X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/da47dd4d092ba35e4f8ff055d79693cc1266c816..1d28cc061677bd07d9bed48dd84bd5c590247043:/src/src/EDITME

diff --git a/src/src/EDITME b/src/src/EDITME
index 13dc49414..625df18f5 100644
--- a/src/src/EDITME
+++ b/src/src/EDITME
@@ -1,6 +1,8 @@
 ##################################################
 #          The Exim mail transport agent         #
 ##################################################
+# Copyright (c) The Exim Maintainers 2022
+# SPDX-License-Identifier: GPL-2.0-or-later
 
 # This is the template for Exim's main build-time configuration file. It
 # contains settings that are independent of any operating system. These are
@@ -198,7 +200,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # the libraries and headers are installed, as the pkg-config .pc
 # specification should include all -L/-I information necessary.
 # Enabling the USE_*_PC options should be sufficient. If not using
-# pkg-config, then you have to specify the libraries, and you mmight
+# pkg-config, then you have to specify the libraries, and you might
 # need to specify the locations too.
 
 # Uncomment the following lines if you want
@@ -207,7 +209,7 @@ SPOOL_DIRECTORY=/var/spool/exim
 # Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
 # below.
 
-# If you are buliding with TLS, the library configuration must be done:
+# If you are building with TLS, the library configuration must be done:
 
 # Uncomment this if you are using OpenSSL
 # USE_OPENSSL=yes
@@ -457,27 +459,27 @@ LOOKUP_DNSDB=yes
 
 
 #------------------------------------------------------------------------------
-# The PCRE library is required for Exim.  There is no longer an embedded
+# The PCRE2 library is required for Exim.  There is no longer an embedded
 # version of the PCRE library included with the source code, instead you
-# must use a system library or build your own copy of PCRE.
+# must use a system library or build your own copy of PCRE2.
 # In either case you must specify the library link info here.  If the
-# PCRE header files are not in the standard search path you must also
+# PCRE2 header files are not in the standard search path you must also
 # modify the INCLUDE path (above)
 #
 # Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
 # to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
 # too if needed.
 
-PCRE_CONFIG=yes
-# PCRE_LIBS=-lpcre
+PCRE2_CONFIG=yes
+# PCRE_LIBS=-lpcre2
 
 
 #------------------------------------------------------------------------------
-# Comment out the following line to remove DANE support
-# Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# forces you to have SUPPORT_TLS enabled (the default).  For DANE under
-# GnuTLS we need an additional library.  See TLS_LIBS or USE_GNUTLS_PC
-# below.
+# Comment out the following line to remove DANE support.
+# Note: DANE support requires DNSSEC support (the default) and
+# SUPPORT_TLS (the default).  For DANE under GnuTLS we need an additional
+# library.  See TLS_LIBS or USE_GNUTLS_PC below.
+
 SUPPORT_DANE=yes
 
 #------------------------------------------------------------------------------
@@ -495,6 +497,13 @@ SUPPORT_DANE=yes
 # LOOKUP_INCLUDE +=-I /usr/local/include
 # LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 -llmdb
 
+#------------------------------------------------------------------------------
+# If you included LOOKUP_LMDB above you will need the library. Depending
+# on where installed you may also need an include directory
+#
+# LOOKUP_INCLUDE += -I/usr/local/include
+# LOOKUP_LIBS += -llmdb
+
 
 #------------------------------------------------------------------------------
 # Compiling the Exim monitor: If you want to compile the Exim monitor, a
@@ -561,7 +570,7 @@ DISABLE_MAL_MKS=yes
 # By default, Exim has support for checking the AD bit in a DNS response, to
 # determine if DNSSEC validation was successful.  If your system libraries
 # do not support that bit, then set DISABLE_DNSSEC to "yes"
-# Note: Enabling SUPPORT_DANE unconditionally overrides this setting.
+# Note: DNSSEC is required for DANE support.
 
 # DISABLE_DNSSEC=yes
 
@@ -569,16 +578,16 @@ DISABLE_MAL_MKS=yes
 # DISABLE_EVENT=yes
 
 
-# Uncomment this line to include support for early pipelining, per
+# Uncomment this line to remove support for early pipelining, per
 # https://datatracker.ietf.org/doc/draft-harris-early-pipe/
-# SUPPORT_PIPE_CONNECT=yes
+# DISABLE_PIPE_CONNECT=yes
 
 
 # Uncomment the following to remove the fast-ramp two-phase-queue-run support
 # DISABLE_QUEUE_RAMP=yes
 
 # Uncomment the following lines to add SRS (Sender Rewriting Scheme) support
-# using only native facilities.  See EXPERIMENTAL_SRS_ALT for an alternative.
+# using only native facilities.
 # SUPPORT_SRS=yes
 
 
@@ -589,20 +598,10 @@ DISABLE_MAL_MKS=yes
 
 # Uncomment the following line to add support for talking to dccifd.  This
 # defaults the socket path to /usr/local/dcc/var/dccifd.
-# Doing so will also explicitly turn on the WITH_CONTENT_SCAN option.
+# This support also requires WITH_CONTENT_SCAN enabled.
 
 # EXPERIMENTAL_DCC=yes
 
-# Uncomment the following lines to add SRS (Sender rewriting scheme) support
-# using the implementation in linbsrs_alt.
-# You need to have libsrs_alt installed on your system (srs.mirtol.com).
-# Depending on where it is installed you may have to edit the CFLAGS and
-# LDFLAGS lines.
-
-# EXPERIMENTAL_SRS_ALT=yes
-# CFLAGS  += -I/usr/local/include
-# LDFLAGS += -lsrs_alt
-
 # Uncomment the following line to add DMARC checking capability, implemented
 # using libopendmarc libraries. You must have SPF and DKIM support enabled also.
 # SUPPORT_DMARC=yes
@@ -611,6 +610,11 @@ DISABLE_MAL_MKS=yes
 # Uncomment the following if you need to change the default. You can
 # override it at runtime (main config option dmarc_tld_file)
 # DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
+#
+# Library version libopendmarc-1.4.1-1.fc33.x86_64  (on Fedora 33) is known broken;
+# 1.3.2-3 works.  It seems that the OpenDMARC project broke their API.
+# Use this option if you need to build with an old library (1.3.x)
+# DMARC_API=100300
 
 # Uncomment the following line to add ARC (Authenticated Received Chain)
 # support.  You must have SPF and DKIM support enabled also.
@@ -1490,4 +1494,9 @@ EXIM_TMPDIR="/tmp"
 # For development, add this to include code to time various stages and report.
 # CFLAGS += -DMEASURE_TIMING
 
+# For a very slightly smaller build, for constrained systems, uncomment this.
+# The feature involved is purely for debugging.
+
+# DISABLE_CLIENT_CMD_LOG=yes
+
 # End of EDITME for Exim 4.