4 This file contains descriptions of new features that have been added to Exim.
5 Before a formal release, there may be quite a lot of detail so that people can
6 test from the snapshots or the CVS before the documentation is updated. Once
7 the documentation is updated, this file is reduced to a short list.
12 1. New command-line option -bI:sieve will list all supported sieve extensions
13 of this Exim build on standard output, one per line.
14 ManageSieve (RFC 5804) providers managing scripts for use by Exim should
15 query this to establish the correct list to include in the protocol's
16 SIEVE capability line.
18 2. If the -n option is combined with the -bP option, then the name of an
19 emitted option is not output, only the value (if visible to you).
20 For instance, "exim -n -bP pid_file_path" should just emit a pathname
21 followed by a newline, and no other text.
23 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
24 has a "tls_dh_min_bits" option, to set the minimum acceptable number of
25 bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
26 acceptable for security. (Option accepted but ignored if using OpenSSL).
27 Defaults to 1024, the old value. May be lowered only to 512, or raised as
28 far as you like. Raising this may hinder TLS interoperability with other
29 sites and is not currently recommended. Lowering this will permit you to
30 establish a TLS session which is not as secure as you might like.
32 Unless you really know what you are doing, leave it alone.
34 4. If not built with DISABLE_DNSSEC, Exim now has the main option
35 dns_use_dnssec; if set to 1 then Exim will initialise the resolver library
36 to send the DO flag to your recursive resolver. If you have a recursive
37 resolver, which can set the Authenticated Data (AD) flag in results, Exim
40 Current status: work-in-progress; $sender_host_dnssec variable added.
42 5. DSCP support for outbound connections: on a transport using the smtp driver,
43 set "dscp = ef", for instance, to cause the connections to have the relevant
44 DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
46 Similarly for inbound connections, there is a new control modifier, dscp,
47 so "warn control = dscp/ef" in the connect ACL, or after authentication.
49 Supported values depend upon system libraries. "exim -bI:dscp" to list the
50 ones Exim knows of. You can also set a raw number 0..0x3F.
52 6. The -G command-line flag is no longer ignored; it is now equivalent to an
53 ACL setting "control = suppress_local_fixups". The -L command-line flag
54 is now accepted and forces use of syslog, with the provided tag as the
55 process name. A few other flags used by Sendmail are now accepted and
58 7. New cutthrough routing feature. Requested by a "control = cutthrough_delivery"
59 ACL modifier; works for single-recipient mails which are recieved on and
60 deliverable via SMTP. Using the connection made for a recipient verify,
61 if requested before the verify, or a new one made for the purpose while
62 the inbound connection is still active. The bulk of the mail item is copied
63 direct from the inbound socket to the outbound (as well as the spool file).
64 When the source notifies the end of data, the data acceptance by the destination
65 is negociated before the acceptance is sent to the source. If the destination
66 does not accept the mail item, for example due to content-scanning, the item
67 is not accepted from the source and therefore there is no need to generate
68 a bounce mail. This is of benefit when providing a secondary-MX service.
69 The downside is that delays are under the control of the ultimate destination
72 The Recieved-by: header on items delivered by cutthrough is generated
73 early in reception rather than at the end; this will affect any timestamp
74 included. The log line showing delivery is recorded before that showing
75 reception; it uses a new ">>" tag instead of "=>".
77 To support the feature, verify-callout connections can now use ESMTP and TLS.
78 The usual smtp transport options are honoured, plus a (new, default everything)
79 hosts_verify_avoid_tls.
81 New variable families named tls_in_cipher, tls_out_cipher etc. are introduced
82 for specific access to the information for each connection. The old names
83 are present for now but deprecated.
85 Not yet supported: IGNOREQUOTA, SIZE, PIPELINING, AUTH.
87 8. New expansion operators ${listnamed:name} to get the content of a named list
88 and ${listcount:string} to count the items in a list.
90 9. New global option "gnutls_enable_pkcs11", defaults false. The GnuTLS
91 rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11
92 modules. For some situations this is desirable, but we expect admin in
93 those situations to know they want the feature. More commonly, it means
94 that GUI user modules get loaded and are broken by the setuid Exim being
95 unable to access files specified in environment variables and passed
96 through, thus breakage. So we explicitly inhibit the PKCS11 initialisation
97 unless this new option is set.
99 10. The "acl = name" condition on an ACL now supports optional arguments.
100 New expansion item "${acl {name}{arg}...}" and expansion condition
101 "acl {{name}{arg}...}" are added. In all cases up to nine arguments
102 can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL.
103 Variable $acl_narg contains the number of arguments. If the ACL sets
104 a "message =" value this becomes the result of the expansion item,
105 or the value of $value for the expansion condition. If the ACL returns
106 accept the expansion condition is true; if reject, false. A defer
107 return results in a forced fail.
112 1. New authenticator driver, "gsasl". Server-only (at present).
113 This is a SASL interface, licensed under GPL, which can be found at
114 http://www.gnu.org/software/gsasl/.
115 This system does not provide sources of data for authentication, so
116 careful use needs to be made of the conditions in Exim.
118 2. New authenticator driver, "heimdal_gssapi". Server-only.
119 A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
120 is no longer honoured for setuid programs by Heimdal. Use the
121 "server_keytab" option to point to the keytab.
123 3. The "pkg-config" system can now be used when building Exim to reference
124 cflags and library information for lookups and authenticators, rather
125 than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
126 "LOOKUP_LIBS" directly. Similarly for handling the TLS library support
127 without adjusting "TLS_INCLUDE" and "TLS_LIBS".
129 In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
130 find the headers and libraries for PCRE.
132 4. New expansion variable $tls_bits.
134 5. New lookup type, "dbmjz". Key is an Exim list, the elements of which will
135 be joined together with ASCII NUL characters to construct the key to pass
136 into the DBM library. Can be used with gsasl to access sasldb2 files as
139 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
141 Avoid release 1.0.1a if you can. Note that the default value of
142 "openssl_options" is no longer "+dont_insert_empty_fragments", as that
143 increased susceptibility to attack. This may still have interoperability
144 implications for very old clients (see version 4.31 change 37) but
145 administrators can choose to make the trade-off themselves and restore
146 compatibility at the cost of session security.
148 7. Use of the new expansion variable $tls_sni in the main configuration option
149 tls_certificate will cause Exim to re-expand the option, if the client
150 sends the TLS Server Name Indication extension, to permit choosing a
151 different certificate; tls_privatekey will also be re-expanded. You must
152 still set these options to expand to valid files when $tls_sni is not set.
154 The SMTP Transport has gained the option tls_sni, which will set a hostname
155 for outbound TLS sessions, and set $tls_sni too.
157 A new log_selector, +tls_sni, has been added, to log received SNI values
158 for Exim as a server.
160 8. The existing "accept_8bitmime" option now defaults to true. This means
161 that Exim is deliberately not strictly RFC compliant. We're following
162 Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
163 Those who disagree, or know that they are talking to mail servers that,
164 even today, are not 8-bit clean, need to turn off this option.
166 9. Exim can now be started with -bw (with an optional timeout, given as
167 -bw<timespec>). With this, stdin at startup is a socket that is
168 already listening for connections. This has a more modern name of
169 "socket activation", but forcing the activated socket to fd 0. We're
170 interested in adding more support for modern variants.
172 10. ${eval } now uses 64-bit values on supporting platforms. A new "G" suffix
173 for numbers indicates multiplication by 1024^3.
175 11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
176 gnutls_require_mac & gnutls_require_protocols are no longer supported.
177 tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
178 string, documentation for which is at:
179 http://www.gnu.org/software/gnutls/manual/html_node/Priority-Strings.html
181 SNI support has been added to Exim's GnuTLS integration too.
183 For sufficiently recent GnuTLS libraries, ${randint:..} will now use
184 gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
186 12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
187 is now available. If the contents of the file are valid, then Exim will
188 send that back in response to a TLS status request; this is OCSP Stapling.
189 Exim will not maintain the contents of the file in any way: administrators
190 are responsible for ensuring that it is up-to-date.
192 See "experimental-spec.txt" for more details.
194 13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
195 identically to TXT record lookups.
197 14. New expansion variable $tod_epoch_l for higher-precision time.
199 15. New global option tls_dh_max_bits, defaulting to current value of NSS
200 hard-coded limit of DH ephemeral bits, to fix interop problems caused by
201 GnuTLS 2.12 library recommending a bit count higher than NSS supports.
203 16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
204 Option can now be a path or an identifier for a standard prime.
205 If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
206 Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
209 17. SSLv2 now disabled by default in OpenSSL. (Never supported by GnuTLS).
210 Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
211 install was not built with OPENSSL_NO_SSL2 ("no-ssl2").
217 1. New options for the ratelimit ACL condition: /count= and /unique=.
218 The /noupdate option has been replaced by a /readonly option.
220 2. The SMTP transport's protocol option may now be set to "smtps", to
221 use SSL-on-connect outbound.
223 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
224 there is a problem talking to the AV scanner, or the AV scanner running.
226 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
227 and check if the search item is a member of the list. This does not
228 support named lists, but does subject the list part to string expansion.
230 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
231 built, Exim no longer performs string expansion on the second string of
232 the match_* expansion conditions: "match_address", "match_domain",
233 "match_ip" & "match_local_part". Named lists can still be used.
239 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
240 or off in the resolver library.
246 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
247 is now LDAP/TLS support, given sufficiently modern OpenLDAP client
248 libraries. The following global options have been added in support of
249 this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
250 ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
252 2. The pipe transport now takes a boolean option, "freeze_signal", default
253 false. When true, if the external delivery command exits on a signal then
254 Exim will freeze the message in the queue, instead of generating a bounce.
256 3. Log filenames may now use %M as an escape, instead of %D (still available).
257 The %M pattern expands to yyyymm, providing month-level resolution.
259 4. The $message_linecount variable is now updated for the maildir_tag option,
260 in the same way as $message_size, to reflect the real number of lines,
261 including any header additions or removals from transport.
263 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
264 Exim now selects entries randomly, to better scale in a cluster setup.
270 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
271 the flaw permitted the Exim run-time user to cause root to append to
272 arbitrary files of the attacker's choosing, with the content based
273 on content supplied by the attacker.
275 2. Exim now supports loading some lookup types at run-time, using your
276 platform's dlopen() functionality. This has limited platform support
277 and the intention is not to support every variant, it's limited to
278 dlopen(). This permits the main Exim binary to not be linked against
279 all the libraries needed for all the lookup types.
285 NOTE: this version is not guaranteed backwards-compatible, please read the
286 items below carefully
288 1. A new main configuration option, "openssl_options", is available if Exim
289 is built with SSL support provided by OpenSSL. The option allows
290 administrators to specify OpenSSL options to be used on connections;
291 typically this is to set bug compatibility features which the OpenSSL
292 developers have not enabled by default. There may be security
293 consequences for certain options, so these should not be changed
296 2. A new pipe transport option, "permit_coredumps", may help with problem
297 diagnosis in some scenarios. Note that Exim is typically installed as
298 a setuid binary, which on most OSes will inhibit coredumps by default,
299 so that safety mechanism would have to be overridden for this option to
300 be able to take effect.
302 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
303 Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
304 Note that this switches Exim to use a new API ("INSTREAM") and a future
305 release of ClamAV will remove support for the old API ("STREAM").
307 The av_scanner option, when set to "clamd", now takes an optional third
308 part, "local", which causes Exim to pass a filename to ClamAV instead of
309 the file content. This is the same behaviour as when clamd is pointed at
310 a Unix-domain socket. For example:
312 av_scanner = clamd:192.0.2.3 1234:local
314 ClamAV's ExtendedDetectionInfo response format is now handled.
316 4. There is now a -bmalware option, restricted to admin users. This option
317 takes one parameter, a filename, and scans that file with Exim's
318 malware-scanning framework. This is intended purely as a debugging aid
319 to ensure that Exim's scanning is working, not to replace other tools.
320 Note that the ACL framework is not invoked, so if av_scanner references
321 ACL variables without a fallback then this will fail.
323 5. There is a new expansion operator, "reverse_ip", which will reverse IP
324 addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples:
326 ${reverse_ip:192.0.2.4}
328 ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
329 -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
331 6. There is a new ACL control called "debug", to enable debug logging.
332 This allows selective logging of certain incoming transactions within
333 production environments, with some care. It takes two options, "tag"
334 and "opts"; "tag" is included in the filename of the log and "opts"
335 is used as per the -d<options> command-line option. Examples, which
336 don't all make sense in all contexts:
339 control = debug/tag=.$sender_host_address
340 control = debug/opts=+expand+acl
341 control = debug/tag=.$message_exim_id/opts=+expand
343 7. It has always been implicit in the design and the documentation that
344 "the Exim user" is not root. src/EDITME said that using root was
345 "very strongly discouraged". This is not enough to keep people from
346 shooting themselves in the foot in days when many don't configure Exim
347 themselves but via package build managers. The security consequences of
348 running various bits of network code are severe if there should be bugs in
349 them. As such, the Exim user may no longer be root. If configured
350 statically, Exim will refuse to build. If configured as ref:user then Exim
351 will exit shortly after start-up. If you must shoot yourself in the foot,
352 then henceforth you will have to maintain your own local patches to strip
355 8. There is a new expansion operator, bool_lax{}. Where bool{} uses the ACL
356 condition logic to determine truth/failure and will fail to expand many
357 strings, bool_lax{} uses the router condition logic, where most strings
359 Note: bool{00} is false, bool_lax{00} is true.
361 9. Routers now support multiple "condition" tests,
363 10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
364 Setting this allows an admin to define which entry in the tcpwrappers
365 config file will be used to control access to the daemon. This option
366 is only available when Exim is built with USE_TCP_WRAPPERS. The
367 default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
370 11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
371 the Exim run-time user, instead of root.
373 12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
374 is forced on. This is mitigated by the new build option
375 TRUSTED_CONFIG_LIST which defines a list of configuration files which
376 are trusted; one per line. If a config file is owned by root and matches
377 a pathname in the list, then it may be invoked by the Exim build-time
378 user without Exim relinquishing root privileges.
380 13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
381 trusted to supply -D<Macro[=Value]> overrides on the command-line. Going
382 forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
383 include the main config. As a transition mechanism, we are temporarily
384 providing a work-around: the new build option WHITELIST_D_MACROS provides
385 a colon-separated list of macro names which may be overridden by the Exim
386 run-time user. The values of these macros are constrained to the regex
387 ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
393 1. TWO SECURITY FIXES: one relating to mail-spools which are globally
394 writable, the other to locking of MBX folders (not mbox).
396 2. MySQL stored procedures are now supported.
398 3. The dkim_domain transport option is now a list, not a single string, and
399 messages will be signed for each element in the list (discarding
402 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups
403 in the presence of multiple character strings within the RR. Prior to 4.70,
404 only the first string would be returned. The dnsdb lookup now, by default,
405 preserves the pre-4.70 semantics, but also now takes an extended output
406 separator specification. The separator can be followed by a semicolon, to
407 concatenate the individual text strings together with no join character,
408 or by a comma and a second separator character, in which case the text
409 strings within a TXT record are joined on that second character.
410 Administrators are reminded that DNS provides no ordering guarantees
411 between multiple records in an RRset. For example:
413 foo.example. IN TXT "a" "b" "c"
414 foo.example. IN TXT "d" "e" "f"
416 ${lookup dnsdb{>/ txt=foo.example}} -> "a/d"
417 ${lookup dnsdb{>/; txt=foo.example}} -> "def/abc"
418 ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f"
424 1. Native DKIM support without an external library.
425 (Note that if no action to prevent it is taken, a straight upgrade will
426 result in DKIM verification of all signed incoming emails. See spec
427 for details on conditionally disabling)
429 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha).
431 3. There is now a bool{} expansion condition which maps certain strings to
432 true/false condition values (most likely of use in conjunction with the
433 and{} expansion operator).
435 4. The $spam_score, $spam_bar and $spam_report variables are now available
438 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as
439 options, provided that Exim is invoked by an admin_user.
441 6. There is a new option gnutls_compat_mode, when linked against GnuTLS,
442 which increases compatibility with older clients at the cost of decreased
443 security. Don't set this unless you need to support such clients.
445 7. There is a new expansion operator, ${randint:...} which will produce a
446 "random" number less than the supplied integer. This randomness is
447 not guaranteed to be cryptographically strong, but depending upon how
448 Exim was built may be better than the most naive schemes.
450 8. Exim now explicitly ensures that SHA256 is available when linked against
453 9. The transport_filter_timeout option now applies to SMTP transports too.
459 1. Preliminary DKIM support in Experimental.
465 1. The body_linecount and body_zerocount C variables are now exported in the
468 2. When a dnslists lookup succeeds, the key that was looked up is now placed
469 in $dnslist_matched. When the key is an IP address, it is not reversed in
470 this variable (though it is, of course, in the actual lookup). In simple
473 deny dnslists = spamhaus.example
475 the key is also available in another variable (in this case,
476 $sender_host_address). In more complicated cases, however, this is not
477 true. For example, using a data lookup might generate a dnslists lookup
480 deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
482 If this condition succeeds, the value in $dnslist_matched might be
483 192.168.6.7 (for example).
485 3. Authenticators now have a client_condition option. When Exim is running as
486 a client, it skips an authenticator whose client_condition expansion yields
487 "0", "no", or "false". This can be used, for example, to skip plain text
488 authenticators when the connection is not encrypted by a setting such as:
490 client_condition = ${if !eq{$tls_cipher}{}}
492 Note that the 4.67 documentation states that $tls_cipher contains the
493 cipher used for incoming messages. In fact, during SMTP delivery, it
494 contains the cipher used for the delivery. The same is true for
497 4. There is now a -Mvc <message-id> option, which outputs a copy of the
498 message to the standard output, in RFC 2822 format. The option can be used
499 only by an admin user.
501 5. There is now a /noupdate option for the ratelimit ACL condition. It
502 computes the rate and checks the limit as normal, but it does not update
503 the saved data. This means that, in relevant ACLs, it is possible to lookup
504 the existence of a specified (or auto-generated) ratelimit key without
505 incrementing the ratelimit counter for that key.
507 In order for this to be useful, another ACL entry must set the rate
508 for the same key somewhere (otherwise it will always be zero).
513 # Read the rate; if it doesn't exist or is below the maximum
515 deny ratelimit = 100 / 5m / strict / noupdate
516 log_message = RATE: $sender_rate / $sender_rate_period \
517 (max $sender_rate_limit)
519 [... some other logic and tests...]
521 warn ratelimit = 100 / 5m / strict / per_cmd
522 log_message = RATE UPDATE: $sender_rate / $sender_rate_period \
523 (max $sender_rate_limit)
524 condition = ${if le{$sender_rate}{$sender_rate_limit}}
528 6. The variable $max_received_linelength contains the number of bytes in the
529 longest line that was received as part of the message, not counting the
530 line termination character(s).
532 7. Host lists can now include +ignore_defer and +include_defer, analagous to
533 +ignore_unknown and +include_unknown. These options should be used with
534 care, probably only in non-critical host lists such as whitelists.
536 8. There's a new option called queue_only_load_latch, which defaults true.
537 If set false when queue_only_load is greater than zero, Exim re-evaluates
538 the load for each incoming message in an SMTP session. Otherwise, once one
539 message is queued, the remainder are also.
541 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most
542 cases when an SMTP session ends without sending QUIT. However, when Exim
543 itself is is bad trouble, such as being unable to write to its log files,
544 this ACL is not run, because it might try to do things (such as write to
545 log files) that make the situation even worse.
547 Like the QUIT ACL, this new ACL is provided to make it possible to gather
548 statistics. Whatever it returns (accept or deny) is immaterial. The "delay"
549 modifier is forbidden in this ACL.
551 When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set
552 to a string that indicates the reason for the termination of the SMTP
553 connection. The possible values are:
555 acl-drop Another ACL issued a "drop" command
556 bad-commands Too many unknown or non-mail commands
557 command-timeout Timeout while reading SMTP commands
558 connection-lost The SMTP connection has been lost
559 data-timeout Timeout while reading message data
560 local-scan-error The local_scan() function crashed
561 local-scan-timeout The local_scan() function timed out
562 signal-exit SIGTERM or SIGINT
563 synchronization-error SMTP synchronization error
564 tls-failed TLS failed to start
566 In most cases when an SMTP connection is closed without having received
567 QUIT, Exim sends an SMTP response message before actually closing the
568 connection. With the exception of acl-drop, the default message can be
569 overridden by the "message" modifier in the NOTQUIT ACL. In the case of a
570 "drop" verb in another ACL, it is the message from the other ACL that is
573 10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of
574 servers with individual queries. This is done by starting the query with
575 "servers=x:y:z;", where each item in the list may take one of two forms:
577 (1) If it is just a host name, the appropriate global option (mysql_servers
578 or pgsql_servers) is searched for a host of the same name, and the
579 remaining parameters (database, user, password) are taken from there.
581 (2) If it contains any slashes, it is taken as a complete parameter set.
583 The list of servers is used in exactly the same was as the global list.
584 Once a connection to a server has happened and a query has been
585 successfully executed, processing of the lookup ceases.
587 This feature is intended for use in master/slave situations where updates
588 are occurring, and one wants to update a master rather than a slave. If the
589 masters are in the list for reading, you might have:
591 mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw
593 In an updating lookup, you could then write
595 ${lookup mysql{servers=master; UPDATE ...}
597 If, on the other hand, the master is not to be used for reading lookups:
599 pgsql_servers = slave1/db/name/pw:slave2/db/name/pw
601 you can still update the master by
603 ${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
605 11. The message_body_newlines option (default FALSE, for backwards
606 compatibility) can be used to control whether newlines are present in
607 $message_body and $message_body_end. If it is FALSE, they are replaced by
614 1. There is a new log selector called smtp_no_mail, which is not included in
615 the default setting. When it is set, a line is written to the main log
616 whenever an accepted SMTP connection terminates without having issued a
619 2. When an item in a dnslists list is followed by = and & and a list of IP
620 addresses, the behaviour was not clear when the lookup returned more than
621 one IP address. This has been solved by the addition of == and =& for "all"
622 rather than the default "any" matching.
624 3. Up till now, the only control over which cipher suites GnuTLS uses has been
625 for the cipher algorithms. New options have been added to allow some of the
626 other parameters to be varied.
628 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
629 set, Exim compiles a runtime option called disable_fsync.
631 5. There is a new variable called $smtp_count_at_connection_start.
633 6. There's a new control called no_pipelining.
635 7. There are two new variables called $sending_ip_address and $sending_port.
636 These are set whenever an SMTP connection to another host has been set up.
638 8. The expansion of the helo_data option in the smtp transport now happens
639 after the connection to the server has been made.
641 9. There is a new expansion operator ${rfc2047d: that decodes strings that
642 are encoded as per RFC 2047.
644 10. There is a new log selector called "pid", which causes the current process
645 id to be added to every log line, in square brackets, immediately after the
648 11. Exim has been modified so that it flushes SMTP output before implementing
649 a delay in an ACL. It also flushes the output before performing a callout,
650 as this can take a substantial time. These behaviours can be disabled by
651 obeying control = no_delay_flush or control = no_callout_flush,
652 respectively, at some earlier stage of the connection.
654 12. There are two new expansion conditions that iterate over a list. They are
655 called forany and forall.
657 13. There's a new global option called dsn_from that can be used to vary the
658 contents of From: lines in bounces and other automatically generated
659 messages ("delivery status notifications" - hence the name of the option).
661 14. The smtp transport has a new option called hosts_avoid_pipelining.
663 15. By default, exigrep does case-insensitive matches. There is now a -I option
664 that makes it case-sensitive.
666 16. A number of new features ("addresses", "map", "filter", and "reduce") have
667 been added to string expansions to make it easier to process lists of
668 items, typically addresses.
670 17. There's a new ACL modifier called "continue". It does nothing of itself,
671 and processing of the ACL always continues with the next condition or
672 modifier. It is provided so that the side effects of expanding its argument
675 18. It is now possible to use newline and other control characters (those with
676 values less than 32, plus DEL) as separators in lists.
678 19. The exigrep utility now has a -v option, which inverts the matching
681 20. The host_find_failed option in the manualroute router can now be set to
688 No new features were added to 4.66.
694 No new features were added to 4.65.
700 1. ACL variables can now be given arbitrary names, as long as they start with
701 "acl_c" or "acl_m" (for connection variables and message variables), are at
702 least six characters long, with the sixth character being either a digit or
705 2. There is a new ACL modifier called log_reject_target. It makes it possible
706 to specify which logs are used for messages about ACL rejections.
708 3. There is a new authenticator called "dovecot". This is an interface to the
709 authentication facility of the Dovecot POP/IMAP server, which can support a
710 number of authentication methods.
712 4. The variable $message_headers_raw provides a concatenation of all the
713 messages's headers without any decoding. This is in contrast to
714 $message_headers, which does RFC2047 decoding on the header contents.
716 5. In a DNS black list, if two domain names, comma-separated, are given, the
717 second is used first to do an initial check, making use of any IP value
718 restrictions that are set. If there is a match, the first domain is used,
719 without any IP value restrictions, to get the TXT record.
721 6. All authenticators now have a server_condition option.
723 7. There is a new command-line option called -Mset. It is useful only in
724 conjunction with -be (that is, when testing string expansions). It must be
725 followed by a message id; Exim loads the given message from its spool
726 before doing the expansions.
728 8. Another similar new command-line option is called -bem. It operates like
729 -be except that it must be followed by the name of a file that contains a
732 9. When an address is delayed because of a 4xx response to a RCPT command, it
733 is now the combination of sender and recipient that is delayed in
734 subsequent queue runs until its retry time is reached.
736 10. Unary negation and the bitwise logical operators and, or, xor, not, and
737 shift, have been added to the eval: and eval10: expansion items.
739 11. The variables $interface_address and $interface_port have been renamed
740 as $received_ip_address and $received_port, to make it clear that they
741 relate to message reception rather than delivery. (The old names remain
742 available for compatibility.)
744 12. The "message" modifier can now be used on "accept" and "discard" acl verbs
745 to vary the message that is sent when an SMTP command is accepted.
751 1. There is a new Boolean option called filter_prepend_home for the redirect
754 2. There is a new acl, set by acl_not_smtp_start, which is run right at the
755 start of receiving a non-SMTP message, before any of the message has been
758 3. When an SMTP error message is specified in a "message" modifier in an ACL,
759 or in a :fail: or :defer: message in a redirect router, Exim now checks the
760 start of the message for an SMTP error code.
762 4. There is a new parameter for LDAP lookups called "referrals", which takes
763 one of the settings "follow" (the default) or "nofollow".
765 5. Version 20070721.2 of exipick now included, offering these new options:
767 After all other sorting options have bee processed, reverse order
768 before displaying messages (-R is synonym).
770 Randomize order of matching messages before displaying.
772 Instead of displaying the matching messages, display the sum
774 --sort <variable>[,<variable>...]
775 Before displaying matching messages, sort the messages according to
776 each messages value for each variable.
778 Negate the value for every test (returns inverse output from the
779 same criteria without --not).
785 1. The ${readsocket expansion item now supports Internet domain sockets as well
786 as Unix domain sockets. If the first argument begins "inet:", it must be of
787 the form "inet:host:port". The port is mandatory; it may be a number or the
788 name of a TCP port in /etc/services. The host may be a name, or it may be an
789 IP address. An ip address may optionally be enclosed in square brackets.
790 This is best for IPv6 addresses. For example:
792 ${readsocket{inet:[::1]:1234}{<request data>}...
794 Only a single host name may be given, but if looking it up yield more than
795 one IP address, they are each tried in turn until a connection is made. Once
796 a connection has been made, the behaviour is as for ${readsocket with a Unix
799 2. If a redirect router sets up file or pipe deliveries for more than one
800 incoming address, and the relevant transport has batch_max set greater than
801 one, a batch delivery now occurs.
803 3. The appendfile transport has a new option called maildirfolder_create_regex.
804 Its value is a regular expression. For a maildir delivery, this is matched
805 against the maildir directory; if it matches, Exim ensures that a
806 maildirfolder file is created alongside the new, cur, and tmp directories.
812 The documentation is up-to-date for the 4.61 release. Major new features since
813 the 4.60 release are:
815 . An option called disable_ipv6, to disable the use of IPv6 completely.
817 . An increase in the number of ACL variables to 20 of each type.
819 . A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
820 $2, $3, (though those are still set) because the numeric variables get used
821 for other things in complicated expansions.
823 . The default for rfc1413_query_timeout has been changed from 30s to 5s.
825 . It is possible to use setclassresources() on some BSD OS to control the
826 resources used in pipe deliveries.
828 . A new ACL modifier called add_header, which can be used with any verb.
830 . More errors are detectable in retry rules.
832 There are a number of other additions too.
838 The documentation is up-to-date for the 4.60 release. Major new features since
839 the 4.50 release are:
841 . Support for SQLite.
843 . Support for IGNOREQUOTA in LMTP.
845 . Extensions to the "submission mode" features.
847 . Support for Client SMTP Authorization (CSA).
849 . Support for ratelimiting hosts and users.
851 . New expansion items to help with the BATV "prvs" scheme.
853 . A "match_ip" condition, that matches an IP address against a list.
855 There are many more minor changes.
git://git.exim.org / users / heiko / exim.git / blob