$Cambridge: exim/doc/doc-docbook/HowItWorks.txt,v 1.4 2006/04/04 14:03:49 ph10 Exp $ CREATING THE EXIM DOCUMENTATION "You are lost in a maze of twisty little scripts." This document describes how the various versions of the Exim documentation, in different output formats, are created from DocBook XML, and also how the DocBook XML is itself created. BACKGROUND: THE OLD WAY From the start of Exim, in 1995, the specification was written in a local text formatting system known as SGCAL. This is capable of producing PostScript and plain text output from the same source file. Later, when the "ps2pdf" command became available with GhostScript, that was used to create a PDF version from the PostScript. (A few earlier versions were created by a helpful user who had bought the Adobe distiller software.) A demand for a version in "info" format led me to write a Perl script that converted the SGCAL input into a Texinfo file. Because of the somewhat restrictive requirements of Texinfo, this script has always needed a lot of maintenance, and was never totally satisfactory. The HTML version of the documentation was originally produced from the Texinfo version, but later I wrote another Perl script that produced it directly from the SGCAL input, which made it possible to produce better HTML. There were a small number of diagrams in the documentation. For the PostScript and PDF versions, these were created using Aspic, a local text-driven drawing program that interfaces directly to SGCAL. For the text and texinfo versions, alternative ascii-art diagrams were used. For the HTML version, screen shots of the PostScript output were turned into gifs. A MORE STANDARD APPROACH Although in principle SGCAL and Aspic could be generally released, they would be unlikely to receive much (if any) maintenance, especially after I retire. Furthermore, the old production method was only semi-automatic; I still did a certain amount of hand tweaking of spec.txt, for example. As the maintenance of Exim itself was being opened up to a larger group of people, it seemed sensible to move to a more standard way of producing the documentation, preferable fully automated. However, we wanted to use only non-commercial software to do this. At the time I was thinking about converting (early 2005), the "obvious" standard format in which to keep the documentation was DocBook XML. The use of XML in general, in many different applications, was increasing rapidly, and it seemed likely to remain a standard for some time to come. DocBook offered a particular form of XML suited to documents that were effectively "books". Maintaining an XML document by hand editing is a tedious, verbose, and error-prone process. A number of specialized XML text editors were available, but all the free ones were at a very primitive stage. I therefore decided to keep the master source in AsciiDoc format, from which a secondary XML master could be automatically generated. The first "new" versions of the documents, for the 4.60 release, were generated this way. However, there were a number of problems with using AsciiDoc for a document as large and as complex as the Exim manual. As a result, I wrote a new application called xfpt ("XML From Plain Text") which creates XML from a relatively simple and consistent markup language. This application has been released for general use, and the master sources for the Exim documentation are now in xfpt format. All the output formats are generated from the XML file. If, in the future, a better way of maintaining the XML source becomes available, this can be adopted without changing any of the processing that produces the output documents. Equally, if better ways of processing the XML become available, they can be adopted without affecting the source maintenance. A number of issues arose while setting this all up, which are best summed up by the statement that a lot of the technology is (in 2006) still very immature. It is probable that trying to do this conversion any earlier would not have been anywhere near as successful. The main problems that still bother me are described in the penultimate section of this document. The following sections describe the processes by which the xfpt files are transformed into the final output documents. In practice, the details are coded into a Makefile that specifies the chain of commands for each output format. REQUIRED SOFTWARE Installing software to process XML puts lots and lots of stuff on your box. I run Gentoo Linux, and a lot of things have been installed as dependencies that I am not fully aware of. This is what I know about (version numbers are current at the time of writing): . xfpt 0.00 This converts the master source file into a DocBook XML file. . xmlto 0.0.18 This is a shell script that drives various XML processors. It is used to produce "formatted objects" for PostScript and PDF output, and to produce HTML output. It uses xsltproc, libxml, libxslt, libexslt, and possibly other things that I have not figured out, to apply the DocBook XSLT stylesheets. . libxml 1.8.17 libxml2 2.6.22 libxslt 1.1.15 These are all installed on my box; I do not know which of libxml or libxml2 the various scripts are actually using. . xsl-stylesheets-1.68.1 These are the standard DocBook XSL stylesheets. . fop 0.20.5 FOP is a processor for "formatted objects". It is written in Java. The fop command is a shell script that drives it. It is used to generate PostScript and PDF output. . w3m 0.5.1 This is a text-oriented web brower. It is used to produce the Ascii form of the Exim documentation (spec.txt) from a specially-created HTML format. It seems to do a better job than lynx. . docbook2texi (part of docbook2X 0.8.5) This is a wrapper script for a two-stage conversion process from DocBook to a Texinfo file. It uses db2x_xsltproc and db2x_texixml. Unfortunately, there are two versions of this command; the old one is based on an earlier fork of docbook2X and does not work. . db2x_xsltproc and db2x_texixml (part of docbook2X 0.8.5) More wrapping scripts (see previous item). . makeinfo 4.8 This is used to make a set of "info" files from a Texinfo file. In addition, there are a number of locally written Perl scripts. These are described below. THE MAKEFILE The makefile supports a number of targets of the form x.y, where x is one of "filter", "spec", or "test", and y is one of "xml", "fo", "ps", "pdf", "html", "txt", or "info". The intermediate targets "x.xml" and "x.fo" are provided for testing purposes. The other five targets are production targets. For example: make spec.pdf This runs the necessary tools in order to create the file spec.pdf from the original source spec.xfpt. A number of intermediate files are created during this process, including the master DocBook source, called spec.xml. Of course, the usual features of "make" ensure that if this already exists and is up-to-date, it is not needlessly rebuilt. The "test" series of targets were created so that small tests could easily be run fairly quickly, because processing even the shortish XML document takes a bit of time, and processing the main specification takes ages. Another target is "exim.8". This runs a locally written Perl script called x2man, which extracts the list of command line options from the spec.xml file, and creates a man page. There are some XML comments in the spec.xml file to enable the script to find the start and end of the options list. There is also a "clean" target that deletes all the generated files. CREATING DOCBOOK XML FROM XFPT INPUT The small amount of local configuration for xfpt is included at the start of the two .xfpt files; there are no separate local xfpt configuration files. Running the xfpt command creates a .xml file from a .xfpt file. When this succeeds, there is no output. DOCBOOK PROCESSING Processing a .xml file into the five different output formats is not entirely straightforward. For a start, the same XML is not suitable for all the different output styles. When the final output is in a text format (.txt, .texinfo) for instance, all non-Ascii characters in the input must be converted to Ascii transliterations because the current processing tools do not do this correctly automatically. In order to cope with these issues in a flexible way, a Perl script called Pre-xml was written. This is used to preprocess the .xml files before they are handed to the main processors. Adding one more tool onto the front of the processing chain does at least seem to be in the spirit of XML processing. The XML processors themselves make use of style files, which can be overridden by local versions. There is one that applies to all styles, called MyStyle.xsl, and others for the different output formats. I have included comments in these style files to explain what changes I have made. Some of the changes are quite significant. THE PRE-XML SCRIPT The Pre-xml script copies a .xml file, making certain changes according to the options it is given. The currently available options are as follows: -ascii This option is used for Ascii output formats. It makes the following character replacements: ’ => ' apostrophe © => (c) copyright † => * dagger ‡ => ** double dagger   => a space hard space – => - en dash The apostrophe is specified numerically because that is what xfpt generates from an Ascii single quote character. Non-Ascii characters that are not in this list should not be used without thinking about how they might be converted for the Ascii formats. In addition to the character replacements, this option causes quotes to be put round text items, and and to be replaced by Ascii quote marks. You would think the stylesheet would cope with the latter, but it seems to generate non-Ascii characters that w3m then turns into question marks. -bookinfo This option causes the element to be removed from the XML. It is used for the PostScript/PDF forms of the filter document, in order to avoid the generation of a full title page. -fi Replace any occurrence of "fi" by the ligature fi except when it is inside an XML element, or inside a part of the text. The use of ligatures would be nice for the PostScript and PDF formats. Sadly, it turns out that fop cannot at present handle the FB01 character correctly. The only format that does so is the HTML format, but when I used this in the test version, people complained that it made searching for words difficult. So at the moment, this option is not used. :-( -noindex Remove the XML to generate a Concept Index and an Options index. The source document has two types of index entry, for a concept and an options index. However, no index is required for the .txt and .texinfo outputs. -oneindex Remove the XML to generate a Concept and an Options Index, and add XML to generate a single index. The only output processor that supports multiple indexes is the processor that produces "formatted objects" for PostScript and PDF output. The HTML processor ignores the XML settings for multiple indexes and just makes one unified index. Specifying two indexes gets you two copies of the same index, so this has to be changed. -optbreak Look for items of the form and ... in ordinary paragraphs, and insert ​ after each underscore in the enclosed text. The same is done for any word containing four or more upper case letters (compile-time options in the Exim specification). The character ​ is a zero-width space. This means that the line may be split after one of these underscores, but no hyphen is inserted. CREATING POSTSCRIPT AND PDF These two output formats are created in three stages, with an additional fourth stage for PDF. First, the XML is pre-processed by the Pre-xml script. For the filter document, the element is removed so that no title page is generated. For the main specification, the only change is to insert line breakpoints via -optbreak. Second, the xmlto command is used to produce a "formatted objects" (.fo) file. This process uses the following stylesheets: (1) Either MyStyle-filter-fo.xsl or MyStyle-spec-fo.xsl (2) MyStyle-fo.xsl (3) MyStyle.xsl (4) MyTitleStyle.xsl The last of these is not used for the filter document, which does not have a title page. The first three stylesheets were created manually, either by typing directly, or by coping from the standard style sheet and editing. The final stylesheet has to be created from a template document, which is called MyTitlepage.templates.xml. This was copied from the standard styles and modified. The template is processed with xsltproc to produce the stylesheet. All this apparatus is appallingly heavyweight. The processing is also very slow in the case of the specification document. However, there should be no errors. The reference book that saved my life while I was trying to get all this to work is "DocBook XSL, The Complete Guide", third edition (2005), by Bob Stayton, published by Sagehill Enterprises. In the third part of the processing, the .fo file that is produced by the xmlto command is processed by the fop command to generate either PostScript or PDF. This is also very slow, and you get a whole slew of errors, of which these are a sample: [ERROR] property - "background-position-horizontal" is not implemented yet. [ERROR] property - "background-position-vertical" is not implemented yet. [INFO] JAI support was not installed (read: not present at build time). Trying to use Jimi instead Error creating background image: Error creating FopImage object (Error creating FopImage object (http://docbook.sourceforge.net/release/images/draft.png) : org.apache.fop.image.JimiImage [WARNING] table-layout=auto is not supported, using fixed! [ERROR] Unknown enumerated value for property 'span': inherit [ERROR] Error in span property value 'inherit': org.apache.fop.fo.expr.PropertyException: No conversion defined [ERROR] Areas pending, text probably lost in lineinclude parts matched in the response by response_pattern by means of numeric variables such as The last one is particularly meaningless gobbledegook. Some of the errors and warnings are repeated many times. Nevertheless, it does eventually produce usable output, though I have a number of issues with it (see a later section of this document). Maybe one day there will be a new release of fop that does better (there are now signs - February 2006 - that this may be happening). Maybe there will be some other means of producing PostScript and PDF from DocBook XML. Maybe porcine aeronautics will really happen. The PDF file that is produced by this process has one problem: the pages, as shown by acroread in its thumbnail display, are numbered sequentially from one to the end. Those numbers do not correspond with the page numbers of the body of the document, which makes finding a page from the index awkward. There is a facility in the PDF format to give pages appropriate "labels", but I cannot find a way of persuading fop to generate these. Fortunately, it is possibly to fix up the PDF to add page labels. I wrote a script called PageLabelPDF which does this. They are shown correctly by acroread, but not by GhostScript (gv). THE PAGELABELPDF SCRIPT This script reads the standard input and writes the standard output. It searches for the PDF object that sets data in its "Catalog", and adds appropriate information about page labels. The number of front-matter pages (those before chapter 1) is hard-wired into this script as 12 because I could not find a way of determining it automatically. As the current table of contents finishes near the top of the 11th page, there is plenty of room for expansion, so it is unlikely to be a problem. Having added data to the PDF file, the script then finds the xref table at the end of the file, and adjusts its entries to allow for the added text. This simple processing seems to be enough to generate a new, valid, PDF file. CREATING HTML Only two stages are needed to produce HTML, but the main specification is subsequently postprocessed. The Pre-xml script is called with the -optbreak and -oneindex options to preprocess the XML. Then the xmlto command creates the HTML output directly. For the specification document, a directory of files is created, whereas the filter document is output as a single HTML page. The following stylesheets are used: (1) Either MyStyle-chunk-html.xsl or MyStyle-nochunk-html.xsl (2) MyStyle-html.xsl (3) MyStyle.xsl The first stylesheet references the chunking or non-chunking standard DocBook stylesheet, as appropriate. You may see a number of these errors when creating HTML: "Revisionflag on unexpected element: literallayout (Assuming block)". They seem to be harmless; the output appears to be what is intended. The original HTML that I produced from the SGCAL input had hyperlinks back from chapter and section titles to the table of contents. These links are not generated by xmlto. One of the testers pointed out that the lack of these links, or simple self-referencing links for titles, makes it harder to copy a link name into, for example, a mailing list response. I could not find where to fiddle with the stylesheets to make such a change, if indeed the stylesheets are capable of it. Instead, I wrote a Perl script called TidyHTML-spec to do the job for the specification document. It updates the index.html file (which contains the the table of contents) setting up anchors, and then updates all the chapter files to insert appropriate links. The index.html file as built by xmlto contains the whole table of contents in a single line, which makes is hard to debug by hand. Since I was postprocessing it anyway, I arranged to insert newlines after every '>' character. The TidyHTML-spec script also processes every HTML file, to tidy up some of the untidy features therein. It turns

into

and a matching

into
to get rid of unwanted vertical white space in literallayout blocks. Before each occurrence of it inserts   so that the table's cell is a little bit wider than the text itself. The TidyHTML-spec script also takes the opportunity to postprocess the spec_html/ix01.html file, which contains the document index. Again, the index is generated as one single line, so it splits it up. Then it creates a list of letters at the top of the index and hyperlinks them both ways from the different letter portions of the index. People wanted similar postprocessing for the filter.html file, so that is now done using a similar script called TidyHTML-filter. It was easier to use a separate script because filter.html is a single file rather than a directory, so the logic is somewhat different. CREATING TEXT FILES This happens in four stages. The Pre-xml script is called with the -ascii, -optbreak, and -noindex options to convert the input to Ascii characters, insert line break points, and disable the production of an index. Then the xmlto command converts the XML to a single HTML document, using these stylesheets: (1) MyStyle-txt-html.xsl (2) MyStyle-html.xsl (3) MyStyle.xsl The MyStyle-txt-html.xsl stylesheet is the same as MyStyle-nochunk-html.xsl, except that it contains an addition item to ensure that a generated "copyright" symbol is output as "(c)" rather than the Unicode character. This is necessary because the stylesheet itself generates a copyright symbol as part of the document title; the character is not in the original input. The w3m command is used with the -dump option to turn the HTML file into Ascii text, but this contains multiple sequences of blank lines that make it look awkward. Furthermore, chapter and section titles do not stand out very well. A local Perl script called Tidytxt is used to post-process the output. First, it converts sequences of blank lines into a single blank lines. Then it searches for chapter and section headings. Each chapter heading is uppercased, and preceded by an extra two blank lines and a line of equals characters. An extra newline is inserted before each section heading, and they are underlined with hyphens. CREATING INFO FILES This process starts with the same Pre-xml call as for text files. Non-ascii characters in the source are transliterated, and the elements are removed. The docbook2texi script is then called to convert the XML file into a Texinfo file. However, this is not quite enough. The converted file ends up with "conceptindex" and "optionindex" items, which are not recognized by the makeinfo command. These have to be changed to "cindex" and "findex" respectively in the final .texinfo file. Furthermore, the main menu lacks a pointer to the index, and indeed the index node itself is missing. These problems are fixed by running the file through a script called TidyInfo. Finally, a call of makeinfo creates a set of .info files. There is one apparently unconfigurable feature of docbook2texi: it does not seem possible to give it a file name for its output. It chooses a name based on the title of the document. Thus, the main specification ends up in a file called the_exim_mta.texi and the filter document in exim_filtering.texi. These files are removed after their contents have been copied and modified by the TidyInfo script, which writes to a .texinfo file. CREATING THE MAN PAGE I wrote a Perl script called x2man to create the exim.8 man page from the DocBook XML source. I deliberately did NOT start from the xfpt source, because it is the DocBook source that is the "standard". This comment line in the DocBook source marks the start of the command line options: A similar line marks the end. If at some time in the future another way other than xfpt is used to maintain the DocBook source, it needs to be capable of maintaining these comments. UNRESOLVED PROBLEMS There are a number of unresolved problems with producing the Exim documentation in the manner described above. I will describe them here in the hope that in future some way round them can be found. (1) When a whole chain of tools is processing a file, an error somewhere in the middle is often very hard to debug. For instance, an error in the xfpt file might not show up until an XML processor throws a wobbly because the generated XML is bad. You have to be able to read XML and figure out what generated what. One of the reasons for creating the "test" series of targets was to help in checking out these kinds of problem. (2) There is a mechanism in XML for marking parts of the document as "revised", and I have arranged for xfpt markup to use it. However, at the moment, the only output format that pays attention to this is the HTML output, which sets a green background. There are therefore no revision marks (change bars) in the PostScript, PDF, or text output formats as there used to be. (There never were for Texinfo.) (3) The index entries in the HTML format take you to the top of the section that is referenced, instead of to the point in the section where the index marker was set. (4) The HTML output supports only a single index, so the concept and options index entries have to be merged. (5) The index for the PostScript/PDF output does not merge identical page numbers, which makes some entries look ugly. (6) None of the indexes (PostScript/PDF and HTML) make use of textual markup; the text is all roman, without any italic or boldface. (7) I turned off hyphenation in the PostScript/PDF output, because it was being done so badly. (a) It seems to force hyphenation if it is at all possible, without regard to the "tightness" or "looseness" of the line. Decent formatting software should attempt hyphenation only if the line is over some "looseness" threshold; otherwise you get far too many hyphenations, often for several lines in succession. (b) It uses an algorithmic form of hyphenation that doesn't always produce acceptable word breaks. (I prefer to use a hyphenation dictionary.) (8) The PostScript/PDF output is badly paginated: (a) There seems to be no attempt to avoid "widow" and "orphan" lines on pages. A "widow" is the last line of a paragraph at the top of a page, and an "orphan" is the first line of a paragraph at the bottom of a page. (b) There seems to be no attempt to prevent section headings being placed last on a page, with no following text on the page. (9) The fop processor does not support "fi" ligatures, not even if you put the appropriate Unicode character into the source by hand. (10) There are no diagrams in the new documentation. This is something I hope to work on. The previously used Aspic command for creating line art from a textual description can output Encapsulated PostScript or Scalar Vector Graphics, which are two standard diagram representations. Aspic could be formally released and used to generate output that could be included in at least some of the output formats. (11) The use of a "zero-width space" works well as a way of specifying that Exim option names can be split, without hyphens, over line breaks. However, when an option is not split, if the line is very "loose", the zero-width space is expanded, along with other spaces. This is a totally crazy thing to, but unfortunately it is suggested by the Unicode definition of the zero-width space, which says "its presence between two characters does not prevent increased letter spacing in justification". It seems that the implementors of fop have understood "letter spacing" also to include "word spacing". Sigh. The consequence of (7), (8), and (9) is that the PostScript/PDF output looks as if it comes from some of the very early attempts at text formatting of around 20 years ago. We can only hope that 20 years' progress is not going to get lost, and that things will improve in this area. LIST OF FILES Markup.txt Describes the xfpt markup that is used HowItWorks.txt This document Makefile The makefile MyStyle-chunk-html.xsl Stylesheet for chunked HTML output MyStyle-filter-fo.xsl Stylesheet for filter fo output MyStyle-fo.xsl Stylesheet for any fo output MyStyle-html.xsl Stylesheet for any HTML output MyStyle-nochunk-html.xsl Stylesheet for non-chunked HTML output MyStyle-spec-fo.xsl Stylesheet for spec fo output MyStyle-txt-html.xsl Stylesheet for HTML=>text output MyStyle.xsl Stylesheet for all output MyTitleStyle.xsl Stylesheet for spec title page MyTitlepage.templates.xml Template for creating MyTitleStyle.xsl Myhtml.css Experimental css stylesheet for HTML output PageLabelPDF Script to postprocess PDF Pre-xml Script to preprocess XML TidyHTML-filter Script to tidy up the filter HTML output TidyHTML-spec Script to tidy up the spec HTML output TidyInfo Script to sort index problems in Texinfo output Tidytxt Script to compact multiple blank lines filter.xfpt xfpt source of the filter document spec.xfpt xfpt source of the specification document x2man Script to make the Exim man page from the XML Philip Hazel Last updated: 30 March 2006