X-Git-Url: https://git.exim.org/users/heiko/exim.git/blobdiff_plain/1ef01bc6ea1e26fac17df1bd5faf306478bab667..2081aac24b67f3f3f34389aadc06354abcad0cad:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 9336151e5..5c42afc93 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -45,7 +45,7 @@ . Update the Copyright year (only) when changing content. . ///////////////////////////////////////////////////////////////////////////// -.set previousversion "4.93" +.set previousversion "4.94" .include ./local_params .set ACL "access control lists (ACLs)" @@ -161,6 +161,13 @@ .macro index .echo "** Don't use .index; use .cindex or .oindex or .vindex" .endmacro + + +. use this for a concept-index entry for a header line +.macro chindex +.cindex "&'$1'& header line" +.cindex "header lines" $1 +.endmacro . //////////////////////////////////////////////////////////////////////////// @@ -193,6 +200,8 @@ . This chunk of literal XML implements index entries of the form "x, see y" and . "x, see also y". However, the DocBook DTD doesn't allow entries . at the top level, so we have to put the .chapter directive first. + +. These do not turn up in the HTML output, unfortunately. The PDF does get them. . ///////////////////////////////////////////////////////////////////////////// .chapter "Introduction" "CHID1" @@ -318,6 +327,10 @@ zero, binary binary zero + + headers + header lines + .literal off @@ -1394,9 +1407,22 @@ Again, cutthrough delivery counts as a verification. .next Individual routers can be explicitly skipped when running the routers to check an address given in the SMTP EXPN command (see the &%expn%& option). + .next If the &%domains%& option is set, the domain of the address must be in the set of domains that it defines. +.new +.cindex "tainted data" "de-tainting" +A match verifies the variable &$domain$& (which carries tainted data) +and assigns an untainted value to the &$domain_data$& variable. +Such an untainted value is often needed in the transport. +For specifics of the matching operation and the resulting untainted value, +refer to section &<>&. + +When an untainted value is wanted, use this option +rather than the generic &%condition%& option. +.wen + .next .vindex "&$local_part_prefix$&" .vindex "&$local_part_prefix_v$&" @@ -1405,15 +1431,26 @@ of domains that it defines. .vindex "&$local_part_suffix_v$&" .cindex affix "router precondition" If the &%local_parts%& option is set, the local part of the address must be in -the set of local parts that it defines. If &%local_part_prefix%& or +the set of local parts that it defines. +.new +A match verifies the variable &$local_part$& (which carries tainted data) +and assigns an untainted value to the &$local_part_data$& variable. +Such an untainted value is often needed in the transport. +For specifics of the matching operation and the resulting untainted value, +refer to section &<>&. + +When an untainted value is wanted, use this option +rather than the generic &%condition%& option. +.wen + +If &%local_part_prefix%& or &%local_part_suffix%& is in use, the prefix or suffix is removed from the local part before this check. If you want to do precondition tests on local parts that include affixes, you can do so by using a &%condition%& option (see below) -.new that uses the variables &$local_part$&, &$local_part_prefix$&, &$local_part_prefix_v$&, &$local_part_suffix$& and &$local_part_suffix_v$& as necessary. -.wen + .next .vindex "&$local_user_uid$&" .vindex "&$local_user_gid$&" @@ -1423,23 +1460,37 @@ an account on the local host. If this check succeeds, the uid and gid of the local user are placed in &$local_user_uid$& and &$local_user_gid$& and the user's home directory is placed in &$home$&; these values can be used in the remaining preconditions. + .next If the &%router_home_directory%& option is set, it is expanded at this point, because it overrides the value of &$home$&. If this expansion were left till later, the value of &$home$& as set by &%check_local_user%& would be used in subsequent tests. Having two different values of &$home$& in the same router could lead to confusion. + .next If the &%senders%& option is set, the envelope sender address must be in the set of addresses that it defines. + .next If the &%require_files%& option is set, the existence or non-existence of specified files is tested. + .next .cindex "customizing" "precondition" If the &%condition%& option is set, it is evaluated and tested. This option uses an expanded string to allow you to set up your own custom preconditions. Expanded strings are described in chapter &<>&. + +.new +Note that while using +this option for address matching technically works, +it does not set any de-tainted values. +Such values are often needed, either for router-specific options or +for transport options. +Using the &%domains%& and &%local_parts%& options is usually the most +convenient way to obtain them. +.wen .endlist @@ -2645,10 +2696,8 @@ Exim through the local interface (see the &%-bm%& and &%-f%& options below). See the &%untrusted_set_sender%& option for a way of permitting non-trusted users to set envelope senders. -.cindex "&'From:'& header line" -.cindex "&'Sender:'& header line" -.cindex "header lines" "From:" -.cindex "header lines" "Sender:" +.chindex From: +.chindex Sender: For a trusted user, there is never any check on the contents of the &'From:'& header line, and a &'Sender:'& line is never added. Furthermore, any existing &'Sender:'& line in incoming local (non-TCP/IP) messages is not removed. @@ -3847,7 +3896,9 @@ id, and the remaining ones must be email addresses. However, if the message is active (in the middle of a delivery attempt), it is not altered. This option can be used only by an admin user. -.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&~<&'sequence&~number'&>&&& +.vitem "&%-MC%&&~<&'transport'&>&~<&'hostname'&>&&& + &~<&'host&~IP'&>&&& + &~<&'sequence&~number'&>&&& &~<&'message&~id'&>" .oindex "&%-MC%&" .cindex "SMTP" "passed connection" @@ -3871,13 +3922,11 @@ This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option. It signifies that the remote host supports the ESMTP &_DSN_& extension. -.new .vitem &%-MCd%& .oindex "&%-MCd%&" This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-d%& option to pass on an information string on the purpose of the process. -.wen .vitem &%-MCG%&&~<&'queue&~name'&> .oindex "&%-MCG%&" @@ -3897,6 +3946,15 @@ This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option. It signifies that the server to which Exim is connected supports pipelining. +.new +.vitem &%-MCp%& +.oindex "&%-MCp%&" +This option is not intended for use by external callers. It is used internally +by Exim in conjunction with the &%-MC%& option. It signifies that the connection +t a remote server is via a SOCKS proxy, using addresses and ports given by +the following four arguments. +.wen + .vitem &%-MCQ%&&~<&'process&~id'&>&~<&'pipe&~fd'&> .oindex "&%-MCQ%&" This option is not intended for use by external callers. It is used internally @@ -3906,11 +3964,18 @@ together with the file descriptor number of an open pipe. Closure of the pipe signals the final completion of the sequence of processes that are passing messages through the same SMTP connection. +.new +.vitem &%-MCq%&&~<&'recipient&~address'&>&~<&'size'&> +.oindex "&%-MCq%&" +This option is not intended for use by external callers. It is used internally +by Exim to implement quota checking for local users. +.wen + .vitem &%-MCS%& .oindex "&%-MCS%&" This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option, and passes on the fact that the -SMTP SIZE option should be used on messages delivered down the existing +ESMTP SIZE option should be used on messages delivered down the existing connection. .vitem &%-MCT%& @@ -3919,6 +3984,18 @@ This option is not intended for use by external callers. It is used internally by Exim in conjunction with the &%-MC%& option, and passes on the fact that the host to which Exim is connected supports TLS encryption. +.new +.vitem &%-MCr%&&~<&'SNI'&> &&& + &%-MCs%&&~<&'SNI'&> +.oindex "&%-MCs%&" +.oindex "&%-MCr%&" +These options are not intended for use by external callers. It is used internally +by Exim in conjunction with the &%-MCt%& option, and passes on the fact that +a TLS Server Name Indication was sent as part of the channel establishment. +The argument gives the SNI string. +The "r" variant indicates a DANE-verified connection. +.wen + .vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&> .oindex "&%-MCt%&" This option is not intended for use by external callers. It is used internally @@ -4397,7 +4474,6 @@ written. When &%-oX%& is used with &%-bd%&, or when &%-q%& with a time is used without &%-bd%&, this is the only way of causing Exim to write a pid file, because in those cases, the normal pid file is not used. -.new .vitem &%-oPX%& .oindex "&%-oPX%&" .cindex "pid (process id)" "of daemon" @@ -4406,7 +4482,6 @@ This option is not intended for general use. The daemon uses it when terminating due to a SIGTEM, possibly in combination with &%-oP%&&~<&'path'&>. It causes the pid file to be removed. -.wen .vitem &%-or%&&~<&'time'&> .oindex "&%-or%&" @@ -4440,6 +4515,27 @@ of the syntax, and how it interacts with configuration file options, are given in chapter &<>&. When &%-oX%& is used to start a daemon, no pid file is written unless &%-oP%& is also present to specify a pid filename. +.new +.vitem &%-oY%& +.oindex &%-oY%& +.cindex "daemon notifier socket" +This option controls the creation of an inter-process communications endpoint +by the Exim daemon. +It is only relevant when the &%-bd%& (start listening daemon) option is also +given. +Normally the daemon creates this socket, unless a &%-oX%& and &*no*& &%-oP%& +option is also present. +If this option is given then the socket will not be created. This could be +required if the system is running multiple daemons. + +The socket is currently used for +.ilist +fast ramp-up of queue runner processes +.next +obtaining a current queue size +.endlist +.wen + .vitem &%-pd%& .oindex "&%-pd%&" .cindex "Perl" "starting the interpreter" @@ -4518,14 +4614,17 @@ appear in the correct order. Each flag is described in a separate item below. .cindex "queue" "routing" .cindex "routing" "whole queue before delivery" .cindex "first pass routing" +.cindex "queue runner" "two phase" An option starting with &%-qq%& requests a two-stage queue run. In the first stage, the queue is scanned as if the &%queue_smtp_domains%& option matched every domain. Addresses are routed, local deliveries happen, but no remote transports are run. -.new Performance will be best if the &%queue_run_in_order%& option is false. -.wen +If that is so and the &%queue_fast_ramp%& option is true then +in the first phase of the run, +once a threshold number of messages are routed for a given host, +a delivery process is forked in parallel with the rest of the scan. .cindex "hints database" "remembering routing" The hints database that remembers which messages are waiting for specific hosts @@ -4705,9 +4804,9 @@ recognized when Exim is run normally. It allows for the setting up of explicit .vitem &%-t%& .oindex "&%-t%&" .cindex "recipient" "extracting from header lines" -.cindex "&'Bcc:'& header line" -.cindex "&'Cc:'& header line" -.cindex "&'To:'& header line" +.chindex Bcc: +.chindex Cc: +.chindex To: When Exim is receiving a locally-generated, non-SMTP message on its standard input, the &%-t%& option causes the recipients of the message to be obtained from the &'To:'&, &'Cc:'&, and &'Bcc:'& header lines in the message instead of @@ -5399,8 +5498,8 @@ local_interfaces = 127.0.0.1 : ::::1 contains two IP addresses, the IPv4 address 127.0.0.1 and the IPv6 address ::1. &*Note*&: Although leading and trailing white space is ignored in individual -list items, it is not ignored when parsing the list. The space after the first -colon in the example above is necessary. If it were not there, the list would +list items, it is not ignored when parsing the list. The spaces around the first +colon in the example above are necessary. If they were not there, the list would be interpreted as the two items 127.0.0.1:: and 1. .section "Changing list separators" "SECTlistsepchange" @@ -5905,13 +6004,13 @@ messages that are submitted by SMTP from local processes using the standard input and output (that is, not using TCP/IP). A number of MUAs operate in this manner. .code -deny message = Restricted characters in address - domains = +local_domains +deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] + message = Restricted characters in address -deny message = Restricted characters in address - domains = !+local_domains +deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ + message = Restricted characters in address .endd These statements are concerned with local parts that contain any of the characters &"@"&, &"%"&, &"!"&, &"/"&, &"|"&, or dots in unusual places. @@ -6015,10 +6114,10 @@ require verify = recipient This statement requires the recipient address to be verified; if verification fails, the address is rejected. .code -# deny message = rejected because $sender_host_address \ +# deny dnslists = black.list.example +# message = rejected because $sender_host_address \ # is in a black list at $dnslist_domain\n\ # $dnslist_text -# dnslists = black.list.example # # warn dnslists = black.list.example # add_header = X-Warning: $sender_host_address is in \ @@ -6334,9 +6433,9 @@ smarthost_smtp: # request with your smarthost provider to get things fixed: hosts_require_tls = * tls_verify_hosts = * - # As long as tls_verify_hosts is enabled, this won't matter, but if you - # have to comment it out then this will at least log whether you succeed - # or not: + # As long as tls_verify_hosts is enabled, this this will have no effect, + # but if you have to comment it out then this will at least log whether + # you succeed or not: tls_try_verify_hosts = * # # The SNI name should match the name which we'll expect to verify; @@ -6381,7 +6480,7 @@ All other options are defaulted. .code local_delivery: driver = appendfile - file = /var/mail/$local_part_verified + file = /var/mail/$local_part_data delivery_date_add envelope_to_add return_path_add @@ -6391,13 +6490,11 @@ local_delivery: This &(appendfile)& transport is used for local delivery to user mailboxes in traditional BSD mailbox format. -.new We prefer to avoid using &$local_part$& directly to define the mailbox filename, as it is provided by a potential bad actor. -Instead we use &$local_part_verified$&, +Instead we use &$local_part_data$&, the result of looking up &$local_part$& in the user database (done by using &%check_local_user%& in the the router). -.wen By default &(appendfile)& runs under the uid and gid of the local user, which requires the sticky bit to be set on the &_/var/mail_& @@ -6604,14 +6701,15 @@ cause parts of the string to be replaced by data that is obtained from the lookup. Lookups of this type are conditional expansion items. Different results can be defined for the cases of lookup success and failure. See chapter &<>&, where string expansions are described in detail. -The key for the lookup is specified as part of the string expansion. +The key for the lookup is &*specified*& as part of the string expansion. .next Lists of domains, hosts, and email addresses can contain lookup requests as a way of avoiding excessively long linear lists. In this case, the data that is returned by the lookup is often (but not always) discarded; whether the lookup succeeds or fails is what really counts. These kinds of list are described in chapter &<>&. -The key for the lookup is given by the context in which the list is expanded. +The key for the lookup is &*implicit*&, +given by the context in which the list is expanded. .endlist String expansions, lists, and lookups interact with each other in such a way @@ -6641,10 +6739,13 @@ file that is searched could contain lines like this: .endd When the lookup succeeds, the result of the expansion is a list of domains (and possibly other types of item that are allowed in domain lists). +.cindex "tainted data" "de-tainting" +The result of the expansion is not tainted. In the second example, the lookup is a single item in a domain list. It causes Exim to use a lookup to see if the domain that is being processed can be found -in the file. The file could contains lines like this: +in the file. +The file could contains lines like this: .code domain1: domain2: @@ -6661,6 +6762,18 @@ If the value of &$sender_host_address$& is 192.168.5.6, expansion of the first &%domains%& setting above generates the second setting, which therefore causes a second lookup to occur. +.new +The lookup type may optionally be followed by a comma +and a comma-separated list of options. +Each option is a &"name=value"& pair. +Whether an option is meaningful depends on the lookup type. + +All lookups support the option &"cache=no_rd"&. +If this is given then the cache that Exim manages for lookup results +is not checked before doing the lookup. +The result of the lookup is still written to the cache. +.wen + The rest of this chapter describes the different lookup types that are available. Any of them can be used in any part of the configuration where a lookup is permitted. @@ -6675,10 +6788,16 @@ Two different types of data lookup are implemented: The &'single-key'& type requires the specification of a file in which to look, and a single key to search for. The key must be a non-empty string for the lookup to succeed. The lookup type determines how the file is searched. -.new .cindex "tainted data" "single-key lookups" The file string may not be tainted -.wen + +.cindex "tainted data" "de-tainting" +All single-key lookups support the option &"ret=key"&. +If this is given and the lookup +(either underlying implementation or cached value) +returns data, the result is replaced with a non-tainted +version of the lookup key. +.cindex "tainted data" "de-tainting" .next .cindex "query-style lookup" "definition of" The &'query-style'& type accepts a generalized database query. No particular @@ -6771,15 +6890,12 @@ by default, but has an option to omit them (see section &<>&). .cindex "lookup" "dsearch" .cindex "dsearch lookup type" &(dsearch)&: The given file must be an -.new absolute -.wen directory path; this is searched for an entry whose name is the key by calling the &[lstat()]& function. The key may not contain any forward slash characters. If &[lstat()]& succeeds then so does the lookup. -.new .cindex "tainted data" "dsearch result" The result is regarded as untainted. @@ -6803,7 +6919,6 @@ ${lookup {passwd} dsearch,filter=file {/etc}} .endd The default matching is for any entry type, including directories and symlinks. -.wen An example of how this lookup can be used to support virtual domains is given in section @@ -6839,6 +6954,13 @@ the implicit key is the host's IP address rather than its name (see section &*Warning 3*&: Do not use an IPv4-mapped IPv6 address for a key; use the IPv4, in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this notation before executing the lookup.) + +.new +One option is supported, "ret=full", to request the return of the entire line +rather than omitting the key porttion. +Note however that the key portion will have been de-quoted. +.wen + .next .cindex lookup json .cindex json "lookup type" @@ -6853,9 +6975,32 @@ If a selector is numeric, it must apply to a JSON array; the (zero-based) nunbered array element is selected. Otherwise it must apply to a JSON object; the named element is selected. The final resulting element can be a simple JSON type or a JSON object -or array; for the latter two a string-representation os the JSON +or array; for the latter two a string-representation of the JSON is returned. For elements of type string, the returned value is de-quoted. + + +.new +.next +.cindex LMDB +.cindex lookup lmdb +.cindex database lmdb +&(lmdb)&: The given file is an LMDB database. +LMDB is a memory-mapped key-value store, +with API modeled loosely on that of BerkeleyDB. +See &url(https://symas.com/products/lightning-memory-mapped-database/) +for the feature set and operation modes. + +Exim provides read-only access via the LMDB C library. +The library can be obtained from &url(https://github.com/LMDB/lmdb) +or your operating system package repository. +To enable LMDB support in Exim set LOOKUP_LMDB=yes in &_Local/Makefile_&. + +You will need to separately create the LMDB database file, +possibly using the &"mdb_load"& utility. +.wen + + .next .cindex "linear search" .cindex "lookup" "lsearch" @@ -6977,9 +7122,10 @@ be followed by optional colons. lookup types support only literal keys. .next +.cindex "spf lookup type" .cindex "lookup" "spf" -If Exim is built with SPF support, manual lookups can be done -(as opposed to the standard ACL condition method. +&(spf)&: If Exim is built with SPF support, manual lookups can be done +(as opposed to the standard ACL condition method). For details see section &<>&. .endlist ilist @@ -7051,11 +7197,7 @@ passed to a Redis database. See section &<>&. .cindex "sqlite lookup type" .cindex "lookup" "sqlite" &(sqlite)&: The format of the query is -new -an optional filename -.wen -followed by an SQL statement -that is passed to an SQLite database. See section &<>&. +an SQL statement that is passed to an SQLite database. See section &<>&. .next &(testdb)&: This is a lookup type that is used for testing Exim. It is @@ -8016,14 +8158,12 @@ The &%quote_redis%& expansion operator escapes whitespace and backslash characters with a backslash. .section "Specifying the server in the query" "SECTspeserque" -.new For MySQL, PostgreSQL and Redis lookups (but not currently for Oracle and InterBase), it is possible to specify a list of servers with an individual query. This is done by appending a comma-separated option to the query type: .display -.endd &`,servers=`&&'server1:server2:server3:...'& -.wen +.endd Each item in the list may take one of two forms: .olist If it contains no slashes it is assumed to be just a host name. The appropriate @@ -8057,8 +8197,7 @@ option, you can still update it by a query of this form: ${lookup pgsql,servers=master/db/name/pw {UPDATE ...} } .endd -.new -An older syntax places the servers speciification before the qury, +An older syntax places the servers specification before the query, semicolon separated: .code ${lookup mysql{servers=master; UPDATE ...} } @@ -8066,7 +8205,6 @@ ${lookup mysql{servers=master; UPDATE ...} } The new version avoids potential issues with tainted arguments in the query, for explicit expansion. &*Note*&: server specifications in list-style lookups are still problematic. -.wen .section "Special MySQL features" "SECID73" @@ -8120,19 +8258,26 @@ daemon as in the other SQL databases. .new .oindex &%sqlite_dbfile%& -The preferred way of specifying the file is by using the -&%sqlite_dbfile%& option, set to -an absolute path. +There are two ways of +specifying the file. +The first is is by using the &%sqlite_dbfile%& main option. +The second, which allows separate files for each query, +is to use an option appended, comma-separated, to the &"sqlite"& +lookup type word. The option is the word &"file"&, then an equals, +then the filename. +The filename in this case cannot contain whitespace or open-brace charachters. .wen + A deprecated method is available, prefixing the query with the filename separated by white space. -This means that the path name cannot contain white space. +This means that .cindex "tainted data" "sqlite file" -It also means that the query cannot use any tainted values, as that taints +the query cannot use any tainted values, as that taints the entire query including the filename - resulting in a refusal to open the file. -.new +In all the above cases the filename must be an absolute path. + Here is a lookup expansion example: .code sqlite_dbfile = /some/thing/sqlitedb @@ -8144,7 +8289,6 @@ In a list, the syntax is similar. For example: domainlist relay_to_domains = sqlite;\ select * from relays where ip='$sender_host_address'; .endd -.wen The only character affected by the &%quote_sqlite%& operator is a single quote, which it doubles. @@ -8334,6 +8478,36 @@ in the previous section. You could also use the &(wildlsearch)& or +.section "Results of list checking" SECTlistresults +The primary result of doing a list check is a truth value. +In some contexts additional information is stored +about the list element that matched: +.vlist +.vitem hosts +A &%hosts%& ACL condition +will store a result in the &$host_data$& variable. +.vitem local_parts +A &%local_parts%& router option or &%local_parts%& ACL condition +will store a result in the &$local_part_data$& variable. +.vitem domains +.new +A &%domains%& router option or &%domains%& ACL condition +will store a result in the &$domain_data$& variable +.wen +.vitem senders +A &%senders%& router option or &%senders%& ACL condition +will store a result in the &$sender_data$& variable. +.vitem recipients +A &%recipients%& ACL condition +will store a result in the &$recipient_data$& variable. +.endlist + +The detail of the additional information depends on the +type of match and is given below as the &*value*& information. + + + + .section "Named lists" "SECTnamedlists" .cindex "named lists" .cindex "list" "named" @@ -8392,7 +8566,6 @@ domainlist dom2 = !a.b : *.b where &'x.y'& does not match. It's best to avoid negation altogether in referenced lists if you can. -.new .cindex "hiding named list values" .cindex "named lists" "hiding value of" Some named list definitions may contain sensitive data, for example, passwords for @@ -8402,7 +8575,6 @@ word &"hide"&. For example: .code hide domainlist filter_for_domains = ldap;PASS=secret ldap::/// ... .endd -.wen Named lists may have a performance advantage. When Exim is routing an @@ -8496,6 +8668,10 @@ If a pattern consists of a single @ character, it matches the local host name, as set by the &%primary_hostname%& option (or defaulted). This makes it possible to use the same configuration file on several different hosts that differ only in their names. + +The value for a match will be the primary host name. + + .next .cindex "@[] in a domain list" .cindex "domain list" "matching local IP interfaces" @@ -8505,7 +8681,12 @@ in square brackets (as in an email address that contains a domain literal), but only if that IP address is recognized as local for email routing purposes. The &%local_interfaces%& and &%extra_local_interfaces%& options can be used to control which of a host's several IP addresses are treated as local. -In today's Internet, the use of domain literals is controversial. +In today's Internet, the use of domain literals is controversial; +see the &%allow_domain_literals%& main option. + +The value for a match will be the string &`@[]`&. + + .next .cindex "@mx_any" .cindex "@mx_primary" @@ -8554,6 +8735,9 @@ involved, it is easiest to change the delimiter for the main list as well: domains = >&) to specify that it is not to be expanded (unless you really do want to build a regular expression by expansion, of course). + +The value for a match will be the list element string (starting with the circumflex). +Additionally, &$0$& will be set to the string matching the regular expression, +and &$1$& (onwards) to any submatches identified by parentheses. + + + .next .cindex "lookup" "in domain list" .cindex "domain list" "matching by lookup" @@ -8593,12 +8788,22 @@ must be a filename in a suitable format for the lookup type. For example, for domains = cdb;/etc/mail/local_domains.cdb .endd The appropriate type of lookup is done on the file using the domain name as the -key. In most cases, the data that is looked up is not used; Exim is interested +key. In most cases, the value resulting from the lookup is not used; Exim is interested only in whether or not the key is present in the file. However, when a lookup is used for the &%domains%& option on a router -or a &%domains%& condition in an ACL statement, the data is preserved in the +or a &%domains%& condition in an ACL statement, the value is preserved in the &$domain_data$& variable and can be referred to in other router options or other statements in the same ACL. +.cindex "tainted data" "de-tainting" +The value will be untainted. + +.new +&*Note*&: If the data result of the lookup (as opposed to the key) +is empty, then this empty value is stored in &$domain_data$&. +The option to return the key for the lookup, as the value, +may be what is wanted. +.wen + .next Any of the single-key lookup type names may be preceded by @@ -8617,6 +8822,7 @@ original lookup fails. This is not a useful feature when using a domain list to select particular domains (because any domain would match), but it might have value if the result of the lookup is being used via the &$domain_data$& expansion variable. + .next If the pattern starts with the name of a query-style lookup type followed by a semicolon (for example, &"nisplus;"& or &"ldap;"&), the remainder of the @@ -8626,25 +8832,40 @@ chapter &<>&. For example: hold_domains = mysql;select domain from holdlist \ where domain = '${quote_mysql:$domain}'; .endd -In most cases, the data that is looked up is not used (so for an SQL query, for +In most cases, the value resulting from the lookup is not used (so for an SQL query, for example, it doesn't matter what field you select). Exim is interested only in whether or not the query succeeds. However, when a lookup is used for the -&%domains%& option on a router, the data is preserved in the &$domain_data$& +&%domains%& option on a router, the value is preserved in the &$domain_data$& variable and can be referred to in other options. +.cindex "tainted data" "de-tainting" +The value will be untainted. + .next -.new If the pattern starts with the name of a lookup type of either kind (single-key or query-style) it may be -followed by a command and options, +followed by a comma and options, The options are lookup-type specific and consist of a comma-separated list. Each item starts with a tag and and equals "=". -.wen + .next .cindex "domain list" "matching literal domain name" If none of the above cases apply, a caseless textual comparison is made between the pattern and the domain. + +The value for a match will be the list element string. +.cindex "tainted data" "de-tainting" +Note that this is commonly untainted +(depending on the way the list was created). +Specifically, explicit text in the configuration file in not tainted. +This is a useful way of obtaining an untainted equivalent to +the domain, for later operations. + +However if the list (including one-element lists) +is created by expanding a variable containing tainted data, +it is tainted and so will the match value be. .endlist + Here is an example that uses several different kinds of pattern: .code domainlist funny_domains = \ @@ -9314,6 +9535,9 @@ become case-sensitive after &"+caseful"& has been seen. .section "Local part lists" "SECTlocparlis" .cindex "list" "local part list" .cindex "local part" "list" +These behave in the same way as domain and host lists, with the following +changes: + Case-sensitivity in local part lists is handled in the same way as for address lists, as just described. The &"+caseful"& item can be used if required. In a setting of the &%local_parts%& option in a router with &%caseful_local_part%& @@ -9358,9 +9582,23 @@ the data type. ACL rules always expand strings. A couple of expansion conditions do not expand some of the brace-delimited branches, for security reasons, .cindex "tainted data" expansion +.cindex "tainted data" definition .cindex expansion "tainted data" and expansion of data deriving from the sender (&"tainted data"&) -is not permitted. +.new +is not permitted (including acessing a file using a tainted name). +.wen + +.new +Common ways of obtaining untainted equivalents of variables with +tainted values +.cindex "tainted data" "de-tainting" +come down to using the tainted value as a lookup key in a trusted database. +This database could be the filesystem structure, +or the password file, +or accessed via a DBMS. +Specific methods are indexed under &"de-tainting"&. +.wen @@ -9507,7 +9745,7 @@ If the ACL returns defer the result is a forced-fail. Otherwise the expansion f .vitem "&*${authresults{*&<&'authserv-id'&>&*}}*&" .cindex authentication "results header" -.cindex headers "authentication-results:" +.chindex Authentication-Results: .cindex authentication "expansion item" This item returns a string suitable for insertion as an &'Authentication-Results:'& @@ -9938,11 +10176,9 @@ newline at the very end. For the &%header%& and &%bheader%& expansion, for those headers that contain lists of addresses, a comma is also inserted at the junctions between headers. This does not happen for the &%rheader%& expansion. -.new -.cindex "tainted data" +.cindex "tainted data" "message headers" When the headers are from an incoming message, the result of expanding any of these variables is tainted. -.wen .vitem &*${hmac{*&<&'hashname'&>&*}{*&<&'secret'&>&*}{*&<&'string'&>&*}}*& @@ -10075,12 +10311,21 @@ extracted is used. You can use &`fail`& instead of {<&'string3'&>} as in a string extract. -.vitem "&*${lookup{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&& - {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&" -This is the first of one of two different types of lookup item, which are both -described in the next item. +.new +.vitem &*${listquote{*&<&'separator'&>&*}{*&<&'string'&>&*}}*& +.cindex quoting "for list" +.cindex list quoting +This item doubles any occurrence of the separator character +in the given string. +An empty string is replaced with a single space. +This converts the string into a safe form for use as a list element, +in a list using the given separator. +.wen + -.vitem "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&& +.vitem "&*${lookup&~{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&& + {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&" &&& + "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&& {*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&" .cindex "expansion" "lookup in" .cindex "file" "lookups" @@ -10292,7 +10537,6 @@ Example: ${readsocket{/socket/name}{request string}{3s:shutdown=no}} .endd -.new The following option names are recognised: .ilist &*cache*& @@ -10314,7 +10558,6 @@ Controls the use of TLS on the connection. Values are &"yes"& or &"no"& (the default). If it is enabled, a shutdown as descripbed above is never done. .endlist -.wen A fourth argument allows you to change any newlines that are in the data @@ -10516,6 +10759,14 @@ ${sort {${lookup dnsdb{>:,,mx=example.com}}} {<} {${listextract{1}{<,$item}}}} will sort an MX lookup into priority order. + +.new +.vitem &*${srs_encode&~{*&<&'secret'&>&*}{*&<&'return&~path'&>&*}{*&<&'original&~domain'&>&*}}*& +SRS encoding. See SECT &<>& for details. +.wen + + + .vitem &*${substr{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*& .cindex "&%substr%& expansion item" .cindex "substring extraction" @@ -10790,8 +11041,7 @@ a decimal representation of the answer (without &"K"&, &"M"& or &"G"&). For exam As a more realistic example, in an ACL you might have .code -deny message = Too many bad recipients - condition = \ +deny condition = \ ${if and { \ {>{$rcpt_count}{10}} \ { \ @@ -10800,6 +11050,7 @@ deny message = Too many bad recipients {${eval:$rcpt_count/2}} \ } \ }{yes}{no}} + message = Too many bad recipients .endd The condition is true if there have been more than 10 RCPT commands and fewer than half of them have resulted in a valid recipient. @@ -10932,6 +11183,10 @@ If the optional type is given it must be one of "a", "d", "h" or "l" and selects address-, domain-, host- or localpart- lists to search among respectively. Otherwise all types are searched in an undefined order and the first matching list is returned. +.new +&*Note*&: Neither string-expansion of lists referenced by named-list syntax elements, +nor expansion of lookup elements, is done by the &%listnamed%& operator. +.wen .vitem &*${local_part:*&<&'string'&>&*}*& @@ -11494,6 +11749,12 @@ condition is true if the named file (or directory) exists. The existence test is done by calling the &[stat()]& function. The use of the &%exists%& test in users' filter files may be locked out by the system administrator. +.new +&*Note:*& Testing a path using this condition is not a sufficient way of +de-tainting it. +Consider using a dsearch lookup. +.wen + .vitem &*first_delivery*& .cindex "delivery" "first" .cindex "first delivery" @@ -11578,6 +11839,13 @@ includes the case of letters, whereas for &%gti%& the comparison is case-independent. Case and collation order are defined per the system C locale. + +.new +.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*& +SRS decode. See SECT &<>& for details. +.wen + + .vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&& &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& .cindex "string" "comparison" @@ -11827,15 +12095,12 @@ request, for a password, so the data consists of just two strings. There can be problems if any of the strings are permitted to contain colon characters. In the usual way, these have to be doubled to avoid being taken as -separators. If the data is being inserted from a variable, the &%sg%& expansion -item can be used to double any existing colons. For example, the configuration +separators. +The &%listquote%& expansion item can be used for this. +For example, the configuration of a LOGIN authenticator might contain this setting: .code -server_condition = ${if pam{$auth1:${sg{$auth2}{:}{::}}}} -.endd -For a PLAIN authenticator you could use: -.code -server_condition = ${if pam{$auth2:${sg{$auth3}{:}{::}}}} +server_condition = ${if pam{$auth1:${listquote{:}{$auth2}}}} .endd In some operating systems, PAM authentication can be done only from a process running as root. Since Exim is running as the Exim user when receiving @@ -12093,7 +12358,7 @@ to the relevant file. When, as a result of aliasing or forwarding, a message is directed to a pipe, this variable holds the pipe command when the transport is running. -.vitem "&$auth1$& &-- &$auth3$&" +.vitem "&$auth1$& &-- &$auth4$&" .vindex "&$auth1$&, &$auth2$&, etc" These variables are used in SMTP authenticators (see chapters &<>&&--&<>&). Elsewhere, they are empty. @@ -12230,13 +12495,6 @@ contain the trailing slash. If &$config_file$& does not contain a slash, .vindex "&$config_file$&" The name of the main configuration file Exim is using. -.vitem &$dmarc_domain_policy$& &&& - &$dmarc_status$& &&& - &$dmarc_status_text$& &&& - &$dmarc_used_domains$& -Results of DMARC verification. -For details see section &<>&. - .vitem &$dkim_verify_status$& Results of DKIM verification. For details see section &<>&. @@ -12269,6 +12527,13 @@ When a message has been received this variable contains a colon-separated list of signer domains and identities for the message. For details see section &<>&. +.vitem &$dmarc_domain_policy$& &&& + &$dmarc_status$& &&& + &$dmarc_status_text$& &&& + &$dmarc_used_domains$& +Results of DMARC verification. +For details see section &<>&. + .vitem &$dnslist_domain$& &&& &$dnslist_matched$& &&& &$dnslist_text$& &&& @@ -12337,29 +12602,34 @@ When the &%smtp_etrn_command%& option is being expanded, &$domain$& contains the complete argument of the ETRN command (see section &<>&). .endlist -.new .cindex "tainted data" If the origin of the data is an incoming message, -the result of expanding this variable is tainted. -When un untainted version is needed, one should be obtained from +the result of expanding this variable is tainted and may not +be further expanded or used as a filename. +When an untainted version is needed, one should be obtained from looking up the value in a local (therefore trusted) database. Often &$domain_data$& is usable in this role. -.wen .vitem &$domain_data$& .vindex "&$domain_data$&" -When the &%domains%& option on a router matches a domain by -means of a lookup, the data read by the lookup is available during the running -of the router as &$domain_data$&. In addition, if the driver routes the +When the &%domains%& condition on a router +.new +or an ACL +matches a domain +against a list, the match value is copied to &$domain_data$&. +This is an enhancement over previous versions of Exim, when it only +applied to the data read by a lookup. +For details on match values see section &<>& et. al. +.wen + +If the router routes the address to a transport, the value is available in that transport. If the transport is handling multiple addresses, the value from the first address is used. -&$domain_data$& is also set when the &%domains%& condition in an ACL matches a -domain by means of a lookup. The data read by the lookup is available during -the rest of the ACL statement. In all other situations, this variable expands -to nothing. +&$domain_data$& set in an ACL is available during +the rest of the ACL statement. .vitem &$exim_gid$& .vindex "&$exim_gid$&" @@ -12440,7 +12710,7 @@ result of the lookup is made available in the &$host_data$& variable. This allows you, for example, to do things like this: .code deny hosts = net-lsearch;/some/file -message = $host_data + message = $host_data .endd .vitem &$host_lookup_deferred$& .cindex "host name" "lookup, failure of" @@ -12539,10 +12809,10 @@ Global address rewriting happens when a message is received, so the value of because a message may have many recipients and the system filter is called just once. -.new .cindex "tainted data" If the origin of the data is an incoming message, -the result of expanding this variable is tainted. +the result of expanding this variable is tainted and +may not be further expanded or used as a filename. &*Warning*&: the content of this variable is usually provided by a potential attacker. @@ -12550,14 +12820,13 @@ Consider carefully the implications of using it unvalidated as a name for file access. This presents issues for users' &_.forward_& and filter files. For traditional full user accounts, use &%check_local_users%& and the -&$local_part_verified$& variable rather than this one. +&$local_part_data$& variable rather than this one. For virtual users, store a suitable pathname component in the database which is used for account name validation, and use that retrieved value rather than this variable. Often &$local_part_data$& is usable in this role. If needed, use a router &%address_data%& or &%set%& option for the retrieved data. -.wen When a message is being delivered to a file, pipe, or autoreply transport as a result of aliasing or forwarding, &$local_part$& is set to the local part of @@ -12593,16 +12862,16 @@ to process local parts in a case-dependent manner in a router, you can set the .vitem &$local_part_data$& .vindex "&$local_part_data$&" -When the &%local_parts%& option on a router matches a local part by means of a -lookup, the data read by the lookup is available during the running of the -router as &$local_part_data$&. In addition, if the driver routes the address -to a transport, the value is available in that transport. If the transport is -handling multiple addresses, the value from the first address is used. +When the &%local_parts%& condition on a router or ACL +matches a local part list +.new +the match value is copied to &$local_part_data$&. +This is an enhancement over previous versions of Exim, when it only +applied to the data read by a lookup. +For details on match values see section &<>& et. al. +.wen -&$local_part_data$& is also set when the &%local_parts%& condition in an ACL -matches a local part by means of a lookup. The data read by the lookup is -available during the rest of the ACL statement. In all other situations, this -variable expands to nothing. +The &%check_local_user%& router option also sets this variable. .vindex &$local_part_prefix$& &&& &$local_part_prefix_v$& &&& @@ -12613,7 +12882,6 @@ If a local part prefix or suffix has been recognized, it is not included in the value of &$local_part$& during routing and subsequent delivery. The values of any prefix or suffix are in &$local_part_prefix$& and &$local_part_suffix$&, respectively. -.new .cindex "tainted data" If the specification did not include a wildcard then the affix variable value is not tainted. @@ -12622,7 +12890,6 @@ If the affix specification included a wildcard then the portion of the affix matched by the wildcard is in &$local_part_prefix_v$& or &$local_part_suffix_v$& as appropriate, and both the whole and varying values are tainted. -.wen .vitem &$local_scan_data$& .vindex "&$local_scan_data$&" @@ -12788,9 +13055,9 @@ header and the body). Here is an example of the use of this variable in a DATA ACL: .code -deny message = Too many lines in message header - condition = \ +deny condition = \ ${if <{250}{${eval:$message_linecount - $body_linecount}}} + message = Too many lines in message header .endd In the MAIL and RCPT ACLs, the value is zero because at that stage the message has not yet been received. @@ -12964,6 +13231,8 @@ The name of the spool queue in use; empty for the default queue. .cindex "spool" "number of messages" This variable contains the number of messages queued. It is evaluated on demand, but no more often than once every minute. +If there is no daemon notifier socket open, the value will be +an empty string. .vitem &$r_...$& .vindex &$r_...$& @@ -13279,7 +13548,6 @@ library, by setting: dns_dnssec_ok = 1 .endd -.new In addition, on Linux with glibc 2.31 or newer the resolver library will default to stripping out a successful validation status. This will break a previously working Exim installation. @@ -13289,7 +13557,6 @@ glibc to pass through any successful validation with a new option in .code options trust-ad .endd -.wen Exim does not perform DNSSEC validation itself, instead leaving that to a validating resolver (e.g. unbound, or bind with suitable configuration). @@ -13470,7 +13737,11 @@ filter file to set values that can be tested in users' filter files. For example, a system filter could set a value indicating how likely it is that a message is junk mail. -.vitem &$spam_$&&'xxx'& +.vitem &$spam_score$& &&& + &$spam_score_int$& &&& + &$spam_bar$& &&& + &$spam_report$& &&& + &$spam_action$& A number of variables whose names start with &$spam$& are available when Exim is compiled with the content-scanning extension. For details, see section &<>&. @@ -13666,10 +13937,23 @@ the value of the Distinguished Name of the certificate is made available in the If certificate verification fails it may refer to a failing chain element which is not the leaf. + +.new +.vitem &$tls_in_resumption$& &&& + &$tls_out_resumption$& +.vindex &$tls_in_resumption$& +.vindex &$tls_out_resumption$& +.cindex TLS resumption +Observability for TLS session resumption. See &<>& for details. +.wen + + .vitem &$tls_in_sni$& .vindex "&$tls_in_sni$&" .vindex "&$tls_sni$&" .cindex "TLS" "Server Name Indication" +.cindex "TLS" SNI +.cindex SNI "observability on server" When a TLS session is being established, if the client sends the Server Name Indication extension, the value will be placed in this variable. If the variable appears in &%tls_certificate%& then this option and @@ -13685,6 +13969,8 @@ the outbound. .vitem &$tls_out_sni$& .vindex "&$tls_out_sni$&" .cindex "TLS" "Server Name Indication" +.cindex "TLS" SNI +.cindex SNI "observability in client" During outbound SMTP deliveries, this variable reflects the value of the &%tls_sni%& option on the transport. @@ -13845,6 +14131,10 @@ taint mode of the Perl interpreter. You are encouraged to set this option to a true value. To avoid breaking existing installations, it defaults to false. +.new +&*Note*&: This is entirely separate from Exim's tainted-data tracking. +.wen + .section "Calling Perl subroutines" "SECID86" When the configuration file includes a &%perl_startup%& option you can make use @@ -14279,9 +14569,11 @@ listed in more than one group. .section "Miscellaneous" "SECID96" .table2 +.row &%add_environment%& "environment variables" .row &%bi_command%& "to run for &%-bi%& command line option" .row &%debug_store%& "do extra internal checks" .row &%disable_ipv6%& "do no IPv6 processing" +.row &%keep_environment%& "environment variables" .row &%keep_malformed%& "for broken files &-- should not happen" .row &%localhost_number%& "for unique message ids in clusters" .row &%message_body_newlines%& "retain newlines in &$message_body$&" @@ -14477,8 +14769,10 @@ listed in more than one group. .row &%local_scan_timeout%& "timeout for &[local_scan()]&" .row &%message_size_limit%& "for all messages" .row &%percent_hack_domains%& "recognize %-hack for these domains" +.row &%proxy_protocol_timeout%& "timeout for proxy protocol negotiation" .row &%spamd_address%& "set interface to SpamAssassin" .row &%strict_acl_vars%& "object to unset ACL variables" +.row &%spf_smtp_comment_template%& "template for &$spf_smtp_comment$&" .endtable @@ -14565,6 +14859,9 @@ See also the &'Policy controls'& section above. .row &%dkim_verify_keytypes%& "DKIM key types accepted for signatures" .row &%dkim_verify_min_keysizes%& "DKIM key sizes accepted for signatures" .row &%dkim_verify_signers%& "DKIM domains for which DKIM ACL is run" +.row &%dmarc_forensic_sender%& "DMARC sender for report messages" +.row &%dmarc_history_file%& "DMARC results log" +.row &%dmarc_tld_file%& "DMARC toplevel domains file" .row &%host_lookup%& "host name looked up for these hosts" .row &%host_lookup_order%& "order of DNS and local name lookups" .row &%recipient_unqualified_hosts%& "may send unqualified recipients" @@ -14666,6 +14963,7 @@ See also the &'Policy controls'& section above. .row &%hold_domains%& "hold delivery for these domains" .row &%local_interfaces%& "for routing checks" .row &%queue_domains%& "no immediate delivery for these" +.row &%queue_fast_ramp%& "parallel delivery with 2-phase queue run" .row &%queue_only%& "no immediate delivery at all" .row &%queue_only_file%& "no immediate delivery if file exists" .row &%queue_only_load%& "no immediate delivery if load is high" @@ -14712,6 +15010,7 @@ Those options that undergo string expansion before use are marked with .cindex "8-bit characters" .cindex "log" "selectors" .cindex "log" "8BITMIME" +.cindex "ESMTP extensions" 8BITMIME This option causes Exim to send 8BITMIME in its response to an SMTP EHLO command, and to accept the BODY= parameter on MAIL commands. However, though Exim is 8-bit clean, it is not a protocol converter, and it @@ -14925,6 +15224,7 @@ That is, set the option to an empty string so that no check is done. .option auth_advertise_hosts main "host list&!!" * .cindex "authentication" "advertising" .cindex "AUTH" "advertising" +.cindex "ESMTP extensions" AUTH If any server authentication mechanisms are configured, Exim advertises them in response to an EHLO command only if the calling host matches this list. Otherwise, Exim does not advertise AUTH. @@ -14992,11 +15292,9 @@ required, it must come from the &%-oA%& command line option. This option defines a template file containing paragraphs of text to be used for constructing bounce messages. Details of the file's contents are given in chapter &<>&. -.new .cindex bounce_message_file "tainted data" The option is expanded to give the file path, which must be absolute and untainted. -.wen See also &%warn_message_file%&. @@ -15186,6 +15484,7 @@ may wish to deliberately disable them. .option chunking_advertise_hosts main "host list&!!" * .cindex CHUNKING advertisement .cindex "RFC 3030" "CHUNKING" +.cindex "ESMTP extensions" CHUNKING The CHUNKING extension (RFC3030) will be advertised in the EHLO message to these hosts. Hosts may use the BDAT command as an alternate to DATA. @@ -15322,11 +15621,9 @@ etc. are ignored. If IP literals are enabled, the &(ipliteral)& router declines to handle IPv6 literal addresses. -.new .option dkim_verify_hashes main "string list" "sha256 : sha512" .cindex DKIM "selecting signature algorithms" This option gives a list of hash types which are acceptable in signatures, -.wen and an order of processing. Signatures with algorithms not in the list will be ignored. @@ -15345,14 +15642,12 @@ and an order of processing. Signatures with algorithms not in the list will be ignored. -.new .option dkim_verify_min_keysizes main "string list" "rsa=1024 ed25519=250" This option gives a list of key sizes which are acceptable in signatures. The list is keyed by the algorithm type for the key; the values are in bits. Signatures with keys smaller than given by this option will fail verification. The default enforces the RFC 8301 minimum key size for RSA signatures. -.wen .option dkim_verify_minimal main boolean false If set to true, verification of signatures will terminate after the @@ -15366,6 +15661,14 @@ the ACL once for each signature in the message. See section &<>&. +.option dmarc_forensic_sender main string&!! unset +.option dmarc_history_file main string unset +.option dmarc_tld_file main string unset +.cindex DMARC "main section options" +These options control DMARC processing. +See section &<>& for details. + + .option dns_again_means_nonexist main "domain list&!!" unset .cindex "DNS" "&""try again""& response; overriding" DNS lookups give a &"try again"& response for the DNS errors @@ -15436,7 +15739,6 @@ default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on. If the resolver library does not support DNSSEC then this option has no effect. -.new On Linux with glibc 2.31 or newer this is insufficient, the resolver library will default to stripping out a successful validation status. This will break a previously working Exim installation. @@ -15446,7 +15748,6 @@ glibc to pass through any successful validation with a new option in .code options trust-ad .endd -.wen .option dns_ipv4_lookup main "domain list&!!" unset @@ -15537,6 +15838,7 @@ described in section &<>&. .cindex "bounce messages" "success" .cindex "DSN" "success" .cindex "Delivery Status Notification" "success" +.cindex "ESMTP extensions" DSN DSN extensions (RFC3461) will be advertised in the EHLO message to, and accepted from, these hosts. Hosts may use the NOTIFY and ENVID options on RCPT TO commands, @@ -15544,6 +15846,8 @@ and RET and ORCPT options on MAIL FROM commands. A NOTIFY=SUCCESS option requests success-DSN messages. A NOTIFY= option with no argument requests that no delay or failure DSNs are sent. +&*Note*&: Supplying success-DSN messages has been criticised +on privacy grounds; it can leak details of internal forwarding. .option dsn_from main "string&!!" "see below" .cindex "&'From:'& header line" "in bounces" @@ -16425,6 +16729,11 @@ to depend on the IP address of the remote host for messages arriving via TCP/IP. After expansion, the value must be a sequence of decimal digits, optionally followed by K or M. +.cindex "SIZE" "ESMTP extension, advertising" +.cindex "ESMTP extensions" SIZE +If nonzero the value will be advertised as a parameter to the ESMTP SIZE +service extension keyword. + &*Note*&: This limit cannot be made to depend on a message's sender or any other properties of an individual message, because it has to be advertised in the server's response to EHLO. String expansion failure causes a temporary @@ -16502,7 +16811,6 @@ harm. This option overrides the &%pipe_as_creator%& option of the &(pipe)& transport driver. -.new .option notifier_socket main string "$spool_directory/exim_daemon_notify" This option gives the name for a unix-domain socket on which the daemon listens for work and information-requests. @@ -16512,12 +16820,17 @@ should need to modify the default. The option is expanded before use. If the platform supports Linux-style abstract socket names, the result is used with a nul byte prefixed. -Otherwise, it should be a full path name and use a directory accessible +Otherwise, +.new "if nonempty," +it should be a full path name and use a directory accessible to Exim. -If the Exim command line uses a &%-oX%& option and does not use &%-oP%& -then a notifier socket is not created. +.new +If this option is set as empty, +or the command line &%-oY%& option is used, or .wen +the command line uses a &%-oX%& option and does not use &%-oP%&, +then a notifier socket is not created. .option openssl_options main "string list" "+no_sslv2 +no_sslv3 +single_dh_use +no_ticket +no_renegotiation" @@ -16692,6 +17005,7 @@ of the &%-oX%& option, unless a path is explicitly supplied by &%-oP%&. .option pipelining_advertise_hosts main "host list&!!" * .cindex "PIPELINING" "suppressing advertising" +.cindex "ESMTP extensions" PIPELINING This option can be used to suppress the advertisement of the SMTP PIPELINING extension to specific hosts. See also the &*no_pipelining*& control in section &<>&. When PIPELINING is not advertised and @@ -16703,6 +17017,7 @@ not count as protocol errors (see &%smtp_max_synprot_errors%&). .option pipelining_connect_advertise_hosts main "host list&!!" * .cindex "pipelining" "early connection" .cindex "pipelining" PIPE_CONNECT +.cindex "ESMTP extensions" PIPE_CONNECT If Exim is built with the SUPPORT_PIPE_CONNECT build option this option controls which hosts the facility is advertised to and from which pipeline early-connection (before MAIL) SMTP @@ -16711,11 +17026,14 @@ When used, the pipelining saves on roundtrip times. See also the &%hosts_pipe_connect%& smtp transport option. -Currently the option name &"X_PIPE_CONNECT"& is used. +.new +The SMTP service extension keyword advertised is &"PIPE_CONNECT"&. +.wen .option prdr_enable main boolean false .cindex "PRDR" "enabling on server" +.cindex "ESMTP extensions" PRDR This option can be used to enable the Per-Recipient Data Response extension to SMTP, defined by Eric Hall. If the option is set, PRDR is advertised by Exim when operating as a server. @@ -16791,6 +17109,14 @@ admin user unless &%prod_requires_admin%& is set false. See also &%queue_list_requires_admin%& and &%commandline_checks_require_admin%&. +.new +.option proxy_protocol_timeout main time 3s +.cindex proxy "proxy protocol" +This option sets the timeout for proxy protocol negotiation. +For details see section &<>&. +.wen + + .option qualify_domain main string "see below" .cindex "domain" "for qualifying addresses" .cindex "address" "qualification" @@ -16826,6 +17152,17 @@ domains that do not match are processed. All other deliveries wait until the next queue run. See also &%hold_domains%& and &%queue_smtp_domains%&. +.new +.option queue_fast_ramp main boolean false +.cindex "queue runner" "two phase" +.cindex "queue" "double scanning" +If set to true, two-phase queue runs, initiated using &%-qq%& on the +command line, may start parallel delivery processes during their first +phase. This will be done when a threshold number of messages have been +routed for a single host. +.wen + + .option queue_list_requires_admin main boolean true .cindex "restricting access to features" .oindex "&%-bp%&" @@ -17082,6 +17419,9 @@ manager, there is no way of controlling the total number of simultaneous deliveries if the configuration allows a delivery attempt as soon as a message is received. +See also the &%max_parallel%& generic transport option, +and the &%serialize_hosts%& smtp transport option. + .cindex "number of deliveries" .cindex "delivery" "maximum number of" If you want to control the total number of deliveries on the system, you @@ -17250,7 +17590,7 @@ live with. . searchable. NM changed this occurrence for bug 1197 to no longer allow . the option name to split. -.option "smtp_accept_max_per_connection" main integer 1000 &&& +.option "smtp_accept_max_per_connection" main integer&!! 1000 &&& smtp_accept_max_per_connection .cindex "SMTP" "limiting incoming message count" .cindex "limit" "messages per SMTP connection" @@ -17260,6 +17600,11 @@ results in the transfer of a message. After the limit is reached, a 421 response is given to subsequent MAIL commands. This limit is a safety precaution against a client that goes mad (incidents of this type have been seen). +.new +The option is expanded after the HELO or EHLO is received +and may depend on values available at that time. +An empty or zero value after expansion removes the limit. +.wen .option smtp_accept_max_per_host main string&!! unset @@ -17435,6 +17780,7 @@ hosts), you can do so by an appropriate use of a &%control%& modifier in an ACL .option smtp_etrn_command main string&!! unset .cindex "ETRN" "command to be run" +.cindex "ESMTP extensions" ETRN .vindex "&$domain$&" If this option is set, the given command is run whenever an SMTP ETRN command is received from a host that is permitted to issue such commands (see @@ -17446,12 +17792,10 @@ example: smtp_etrn_command = /etc/etrn_command $domain \ $sender_host_address .endd -.new If the option is not set, the argument for the ETRN command must be a &'#'& followed by an address string. In this case an &'exim -R '& command is used; if the ETRN ACL has set up a named-queue then &'-MCG '& is appended. -.wen A new process is created to run the command, but Exim does not wait for it to complete. Consequently, its status cannot be checked. If the command cannot be @@ -17615,7 +17959,8 @@ example, instead of &"Administrative prohibition"&, it might give: .option smtputf8_advertise_hosts main "host list&!!" * -.cindex "SMTPUTF8" "advertising" +.cindex "SMTPUTF8" "ESMTP extension, advertising" +.cindex "ESMTP extensions" SMTPUTF8 When Exim is built with support for internationalised mail names, the availability thereof is advertised in response to EHLO only to those client hosts that match this option. See @@ -17633,6 +17978,46 @@ See section &<>& for more details. This option is available when Exim is compiled with SPF support. See section &<>& for more details. +.option spf_smtp_comment_template main string&!! "Please%_see%_http://www.open-spf.org/Why" +This option is available when Exim is compiled with SPF support. It +allows the customisation of the SMTP comment that the SPF library +generates. You are strongly encouraged to link to your own explanative +site. The template must not contain spaces. If you need spaces in the +output, use the proper placeholder. If libspf2 can not parse the +template, it uses a built-in default broken link. The following placeholders +(along with Exim variables (but see below)) are allowed in the template: +.ilist +&*%_*&: A space. +.next +&*%{L}*&: Envelope sender's local part. +.next +&*%{S}*&: Envelope sender. +.next +&*%{O}*&: Envelope sender's domain. +.next +&*%{D}*&: Current(?) domain. +.next +&*%{I}*&: SMTP client Ip. +.next +&*%{C}*&: SMTP client pretty IP. +.next +&*%{T}*&: Epoch time (UTC). +.next +&*%{P}*&: SMTP client domain name. +.next +&*%{V}*&: IP version. +.next +&*%{H}*&: EHLO/HELO domain. +.next +&*%{R}*&: Receiving domain. +.endlist +The capitalized placeholders do proper URL encoding, if you use them +lowercased, no encoding takes place. This list was compiled from the +libspf2 sources. + +A note on using Exim variables: As +currently the SPF library is initialized before the SMTP EHLO phase, +the variables useful for expansion are quite limited. .option split_spool_directory main boolean false @@ -17784,6 +18169,7 @@ syslog. The value must be no longer than 32 characters. See chapter .option syslog_timestamp main boolean true .cindex "syslog" "timestamps" +.cindex timestamps syslog If &%syslog_timestamp%& is set false, the timestamps on Exim's log lines are omitted when these lines are sent to syslog. See chapter &<>& for details of Exim's logging. @@ -17906,6 +18292,7 @@ unfortunately not all, operating systems. .cindex "TLS" "advertising" .cindex "encryption" "on SMTP connection" .cindex "SMTP" "encrypted connection" +.cindex "ESMTP extensions" STARTTLS When Exim is built with support for TLS encrypted connections, the availability of the STARTTLS command to set up an encrypted session is advertised in response to EHLO only to those client hosts that match this option. See @@ -17938,6 +18325,7 @@ when a list of more than one file is used, the &$tls_in_ourcert$& variable is unreliable. The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions. +.cindex SNI "selecting server certificate based on" If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then if the OpenSSL build supports TLS extensions and the TLS client sends the Server Name Indication extension, then this option and others documented in @@ -18155,6 +18543,14 @@ preference order of the available ciphers. Details are given in sections &<>& and &<>&. +.new +.option tls_resumption_hosts main "host list&!!" unset +.cindex TLS resumption +This option controls which connections to offer the TLS resumption feature. +See &<>& for details. +.wen + + .option tls_try_verify_hosts main "host list&!!" unset .cindex "TLS" "client certificate verification" .cindex "certificate" "verification of client" @@ -18189,7 +18585,9 @@ than the public cert of individual clients. With both OpenSSL and GnuTLS, if the value is a file then the certificates are sent by Exim as a server to connecting clients, defining the list of accepted certificate authorities. Thus the values defined should be considered public data. To avoid this, -use the explicit directory version. +use the explicit directory version. (If your peer is Exim up to 4.85, +using GnuTLS, you may need to send the CAs (thus using the file +variant). Otherwise the peer doesn't send its certificate.) See &<>& for discussion of when this option might be re-expanded. @@ -18351,11 +18749,9 @@ for constructing the warning message which is sent by Exim when a message has been in the queue for a specified amount of time, as specified by &%delay_warning%&. Details of the file's contents are given in chapter &<>&. -.new .cindex warn_message_file "tainted data" The option is expanded to give the file path, which must be absolute and untainted. -.wen See also &%bounce_message_file%&. @@ -18510,7 +18906,10 @@ address (with affixes removed if relevant) is the name of an account on the local system. The check is done by calling the &[getpwnam()]& function rather than trying to read &_/etc/passwd_& directly. This means that other methods of holding password data (such as NIS) are supported. If the local part is a local -user, &$home$& is set from the password data, and can be tested in other +user, +.cindex "tainted data" "de-tainting" +&$local_part_data$& is set to an untainted version of the local part and +&$home$& is set from the password data. The latter can be tested in other preconditions that are evaluated after this one (the order of evaluation is given in section &<>&). However, the value of &$home$& can be overridden by &%router_home_directory%&. If the local part is not a local user, @@ -18637,7 +19036,7 @@ transport option of the same name. .cindex "security" "MX lookup" .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_request_domains%& will be done with -the dnssec request bit set. +the DNSSEC request bit set. This applies to all of the SRV, MX, AAAA, A lookup sequence. .option dnssec_require_domains routers "domain list&!!" unset @@ -18646,7 +19045,7 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence. .cindex "security" "MX lookup" .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_require_domains%& will be done with -the dnssec request bit set. Any returns not having the Authenticated Data bit +the DNSSEC request bit set. Any returns not having the Authenticated Data bit (AD bit) set will be ignored and logged as a host-lookup failure. This applies to all of the SRV, MX, AAAA, A lookup sequence. @@ -18657,7 +19056,8 @@ This applies to all of the SRV, MX, AAAA, A lookup sequence. If this option is set, the router is skipped unless the current domain matches the list. If the match is achieved by means of a file lookup, the data that the lookup returned for the domain is placed in &$domain_data$& for use in string -expansions of the driver's private options. See section &<>& for +expansions of the driver's private options and in the transport. +See section &<>& for a list of the order in which preconditions are evaluated. @@ -18841,9 +19241,7 @@ colon-separated (by default, changeable in the usual way &<>& that is associated with any addresses that are accepted by the router. However, the option has no effect when an address is just being verified. Each list item is separately expanded, at transport time. -.new If an item ends in *, it will match any header with the given prefix. -.wen The way in which the text is used to remove header lines at transport time is described in section &<>&. Header lines are not actually removed until @@ -18956,11 +19354,9 @@ command for LMTP, SMTP, and BSMTP deliveries has the prefix removed by default. This behaviour can be overridden by setting &%rcpt_include_affixes%& true on the relevant transport. -.new .vindex &$local_part_prefix_v$& If wildcarding (above) was used then the part of the prefix matching the wildcard is available in &$local_part_prefix_v$&. -.wen When an address is being verified, &%local_part_prefix%& affects only the behaviour of the router. If the callout feature of verification is in use, this @@ -19024,12 +19420,13 @@ section &<>& for a discussion of local part lists. Because the string is expanded, it is possible to make it depend on the domain, for example: .code -local_parts = dbm;/usr/local/specials/$domain +local_parts = dbm;/usr/local/specials/$domain_data .endd .vindex "&$local_part_data$&" If the match is achieved by a lookup, the data that the lookup returned for the local part is placed in the variable &$local_part_data$& for use in -expansions of the router's private options. You might use this option, for +expansions of the router's private options or in the transport. +You might use this option, for example, if you have a large number of local virtual domains, and you want to send all postmaster mail to the same place without having to set up an alias in each virtual domain: @@ -19167,7 +19564,7 @@ but the user is specified symbolically, the gid associated with the uid is used. For example: .code require_files = mail:/some/file -require_files = $local_part_verified:$home/.procmailrc +require_files = $local_part_data:$home/.procmailrc .endd If a user or group name in a &%require_files%& list does not exist, the &%require_files%& condition fails. @@ -19374,6 +19771,10 @@ Values containing a list-separator should have them doubled. When a router runs, the strings are evaluated in order, to create variables which are added to the set associated with the address. +.new +This is done immediately after all the preconditions, before the +evaluation of the &%address_data%& option. +.wen The variable is set with the expansion of the value. The variables can be used by the router options (not including any preconditions) @@ -20795,7 +21196,6 @@ is not the case when the file contains syntactically valid items that happen to yield empty addresses, for example, items containing only RFC 2822 address comments. -.new .cindex "tainted data" "in filenames" .cindex redirect "tainted data" Tainted data may not be used for a filename. @@ -20806,7 +21206,6 @@ as they are provided by a potential attacker. In the examples above, &$local_part$& is used for looking up data held locally on the system, and not used directly (the second example derives &$home$& via the passsword file or database, using &$local_part$&). -.wen @@ -21033,11 +21432,9 @@ It must be given as .code list1: :include:/opt/lists/list1 .endd -.new .cindex "tainted data" "in filenames" .cindex redirect "tainted data" Tainted data may not be used for a filename. -.wen .next .cindex "address redirection" "to black hole" .cindex "delivery" "discard" @@ -21798,7 +22195,7 @@ local_users: # This transport overrides the group group_delivery: driver = appendfile - file = /var/spool/mail/$local_part_verified + file = /var/spool/mail/$local_part_data group = mail .endd If &%user%& is set for a transport, its value overrides what is set in the @@ -22046,9 +22443,7 @@ Each list item is separately expanded. If the result of the expansion is an empty string, or if the expansion is forced to fail, no action is taken. Other expansion failures are treated as errors and cause the delivery to be deferred. -.new If an item ends in *, it will match any header with the given prefix. -.wen Matching headers are omitted from the message as it is transported, as described in section &<>&. Header removal can also be specified by @@ -22227,7 +22622,7 @@ This defaults to the incoming sender address, but can be changed by setting .option return_path_add transports boolean false -.cindex "&'Return-path:'& header line" +.chindex Return-path: If this option is true, a &'Return-path:'& header is added to the message. Although the return path is normally available in the prefix line of BSD mailboxes, this is commonly not displayed by MUAs, and so the user does not @@ -22313,7 +22708,7 @@ message. For example, a content scan could insert a new header line containing a spam score. This could be interpreted by a filter in the user's MUA. It is not possible to discard a message at this stage. -.cindex "SMTP" "SIZE" +.cindex "SIZE" "ESMTP extension" A problem might arise if the filter increases the size of a message that is being sent down an SMTP connection. If the receiving SMTP server has indicated support for the SIZE parameter, Exim will have sent the size of the message @@ -22603,14 +22998,12 @@ If &%file%& or &%directory%& is set for a delivery from a redirection, it is used to determine the file or directory name for the delivery. Normally, the contents of &$address_file$& are used in some way in the string expansion. .endlist -.new .cindex "tainted data" "in filenames" .cindex appendfile "tainted data" Tainted data may not be used for a file or directory name. This means that, for instance, &$local_part$& cannot be used directly as a component of a path. It can however be used as the key for a lookup which returns a path (or component). -.wen .cindex "Sieve filter" "configuring &(appendfile)&" @@ -22633,7 +23026,7 @@ is used as a result of a &"keep"& action in the filter. This example shows one way of handling this requirement: .code file = ${if eq{$address_file}{inbox} \ - {/var/mail/$local_part_verified} \ + {/var/mail/$local_part_data} \ {${if eq{${substr_0_1:$address_file}}{/} \ {$address_file} \ {$home/mail/$address_file} \ @@ -22814,8 +23207,8 @@ The string value is expanded for each delivery, and must yield an absolute path. The most common settings of this option are variations on one of these examples: .code -file = /var/spool/mail/$local_part_verified -file = /home/$local_part_verified/inbox +file = /var/spool/mail/$local_part_data +file = /home/$local_part_data/inbox file = $home/inbox .endd .cindex "&""sticky""& bit" @@ -23571,7 +23964,7 @@ and directories in a maildir mailbox, including subdirectories for maildir++ folders. Consider this example: .code maildir_format = true -directory = /var/mail/$local_part_verified\ +directory = /var/mail/$local_part_data\ ${if eq{$local_part_suffix}{}{}\ {/.${substr_1:$local_part_suffix}}} maildirfolder_create_regex = /\.[^/]+$ @@ -24048,11 +24441,9 @@ directories are also controllable. See chapter &<>& for details of the local delivery environment and chapter &<>& for a discussion of local delivery batching. -.new .cindex "tainted data" "in pipe command" .cindex pipe "tainted data" Tainted data may not be used for the command name. -.wen .section "Concurrent delivery" "SECID140" @@ -24561,14 +24952,14 @@ configuration for &%procmail%&: # transport procmail_pipe: driver = pipe - command = /usr/local/bin/procmail -d $local_part + command = /usr/local/bin/procmail -d $local_part_data return_path_add delivery_date_add envelope_to_add check_string = "From " escape_string = ">From " umask = 077 - user = $local_part + user = $local_part_data group = mail # router @@ -24759,12 +25150,14 @@ authenticated as a client. .option command_timeout smtp time 5m +.cindex timeout "smtp transport command" This sets a timeout for receiving a response to an SMTP command that has been sent out. It is also used when waiting for the initial banner line from the remote host. Its value must not be zero. .option connect_timeout smtp time 5m +.cindex timeout "smtp transport connect" This sets a timeout for the &[connect()]& function, which sets up a TCP/IP call to a remote host. A setting of zero allows the system timeout (typically several minutes) to act. To have any effect, the value of this option must be @@ -24800,6 +25193,7 @@ be treated as unset and &%tls_require_ciphers%& will be used instead. .option data_timeout smtp time 5m +.cindex timeout "for transmitted SMTP data blocks" This sets a timeout for the transmission of each block in the data portion of the message. As a result, the overall timeout for a message depends on the size of the message. Its value must not be zero. See also &%final_timeout%&. @@ -24870,7 +25264,7 @@ details. .cindex "security" "MX lookup" .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_request_domains%& will be done with -the dnssec request bit set. Setting this transport option is only useful if the +the DNSSEC request bit set. Setting this transport option is only useful if the transport overrides or sets the host names. See the &%dnssec_request_domains%& router option. @@ -24882,7 +25276,7 @@ router option. .cindex "security" "MX lookup" .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_require_domains%& will be done with -the dnssec request bit set. Setting this transport option is only +the DNSSEC request bit set. Setting this transport option is only useful if the transport overrides or sets the host names. See the &%dnssec_require_domains%& router option. @@ -24938,6 +25332,7 @@ fails"& facility. .option final_timeout smtp time 10m +.cindex timeout "for transmitted SMTP data accept" This is the timeout that applies while waiting for the response to the final line containing just &"."& that terminates a message. Its value must not be zero. @@ -25026,7 +25421,8 @@ facilities such as AUTH, PIPELINING, SIZE, and STARTTLS. .option hosts_avoid_pipelining smtp "host list&!!" unset .cindex "PIPELINING" "avoiding the use of" -Exim will not use the SMTP PIPELINING extension when delivering to any host +.cindex "ESMTP extensions" PIPELINING +Exim will not use the ESMTP PIPELINING extension when delivering to any host that matches this list, even if the server host advertises PIPELINING support. .option hosts_pipe_connect smtp "host list&!!" unset @@ -25161,9 +25557,9 @@ TLS session for any host that matches this list. .cindex DANE "requiring for certain servers" If built with DANE support, Exim will require that a DNSSEC-validated TLSA record is present for any host matching the list, -and that a DANE-verified TLS connection is made. See -the &%dnssec_request_domains%& router and transport options. +and that a DANE-verified TLS connection is made. There will be no fallback to in-clear communication. +See the &%dnssec_request_domains%& router and transport options. See section &<>&. .option hosts_require_ocsp smtp "host list&!!" unset @@ -25183,9 +25579,12 @@ incoming messages, use an appropriate ACL. .cindex "authentication" "optional in client" This option provides a list of servers to which, provided they announce authentication support, Exim will attempt to authenticate as a client when it -connects. If authentication fails, Exim will try to transfer the message -unauthenticated. See also &%hosts_require_auth%&, and chapter -&<>& for details of authentication. +connects. If authentication fails +.new +and &%hosts_require_auth%& permits, +.wen +Exim will try to transfer the message unauthenticated. +See also chapter &<>& for details of authentication. .option hosts_try_chunking smtp "host list&!!" * .cindex CHUNKING "enabling, in client" @@ -25193,19 +25592,20 @@ unauthenticated. See also &%hosts_require_auth%&, and chapter .cindex "RFC 3030" "CHUNKING" This option provides a list of servers to which, provided they announce CHUNKING support, Exim will attempt to use BDAT commands rather than DATA. -.new Unless DKIM signing is being done, -.wen BDAT will not be used in conjunction with a transport filter. .option hosts_try_dane smtp "host list&!!" * .cindex DANE "transport options" .cindex DANE "attempting for certain servers" -If built with DANE support, Exim will require that a DNSSEC-validated -TLSA record is present for any host matching the list, -and that a DANE-verified TLS connection is made. See -the &%dnssec_request_domains%& router and transport options. -There will be no fallback to in-clear communication. +.new +If built with DANE support, Exim will look up a +TLSA record for any host matching the list, +If one is found and that lookup was DNSSEC-validated, +then Exim requires that a DANE-verified TLS connection is made for that host; +there will be no fallback to in-clear communication. +.wen +See the &%dnssec_request_domains%& router and transport options. See section &<>&. .option hosts_try_fastopen smtp "host list&!!" * @@ -25230,6 +25630,7 @@ such as DNSBL lookups, will still delay the emission of the SMTP banner. .option hosts_try_prdr smtp "host list&!!" * .cindex "PRDR" "enabling, optional in client" +.cindex "ESMTP extensions" PRDR This option provides a list of servers to which, provided they announce PRDR support, Exim will attempt to negotiate PRDR for multi-recipient messages. @@ -25292,6 +25693,20 @@ so can cause parallel connections to the same host if &%remote_max_parallel%& permits this. +.new +.option message_linelength_limit smtp integer 998 +.cindex "line length" limit +This option sets the maximum line length, in bytes, that the transport +will send. Any messages with lines exceeding the given value +will fail and a failure-DSN ("bounce") message will if possible be returned +to the sender. +The default value is that defined by the SMTP standards. + +It is generally wise to also check in the data ACL so that messages +received via SMTP can be refused without producing a bounce. +.wen + + .option multi_domain smtp boolean&!! true .vindex "&$domain$&" When this option is set, the &(smtp)& transport can handle a number of @@ -25305,6 +25720,12 @@ It is expanded per-address and can depend on any of &$address_data$&, &$domain_data$&, &$local_part_data$&, &$host$&, &$host_address$& and &$host_port$&. +.new +If the connection is DANE-enabled then this option is ignored; +only messages having the domain used for the DANE TLSA lookup are +sent on the connection. +.wen + .option port smtp string&!! "see below" .cindex "port" "sending TCP/IP" .cindex "TCP/IP" "setting outgoing port" @@ -25342,7 +25763,7 @@ If this option is set to &"smtps"&, the default value for the &%port%& option changes to &"smtps"&, and the transport initiates TLS immediately after connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade. The Internet standards bodies used to strongly discourage use of this mode, -but as of RFC 8314 it is perferred over STARTTLS for message submission +but as of RFC 8314 it is preferred over STARTTLS for message submission (as distinct from MTA-MTA communication). @@ -25387,7 +25808,7 @@ See also the &%max_parallel%& generic transport option. .option size_addition smtp integer 1024 -.cindex "SMTP" "SIZE" +.cindex "SIZE" "ESMTP extension" .cindex "message" "size issue for transport filter" .cindex "size" "of message" .cindex "transport" "filter" @@ -25473,11 +25894,25 @@ is used in different ways by OpenSSL and GnuTLS (see sections ciphers is a preference order. +.new +.option tls_resumption_hosts smtp "host list&!!" unset +.cindex TLS resumption +This option controls which connections to use the TLS resumption feature. +See &<>& for details. +.wen + + .option tls_sni smtp string&!! unset .cindex "TLS" "Server Name Indication" +.cindex "TLS" SNI +.cindex SNI "setting in client" .vindex "&$tls_sni$&" -If this option is set then it sets the $tls_out_sni variable and causes any +If this option is set +.new +and the connection is not DANE-validated +.wen +then it sets the $tls_out_sni variable and causes any TLS session to pass this value as the Server Name Indication extension to the remote side, which can be used by the remote side to select an appropriate certificate and private key for the session. @@ -25572,13 +26007,17 @@ The &%tls_verify_certificates%& option must also be set. If both this option and &%tls_try_verify_hosts%& are unset operation is as if this option selected all hosts. -.option utf8_downconvert smtp integer!! unset +.option utf8_downconvert smtp integer&!! -1 .cindex utf8 "address downconversion" .cindex i18n "utf8 address downconversion" If built with internationalization support, -this option controls conversion of UTF-8 in message addresses +this option controls conversion of UTF-8 in message envelope addresses to a-label form. -For details see section &<>&. +If, after expansion, the value is 1, 0, or -1 then this value overrides +any value previously set for the message. Otherwise, any previously +set value is used. To permit use of a previous value, +set this option to an empty string. +For details on the values see section &<>&. @@ -26686,6 +27125,7 @@ transfer of mail between servers that have no managerial connection with each other. .cindex "AUTH" "description of" +.cindex "ESMTP extensions" AUTH Very briefly, the way SMTP authentication works is as follows: .ilist @@ -26976,7 +27416,7 @@ conditions: .ilist The client host must match &%auth_advertise_hosts%& (default *). .next -It the &%server_advertise_condition%& option is set, its expansion must not +If the &%server_advertise_condition%& option is set, its expansion must not yield the empty string, &"0"&, &"no"&, or &"false"&. .endlist @@ -27084,7 +27524,7 @@ encode '\0user@domain.com\0pas$$word' .endd gives an incorrect answer because of the unescaped &"@"& and &"$"& characters. -If you have the &%mimencode%& command installed, another way to do produce +If you have the &%mimencode%& command installed, another way to produce base64-encoded strings is to run the command .code echo -e -n `\0user\0password' | mimencode @@ -27426,7 +27866,14 @@ fixed_plain: client_send = ^username^mysecret .endd The lack of colons means that the entire text is sent with the AUTH -command, with the circumflex characters converted to NULs. A similar example +command, with the circumflex characters converted to NULs. +.new +Note that due to the ambiguity of parsing three consectutive circumflex characters +there is no way to provide a password having a leading circumflex. +.wen + + +A similar example that uses the LOGIN mechanism is: .code fixed_login: @@ -27700,8 +28147,7 @@ connection, a client certificate has been verified, the &"valid-client-cert"& option is passed. When authentication succeeds, the identity of the user who authenticated is placed in &$auth1$&. -.new -The Dovecot configuration to match the above wil look +The Dovecot configuration to match the above will look something like: .code conf.d/10-master.conf :- @@ -27720,7 +28166,6 @@ conf.d/10-auth.conf :- auth_mechanisms = plain login ntlm .endd -.wen .ecindex IIDdcotauth1 .ecindex IIDdcotauth2 @@ -27747,12 +28192,17 @@ scale to handle future authentication mechanisms, so no guarantee can be made that any particular new authentication mechanism will be supported without code changes in Exim. -.new The library is expected to add support in an upcoming realease for the SCRAM-SHA-256 method. The macro _HAVE_AUTH_GSASL_SCRAM_SHA_256 will be defined when this happens. +.new +To see the list of mechanisms supported by the library run Exim with "auth" debug +enabled and look for a line containing "GNU SASL supports". +Note however that some may not have been tested from Exim. +.wen + .option client_authz gsasl string&!! unset This option can be used to supply an &'authorization id'& @@ -27771,25 +28221,45 @@ the password to be used, in clear. .option client_username gsasl string&!! unset This option is exapanded before use, and should result in the account name to be used. -.wen -.new + .option client_spassword gsasl string&!! unset +.new +This option is only supported for library versions 1.9.1 and greater. +The macro _HAVE_AUTH_GSASL_SCRAM_S_KEY will be defined when this is so. +.wen + If a SCRAM mechanism is being used and this option is set +and correctly sized it is used in preference to &%client_password%&. The value after expansion should be a 40 (for SHA-1) or 64 (for SHA-256) character string with the PBKDF2-prepared password, hex-encoded. + Note that this value will depend on the salt and iteration-count supplied by the server. +The option is expanded before use. +.new +During the expansion &$auth1$& is set with the client username, +&$auth2$& with the iteration count, and +&$auth3$& with the salt. + +The intent of this option +is to support clients that can cache thes salted password +to save on recalculation costs. +The cache lookup should return an unusable value +(eg. an empty string) +if the salt or iteration count has changed + +If the authentication succeeds then the above variables are set, +.vindex "&$auth4$&" +plus the calculated salted password value value in &$auth4$&, +during the expansion of the &%client_set_id%& option. +A side-effect of this expansion can be used to prime the cache. .wen - .option server_channelbinding gsasl boolean false -Do not set this true and rely on the properties -without consulting a cryptographic engineer. - Some authentication mechanisms are able to use external context at both ends of the session to bind the authentication to that context, and fail the authentication process if that context differs. Specifically, some TLS @@ -27800,20 +28270,25 @@ This should have meant that certificate identity and verification becomes a non-issue, as a man-in-the-middle attack will cause the correct client and server to see different identifiers and authentication will fail. -.new This is only usable by mechanisms which support "channel binding"; at time of writing, that's the SCRAM family. When using this feature the "-PLUS" variants of the method names need to be used. -.wen This defaults off to ensure smooth upgrade across Exim releases, in case this option causes some clients to start failing. Some future release of Exim might have switched the default to be true. -However, Channel Binding in TLS has proven to be vulnerable in current versions. -Do not plan to rely upon this feature for security, ever, without consulting -with a subject matter expert (a cryptographic engineer). +. However, Channel Binding in TLS has proven to be vulnerable in current versions. +. Do not plan to rely upon this feature for security, ever, without consulting +. with a subject matter expert (a cryptographic engineer). + +.new +This option was deprecated in previous releases due to doubts over +the "Triple Handshake" vulnerability. +Exim takes suitable precausions (requiring Extended Master Secret if TLS +Session Resumption was used) for safety. +.wen .option server_hostname gsasl string&!! "see below" @@ -27861,7 +28336,6 @@ Some mechanisms will use this data. .option server_scram_iter gsasl string&!! 4096 This option provides data for the SCRAM family of mechanisms. -.new The &$auth1$&, &$auth2$& and &$auth3$& variables are available when this option is expanded. @@ -27872,21 +28346,17 @@ a compute cost factor imposed on the client either the iteration count or the salt). A minimum value of 4096 is required by the standards for all current SCRAM mechanism variants. -.wen .option server_scram_salt gsasl string&!! unset This option provides data for the SCRAM family of mechanisms. -.new The &$auth1$&, &$auth2$& and &$auth3$& variables are available when this option is expanded. The value should be a base64-encoded string, of random data typically 4-to-16 bytes long. If unset or empty after expansion the library will provides a value for the protocol conversation. -.wen -.new .option server_key gsasl string&!! unset .option server_skey gsasl string&!! unset These options can be used for the SCRAM family of mechanisms @@ -27912,7 +28382,6 @@ If unset or not of the right length, &%server_password%& will be used. The libgsasl library release includes a utility &'gsasl'& which can be used to generate these values. -.wen .option server_service gsasl string &`smtp`& @@ -28139,7 +28608,7 @@ and for clients to only attempt, this authentication method on a secure (eg. under TLS) connection. One possible use, compatible with the -K-9 Mail Andoid client (&url(https://k9mail.github.io/)), +K-9 Mail Android client (&url(https://k9mail.github.io/)), is for using X509 client certificates. It thus overlaps in function with the TLS authenticator @@ -28492,6 +28961,12 @@ Some other recently added features may only be available in one or the other. This should be documented with the feature. If the documentation does not explicitly state that the feature is infeasible in the other TLS implementation, then patches are welcome. +.new +.next +The output from "exim -bV" will show which (if any) support was included +in the build. +Also, the macro "_HAVE_OPENSSL" or "_HAVE_GNUTLS" will be defined. +.wen .endlist @@ -28717,6 +29192,7 @@ tls_require_ciphers = ${if =={$received_port}{25}\ .section "Configuring an Exim server to use TLS" "SECID182" .cindex "TLS" "configuring an Exim server" +.cindex "ESMTP extensions" STARTTLS When Exim has been built with TLS support, it advertises the availability of the STARTTLS command to client hosts that match &%tls_advertise_hosts%&, but not to any others. The default value of this option is *, which means @@ -28964,6 +29440,61 @@ There is no current way to staple a proof for a client certificate. .endd +.new +.section "Caching of static server configuration items" "SECTserverTLScache" +.cindex certificate caching +.cindex privatekey caching +.cindex crl caching +.cindex ocsp caching +.cindex ciphers caching +.cindex "CA bundle" caching +.cindex "certificate authorities" caching +.cindex tls_certificate caching +.cindex tls_privatekey caching +.cindex tls_crl caching +.cindex tls_ocsp_file caching +.cindex tls_require_ciphers caching +.cindex tls_verify_certificate caching +.cindex caching certificate +.cindex caching privatekey +.cindex caching crl +.cindex caching ocsp +.cindex caching ciphers +.cindex caching "certificate authorities +If any of the main configuration options &%tls_certificate%&, &%tls_privatekey%&, +&%tls_crl%& and &%tls_ocsp_file%& have values with no +expandable elements, +then the associated information is loaded at daemon startup. +It is made available +to child processes forked for handling received SMTP connections. + +This caching is currently only supported under Linux and FreeBSD. + +If caching is not possible, for example if an item has to be dependent +on the peer host so contains a &$sender_host_name$& expansion, the load +of the associated information is done at the startup of the TLS connection. + +The cache is invalidated and reloaded after any changes to the directories +containing files specified by these options. + +The information specified by the main option &%tls_verify_certificates%& +is similarly cached so long as it specifies files explicitly +or (under GnuTLS) is the string &"system,cache"&. +The latter case is not automatically invalidated; +it is the operator's responsibility to arrange for a daemon restart +any time the system certificate authority bundle is updated. +A HUP signal is sufficient for this. +The value &"system"& results in no caching under GnuTLS. + +The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system" +is acceptable in configurations for the Exim executavble. + +Caching of the system Certificate Authorities bundle can +save siginificant time and processing on every TLS connection +accepted by Exim. +.wen + + .section "Configuring an Exim client to use TLS" "SECTclientTLS" @@ -28976,6 +29507,7 @@ deliveries as well as to incoming, the latter one causing logging of the server certificate's DN. The remaining client configuration for TLS is all within the &(smtp)& transport. +.cindex "ESMTP extensions" STARTTLS It is not necessary to set any options to have TLS work in the &(smtp)& transport. If Exim is built with TLS support, and TLS is advertised by a server, the &(smtp)& transport always tries to start a TLS session. However, @@ -29003,7 +29535,10 @@ unencrypted. The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)& transport provide the client with a certificate, which is passed to the server -if it requests it. If the server is Exim, it will request a certificate only if +if it requests it. +This is an optional thing for TLS connections, although either end +may insist on it. +If the server is Exim, it will request a certificate only if &%tls_verify_hosts%& or &%tls_try_verify_hosts%& matches the client. &*Note*&: Do not use a certificate which has the OCSP-must-staple extension, @@ -29028,8 +29563,14 @@ certificate verification to the listed servers. Verification either must or need not succeed respectively. The &%tls_verify_cert_hostnames%& option lists hosts for which additional -checks are made: that the host name (the one in the DNS A record) -is valid for the certificate. +name checks are made on the server certificate. +.new +The match against this list is, as per other Exim usage, the +IP for the host. That is most closely associated with the +name on the DNS A (or AAAA) record for the host. +However, the name that needs to be in the certificate +is the one at the head of any CNAME chain leading to the A record. +.wen The option defaults to always checking. The &(smtp)& transport has two OCSP-related options: @@ -29077,8 +29618,66 @@ outgoing connection. +.new +.section "Caching of static client configuration items" "SECTclientTLScache" +.cindex certificate caching +.cindex privatekey caching +.cindex crl caching +.cindex ciphers caching +.cindex "CA bundle" caching +.cindex "certificate authorities" caching +.cindex tls_certificate caching +.cindex tls_privatekey caching +.cindex tls_crl caching +.cindex tls_require_ciphers caching +.cindex tls_verify_certificate caching +.cindex caching certificate +.cindex caching privatekey +.cindex caching crl +.cindex caching ciphers +.cindex caching "certificate authorities +If any of the transport configuration options &%tls_certificate%&, &%tls_privatekey%& +and &%tls_crl%& have values with no +expandable elements, +then the associated information is loaded per smtp transport +at daemon startup, at the start of a queue run, or on a +command-line specified message delivery. +It is made available +to child processes forked for handling making SMTP connections. + +This caching is currently only supported under Linux. + +If caching is not possible, the load +of the associated information is done at the startup of the TLS connection. + +The cache is invalidated in the daemon +and reloaded after any changes to the directories +containing files specified by these options. + +The information specified by the main option &%tls_verify_certificates%& +is similarly cached so long as it specifies files explicitly +or (under GnuTLS) is the string &"system,cache"&. +The latter case is not automatically invaludated; +it is the operator's responsibility to arrange for a daemon restart +any time the system certificate authority bundle is updated. +A HUP signal is sufficient for this. +The value &"system"& results in no caching under GnuTLS. + +The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system" +is acceptable in configurations for the Exim executavble. + +Caching of the system Certificate Authorities bundle can +save siginificant time and processing on every TLS connection +initiated by Exim. +.wen + + + + .section "Use of TLS Server Name Indication" "SECTtlssni" .cindex "TLS" "Server Name Indication" +.cindex "TLS" SNI +.cindex SNI .vindex "&$tls_in_sni$&" .oindex "&%tls_in_sni%&" With TLS1.0 or above, there is an extension mechanism by which extra @@ -29110,6 +29709,11 @@ nothing more to it. Choosing a sensible value not derived insecurely is the only point of caution. The &$tls_out_sni$& variable will be set to this string for the lifetime of the client connection (including during authentication). +.new +If DANE validated the connection attempt then the value of the &%tls_sni%& option +is forced to the domain part of the recipient address. +.wen + Except during SMTP client sessions, if &$tls_in_sni$& is set then it is a string received from a client. It can be logged with the &%log_selector%& item &`+tls_sni`&. @@ -29223,7 +29827,7 @@ Ivan is the author of the popular TLS testing tools at .section "Certificate chains" "SECID186" -The file named by &%tls_certificate%& may contain more than one +A file named by &%tls_certificate%& may contain more than one certificate. This is useful in the case where the certificate that is being sent is validated by an intermediate certificate which the other end does not have. Multiple certificates must be in the correct order in the file. @@ -29296,6 +29900,100 @@ Open-source PKI book, available online at .ecindex IIDencsmtp2 +.new +.section "TLS Resumption" "SECTresumption" +.cindex TLS resumption +TLS Session Resumption for TLS 1.2 and TLS 1.3 connections can be used (defined +in RFC 5077 for 1.2). The support for this requires GnuTLS 3.6.3 or OpenSSL 1.1.1 +(or later). + +Session resumption (this is the "stateless" variant) involves the server sending +a "session ticket" to the client on one connection, which can be stored by the +client and used for a later session. The ticket contains sufficient state for +the server to reconstruct the TLS session, avoiding some expensive crypto +calculation and (on TLS1.2) one full packet roundtrip time. + +.ilist +Operational cost/benefit: + + The extra data being transmitted costs a minor amount, and the client has + extra costs in storing and retrieving the data. + + In the Exim/Gnutls implementation the extra cost on an initial connection + which is TLS1.2 over a loopback path is about 6ms on 2017-laptop class hardware. + The saved cost on a subsequent connection is about 4ms; three or more + connections become a net win. On longer network paths, two or more + connections will have an average lower startup time thanks to the one + saved packet roundtrip. TLS1.3 will save the crypto cpu costs but not any + packet roundtrips. + +.cindex "hints database" tls + Since a new hints DB is used on the TLS client, + the hints DB maintenance should be updated to additionally handle "tls". + +.next +Security aspects: + + The session ticket is encrypted, but is obviously an additional security + vulnarability surface. An attacker able to decrypt it would have access + all connections using the resumed session. + The session ticket encryption key is not committed to storage by the server + and is rotated regularly (OpenSSL: 1hr, and one previous key is used for + overlap; GnuTLS 6hr but does not specify any overlap). + Tickets have limited lifetime (2hr, and new ones issued after 1hr under + OpenSSL. GnuTLS 2hr, appears to not do overlap). + + There is a question-mark over the security of the Diffie-Helman parameters + used for session negotiation. + +.next +Observability: + + The &%log_selector%& "tls_resumption" appends an asterisk to the tls_cipher "X=" + element. + + The variables &$tls_in_resumption$& and &$tls_out_resumption$& + have bits 0-4 indicating respectively + support built, client requested ticket, client offered session, + server issued ticket, resume used. A suitable decode list is provided + in the builtin macro _RESUME_DECODE for in &%listextract%& expansions. + +.next +Control: + +The &%tls_resumption_hosts%& main option specifies a hostlist for which +exim, operating as a server, will offer resumption to clients. +Current best practice is to not offer the feature to MUA connection. +Commonly this can be done like this: +.code +tls_resumption_hosts = ${if inlist {$received_port}{587:465} {:}{*}} +.endd +If the peer host matches the list after expansion then resumption +is offered and/or accepted. + +The &%tls_resumption_hosts%& smtp transport option performs the +equivalent function for operation as a client. +If the peer host matches the list after expansion then resumption +is attempted (if a stored session is available) or the information +stored (if supplied by the peer). + + +.next +Issues: + + In a resumed session: +.ilist + The variables &$tls_{in,out}_cipher$& will have values different + to the original (under GnuTLS). +.next + The variables &$tls_{in,out}_ocsp$& will be "not requested" or "no response", + and the &%hosts_require_ocsp%& smtp trasnport option will fail. +. XXX need to do something with that hosts_require_ocsp +.endlist + +.endlist +.wen + .section DANE "SECDANE" .cindex DANE @@ -29313,7 +30011,7 @@ by (a) is thought to be smaller than that of the set of root CAs. It also allows the server to declare (implicitly) that connections to it should use TLS. An MITM could simply fail to pass on a server's STARTTLS. -DANE scales better than having to maintain (and side-channel communicate) copies of server certificates +DANE scales better than having to maintain (and communicate via side-channel) copies of server certificates for every possible target server. It also scales (slightly) better than having to maintain on an SMTP client a copy of the standard CAs bundle. It also means not having to pay a CA for certificates. @@ -29437,7 +30135,7 @@ the &%dnssec_request_domains%& router or transport option. DANE will only be usable if the target host has DNSSEC-secured MX, A and TLSA records. -A TLSA lookup will be done if either of the above options match and the host-lookup succeeded using dnssec. +A TLSA lookup will be done if either of the above options match and the host-lookup succeeded using DNSSEC. If a TLSA lookup is done and succeeds, a DANE-verified TLS connection will be required for the host. If it does not, the host will not be used; there is no fallback to non-DANE or non-TLS. @@ -29458,6 +30156,7 @@ If DANE is requested and useable (see above) the following transport options are tls_verify_certificates tls_crl tls_verify_cert_hostnames + tls_sni .endd If DANE is not usable, whether requested or not, and CA-anchored @@ -30114,8 +30813,8 @@ The &%message%& modifier operates exactly as it does for &%accept%&. &%drop%&: This verb behaves like &%deny%&, except that an SMTP connection is forcibly closed after the 5&'xx'& error message has been sent. For example: .code -drop message = I don't take more than 20 RCPTs - condition = ${if > {$rcpt_count}{20}} +drop condition = ${if > {$rcpt_count}{20}} + message = I don't take more than 20 RCPTs .endd There is no difference between &%deny%& and &%drop%& for the connect-time ACL. The connection is always dropped after sending a 550 response. @@ -30918,13 +31617,13 @@ calling host. Its effect lasts until the end of the SMTP connection. .vitem &*control&~=&~no_pipelining*& .cindex "PIPELINING" "suppressing advertising" +.cindex "ESMTP extensions" PIPELINING This control turns off the advertising of the PIPELINING extension to SMTP in the current session. To be useful, it must be obeyed before Exim sends its response to an EHLO command. Therefore, it should normally appear in an ACL controlled by &%acl_smtp_connect%& or &%acl_smtp_helo%&. See also &%pipelining_advertise_hosts%&. -.new .vitem &*control&~=&~queue/*&<&'options'&>* &&& &*control&~=&~queue_only*& .oindex "&%queue%&" @@ -30949,7 +31648,6 @@ able to send all such messages on a single connection. The control only applies to the current message, not to any subsequent ones that may be received in the same SMTP connection. -.wen .vitem &*control&~=&~submission/*&<&'options'&> .cindex "message" "submission" @@ -30993,7 +31691,7 @@ data is read. that are being submitted at the same time using &%-bs%& or &%-bS%&. .vitem &*control&~=&~utf8_downconvert*& -This control enables conversion of UTF-8 in message addresses +This control enables conversion of UTF-8 in message envelope addresses to a-label form. For details see section &<>&. .endlist vlist @@ -31350,7 +32048,7 @@ of the lookup is made available in the &$host_data$& variable. This allows you, for example, to set up a statement like this: .code deny hosts = net-lsearch;/some/file -message = $host_data + message = $host_data .endd which gives a custom error message for each denied host. @@ -31463,8 +32161,9 @@ send email. Details of how this works are given in section .cindex "header lines" "verifying header names only ASCII" .cindex "verifying" "header names only ASCII" This condition is relevant only in an ACL that is run after a message has been -received, that is, in an ACL specified by &%acl_smtp_data%& or -&%acl_not_smtp%&. It checks all header names (not the content) to make sure +received. +This usually means an ACL specified by &%acl_smtp_data%& or &%acl_not_smtp%&. +It checks all header names (not the content) to make sure there are no non-ASCII characters, also excluding control characters. The allowable characters are decimal ASCII values 33 through 126. @@ -31494,8 +32193,8 @@ section &<>& (callouts are described in section condition to restrict it to bounce messages only: .code deny senders = : - message = A valid sender header is required for bounces !verify = header_sender + message = A valid sender header is required for bounces .endd .vitem &*verify&~=&~header_syntax*& @@ -31619,7 +32318,7 @@ Note that '/' is legal in local-parts; if the address may have such (eg. is generated from the received message) they must be protected from the options parsing by doubling: .code -verify = sender=${sg{${address:$h_sender:}}{/}{//}} +verify = sender=${listquote{/}{${address:$h_sender:}}} .endd .endlist @@ -31677,8 +32376,8 @@ Testing the list of domains stops as soon as a match is found. If you want to warn for one list and block for another, you can use two different statements: .code deny dnslists = blackholes.mail-abuse.org -warn message = X-Warn: sending host is on dialups list - dnslists = dialups.mail-abuse.org +warn dnslists = dialups.mail-abuse.org + message = X-Warn: sending host is on dialups list .endd .cindex caching "of dns lookup" .cindex DNS TTL @@ -31719,8 +32418,8 @@ addresses (see, e.g., the &'domain based zones'& link at with these lists. You can change the name that is looked up in a DNS list by listing it after the domain name, introduced by a slash. For example, .code -deny message = Sender's domain is listed at $dnslist_domain - dnslists = dsn.rfc-ignorant.org/$sender_address_domain +deny dnslists = dsn.rfc-ignorant.org/$sender_address_domain + message = Sender's domain is listed at $dnslist_domain .endd This particular example is useful only in ACLs that are obeyed after the RCPT or DATA commands, when a sender address is available. If (for @@ -31784,13 +32483,13 @@ dnslists = black.list.tld/a.domain::b.domain However, when the data for the list is obtained from a lookup, the second form is usually much more convenient. Consider this example: .code -deny message = The mail servers for the domain \ +deny dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\ + ${lookup dnsdb {>|mxh=\ + $sender_address_domain} }} } + message = The mail servers for the domain \ $sender_address_domain \ are listed at $dnslist_domain ($dnslist_value); \ see $dnslist_text. - dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\ - ${lookup dnsdb {>|mxh=\ - $sender_address_domain} }} } .endd Note the use of &`>|`& in the dnsdb lookup to specify the separator for multiple DNS records. The inner dnsdb lookup produces a list of MX hosts @@ -31827,6 +32526,13 @@ Section &<>& below describes how you can distinguish between different values. Some DNS lists may return more than one address record; see section &<>& for details of how they are checked. +.new +Values returned by a properly running DBSBL should be in the 127.0.0.0/8 +range. If a DNSBL operator loses control of the domain, lookups on it +may start returning other addresses. Because of this, Exim now ignores +returned values outside the 127/8 region. +.wen + .section "Variables set from DNS lists" "SECID204" .cindex "expansion" "variables, set from DNS list" @@ -31863,7 +32569,7 @@ very meaningful. See section &<>& for a way of obtaining more information. You can use the DNS list variables in &%message%& or &%log_message%& modifiers -&-- although these appear before the condition in the ACL, they are not +&-- even if these appear before the condition in the ACL, they are not expanded until after it has failed. For example: .code deny hosts = !+local_networks @@ -31963,6 +32669,14 @@ deny dnslists = relays.ordb.org .endd which is less clear, and harder to maintain. +Negation can also be used with a bitwise-and restriction. +The dnslists condition with only be trus if a result is returned +by the lookup which, anded with the restriction, is all zeroes. +For example: +.code +deny dnslists = zen.spamhaus.org!&0.255.255.0 +.endd + @@ -32049,12 +32763,12 @@ restrictions, to get the TXT record. As a byproduct of this, there is also a check that the IP being tested is indeed on the first list. The first domain is the one that is put in &$dnslist_domain$&. For example: .code -deny message = \ - rejected because $sender_host_address is blacklisted \ - at $dnslist_domain\n$dnslist_text - dnslists = \ +deny dnslists = \ sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \ dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10 + message = \ + rejected because $sender_host_address is blacklisted \ + at $dnslist_domain\n$dnslist_text .endd For the first blacklist item, this starts by doing a lookup in &'sbl-xbl.spamhaus.org'& and testing for a 127.0.0.2 return. If there is a @@ -32201,7 +32915,7 @@ in kilobytes, megabytes, or gigabytes, respectively. The &%per_rcpt%& option causes Exim to limit the rate at which recipients are accepted. It can be used in the &%acl_smtp_rcpt%&, &%acl_smtp_predata%&, -&%acl_smtp_mime%&, &%acl_smtp_data%&, or &%acl_smtp_rcpt%& ACLs. In +&%acl_smtp_mime%&, or &%acl_smtp_data%& ACLs. In &%acl_smtp_rcpt%& the rate is updated one recipient at a time; in the other ACLs the rate is updated with the total (accepted) recipient count in one go. Note that in either case the rate limiting engine will see a message with many @@ -32244,12 +32958,12 @@ new rate. .code acl_check_connect: deny ratelimit = 100 / 5m / readonly - log_message = RATE CHECK: $sender_rate/$sender_rate_period \ + log_message = RATE CHECK: $sender_rate/$sender_rate_period \ (max $sender_rate_limit) # ... acl_check_mail: warn ratelimit = 100 / 5m / strict - log_message = RATE UPDATE: $sender_rate/$sender_rate_period \ + log_message = RATE UPDATE: $sender_rate/$sender_rate_period \ (max $sender_rate_limit) .endd @@ -32359,16 +33073,16 @@ deny authenticated = * ratelimit = 100 / 1d / strict / $authenticated_id # System-wide rate limit -defer message = Sorry, too busy. Try again later. - ratelimit = 10 / 1s / $primary_hostname +defer ratelimit = 10 / 1s / $primary_hostname + message = Sorry, too busy. Try again later. # Restrict incoming rate from each host, with a default # set using a macro and special cases looked up in a table. -defer message = Sender rate exceeds $sender_rate_limit \ - messages per $sender_rate_period - ratelimit = ${lookup {$sender_host_address} \ +defer ratelimit = ${lookup {$sender_host_address} \ cdb {DB/ratelimits.cdb} \ {$value} {RATELIMIT} } + message = Sender rate exceeds $sender_rate_limit \ + messages per $sender_rate_period .endd &*Warning*&: If you have a busy server with a lot of &%ratelimit%& tests, especially with the &%per_rcpt%& option, you may suffer from a performance @@ -32417,6 +33131,15 @@ The &%success_on_redirect%& option causes verification always to succeed immediately after a successful redirection. By default, if a redirection generates just one address, that address is also verified. See further discussion in section &<>&. +.new +.next +If the &%quota%& option is specified for recipient verify, +successful routing to an appendfile transport is followed by a call into +the transport to evaluate the quota status for the recipient. +No actual delivery is done, but verification will succeed if the quota +is sufficient for the message (if the sender gave a message size) or +not already exceeded (otherwise). +.wen .endlist .cindex "verifying address" "differentiating failures" @@ -32450,6 +33173,9 @@ connection, HELO, or MAIL). &%recipient%&: The RCPT command in a callout was rejected. .next &%postmaster%&: The postmaster check in a callout was rejected. +.new +.next +&%quota%&: The quota check for a local recipient did non pass. .endlist The main use of these variables is expected to be to distinguish between @@ -32779,6 +33505,38 @@ behaviour will be the same. +.new +.section "Quota caching" "SECTquotacache" +.cindex "hints database" "quota cache" +.cindex "quota" "cache, description of" +.cindex "caching" "quota" +Exim caches the results of quota verification +in order to reduce the amount of resources used. +The &"callout"& hints database is used. + +The default cache periods are five minutes for a positive (good) result +and one hour for a negative result. +To change the periods the &%quota%& option can be followed by an equals sign +and a number of optional paramemters, separated by commas. +For example: +.code +verify = recipient/quota=cachepos=1h,cacheneg=1d +.endd +Possible parameters are: +.vlist +.vitem &*cachepos&~=&~*&<&'time&~interval'&> +.cindex "quota cache" "positive entry expiry, specifying" +Set the lifetime for a positive cache entry. +A value of zero seconds is legitimate. + +.vitem &*cacheneg&~=&~*&<&'time&~interval'&> +.cindex "quota cache" "negative entry expiry, specifying" +As above, for a negative entry. + +.vitem &*no_cache*& +Set both positive and negative lifetimes to zero. +.wen + .section "Sender address verification reporting" "SECTsenaddver" .cindex "verifying" "suppressing error details" See section &<>& for a general discussion of @@ -32957,16 +33715,16 @@ list called &%batv_senders%&. Then, in the ACL for RCPT commands, you could use this: .code # Bounces: drop unsigned addresses for BATV senders -deny message = This address does not send an unsigned reverse path - senders = : +deny senders = : recipients = +batv_senders + message = This address does not send an unsigned reverse path # Bounces: In case of prvs-signed address, check signature. -deny message = Invalid reverse path signature. - senders = : +deny senders = : condition = ${prvscheck {$local_part@$domain}\ {PRVSCHECK_SQL}{1}} !condition = $prvscheck_result + message = Invalid reverse path signature. .endd The first statement rejects recipients for bounce messages that are addressed to plain BATV sender addresses, because it is known that BATV senders do not @@ -33503,13 +34261,13 @@ imposed by your anti-virus scanner. Here is a very simple scanning example: .code -deny message = This message contains malware ($malware_name) - malware = * +deny malware = * + message = This message contains malware ($malware_name) .endd The next example accepts messages when there is a problem with the scanner: .code -deny message = This message contains malware ($malware_name) - malware = */defer_ok +deny malware = */defer_ok + message = This message contains malware ($malware_name) .endd The next example shows how to use an ACL variable to scan with both sophie and aveserver. It assumes you have set: @@ -33518,13 +34276,13 @@ av_scanner = $acl_m0 .endd in the main Exim configuration. .code -deny message = This message contains malware ($malware_name) - set acl_m0 = sophie +deny set acl_m0 = sophie malware = * + message = This message contains malware ($malware_name) -deny message = This message contains malware ($malware_name) - set acl_m0 = aveserver +deny set acl_m0 = aveserver malware = * + message = This message contains malware ($malware_name) .endd @@ -33653,8 +34411,8 @@ is set to record the actual address used. .section "Calling SpamAssassin from an Exim ACL" "SECID206" Here is a simple example of the use of the &%spam%& condition in a DATA ACL: .code -deny message = This message was classified as SPAM - spam = joe +deny spam = joe + message = This message was classified as SPAM .endd The right-hand side of the &%spam%& condition specifies a name. This is relevant if you have set up multiple SpamAssassin profiles. If you do not want @@ -33686,9 +34444,9 @@ large ones may cause significant performance degradation. As most spam messages are quite small, it is recommended that you do not scan the big ones. For example: .code -deny message = This message was classified as SPAM - condition = ${if < {$message_size}{10K}} +deny condition = ${if < {$message_size}{10K}} spam = nobody + message = This message was classified as SPAM .endd The &%spam%& condition returns true if the threshold specified in the user's @@ -33746,8 +34504,8 @@ failed. If you want to treat DEFER as FAIL (to pass on to the next ACL statement block), append &`/defer_ok`& to the right-hand side of the spam condition, like this: .code -deny message = This message was classified as SPAM - spam = joe/defer_ok +deny spam = joe/defer_ok + message = This message was classified as SPAM .endd This causes messages to be accepted even if there is a problem with &%spamd%&. @@ -33765,9 +34523,9 @@ warn spam = nobody add_header = Subject: *SPAM* $h_Subject: # reject spam at high scores (> 12) -deny message = This message scored $spam_score spam points. - spam = nobody:true +deny spam = nobody:true condition = ${if >{$spam_score_int}{120}{1}{0}} + message = This message scored $spam_score spam points. .endd @@ -33971,10 +34729,10 @@ As an example, the following will ban &"HTML mail"& (including that sent with alternative plain text), while allowing HTML files to be attached. HTML coverletter mail attached to non-HTML coverletter mail will also be allowed: .code -deny message = HTML mail is not accepted here -!condition = $mime_is_rfc822 -condition = $mime_is_coverletter -condition = ${if eq{$mime_content_type}{text/html}{1}{0}} +deny !condition = $mime_is_rfc822 + condition = $mime_is_coverletter + condition = ${if eq{$mime_content_type}{text/html}{1}{0}} + message = HTML mail is not accepted here .endd .vitem &$mime_is_multipart$& @@ -34027,8 +34785,8 @@ expanded before being used, you must also escape dollar signs and backslashes with more backslashes, or use the &`\N`& facility to disable expansion. Here is a simple example that contains two regular expressions: .code -deny message = contains blacklisted regex ($regex_match_string) - regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL +deny regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL + message = contains blacklisted regex ($regex_match_string) .endd The conditions returns true if any one of the regular expressions matches. The &$regex_match_string$& expansion variable is then set up and contains the @@ -34096,10 +34854,8 @@ HAVE_LOCAL_SCAN=yes LOCAL_SCAN_SOURCE=Local/local_scan.c .endd for example. The function must be called &[local_scan()]&; -.new the source file(s) for it should first #define LOCAL_SCAN and then #include "local_scan.h". -.wen It is called by Exim after it has received a message, when the success return code is about to be sent. This is after all the ACLs have been run. The return code from your @@ -34780,7 +35536,6 @@ dropping of a TCP/IP connection), you can call &'smtp_fflush()'&, which has no arguments. It flushes the output stream, and returns a non-zero value if there is an error. -.new .vitem &*void&~*store_get(int,BOOL)*& This function accesses Exim's internal store (memory) manager. It gets a new chunk of memory whose size is given by the first argument. @@ -34789,7 +35544,6 @@ data possibly coming from an attacker (eg. the message content), FALSE if it is locally-sourced. Exim bombs out if it ever runs out of memory. See the next section for a discussion of memory handling. -.wen .vitem &*void&~*store_get_perm(int,BOOL)*& This function is like &'store_get()'&, but it always gets memory from the @@ -35110,20 +35864,20 @@ address if its delivery failed. .section "Per-address filtering" "SECTperaddfil" -.vindex "&$domain$&" -.vindex "&$local_part$&" +.vindex "&$domain_data$&" +.vindex "&$local_part_data$&" In contrast to the system filter, which is run just once per message for each delivery attempt, it is also possible to set up a system-wide filtering operation that runs once for each recipient address. In this case, variables -such as &$local_part$& and &$domain$& can be used, and indeed, the choice of -filter file could be made dependent on them. This is an example of a router -which implements such a filter: +such as &$local_part_data$& and &$domain_data$& can be used, +and indeed, the choice of filter file could be made dependent on them. +This is an example of a router which implements such a filter: .code central_filter: check_local_user driver = redirect domains = +local_domains - file = /central/filters/$local_part_verified + file = /central/filters/$local_part_data no_verify allow_filter allow_freeze @@ -35365,8 +36119,7 @@ incoming SMTP message from a source that is not permitted to send them. .section "Resent- header lines" "SECID220" -.cindex "&%Resent-%& header lines" -.cindex "header lines" "Resent-" +.chindex Resent- RFC 2822 makes provision for sets of header lines starting with the string &`Resent-`& to be added to a message when it is resent by the original recipient to somebody else. These headers are &'Resent-Date:'&, @@ -35422,8 +36175,7 @@ existing &'Bcc:'& is not removed. .section "The Date: header line" "SECID223" -.cindex "&'Date:'& header line" -.cindex "header lines" "Date:" +.cindex Date: If a locally-generated or submission-mode message has no &'Date:'& header line, Exim adds one, using the current date and time, unless the &%suppress_local_fixups%& control has been specified. @@ -35440,8 +36192,7 @@ messages. .section "The Envelope-to: header line" "SECID225" -.cindex "&'Envelope-to:'& header line" -.cindex "header lines" "Envelope-to:" +.chindex Envelope-to: .oindex "&%envelope_to_remove%&" &'Envelope-to:'& header lines are not part of the standard RFC 2822 header set. Exim can be configured to add them to the final delivery of messages. (See the @@ -35452,8 +36203,7 @@ messages. .section "The From: header line" "SECTthefrohea" -.cindex "&'From:'& header line" -.cindex "header lines" "From:" +.chindex From: .cindex "Sendmail compatibility" "&""From""& line" .cindex "message" "submission" .cindex "submission mode" @@ -35496,8 +36246,7 @@ name as described in section &<>&. .section "The Message-ID: header line" "SECID226" -.cindex "&'Message-ID:'& header line" -.cindex "header lines" "Message-ID:" +.chindex Message-ID: .cindex "message" "submission" .oindex "&%message_id_header_text%&" If a locally-generated or submission-mode incoming message does not contain a @@ -35512,8 +36261,7 @@ in this header line by setting the &%message_id_header_text%& and/or .section "The Received: header line" "SECID227" -.cindex "&'Received:'& header line" -.cindex "header lines" "Received:" +.chindex Received: A &'Received:'& header line is added at the start of every message. The contents are defined by the &%received_header_text%& configuration option, and Exim automatically adds a semicolon and a timestamp to the configured string. @@ -35529,8 +36277,7 @@ changed to the time of acceptance, which is (apart from a small delay while the .section "The References: header line" "SECID228" -.cindex "&'References:'& header line" -.cindex "header lines" "References:" +.chindex References: Messages created by the &(autoreply)& transport include a &'References:'& header line. This is constructed according to the rules that are described in section 3.64 of RFC 2822 (which states that replies should contain such a @@ -35544,8 +36291,7 @@ incoming message. If there are more than 12, the first one and then the final .section "The Return-path: header line" "SECID229" -.cindex "&'Return-path:'& header line" -.cindex "header lines" "Return-path:" +.chindex Return-path: .oindex "&%return_path_remove%&" &'Return-path:'& header lines are defined as something an MTA may insert when it does the final delivery of messages. (See the generic &%return_path_add%& @@ -35558,7 +36304,7 @@ default), Exim removes &'Return-path:'& header lines from incoming messages. .section "The Sender: header line" "SECTthesenhea" .cindex "&'Sender:'& header line" .cindex "message" "submission" -.cindex "header lines" "Sender:" +.chindex Sender: For a locally-originated message from an untrusted user, Exim may remove an existing &'Sender:'& header line, and it may add a new one. You can modify these actions by setting the &%local_sender_retain%& option true, the @@ -35881,13 +36627,14 @@ used to contain the envelope information. .cindex "outgoing LMTP over TCP/IP" .cindex "EHLO" .cindex "HELO" -.cindex "SIZE option on MAIL command" +.cindex "SIZE" "option on MAIL command" Outgoing SMTP and LMTP over TCP/IP is implemented by the &(smtp)& transport. The &%protocol%& option selects which protocol is to be used, but the actual processing is the same in both cases. +.cindex "ESMTP extensions" SIZE If, in response to its EHLO command, Exim is told that the SIZE -parameter is supported, it adds SIZE=<&'n'&> to each subsequent MAIL +extension is supported, it adds SIZE=<&'n'&> to each subsequent MAIL command. The value of <&'n'&> is the message size plus the value of the &%size_addition%& option (default 1024) to allow for additions to the message such as per-transport header lines, or changes made in a @@ -36283,7 +37030,8 @@ RCPT failures. .section "The ETRN command" "SECTETRN" .cindex "ETRN" "processing" -RFC 1985 describes an SMTP command called ETRN that is designed to +.cindex "ESMTP extensions" ETRN +RFC 1985 describes an ESMTP command called ETRN that is designed to overcome the security problems of the TURN command (which has fallen into disuse). When Exim receives an ETRN command on a TCP/IP connection, it runs the ACL specified by &%acl_smtp_etrn%& in order to decide whether the command @@ -36901,13 +37649,11 @@ virtual: data = ${lookup{$local_part}lsearch{/etc/mail/virtual/$domain_data}} no_more .endd -.new The &%domains%& option specifies that the router is to be skipped, unless there is a file in the &_/etc/mail/virtual_& directory whose name is the same as the domain that is being processed. The &(dsearch)& lookup used results in an untainted version of &$domain$& being placed into the &$domain_data$& variable. -.wen When the router runs, it looks up the local part in the file to find a new address (or list of addresses). The &%no_more%& @@ -36938,7 +37684,7 @@ follows: .code my_mailboxes: driver = appendfile - file = /var/mail/$domain/$local_part_data + file = /var/mail/$domain_data/$local_part_data user = mail .endd This uses a directory of mailboxes for each domain. The &%user%& setting is @@ -36978,7 +37724,7 @@ It runs a user's &_.forward_& file for all local parts of the form cases by testing the variable &$local_part_suffix$&. For example: .code if $local_part_suffix contains -special then -save /home/$local_part/Mail/special +save /home/$local_part_data/Mail/special endif .endd If the filter file does not exist, or does not deal with such addresses, they @@ -36993,9 +37739,9 @@ another MTA: userforward: driver = redirect check_local_user - file = $home/.forward$local_part_suffix local_part_suffix = -* local_part_suffix_optional + file = ${lookup {.forward$local_part_suffix} dsearch,ret=full {$home} {$value}fail} allow_filter .endd If there is no suffix, &_.forward_& is used; if the suffix is &'-special'&, for @@ -37643,7 +38389,8 @@ fields record the router and transport that were used to process the address. If SMTP AUTH was used for the delivery there is an additional item A= followed by the name of the authenticator that was used. If an authenticated identification was set up by the authenticator's &%client_set_id%& -option, this is logged too, separated by a colon from the authenticator name. +option, this is logged too, as a second colon-separated list item. +Optionally (see the &%smtp_mailauth%& &%log_selector%&) there may be a third list item. If a shadow transport was run after a successful local delivery, the log line for the successful delivery has an item added on the end, of the form @@ -37657,8 +38404,11 @@ parentheses afterwards. When more than one address is included in a single delivery (for example, two SMTP RCPT commands in one transaction) the second and subsequent addresses are flagged with &`->`& instead of &`=>`&. When two or more messages are delivered -down a single SMTP connection, an asterisk follows the IP address in the log -lines for the second and subsequent messages. +down a single SMTP connection, an asterisk follows the +.new +remote IP address (and port if enabled) +.wen +in the log lines for the second and subsequent messages. When two or more messages are delivered down a single TLS connection, the DNS and some TLS-related information logged for the first message delivered will not be present in the log lines for the second and subsequent messages. @@ -37912,6 +38662,7 @@ selection marked by asterisks: &`*tls_certificate_verified `& certificate verification status &`*tls_cipher `& TLS cipher suite on <= and => lines &` tls_peerdn `& TLS peer DN on <= and => lines +&` tls_resumption `& append * to cipher field &` tls_sni `& TLS SNI on <= lines &` unknown_in_list `& DNS lookup failed in list match @@ -38024,6 +38775,7 @@ routing email addresses, but it does apply to &"byname"& lookups. client's ident port times out. .next .cindex "log" "incoming interface" +.cindex "log" "outgoing interface" .cindex "log" "local interface" .cindex "log" "local address and port" .cindex "TCP/IP" "logging local address and port" @@ -38032,7 +38784,10 @@ client's ident port times out. to the &"<="& line as an IP address in square brackets, tagged by I= and followed by a colon and the port number. The local interface and port are also added to other SMTP log lines, for example, &"SMTP connection from"&, to -rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines. +rejection lines, and (despite the name) to outgoing +.new +&"=>"&, &"->"&, &"=="& and &"**"& lines. +.wen The latter can be disabled by turning off the &%outgoing_interface%& option. .next .cindex log "incoming proxy address" @@ -38299,7 +39054,7 @@ unchanged, or whether they should be rendered as escape sequences. when TLS is in use. The item is &`CV=yes`& if the peer's certificate was verified using a CA trust anchor, -&`CA=dane`& if using a DNS trust anchor, +&`CV=dane`& if using a DNS trust anchor, and &`CV=no`& if not. .next .cindex "log" "TLS cipher" @@ -38313,8 +39068,17 @@ connection, the cipher suite used is added to the log line, preceded by X=. connection, and a certificate is supplied by the remote host, the peer DN is added to the log line, preceded by DN=. .next +.cindex "log" "TLS resumption" +.cindex "TLS" "logging session resumption" +.new +&%tls_resumption%&: When a message is sent or received over an encrypted +connection and the TLS session resumed one used on a previous TCP connection, +an asterisk is appended to the X= cipher field in the log line. +.wen +.next .cindex "log" "TLS SNI" .cindex "TLS" "logging SNI" +.cindex SNI logging &%tls_sni%&: When a message is received over an encrypted connection, and the remote host provided the Server Name Indication extension, the SNI is added to the log line, preceded by SNI=. @@ -38371,9 +39135,9 @@ the next chapter. The utilities described here are: "check address acceptance from given IP" .irow &<>& &'exim_dbmbuild'& "build a DBM file" .irow &<>& &'exinext'& "extract retry information" -.irow &<>& &'exim_dumpdb'& "dump a hints database" -.irow &<>& &'exim_tidydb'& "clean up a hints database" -.irow &<>& &'exim_fixdb'& "patch a hints database" +.irow &<>& &'exim_dumpdb'& "dump a hints database" +.irow &<>& &'exim_tidydb'& "clean up a hints database" +.irow &<>& &'exim_fixdb'& "patch a hints database" .irow &<>& &'exim_lock'& "lock a mailbox file" .endtable @@ -38858,6 +39622,10 @@ for remote hosts .next &'ratelimit'&: the data for implementing the ratelimit ACL condition .next +.new +&'tls'&: TLS session resumption data +.wen +.next &'misc'&: other hints data .endlist @@ -38875,7 +39643,7 @@ in a transport) -.section "exim_dumpdb" "SECID261" +.section "exim_dumpdb" "SECTdumpdb" .cindex "&'exim_dumpdb'&" The entire contents of a database are written to the standard output by the &'exim_dumpdb'& program, which has no options or arguments other than the @@ -38912,7 +39680,7 @@ cross-references. -.section "exim_tidydb" "SECID262" +.section "exim_tidydb" "SECTtidydb" .cindex "&'exim_tidydb'&" The &'exim_tidydb'& utility program is used to tidy up the contents of a hints database. If run with no options, it removes all records that are more than 30 @@ -38961,7 +39729,7 @@ databases is likely to keep on increasing. -.section "exim_fixdb" "SECID263" +.section "exim_fixdb" "SECTfixdb" .cindex "&'exim_fixdb'&" The &'exim_fixdb'& program is a utility for interactively modifying databases. Its main use is for testing Exim, but it might also be occasionally useful for @@ -40271,8 +41039,8 @@ There is no dot-stuffing (and no dot-termination). . //////////////////////////////////////////////////////////////////////////// . //////////////////////////////////////////////////////////////////////////// -.chapter "DKIM, SPF and DMARC" "CHAPdkim" &&& - "DKIM, SPF and DMARC Support" +.chapter "DKIM, SPF, SRS and DMARC" "CHAPdkim" &&& + "DKIM, SPF, SRS and DMARC Support" .section "DKIM (DomainKeys Identified Mail)" SECDKIM .cindex "DKIM" @@ -40347,7 +41115,7 @@ but for EC keys it is the base64 of the pure key; no ASN.1 wrapping. Signing is enabled by setting private options on the SMTP transport. These options take (expandable) strings as arguments. -.option dkim_domain smtp string list&!! unset +.option dkim_domain smtp "string list&!!" unset The domain(s) you want to sign with. After expansion, this can be a list. Each element in turn, @@ -40357,7 +41125,7 @@ while expanding the remaining signing options. If it is empty after expansion, DKIM signing is not done, and no error will result even if &%dkim_strict%& is set. -.option dkim_selector smtp string list&!! unset +.option dkim_selector smtp "string list&!!" unset This sets the key selector string. After expansion, which can use &$dkim_domain$&, this can be a list. Each element in turn is put in the expansion @@ -40366,6 +41134,15 @@ option along with &%$dkim_domain%&. If the option is empty after expansion, DKIM signing is not done for this domain, and no error will result even if &%dkim_strict%& is set. +.new +To do, for example, dual-signing with RSA and EC keys +this could be be used: +.code +dkim_selector = ec_sel : rsa_sel +dkim_private_key = KEYS_DIR/$dkim_selector +.endd +.wen + .option dkim_private_key smtp string&!! unset This sets the private key to use. You can use the &%$dkim_domain%& and @@ -40477,9 +41254,7 @@ When unspecified, the header names listed in RFC4871 will be used, whether or not each header is present in the message. The default list is available for the expansion in the macro &"_DKIM_SIGN_HEADERS"& -.new and an oversigning variant is in &"_DKIM_OVERSIGN_HEADERS"&. -.wen If a name is repeated, multiple headers by that name (or the absence thereof) will be signed. The textually later headers in the headers part of the @@ -40730,10 +41505,8 @@ Notes from the key record (tag n=). .vitem &%$dkim_key_length%& Number of bits in the key. -.new Valid only once the key is loaded, which is at the time the header signature is verified, which is after the body hash is. -.wen Note that RFC 8301 says: .code @@ -40757,10 +41530,10 @@ verb to a group of domains or identities. For example: .code # Warn when Mail purportedly from GMail has no gmail signature -warn log_message = GMail sender without gmail.com DKIM signature - sender_domains = gmail.com +warn sender_domains = gmail.com dkim_signers = gmail.com dkim_status = none + log_message = GMail sender without gmail.com DKIM signature .endd Note that the above does not check for a total lack of DKIM signing; @@ -40772,10 +41545,10 @@ results against the actual result of verification. This is typically used to restrict an ACL verb to a list of verification outcomes, for example: .code -deny message = Mail from Paypal with invalid/missing signature - sender_domains = paypal.com:paypal.de +deny sender_domains = paypal.com:paypal.de dkim_signers = paypal.com:paypal.de dkim_status = none:invalid:fail + message = Mail from Paypal with invalid/missing signature .endd The possible status keywords are: 'none','invalid','fail' and 'pass'. Please @@ -40859,13 +41632,16 @@ deny spf = fail message = $sender_host_address is not allowed to send mail from \ ${if def:sender_address_domain \ {$sender_address_domain}{$sender_helo_name}}. \ - Please see http://www.open-spf.org/Why?scope=\ - ${if def:sender_address_domain {mfrom}{helo}};\ + Please see http://www.open-spf.org/Why;\ identity=${if def:sender_address_domain \ {$sender_address}{$sender_helo_name}};\ ip=$sender_host_address .endd +Note: The above mentioned URL may not be as helpful as expected. You are +encouraged to replace the link with a link to a site with more +explanations. + When the spf condition has run, it sets up several expansion variables: @@ -40900,8 +41676,11 @@ variables: .vitem &$spf_smtp_comment$& .vindex &$spf_smtp_comment$& +.vindex &%spf_smtp_comment_template%& This contains a string that can be used in a SMTP response to the calling party. Useful for "fail". + The string is generated by the SPF library from the template configured in the main config + option &%spf_smtp_comment_template%&. .endlist @@ -40962,6 +41741,108 @@ The lookup will return the same result strings as can appear in +.section "SRS (Sender Rewriting Scheme)" SECTSRS +.cindex SRS "sender rewriting scheme" + +.new +SRS can be used to modify sender addresses when forwarding so that +SPF verification does not object to them. +It operates by encoding the original envelope sender in a new +sender local part and using a domain run by the forwarding site +as the new domain for the sender. Any DSN message should be returned +to this new sender at the forwarding site, which can extract the +original sender from the coded local part and forward the DSN to +the originator. + +This is a way of avoiding the breakage that SPF does to forwarding. +The constructed local-part will be longer than the original, +leading to possible problems with very long addresses. +The changing of the sender address also hinders the tracing of mail +problems. + +Exim can be built to include native SRS support. To do this +SUPPORT_SRS=yes must be defined in &_Local/Makefile_&. +If this has been done, the macros _HAVE_SRS and _HAVE_NATIVE_SRS +will be defined. +The support is limited to SRS0-encoding; SRS1 is not supported. + +.cindex SRS excoding +To encode an address use this expansion item: +.vlist +.vitem &*${srs_encode&~{*&<&'secret'&>&*}{*&<&'return&~path'&>&*}{*&<&'original&~domain'&>&*}}*& +.cindex "&%srs_encode%& expansion item" +.cindex SRS "expansion item" +The first argument should be a secret known and used by all systems +handling the recipient domain for the original message. +There is no need to periodically change this key; a timestamp is also +encoded. +The second argument should be given as the envelope sender address before this +encoding operation. +The third argument should be the recipient domain of the message when +it arrived at this system. +.endlist + +.cindex SRS decoding +To decode an address use this expansion condition: +.vlist +.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*& +The first argument should be the recipient local prt as is was received. +The second argument is the site secret. + +If the messages is not for an SRS-encoded recipient the condition will +return false. If it is, the condition will return true and the variable +&$srs_recipient$& will be set to the decoded (original) value. +.endlist + +Example usage: +.code + #macro + SRS_SECRET = + + #routers + + outbound: + driver = dnslookup + # if outbound, and forwarding has been done, use an alternate transport + domains = ! +my_domains + transport = ${if eq {$local_part@$domain} \ + {$original_local_part@$original_domain} \ + {remote_smtp} {remote_forwarded_smtp}} + + inbound_srs: + driver = redirect + senders = : + domains = +my_domains + # detect inbound bounces which are SRS'd, and decode them + condition = ${if inbound_srs {$local_part} {SRS_SECRET}} + data = $srs_recipient + + inbound_srs_failure: + driver = redirect + senders = : + domains = +my_domains + # detect inbound bounces which look SRS'd but are invalid + condition = ${if inbound_srs {$local_part} {}} + allow_fail + data = :fail: Invalid SRS recipient address + + #... further routers here + + + # transport; should look like the non-forward outbound + # one, plus the max_rcpt and return_path options + remote_forwarded_smtp: + driver = smtp + # modify the envelope from, for mails that we forward + max_rcpt = 1 + return_path = ${srs_encode {SRS_SECRET} {$return_path} {$original_domain}} +.endd + + +.wen + + + .section DMARC SECDMARC .cindex DMARC verification @@ -40996,10 +41877,8 @@ during domain parsing. Maintained by Mozilla, the most current version can be downloaded from a link at &url(https://publicsuffix.org/list/public_suffix_list.dat). See also the util/renew-opendmarc-tlds.sh script. -.new The default for the option is unset. If not set, DMARC processing is disabled. -.wen The &%dmarc_history_file%& option, if set @@ -41078,7 +41957,7 @@ mean, refer to the DMARC website above. Valid strings are: &'reject '& The DMARC check failed and the library recommends rejecting the email. &'quarantine '& The DMARC check failed and the library recommends keeping it for further inspection. &'none '& The DMARC check passed and the library recommends no specific action, neutral. -&'norecord '& No policy section in the DMARC record for this sender domain. +&'norecord '& No policy section in the DMARC record for this RFC5322.From field &'nofrom '& Unable to determine the domain of the sender. &'temperror '& Library error or dns error. &'off '& The DMARC check was disabled for this email. @@ -41242,7 +42121,8 @@ automatically determines which version is in use. The Proxy Protocol header is the first data received on a TCP connection and is inserted before any TLS-on-connect handshake from the client; Exim negotiates TLS between Exim-as-server and the remote client, not between -Exim and the proxy server. +Exim and the proxy server. The Proxy Protocol header must be received +within &%proxy_protocol_timeout%&, which defaults to 3s. The following expansion variables are usable (&"internal"& and &"external"& here refer to the interfaces @@ -41274,8 +42154,8 @@ A possible solution is: # Or do some kind of IP lookup in a flat file or database # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}} - defer message = Too many connections from this IP right now - ratelimit = LIMIT / 5s / per_conn / strict + defer ratelimit = LIMIT / 5s / per_conn / strict + message = Too many connections from this IP right now .endd @@ -41371,6 +42251,7 @@ requirement, upon libidn2. .section "MTA operations" SECTi18nMTA .cindex SMTPUTF8 "ESMTP option" +.cindex "ESMTP extensions" SMTPUTF8 The main configuration option &%smtputf8_advertise_hosts%& specifies a host list. If this matches the sending host and accept_8bitmime is true (the default) then the ESMTP option @@ -41417,22 +42298,27 @@ may use the following modifier: control = utf8_downconvert control = utf8_downconvert/ .endd -This sets a flag requiring that addresses are converted to -a-label form before smtp delivery, for use in a -Message Submission Agent context. +This sets a flag requiring that envelope addresses are converted to +a-label form before smtp delivery. +This is usually for use in a Message Submission Agent context, +but could be used for any message. + If a value is appended it may be: .display -&`1 `& (default) mandatory downconversion +&`1 `& mandatory downconversion &`0 `& no downconversion &`-1 `& if SMTPUTF8 not supported by destination host .endd +If no value is given, 1 is used. If mua_wrapper is set, the utf8_downconvert control is initially set to -1. The smtp transport has an option &%utf8_downconvert%&. If set it must expand to one of the three values described above, -and it overrides any previously set value. +or an empty string. +If non-empty it overrides value previously set +(due to mua_wrapper or by an ACL control). There is no explicit support for VRFY and EXPN. @@ -41522,9 +42408,7 @@ Events have names which correspond to the point in process at which they fire. The name is placed in the variable &$event_name$& and the event action expansion must check this, as it will be called for every possible event type. -.new The current list of events is: -.wen .display &`dane:fail after transport `& per connection &`msg:complete after main `& per message