X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/e6347c112a85a3775494958c1214f07f297d23c1..541fbf5084bf0ef7cae1dc39275cfb80bfce82ef:/doc/doc-misc/WishList diff --git a/doc/doc-misc/WishList b/doc/doc-misc/WishList index e101901ad..28ae7332f 100644 --- a/doc/doc-misc/WishList +++ b/doc/doc-misc/WishList @@ -1,8 +1,12 @@ -$Cambridge: exim/doc/doc-misc/WishList,v 1.49 2005/09/15 08:27:59 ph10 Exp $ - EXIM 4 WISH LIST ---------------- +This Wish List is now obsolete. The items it contains have been imported into +the Exim Bugzilla, which is where all new wishes should be added. This file is +no longer maintained. Some day it should be deleted. + + +=============================================================================== Even when it was first released, Exim 4 had a Wish List because not all the things suggested for it were implemented. The list has not stopped growing... @@ -167,8 +171,8 @@ So the admin can pass back a reason. mark david mcCreary "I use the syntax_errors_to feature to email a copy of the error message. -It would be helpful to have the X-Failed-Receipients header in there, -identifying which addreses(s) are the problem, so that I don't have to +It would be helpful to have the X-Failed-Recipients header in there, +identifying which address(es) are the problem, so that I don't have to parse the body of the email message to figure out which addresses." ------------------------------------------------------------------------------ @@ -295,16 +299,6 @@ David Carter So several warnings could be generated as the mailbox got bigger and bigger. ------------------------------------------------------------------------------ -(146) 15-May-2000 M Allow SMTP error codes in retry rules - -This would allow special handling of certain errors from certain hosts. In -particular, it would allow failing of certain 4xx codes. - -This is now available for 4xx responses to RCPT commands. Is anything more -needed? Apparently, yes; there's been a request for a similar feature for MAIL -commands. ------------------------------------------------------------------------------- - (148) 15-May-2000 S Warn recipient if message rejected for quota excession. Heinz Ekker @@ -626,7 +620,7 @@ Joachim Wieland Is this really worth it? A per-transport value is also suggested - that would mean remembering the value with each failed address and taking a minimum or -a maximimum (which?). +a maximum (which?). ------------------------------------------------------------------------------ (24) 21-Feb-02 ? A way of testing TLS using -bh @@ -821,7 +815,7 @@ logs the IP of the sending host in the => line?" Also requested was amount of data transmitted for a non-delivery attempt. ------------------------------------------------------------------------------ -(69) 03-Jul-02 T Log selector to log whoson checs +(69) 03-Jul-02 T Log selector to log whoson checks Matt Bernstein "I'd quite like a log_selector option which could spot you'd done a whoson @@ -995,7 +989,7 @@ a list defer. Peter A. Savitch OpenLDAP 2.1 is going to be more popular (2.1.9 is available with many -bug fixes). TLS-enabled LDAP is an interesting and usefull thing. +bug fixes). TLS-enabled LDAP is an interesting and useful thing. I can try to implement some things and send the patches, like with ldapi. @@ -1220,12 +1214,6 @@ Maybe there should always be a variable with the error message for all the different kinds of verify failure. ------------------------------------------------------------------------------ -(196) 30-Sep-03 S A way of detecting whether it was HELO or EHLO in the ACL - -$received_protocol isn't reset until after the command is accepted (which -seems right), and $smtp_data shows only the arguments. Maybe $smtp_command? ------------------------------------------------------------------------------- - (197) 30-Sep-03 S MACROS_DROP_PRIVS and ALT_CONFIG_DROP_PRIVS Now that alternative configurations can be restricted to certain directories, @@ -1261,11 +1249,6 @@ This is an option that turns all hard bounces into soft bounces. The idea is that it can be used as a safety-net while testing configurations. Instead of a local bounce, the message stays on the queue; instead of 5xx SMTP responses, 4xx ones are given. - -The ability to do the opposite - turn 4xx into 5xx under certain circumstances -might also be useful (e.g. after a certain time). This might best be done by -extending the retry logic to recognize 4xx as a special error. (This is now -done.) ------------------------------------------------------------------------------ (202) 10-Oct-03 S -bvsomething to do a callout after the verify @@ -1303,7 +1286,6 @@ permanent ones after some fixed time. ------------------------------------------------------------------------------ (209) 31-Oct-03 S a way of making crashes in pipe commands temporary errors - ------------------------------------------------------------------------------ (210) 31-Oct-03 S runtime option to change the daemon name used for tcprwappers @@ -1320,19 +1302,11 @@ option, for use with multiple Exim daemons. See also 333. ------------------------------------------------------------------------------ -(214) 05-Nov-03 S Put the wild part of local part prefix/suffx in variables +(214) 05-Nov-03 S Put the wild part of local part prefix/suffix in variables Unfortunately, this isn't quite as trivial as it seems. ------------------------------------------------------------------------------ -(215) 14-Nov-03 S A way of turning off message-submission fix-ups - -Globally, and perhaps also via an ACL control so that it can be done on a -per-message basis. Is this still needed? Since this item was added to this -list, default fixups for non-local messages have been removed, and control = -submission has been added. ------------------------------------------------------------------------------- - (215) 26-Nov-03 M/L Conversion of IDNA domain names for logging IDNA (RFCs 3490-3492) converts domains names containing non-ASCII characters @@ -1344,13 +1318,6 @@ e.g. exigrep, eximstats, will be automatically handled if the logs are changed.) ------------------------------------------------------------------------------ -(216) 27-Nov-03 S Option to bounce if required TLS doesn't happen - -This is for the smtp transport with hosts_require_tls set. Currently, it -defers. Possibly the best approach is to make the error one that can be seen by -the retry logic. ------------------------------------------------------------------------------- - (217) 27-Nov-03 M A function to pass back variables from Perl This is a function that can be called from Perl, to take a name and a value and @@ -1456,12 +1423,6 @@ this reason, I don't really like this idea. (236) 02-Feb-04 S String in local_scan that's added to the binary version string ------------------------------------------------------------------------------ -(237) 02-Feb-04 M Add_header in ACLs because "message" is overloaded - -This would be useful for verbs where "message" is an error message. See also -333. ------------------------------------------------------------------------------- - (238) 05-Feb-04 S ${address to handle multiple addresses At present, ${address expects to see just one address. An extension would let @@ -1622,12 +1583,6 @@ For example: mainlog_selector and rejectlog_selector, with log_selector setting both of them. ------------------------------------------------------------------------------ -(286) 21-Jul-04 M Distinguishing a larger number of errors - -For instance, detecting "connection reset by peer" (ENETRESET or ECONNRESET) -might be useful. ------------------------------------------------------------------------------- - (288) 10-Aug-04 M Option for verify to require MX e.g. verify=sender/require_mx @@ -1653,7 +1608,7 @@ how useful this would actually be in practice. (292) 13-Aug-04 M Overall timeout for message reception -A client could in priciple keep an SMTP connection open for a very long time by +A client could in principle keep an SMTP connection open for a very long time by trickling in data very slowly. Also, after message_size_limit is exceeded, Exim continues to swallow the data (though it does not write it to disk) until the end is reached. Again, the connection could be held open for a very long time. @@ -1919,7 +1874,7 @@ headers should be re-planned and re-implemented in a more consistent manner. These are the main previous items: Exim 3 Wish List: 41, 85, 149, 187. -Exim 4 Wish List: 55, 62, 63, 160, 212, 237, 270, 314, 328. +Exim 4 Wish List: 55, 62, 63, 160, 212, 270, 314, 328. ------------------------------------------------------------------------------ (334) 07-Jun-05 M Support for messages larger than 2G @@ -1928,14 +1883,6 @@ This is probably a longish-term thing at the moment. Quotas over 2G are now supported, but not individual messages; no doubt one day this will be wanted. ------------------------------------------------------------------------------ -(335) 14-Jun-05 T Re-arrange default configuration - -A small niggle which might be worth fixing is the ordering of the ACL in the -default configuration file. The relay_from_hosts and authenticated clauses -would be better off before the dnslists examples. However, this should be left -until a x.x0 release, because of the documentation implications. ------------------------------------------------------------------------------- - (336) 16-Jun-05 M Show recipient(s) after header check failure The mainlog line for "There is no valid sender in any header line" shows the @@ -1977,7 +1924,136 @@ second. Maybe something like ${match_any{...}{...}} is needed. (341) 15-Sep-05 S Add /return_path_retain to submission mode -This would re-instate the behaviour prior to change 4.52/TF/02. +This would re-instate the behaviour prior to change 4.52/PH/04. +------------------------------------------------------------------------------ + +(342) 26-Sep-05 T Log and maybe defer odd values for condition pre-condition + +Odd values for "condition" in an ACL cause it to defer. In a router, they are +treated as "true". At least they should be logged in a router, and perhaps they +should also defer, for compatibility with ACLs. +------------------------------------------------------------------------------ + +(343) 03-Oct-05 M A query-style lookup for scanning flat files + +The natural syntax for this would be to use a regex, like this: +${lookup regex{/some/file regex}{found-string}{not-found-string}} +However, it would be natural to want to use $1 etc in the found-string; this +would be hard because of the lookup caching (if repeated, the lookup won't +actually be done and therefore the numerical variables won't be set), and in +any case, even without caching (and it could, I suppose, be disabled for this +lookup) those variables are not in the right storage pool even if they were +preserved after the lookup. + +An alternative approach might be to implement something like this: + + ${scanfile{/some/file}{sub-expression}} + +where the sub-expression is expanded for every line in the file, with each line +in turn being put into $value. This is like a conditional ${readfile, and in +fact ${readfile could be written using ${scanfile. It would be nice to find a +way of stopping the scan once something has happened. The only thing I can +think of is to invent a variable that changes when scanning a line generates +some non-null text, and then always to stop on a forced failure. That would +allow expressions like this: + + ${scanfile{/some/file} + { + ${if eq{$generated}{}{${if match{regex}{$value}{something}}} fail} + }} + +It's all rather clumsy. Once a line has matched and generated some text, the +next iteration would stop the scan. Another thought: maybe use $scanline +instead of $value (to save confusion) and have $scantext containing everything +that's been generated so far. That sounds pretty flexible. +------------------------------------------------------------------------------ + +(344) 10-Oct-05 M Make debug_print work in authenticators +------------------------------------------------------------------------------ + +(345) 14-Oct-05 M Standardize rejection messages + +"The parsing for rejection lines is a bit of a mess, and fairly +unmaintainable. Do you think it would be possible to standardise +rejection/refusal log messages? How about something like: + +(|16 Spaces) *< (Connection|MAIL|RCPT|HELO|EHLO|DATA) rejected (from +
)?: (\(\))?" +------------------------------------------------------------------------------ + +(346) 20-Oct-05 S Set $domain and $local_part in retry matching + +Currently, these variables are unset. Make it like rewrite matching. +------------------------------------------------------------------------------ + +(347) 15-Nov-05 M Arrange to expand data from wildlsearch + +This would allow keys that are regular expressions to set up numerical +variables that are included in the data. This has to be done inside the lookup +code, because of caching. Probably means we have to invent ewildlsearch and +enwildlsearch. +------------------------------------------------------------------------------ + +(351) 31-Mar-06 ? Allow some/all/a few internal variables to be set + +The original idea was to allow "set authenticated = x" to pretend a connection +is authenticated after other conditions are true. This can, of course, be +packaged up using macros in other ways. Setting other variables could cause +problems. +------------------------------------------------------------------------------ + +(352) 04-Apr-06 S Add +accept_defer for host lists (and maybe others) + +At present, a defer causes a delivery defer. For non-critical ACLs there are +times when it may be better to accept. See also 226 and 289. +------------------------------------------------------------------------------ + +(354) 30-Jun-06 ? Extensions to SMTP error codes + +A number of ideas arose following a discussion on the mailing list. I record +them here so that they don't get lost. The motivations were to support the 551 +bounce code and enhanced status codes. Suggestions are to add a new ACL +feature, possibly one of: + + errorcode = 511 + control = errorcode=551 + message = 551 xxxx + +where in the last case, it's recognized by being 3 digits. In all cases, the +first digit must be "right" for the circumstance - ignore or fault if not? + +To handle ESC, perhaps a new variable called $smtp_errorcode, settable by an +option in a router when it fails, would do the trick. It could be used in any +of the above modifiers. +------------------------------------------------------------------------------ + +(355) 30-Jun-06 ? Facility to permit experiments with SMTP extensions + +This is what was suggested: + +- adding some expansion variables: $ehlo_extensions (which will + hold the remote server supported smtp extensions announced + in the ehlo) and $rcpt_arguments with any RCPT extra argument + +- a main configuration option for adding ehlo extensions to the + ehlo response, like: + + extra_ehlo_extensions = XFOO : XBAR + +- a extra option for the smtp transport to add arguments to + the RCPT TO command, like: + + rcpt_args = FOO=BAR (will make exim issue RCPT TO: FOO=BAR + when delivering that message) + +- a new acl for unknown smtp commands + +This should be very simple to implement and will allow to make +some experiments and implement custom extensions, i.e. one to +known if remote client will redirect on 551 or not. Also the acl +for unknown smtp command could be used for other purposes, like +to detect and react to some kiddies that send things like +http://... on the smtp port. ------------------------------------------------------------------------------ ---- HWM 341 ------------------------------------------------------------------ +--- HWM 355 ------------------------------------------------------------------ ---------------------------- End of WishList ---------------------------------