X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/f3f065bbe8b7d7fdc4d46dbfa063ae4dfb05bfd7..a43a27c5e355a06131c36e68a63a0609b1da8307:/doc/doc-txt/NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index ccd5989cb..bd43aecf8 100644
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -1,4 +1,4 @@
-$Cambridge: exim/doc/doc-txt/NewStuff,v 1.134 2007/01/31 16:52:12 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/NewStuff,v 1.145 2007/03/13 15:32:47 ph10 Exp $
 
 New Features in Exim
 --------------------
@@ -232,6 +232,175 @@ Version 4.67
     id to be added to every log line, in square brackets, immediately after the
     time and date.
 
+11. Exim has been modified so that it flushes SMTP output before implementing
+    a delay in an ACL. It also flushes the output before performing a callout,
+    as this can take a substantial time. These behaviours can be disabled by
+    obeying control = no_delay_flush or control = no_callout_flush,
+    respectively, at some earlier stage of the connection. The effect of the
+    new default behaviour is to disable the PIPELINING optimization in these
+    situations, in order to avoid unexpected timeouts in clients.
+
+12. There are two new expansion conditions that iterate over a list. They are
+    called forany and forall, and they are used like this:
+
+      ${if forany{<a list>}{<a condition>}{<yes-string>}{<no-string>}}
+      ${if forall{<a list>}{<a condition>}{<yes-string>}{<no-string>}}
+
+    The first argument is expanded, and the result is treated as a list. By
+    default, the list separator is a colon, but it can be changed by the normal
+    method. The second argument is interpreted as a condition that is to be
+    applied to each item in the list in turn. During the interpretation of the
+    condition, the current list item is placed in a variable called $item.
+
+    - For forany, interpretation stops if the condition is true for any item,
+      and the yes-string is then expanded. If the condition is false for all
+      items in the list, the no-string is expanded.
+
+    - For forall, interpration stops if the condition is false for any item,
+      and the no-string is then expanded. If the condition is true for all
+      items in the list, the yes-string is expanded.
+
+    Note that negation of forany means that the condition must be false for all
+    items for the overall condition to succeed, and negation of forall means
+    that the condition must be false for at least one item.
+
+    In this example, the list separator is changed to a comma:
+
+      ${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+
+    Outside a forany/forall condition, the value of $item is an empty string.
+    Its value is saved and restored while forany/forall is being processed, to
+    enable these expansion items to be nested.
+
+13. There's a new global option called dsn_from that can be used to vary the
+    contents of From: lines in bounces and other automatically generated
+    messages ("delivery status notifications" - hence the name of the option).
+    The default setting is:
+
+      dsn_from = Mail Delivery System <Mailer-Daemon@$qualify_domain>
+
+    The value is expanded every time it is needed. If the expansion fails, a
+    panic is logged, and the default setting is used.
+
+14. The smtp transport has a new option called hosts_avoid_pipelining. It can
+    be used to suppress the use of PIPELINING to certain hosts, while still
+    supporting the other SMTP extensions (cf hosts_avoid_tls).
+
+15. By default, exigrep does case-insensitive matches. There is now a -I option
+    that makes it case-sensitive. This may give a performance improvement when
+    searching large log files. Without -I, the Perl pattern matches use the /i
+    option; with -I they don't. In both cases it is possible to change the case
+    sensitivity within the pattern using (?i) or (?-i).
+
+16. A number of new features have been added to string expansions to make it
+    easier to process lists of items, typically addresses. These are as
+    follows:
+
+  * ${addresses:<string>}
+
+    The string (after expansion) is interpreted as a list of addresses in RFC
+    2822 format, such as can be found in a To: or Cc: header line. The
+    operative address (local-part@domain) is extracted from each item, and the
+    result of the expansion is a colon-separated list, with appropriate
+    doubling of colons should any happen to be present in the email addresses.
+    Syntactically invalid RFC2822 address items are omitted from the output.
+
+    It is possible to specify a character other than colon for the output
+    separator by starting the string with > followed by the new separator
+    character. For example:
+
+      ${addresses:>& The Boss <ceo@up.stairs>, sec@base.ment (dogsbody)}
+
+    expands to "ceo@up.stairs&sec@base.ment". Compare ${address (singular),
+    which extracts the working address from a single RFC2822 address.
+
+  * ${map{<string1>}{<string2>}}
+
+    After expansion, <string1> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way. For each item
+    in this list, its value is place in $item, and then <string2> is expanded
+    and added to the output as an item in a new list. The separator used for
+    the output list is the same as the one used for the input, but is not
+    included in the output. For example:
+
+      ${map{a:b:c}{[$item]}} ${map{<- x-y-z}{($item)}}
+
+    expands to "[a]:[b]:[c] (x)-(y)-(z)". At the end of the expansion, the
+    value of $item is restored to what it was before.
+
+  * ${filter{<string1>}{<condition>}}
+
+    After expansion, <string1> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way. For each item
+    in this list, its value is place in $item, and then the condition is
+    evaluated. If the condition is true, $item is added to the output as an
+    item in a new list; if the condition is false, the item is discarded. The
+    separator used for the output list is the same as the one used for the
+    input, but is not included in the output. For example:
+
+      ${filter{a:b:c}{!eq{$item}{b}}
+
+    yields "a:c". At the end of the expansion, the value of $item is restored
+    to what it was before.
+
+  * ${reduce{<string1>}{<string2>}{<string3>}}
+
+    The ${reduce expansion operation reduces a list to a single, scalar string.
+    After expansion, <string1> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way. Then <string2>
+    is expanded and assigned to the $value variable. After this, each item in
+    the <string1> list is assigned to $item in turn, and <string3> is expanded
+    for each of them. The result of that expansion is assigned to $value before
+    the next iteration. When the end of the list is reached, the final value of
+    $value is added to the expansion string. The ${reduce expansion item can be
+    used in a number of ways. For example, to add up a list of numbers:
+
+      ${reduce {<, 1,2,3}{0}{${eval:$value+$item}}}
+
+    The result of that expansion would be "6". The maximum of a list of numbers
+    can be found:
+
+      ${reduce {3:0:9:4:6}{0}{${if >{$item}{$value}{$item}{$value}}}}
+
+    At the end of a ${reduce expansion, the values of $item and $value is
+    restored to what they were before.
+
+17. There's a new ACL modifier called "continue". It does nothing of itself,
+    and processing of the ACL always continues with the next condition or
+    modifier. It is provided so that the side effects of expanding its argument
+    can be used. Typically this would be for updating a database. It is really
+    just a syntactic tidiness, because the following two lines have the same
+    effect:
+
+      continue  = <some expansion>
+      condition = ${if eq{0}{<some expansion>}{true}{true}}
+
+18. It is now possible to use newline and other control characters (those with
+    values less than 32, plus DEL) as separators in lists. Such separators must
+    be provided literally at the time the list is processed, but the string
+    expansion that happens first means that you can write them using normal
+    escape sequences. For example, if a new-line separated list of domains is
+    generated by a lookup, you can now process it directly by a line such as
+    this:
+
+      domains = <\n ${lookup mysql{.....}}
+
+    This avoids having to change the list separator in such data. Unlike
+    printing character separators, which can be included in list items by
+    doubling, it is not possible to include a control character as data when it
+    is set as the separator. Two such characters in succession are interpreted
+    as enclosing an empty list item.
+
+19. The exigrep utility now has a -v option, which inverts the matching
+    condition.
+
+20. The host_find_failed option in the manualroute router can now be set to
+    "ignore". This causes it to completely ignore a host whose IP address
+    cannot be found. If all the hosts in the list are ignored, the behaviour is
+    controlled by the new host_all_ignored option, which takes the same values
+    as host_find_failed, except that it cannot be set to "ignore". Its default
+    is "defer".
+
 
 Version 4.66
 ------------