Fix bug 1267 - inlist/i were ignoring negation.

[users/heiko/exim.git] / doc / doc-docbook / spec.xfpt

diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
index 675d3f9561a95087403bba3baa1f342585bfafd6..eb359d0882783ac5e0937c870e652be0f99ed7ec 100644 (file)
--- a/doc/doc-docbook/spec.xfpt
+++ b/doc/doc-docbook/spec.xfpt
@@ -5369,7 +5369,7 @@ it is unset, Exim uses the &[uname()]& system function to obtain the host name.
 
 The first three non-comment configuration lines are as follows:
 .code
 
 The first three non-comment configuration lines are as follows:
 .code

-domainlist local_domains = @
+domainlist local_domains    = @

 domainlist relay_to_domains =
 hostlist   relay_from_hosts = 127.0.0.1
 .endd
 domainlist relay_to_domains =
 hostlist   relay_from_hosts = 127.0.0.1
 .endd


@@ -5711,7 +5711,7 @@ examples described in &<<SECTdefconfauth>>&. This means that no client can in
 fact authenticate until you complete the authenticator definitions.
 .code
 require message = relay not permitted
 fact authenticate until you complete the authenticator definitions.
 .code
 require message = relay not permitted

-        domains = +local_domains : +relay_domains
+        domains = +local_domains : +relay_to_domains

 .endd
 This statement rejects the address if its domain is neither a local domain nor
 one of the domains for which this host is a relay.
 .endd
 This statement rejects the address if its domain is neither a local domain nor
 one of the domains for which this host is a relay.


@@ -7485,7 +7485,7 @@ ${lookup sqlite {/some/thing/sqlitedb \
 .endd
 In a list, the syntax is similar. For example:
 .code
 .endd
 In a list, the syntax is similar. For example:
 .code

-domainlist relay_domains = sqlite;/some/thing/sqlitedb \
+domainlist relay_to_domains = sqlite;/some/thing/sqlitedb \

    select * from relays where ip='$sender_host_address';
 .endd
 The only character affected by the &%quote_sqlite%& operator is a single
    select * from relays where ip='$sender_host_address';
 .endd
 The only character affected by the &%quote_sqlite%& operator is a single


@@ -7567,13 +7567,13 @@ subject is not in the set. If the end of the list is reached without the
 subject having matched any of the patterns, it is in the set if the last item
 was a negative one, but not if it was a positive one. For example, the list in
 .code
 subject having matched any of the patterns, it is in the set if the last item
 was a negative one, but not if it was a positive one. For example, the list in
 .code

-domainlist relay_domains = !a.b.c : *.b.c
+domainlist relay_to_domains = !a.b.c : *.b.c

 .endd
 matches any domain ending in &'.b.c'& except for &'a.b.c'&. Domains that match
 neither &'a.b.c'& nor &'*.b.c'& do not match, because the last item in the
 list is positive. However, if the setting were
 .code
 .endd
 matches any domain ending in &'.b.c'& except for &'a.b.c'&. Domains that match
 neither &'a.b.c'& nor &'*.b.c'& do not match, because the last item in the
 list is positive. However, if the setting were
 .code

-domainlist relay_domains = !a.b.c
+domainlist relay_to_domains = !a.b.c

 .endd
 then all domains other than &'a.b.c'& would match because the last item in the
 list is negative. In other words, a list that ends with a negative item behaves
 .endd
 then all domains other than &'a.b.c'& would match because the last item in the
 list is negative. In other words, a list that ends with a negative item behaves


@@ -7677,7 +7677,7 @@ the words &%domainlist%&, &%hostlist%&, &%addresslist%&, or &%localpartlist%&,
 respectively. Then there follows the name that you are defining, followed by an
 equals sign and the list itself. For example:
 .code
 respectively. Then there follows the name that you are defining, followed by an
 equals sign and the list itself. For example:
 .code

-hostlist    relay_hosts = 192.168.23.0/24 : my.friend.example
+hostlist    relay_from_hosts = 192.168.23.0/24 : my.friend.example

 addresslist bad_senders = cdb;/etc/badsenders
 .endd
 A named list may refer to other named lists:
 addresslist bad_senders = cdb;/etc/badsenders
 .endd
 A named list may refer to other named lists:


@@ -8758,6 +8758,23 @@ string easier to understand.
 This item inserts &"basic"& header lines. It is described with the &%header%&
 expansion item below.
 
 This item inserts &"basic"& header lines. It is described with the &%header%&
 expansion item below.
 

+
+.vitem "&*${acl{*&<&'name'&>&*}{*&<&'arg'&>&*}...}*&"
+.cindex "expansion" "calling an acl"
+.cindex "&%acl%&" "call from expansion"
+The name and zero to nine argument strings are first expanded separately.  The expanded
+arguments are assigned to the variables &$acl_arg1$& to &$acl_arg9$& in order.
+Any unused are made empty.  The variable &$acl_narg$& is set to the number of
+arguments.  The named ACL (see chapter &<<CHAPACL>>&) is called
+and may use the variables; if another acl expansion is used the values
+are overwritten.  If the ACL sets
+a value using a "message =" modifier and returns accept or deny, the value becomes
+the result of the expansion.
+If no message was set and the ACL returned accept or deny
+the value is an empty string.
+If the ACL returned defer the result is a forced-fail.  Otherwise the expansion fails.
+
+

 .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&&
        {*&<&'arg'&>&*}...}*&"
 .cindex &%dlfunc%&
 .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&&
        {*&<&'arg'&>&*}...}*&"
 .cindex &%dlfunc%&


@@ -10043,6 +10060,21 @@ In all cases, a relative comparator OP is testing if <&'string1'&> OP
 10M, not if 10M is larger than &$message_size$&.
 
 
 10M, not if 10M is larger than &$message_size$&.
 
 

+.vitem &*acl&~{{*&<&'name'&>&*}{*&<&'arg1'&>&*}&&&
+       {*&<&'arg2'&>&*}...}*&
+.cindex "expansion" "calling an acl"
+.cindex "&%acl%&" "expansion condition"
+The name and zero to nine argument strings are first expanded separately.  The expanded
+arguments are assigned to the variables &$acl_arg1$& to &$acl_arg9$& in order.
+Any unused are made empty.  The variable &$acl_narg$& is set to the number of
+arguments.  The named ACL (see chapter &<<CHAPACL>>&) is called
+and may use the variables; if another acl expansion is used the values
+are overwritten.  If the ACL sets
+a value using a "message =" modifier the variable $value becomes
+the result of the expansion, otherwise it is empty.
+If the ACL returns accept the condition is true; if deny, false.
+If the ACL returns defer the result is a forced-fail.
+

 .vitem &*bool&~{*&<&'string'&>&*}*&
 .cindex "expansion" "boolean parsing"
 .cindex "&%bool%& expansion condition"
 .vitem &*bool&~{*&<&'string'&>&*}*&
 .cindex "expansion" "boolean parsing"
 .cindex "&%bool%& expansion condition"


@@ -12825,6 +12857,9 @@ listed in more than one group.
 .section "TLS" "SECID108"
 .table2
 .row &%gnutls_compat_mode%&          "use GnuTLS compatibility mode"
 .section "TLS" "SECID108"
 .table2
 .row &%gnutls_compat_mode%&          "use GnuTLS compatibility mode"

+.new
+.row &%gnutls_enable_pkcs11%&        "allow GnuTLS to autoload PKCS11 modules"
+.wen

 .row &%openssl_options%&             "adjust OpenSSL compatibility options"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"
 .row &%openssl_options%&             "adjust OpenSSL compatibility options"
 .row &%tls_advertise_hosts%&         "advertise TLS to these hosts"
 .row &%tls_certificate%&             "location of server certificate"


@@ -13853,6 +13888,19 @@ This option controls whether GnuTLS is used in compatibility mode in an Exim
 server. This reduces security slightly, but improves interworking with older
 implementations of TLS.
 
 server. This reduces security slightly, but improves interworking with older
 implementations of TLS.
 

+
+.new
+option gnutls_enable_pkcs11 main boolean unset
+This option will let GnuTLS (2.12.0 or later) autoload PKCS11 modules with
+the p11-kit configuration files in &_/etc/pkcs11/modules/_&.
+
+See
+&url(http://www.gnu.org/software/gnutls/manual/gnutls.html#Smart-cards-and-HSMs)
+for documentation.
+.wen
+
+
+

 .option headers_charset main string "see below"
 This option sets a default character set for translating from encoded MIME
 &"words"& in header lines, when referenced by an &$h_xxx$& expansion item. The
 .option headers_charset main string "see below"
 This option sets a default character set for translating from encoded MIME
 &"words"& in header lines, when referenced by an &$h_xxx$& expansion item. The


@@ -15188,7 +15236,7 @@ live with.
 . Allow this long option name to split; give it unsplit as a fifth argument
 . for the automatic .oindex that is generated by .option.
 
 . Allow this long option name to split; give it unsplit as a fifth argument
 . for the automatic .oindex that is generated by .option.
 

-.option "smtp_accept_max_per_ &~&~connection" main integer 1000 &&&
+.option "smtp_accept_max_per_connection" main integer 1000 &&&

          smtp_accept_max_per_connection
 .cindex "SMTP" "limiting incoming message count"
 .cindex "limit" "messages per SMTP connection"
          smtp_accept_max_per_connection
 .cindex "SMTP" "limiting incoming message count"
 .cindex "limit" "messages per SMTP connection"


@@ -27285,6 +27333,7 @@ The conditions are as follows:
 .vitem &*acl&~=&~*&<&'name&~of&~acl&~or&~ACL&~string&~or&~file&~name&~'&>
 .cindex "&ACL;" "nested"
 .cindex "&ACL;" "indirect"
 .vitem &*acl&~=&~*&<&'name&~of&~acl&~or&~ACL&~string&~or&~file&~name&~'&>
 .cindex "&ACL;" "nested"
 .cindex "&ACL;" "indirect"

+.cindex "&ACL;" "arguments"

 .cindex "&%acl%& ACL condition"
 The possible values of the argument are the same as for the
 &%acl_smtp_%&&'xxx'& options. The named or inline ACL is run. If it returns
 .cindex "&%acl%& ACL condition"
 The possible values of the argument are the same as for the
 &%acl_smtp_%&&'xxx'& options. The named or inline ACL is run. If it returns


@@ -27294,6 +27343,10 @@ condition is on a &%warn%& verb. In that case, a &"defer"& return makes the
 condition false. This means that further processing of the &%warn%& verb
 ceases, but processing of the ACL continues.
 
 condition false. This means that further processing of the &%warn%& verb
 ceases, but processing of the ACL continues.
 

+If the argument is a named ACL, up to nine space-separated optional values
+can be appended; they appear in $acl_arg1 to $acl_arg9, and $acl_narg is set
+to the count of values.  The name and values are expanded separately.
+

 If the nested &%acl%& returns &"drop"& and the outer condition denies access,
 the connection is dropped. If it returns &"discard"&, the verb must be
 &%accept%& or &%discard%&, and the action is taken immediately &-- no further
 If the nested &%acl%& returns &"drop"& and the outer condition denies access,
 the connection is dropped. If it returns &"discard"&, the verb must be
 &%accept%& or &%discard%&, and the action is taken immediately &-- no further


@@ -29052,16 +29105,16 @@ Suppose your LAN is 192.168.45.0/24.
 
 In the main part of the configuration, you put the following definitions:
 .code
 
 In the main part of the configuration, you put the following definitions:
 .code

-domainlist local_domains = my.dom1.example : my.dom2.example
-domainlist relay_domains = friend1.example : friend2.example
-hostlist   relay_hosts   = 192.168.45.0/24
+domainlist local_domains    = my.dom1.example : my.dom2.example
+domainlist relay_to_domains = friend1.example : friend2.example
+hostlist   relay_from_hosts = 192.168.45.0/24

 .endd
 Now you can use these definitions in the ACL that is run for every RCPT
 command:
 .code
 acl_check_rcpt:
 .endd
 Now you can use these definitions in the ACL that is run for every RCPT
 command:
 .code
 acl_check_rcpt:

-  accept domains = +local_domains : +relay_domains
-  accept hosts   = +relay_hosts
+  accept domains = +local_domains : +relay_to_domains
+  accept hosts   = +relay_from_hosts

 .endd
 The first statement accepts any RCPT command that contains an address in
 the local or relay domains. For any other domain, control passes to the second
 .endd
 The first statement accepts any RCPT command that contains an address in
 the local or relay domains. For any other domain, control passes to the second