed from 30s to 5s. + +. It is possible to use setclassresources() on some BSD OS to control the + resources used in pipe deliveries. + +. A new ACL modifier called add_header, which can be used with any verb. + +. More errors are detectable in retry rules. + +There are a number of other additions too. + + +Version 4.60 +------------ + +The documentation is up-to-date for the 4.60 release. Major new features since +the 4.50 release are: + +. Support for SQLite. + +. Support for IGNOREQUOTA in LMTP. + +. Extensions to the "submission mode" features. + +. Support for Client SMTP Authorization (CSA). + +. Support for ratelimiting hosts and users. + +. New expansion items to help with the BATV "prvs" scheme. + +. A "match_ip" condition, that matches an IP address against a list. + +There are many more minor changes. ****