nit: document that `fout` must be open for reading too

[users/heiko/exim.git] / doc / doc-src / FAQ.src

diff --git a/doc/doc-src/FAQ.src b/doc/doc-src/FAQ.src
index 461b1a608c0d133339a5f9740437762116af767e..1d43cbcd251ad1e0191acd428fd7b225db815844 100644 (file)
--- a/doc/doc-src/FAQ.src
+++ b/doc/doc-src/FAQ.src
@@ -1,4 +1,3 @@
-## $Cambridge: exim/doc/doc-src/FAQ.src,v 1.8 2009/11/05 19:37:00 nm4 Exp $

 ##
 ## This file is processed by Perl scripts to produce an ASCII and an HTML
 ## version. Lines starting with ## are omitted. The markup used with paragraphs
 ##
 ## This file is processed by Perl scripts to produce an ASCII and an HTML
 ## version. Lines starting with ## are omitted. The markup used with paragraphs


@@ -851,7 +850,7 @@ A0044: Exim has been unable to create a file in its spool area in which to
 
        If you are running Exim with an alternate configuration file using a
        command such as \"exim -C altconfig..."\, remember that the use of -C
 
        If you are running Exim with an alternate configuration file using a
        command such as \"exim -C altconfig..."\, remember that the use of -C

-       takes away Exim's root privilege, unless \\TRUSTED_CONFIG_PREFIX_FILE\\
+       takes away Exim's root privilege, unless \\TRUSTED_CONFIG_LIST\\

        is set in \(Local/Makefile)\ and the corresponding file contains a
        prefix which matches the alternative configuration file being used.
 
        is set in \(Local/Makefile)\ and the corresponding file contains a
        prefix which matches the alternative configuration file being used.
 


@@ -913,7 +912,7 @@ A0047: \-bz-\ is a Sendmail option requesting it to create a `configuration free
 
 ==>      /usr/lib/sendmail -bz
 
 
 ==>      /usr/lib/sendmail -bz
 

-       in some start-up script (e.g. \(/etc/init.d/mail)\) immedately before
+       in some start-up script (e.g. \(/etc/init.d/mail)\) immediately before

 
 ==>      /usr/lib/sendmail -bd -q15m
 
 
 ==>      /usr/lib/sendmail -bd -q15m
 


@@ -1155,7 +1154,7 @@ A0065: When Exim is called with -C, it passes on -C to any instances of itself
        includes the case where Exim re-execs itself to regain root privilege.
        Thus it can't write to the spool.
 
        includes the case where Exim re-execs itself to regain root privilege.
        Thus it can't write to the spool.
 

-       The fix for this is to use the \\TRUSTED_CONFIG_PREFIX_LIST\\ build-time
+       The fix for this is to use the \\TRUSTED_CONFIG_LIST\\ build-time

        option. This defines a file containing a list of 'trusted' prefixes for
        configuration files. Any configuration file specified with -C, if it
        matches a prefix listed in that file, will be used without dropping root
        option. This defines a file containing a list of 'trusted' prefixes for
        configuration files. Any configuration file specified with -C, if it
        matches a prefix listed in that file, will be used without dropping root


@@ -2118,7 +2117,7 @@ A0301: They mean exactly what they say. Exim expected to route an address to a
        with MX records pointing to \"localhost"\ (or other names with A records
        that specify 127.0.0.1), which causes this behaviour. You can use the
        \ignore_target_hosts\ option to get Exim to ignore these records. The
        with MX records pointing to \"localhost"\ (or other names with A records
        that specify 127.0.0.1), which causes this behaviour. You can use the
        \ignore_target_hosts\ option to get Exim to ignore these records. The

-       default contiguration does this. For more discussion, see Q0319. For
+       default configuration does this. For more discussion, see Q0319. For

        other cases:
 
        (1) If the domain is meant to be handled as a local domain, there
        other cases:
 
        (1) If the domain is meant to be handled as a local domain, there


@@ -2317,7 +2316,7 @@ A0310: If a DNS lookup returns no MXs, Exim looks for an address record, in
 
 
 Q0311: When a DNS lookup for MX records fails to complete, why doesn't Exim
 
 
 Q0311: When a DNS lookup for MX records fails to complete, why doesn't Exim

-       send the messsage to the host defined by the A record?
+       send the message to the host defined by the A record?

 
 A0311: The RFCs are quite clear on this. Only if it is known that there are no
        MX records is an MTA allowed to make use of the A record. When an MX
 
 A0311: The RFCs are quite clear on this. Only if it is known that there are no
        MX records is an MTA allowed to make use of the A record. When an MX


@@ -3453,7 +3452,7 @@ A0510: \^elspy^\ is a layer of glue code that enables you to write Python code
        to scan email messages at SMTP time. \^elspy^\ also includes a small
        Python library with common mail-scanning tools, including an interface
        to SpamAssassin and a simple but effective virus detector. You can
        to scan email messages at SMTP time. \^elspy^\ also includes a small
        Python library with common mail-scanning tools, including an interface
        to SpamAssassin and a simple but effective virus detector. You can

-       optain \^elspy^\ from \?http://elspy.sourceforge.net/?\.
+       obtain \^elspy^\ from \?http://elspy.sourceforge.net/?\.

 
 
 Q0511: Whenever my system filter uses a \mail\ command to send a message, I get
 
 
 Q0511: Whenever my system filter uses a \mail\ command to send a message, I get


@@ -3544,7 +3543,7 @@ A0601: Whenever Exim does a local delivery, it runs a process under a specific
 ==>      majordomo: |/local/mail/majordomo ...
 
        then Exim has to be told what uid/gid to use for the delivery. This can
 ==>      majordomo: |/local/mail/majordomo ...
 
        then Exim has to be told what uid/gid to use for the delivery. This can

-       be done either on the routerr that handles the address, or on the
+       be done either on the router that handles the address, or on the

        transport that actually does the delivery. If a pipe is going to run a
        setuid program, then it doesn't matter what uid Exim starts it out with,
        and so the most straightforward thing is to put
        transport that actually does the delivery. If a pipe is going to run a
        setuid program, then it doesn't matter what uid Exim starts it out with,
        and so the most straightforward thing is to put


@@ -3618,7 +3617,7 @@ A0603: Q0601 contains background information on this. If you are using, say, an
 
 
 Q0604: I want to use MMDF-style mailboxes. How can I get Exim to append the
 
 
 Q0604: I want to use MMDF-style mailboxes. How can I get Exim to append the

-       ctrl-A characters that separate indvidual emails?
+       ctrl-A characters that separate individual emails?

 
 A0604: Set the \message_suffix\ option in the \%appendfile%\ transport. In fact,
        for MMDF mailboxes you need a prefix as well as a suffix to get it
 
 A0604: Set the \message_suffix\ option in the \%appendfile%\ transport. In fact,
        for MMDF mailboxes you need a prefix as well as a suffix to get it


@@ -3661,7 +3660,7 @@ Q0606: I'm using tmail to do local deliveries, but when I turned on the
        \use_crlf\ option on the \%pipe%\ transport (tmail prefers \"@\r@\n"\
        terminations) message bodies started to vanish.
 
        \use_crlf\ option on the \%pipe%\ transport (tmail prefers \"@\r@\n"\
        terminations) message bodies started to vanish.
 

-A0606: You need to unset the \mesage_prefix\ option, or change it so that its
+A0606: You need to unset the \message_prefix\ option, or change it so that its

        default \"@\n"\ terminator becomes \"@\r@\n"\. For example, the
        transport could be:
 
        default \"@\n"\ terminator becomes \"@\r@\n"\. For example, the
        transport could be:
 


@@ -5039,7 +5038,7 @@ A0806: The value of \$domain$\ is the actual domain that appears in the address.
        but it is important to some people - especially if by some unfortunate
        accident the lowercased word is something indecent.
 
        but it is important to some people - especially if by some unfortunate
        accident the lowercased word is something indecent.
 

-       You can trivally force lower casing by means of the \"${lc:"\ operator.
+       You can trivially force lower casing by means of the \"${lc:"\ operator.

        Instead of \"$domain"\ write \"${lc:$domain}"\.
 
 
        Instead of \"$domain"\ write \"${lc:$domain}"\.
 
 


@@ -5100,7 +5099,7 @@ A0905: You can only do this in a round about way, using filter commands like
 
 ==>      headers add "New-Subject: SPAM: $h_subject:"
          headers remove subject
 
 ==>      headers add "New-Subject: SPAM: $h_subject:"
          headers remove subject

-         neaders add "Subject: $h_new-subject:"
+         headers add "Subject: $h_new-subject:"

          headers remove new-subject
 
        This trick works only in system filters, where the commands are obeyed
          headers remove new-subject
 
        This trick works only in system filters, where the commands are obeyed