X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/d7d7b7b91dd75cec636fc144da7e27eed860f971..3fc73bdc7aa8ac2b2b290033f602bdb947ae8049:/src/src/transports/smtp.c diff --git a/src/src/transports/smtp.c b/src/src/transports/smtp.c index bb8c6e018..bca8c4941 100644 --- a/src/src/transports/smtp.c +++ b/src/src/transports/smtp.c @@ -1,19 +1,13 @@ -/* $Cambridge: exim/src/src/transports/smtp.c,v 1.20 2006/02/07 11:19:03 ph10 Exp $ */ - /************************************************* * Exim - an Internet mail transport agent * *************************************************/ -/* Copyright (c) University of Cambridge 1995 - 2006 */ +/* Copyright (c) University of Cambridge 1995 - 2018 */ /* See the file NOTICE for conditions of use and distribution. */ #include "../exim.h" #include "smtp.h" -#define PENDING 256 -#define PENDING_DEFER (PENDING + DEFER) -#define PENDING_OK (PENDING + OK) - /* Options specific to the smtp transport. This transport also supports LMTP over TCP/IP. The options must be in alphabetic order (note that "_" comes @@ -21,38 +15,67 @@ before the lower case letters). Some live in the transport_instance block so as to be publicly visible; these are flagged with opt_public. */ optionlist smtp_transport_options[] = { + { "*expand_multi_domain", opt_stringptr | opt_hidden | opt_public, + (void *)offsetof(transport_instance, expand_multi_domain) }, + { "*expand_retry_include_ip_address", opt_stringptr | opt_hidden, + (void *)(offsetof(smtp_transport_options_block, expand_retry_include_ip_address)) }, + + { "address_retry_include_sender", opt_bool, + (void *)offsetof(smtp_transport_options_block, address_retry_include_sender) }, { "allow_localhost", opt_bool, (void *)offsetof(smtp_transport_options_block, allow_localhost) }, +#ifdef EXPERIMENTAL_ARC + { "arc_sign", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, arc_sign) }, +#endif { "authenticated_sender", opt_stringptr, (void *)offsetof(smtp_transport_options_block, authenticated_sender) }, + { "authenticated_sender_force", opt_bool, + (void *)offsetof(smtp_transport_options_block, authenticated_sender_force) }, { "command_timeout", opt_time, (void *)offsetof(smtp_transport_options_block, command_timeout) }, { "connect_timeout", opt_time, (void *)offsetof(smtp_transport_options_block, connect_timeout) }, { "connection_max_messages", opt_int | opt_public, (void *)offsetof(transport_instance, connection_max_messages) }, +# ifdef SUPPORT_DANE + { "dane_require_tls_ciphers", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dane_require_tls_ciphers) }, +# endif { "data_timeout", opt_time, (void *)offsetof(smtp_transport_options_block, data_timeout) }, { "delay_after_cutoff", opt_bool, (void *)offsetof(smtp_transport_options_block, delay_after_cutoff) }, -#ifdef EXPERIMENTAL_DOMAINKEYS - { "dk_canon", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_canon) }, - { "dk_domain", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_domain) }, - { "dk_headers", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_headers) }, - { "dk_private_key", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_private_key) }, - { "dk_selector", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_selector) }, - { "dk_strict", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, dk_strict) }, +#ifndef DISABLE_DKIM + { "dkim_canon", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_canon) }, + { "dkim_domain", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_domain) }, + { "dkim_hash", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_hash) }, + { "dkim_identity", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_identity) }, + { "dkim_private_key", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_private_key) }, + { "dkim_selector", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_selector) }, + { "dkim_sign_headers", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_sign_headers) }, + { "dkim_strict", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_strict) }, + { "dkim_timestamps", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dkim.dkim_timestamps) }, #endif { "dns_qualify_single", opt_bool, (void *)offsetof(smtp_transport_options_block, dns_qualify_single) }, { "dns_search_parents", opt_bool, (void *)offsetof(smtp_transport_options_block, dns_search_parents) }, + { "dnssec_request_domains", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dnssec.request) }, + { "dnssec_require_domains", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dnssec.require) }, + { "dscp", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, dscp) }, { "fallback_hosts", opt_stringptr, (void *)offsetof(smtp_transport_options_block, fallback_hosts) }, { "final_timeout", opt_time, @@ -65,30 +88,62 @@ optionlist smtp_transport_options[] = { (void *)offsetof(smtp_transport_options_block, hosts) }, { "hosts_avoid_esmtp", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_avoid_esmtp) }, - #ifdef SUPPORT_TLS + { "hosts_avoid_pipelining", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_avoid_pipelining) }, +#ifdef SUPPORT_TLS { "hosts_avoid_tls", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_avoid_tls) }, - #endif +#endif { "hosts_max_try", opt_int, (void *)offsetof(smtp_transport_options_block, hosts_max_try) }, { "hosts_max_try_hardlimit", opt_int, (void *)offsetof(smtp_transport_options_block, hosts_max_try_hardlimit) }, - #ifdef SUPPORT_TLS +#ifdef SUPPORT_TLS { "hosts_nopass_tls", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_nopass_tls) }, - #endif + { "hosts_noproxy_tls", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_noproxy_tls) }, +#endif { "hosts_override", opt_bool, (void *)offsetof(smtp_transport_options_block, hosts_override) }, { "hosts_randomize", opt_bool, (void *)offsetof(smtp_transport_options_block, hosts_randomize) }, +#if defined(SUPPORT_TLS) && !defined(DISABLE_OCSP) + { "hosts_request_ocsp", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_request_ocsp) }, +#endif { "hosts_require_auth", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_require_auth) }, - #ifdef SUPPORT_TLS +#ifdef SUPPORT_TLS +# ifdef SUPPORT_DANE + { "hosts_require_dane", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_require_dane) }, +# endif +# ifndef DISABLE_OCSP + { "hosts_require_ocsp", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_require_ocsp) }, +# endif { "hosts_require_tls", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_require_tls) }, - #endif +#endif { "hosts_try_auth", opt_stringptr, (void *)offsetof(smtp_transport_options_block, hosts_try_auth) }, + { "hosts_try_chunking", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_try_chunking) }, +#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE) + { "hosts_try_dane", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_try_dane) }, +#endif + { "hosts_try_fastopen", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_try_fastopen) }, +#ifndef DISABLE_PRDR + { "hosts_try_prdr", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_try_prdr) }, +#endif +#ifdef SUPPORT_TLS + { "hosts_verify_avoid_tls", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, hosts_verify_avoid_tls) }, +#endif { "interface", opt_stringptr, (void *)offsetof(smtp_transport_options_block, interface) }, { "keepalive", opt_bool, @@ -97,99 +152,188 @@ optionlist smtp_transport_options[] = { (void *)offsetof(smtp_transport_options_block, lmtp_ignore_quota) }, { "max_rcpt", opt_int | opt_public, (void *)offsetof(transport_instance, max_addresses) }, - { "multi_domain", opt_bool | opt_public, + { "multi_domain", opt_expand_bool | opt_public, (void *)offsetof(transport_instance, multi_domain) }, { "port", opt_stringptr, (void *)offsetof(smtp_transport_options_block, port) }, { "protocol", opt_stringptr, (void *)offsetof(smtp_transport_options_block, protocol) }, - { "retry_include_ip_address", opt_bool, + { "retry_include_ip_address", opt_expand_bool, (void *)offsetof(smtp_transport_options_block, retry_include_ip_address) }, { "serialize_hosts", opt_stringptr, (void *)offsetof(smtp_transport_options_block, serialize_hosts) }, { "size_addition", opt_int, (void *)offsetof(smtp_transport_options_block, size_addition) } - #ifdef SUPPORT_TLS +#ifdef SUPPORT_SOCKS + ,{ "socks_proxy", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, socks_proxy) } +#endif +#ifdef SUPPORT_TLS ,{ "tls_certificate", opt_stringptr, (void *)offsetof(smtp_transport_options_block, tls_certificate) }, { "tls_crl", opt_stringptr, (void *)offsetof(smtp_transport_options_block, tls_crl) }, + { "tls_dh_min_bits", opt_int, + (void *)offsetof(smtp_transport_options_block, tls_dh_min_bits) }, { "tls_privatekey", opt_stringptr, (void *)offsetof(smtp_transport_options_block, tls_privatekey) }, - { "tls_require_ciphers", opt_stringptr, + { "tls_require_ciphers", opt_stringptr, (void *)offsetof(smtp_transport_options_block, tls_require_ciphers) }, + { "tls_sni", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, tls_sni) }, { "tls_tempfail_tryclear", opt_bool, (void *)offsetof(smtp_transport_options_block, tls_tempfail_tryclear) }, + { "tls_try_verify_hosts", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, tls_try_verify_hosts) }, + { "tls_verify_cert_hostnames", opt_stringptr, + (void *)offsetof(smtp_transport_options_block,tls_verify_cert_hostnames)}, { "tls_verify_certificates", opt_stringptr, - (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) } - #endif + (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) }, + { "tls_verify_hosts", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) }, +#endif +#ifdef SUPPORT_I18N + { "utf8_downconvert", opt_stringptr, + (void *)offsetof(smtp_transport_options_block, utf8_downconvert) }, +#endif }; /* Size of the options list. An extern variable has to be used so that its address can appear in the tables drtables.c. */ -int smtp_transport_options_count = - sizeof(smtp_transport_options)/sizeof(optionlist); +int smtp_transport_options_count = nelem(smtp_transport_options); + + +#ifdef MACRO_PREDEF + +/* Dummy values */ +smtp_transport_options_block smtp_transport_option_defaults = {0}; +void smtp_transport_init(transport_instance *tblock) {} +BOOL smtp_transport_entry(transport_instance *tblock, address_item *addr) {return FALSE;} +void smtp_transport_closedown(transport_instance *tblock) {} + +#else /*!MACRO_PREDEF*/ + /* Default private options block for the smtp transport. */ smtp_transport_options_block smtp_transport_option_defaults = { - NULL, /* hosts */ - NULL, /* fallback_hosts */ - NULL, /* hostlist */ - NULL, /* fallback_hostlist */ - NULL, /* authenticated_sender */ - US"$primary_hostname", /* helo_data */ - NULL, /* interface */ - NULL, /* port */ - US"smtp", /* protocol */ - NULL, /* serialize_hosts */ - NULL, /* hosts_try_auth */ - NULL, /* hosts_require_auth */ - NULL, /* hosts_require_tls */ - NULL, /* hosts_avoid_tls */ - NULL, /* hosts_avoid_esmtp */ - NULL, /* hosts_nopass_tls */ - 5*60, /* command_timeout */ - 5*60, /* connect_timeout; shorter system default overrides */ - 5*60, /* data timeout */ - 10*60, /* final timeout */ - 1024, /* size_addition */ - 5, /* hosts_max_try */ - 50, /* hosts_max_try_hardlimit */ - FALSE, /* allow_localhost */ - FALSE, /* gethostbyname */ - TRUE, /* dns_qualify_single */ - FALSE, /* dns_search_parents */ - TRUE, /* delay_after_cutoff */ - FALSE, /* hosts_override */ - FALSE, /* hosts_randomize */ - TRUE, /* keepalive */ - FALSE, /* lmtp_ignore_quota */ - TRUE /* retry_include_ip_address */ - #ifdef SUPPORT_TLS - ,NULL, /* tls_certificate */ - NULL, /* tls_crl */ - NULL, /* tls_privatekey */ - NULL, /* tls_require_ciphers */ - NULL, /* tls_verify_certificates */ - TRUE /* tls_tempfail_tryclear */ - #endif - #ifdef EXPERIMENTAL_DOMAINKEYS - ,NULL, /* dk_canon */ - NULL, /* dk_domain */ - NULL, /* dk_headers */ - NULL, /* dk_private_key */ - NULL, /* dk_selector */ - NULL /* dk_strict */ - #endif + .hosts = NULL, + .fallback_hosts = NULL, + .hostlist = NULL, + .fallback_hostlist = NULL, + .helo_data = US"$primary_hostname", + .interface = NULL, + .port = NULL, + .protocol = US"smtp", + .dscp = NULL, + .serialize_hosts = NULL, + .hosts_try_auth = NULL, + .hosts_require_auth = NULL, + .hosts_try_chunking = US"*", +#ifdef SUPPORT_DANE + .hosts_try_dane = NULL, + .hosts_require_dane = NULL, + .dane_require_tls_ciphers = NULL, +#endif + .hosts_try_fastopen = NULL, +#ifndef DISABLE_PRDR + .hosts_try_prdr = US"*", +#endif +#ifndef DISABLE_OCSP + .hosts_request_ocsp = US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */ + .hosts_require_ocsp = NULL, +#endif + .hosts_require_tls = NULL, + .hosts_avoid_tls = NULL, + .hosts_verify_avoid_tls = NULL, + .hosts_avoid_pipelining = NULL, + .hosts_avoid_esmtp = NULL, +#ifdef SUPPORT_TLS + .hosts_nopass_tls = NULL, + .hosts_noproxy_tls = US"*", +#endif + .command_timeout = 5*60, + .connect_timeout = 5*60, + .data_timeout = 5*60, + .final_timeout = 10*60, + .size_addition = 1024, + .hosts_max_try = 5, + .hosts_max_try_hardlimit = 50, + .address_retry_include_sender = TRUE, + .allow_localhost = FALSE, + .authenticated_sender_force = FALSE, + .gethostbyname = FALSE, + .dns_qualify_single = TRUE, + .dns_search_parents = FALSE, + .dnssec = { .request=NULL, .require=NULL }, + .delay_after_cutoff = TRUE, + .hosts_override = FALSE, + .hosts_randomize = FALSE, + .keepalive = TRUE, + .lmtp_ignore_quota = FALSE, + .expand_retry_include_ip_address = NULL, + .retry_include_ip_address = TRUE, +#ifdef SUPPORT_SOCKS + .socks_proxy = NULL, +#endif +#ifdef SUPPORT_TLS + .tls_certificate = NULL, + .tls_crl = NULL, + .tls_privatekey = NULL, + .tls_require_ciphers = NULL, + .tls_sni = NULL, + .tls_verify_certificates = US"system", + .tls_dh_min_bits = EXIM_CLIENT_DH_DEFAULT_MIN_BITS, + .tls_tempfail_tryclear = TRUE, + .tls_verify_hosts = NULL, + .tls_try_verify_hosts = US"*", + .tls_verify_cert_hostnames = US"*", +#endif +#ifdef SUPPORT_I18N + .utf8_downconvert = NULL, +#endif +#ifndef DISABLE_DKIM + .dkim = + {.dkim_domain = NULL, + .dkim_identity = NULL, + .dkim_private_key = NULL, + .dkim_selector = NULL, + .dkim_canon = NULL, + .dkim_sign_headers = NULL, + .dkim_strict = NULL, + .dkim_hash = US"sha256", + .dkim_timestamps = NULL, + .dot_stuffed = FALSE, + .force_bodyhash = FALSE, +# ifdef EXPERIMENTAL_ARC + .arc_signspec = NULL, +# endif + }, +# ifdef EXPERIMENTAL_ARC + .arc_sign = NULL, +# endif +#endif }; +/* some DSN flags for use later */ + +static int rf_list[] = {rf_notify_never, rf_notify_success, + rf_notify_failure, rf_notify_delay }; + +static uschar *rf_names[] = { US"NEVER", US"SUCCESS", US"FAILURE", US"DELAY" }; + + /* Local statics */ -static uschar *smtp_command; /* Points to last cmd for error messages */ -static uschar *mail_command; /* Points to MAIL cmd for error messages */ +static uschar *smtp_command; /* Points to last cmd for error messages */ +static uschar *mail_command; /* Points to MAIL cmd for error messages */ +static uschar *data_command = US""; /* Points to DATA cmd for error messages */ +static BOOL update_waiting; /* TRUE to update the "wait" database */ + +/*XXX move to smtp_context */ +static BOOL pipelining_active; /* current transaction is in pipe mode */ /************************************************* @@ -200,13 +344,15 @@ static uschar *mail_command; /* Points to MAIL cmd for error messages */ but before running it in a sub-process. It is used for two things: (1) To set the fallback host list in addresses, when delivering. - (2) To pass back the interface, port, and protocol options, for use during - callout verification. + (2) To pass back the interface, port, protocol, and other options, for use + during callout verification. Arguments: tblock pointer to the transport instance block addrlist list of addresses about to be transported tf if not NULL, pointer to block in which to return options + uid the uid that will be set (not used) + gid the gid that will be set (not used) errmsg place for error message (not used) Returns: OK always (FAIL, DEFER not used) @@ -214,16 +360,18 @@ Returns: OK always (FAIL, DEFER not used) static int smtp_transport_setup(transport_instance *tblock, address_item *addrlist, - transport_feedback *tf, uschar **errmsg) + transport_feedback *tf, uid_t uid, gid_t gid, uschar **errmsg) { smtp_transport_options_block *ob = (smtp_transport_options_block *)(tblock->options_block); errmsg = errmsg; /* Keep picky compilers happy */ +uid = uid; +gid = gid; /* Pass back options if required. This interface is getting very messy. */ -if (tf != NULL) +if (tf) { tf->interface = ob->interface; tf->port = ob->port; @@ -234,6 +382,7 @@ if (tf != NULL) tf->gethostbyname = ob->gethostbyname; tf->qualify_single = ob->dns_qualify_single; tf->search_parents = ob->dns_search_parents; + tf->helo_data = ob->helo_data; } /* Set the fallback host list for all the addresses that don't have fallback @@ -241,11 +390,8 @@ host lists, provided that the local host wasn't present in the original host list. */ if (!testflag(addrlist, af_local_host_removed)) - { - for (; addrlist != NULL; addrlist = addrlist->next) - if (addrlist->fallback_hosts == NULL) - addrlist->fallback_hosts = ob->fallback_hostlist; - } + for (; addrlist; addrlist = addrlist->next) + if (!addrlist->fallback_hosts) addrlist->fallback_hosts = ob->fallback_hostlist; return OK; } @@ -278,7 +424,8 @@ if (tblock->retry_use_local_part == TRUE_UNSET) /* Set the default port according to the protocol */ if (ob->port == NULL) - ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" : US"smtp"; + ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" : + (strcmpic(ob->protocol, US"smtps") == 0)? US"smtps" : US"smtp"; /* Set up the setup entry point, to be called before subprocesses for this transport. */ @@ -321,6 +468,9 @@ Arguments: msg to put in each address's message field rc to put in each address's transport_return field pass_message if TRUE, set the "pass message" flag in the address + host if set, mark addrs as having used this host + smtp_greeting from peer + helo_response from peer If errno_value has the special value ERRNO_CONNECTTIMEOUT, ETIMEDOUT is put in the errno field, and RTEF_CTOUT is ORed into the more_errno field, to indicate @@ -331,7 +481,11 @@ Returns: nothing static void set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc, - BOOL pass_message) + BOOL pass_message, host_item * host +#ifdef EXPERIMENTAL_DSN_INFO + , const uschar * smtp_greeting, const uschar * helo_response +#endif + ) { address_item *addr; int orvalue = 0; @@ -340,20 +494,43 @@ if (errno_value == ERRNO_CONNECTTIMEOUT) errno_value = ETIMEDOUT; orvalue = RTEF_CTOUT; } -for (addr = addrlist; addr != NULL; addr = addr->next) - { - if (addr->transport_return < PENDING) continue; - addr->basic_errno = errno_value; - addr->more_errno |= orvalue; - if (msg != NULL) +for (addr = addrlist; addr; addr = addr->next) + if (addr->transport_return >= PENDING) { - addr->message = msg; - if (pass_message) setflag(addr, af_pass_message); + addr->basic_errno = errno_value; + addr->more_errno |= orvalue; + if (msg) + { + addr->message = msg; + if (pass_message) setflag(addr, af_pass_message); + } + addr->transport_return = rc; + if (host) + { + addr->host_used = host; +#ifdef EXPERIMENTAL_DSN_INFO + if (smtp_greeting) + {uschar * s = Ustrchr(smtp_greeting, '\n'); if (s) *s = '\0';} + addr->smtp_greeting = smtp_greeting; + + if (helo_response) + {uschar * s = Ustrchr(helo_response, '\n'); if (s) *s = '\0';} + addr->helo_response = helo_response; +#endif + } } - addr->transport_return = rc; - } } +static void +set_errno_nohost(address_item *addrlist, int errno_value, uschar *msg, int rc, + BOOL pass_message) +{ +set_errno(addrlist, errno_value, msg, rc, pass_message, NULL +#ifdef EXPERIMENTAL_DSN_INFO + , NULL, NULL +#endif + ); +} /************************************************* @@ -372,90 +549,73 @@ Arguments: more_errno from the top address for use with ERRNO_FILTER_FAIL buffer the SMTP response buffer yield where to put a one-digit SMTP response code - message where to put an errror message + message where to put an error message pass_message set TRUE if message is an SMTP response Returns: TRUE if an SMTP "QUIT" command should be sent, else FALSE */ -static BOOL check_response(host_item *host, int *errno_value, int more_errno, +static BOOL +check_response(host_item *host, int *errno_value, int more_errno, uschar *buffer, int *yield, uschar **message, BOOL *pass_message) { -uschar *pl = US""; - -if (smtp_use_pipelining && - (Ustrcmp(smtp_command, "MAIL") == 0 || - Ustrcmp(smtp_command, "RCPT") == 0 || - Ustrcmp(smtp_command, "DATA") == 0)) - pl = US"pipelined "; +uschar * pl = pipelining_active ? US"pipelined " : US""; +const uschar * s; *yield = '4'; /* Default setting is to give a temporary error */ -/* Handle response timeout */ - -if (*errno_value == ETIMEDOUT) - { - *message = US string_sprintf("SMTP timeout while connected to %s [%s] " - "after %s%s", host->name, host->address, pl, smtp_command); - if (transport_count > 0) - *message = US string_sprintf("%s (%d bytes written)", *message, - transport_count); - return FALSE; - } - -/* Handle malformed SMTP response */ - -if (*errno_value == ERRNO_SMTPFORMAT) - { - uschar *malfresp = string_printing(buffer); - while (isspace(*malfresp)) malfresp++; - if (*malfresp == 0) - *message = string_sprintf("Malformed SMTP reply (an empty line) from " - "%s [%s] in response to %s%s", host->name, host->address, pl, - smtp_command); - else - *message = string_sprintf("Malformed SMTP reply from %s [%s] in response " - "to %s%s: %s", host->name, host->address, pl, smtp_command, malfresp); - return FALSE; - } - -/* Handle a failed filter process error; can't send QUIT as we mustn't -end the DATA. */ - -if (*errno_value == ERRNO_FILTER_FAIL) - { - *message = US string_sprintf("transport filter process failed (%d)%s", - more_errno, - (more_errno == EX_EXECFAILED)? ": unable to execute command" : ""); - return FALSE; - } - -/* Handle a failed add_headers expansion; can't send QUIT as we mustn't -end the DATA. */ - -if (*errno_value == ERRNO_CHHEADER_FAIL) - { - *message = - US string_sprintf("failed to expand headers_add or headers_remove: %s", - expand_string_message); - return FALSE; - } - -/* Handle failure to write a complete data block */ - -if (*errno_value == ERRNO_WRITEINCOMPLETE) +switch(*errno_value) { - *message = US string_sprintf("failed to write a data block"); - return FALSE; + case ETIMEDOUT: /* Handle response timeout */ + *message = US string_sprintf("SMTP timeout after %s%s", + pl, smtp_command); + if (transport_count > 0) + *message = US string_sprintf("%s (%d bytes written)", *message, + transport_count); + return FALSE; + + case ERRNO_SMTPFORMAT: /* Handle malformed SMTP response */ + s = string_printing(buffer); + while (isspace(*s)) s++; + *message = *s == 0 + ? string_sprintf("Malformed SMTP reply (an empty line) " + "in response to %s%s", pl, smtp_command) + : string_sprintf("Malformed SMTP reply in response to %s%s: %s", + pl, smtp_command, s); + return FALSE; + + case ERRNO_FILTER_FAIL: /* Handle a failed filter process error; + can't send QUIT as we mustn't end the DATA. */ + *message = string_sprintf("transport filter process failed (%d)%s", + more_errno, + more_errno == EX_EXECFAILED ? ": unable to execute command" : ""); + return FALSE; + + case ERRNO_CHHEADER_FAIL: /* Handle a failed add_headers expansion; + can't send QUIT as we mustn't end the DATA. */ + *message = + string_sprintf("failed to expand headers_add or headers_remove: %s", + expand_string_message); + return FALSE; + + case ERRNO_WRITEINCOMPLETE: /* failure to write a complete data block */ + *message = string_sprintf("failed to write a data block"); + return FALSE; + +#ifdef SUPPORT_I18N + case ERRNO_UTF8_FWD: /* no advertised SMTPUTF8, for international message */ + *message = US"utf8 support required but not offered for forwarding"; + DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message); + return TRUE; +#endif } /* Handle error responses from the remote mailer. */ if (buffer[0] != 0) { - uschar *s = string_printing(buffer); - *message = US string_sprintf("SMTP error from remote mail server after %s%s: " - "host %s [%s]: %s", pl, smtp_command, host->name, host->address, s); + *message = string_sprintf("SMTP error from remote mail server after %s%s: " + "%s", pl, smtp_command, s = string_printing(buffer)); *pass_message = TRUE; *yield = buffer[0]; return TRUE; @@ -470,10 +630,11 @@ assume the connection is now dead. */ if (*errno_value == 0 || *errno_value == ECONNRESET) { *errno_value = ERRNO_SMTPCLOSED; - *message = US string_sprintf("Remote host %s [%s] closed connection " - "in response to %s%s", host->name, host->address, pl, smtp_command); + *message = US string_sprintf("Remote host closed connection " + "in response to %s%s", pl, smtp_command); } -else *message = US string_sprintf("%s [%s]", host->name, host->address); +else + *message = US string_sprintf("%s [%s]", host->name, host->address); return FALSE; } @@ -487,39 +648,98 @@ return FALSE; /* This writes to the main log and to the message log. Arguments: - addr the address item containing error information host the current host + detail the current message (addr_item->message) + basic_errno the errno (addr_item->basic_errno) Returns: nothing */ static void -write_logs(address_item *addr, host_item *host) +write_logs(const host_item *host, const uschar *suffix, int basic_errno) { -if (addr->message != NULL) + + +uschar *message = LOGGING(outgoing_port) + ? string_sprintf("H=%s [%s]:%d", host->name, host->address, + host->port == PORT_NONE ? 25 : host->port) + : string_sprintf("H=%s [%s]", host->name, host->address); + +if (suffix) { - uschar *message = addr->message; - if (addr->basic_errno > 0) - message = string_sprintf("%s: %s", message, strerror(addr->basic_errno)); - log_write(0, LOG_MAIN, "%s", message); - deliver_msglog("%s %s\n", tod_stamp(tod_log), message); + message = string_sprintf("%s: %s", message, suffix); + if (basic_errno > 0) + message = string_sprintf("%s: %s", message, strerror(basic_errno)); } else - { - uschar *msg = - ((log_extra_selector & LX_outgoing_port) != 0)? - string_sprintf("%s [%s]:%d", host->name, host->address, - (host->port == PORT_NONE)? 25 : host->port) - : - string_sprintf("%s [%s]", host->name, host->address); - log_write(0, LOG_MAIN, "%s %s", msg, strerror(addr->basic_errno)); - deliver_msglog("%s %s %s\n", tod_stamp(tod_log), msg, - strerror(addr->basic_errno)); - } + message = string_sprintf("%s %s", message, exim_errstr(basic_errno)); + +log_write(0, LOG_MAIN, "%s", message); +deliver_msglog("%s %s\n", tod_stamp(tod_log), message); +} + +static void +msglog_line(host_item * host, uschar * message) +{ +deliver_msglog("%s H=%s [%s] %s\n", tod_stamp(tod_log), + host->name, host->address, message); } +#ifndef DISABLE_EVENT +/************************************************* +* Post-defer action * +*************************************************/ + +/* This expands an arbitrary per-transport string. + It might, for example, be used to write to the database log. + +Arguments: + addr the address item containing error information + host the current host + +Returns: nothing +*/ + +static void +deferred_event_raise(address_item *addr, host_item *host) +{ +uschar * action = addr->transport->event_action; +const uschar * save_domain; +uschar * save_local; + +if (!action) + return; + +save_domain = deliver_domain; +save_local = deliver_localpart; + +/*XXX would ip & port already be set up? */ +deliver_host_address = string_copy(host->address); +deliver_host_port = host->port == PORT_NONE ? 25 : host->port; +event_defer_errno = addr->basic_errno; + +router_name = addr->router->name; +transport_name = addr->transport->name; +deliver_domain = addr->domain; +deliver_localpart = addr->local_part; + +(void) event_raise(action, US"msg:host:defer", + addr->message + ? addr->basic_errno > 0 + ? string_sprintf("%s: %s", addr->message, strerror(addr->basic_errno)) + : string_copy(addr->message) + : addr->basic_errno > 0 + ? string_copy(US strerror(addr->basic_errno)) + : NULL); + +deliver_localpart = save_local; +deliver_domain = save_domain; +router_name = transport_name = NULL; +} +#endif + /************************************************* * Synchronize SMTP responses * *************************************************/ @@ -546,19 +766,11 @@ subsequent general error, it will get reset accordingly. If not, it will get converted to OK at the end. Arguments: - addrlist the complete address list - include_affixes TRUE if affixes include in RCPT - sync_addr ptr to the ptr of the one to start scanning at (updated) - host the host we are connected to - count the number of responses to read - pending_MAIL true if the first response is for MAIL - pending_DATA 0 if last command sent was not DATA - +1 if previously had a good recipient - -1 if not previously had a good recipient - inblock incoming SMTP block - timeout timeout value - buffer buffer for reading response - buffsize size of buffer + sx smtp connection context + count the number of responses to read + pending_DATA 0 if last command sent was not DATA + +1 if previously had a good recipient + -1 if not previously had a good recipient Returns: 3 if at least one address had 2xx and one had 5xx 2 if at least one address had 5xx but none had 2xx @@ -570,34 +782,51 @@ Returns: 3 if at least one address had 2xx and one had 5xx */ static int -sync_responses(address_item *addrlist, BOOL include_affixes, - address_item **sync_addr, host_item *host, int count, BOOL pending_MAIL, - int pending_DATA, smtp_inblock *inblock, int timeout, uschar *buffer, - int buffsize) +sync_responses(smtp_context * sx, int count, int pending_DATA) { -address_item *addr = *sync_addr; +address_item *addr = sx->sync_addr; +smtp_transport_options_block *ob = + (smtp_transport_options_block *)sx->tblock->options_block; int yield = 0; /* Handle the response for a MAIL command. On error, reinstate the original command in big_buffer for error message use, and flush any further pending responses before returning, except after I/O errors and timeouts. */ -if (pending_MAIL) +if (sx->pending_MAIL) { + DEBUG(D_transport) debug_printf("%s expect mail\n", __FUNCTION__); count--; - if (!smtp_read_response(inblock, buffer, buffsize, '2', timeout)) + if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '2', ob->command_timeout)) { + DEBUG(D_transport) debug_printf("bad response for MAIL\n"); Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */ - if (errno == 0 && buffer[0] != 0) + if (errno == 0 && sx->buffer[0] != 0) { uschar flushbuffer[4096]; + int save_errno = 0; + if (sx->buffer[0] == '4') + { + save_errno = ERRNO_MAIL4XX; + addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; + } while (count-- > 0) { - if (!smtp_read_response(inblock, flushbuffer, sizeof(flushbuffer), - '2', timeout) + if (!smtp_read_response(&sx->inblock, flushbuffer, sizeof(flushbuffer), + '2', ob->command_timeout) && (errno != 0 || flushbuffer[0] == 0)) break; } + errno = save_errno; + } + + if (pending_DATA) count--; /* Number of RCPT responses to come */ + while (count-- > 0) /* Mark any pending addrs with the host used */ + { + while (addr->transport_return != PENDING_DEFER) addr = addr->next; + addr->host_used = sx->host; + addr = addr->next; } return -3; } @@ -611,33 +840,42 @@ with an address by scanning for the next address whose status is PENDING_DEFER. while (count-- > 0) { - while (addr->transport_return != PENDING_DEFER) addr = addr->next; + while (addr->transport_return != PENDING_DEFER) + if (!(addr = addr->next)) + return -2; /* The address was accepted */ + addr->host_used = sx->host; - if (smtp_read_response(inblock, buffer, buffsize, '2', timeout)) + DEBUG(D_transport) debug_printf("%s expect rcpt\n", __FUNCTION__); + if (smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '2', ob->command_timeout)) { yield |= 1; addr->transport_return = PENDING_OK; /* If af_dr_retry_exists is set, there was a routing delay on this address; - ensure that any address-specific retry record is expunged. */ + ensure that any address-specific retry record is expunged. We do this both + for the basic key and for the version that also includes the sender. */ if (testflag(addr, af_dr_retry_exists)) + { + uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key, + sender_address); + retry_add_item(addr, altkey, rf_delete); retry_add_item(addr, addr->address_retry_key, rf_delete); + } } /* Timeout while reading the response */ else if (errno == ETIMEDOUT) { - int save_errno = errno; - uschar *message = string_sprintf("SMTP timeout while connected to %s [%s] " - "after RCPT TO:<%s>", host->name, host->address, - transport_rcpt_address(addr, include_affixes)); - set_errno(addrlist, save_errno, message, DEFER, FALSE); + uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>", + transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes)); + set_errno_nohost(sx->first_addr, ETIMEDOUT, message, DEFER, FALSE); retry_add_item(addr, addr->address_retry_key, 0); - host->update_waiting = FALSE; + update_waiting = FALSE; return -1; } @@ -646,10 +884,10 @@ while (count-- > 0) big_buffer for which we are checking the response, so the error message makes sense. */ - else if (errno != 0 || buffer[0] == 0) + else if (errno != 0 || sx->buffer[0] == 0) { string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>", - transport_rcpt_address(addr, include_affixes)); + transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes)); return -2; } @@ -659,14 +897,15 @@ while (count-- > 0) { addr->message = string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: " - "host %s [%s]: %s", transport_rcpt_address(addr, include_affixes), - host->name, host->address, string_printing(buffer)); + "%s", transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes), + string_printing(sx->buffer)); setflag(addr, af_pass_message); - deliver_msglog("%s %s\n", tod_stamp(tod_log), addr->message); + if (!sx->verify) + msglog_line(sx->host, addr->message); /* The response was 5xx */ - if (buffer[0] == '5') + if (sx->buffer[0] == '5') { addr->transport_return = FAIL; yield |= 2; @@ -676,25 +915,44 @@ while (count-- > 0) else { - int bincode = (buffer[1] - '0')*10 + buffer[2] - '0'; - addr->transport_return = DEFER; addr->basic_errno = ERRNO_RCPT4XX; - addr->more_errno |= bincode << 8; + addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; + + if (!sx->verify) + { +#ifndef DISABLE_EVENT + event_defer_errno = addr->more_errno; + msg_event_raise(US"msg:rcpt:host:defer", addr); +#endif - /* Log temporary errors if there are more hosts to be tried. */ + /* Log temporary errors if there are more hosts to be tried. + If not, log this last one in the == line. */ - if (host->next != NULL) log_write(0, LOG_MAIN, "%s", addr->message); + if (sx->host->next) + log_write(0, LOG_MAIN, "H=%s [%s]: %s", + sx->host->name, sx->host->address, addr->message); - /* Do not put this message on the list of those waiting for this host, - as otherwise it is likely to be tried too often. */ +#ifndef DISABLE_EVENT + else + msg_event_raise(US"msg:rcpt:defer", addr); +#endif + + /* Do not put this message on the list of those waiting for specific + hosts, as otherwise it is likely to be tried too often. */ - host->update_waiting = FALSE; + update_waiting = FALSE; - /* Add a retry item for the address so that it doesn't get tried - again too soon. */ + /* Add a retry item for the address so that it doesn't get tried again + too soon. If address_retry_include_sender is true, add the sender address + to the retry key. */ - retry_add_item(addr, addr->address_retry_key, 0); + retry_add_item(addr, + ob->address_retry_include_sender + ? string_sprintf("%s:<%s>", addr->address_retry_key, sender_address) + : addr->address_retry_key, + 0); + } } } } /* Loop for next RCPT response */ @@ -702,21 +960,33 @@ while (count-- > 0) /* Update where to start at for the next block of responses, unless we have already handled all the addresses. */ -if (addr != NULL) *sync_addr = addr->next; +if (addr) sx->sync_addr = addr->next; /* Handle a response to DATA. If we have not had any good recipients, either previously or in this block, the response is ignored. */ -if (pending_DATA != 0 && - !smtp_read_response(inblock, buffer, buffsize, '3', timeout)) +if (pending_DATA != 0) { - int code; - uschar *msg; - BOOL pass_message; - if (pending_DATA > 0 || (yield & 1) != 0) return -3; - (void)check_response(host, &errno, 0, buffer, &code, &msg, &pass_message); - DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining " - "is in use and there were no good recipients\n", msg); + DEBUG(D_transport) debug_printf("%s expect data\n", __FUNCTION__); + if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '3', ob->command_timeout)) + { + int code; + uschar *msg; + BOOL pass_message; + if (pending_DATA > 0 || (yield & 1) != 0) + { + if (errno == 0 && sx->buffer[0] == '4') + { + errno = ERRNO_DATA4XX; + sx->first_addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; + } + return -3; + } + (void)check_response(sx->host, &errno, 0, sx->buffer, &code, &msg, &pass_message); + DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining " + "is in use and there were no good recipients\n", msg); + } } /* All responses read and handled; MAIL (if present) received 2xx and DATA (if @@ -728,126 +998,193 @@ return yield; -/************************************************* -* Deliver address list to given host * -*************************************************/ - -/* If continue_hostname is not null, we get here only when continuing to -deliver down an existing channel. The channel was passed as the standard -input. - -Otherwise, we have to make a connection to the remote host, and do the -initial protocol exchange. - -When running as an MUA wrapper, if the sender or any recipient is rejected, -temporarily or permanently, we force failure for all recipients. - +/* Do the client side of smtp-level authentication */ +/* Arguments: - addrlist chain of potential addresses to deliver; only those whose - transport_return field is set to PENDING_DEFER are currently - being processed; others should be skipped - they have either - been delivered to an earlier host or IP address, or been - failed by one of them. - host host to deliver to - host_af AF_INET or AF_INET6 - port default TCP/IP port to use, in host byte order - interface interface to bind to, or NULL - tblock transport instance block - copy_host TRUE if host set in addr->host_used must be copied, because - it is specific to this call of the transport - message_defer set TRUE if yield is OK, but all addresses were deferred - because of a non-recipient, non-host failure, that is, a - 4xx response to MAIL FROM, DATA, or ".". This is a defer - that is specific to the message. - suppress_tls if TRUE, don't attempt a TLS connection - this is set for - a second attempt after TLS initialization fails - -Returns: OK - the connection was made and the delivery attempted; - the result for each address is in its data block. - DEFER - the connection could not be made, or something failed - while setting up the SMTP session, or there was a - non-message-specific error, such as a timeout. - ERROR - a filter command is specified for this transport, - and there was a problem setting it up; OR helo_data - or add_headers or authenticated_sender is specified - for this transport, and the string failed to expand + buffer EHLO response from server (gets overwritten) + addrlist chain of potential addresses to deliver + host host to deliver to + ob transport options + ibp, obp comms channel control blocks + +Returns: + OK Success, or failed (but not required): global "smtp_authenticated" set + DEFER Failed authentication (and was required) + ERROR Internal problem + + FAIL_SEND Failed communications - transmit + FAIL - response */ -static int -smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port, - uschar *interface, transport_instance *tblock, BOOL copy_host, - BOOL *message_defer, BOOL suppress_tls) +int +smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host, + smtp_transport_options_block *ob, BOOL is_esmtp, + smtp_inblock *ibp, smtp_outblock *obp) { -address_item *addr; -address_item *sync_addr; -address_item *first_addr = addrlist; -int yield = OK; -int address_count; -int save_errno; -int rc; -time_t start_delivery_time = time(NULL); -smtp_transport_options_block *ob = - (smtp_transport_options_block *)(tblock->options_block); -BOOL lmtp = strcmpic(ob->protocol, US"lmtp") == 0; -BOOL ok = FALSE; -BOOL send_rset = TRUE; -BOOL send_quit = TRUE; -BOOL setting_up = TRUE; -BOOL completed_address = FALSE; -BOOL esmtp = TRUE; -BOOL pending_MAIL; -BOOL pass_message = FALSE; -smtp_inblock inblock; -smtp_outblock outblock; -int max_rcpt = tblock->max_addresses; -uschar *igquotstr = US""; -uschar *local_authenticated_sender = authenticated_sender; -uschar *helo_data; -uschar *message = NULL; -uschar new_message_id[MESSAGE_ID_LENGTH + 1]; -uschar *p; -uschar buffer[4096]; -uschar inbuffer[4096]; -uschar outbuffer[1024]; +int require_auth; +uschar *fail_reason = US"server did not advertise AUTH support"; -suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */ +smtp_authenticated = FALSE; +client_authenticator = client_authenticated_id = client_authenticated_sender = NULL; +require_auth = verify_check_given_host(&ob->hosts_require_auth, host); -*message_defer = FALSE; -smtp_command = US"initial connection"; -if (max_rcpt == 0) max_rcpt = 999999; +if (is_esmtp && !regex_AUTH) regex_AUTH = + regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)", + FALSE, TRUE); -/* Set up the buffer for reading SMTP response packets. */ +if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1)) + { + uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]); + expand_nmax = -1; /* reset */ -inblock.buffer = inbuffer; -inblock.buffersize = sizeof(inbuffer); -inblock.ptr = inbuffer; -inblock.ptrend = inbuffer; + /* Must not do this check until after we have saved the result of the + regex match above. */ -/* Set up the buffer for holding SMTP commands while pipelining */ + if (require_auth == OK || + verify_check_given_host(&ob->hosts_try_auth, host) == OK) + { + auth_instance *au; + fail_reason = US"no common mechanisms were found"; -outblock.buffer = outbuffer; -outblock.buffersize = sizeof(outbuffer); -outblock.ptr = outbuffer; -outblock.cmd_count = 0; -outblock.authenticating = FALSE; + DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n"); + + /* Scan the configured authenticators looking for one which is configured + for use as a client, which is not suppressed by client_condition, and + whose name matches an authentication mechanism supported by the server. + If one is found, attempt to authenticate by calling its client function. + */ + + for (au = auths; !smtp_authenticated && au; au = au->next) + { + uschar *p = names; + if (!au->client || + (au->client_condition != NULL && + !expand_check_condition(au->client_condition, au->name, + US"client authenticator"))) + { + DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n", + au->name, + (au->client)? "client_condition is false" : + "not configured as a client"); + continue; + } + + /* Loop to scan supported server mechanisms */ + + while (*p) + { + int rc; + int len = Ustrlen(au->public_name); + while (isspace(*p)) p++; + + if (strncmpic(au->public_name, p, len) != 0 || + (p[len] != 0 && !isspace(p[len]))) + { + while (*p != 0 && !isspace(*p)) p++; + continue; + } + + /* Found data for a listed mechanism. Call its client entry. Set + a flag in the outblock so that data is overwritten after sending so + that reflections don't show it. */ + + fail_reason = US"authentication attempt(s) failed"; + obp->authenticating = TRUE; + rc = (au->info->clientcode)(au, ibp, obp, + ob->command_timeout, buffer, bufsize); + obp->authenticating = FALSE; + DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n", + au->name, rc); + + /* A temporary authentication failure must hold up delivery to + this host. After a permanent authentication failure, we carry on + to try other authentication methods. If all fail hard, try to + deliver the message unauthenticated unless require_auth was set. */ + + switch(rc) + { + case OK: + smtp_authenticated = TRUE; /* stops the outer loop */ + client_authenticator = au->name; + if (au->set_client_id != NULL) + client_authenticated_id = expand_string(au->set_client_id); + break; + + /* Failure after writing a command */ + + case FAIL_SEND: + return FAIL_SEND; + + /* Failure after reading a response */ + + case FAIL: + if (errno != 0 || buffer[0] != '5') return FAIL; + log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s", + au->name, host->name, host->address, buffer); + break; + + /* Failure by some other means. In effect, the authenticator + decided it wasn't prepared to handle this case. Typically this + is the result of "fail" in an expansion string. Do we need to + log anything here? Feb 2006: a message is now put in the buffer + if logging is required. */ + + case CANCELLED: + if (*buffer != 0) + log_write(0, LOG_MAIN, "%s authenticator cancelled " + "authentication H=%s [%s] %s", au->name, host->name, + host->address, buffer); + break; + + /* Internal problem, message in buffer. */ + + case ERROR: + set_errno_nohost(addrlist, ERRNO_AUTHPROB, string_copy(buffer), + DEFER, FALSE); + return ERROR; + } + + break; /* If not authenticated, try next authenticator */ + } /* Loop for scanning supported server mechanisms */ + } /* Loop for further authenticators */ + } + } -/* Expand the greeting message */ +/* If we haven't authenticated, but are required to, give up. */ -helo_data = expand_string(ob->helo_data); -if (helo_data == NULL) +if (require_auth == OK && !smtp_authenticated) { - uschar *message = string_sprintf("failed to expand helo_data: %s", - expand_string_message); - set_errno(addrlist, 0, message, DEFER, FALSE); - return ERROR; + set_errno_nohost(addrlist, ERRNO_AUTHFAIL, + string_sprintf("authentication required but %s", fail_reason), DEFER, + FALSE); + return DEFER; } -/* If an authenticated_sender override has been specified for this transport -instance, expand it. If the expansion is forced to fail, and there was already -an authenticated_sender for this message, the original value will be used. -Other expansion failures are serious. An empty result is ignored, but there is -otherwise no check - this feature is expected to be used with LMTP and other -cases where non-standard addresses (e.g. without domains) might be required. */ +return OK; +} + + +/* Construct AUTH appendix string for MAIL TO */ +/* +Arguments + buffer to build string + addrlist chain of potential addresses to deliver + ob transport options + +Globals smtp_authenticated + client_authenticated_sender +Return True on error, otherwise buffer has (possibly empty) terminated string +*/ + +BOOL +smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist, + smtp_transport_options_block *ob) +{ +uschar *local_authenticated_sender = authenticated_sender; + +#ifdef notdef + debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N"); +#endif if (ob->authenticated_sender != NULL) { @@ -858,58 +1195,599 @@ if (ob->authenticated_sender != NULL) { uschar *message = string_sprintf("failed to expand " "authenticated_sender: %s", expand_string_message); - set_errno(addrlist, 0, message, DEFER, FALSE); - return ERROR; + set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE); + return TRUE; } } else if (new[0] != 0) local_authenticated_sender = new; } -/* Make a connection to the host if this isn't a continued delivery, and handle -the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled -specially so they can be identified for retries. */ +/* Add the authenticated sender address if present */ -if (continue_hostname == NULL) +if ((smtp_authenticated || ob->authenticated_sender_force) && + local_authenticated_sender != NULL) { - inblock.sock = outblock.sock = - smtp_connect(host, host_af, port, interface, ob->connect_timeout, - ob->keepalive); - if (inblock.sock < 0) - { - set_errno(addrlist, (errno == ETIMEDOUT)? ERRNO_CONNECTTIMEOUT : errno, - NULL, DEFER, FALSE); - return DEFER; - } + string_format(buffer, bufsize, " AUTH=%s", + auth_xtextencode(local_authenticated_sender, + Ustrlen(local_authenticated_sender))); + client_authenticated_sender = string_copy(local_authenticated_sender); + } +else + *buffer= 0; - /* The first thing is to wait for an initial OK response. The dreaded "goto" - is nevertheless a reasonably clean way of programming this kind of logic, - where you want to escape on any error. */ +return FALSE; +} - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout)) goto RESPONSE_FAILED; -/** Debugging without sending a message -addrlist->transport_return = DEFER; -goto SEND_QUIT; -**/ - /* Errors that occur after this point follow an SMTP command, which is - left in big_buffer by smtp_write_command() for use in error messages. */ +#ifdef SUPPORT_DANE +/* Lookup TLSA record for host/port. +Return: OK success with dnssec; DANE mode + DEFER Do not use this host now, may retry later + FAIL_FORCED No TLSA record; DANE not usable + FAIL Do not use this connection +*/ - smtp_command = big_buffer; +int +tlsa_lookup(const host_item * host, dns_answer * dnsa, BOOL dane_required) +{ +/* move this out to host.c given the similarity to dns_lookup() ? */ +uschar buffer[300]; +const uschar * fullname = buffer; +int rc; +BOOL sec; - /* Tell the remote who we are... +/* TLSA lookup string */ +(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name); - February 1998: A convention has evolved that ESMTP-speaking MTAs include the - string "ESMTP" in their greeting lines, so make Exim send EHLO if the - greeting is of this form. The assumption was that the far end supports it - properly... but experience shows that there are some that give 5xx responses, - even though the banner includes "ESMTP" (there's a bloody-minded one that - says "ESMTP not spoken here"). Cope with that case. +rc = dns_lookup(dnsa, buffer, T_TLSA, &fullname); +sec = dns_is_secure(dnsa); +DEBUG(D_transport) + debug_printf("TLSA lookup ret %d %sDNSSEC\n", rc, sec ? "" : "not "); - September 2000: Time has passed, and it seems reasonable now to always send - EHLO at the start. It is also convenient to make the change while installing - the TLS stuff. +switch (rc) + { + case DNS_AGAIN: + return DEFER; /* just defer this TLS'd conn */ + + case DNS_SUCCEED: + if (sec) return OK; + log_write(0, LOG_MAIN, + "DANE error: TLSA lookup for %s not DNSSEC", host->name); + /*FALLTRHOUGH*/ + + case DNS_NODATA: /* no TLSA RR for this lookup */ + case DNS_NOMATCH: /* no records at all for this lookup */ + return dane_required ? FAIL : FAIL_FORCED; + + default: + case DNS_FAIL: + return dane_required ? FAIL : DEFER; + } +} +#endif + + + +typedef struct smtp_compare_s +{ + uschar *current_sender_address; + struct transport_instance *tblock; +} smtp_compare_t; + + +/* Create a unique string that identifies this message, it is based on +sender_address, helo_data and tls_certificate if enabled. +*/ + +static uschar * +smtp_local_identity(uschar * sender, struct transport_instance * tblock) +{ +address_item * addr1; +uschar * if1 = US""; +uschar * helo1 = US""; +#ifdef SUPPORT_TLS +uschar * tlsc1 = US""; +#endif +uschar * save_sender_address = sender_address; +uschar * local_identity = NULL; +smtp_transport_options_block * ob = + (smtp_transport_options_block *)tblock->options_block; + +sender_address = sender; + +addr1 = deliver_make_addr (sender, TRUE); +deliver_set_expansions(addr1); + +if (ob->interface) + if1 = expand_string(ob->interface); + +if (ob->helo_data) + helo1 = expand_string(ob->helo_data); + +#ifdef SUPPORT_TLS +if (ob->tls_certificate) + tlsc1 = expand_string(ob->tls_certificate); +local_identity = string_sprintf ("%s^%s^%s", if1, helo1, tlsc1); +#else +local_identity = string_sprintf ("%s^%s", if1, helo1); +#endif + +deliver_set_expansions(NULL); +sender_address = save_sender_address; + +return local_identity; +} + + + +/* This routine is a callback that is called from transport_check_waiting. +This function will evaluate the incoming message versus the previous +message. If the incoming message is using a different local identity then +we will veto this new message. */ + +static BOOL +smtp_are_same_identities(uschar * message_id, smtp_compare_t * s_compare) +{ +uschar * message_local_identity, + * current_local_identity, + * new_sender_address; + +current_local_identity = + smtp_local_identity(s_compare->current_sender_address, s_compare->tblock); + +if (!(new_sender_address = deliver_get_sender_address(message_id))) + return 0; + +message_local_identity = + smtp_local_identity(new_sender_address, s_compare->tblock); + +return Ustrcmp(current_local_identity, message_local_identity) == 0; +} + + + +static unsigned +ehlo_response(uschar * buf, unsigned checks) +{ +size_t bsize = Ustrlen(buf); + +#ifdef SUPPORT_TLS +if ( checks & OPTION_TLS + && pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_TLS; + +# ifdef EXPERIMENTAL_REQUIRETLS +if ( checks & OPTION_REQUIRETLS + && pcre_exec(regex_REQUIRETLS, NULL, CS buf,bsize, 0, PCRE_EOPT, NULL,0) < 0) + checks &= ~OPTION_REQUIRETLS; +# endif +#endif + +if ( checks & OPTION_IGNQ + && pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0, + PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_IGNQ; + +if ( checks & OPTION_CHUNKING + && pcre_exec(regex_CHUNKING, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_CHUNKING; + +#ifndef DISABLE_PRDR +if ( checks & OPTION_PRDR + && pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_PRDR; +#endif + +#ifdef SUPPORT_I18N +if ( checks & OPTION_UTF8 + && pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_UTF8; +#endif + +if ( checks & OPTION_DSN + && pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_DSN; + +if ( checks & OPTION_PIPE + && pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0, + PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_PIPE; + +if ( checks & OPTION_SIZE + && pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0) + checks &= ~OPTION_SIZE; + +return checks; +} + + + +/* Callback for emitting a BDAT data chunk header. + +If given a nonzero size, first flush any buffered SMTP commands +then emit the command. + +Reap previous SMTP command responses if requested, and always reap +the response from a previous BDAT command. + +Args: + tctx transport context + chunk_size value for SMTP BDAT command + flags + tc_chunk_last add LAST option to SMTP BDAT command + tc_reap_prev reap response to previous SMTP commands + +Returns: OK or ERROR +*/ + +static int +smtp_chunk_cmd_callback(transport_ctx * tctx, unsigned chunk_size, + unsigned flags) +{ +smtp_transport_options_block * ob = + (smtp_transport_options_block *)(tctx->tblock->options_block); +smtp_context * sx = tctx->smtp_context; +int cmd_count = 0; +int prev_cmd_count; + +/* Write SMTP chunk header command. If not reaping responses, note that +there may be more writes (like, the chunk data) done soon. */ + +if (chunk_size > 0) + { + if((cmd_count = smtp_write_command(&sx->outblock, + flags & tc_reap_prev ? SCMD_FLUSH : SCMD_MORE, + "BDAT %u%s\r\n", chunk_size, flags & tc_chunk_last ? " LAST" : "") + ) < 0) return ERROR; + if (flags & tc_chunk_last) + data_command = string_copy(big_buffer); /* Save for later error message */ + } + +prev_cmd_count = cmd_count += sx->cmd_count; + +/* Reap responses for any previous, but not one we just emitted */ + +if (chunk_size > 0) + prev_cmd_count--; +if (sx->pending_BDAT) + prev_cmd_count--; + +if (flags & tc_reap_prev && prev_cmd_count > 0) + { + DEBUG(D_transport) debug_printf("look for %d responses" + " for previous pipelined cmds\n", prev_cmd_count); + + switch(sync_responses(sx, prev_cmd_count, 0)) + { + case 1: /* 2xx (only) => OK */ + case 3: sx->good_RCPT = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */ + case 0: break; /* No 2xx or 5xx, but no probs */ + + case -1: /* Timeout on RCPT */ + default: return ERROR; /* I/O error, or any MAIL/DATA error */ + } + cmd_count = 1; + if (!sx->pending_BDAT) + pipelining_active = FALSE; + } + +/* Reap response for an outstanding BDAT */ + +if (sx->pending_BDAT) + { + DEBUG(D_transport) debug_printf("look for one response for BDAT\n"); + + if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2', + ob->command_timeout)) + { + if (errno == 0 && sx->buffer[0] == '4') + { + errno = ERRNO_DATA4XX; /*XXX does this actually get used? */ + sx->addrlist->more_errno |= + ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; + } + return ERROR; + } + cmd_count--; + sx->pending_BDAT = FALSE; + pipelining_active = FALSE; + } +else if (chunk_size > 0) + sx->pending_BDAT = TRUE; + + +sx->cmd_count = cmd_count; +return OK; +} + + + +/************************************************* +* Make connection for given message * +*************************************************/ + +/* +Arguments: + ctx connection context + suppress_tls if TRUE, don't attempt a TLS connection - this is set for + a second attempt after TLS initialization fails + +Returns: OK - the connection was made and the delivery attempted; + fd is set in the conn context, tls_out set up. + DEFER - the connection could not be made, or something failed + while setting up the SMTP session, or there was a + non-message-specific error, such as a timeout. + ERROR - helo_data or add_headers or authenticated_sender is + specified for this transport, and the string failed + to expand +*/ +int +smtp_setup_conn(smtp_context * sx, BOOL suppress_tls) +{ +#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE) +dns_answer tlsa_dnsa; +#endif +BOOL pass_message = FALSE; +uschar * message = NULL; +int yield = OK; +int rc; + +sx->ob = (smtp_transport_options_block *) sx->tblock->options_block; + +sx->lmtp = strcmpic(sx->ob->protocol, US"lmtp") == 0; +sx->smtps = strcmpic(sx->ob->protocol, US"smtps") == 0; +sx->ok = FALSE; +sx->send_rset = TRUE; +sx->send_quit = TRUE; +sx->setting_up = TRUE; +sx->esmtp = TRUE; +sx->esmtp_sent = FALSE; +#ifdef SUPPORT_I18N +sx->utf8_needed = FALSE; +#endif +sx->dsn_all_lasthop = TRUE; +#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE) +sx->dane = FALSE; +sx->dane_required = + verify_check_given_host(&sx->ob->hosts_require_dane, sx->host) == OK; +#endif + +if ((sx->max_rcpt = sx->tblock->max_addresses) == 0) sx->max_rcpt = 999999; +sx->peer_offered = 0; +sx->avoid_option = 0; +sx->igquotstr = US""; +if (!sx->helo_data) sx->helo_data = sx->ob->helo_data; +#ifdef EXPERIMENTAL_DSN_INFO +sx->smtp_greeting = NULL; +sx->helo_response = NULL; +#endif + +smtp_command = US"initial connection"; +sx->buffer[0] = '\0'; + +/* Set up the buffer for reading SMTP response packets. */ + +sx->inblock.buffer = sx->inbuffer; +sx->inblock.buffersize = sizeof(sx->inbuffer); +sx->inblock.ptr = sx->inbuffer; +sx->inblock.ptrend = sx->inbuffer; + +/* Set up the buffer for holding SMTP commands while pipelining */ + +sx->outblock.buffer = sx->outbuffer; +sx->outblock.buffersize = sizeof(sx->outbuffer); +sx->outblock.ptr = sx->outbuffer; +sx->outblock.cmd_count = 0; +sx->outblock.authenticating = FALSE; + +/* Reset the parameters of a TLS session. */ + +tls_out.bits = 0; +tls_out.cipher = NULL; /* the one we may use for this transport */ +tls_out.ourcert = NULL; +tls_out.peercert = NULL; +tls_out.peerdn = NULL; +#if defined(SUPPORT_TLS) && !defined(USE_GNUTLS) +tls_out.sni = NULL; +#endif +tls_out.ocsp = OCSP_NOT_REQ; + +/* Flip the legacy TLS-related variables over to the outbound set in case +they're used in the context of the transport. Don't bother resetting +afterward (when being used by a transport) as we're in a subprocess. +For verify, unflipped once the callout is dealt with */ + +tls_modify_variables(&tls_out); + +#ifndef SUPPORT_TLS +if (sx->smtps) + { + set_errno_nohost(sx->addrlist, ERRNO_TLSFAILURE, US"TLS support not available", + DEFER, FALSE); + return ERROR; + } +#endif + +/* Make a connection to the host if this isn't a continued delivery, and handle +the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled +specially so they can be identified for retries. */ + +if (!continue_hostname) + { + if (sx->verify) + HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->interface, sx->port); + + /* Get the actual port the connection will use, into sx->host */ + + smtp_port_for_connect(sx->host, sx->port); + +#if defined(SUPPORT_TLS) && defined(SUPPORT_DANE) + /* Do TLSA lookup for DANE */ + { + tls_out.dane_verified = FALSE; + tls_out.tlsa_usage = 0; + + if (sx->host->dnssec == DS_YES) + { + if( sx->dane_required + || verify_check_given_host(&sx->ob->hosts_try_dane, sx->host) == OK + ) + switch (rc = tlsa_lookup(sx->host, &tlsa_dnsa, sx->dane_required)) + { + case OK: sx->dane = TRUE; + sx->ob->tls_tempfail_tryclear = FALSE; + break; + case FAIL_FORCED: break; + default: set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER, + string_sprintf("DANE error: tlsa lookup %s", + rc == DEFER ? "DEFER" : "FAIL"), + rc, FALSE); +# ifndef DISABLE_EVENT + (void) event_raise(sx->tblock->event_action, + US"dane:fail", sx->dane_required + ? US"dane-required" : US"dnssec-invalid"); +# endif + return rc; + } + } + else if (sx->dane_required) + { + set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER, + string_sprintf("DANE error: %s lookup not DNSSEC", sx->host->name), + FAIL, FALSE); +# ifndef DISABLE_EVENT + (void) event_raise(sx->tblock->event_action, + US"dane:fail", US"dane-required"); +# endif + return FAIL; + } + } +#endif /*DANE*/ + + /* Make the TCP connection */ + + sx->cctx.sock = + smtp_connect(sx->host, sx->host_af, sx->interface, + sx->ob->connect_timeout, sx->tblock); + sx->cctx.tls_ctx = NULL; + sx->inblock.cctx = sx->outblock.cctx = &sx->cctx; + + if (sx->cctx.sock < 0) + { + uschar * msg = NULL; + if (sx->verify) + { + msg = US strerror(errno); + HDEBUG(D_verify) debug_printf("connect: %s\n", msg); + } + set_errno_nohost(sx->addrlist, + errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno, + sx->verify ? string_sprintf("could not connect: %s", msg) + : NULL, + DEFER, FALSE); + sx->send_quit = FALSE; + return DEFER; + } + + /* Expand the greeting message while waiting for the initial response. (Makes + sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is + delayed till here so that $sending_interface and $sending_port are set. */ + + if (sx->helo_data) + if (!(sx->helo_data = expand_string(sx->helo_data))) + if (sx->verify) + log_write(0, LOG_MAIN|LOG_PANIC, + "<%s>: failed to expand transport's helo_data value for callout: %s", + sx->addrlist->address, expand_string_message); + +#ifdef SUPPORT_I18N + if (sx->helo_data) + { + expand_string_message = NULL; + if ((sx->helo_data = string_domain_utf8_to_alabel(sx->helo_data, + &expand_string_message)), + expand_string_message) + if (sx->verify) + log_write(0, LOG_MAIN|LOG_PANIC, + "<%s>: failed to expand transport's helo_data value for callout: %s", + sx->addrlist->address, expand_string_message); + else + sx->helo_data = NULL; + } +#endif + + /* The first thing is to wait for an initial OK response. The dreaded "goto" + is nevertheless a reasonably clean way of programming this kind of logic, + where you want to escape on any error. */ + + if (!sx->smtps) + { + BOOL good_response; + +#ifdef TCP_QUICKACK + (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, TCP_QUICKACK, US &off, sizeof(off)); +#endif + good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '2', sx->ob->command_timeout); +#ifdef EXPERIMENTAL_DSN_INFO + sx->smtp_greeting = string_copy(sx->buffer); +#endif + if (!good_response) goto RESPONSE_FAILED; + +#ifndef DISABLE_EVENT + { + uschar * s; + lookup_dnssec_authenticated = sx->host->dnssec==DS_YES ? US"yes" + : sx->host->dnssec==DS_NO ? US"no" : NULL; + s = event_raise(sx->tblock->event_action, US"smtp:connect", sx->buffer); + if (s) + { + set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, + string_sprintf("deferred by smtp:connect event expansion: %s", s), + DEFER, FALSE); + yield = DEFER; + goto SEND_QUIT; + } + } +#endif + + /* Now check if the helo_data expansion went well, and sign off cleanly if + it didn't. */ + + if (!sx->helo_data) + { + message = string_sprintf("failed to expand helo_data: %s", + expand_string_message); + set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE); + yield = DEFER; + goto SEND_QUIT; + } + } + +/** Debugging without sending a message +sx->addrlist->transport_return = DEFER; +goto SEND_QUIT; +**/ + + /* Errors that occur after this point follow an SMTP command, which is + left in big_buffer by smtp_write_command() for use in error messages. */ + + smtp_command = big_buffer; + + /* Tell the remote who we are... + + February 1998: A convention has evolved that ESMTP-speaking MTAs include the + string "ESMTP" in their greeting lines, so make Exim send EHLO if the + greeting is of this form. The assumption was that the far end supports it + properly... but experience shows that there are some that give 5xx responses, + even though the banner includes "ESMTP" (there's a bloody-minded one that + says "ESMTP not spoken here"). Cope with that case. + + September 2000: Time has passed, and it seems reasonable now to always send + EHLO at the start. It is also convenient to make the change while installing + the TLS stuff. July 2003: Joachim Wieland met a broken server that advertises "PIPELINING" but times out after sending MAIL FROM, RCPT TO and DATA all together. There @@ -918,491 +1796,1229 @@ goto SEND_QUIT; PIPELINING problem as well. Maybe it can also be useful to cure other problems with broken servers. - Exim originally sent "Helo" at this point and ran for nearly a year that way. - Then somebody tried it with a Microsoft mailer... It seems that all other - mailers use upper case for some reason (the RFC is quite clear about case - independence) so, for peace of mind, I gave in. */ + Exim originally sent "Helo" at this point and ran for nearly a year that way. + Then somebody tried it with a Microsoft mailer... It seems that all other + mailers use upper case for some reason (the RFC is quite clear about case + independence) so, for peace of mind, I gave in. */ + + sx->esmtp = verify_check_given_host(&sx->ob->hosts_avoid_esmtp, sx->host) != OK; + + /* Alas; be careful, since this goto is not an error-out, so conceivably + we might set data between here and the target which we assume to exist + and be usable. I can see this coming back to bite us. */ +#ifdef SUPPORT_TLS + if (sx->smtps) + { + smtp_peer_options |= OPTION_TLS; + suppress_tls = FALSE; + sx->ob->tls_tempfail_tryclear = FALSE; + smtp_command = US"SSL-on-connect"; + goto TLS_NEGOTIATE; + } +#endif + + if (sx->esmtp) + { + if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "%s %s\r\n", + sx->lmtp ? "LHLO" : "EHLO", sx->helo_data) < 0) + goto SEND_FAILED; + sx->esmtp_sent = TRUE; + if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2', + sx->ob->command_timeout)) + { + if (errno != 0 || sx->buffer[0] == 0 || sx->lmtp) + { +#ifdef EXPERIMENTAL_DSN_INFO + sx->helo_response = string_copy(sx->buffer); +#endif + goto RESPONSE_FAILED; + } + sx->esmtp = FALSE; + } +#ifdef EXPERIMENTAL_DSN_INFO + sx->helo_response = string_copy(sx->buffer); +#endif + } + else + DEBUG(D_transport) + debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n"); + + if (!sx->esmtp) + { + BOOL good_response; + int n = sizeof(sx->buffer); + uschar * rsp = sx->buffer; + + if (sx->esmtp_sent && (n = Ustrlen(sx->buffer)) < sizeof(sx->buffer)/2) + { rsp = sx->buffer + n + 1; n = sizeof(sx->buffer) - n; } + + if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "HELO %s\r\n", sx->helo_data) < 0) + goto SEND_FAILED; + good_response = smtp_read_response(&sx->inblock, rsp, n, + '2', sx->ob->command_timeout); +#ifdef EXPERIMENTAL_DSN_INFO + sx->helo_response = string_copy(rsp); +#endif + if (!good_response) + { + /* Handle special logging for a closed connection after HELO + when had previously sent EHLO */ + + if (rsp != sx->buffer && rsp[0] == 0 && (errno == 0 || errno == ECONNRESET)) + { + errno = ERRNO_SMTPCLOSED; + goto EHLOHELO_FAILED; + } + memmove(sx->buffer, rsp, Ustrlen(rsp)); + goto RESPONSE_FAILED; + } + } + + sx->avoid_option = sx->peer_offered = smtp_peer_options = 0; + + if (sx->esmtp || sx->lmtp) + { + sx->peer_offered = ehlo_response(sx->buffer, + OPTION_TLS /* others checked later */ + ); + + /* Set tls_offered if the response to EHLO specifies support for STARTTLS. */ + +#ifdef SUPPORT_TLS + smtp_peer_options |= sx->peer_offered & OPTION_TLS; +#endif + } + } + +/* For continuing deliveries down the same channel, having re-exec'd the socket +is the standard input; for a socket held open from verify it is recorded +in the cutthrough context block. Either way we don't need to redo EHLO here +(but may need to do so for TLS - see below). +Set up the pointer to where subsequent commands will be left, for +error messages. Note that smtp_peer_options will have been +set from the command line if they were set in the process that passed the +connection on. */ + +/*XXX continue case needs to propagate DSN_INFO, prob. in deliver.c +as the continue goes via transport_pass_socket() and doublefork and exec. +It does not wait. Unclear how we keep separate host's responses +separate - we could match up by host ip+port as a bodge. */ + +else + { + if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only) + { + sx->cctx = cutthrough.cctx; + sx->host->port = sx->port = cutthrough.host.port; + } + else + { + sx->cctx.sock = 0; /* stdin */ + sx->cctx.tls_ctx = NULL; + smtp_port_for_connect(sx->host, sx->port); /* Record the port that was used */ + } + sx->inblock.cctx = sx->outblock.cctx = &sx->cctx; + smtp_command = big_buffer; + sx->helo_data = NULL; /* ensure we re-expand ob->helo_data */ + + /* For a continued connection with TLS being proxied for us, or a + held-open verify connection with TLS, nothing more to do. */ + + if ( continue_proxy_cipher + || (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only + && cutthrough.is_tls) + ) + { + sx->peer_offered = smtp_peer_options; + sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE); + HDEBUG(D_transport) debug_printf("continued connection, %s TLS\n", + continue_proxy_cipher ? "proxied" : "verify conn with"); + return OK; + } + HDEBUG(D_transport) debug_printf("continued connection, no TLS\n"); + } + +/* If TLS is available on this connection, whether continued or not, attempt to +start up a TLS session, unless the host is in hosts_avoid_tls. If successful, +send another EHLO - the server may give a different answer in secure mode. We +use a separate buffer for reading the response to STARTTLS so that if it is +negative, the original EHLO data is available for subsequent analysis, should +the client not be required to use TLS. If the response is bad, copy the buffer +for error analysis. */ + +#ifdef SUPPORT_TLS +if ( smtp_peer_options & OPTION_TLS + && !suppress_tls + && verify_check_given_host(&sx->ob->hosts_avoid_tls, sx->host) != OK + && ( !sx->verify + || verify_check_given_host(&sx->ob->hosts_verify_avoid_tls, sx->host) != OK + ) ) + { + uschar buffer2[4096]; + if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "STARTTLS\r\n") < 0) + goto SEND_FAILED; + + /* If there is an I/O error, transmission of this message is deferred. If + there is a temporary rejection of STARRTLS and tls_tempfail_tryclear is + false, we also defer. However, if there is a temporary rejection of STARTTLS + and tls_tempfail_tryclear is true, or if there is an outright rejection of + STARTTLS, we carry on. This means we will try to send the message in clear, + unless the host is in hosts_require_tls (tested below). */ + + if (!smtp_read_response(&sx->inblock, buffer2, sizeof(buffer2), '2', + sx->ob->command_timeout)) + { + if ( errno != 0 + || buffer2[0] == 0 + || (buffer2[0] == '4' && !sx->ob->tls_tempfail_tryclear) + ) + { + Ustrncpy(sx->buffer, buffer2, sizeof(sx->buffer)); + sx->buffer[sizeof(sx->buffer)-1] = '\0'; + goto RESPONSE_FAILED; + } + } + + /* STARTTLS accepted: try to negotiate a TLS session. */ + + else + TLS_NEGOTIATE: + { + address_item * addr; + uschar * errstr; + sx->cctx.tls_ctx = tls_client_start(sx->cctx.sock, sx->host, + sx->addrlist, sx->tblock, +# ifdef SUPPORT_DANE + sx->dane ? &tlsa_dnsa : NULL, +# endif + &tls_out, &errstr); + + if (!sx->cctx.tls_ctx) + { + /* TLS negotiation failed; give an error. From outside, this function may + be called again to try in clear on a new connection, if the options permit + it for this host. */ + +# ifdef SUPPORT_DANE + if (sx->dane) + { + log_write(0, LOG_MAIN, + "DANE attempt failed; TLS connection to %s [%s]: %s", + sx->host->name, sx->host->address, errstr); +# ifndef DISABLE_EVENT + (void) event_raise(sx->tblock->event_action, + US"dane:fail", US"validation-failure"); /* could do with better detail */ +# endif + } +# endif + + errno = ERRNO_TLSFAILURE; + message = string_sprintf("TLS session: %s", errstr); + sx->send_quit = FALSE; + goto TLS_FAILED; + } + + /* TLS session is set up */ + + smtp_peer_options_wrap = smtp_peer_options; + for (addr = sx->addrlist; addr; addr = addr->next) + if (addr->transport_return == PENDING_DEFER) + { + addr->cipher = tls_out.cipher; + addr->ourcert = tls_out.ourcert; + addr->peercert = tls_out.peercert; + addr->peerdn = tls_out.peerdn; + addr->ocsp = tls_out.ocsp; + } + } + } + +/* if smtps, we'll have smtp_command set to something else; always safe to +reset it here. */ +smtp_command = big_buffer; + +/* If we started TLS, redo the EHLO/LHLO exchange over the secure channel. If +helo_data is null, we are dealing with a connection that was passed from +another process, and so we won't have expanded helo_data above. We have to +expand it here. $sending_ip_address and $sending_port are set up right at the +start of the Exim process (in exim.c). */ + +if (tls_out.active.sock >= 0) + { + char *greeting_cmd; + BOOL good_response; + + if (!sx->helo_data && !(sx->helo_data = expand_string(sx->ob->helo_data))) + { + uschar *message = string_sprintf("failed to expand helo_data: %s", + expand_string_message); + set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE); + yield = DEFER; + goto SEND_QUIT; + } + + /* For SMTPS we need to wait for the initial OK response. */ + if (sx->smtps) + { + good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '2', sx->ob->command_timeout); +#ifdef EXPERIMENTAL_DSN_INFO + sx->smtp_greeting = string_copy(sx->buffer); +#endif + if (!good_response) goto RESPONSE_FAILED; + } + + if (sx->esmtp) + greeting_cmd = "EHLO"; + else + { + greeting_cmd = "HELO"; + DEBUG(D_transport) + debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n"); + } + + if (smtp_write_command(&sx->outblock, SCMD_FLUSH, "%s %s\r\n", + sx->lmtp ? "LHLO" : greeting_cmd, sx->helo_data) < 0) + goto SEND_FAILED; + good_response = smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), + '2', sx->ob->command_timeout); +#ifdef EXPERIMENTAL_DSN_INFO + sx->helo_response = string_copy(sx->buffer); +#endif + if (!good_response) goto RESPONSE_FAILED; + smtp_peer_options = 0; + } + +/* If the host is required to use a secure channel, ensure that we +have one. */ + +else if ( sx->smtps +# ifdef SUPPORT_DANE + || sx->dane +# endif +# ifdef EXPERIMENTAL_REQUIRETLS + || tls_requiretls & REQUIRETLS_MSG +# endif + || verify_check_given_host(&sx->ob->hosts_require_tls, sx->host) == OK + ) + { + errno = +# ifdef EXPERIMENTAL_REQUIRETLS + tls_requiretls & REQUIRETLS_MSG ? ERRNO_REQUIRETLS : +# endif + ERRNO_TLSREQUIRED; + message = string_sprintf("a TLS session is required, but %s", + smtp_peer_options & OPTION_TLS + ? "an attempt to start TLS failed" : "the server did not offer TLS support"); +# if defined(SUPPORT_DANE) && !defined(DISABLE_EVENT) + if (sx->dane) + (void) event_raise(sx->tblock->event_action, US"dane:fail", + smtp_peer_options & OPTION_TLS + ? US"validation-failure" /* could do with better detail */ + : US"starttls-not-supported"); +# endif + goto TLS_FAILED; + } +#endif /*SUPPORT_TLS*/ + +/* If TLS is active, we have just started it up and re-done the EHLO command, +so its response needs to be analyzed. If TLS is not active and this is a +continued session down a previously-used socket, we haven't just done EHLO, so +we skip this. */ + +if (continue_hostname == NULL +#ifdef SUPPORT_TLS + || tls_out.active.sock >= 0 +#endif + ) + { + if (sx->esmtp || sx->lmtp) + { + sx->peer_offered = ehlo_response(sx->buffer, + 0 /* no TLS */ + | (sx->lmtp && sx->ob->lmtp_ignore_quota ? OPTION_IGNQ : 0) + | OPTION_CHUNKING + | OPTION_PRDR +#ifdef SUPPORT_I18N + | (sx->addrlist->prop.utf8_msg ? OPTION_UTF8 : 0) + /*XXX if we hand peercaps on to continued-conn processes, + must not depend on this addr */ +#endif + | OPTION_DSN + | OPTION_PIPE + | (sx->ob->size_addition >= 0 ? OPTION_SIZE : 0) +#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS) + | (tls_requiretls & REQUIRETLS_MSG ? OPTION_REQUIRETLS : 0) +#endif + ); + + /* Set for IGNOREQUOTA if the response to LHLO specifies support and the + lmtp_ignore_quota option was set. */ + + sx->igquotstr = sx->peer_offered & OPTION_IGNQ ? US" IGNOREQUOTA" : US""; + + /* If the response to EHLO specified support for the SIZE parameter, note + this, provided size_addition is non-negative. */ + + smtp_peer_options |= sx->peer_offered & OPTION_SIZE; + + /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched + the current host, esmtp will be false, so PIPELINING can never be used. If + the current host matches hosts_avoid_pipelining, don't do it. */ + + if ( sx->peer_offered & OPTION_PIPE + && verify_check_given_host(&sx->ob->hosts_avoid_pipelining, sx->host) != OK) + smtp_peer_options |= OPTION_PIPE; + + DEBUG(D_transport) debug_printf("%susing PIPELINING\n", + smtp_peer_options & OPTION_PIPE ? "" : "not "); + + if ( sx->peer_offered & OPTION_CHUNKING + && verify_check_given_host(&sx->ob->hosts_try_chunking, sx->host) != OK) + sx->peer_offered &= ~OPTION_CHUNKING; + + if (sx->peer_offered & OPTION_CHUNKING) + {DEBUG(D_transport) debug_printf("CHUNKING usable\n");} + +#ifndef DISABLE_PRDR + if ( sx->peer_offered & OPTION_PRDR + && verify_check_given_host(&sx->ob->hosts_try_prdr, sx->host) != OK) + sx->peer_offered &= ~OPTION_PRDR; + + if (sx->peer_offered & OPTION_PRDR) + {DEBUG(D_transport) debug_printf("PRDR usable\n");} +#endif + + /* Note if the server supports DSN */ + smtp_peer_options |= sx->peer_offered & OPTION_DSN; + DEBUG(D_transport) debug_printf("%susing DSN\n", + sx->peer_offered & OPTION_DSN ? "" : "not "); + +#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS) + if (sx->peer_offered & OPTION_REQUIRETLS) + { + smtp_peer_options |= OPTION_REQUIRETLS; + DEBUG(D_transport) debug_printf( + tls_requiretls & REQUIRETLS_MSG + ? "using REQUIRETLS\n" : "REQUIRETLS offered\n"); + } +#endif + + /* Note if the response to EHLO specifies support for the AUTH extension. + If it has, check that this host is one we want to authenticate to, and do + the business. The host name and address must be available when the + authenticator's client driver is running. */ + + switch (yield = smtp_auth(sx->buffer, sizeof(sx->buffer), sx->addrlist, sx->host, + sx->ob, sx->esmtp, &sx->inblock, &sx->outblock)) + { + default: goto SEND_QUIT; + case OK: break; + case FAIL_SEND: goto SEND_FAILED; + case FAIL: goto RESPONSE_FAILED; + } + } + } +sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE); + +/* The setting up of the SMTP call is now complete. Any subsequent errors are +message-specific. */ + +sx->setting_up = FALSE; + +#ifdef SUPPORT_I18N +if (sx->addrlist->prop.utf8_msg) + { + uschar * s; + + /* If the transport sets a downconversion mode it overrides any set by ACL + for the message. */ + + if ((s = sx->ob->utf8_downconvert)) + { + if (!(s = expand_string(s))) + { + message = string_sprintf("failed to expand utf8_downconvert: %s", + expand_string_message); + set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE); + yield = DEFER; + goto SEND_QUIT; + } + switch (*s) + { + case '1': sx->addrlist->prop.utf8_downcvt = TRUE; + sx->addrlist->prop.utf8_downcvt_maybe = FALSE; + break; + case '0': sx->addrlist->prop.utf8_downcvt = FALSE; + sx->addrlist->prop.utf8_downcvt_maybe = FALSE; + break; + case '-': if (s[1] == '1') + { + sx->addrlist->prop.utf8_downcvt = FALSE; + sx->addrlist->prop.utf8_downcvt_maybe = TRUE; + } + break; + } + } + + sx->utf8_needed = !sx->addrlist->prop.utf8_downcvt + && !sx->addrlist->prop.utf8_downcvt_maybe; + DEBUG(D_transport) if (!sx->utf8_needed) + debug_printf("utf8: %s downconvert\n", + sx->addrlist->prop.utf8_downcvt ? "mandatory" : "optional"); + } + +/* If this is an international message we need the host to speak SMTPUTF8 */ +if (sx->utf8_needed && !(sx->peer_offered & OPTION_UTF8)) + { + errno = ERRNO_UTF8_FWD; + goto RESPONSE_FAILED; + } +#endif /*SUPPORT_I18N*/ + +#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS) + /*XXX should tls_requiretls actually be per-addr? */ + +if ( tls_requiretls & REQUIRETLS_MSG + && !(sx->peer_offered & OPTION_REQUIRETLS) + ) + { + sx->setting_up = TRUE; + errno = ERRNO_REQUIRETLS; + message = US"REQUIRETLS support is required from the server" + " but it was not offered"; + DEBUG(D_transport) debug_printf("%s\n", message); + goto TLS_FAILED; + } +#endif + +return OK; + + + { + int code; + + RESPONSE_FAILED: + message = NULL; + sx->send_quit = check_response(sx->host, &errno, sx->addrlist->more_errno, + sx->buffer, &code, &message, &pass_message); + yield = DEFER; + goto FAILED; + + SEND_FAILED: + code = '4'; + message = US string_sprintf("send() to %s [%s] failed: %s", + sx->host->name, sx->host->address, strerror(errno)); + sx->send_quit = FALSE; + yield = DEFER; + goto FAILED; + + EHLOHELO_FAILED: + code = '4'; + message = string_sprintf("Remote host closed connection in response to %s" + " (EHLO response was: %s)", smtp_command, sx->buffer); + sx->send_quit = FALSE; + yield = DEFER; + goto FAILED; + + /* This label is jumped to directly when a TLS negotiation has failed, + or was not done for a host for which it is required. Values will be set + in message and errno, and setting_up will always be true. Treat as + a temporary error. */ + +#ifdef SUPPORT_TLS + TLS_FAILED: +# ifdef EXPERIMENTAL_REQUIRETLS + if (errno == ERRNO_REQUIRETLS) + code = '5', yield = FAIL; + /*XXX DSN will be labelled 500; prefer 530 5.7.4 */ + else +# endif + code = '4', yield = DEFER; + goto FAILED; +#endif + + /* The failure happened while setting up the call; see if the failure was + a 5xx response (this will either be on connection, or following HELO - a 5xx + after EHLO causes it to try HELO). If so, and there are no more hosts to try, + fail all addresses, as this host is never going to accept them. For other + errors during setting up (timeouts or whatever), defer all addresses, and + yield DEFER, so that the host is not tried again for a while. + + XXX This peeking for another host feels like a layering violation. We want + to note the host as unusable, but down here we shouldn't know if this was + the last host to try for the addr(list). Perhaps the upper layer should be + the one to do set_errno() ? The problem is that currently the addr is where + errno etc. are stashed, but until we run out of hosts to try the errors are + host-specific. Maybe we should enhance the host_item definition? */ + +FAILED: + sx->ok = FALSE; /* For when reached by GOTO */ + set_errno(sx->addrlist, errno, message, + sx->host->next + ? DEFER + : code == '5' +#ifdef SUPPORT_I18N + || errno == ERRNO_UTF8_FWD +#endif + ? FAIL : DEFER, + pass_message, sx->host +#ifdef EXPERIMENTAL_DSN_INFO + , sx->smtp_greeting, sx->helo_response +#endif + ); + } + + +SEND_QUIT: + +if (sx->send_quit) + (void)smtp_write_command(&sx->outblock, SCMD_FLUSH, "QUIT\r\n"); + +#ifdef SUPPORT_TLS +if (sx->cctx.tls_ctx) + { + tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT); + sx->cctx.tls_ctx = NULL; + } +#endif + +/* Close the socket, and return the appropriate value, first setting +works because the NULL setting is passed back to the calling process, and +remote_max_parallel is forced to 1 when delivering over an existing connection, +*/ + +HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n"); +if (sx->send_quit) + { + shutdown(sx->cctx.sock, SHUT_WR); + if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0) + for (rc = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && rc > 0;) + rc--; /* drain socket */ + sx->send_quit = FALSE; + } +(void)close(sx->cctx.sock); +sx->cctx.sock = -1; + +#ifndef DISABLE_EVENT +(void) event_raise(sx->tblock->event_action, US"tcp:close", NULL); +#endif + +continue_transport = NULL; +continue_hostname = NULL; +return yield; +} + + + + +/* Create the string of options that will be appended to the MAIL FROM: +in the connection context buffer */ + +static int +build_mailcmd_options(smtp_context * sx, address_item * addrlist) +{ +uschar * p = sx->buffer; +address_item * addr; +int address_count; + +*p = 0; + +/* If we know the receiving MTA supports the SIZE qualification, and we know it, +send it, adding something to the message size to allow for imprecision +and things that get added en route. Exim keeps the number of lines +in a message, so we can give an accurate value for the original message, but we +need some additional to handle added headers. (Double "." characters don't get +included in the count.) */ + +if ( message_size > 0 + && sx->peer_offered & OPTION_SIZE && !(sx->avoid_option & OPTION_SIZE)) + { +/*XXX problem here under spool_files_wireformat? +Or just forget about lines? Or inflate by a fixed proportion? */ + + sprintf(CS p, " SIZE=%d", message_size+message_linecount+sx->ob->size_addition); + while (*p) p++; + } + +#ifndef DISABLE_PRDR +/* If it supports Per-Recipient Data Reponses, and we have omre than one recipient, +request that */ + +sx->prdr_active = FALSE; +if (sx->peer_offered & OPTION_PRDR) + for (addr = addrlist; addr; addr = addr->next) + if (addr->transport_return == PENDING_DEFER) + { + for (addr = addr->next; addr; addr = addr->next) + if (addr->transport_return == PENDING_DEFER) + { /* at least two recipients to send */ + sx->prdr_active = TRUE; + sprintf(CS p, " PRDR"); p += 5; + break; + } + break; + } +#endif + +#ifdef SUPPORT_I18N +/* If it supports internationalised messages, and this meesage need that, +request it */ + +if ( sx->peer_offered & OPTION_UTF8 + && addrlist->prop.utf8_msg + && !addrlist->prop.utf8_downcvt + ) + Ustrcpy(p, " SMTPUTF8"), p += 9; +#endif + +#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS) +if (tls_requiretls & REQUIRETLS_MSG) + Ustrcpy(p, " REQUIRETLS") , p += 11; +#endif + +/* check if all addresses have DSN-lasthop flag; do not send RET and ENVID if so */ +for (sx->dsn_all_lasthop = TRUE, addr = addrlist, address_count = 0; + addr && address_count < sx->max_rcpt; + addr = addr->next) if (addr->transport_return == PENDING_DEFER) + { + address_count++; + if (!(addr->dsn_flags & rf_dsnlasthop)) + { + sx->dsn_all_lasthop = FALSE; + break; + } + } + +/* Add any DSN flags to the mail command */ + +if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop) + { + if (dsn_ret == dsn_ret_hdrs) + { Ustrcpy(p, " RET=HDRS"); p += 9; } + else if (dsn_ret == dsn_ret_full) + { Ustrcpy(p, " RET=FULL"); p += 9; } + + if (dsn_envid) + { + string_format(p, sizeof(sx->buffer) - (p-sx->buffer), " ENVID=%s", dsn_envid); + while (*p) p++; + } + } + +/* If an authenticated_sender override has been specified for this transport +instance, expand it. If the expansion is forced to fail, and there was already +an authenticated_sender for this message, the original value will be used. +Other expansion failures are serious. An empty result is ignored, but there is +otherwise no check - this feature is expected to be used with LMTP and other +cases where non-standard addresses (e.g. without domains) might be required. */ + +if (smtp_mail_auth_str(p, sizeof(sx->buffer) - (p-sx->buffer), addrlist, sx->ob)) + return ERROR; + +return OK; +} + + +static void +build_rcptcmd_options(smtp_context * sx, const address_item * addr) +{ +uschar * p = sx->buffer; +*p = 0; - esmtp = verify_check_this_host(&(ob->hosts_avoid_esmtp), NULL, - host->name, host->address, NULL) != OK; +/* Add any DSN flags to the rcpt command */ - if (esmtp) +if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop)) + { + if (addr->dsn_flags & rf_dsnflags) { - if (smtp_write_command(&outblock, FALSE, "%s %s\r\n", - lmtp? "LHLO" : "EHLO", helo_data) < 0) - goto SEND_FAILED; - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout)) + int i; + BOOL first = TRUE; + + Ustrcpy(p, " NOTIFY="); + while (*p) p++; + for (i = 0; i < nelem(rf_list); i++) if (addr->dsn_flags & rf_list[i]) { - if (errno != 0 || buffer[0] == 0 || lmtp) goto RESPONSE_FAILED; - esmtp = FALSE; + if (!first) *p++ = ','; + first = FALSE; + Ustrcpy(p, rf_names[i]); + while (*p) p++; } } - else - { - DEBUG(D_transport) - debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n"); - } - if (!esmtp) + if (addr->dsn_orcpt) { - if (smtp_write_command(&outblock, FALSE, "HELO %s\r\n", helo_data) < 0) - goto SEND_FAILED; - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout)) goto RESPONSE_FAILED; + string_format(p, sizeof(sx->buffer) - (p-sx->buffer), " ORCPT=%s", + addr->dsn_orcpt); + while (*p) p++; } + } +} - /* Set IGNOREQUOTA if the response to LHLO specifies support and the - lmtp_ignore_quota option was set. */ - - igquotstr = (lmtp && ob->lmtp_ignore_quota && - pcre_exec(regex_IGNOREQUOTA, NULL, CS buffer, Ustrlen(CS buffer), 0, - PCRE_EOPT, NULL, 0) >= 0)? US" IGNOREQUOTA" : US""; - /* Set tls_offered if the response to EHLO specifies support for STARTTLS. */ - #ifdef SUPPORT_TLS - tls_offered = esmtp && - pcre_exec(regex_STARTTLS, NULL, CS buffer, Ustrlen(buffer), 0, - PCRE_EOPT, NULL, 0) >= 0; - #endif - } +/* +Return: + 0 good, rcpt results in addr->transport_return (PENDING_OK, DEFER, FAIL) + -1 MAIL response error + -2 any non-MAIL read i/o error + -3 non-MAIL response timeout + -4 internal error; channel still usable + -5 transmit failed + */ -/* For continuing deliveries down the same channel, the socket is the standard -input, and we don't need to redo EHLO here (but may need to do so for TLS - see -below). Set up the pointer to where subsequent commands will be left, for -error messages. Note that smtp_use_size and smtp_use_pipelining will have been -set from the command line if they were set in the process that passed the -connection on. */ +int +smtp_write_mail_and_rcpt_cmds(smtp_context * sx, int * yield) +{ +address_item * addr; +int address_count; +int rc; -else +if (build_mailcmd_options(sx, sx->first_addr) != OK) { - inblock.sock = outblock.sock = fileno(stdin); - smtp_command = big_buffer; + *yield = ERROR; + return -4; } -/* If TLS is available on this connection, whether continued or not, attempt to -start up a TLS session, unless the host is in hosts_avoid_tls. If successful, -send another EHLO - the server may give a different answer in secure mode. We -use a separate buffer for reading the response to STARTTLS so that if it is -negative, the original EHLO data is available for subsequent analysis, should -the client not be required to use TLS. If the response is bad, copy the buffer -for error analysis. */ +/* From here until we send the DATA command, we can make use of PIPELINING +if the server host supports it. The code has to be able to check the responses +at any point, for when the buffer fills up, so we write it totally generally. +When PIPELINING is off, each command written reports that it has flushed the +buffer. */ + +sx->pending_MAIL = TRUE; /* The block starts with MAIL */ -#ifdef SUPPORT_TLS -if (tls_offered && !suppress_tls && - verify_check_this_host(&(ob->hosts_avoid_tls), NULL, host->name, - host->address, NULL) != OK) { - uschar buffer2[4096]; - if (smtp_write_command(&outblock, FALSE, "STARTTLS\r\n") < 0) - goto SEND_FAILED; + uschar * s = sx->from_addr; +#ifdef SUPPORT_I18N + uschar * errstr = NULL; - /* If there is an I/O error, transmission of this message is deferred. If - there is a temporary rejection of STARRTLS and tls_tempfail_tryclear is - false, we also defer. However, if there is a temporary rejection of STARTTLS - and tls_tempfail_tryclear is true, or if there is an outright rejection of - STARTTLS, we carry on. This means we will try to send the message in clear, - unless the host is in hosts_require_tls (tested below). */ + /* If we must downconvert, do the from-address here. Remember we had to + for the to-addresses (done below), and also (ugly) for re-doing when building + the delivery log line. */ - if (!smtp_read_response(&inblock, buffer2, sizeof(buffer2), '2', - ob->command_timeout)) + if ( sx->addrlist->prop.utf8_msg + && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & OPTION_UTF8)) + ) { - Ustrncpy(buffer, buffer2, sizeof(buffer)); - if (errno != 0 || buffer2[0] == 0 || - (buffer2[0] == '4' && !ob->tls_tempfail_tryclear)) - goto RESPONSE_FAILED; + if (s = string_address_utf8_to_alabel(s, &errstr), errstr) + { + set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE); + *yield = ERROR; + return -4; + } + setflag(sx->addrlist, af_utf8_downcvt); } +#endif - /* STARTTLS accepted: try to negotiate a TLS session. */ + rc = smtp_write_command(&sx->outblock, pipelining_active ? SCMD_BUFFER : SCMD_FLUSH, + "MAIL FROM:<%s>%s\r\n", s, sx->buffer); + } - else - { - int rc = tls_client_start(inblock.sock, host, addrlist, - NULL, /* No DH param */ - ob->tls_certificate, - ob->tls_privatekey, - ob->tls_verify_certificates, - ob->tls_crl, - ob->tls_require_ciphers, - ob->command_timeout); - - /* TLS negotiation failed; give an error. From outside, this function may - be called again to try in clear on a new connection, if the options permit - it for this host. */ - - if (rc != OK) - { - save_errno = ERRNO_TLSFAILURE; - message = US"failure while setting up TLS session"; - send_quit = FALSE; - goto TLS_FAILED; - } +mail_command = string_copy(big_buffer); /* Save for later error message */ - /* TLS session is set up */ +switch(rc) + { + case -1: /* Transmission error */ + return -5; - for (addr = addrlist; addr != NULL; addr = addr->next) + case +1: /* Cmd was sent */ + if (!smtp_read_response(&sx->inblock, sx->buffer, sizeof(sx->buffer), '2', + sx->ob->command_timeout)) { - if (addr->transport_return == PENDING_DEFER) - { - addr->cipher = tls_cipher; - addr->peerdn = tls_peerdn; - } + if (errno == 0 && sx->buffer[0] == '4') + { + errno = ERRNO_MAIL4XX; + sx->addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8; + } + return -1; } - } + sx->pending_MAIL = FALSE; + break; + + /* otherwise zero: command queued for pipeline */ } -/* If we started TLS, redo the EHLO/LHLO exchange over the secure channel. */ +/* Pass over all the relevant recipient addresses for this host, which are the +ones that have status PENDING_DEFER. If we are using PIPELINING, we can send +several before we have to read the responses for those seen so far. This +checking is done by a subroutine because it also needs to be done at the end. +Send only up to max_rcpt addresses at a time, leaving next_addr pointing to +the next one if not all are sent. -if (tls_active >= 0) - { - if (smtp_write_command(&outblock, FALSE, "%s %s\r\n", lmtp? "LHLO" : "EHLO", - helo_data) < 0) - goto SEND_FAILED; - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout)) - goto RESPONSE_FAILED; - } +In the MUA wrapper situation, we want to flush the PIPELINING buffer for the +last address because we want to abort if any recipients have any kind of +problem, temporary or permanent. We know that all recipient addresses will have +the PENDING_DEFER status, because only one attempt is ever made, and we know +that max_rcpt will be large, so all addresses will be done at once. -/* If the host is required to use a secure channel, ensure that we -have one. */ +For verify we flush the pipeline after any (the only) rcpt address. */ -else if (verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name, - host->address, NULL) == OK) +for (addr = sx->first_addr, address_count = 0; + addr && address_count < sx->max_rcpt; + addr = addr->next) if (addr->transport_return == PENDING_DEFER) { - save_errno = ERRNO_TLSREQUIRED; - message = string_sprintf("a TLS session is required for %s [%s], but %s", - host->name, host->address, - tls_offered? "an attempt to start TLS failed" : - "the server did not offer TLS support"); - goto TLS_FAILED; - } -#endif + int count; + BOOL no_flush; + uschar * rcpt_addr; -/* If TLS is active, we have just started it up and re-done the EHLO command, -so its response needs to be analyzed. If TLS is not active and this is a -continued session down a previously-used socket, we haven't just done EHLO, so -we skip this. */ + if (tcp_out_fastopen && !tcp_out_fastopen_logged) + { + setflag(addr, af_tcp_fastopen_conn); + if (tcp_out_fastopen > 1) setflag(addr, af_tcp_fastopen); + } -if (continue_hostname == NULL - #ifdef SUPPORT_TLS - || tls_active >= 0 - #endif - ) - { - int require_auth; - uschar *fail_reason = US"server did not advertise AUTH support"; + addr->dsn_aware = sx->peer_offered & OPTION_DSN + ? dsn_support_yes : dsn_support_no; + + address_count++; + no_flush = pipelining_active && !sx->verify + && (!mua_wrapper || addr->next && address_count < sx->max_rcpt); - /* Set for IGNOREQUOTA if the response to LHLO specifies support and the - lmtp_ignore_quota option was set. */ + build_rcptcmd_options(sx, addr); - igquotstr = (lmtp && ob->lmtp_ignore_quota && - pcre_exec(regex_IGNOREQUOTA, NULL, CS buffer, Ustrlen(CS buffer), 0, - PCRE_EOPT, NULL, 0) >= 0)? US" IGNOREQUOTA" : US""; + /* Now send the RCPT command, and process outstanding responses when + necessary. After a timeout on RCPT, we just end the function, leaving the + yield as OK, because this error can often mean that there is a problem with + just one address, so we don't want to delay the host. */ - /* If the response to EHLO specified support for the SIZE parameter, note - this, provided size_addition is non-negative. */ + rcpt_addr = transport_rcpt_address(addr, sx->tblock->rcpt_include_affixes); - smtp_use_size = esmtp && ob->size_addition >= 0 && - pcre_exec(regex_SIZE, NULL, CS buffer, Ustrlen(CS buffer), 0, - PCRE_EOPT, NULL, 0) >= 0; +#ifdef SUPPORT_I18N + if ( testflag(sx->addrlist, af_utf8_downcvt) + && !(rcpt_addr = string_address_utf8_to_alabel(rcpt_addr, NULL)) + ) + { + /*XXX could we use a per-address errstr here? Not fail the whole send? */ + errno = ERRNO_EXPANDFAIL; + return -5; /*XXX too harsh? */ + } +#endif - /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched - the current host, esmtp will be false, so PIPELINING can never be used. */ + count = smtp_write_command(&sx->outblock, no_flush ? SCMD_BUFFER : SCMD_FLUSH, + "RCPT TO:<%s>%s%s\r\n", rcpt_addr, sx->igquotstr, sx->buffer); - smtp_use_pipelining = esmtp && - pcre_exec(regex_PIPELINING, NULL, CS buffer, Ustrlen(CS buffer), 0, - PCRE_EOPT, NULL, 0) >= 0; + if (count < 0) return -5; + if (count > 0) + { + switch(sync_responses(sx, count, 0)) + { + case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */ + break; + + case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ + if (!sx->lmtp) /* can't tell about progress yet */ + sx->completed_addr = TRUE; + case 0: /* No 2xx or 5xx, but no probs */ + break; + + case -1: return -3; /* Timeout on RCPT */ + case -2: return -2; /* non-MAIL read i/o error */ + default: return -1; /* any MAIL error */ + } + sx->pending_MAIL = FALSE; /* Dealt with MAIL */ + } + } /* Loop for next address */ - DEBUG(D_transport) debug_printf("%susing PIPELINING\n", - smtp_use_pipelining? "" : "not "); +tcp_out_fastopen_logged = TRUE; +sx->next_addr = addr; +return 0; +} - /* Note if the response to EHLO specifies support for the AUTH extension. - If it has, check that this host is one we want to authenticate to, and do - the business. The host name and address must be available when the - authenticator's client driver is running. */ - smtp_authenticated = FALSE; - require_auth = verify_check_this_host(&(ob->hosts_require_auth), NULL, - host->name, host->address, NULL); +#ifdef SUPPORT_TLS +/***************************************************** +* Proxy TLS connection for another transport process * +******************************************************/ +/* +Close the unused end of the pipe, fork once more, then use the given buffer +as a staging area, and select on both the given fd and the TLS'd client-fd for +data to read (per the coding in ip_recv() and fd_ready() this is legitimate). +Do blocking full-size writes, and reads under a timeout. Once both input +channels are closed, exit the process. - if (esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1)) - { - uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]); - expand_nmax = -1; /* reset */ +Arguments: + ct_ctx tls context + buf space to use for buffering + bufsiz size of buffer + pfd pipe filedescriptor array; [0] is comms to proxied process + timeout per-read timeout, seconds +*/ - /* Must not do this check until after we have saved the result of the - regex match above. */ +void +smtp_proxy_tls(void * ct_ctx, uschar * buf, size_t bsize, int * pfd, + int timeout) +{ +fd_set rfds, efds; +int max_fd = MAX(pfd[0], tls_out.active.sock) + 1; +int rc, i, fd_bits, nbytes; - if (require_auth == OK || - verify_check_this_host(&(ob->hosts_try_auth), NULL, host->name, - host->address, NULL) == OK) - { - auth_instance *au; - fail_reason = US"no common mechanisms were found"; +close(pfd[1]); +if ((rc = fork())) + { + DEBUG(D_transport) debug_printf("proxy-proc final-pid %d\n", rc); + _exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS); + } - DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n"); +if (running_in_test_harness) millisleep(100); /* let parent debug out */ +set_process_info("proxying TLS connection for continued transport"); +FD_ZERO(&rfds); +FD_SET(tls_out.active.sock, &rfds); +FD_SET(pfd[0], &rfds); - /* Scan the configured authenticators looking for one which is configured - for use as a client and whose name matches an authentication mechanism - supported by the server. If one is found, attempt to authenticate by - calling its client function. */ +for (fd_bits = 3; fd_bits; ) + { + time_t time_left = timeout; + time_t time_start = time(NULL); - for (au = auths; !smtp_authenticated && au != NULL; au = au->next) - { - uschar *p = names; - if (!au->client) continue; + /* wait for data */ + efds = rfds; + do + { + struct timeval tv = { time_left, 0 }; - /* Loop to scan supported server mechanisms */ + rc = select(max_fd, + (SELECT_ARG2_TYPE *)&rfds, NULL, (SELECT_ARG2_TYPE *)&efds, &tv); - while (*p != 0) - { - int rc; - int len = Ustrlen(au->public_name); - while (isspace(*p)) p++; + if (rc < 0 && errno == EINTR) + if ((time_left -= time(NULL) - time_start) > 0) continue; - if (strncmpic(au->public_name, p, len) != 0 || - (p[len] != 0 && !isspace(p[len]))) - { - while (*p != 0 && !isspace(*p)) p++; - continue; - } + if (rc <= 0) + { + DEBUG(D_transport) if (rc == 0) debug_printf("%s: timed out\n", __FUNCTION__); + goto done; + } + + if (FD_ISSET(tls_out.active.sock, &efds) || FD_ISSET(pfd[0], &efds)) + { + DEBUG(D_transport) debug_printf("select: exceptional cond on %s fd\n", + FD_ISSET(pfd[0], &efds) ? "proxy" : "tls"); + goto done; + } + } + while (rc < 0 || !(FD_ISSET(tls_out.active.sock, &rfds) || FD_ISSET(pfd[0], &rfds))); - /* Found data for a listed mechanism. Call its client entry. Set - a flag in the outblock so that data is overwritten after sending so - that reflections don't show it. */ + /* handle inbound data */ + if (FD_ISSET(tls_out.active.sock, &rfds)) + if ((rc = tls_read(ct_ctx, buf, bsize)) <= 0) + { + fd_bits &= ~1; + FD_CLR(tls_out.active.sock, &rfds); + shutdown(pfd[0], SHUT_WR); + timeout = 5; + } + else + { + for (nbytes = 0; rc - nbytes > 0; nbytes += i) + if ((i = write(pfd[0], buf + nbytes, rc - nbytes)) < 0) goto done; + } + else if (fd_bits & 1) + FD_SET(tls_out.active.sock, &rfds); - fail_reason = US"authentication attempt(s) failed"; - outblock.authenticating = TRUE; - rc = (au->info->clientcode)(au, &inblock, &outblock, - ob->command_timeout, buffer, sizeof(buffer)); - outblock.authenticating = FALSE; - DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n", - au->name, rc); + /* handle outbound data */ + if (FD_ISSET(pfd[0], &rfds)) + if ((rc = read(pfd[0], buf, bsize)) <= 0) + { + fd_bits = 0; + tls_close(ct_ctx, TLS_SHUTDOWN_NOWAIT); + ct_ctx = NULL; + } + else + { + for (nbytes = 0; rc - nbytes > 0; nbytes += i) + if ((i = tls_write(ct_ctx, buf + nbytes, rc - nbytes, FALSE)) < 0) + goto done; + } + else if (fd_bits & 2) + FD_SET(pfd[0], &rfds); + } - /* A temporary authentication failure must hold up delivery to - this host. After a permanent authentication failure, we carry on - to try other authentication methods. If all fail hard, try to - deliver the message unauthenticated unless require_auth was set. */ +done: + if (running_in_test_harness) millisleep(100); /* let logging complete */ + exim_exit(0, US"TLS proxy"); +} +#endif - switch(rc) - { - case OK: - smtp_authenticated = TRUE; /* stops the outer loop */ - break; - /* Failure after writing a command */ +/************************************************* +* Deliver address list to given host * +*************************************************/ - case FAIL_SEND: - goto SEND_FAILED; +/* If continue_hostname is not null, we get here only when continuing to +deliver down an existing channel. The channel was passed as the standard +input. TLS is never active on a passed channel; the previous process always +closes it down before passing the connection on. - /* Failure after reading a response */ +Otherwise, we have to make a connection to the remote host, and do the +initial protocol exchange. - case FAIL: - if (errno != 0 || buffer[0] != '5') goto RESPONSE_FAILED; - log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s", - au->name, host->name, host->address, buffer); - break; +When running as an MUA wrapper, if the sender or any recipient is rejected, +temporarily or permanently, we force failure for all recipients. - /* Failure by some other means. In effect, the authenticator - decided it wasn't prepared to handle this case. Typically this - is the result of "fail" in an expansion string. Do we need to - log anything here? */ +Arguments: + addrlist chain of potential addresses to deliver; only those whose + transport_return field is set to PENDING_DEFER are currently + being processed; others should be skipped - they have either + been delivered to an earlier host or IP address, or been + failed by one of them. + host host to deliver to + host_af AF_INET or AF_INET6 + defport default TCP/IP port to use if host does not specify, in host + byte order + interface interface to bind to, or NULL + tblock transport instance block + message_defer set TRUE if yield is OK, but all addresses were deferred + because of a non-recipient, non-host failure, that is, a + 4xx response to MAIL FROM, DATA, or ".". This is a defer + that is specific to the message. + suppress_tls if TRUE, don't attempt a TLS connection - this is set for + a second attempt after TLS initialization fails - case CANCELLED: - break; +Returns: OK - the connection was made and the delivery attempted; + the result for each address is in its data block. + DEFER - the connection could not be made, or something failed + while setting up the SMTP session, or there was a + non-message-specific error, such as a timeout. + ERROR - a filter command is specified for this transport, + and there was a problem setting it up; OR helo_data + or add_headers or authenticated_sender is specified + for this transport, and the string failed to expand +*/ - /* Internal problem, message in buffer. */ +static int +smtp_deliver(address_item *addrlist, host_item *host, int host_af, int defport, + uschar *interface, transport_instance *tblock, + BOOL *message_defer, BOOL suppress_tls) +{ +address_item *addr; +int yield = OK; +int save_errno; +int rc; +struct timeval start_delivery_time; - case ERROR: - yield = ERROR; - set_errno(addrlist, 0, string_copy(buffer), DEFER, FALSE); - goto SEND_QUIT; - } +BOOL pass_message = FALSE; +uschar *message = NULL; +uschar new_message_id[MESSAGE_ID_LENGTH + 1]; - break; /* If not authenticated, try next authenticator */ - } /* Loop for scanning supported server mechanisms */ - } /* Loop for further authenticators */ - } - } +smtp_context sx; - /* If we haven't authenticated, but are required to, give up. */ +gettimeofday(&start_delivery_time, NULL); +suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */ +*message_defer = FALSE; - if (require_auth == OK && !smtp_authenticated) - { - yield = DEFER; - set_errno(addrlist, ERRNO_AUTHFAIL, - string_sprintf("authentication required but %s", fail_reason), DEFER, - FALSE); - goto SEND_QUIT; - } - } +sx.addrlist = addrlist; +sx.host = host; +sx.host_af = host_af, +sx.port = defport; +sx.interface = interface; +sx.helo_data = NULL; +sx.tblock = tblock; +sx.verify = FALSE; -/* The setting up of the SMTP call is now complete. Any subsequent errors are -message-specific. */ +/* Get the channel set up ready for a message (MAIL FROM being the next +SMTP command to send */ -setting_up = FALSE; +if ((rc = smtp_setup_conn(&sx, suppress_tls)) != OK) + return rc; /* If there is a filter command specified for this transport, we can now set it up. This cannot be done until the identify of the host is known. */ -if (tblock->filter_command != NULL) +if (tblock->filter_command) { - BOOL rc; - uschar buffer[64]; - sprintf(CS buffer, "%.50s transport", tblock->name); - rc = transport_set_up_command(&transport_filter_argv, tblock->filter_command, - TRUE, DEFER, addrlist, buffer, NULL); + transport_filter_timeout = tblock->filter_timeout; /* On failure, copy the error to all addresses, abandon the SMTP call, and yield ERROR. */ - if (!rc) + if (!transport_set_up_command(&transport_filter_argv, + tblock->filter_command, TRUE, DEFER, addrlist, + string_sprintf("%.50s transport", tblock->name), NULL)) { - set_errno(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER, + set_errno_nohost(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER, FALSE); yield = ERROR; - goto SEND_QUIT; - } - } - - -/* For messages that have more than the maximum number of envelope recipients, -we want to send several transactions down the same SMTP connection. (See -comments in deliver.c as to how this reconciles, heuristically, with -remote_max_parallel.) This optimization was added to Exim after the following -code was already working. The simplest way to put it in without disturbing the -code was to use a goto to jump back to this point when there is another -transaction to handle. */ - -SEND_MESSAGE: -sync_addr = first_addr; -address_count = 0; -ok = FALSE; -send_rset = TRUE; -completed_address = FALSE; - - -/* Initiate a message transfer. If we know the receiving MTA supports the SIZE -qualification, send it, adding something to the message size to allow for -imprecision and things that get added en route. Exim keeps the number of lines -in a message, so we can give an accurate value for the original message, but we -need some additional to handle added headers. (Double "." characters don't get -included in the count.) */ - -p = buffer; -*p = 0; - -if (smtp_use_size) - { - sprintf(CS p, " SIZE=%d", message_size+message_linecount+ob->size_addition); - while (*p) p++; - } - -/* Add the authenticated sender address if present */ - -if (smtp_authenticated && local_authenticated_sender != NULL) - { - string_format(p, sizeof(buffer) - (p-buffer), " AUTH=%s", - auth_xtextencode(local_authenticated_sender, - Ustrlen(local_authenticated_sender))); - } - -/* From here until we send the DATA command, we can make use of PIPELINING -if the server host supports it. The code has to be able to check the responses -at any point, for when the buffer fills up, so we write it totally generally. -When PIPELINING is off, each command written reports that it has flushed the -buffer. */ + goto SEND_QUIT; + } -pending_MAIL = TRUE; /* The block starts with MAIL */ + if ( transport_filter_argv + && *transport_filter_argv + && **transport_filter_argv + && sx.peer_offered & OPTION_CHUNKING + ) + { + sx.peer_offered &= ~OPTION_CHUNKING; + DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n"); + } + } -rc = smtp_write_command(&outblock, smtp_use_pipelining, - "MAIL FROM:<%s>%s\r\n", return_path, buffer); -mail_command = string_copy(big_buffer); /* Save for later error message */ +sx.first_addr = addrlist; -switch(rc) - { - case -1: /* Transmission error */ - goto SEND_FAILED; +/* For messages that have more than the maximum number of envelope recipients, +we want to send several transactions down the same SMTP connection. (See +comments in deliver.c as to how this reconciles, heuristically, with +remote_max_parallel.) This optimization was added to Exim after the following +code was already working. The simplest way to put it in without disturbing the +code was to use a goto to jump back to this point when there is another +transaction to handle. */ - case +1: /* Block was sent */ - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout)) goto RESPONSE_FAILED; - pending_MAIL = FALSE; - break; - } +SEND_MESSAGE: +sx.from_addr = return_path; +sx.sync_addr = sx.first_addr; +sx.ok = FALSE; +sx.send_rset = TRUE; +sx.completed_addr = FALSE; -/* Pass over all the relevant recipient addresses for this host, which are the -ones that have status PENDING_DEFER. If we are using PIPELINING, we can send -several before we have to read the responses for those seen so far. This -checking is done by a subroutine because it also needs to be done at the end. -Send only up to max_rcpt addresses at a time, leaving first_addr pointing to -the next one if not all are sent. -In the MUA wrapper situation, we want to flush the PIPELINING buffer for the -last address because we want to abort if any recipients have any kind of -problem, temporary or permanent. We know that all recipient addresses will have -the PENDING_DEFER status, because only one attempt is ever made, and we know -that max_rcpt will be large, so all addresses will be done at once. */ +/* If we are a continued-connection-after-verify the MAIL and RCPT +commands were already sent; do not re-send but do mark the addrs as +having been accepted up to RCPT stage. A traditional cont-conn +always has a sequence number greater than one. */ -for (addr = first_addr; - address_count < max_rcpt && addr != NULL; - addr = addr->next) +if (continue_hostname && continue_sequence == 1) { - int count; - BOOL no_flush; - - if (addr->transport_return != PENDING_DEFER) continue; + address_item * addr; - address_count++; - no_flush = smtp_use_pipelining && (!mua_wrapper || addr->next != NULL); + sx.peer_offered = smtp_peer_options; + sx.pending_MAIL = FALSE; + sx.ok = TRUE; + sx.next_addr = NULL; - /* Now send the RCPT command, and process outstanding responses when - necessary. After a timeout on RCPT, we just end the function, leaving the - yield as OK, because this error can often mean that there is a problem with - just one address, so we don't want to delay the host. */ + for (addr = addrlist; addr; addr = addr->next) + addr->transport_return = PENDING_OK; + } +else + { + /* Initiate a message transfer. */ - count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s\r\n", - transport_rcpt_address(addr, tblock->rcpt_include_affixes), igquotstr); - if (count < 0) goto SEND_FAILED; - if (count > 0) + switch(smtp_write_mail_and_rcpt_cmds(&sx, &yield)) { - switch(sync_responses(first_addr, tblock->rcpt_include_affixes, - &sync_addr, host, count, pending_MAIL, 0, &inblock, - ob->command_timeout, buffer, sizeof(buffer))) - { - case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */ - case 2: completed_address = TRUE; /* 5xx (only) => progress made */ - break; - - case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ - if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */ - case 0: /* No 2xx or 5xx, but no probs */ - break; - - case -1: goto END_OFF; /* Timeout on RCPT */ - default: goto RESPONSE_FAILED; /* I/O error, or any MAIL error */ - } - pending_MAIL = FALSE; /* Dealt with MAIL */ + case 0: break; + case -1: case -2: goto RESPONSE_FAILED; + case -3: goto END_OFF; + case -4: goto SEND_QUIT; + default: goto SEND_FAILED; } - } /* Loop for next address */ -/* If we are an MUA wrapper, abort if any RCPTs were rejected, either -permanently or temporarily. We should have flushed and synced after the last -RCPT. */ + /* If we are an MUA wrapper, abort if any RCPTs were rejected, either + permanently or temporarily. We should have flushed and synced after the last + RCPT. */ -if (mua_wrapper) - { - address_item *badaddr; - for (badaddr = first_addr; badaddr != NULL; badaddr = badaddr->next) - { - if (badaddr->transport_return != PENDING_OK) break; - } - if (badaddr != NULL) + if (mua_wrapper) { - set_errno(addrlist, 0, badaddr->message, FAIL, - testflag(badaddr, af_pass_message)); - ok = FALSE; + address_item * a; + unsigned cnt; + + for (a = sx.first_addr, cnt = 0; a && cnt < sx.max_rcpt; a = a->next, cnt++) + if (a->transport_return != PENDING_OK) + { + /*XXX could we find a better errno than 0 here? */ + set_errno_nohost(addrlist, 0, a->message, FAIL, + testflag(a, af_pass_message)); + sx.ok = FALSE; + break; + } } } @@ -1410,33 +3026,33 @@ if (mua_wrapper) send DATA, but if it is FALSE (in the normal, non-wrapper case), we may still have a good recipient buffered up if we are pipelining. We don't want to waste time sending DATA needlessly, so we only send it if either ok is TRUE or if we -are pipelining. The responses are all handled by sync_responses(). */ +are pipelining. The responses are all handled by sync_responses(). +If using CHUNKING, do not send a BDAT until we know how big a chunk we want +to send is. */ -if (ok || (smtp_use_pipelining && !mua_wrapper)) +if ( !(sx.peer_offered & OPTION_CHUNKING) + && (sx.ok || (pipelining_active && !mua_wrapper))) { - int count = smtp_write_command(&outblock, FALSE, "DATA\r\n"); + int count = smtp_write_command(&sx.outblock, SCMD_FLUSH, "DATA\r\n"); + if (count < 0) goto SEND_FAILED; - switch(sync_responses(first_addr, tblock->rcpt_include_affixes, &sync_addr, - host, count, pending_MAIL, ok? +1 : -1, &inblock, - ob->command_timeout, buffer, sizeof(buffer))) + switch(sync_responses(&sx, count, sx.ok ? +1 : -1)) { - case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */ - case 2: completed_address = TRUE; /* 5xx (only) => progress made */ + case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */ break; - case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ - if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */ + case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ + if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */ case 0: break; /* No 2xx or 5xx, but no probs */ case -1: goto END_OFF; /* Timeout on RCPT */ default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */ } + pipelining_active = FALSE; + data_command = string_copy(big_buffer); /* Save for later error message */ } -/* Save the first address of the next batch. */ - -first_addr = addr; - /* If there were no good recipients (but otherwise there have been no problems), just set ok TRUE, since we have handled address-specific errors already. Otherwise, it's OK to send the message. Use the check/escape mechanism @@ -1444,42 +3060,93 @@ for handling the SMTP dot-handling protocol, flagging to apply to headers as well as body. Set the appropriate timeout value to be used for each chunk. (Haven't been able to make it work using select() for writing yet.) */ -if (!ok) ok = TRUE; else +if (!(sx.peer_offered & OPTION_CHUNKING) && !sx.ok) { + /* Save the first address of the next batch. */ + sx.first_addr = sx.next_addr; + + sx.ok = TRUE; + } +else + { + transport_ctx tctx = { + {sx.cctx.sock}, /*XXX will this need TLS info? */ + tblock, + addrlist, + US".", US"..", /* Escaping strings */ + topt_use_crlf | topt_escape_headers + | (tblock->body_only ? topt_no_headers : 0) + | (tblock->headers_only ? topt_no_body : 0) + | (tblock->return_path_add ? topt_add_return_path : 0) + | (tblock->delivery_date_add ? topt_add_delivery_date : 0) + | (tblock->envelope_to_add ? topt_add_envelope_to : 0) + }; + + /* If using CHUNKING we need a callback from the generic transport + support to us, for the sending of BDAT smtp commands and the reaping + of responses. The callback needs a whole bunch of state so set up + a transport-context structure to be passed around. */ + + if (sx.peer_offered & OPTION_CHUNKING) + { + tctx.check_string = tctx.escape_string = NULL; + tctx.options |= topt_use_bdat; + tctx.chunk_cb = smtp_chunk_cmd_callback; + sx.pending_BDAT = FALSE; + sx.good_RCPT = sx.ok; + sx.cmd_count = 0; + tctx.smtp_context = &sx; + } + else + tctx.options |= topt_end_dot; + + /* Save the first address of the next batch. */ + sx.first_addr = sx.next_addr; + + /* Responses from CHUNKING commands go in buffer. Otherwise, + there has not been a response. */ + + sx.buffer[0] = 0; + sigalrm_seen = FALSE; - transport_write_timeout = ob->data_timeout; + transport_write_timeout = sx.ob->data_timeout; smtp_command = US"sending data block"; /* For error messages */ DEBUG(D_transport|D_v) - debug_printf(" SMTP>> writing message and terminating \".\"\n"); + if (sx.peer_offered & OPTION_CHUNKING) + debug_printf(" will write message using CHUNKING\n"); + else + debug_printf(" SMTP>> writing message and terminating \".\"\n"); transport_count = 0; -#ifdef EXPERIMENTAL_DOMAINKEYS - if ( (ob->dk_private_key != NULL) && (ob->dk_selector != NULL) ) - ok = dk_transport_write_message(addrlist, inblock.sock, - topt_use_crlf | topt_end_dot | topt_escape_headers | - (tblock->body_only? topt_no_headers : 0) | - (tblock->headers_only? topt_no_body : 0) | - (tblock->return_path_add? topt_add_return_path : 0) | - (tblock->delivery_date_add? topt_add_delivery_date : 0) | - (tblock->envelope_to_add? topt_add_envelope_to : 0), - 0, /* No size limit */ - tblock->add_headers, tblock->remove_headers, - US".", US"..", /* Escaping strings */ - tblock->rewrite_rules, tblock->rewrite_existflags, - ob->dk_private_key, ob->dk_domain, ob->dk_selector, - ob->dk_canon, ob->dk_headers, ob->dk_strict); - else + +#ifndef DISABLE_DKIM + dkim_exim_sign_init(); +# ifdef EXPERIMENTAL_ARC + { + uschar * s = sx.ob->arc_sign; + if (s) + { + if (!(sx.ob->dkim.arc_signspec = s = expand_string(s))) + { + if (!expand_string_forcedfail) + { + message = US"failed to expand arc_sign"; + sx.ok = FALSE; + goto SEND_FAILED; + } + } + else if (*s) + { + /* Ask dkim code to hash the body for ARC */ + (void) arc_ams_setup_sign_bodyhash(); + sx.ob->dkim.force_bodyhash = TRUE; + } + } + } +# endif + sx.ok = dkim_transport_write_message(&tctx, &sx.ob->dkim, CUSS &message); +#else + sx.ok = transport_write_message(&tctx, 0); #endif - ok = transport_write_message(addrlist, inblock.sock, - topt_use_crlf | topt_end_dot | topt_escape_headers | - (tblock->body_only? topt_no_headers : 0) | - (tblock->headers_only? topt_no_body : 0) | - (tblock->return_path_add? topt_add_return_path : 0) | - (tblock->delivery_date_add? topt_add_delivery_date : 0) | - (tblock->envelope_to_add? topt_add_envelope_to : 0), - 0, /* No size limit */ - tblock->add_headers, tblock->remove_headers, - US".", US"..", /* Escaping strings */ - tblock->rewrite_rules, tblock->rewrite_existflags); /* transport_write_message() uses write() because it is called from other places to write to non-sockets. This means that under some OS (e.g. Solaris) @@ -1489,13 +3156,12 @@ if (!ok) ok = TRUE; else transport_write_timeout = 0; /* for subsequent transports */ /* Failure can either be some kind of I/O disaster (including timeout), - or the failure of a transport filter or the expansion of added headers. */ + or the failure of a transport filter or the expansion of added headers. + Or, when CHUNKING, it can be a protocol-detected failure. */ - if (!ok) - { - buffer[0] = 0; /* There hasn't been a response */ - goto RESPONSE_FAILED; - } + if (!sx.ok) + if (message) goto SEND_FAILED; + else goto RESPONSE_FAILED; /* We used to send the terminating "." explicitly here, but because of buffering effects at both ends of TCP/IP connections, you don't gain @@ -1505,11 +3171,60 @@ if (!ok) ok = TRUE; else smtp_command = US"end of data"; - /* For SMTP, we now read a single response that applies to the whole message. - If it is OK, then all the addresses have been delivered. */ + if (sx.peer_offered & OPTION_CHUNKING && sx.cmd_count > 1) + { + /* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */ + switch(sync_responses(&sx, sx.cmd_count-1, 0)) + { + case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */ + case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */ + break; + + case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */ + if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */ + case 0: break; /* No 2xx or 5xx, but no probs */ + + case -1: goto END_OFF; /* Timeout on RCPT */ + default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */ + } + } + +#ifndef DISABLE_PRDR + /* For PRDR we optionally get a partial-responses warning + * followed by the individual responses, before going on with + * the overall response. If we don't get the warning then deal + * with per non-PRDR. */ + if(sx.prdr_active) + { + sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '3', + sx.ob->final_timeout); + if (!sx.ok && errno == 0) switch(sx.buffer[0]) + { + case '2': sx.prdr_active = FALSE; + sx.ok = TRUE; + break; + case '4': errno = ERRNO_DATA4XX; + addrlist->more_errno |= + ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + break; + } + } + else +#endif + + /* For non-PRDR SMTP, we now read a single response that applies to the + whole message. If it is OK, then all the addresses have been delivered. */ - if (!lmtp) ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->final_timeout); + if (!sx.lmtp) + { + sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2', + sx.ob->final_timeout); + if (!sx.ok && errno == 0 && sx.buffer[0] == '4') + { + errno = ERRNO_DATA4XX; + addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + } + } /* For LMTP, we get back a response for every RCPT command that we sent; some may be accepted and some rejected. For those that get a response, their @@ -1523,90 +3238,176 @@ if (!ok) ok = TRUE; else software before the spool gets updated. Also record the final SMTP confirmation if needed (for SMTP only). */ - if (ok) + if (sx.ok) { int flag = '='; - int delivery_time = (int)(time(NULL) - start_delivery_time); + struct timeval delivery_time; int len; - host_item *thost; - uschar *conf = NULL; - send_rset = FALSE; + uschar * conf = NULL; - /* Make a copy of the host if it is local to this invocation - of the transport. */ - - if (copy_host) - { - thost = store_get(sizeof(host_item)); - *thost = *host; - thost->name = string_copy(host->name); - thost->address = string_copy(host->address); - } - else thost = host; + timesince(&delivery_time, &start_delivery_time); + sx.send_rset = FALSE; + pipelining_active = FALSE; /* Set up confirmation if needed - applies only to SMTP */ - if ((log_extra_selector & LX_smtp_confirmation) != 0 && !lmtp) + if ( +#ifdef DISABLE_EVENT + LOGGING(smtp_confirmation) && +#endif + !sx.lmtp + ) { - uschar *s = string_printing(buffer); - conf = (s == buffer)? (uschar *)string_copy(s) : s; + const uschar *s = string_printing(sx.buffer); + /* deconst cast ok here as string_printing was checked to have alloc'n'copied */ + conf = (s == sx.buffer)? US string_copy(s) : US s; } - /* Process all transported addresses - for LMTP, read a status for + /* Process all transported addresses - for LMTP or PRDR, read a status for each one. */ - for (addr = addrlist; addr != first_addr; addr = addr->next) + for (addr = addrlist; addr != sx.first_addr; addr = addr->next) { if (addr->transport_return != PENDING_OK) continue; /* LMTP - if the response fails badly (e.g. timeout), use it for all the remaining addresses. Otherwise, it's a return code for just the one - address. */ + address. For temporary errors, add a retry item for the address so that + it doesn't get tried again too soon. */ - if (lmtp) +#ifndef DISABLE_PRDR + if (sx.lmtp || sx.prdr_active) +#else + if (sx.lmtp) +#endif { - if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->final_timeout)) + if (!smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2', + sx.ob->final_timeout)) { - if (errno != 0 || buffer[0] == 0) goto RESPONSE_FAILED; - addr->message = string_sprintf("LMTP error after %s: %s", - big_buffer, string_printing(buffer)); - addr->transport_return = (buffer[0] == '5')? FAIL : DEFER; + if (errno != 0 || sx.buffer[0] == 0) goto RESPONSE_FAILED; + addr->message = string_sprintf( +#ifndef DISABLE_PRDR + "%s error after %s: %s", sx.prdr_active ? "PRDR":"LMTP", +#else + "LMTP error after %s: %s", +#endif + data_command, string_printing(sx.buffer)); + setflag(addr, af_pass_message); /* Allow message to go to user */ + if (sx.buffer[0] == '5') + addr->transport_return = FAIL; + else + { + errno = ERRNO_DATA4XX; + addr->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + addr->transport_return = DEFER; +#ifndef DISABLE_PRDR + if (!sx.prdr_active) +#endif + retry_add_item(addr, addr->address_retry_key, 0); + } continue; } - completed_address = TRUE; /* NOW we can set this flag */ + sx.completed_addr = TRUE; /* NOW we can set this flag */ + if (LOGGING(smtp_confirmation)) + { + const uschar *s = string_printing(sx.buffer); + /* deconst cast ok here as string_printing was checked to have alloc'n'copied */ + conf = (s == sx.buffer) ? US string_copy(s) : US s; + } } /* SMTP, or success return from LMTP for this address. Pass back the actual host that was used. */ addr->transport_return = OK; - addr->more_errno = delivery_time; - addr->host_used = thost; + addr->more_errno = delivery_time.tv_sec; + addr->delivery_usec = delivery_time.tv_usec; + addr->host_used = host; addr->special_action = flag; addr->message = conf; + + if (sx.pipelining_used) setflag(addr, af_pipelining); +#ifndef DISABLE_PRDR + if (sx.prdr_active) setflag(addr, af_prdr_used); +#endif + if (sx.peer_offered & OPTION_CHUNKING) setflag(addr, af_chunking_used); flag = '-'; - /* Update the journal. For homonymic addresses, use the base address plus - the transport name. See lots of comments in deliver.c about the reasons - for the complications when homonyms are involved. Just carry on after - write error, as it may prove possible to update the spool file later. */ +#ifndef DISABLE_PRDR + if (!sx.prdr_active) +#endif + { + /* Update the journal. For homonymic addresses, use the base address plus + the transport name. See lots of comments in deliver.c about the reasons + for the complications when homonyms are involved. Just carry on after + write error, as it may prove possible to update the spool file later. */ + + if (testflag(addr, af_homonym)) + sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); + else + sprintf(CS sx.buffer, "%.500s\n", addr->unique); + + DEBUG(D_deliver) debug_printf("S:journalling %s\n", sx.buffer); + len = Ustrlen(CS sx.buffer); + if (write(journal_fd, sx.buffer, len) != len) + log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " + "%s: %s", sx.buffer, strerror(errno)); + } + } + +#ifndef DISABLE_PRDR + if (sx.prdr_active) + { + const uschar * overall_message; - if (testflag(addr, af_homonym)) - sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); - else - sprintf(CS buffer, "%.500s\n", addr->unique); + /* PRDR - get the final, overall response. For any non-success + upgrade all the address statuses. */ - DEBUG(D_deliver) debug_printf("journalling %s", buffer); - len = Ustrlen(CS buffer); - if (write(journal_fd, buffer, len) != len) - log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " - "%s: %s", buffer, strerror(errno)); - } + sx.ok = smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), '2', + sx.ob->final_timeout); + if (!sx.ok) + { + if(errno == 0 && sx.buffer[0] == '4') + { + errno = ERRNO_DATA4XX; + addrlist->more_errno |= ((sx.buffer[1] - '0')*10 + sx.buffer[2] - '0') << 8; + } + for (addr = addrlist; addr != sx.first_addr; addr = addr->next) + if (sx.buffer[0] == '5' || addr->transport_return == OK) + addr->transport_return = PENDING_OK; /* allow set_errno action */ + goto RESPONSE_FAILED; + } + + /* Append the overall response to the individual PRDR response for logging + and update the journal, or setup retry. */ + + overall_message = string_printing(sx.buffer); + for (addr = addrlist; addr != sx.first_addr; addr = addr->next) + if (addr->transport_return == OK) + addr->message = string_sprintf("%s\\n%s", addr->message, overall_message); + + for (addr = addrlist; addr != sx.first_addr; addr = addr->next) + if (addr->transport_return == OK) + { + if (testflag(addr, af_homonym)) + sprintf(CS sx.buffer, "%.500s/%s\n", addr->unique + 3, tblock->name); + else + sprintf(CS sx.buffer, "%.500s\n", addr->unique); + + DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx.buffer); + len = Ustrlen(CS sx.buffer); + if (write(journal_fd, sx.buffer, len) != len) + log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for " + "%s: %s", sx.buffer, strerror(errno)); + } + else if (addr->transport_return == DEFER) + retry_add_item(addr, addr->address_retry_key, -2); + } +#endif /* Ensure the journal file is pushed out to disk. */ - if (fsync(journal_fd) < 0) + if (EXIMfsync(journal_fd) < 0) log_write(0, LOG_MAIN|LOG_PANIC, "failed to fsync journal: %s", strerror(errno)); } @@ -1621,115 +3422,121 @@ assumed if errno == 0 and there is no text in the buffer. If control reaches here during the setting up phase (i.e. before MAIL FROM) then always defer, as the problem is not related to this specific message. */ -if (!ok) +if (!sx.ok) { - int code; + int code, set_rc; + uschar * set_message; RESPONSE_FAILED: - save_errno = errno; - message = NULL; - send_quit = check_response(host, &save_errno, addrlist->more_errno, - buffer, &code, &message, &pass_message); - goto FAILED; + { + save_errno = errno; + message = NULL; + sx.send_quit = check_response(host, &save_errno, addrlist->more_errno, + sx.buffer, &code, &message, &pass_message); + goto FAILED; + } SEND_FAILED: - save_errno = errno; - code = '4'; - message = US string_sprintf("send() to %s [%s] failed: %s", - host->name, host->address, strerror(save_errno)); - send_quit = FALSE; - goto FAILED; - - /* This label is jumped to directly when a TLS negotiation has failed, - or was not done for a host for which it is required. Values will be set - in message and save_errno, and setting_up will always be true. Treat as - a temporary error. */ + { + save_errno = errno; + code = '4'; + message = string_sprintf("send() to %s [%s] failed: %s", + host->name, host->address, message ? message : US strerror(save_errno)); + sx.send_quit = FALSE; + goto FAILED; + } - #ifdef SUPPORT_TLS - TLS_FAILED: - code = '4'; - #endif + FAILED: + { + BOOL message_error; - /* If the failure happened while setting up the call, see if the failure was - a 5xx response (this will either be on connection, or following HELO - a 5xx - after EHLO causes it to try HELO). If so, fail all addresses, as this host is - never going to accept them. For other errors during setting up (timeouts or - whatever), defer all addresses, and yield DEFER, so that the host is not - tried again for a while. */ + sx.ok = FALSE; /* For when reached by GOTO */ + set_message = message; - FAILED: - ok = FALSE; /* For when reached by GOTO */ + /* We want to handle timeouts after MAIL or "." and loss of connection after + "." specially. They can indicate a problem with the sender address or with + the contents of the message rather than a real error on the connection. These + cases are treated in the same way as a 4xx response. This next bit of code + does the classification. */ - if (setting_up) - { - if (code == '5') - { - set_errno(addrlist, save_errno, message, FAIL, pass_message); - } - else + switch(save_errno) { - set_errno(addrlist, save_errno, message, DEFER, pass_message); - yield = DEFER; + case 0: + case ERRNO_MAIL4XX: + case ERRNO_DATA4XX: + message_error = TRUE; + break; + + case ETIMEDOUT: + message_error = Ustrncmp(smtp_command,"MAIL",4) == 0 || + Ustrncmp(smtp_command,"end ",4) == 0; + break; + + case ERRNO_SMTPCLOSED: + message_error = Ustrncmp(smtp_command,"end ",4) == 0; + break; + + default: + message_error = FALSE; + break; } - } - /* If there was an I/O error or timeout or other transportation error, - indicated by errno being non-zero, defer all addresses and yield DEFER, - except for the case of failed add_headers expansion, or a transport filter - failure, when the yield should be ERROR, to stop it trying other hosts. + /* Handle the cases that are treated as message errors. These are: - However, handle timeouts after MAIL FROM or "." and loss of connection after - "." specially. They can indicate a problem with the sender address or with - the contents of the message rather than a real error on the connection. - Therefore, treat these cases in the same way as a 4xx response. + (a) negative response or timeout after MAIL + (b) negative response after DATA + (c) negative response or timeout or dropped connection after "." + (d) utf8 support required and not offered - The following condition tests for NOT these special cases. */ + It won't be a negative response or timeout after RCPT, as that is dealt + with separately above. The action in all cases is to set an appropriate + error code for all the addresses, but to leave yield set to OK because the + host itself has not failed. Of course, it might in practice have failed + when we've had a timeout, but if so, we'll discover that at the next + delivery attempt. For a temporary error, set the message_defer flag, and + write to the logs for information if this is not the last host. The error + for the last host will be logged as part of the address's log line. */ - else if (save_errno != 0 && - (save_errno != ETIMEDOUT || - (Ustrncmp(smtp_command,"MAIL",4) != 0 && - Ustrncmp(smtp_command,"end ",4) != 0)) && - (save_errno != ERRNO_SMTPCLOSED || - Ustrncmp(smtp_command,"end ",4) != 0)) - { - yield = (save_errno == ERRNO_CHHEADER_FAIL || - save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER; - set_errno(addrlist, save_errno, message, DEFER, pass_message); - } + if (message_error) + { + if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */ - /* Otherwise we have a message-specific error response from the remote - host. This is one of - (a) negative response or timeout after "mail from" - (b) negative response after "data" - (c) negative response or timeout or dropped connection after "." - It won't be a negative response or timeout after "rcpt to", as that is dealt - with separately above. The action in all cases is to set an appropriate - error code for all the addresses, but to leave yield set to OK because - the host itself has not failed. [It might in practice have failed for a - timeout after MAIL FROM, or "." but if so, we'll discover that at the next - delivery attempt.] For a temporary error, set the message_defer flag, and - write to the logs for information if this is not the last host. The error for - the last host will be logged as part of the address's log line. */ + /* If there's an errno, the message contains just the identity of + the host. */ - else - { - if (mua_wrapper) code = '5'; /* Force hard failure in wrapper mode */ + if (code == '5') + set_rc = FAIL; + else /* Anything other than 5 is treated as temporary */ + { + set_rc = DEFER; + if (save_errno > 0) + message = US string_sprintf("%s: %s", message, strerror(save_errno)); - set_errno(addrlist, save_errno, message, (code == '5')? FAIL : DEFER, - pass_message); + write_logs(host, message, sx.first_addr ? sx.first_addr->basic_errno : 0); + + *message_defer = TRUE; + } + } - /* If there's an errno, the message contains just the identity of - the host. */ + /* Otherwise, we have an I/O error or a timeout other than after MAIL or + ".", or some other transportation error. We defer all addresses and yield + DEFER, except for the case of failed add_headers expansion, or a transport + filter failure, when the yield should be ERROR, to stop it trying other + hosts. */ - if (code != '5') /* Anything other than 5 is treated as temporary */ + else { - if (save_errno > 0) - message = US string_sprintf("%s: %s", message, strerror(save_errno)); - if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message); - deliver_msglog("%s %s\n", tod_stamp(tod_log), message); - *message_defer = TRUE; + set_rc = DEFER; + yield = (save_errno == ERRNO_CHHEADER_FAIL || + save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER; } } + + set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host +#ifdef EXPERIMENTAL_DSN_INFO + , sx.smtp_greeting, sx.helo_response +#endif + ); } @@ -1763,85 +3570,171 @@ hosts_nopass_tls. */ DEBUG(D_transport) debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d " - "yield=%d first_address is %sNULL\n", ok, send_quit, send_rset, - continue_more, yield, (first_addr == NULL)? "":"not "); + "yield=%d first_address is %sNULL\n", sx.ok, sx.send_quit, + sx.send_rset, continue_more, yield, sx.first_addr ? "not " : ""); -if (completed_address && ok && send_quit) +if (sx.completed_addr && sx.ok && sx.send_quit) { BOOL more; - if (first_addr != NULL || continue_more || - ( - (tls_active < 0 || - verify_check_this_host(&(ob->hosts_nopass_tls), NULL, host->name, - host->address, NULL) != OK) + smtp_compare_t t_compare; + + t_compare.tblock = tblock; + t_compare.current_sender_address = sender_address; + + if ( sx.first_addr != NULL + || continue_more + || ( +#ifdef SUPPORT_TLS + ( tls_out.active.sock < 0 && !continue_proxy_cipher + || verify_check_given_host(&sx.ob->hosts_nopass_tls, host) != OK + ) && +#endif transport_check_waiting(tblock->name, host->name, - tblock->connection_max_messages, new_message_id, &more) - )) + tblock->connection_max_messages, new_message_id, &more, + (oicf)smtp_are_same_identities, (void*)&t_compare) + ) ) { uschar *msg; BOOL pass_message; - if (send_rset) - { - if (! (ok = smtp_write_command(&outblock, FALSE, "RSET\r\n") >= 0)) + if (sx.send_rset) + if (! (sx.ok = smtp_write_command(&sx.outblock, SCMD_FLUSH, "RSET\r\n") >= 0)) { msg = US string_sprintf("send() to %s [%s] failed: %s", host->name, - host->address, strerror(save_errno)); - send_quit = FALSE; + host->address, strerror(errno)); + sx.send_quit = FALSE; } - else if (! (ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout))) + else if (! (sx.ok = smtp_read_response(&sx.inblock, sx.buffer, + sizeof(sx.buffer), '2', sx.ob->command_timeout))) { int code; - send_quit = check_response(host, &errno, 0, buffer, &code, &msg, + sx.send_quit = check_response(host, &errno, 0, sx.buffer, &code, &msg, &pass_message); - if (!send_quit) + if (!sx.send_quit) { - DEBUG(D_transport) debug_printf("%s\n", msg); + DEBUG(D_transport) debug_printf("H=%s [%s] %s\n", + host->name, host->address, msg); } } - } /* Either RSET was not needed, or it succeeded */ - if (ok) + if (sx.ok) { - if (first_addr != NULL) /* More addresses still to be sent */ + int pfd[2]; + int socket_fd = sx.cctx.sock; + + + if (sx.first_addr != NULL) /* More addresses still to be sent */ { /* in this run of the transport */ continue_sequence++; /* Causes * in logging */ goto SEND_MESSAGE; } - if (continue_more) return yield; /* More addresses for another run */ - /* Pass the socket to a new Exim process. Before doing so, we must shut - down TLS. Not all MTAs allow for the continuation of the SMTP session - when TLS is shut down. We test for this by sending a new EHLO. If we - don't get a good response, we don't attempt to pass the socket on. */ + /* Unless caller said it already has more messages listed for this host, + pass the connection on to a new Exim process (below, the call to + transport_pass_socket). If the caller has more ready, just return with + the connection still open. */ - #ifdef SUPPORT_TLS - if (tls_active >= 0) - { - tls_close(TRUE); - ok = smtp_write_command(&outblock,FALSE,"EHLO %s\r\n",helo_data) >= 0 && - smtp_read_response(&inblock, buffer, sizeof(buffer), '2', - ob->command_timeout); - } - #endif +#ifdef SUPPORT_TLS + if (tls_out.active.sock >= 0) + if ( continue_more + || verify_check_given_host(&sx.ob->hosts_noproxy_tls, host) == OK) + { + /* Before passing the socket on, or returning to caller with it still + open, we must shut down TLS. Not all MTAs allow for the continuation + of the SMTP session when TLS is shut down. We test for this by sending + a new EHLO. If we don't get a good response, we don't attempt to pass + the socket on. */ + + tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_WAIT); + sx.cctx.tls_ctx = NULL; + smtp_peer_options = smtp_peer_options_wrap; + sx.ok = !sx.smtps + && smtp_write_command(&sx.outblock, SCMD_FLUSH, + "EHLO %s\r\n", sx.helo_data) >= 0 + && smtp_read_response(&sx.inblock, sx.buffer, sizeof(sx.buffer), + '2', sx.ob->command_timeout); + + if (sx.ok && continue_more) + return yield; /* More addresses for another run */ + } + else + { + /* Set up a pipe for proxying TLS for the new transport process */ + + smtp_peer_options |= OPTION_TLS; + if (sx.ok = (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0)) + socket_fd = pfd[1]; + else + set_errno(sx.first_addr, errno, US"internal allocation problem", + DEFER, FALSE, host +# ifdef EXPERIMENTAL_DSN_INFO + , sx.smtp_greeting, sx.helo_response +# endif + ); + } + else +#endif + if (continue_more) + return yield; /* More addresses for another run */ - /* If the socket is successfully passed, we musn't send QUIT (or + /* If the socket is successfully passed, we mustn't send QUIT (or indeed anything!) from here. */ - if (ok && transport_pass_socket(tblock->name, host->name, host->address, - new_message_id, inblock.sock)) - { - send_quit = FALSE; - } +/*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to +propagate it from the initial +*/ + if (sx.ok && transport_pass_socket(tblock->name, host->name, + host->address, new_message_id, socket_fd)) + { + sx.send_quit = FALSE; + + /* We have passed the client socket to a fresh transport process. + If TLS is still active, we need to proxy it for the transport we + just passed the baton to. Fork a child to to do it, and return to + get logging done asap. Which way to place the work makes assumptions + about post-fork prioritisation which may not hold on all platforms. */ +#ifdef SUPPORT_TLS + if (tls_out.active.sock >= 0) + { + int pid = fork(); + if (pid == 0) /* child; fork again to disconnect totally */ + { + if (running_in_test_harness) millisleep(100); /* let parent debug out */ + /* does not return */ + smtp_proxy_tls(sx.cctx.tls_ctx, sx.buffer, sizeof(sx.buffer), pfd, + sx.ob->command_timeout); + } + + if (pid > 0) /* parent */ + { + DEBUG(D_transport) debug_printf("proxy-proc inter-pid %d\n", pid); + close(pfd[0]); + /* tidy the inter-proc to disconn the proxy proc */ + waitpid(pid, NULL, 0); + tls_close(sx.cctx.tls_ctx, TLS_NO_SHUTDOWN); + sx.cctx.tls_ctx = NULL; + (void)close(sx.cctx.sock); + sx.cctx.sock = -1; + continue_transport = NULL; + continue_hostname = NULL; + return yield; + } + log_write(0, LOG_PANIC_DIE, "fork failed"); + } +#endif + } } /* If RSET failed and there are addresses left, they get deferred. */ - - else set_errno(first_addr, errno, msg, DEFER, FALSE); + else + set_errno(sx.first_addr, errno, msg, DEFER, FALSE, host +#ifdef EXPERIMENTAL_DSN_INFO + , sx.smtp_greeting, sx.helo_response +#endif + ); } } @@ -1864,17 +3757,16 @@ This change is being made on 31-Jul-98. After over a year of trouble-free operation, the old commented-out code was removed on 17-Sep-99. */ SEND_QUIT: -if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n"); +if (sx.send_quit) (void)smtp_write_command(&sx.outblock, SCMD_FLUSH, "QUIT\r\n"); END_OFF: #ifdef SUPPORT_TLS -tls_close(TRUE); +tls_close(sx.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT); +sx.cctx.tls_ctx = NULL; #endif /* Close the socket, and return the appropriate value, first setting -continue_transport and continue_hostname NULL to prevent any other addresses -that may include the host from trying to re-use a continuation socket. This works because the NULL setting is passed back to the calling process, and remote_max_parallel is forced to 1 when delivering over an existing connection, @@ -1884,7 +3776,20 @@ writing RSET might have failed, or there may be other addresses whose hosts are specified in the transports, and therefore not visible at top level, in which case continue_more won't get set. */ -(void)close(inblock.sock); +HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n"); +if (sx.send_quit) + { + shutdown(sx.cctx.sock, SHUT_WR); + if (fcntl(sx.cctx.sock, F_SETFL, O_NONBLOCK) == 0) + for (rc = 16; read(sx.cctx.sock, sx.inbuffer, sizeof(sx.inbuffer)) > 0 && rc > 0;) + rc--; /* drain socket */ + } +(void)close(sx.cctx.sock); + +#ifndef DISABLE_EVENT +(void) event_raise(tblock->event_action, US"tcp:close", NULL); +#endif + continue_transport = NULL; continue_hostname = NULL; return yield; @@ -1914,30 +3819,35 @@ void smtp_transport_closedown(transport_instance *tblock) { smtp_transport_options_block *ob = - (smtp_transport_options_block *)(tblock->options_block); + (smtp_transport_options_block *)tblock->options_block; +client_conn_ctx cctx; smtp_inblock inblock; smtp_outblock outblock; uschar buffer[256]; uschar inbuffer[4096]; uschar outbuffer[16]; -inblock.sock = fileno(stdin); +/*XXX really we need an active-smtp-client ctx, rather than assuming stdout */ +cctx.sock = fileno(stdin); +cctx.tls_ctx = cctx.sock == tls_out.active.sock ? tls_out.active.tls_ctx : NULL; + +inblock.cctx = &cctx; inblock.buffer = inbuffer; inblock.buffersize = sizeof(inbuffer); inblock.ptr = inbuffer; inblock.ptrend = inbuffer; -outblock.sock = inblock.sock; +outblock.cctx = &cctx; outblock.buffersize = sizeof(outbuffer); outblock.buffer = outbuffer; outblock.ptr = outbuffer; outblock.cmd_count = 0; outblock.authenticating = FALSE; -(void)smtp_write_command(&outblock, FALSE, "QUIT\r\n"); +(void)smtp_write_command(&outblock, SCMD_FLUSH, "QUIT\r\n"); (void)smtp_read_response(&inblock, buffer, sizeof(buffer), '2', ob->command_timeout); -(void)close(inblock.sock); +(void)close(cctx.sock); } @@ -1965,19 +3875,26 @@ prepare_addresses(address_item *addrlist, host_item *host) { address_item *first_addr = NULL; address_item *addr; -for (addr = addrlist; addr != NULL; addr = addr->next) - { - if (addr->transport_return != DEFER) continue; - if (first_addr == NULL) first_addr = addr; - addr->transport_return = PENDING_DEFER; - addr->basic_errno = 0; - addr->more_errno = (host->mx >= 0)? 'M' : 'A'; - addr->message = NULL; - #ifdef SUPPORT_TLS - addr->cipher = NULL; - addr->peerdn = NULL; - #endif - } +for (addr = addrlist; addr; addr = addr->next) + if (addr->transport_return == DEFER) + { + if (!first_addr) first_addr = addr; + addr->transport_return = PENDING_DEFER; + addr->basic_errno = 0; + addr->more_errno = (host->mx >= 0)? 'M' : 'A'; + addr->message = NULL; +#ifdef SUPPORT_TLS + addr->cipher = NULL; + addr->ourcert = NULL; + addr->peercert = NULL; + addr->peerdn = NULL; + addr->ocsp = OCSP_NOT_REQ; +#endif +#ifdef EXPERIMENTAL_DSN_INFO + addr->smtp_greeting = NULL; + addr->helo_response = NULL; +#endif + } return first_addr; } @@ -1999,7 +3916,7 @@ smtp_transport_entry( address_item *addrlist) /* addresses we are working on */ { int cutoff_retry; -int port; +int defport; int hosts_defer = 0; int hosts_fail = 0; int hosts_looked_up = 0; @@ -2009,32 +3926,52 @@ int hosts_total = 0; int total_hosts_tried = 0; address_item *addr; BOOL expired = TRUE; -BOOL continuing = continue_hostname != NULL; uschar *expanded_hosts = NULL; uschar *pistring; uschar *tid = string_sprintf("%s transport", tblock->name); smtp_transport_options_block *ob = (smtp_transport_options_block *)(tblock->options_block); host_item *hostlist = addrlist->host_list; -host_item *host = NULL; +host_item *host; DEBUG(D_transport) { debug_printf("%s transport entered\n", tblock->name); - for (addr = addrlist; addr != NULL; addr = addr->next) + for (addr = addrlist; addr; addr = addr->next) debug_printf(" %s\n", addr->address); - if (continuing) debug_printf("already connected to %s [%s]\n", - continue_hostname, continue_host_address); + if (hostlist) + { + debug_printf("hostlist:\n"); + for (host = hostlist; host; host = host->next) + debug_printf(" '%s' IP %s port %d\n", host->name, host->address, host->port); + } + if (continue_hostname) + debug_printf("already connected to %s [%s] (on fd %d)\n", + continue_hostname, continue_host_address, + cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0); } +/* Set the flag requesting that these hosts be added to the waiting +database if the delivery fails temporarily or if we are running with +queue_smtp or a 2-stage queue run. This gets unset for certain +kinds of error, typically those that are specific to the message. */ + +update_waiting = TRUE; + /* If a host list is not defined for the addresses - they must all have the same one in order to be passed to a single transport - or if the transport has a host list with hosts_override set, use the host list supplied with the transport. It is an error for this not to exist. */ -if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL)) +#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_REQUIRETLS) +if (tls_requiretls & REQUIRETLS_MSG) + ob->tls_tempfail_tryclear = FALSE; /*XXX surely we should have a local for this + rather than modifying the transport? */ +#endif + +if (!hostlist || (ob->hosts_override && ob->hosts)) { - if (ob->hosts == NULL) + if (!ob->hosts) { addrlist->message = string_sprintf("%s transport called with no hosts set", tblock->name); @@ -2053,18 +3990,17 @@ if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL)) as the hosts string will never be used again, it doesn't matter that we replace all the : characters with zeros. */ - if (ob->hostlist == NULL) + if (!ob->hostlist) { uschar *s = ob->hosts; if (Ustrchr(s, '$') != NULL) { - expanded_hosts = expand_string(s); - if (expanded_hosts == NULL) + if (!(expanded_hosts = expand_string(s))) { addrlist->message = string_sprintf("failed to expand list of hosts " "\"%s\" in %s transport: %s", s, tblock->name, expand_string_message); - addrlist->transport_return = search_find_defer? DEFER : PANIC; + addrlist->transport_return = search_find_defer ? DEFER : PANIC; return FALSE; /* Only top address has status */ } DEBUG(D_transport) debug_printf("expanded list of hosts \"%s\" to " @@ -2076,16 +4012,26 @@ if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL)) host_build_hostlist(&hostlist, s, ob->hosts_randomize); + /* Check that the expansion yielded something useful. */ + if (!hostlist) + { + addrlist->message = + string_sprintf("%s transport has empty hosts setting", tblock->name); + addrlist->transport_return = PANIC; + return FALSE; /* Only top address has status */ + } + /* If there was no expansion of hosts, save the host list for next time. */ - if (expanded_hosts == NULL) ob->hostlist = hostlist; + if (!expanded_hosts) ob->hostlist = hostlist; } /* This is not the first time this transport has been run in this delivery; the host list was built previously. */ - else hostlist = ob->hostlist; + else + hostlist = ob->hostlist; } /* The host list was supplied with the address. If hosts_randomize is set, we @@ -2093,17 +4039,17 @@ must sort it into a random order if it did not come from MX records and has not already been randomized (but don't bother if continuing down an existing connection). */ -else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing) +else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continue_hostname) { host_item *newlist = NULL; - while (hostlist != NULL) + while (hostlist) { host_item *h = hostlist; hostlist = hostlist->next; h->sort_key = random_number(100); - if (newlist == NULL) + if (!newlist) { h->next = NULL; newlist = h; @@ -2116,7 +4062,7 @@ else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing) else { host_item *hh = newlist; - while (hh->next != NULL) + while (hh->next) { if (h->sort_key < hh->next->sort_key) break; hh = hh->next; @@ -2129,11 +4075,9 @@ else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing) hostlist = addrlist->host_list = newlist; } - /* Sort out the default port. */ -if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE; - +if (!smtp_get_port(ob->port, addrlist, &defport, tid)) return FALSE; /* For each host-plus-IP-address on the list: @@ -2180,26 +4124,26 @@ the current message. To cope with this, we have to go round the loop a second time. After that, set the status and error data for any addresses that haven't had it set already. */ -for (cutoff_retry = 0; expired && - cutoff_retry < ((ob->delay_after_cutoff)? 1 : 2); +for (cutoff_retry = 0; + expired && cutoff_retry < (ob->delay_after_cutoff ? 1 : 2); cutoff_retry++) { host_item *nexthost = NULL; int unexpired_hosts_tried = 0; + BOOL continue_host_tried = FALSE; +retry_non_continued: for (host = hostlist; - host != NULL && - unexpired_hosts_tried < ob->hosts_max_try && - total_hosts_tried < ob->hosts_max_try_hardlimit; + host + && unexpired_hosts_tried < ob->hosts_max_try + && total_hosts_tried < ob->hosts_max_try_hardlimit; host = nexthost) { int rc; int host_af; uschar *rs; - BOOL serialized = FALSE; BOOL host_is_expired = FALSE; BOOL message_defer = FALSE; - BOOL ifchanges = FALSE; BOOL some_deferred = FALSE; address_item *first_addr = NULL; uschar *interface = NULL; @@ -2213,13 +4157,6 @@ for (cutoff_retry = 0; expired && nexthost = host->next; - /* Set the flag requesting that this host be added to the waiting - database if the delivery fails temporarily or if we are running with - queue_smtp or a 2-stage queue run. This gets unset for certain - kinds of error, typically those that are specific to the message. */ - - host->update_waiting = TRUE; - /* If the address hasn't yet been obtained from the host name, look it up now, unless the host is already marked as unusable. If it is marked as unusable, it means that the router was unable to find its IP address (in @@ -2234,11 +4171,10 @@ for (cutoff_retry = 0; expired && Note that we mustn't skip unusable hosts if the address is not unset; they may be needed as expired hosts on the 2nd time round the cutoff loop. */ - if (host->address == NULL) + if (!host->address) { - int new_port; + int new_port, flags; host_item *hh; - uschar *canonical_name; if (host->status >= hstatus_unusable) { @@ -2261,16 +4197,16 @@ for (cutoff_retry = 0; expired && /* Find by name if so configured, or if it's an IP address. We don't just copy the IP address, because we need the test-for-local to happen. */ + flags = HOST_FIND_BY_A | HOST_FIND_BY_AAAA; + if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE; + if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS; + if (ob->gethostbyname || string_is_ip_address(host->name, NULL) != 0) - rc = host_find_byname(host, NULL, &canonical_name, TRUE); + rc = host_find_byname(host, NULL, flags, NULL, TRUE); else - { - int flags = HOST_FIND_BY_A; - if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE; - if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS; rc = host_find_bydns(host, NULL, flags, NULL, NULL, NULL, - &canonical_name, NULL); - } + &ob->dnssec, /* domains for request/require */ + NULL, NULL); /* Update the host (and any additional blocks, resulting from multihoming) with a host-specific port, if any. */ @@ -2285,7 +4221,7 @@ for (cutoff_retry = 0; expired && commonly points to a configuration error, but the best action is still to carry on for the next host. */ - if (rc == HOST_FIND_AGAIN || rc == HOST_FIND_FAILED) + if (rc == HOST_FIND_AGAIN || rc == HOST_FIND_SECURITY || rc == HOST_FIND_FAILED) { retry_add_item(addrlist, string_sprintf("R:%s", host->name), 0); expired = FALSE; @@ -2294,12 +4230,15 @@ for (cutoff_retry = 0; expired && "HOST_FIND_AGAIN" : "HOST_FIND_FAILED", host->name); host->status = hstatus_unusable; - for (addr = addrlist; addr != NULL; addr = addr->next) + for (addr = addrlist; addr; addr = addr->next) { if (addr->transport_return != DEFER) continue; addr->basic_errno = ERRNO_UNKNOWNHOST; - addr->message = - string_sprintf("failed to lookup IP address for %s", host->name); + addr->message = string_sprintf( + rc == HOST_FIND_SECURITY + ? "lookup of IP address for %s was insecure" + : "failed to lookup IP address for %s", + host->name); } continue; } @@ -2310,7 +4249,7 @@ for (cutoff_retry = 0; expired && if (rc == HOST_FOUND_LOCAL && !ob->allow_localhost) { - for (addr = addrlist; addr != NULL; addr = addr->next) + for (addr = addrlist; addr; addr = addr->next) { addr->basic_errno = 0; addr->message = string_sprintf("%s transport found host %s to be " @@ -2326,12 +4265,16 @@ for (cutoff_retry = 0; expired && result of the lookup. Set expired FALSE, to save the outer loop executing twice. */ - if (continuing && (Ustrcmp(continue_hostname, host->name) != 0 || - Ustrcmp(continue_host_address, host->address) != 0)) - { - expired = FALSE; - continue; /* With next host */ - } + if (continue_hostname) + if ( Ustrcmp(continue_hostname, host->name) != 0 + || Ustrcmp(continue_host_address, host->address) != 0 + ) + { + expired = FALSE; + continue; /* With next host */ + } + else + continue_host_tried = TRUE; /* Reset the default next host in case a multihomed host whose addresses are not looked up till just above added to the host list. */ @@ -2346,15 +4289,14 @@ for (cutoff_retry = 0; expired && doing a two-stage queue run, don't do this if forcing. */ if ((!deliver_force || queue_2stage) && (queue_smtp || - match_isinlist(addrlist->domain, &queue_smtp_domains, 0, + match_isinlist(addrlist->domain, + (const uschar **)&queue_smtp_domains, 0, &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK)) { expired = FALSE; - for (addr = addrlist; addr != NULL; addr = addr->next) - { - if (addr->transport_return != DEFER) continue; - addr->message = US"domain matches queue_smtp_domains, or -odqs set"; - } + for (addr = addrlist; addr; addr = addr->next) + if (addr->transport_return == DEFER) + addr->message = US"domain matches queue_smtp_domains, or -odqs set"; continue; /* With next host */ } @@ -2369,25 +4311,31 @@ for (cutoff_retry = 0; expired && deliver_host = host->name; deliver_host_address = host->address; + lookup_dnssec_authenticated = host->dnssec == DS_YES ? US"yes" + : host->dnssec == DS_NO ? US"no" + : US""; /* Set up a string for adding to the retry key if the port number is not the standard SMTP port. A host may have its own port setting that overrides the default. */ - pistring = string_sprintf(":%d", (host->port == PORT_NONE)? - port : host->port); + pistring = string_sprintf(":%d", host->port == PORT_NONE + ? defport : host->port); if (Ustrcmp(pistring, ":25") == 0) pistring = US""; /* Select IPv4 or IPv6, and choose an outgoing interface. If the interface - string changes upon expansion, we must add it to the key that is used for - retries, because connections to the same host from a different interface - should be treated separately. */ + string is set, even if constant (as different transports can have different + constant settings), we must add it to the key that is used for retries, + because connections to the same host from a different interface should be + treated separately. */ - host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET : AF_INET6; - if (!smtp_get_interface(ob->interface, host_af, addrlist, &ifchanges, - &interface, tid)) - return FALSE; - if (ifchanges) pistring = string_sprintf("%s/%s", pistring, interface); + host_af = Ustrchr(host->address, ':') == NULL ? AF_INET : AF_INET6; + if ((rs = ob->interface) && *rs) + { + if (!smtp_get_interface(rs, host_af, addrlist, &interface, tid)) + return FALSE; + pistring = string_sprintf("%s/%s", pistring, interface); + } /* The first time round the outer loop, check the status of the host by inspecting the retry data. The second time round, we are interested only @@ -2395,16 +4343,22 @@ for (cutoff_retry = 0; expired && if (cutoff_retry == 0) { + BOOL incl_ip; /* Ensure the status of the address is set by checking retry data if - necessary. There maybe host-specific retry data (applicable to all + necessary. There may be host-specific retry data (applicable to all messages) and also data for retries of a specific message at this host. If either of these retry records are actually read, the keys used are returned to save recomputing them later. */ + if (exp_bool(addrlist, US"transport", tblock->name, D_transport, + US"retry_include_ip_address", ob->retry_include_ip_address, + ob->expand_retry_include_ip_address, &incl_ip) != OK) + continue; /* with next host */ + host_is_expired = retry_check_address(addrlist->domain, host, pistring, - ob->retry_include_ip_address, &retry_host_key, &retry_message_key); + incl_ip, &retry_host_key, &retry_message_key); - DEBUG(D_transport) debug_printf("%s [%s]%s status = %s\n", host->name, + DEBUG(D_transport) debug_printf("%s [%s]%s retry-status = %s\n", host->name, (host->address == NULL)? US"" : host->address, pistring, (host->status == hstatus_usable)? "usable" : (host->status == hstatus_unusable)? "unusable" : @@ -2416,24 +4370,25 @@ for (cutoff_retry = 0; expired && switch (host->status) { case hstatus_unusable: - expired = FALSE; - setflag(addrlist, af_retry_skipped); - /* Fall through */ + expired = FALSE; + setflag(addrlist, af_retry_skipped); + /* Fall through */ case hstatus_unusable_expired: - switch (host->why) - { - case hwhy_retry: hosts_retry++; break; - case hwhy_failed: hosts_fail++; break; - case hwhy_deferred: hosts_defer++; break; - } - - /* If there was a retry message key, implying that previously there - was a message-specific defer, we don't want to update the list of - messages waiting for this host. */ - - if (retry_message_key != NULL) host->update_waiting = FALSE; - continue; /* With the next host or IP address */ + switch (host->why) + { + case hwhy_retry: hosts_retry++; break; + case hwhy_failed: hosts_fail++; break; + case hwhy_insecure: + case hwhy_deferred: hosts_defer++; break; + } + + /* If there was a retry message key, implying that previously there + was a message-specific defer, we don't want to update the list of + messages waiting for these hosts. */ + + if (retry_message_key) update_waiting = FALSE; + continue; /* With the next host or IP address */ } } @@ -2442,12 +4397,11 @@ for (cutoff_retry = 0; expired && else { - if (host->address == NULL || - host->status != hstatus_unusable_expired || - host->last_try > received_time) + if ( !host->address + || host->status != hstatus_unusable_expired + || host->last_try > received_time.tv_sec) continue; - DEBUG(D_transport) - debug_printf("trying expired host %s [%s]%s\n", + DEBUG(D_transport) debug_printf("trying expired host %s [%s]%s\n", host->name, host->address, pistring); host_is_expired = TRUE; } @@ -2464,12 +4418,11 @@ for (cutoff_retry = 0; expired && and remember this for later deletion. Do not do any of this if we are sending the message down a pre-existing connection. */ - if (!continuing && - verify_check_this_host(&(ob->serialize_hosts), NULL, host->name, - host->address, NULL) == OK) + if ( !continue_hostname + && verify_check_given_host(&ob->serialize_hosts, host) == OK) { serialize_key = string_sprintf("host-serialize-%s", host->name); - if (!enq_start(serialize_key)) + if (!enq_start(serialize_key, 1)) { DEBUG(D_transport) debug_printf("skipping host %s because another Exim process " @@ -2477,7 +4430,6 @@ for (cutoff_retry = 0; expired && hosts_serial++; continue; } - serialized = TRUE; } /* OK, we have an IP address that is not waiting for its retry time to @@ -2491,11 +4443,11 @@ for (cutoff_retry = 0; expired && DEBUG(D_transport) debug_printf("delivering %s to %s [%s] (%s%s)\n", message_id, host->name, host->address, addrlist->address, - (addrlist->next == NULL)? "" : ", ..."); + addrlist->next ? ", ..." : ""); set_process_info("delivering %s to %s [%s] (%s%s)", message_id, host->name, host->address, addrlist->address, - (addrlist->next == NULL)? "" : ", ..."); + addrlist->next ? ", ..." : ""); /* This is not for real; don't do the delivery. If there are any remaining hosts, list them. */ @@ -2503,8 +4455,8 @@ for (cutoff_retry = 0; expired && if (dont_deliver) { host_item *host2; - set_errno(addrlist, 0, NULL, OK, FALSE); - for (addr = addrlist; addr != NULL; addr = addr->next) + set_errno_nohost(addrlist, 0, NULL, OK, FALSE); + for (addr = addrlist; addr; addr = addr->next) { addr->host_used = host; addr->special_action = '*'; @@ -2514,9 +4466,9 @@ for (cutoff_retry = 0; expired && { debug_printf("*** delivery by %s transport bypassed by -N option\n" "*** host and remaining hosts:\n", tblock->name); - for (host2 = host; host2 != NULL; host2 = host2->next) + for (host2 = host; host2; host2 = host2->next) debug_printf(" %s [%s]\n", host2->name, - (host2->address == NULL)? US"unset" : host2->address); + host2->address ? host2->address : US"unset"); } rc = OK; } @@ -2536,27 +4488,40 @@ for (cutoff_retry = 0; expired && else { + host_item * thost; + /* Make a copy of the host if it is local to this invocation + of the transport. */ + + if (expanded_hosts) + { + thost = store_get(sizeof(host_item)); + *thost = *host; + thost->name = string_copy(host->name); + thost->address = string_copy(host->address); + } + else + thost = host; + if (!host_is_expired && ++unexpired_hosts_tried >= ob->hosts_max_try) { host_item *h; DEBUG(D_transport) debug_printf("hosts_max_try limit reached with this host\n"); - for (h = host; h != NULL; h = h->next) - if (h->mx != host->mx) break; - if (h != NULL) - { - nexthost = h; - unexpired_hosts_tried--; - DEBUG(D_transport) debug_printf("however, a higher MX host exists " - "and will be tried\n"); - } + for (h = host; h; h = h->next) if (h->mx != host->mx) + { + nexthost = h; + unexpired_hosts_tried--; + DEBUG(D_transport) debug_printf("however, a higher MX host exists " + "and will be tried\n"); + break; + } } /* Attempt the delivery. */ total_hosts_tried++; - rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock, - expanded_hosts != NULL, &message_defer, FALSE); + rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock, + &message_defer, FALSE); /* Yield is one of: OK => connection made, each address contains its result; @@ -2573,9 +4538,14 @@ for (cutoff_retry = 0; expired && failures, where the log has already been written. If all hosts defer a general message is written at the end. */ - if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL && - first_addr->basic_errno != ERRNO_TLSFAILURE) - write_logs(first_addr, host); + if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL + && first_addr->basic_errno != ERRNO_TLSFAILURE) + write_logs(host, first_addr->message, first_addr->basic_errno); + +#ifndef DISABLE_EVENT + if (rc == DEFER) + deferred_event_raise(first_addr, host); +#endif /* If STARTTLS was accepted, but there was a failure in setting up the TLS session (usually a certificate screwup), and the host is not in @@ -2586,35 +4556,43 @@ for (cutoff_retry = 0; expired && session, so the in-clear transmission after those errors, if permitted, happens inside smtp_deliver().] */ - #ifdef SUPPORT_TLS - if (rc == DEFER && first_addr->basic_errno == ERRNO_TLSFAILURE && - ob->tls_tempfail_tryclear && - verify_check_this_host(&(ob->hosts_require_tls), NULL, host->name, - host->address, NULL) != OK) +#ifdef SUPPORT_TLS + if ( rc == DEFER + && first_addr->basic_errno == ERRNO_TLSFAILURE + && ob->tls_tempfail_tryclear + && verify_check_given_host(&ob->hosts_require_tls, host) != OK + ) { - log_write(0, LOG_MAIN, "TLS session failure: delivering unencrypted " - "to %s [%s] (not in hosts_require_tls)", host->name, host->address); + log_write(0, LOG_MAIN, + "%s: delivering unencrypted to H=%s [%s] (not in hosts_require_tls)", + first_addr->message, host->name, host->address); first_addr = prepare_addresses(addrlist, host); - rc = smtp_deliver(addrlist, host, host_af, port, interface, tblock, - expanded_hosts != NULL, &message_defer, TRUE); + rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock, + &message_defer, TRUE); if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL) - write_logs(first_addr, host); + write_logs(host, first_addr->message, first_addr->basic_errno); +# ifndef DISABLE_EVENT + if (rc == DEFER) + deferred_event_raise(first_addr, host); +# endif } - #endif +#endif /*SUPPORT_TLS*/ } /* Delivery attempt finished */ - rs = (rc == OK)? US"OK" : (rc == DEFER)? US"DEFER" : (rc == ERROR)? - US"ERROR" : US"?"; + rs = rc == OK ? US"OK" + : rc == DEFER ? US"DEFER" + : rc == ERROR ? US"ERROR" + : US"?"; set_process_info("delivering %s: just tried %s [%s] for %s%s: result %s", message_id, host->name, host->address, addrlist->address, - (addrlist->next == NULL)? "" : " (& others)", rs); + addrlist->next ? " (& others)" : "", rs); /* Release serialization if set up */ - if (serialized) enq_end(serialize_key); + if (serialize_key) enq_end(serialize_key); /* If the result is DEFER, or if a host retry record is known to exist, we need to add an item to the retry chain for updating the retry database @@ -2624,14 +4602,20 @@ for (cutoff_retry = 0; expired && the unusable tree at the outer level, so even if different address blocks contain the same address, it still won't get tried again.) */ - if (rc == DEFER || retry_host_key != NULL) + if (rc == DEFER || retry_host_key) { - int delete_flag = (rc != DEFER)? rf_delete : 0; - if (retry_host_key == NULL) + int delete_flag = rc != DEFER ? rf_delete : 0; + if (!retry_host_key) { - retry_host_key = ob->retry_include_ip_address? - string_sprintf("T:%S:%s%s", host->name, host->address, pistring) : - string_sprintf("T:%S%s", host->name, pistring); + BOOL incl_ip; + if (exp_bool(addrlist, US"transport", tblock->name, D_transport, + US"retry_include_ip_address", ob->retry_include_ip_address, + ob->expand_retry_include_ip_address, &incl_ip) != OK) + incl_ip = TRUE; /* error; use most-specific retry record */ + + retry_host_key = incl_ip + ? string_sprintf("T:%S:%s%s", host->name, host->address, pistring) + : string_sprintf("T:%S%s", host->name, pistring); } /* If a delivery of another message over an existing SMTP connection @@ -2644,7 +4628,7 @@ for (cutoff_retry = 0; expired && host is genuinely down, another non-continued message delivery will notice it soon enough. */ - if (delete_flag != 0 || !continuing) + if (delete_flag != 0 || !continue_hostname) retry_add_item(first_addr, retry_host_key, rf_host | delete_flag); /* We may have tried an expired host, if its retry time has come; ensure @@ -2652,8 +4636,8 @@ for (cutoff_retry = 0; expired && if (rc == DEFER) { - host->status = (host_is_expired)? - hstatus_unusable_expired : hstatus_unusable; + host->status = host_is_expired + ? hstatus_unusable_expired : hstatus_unusable; host->why = hwhy_deferred; } } @@ -2664,21 +4648,27 @@ for (cutoff_retry = 0; expired && to the retry chain. Note that if there was a message defer but now there is a host defer, the message defer record gets deleted. That seems perfectly reasonable. Also, stop the message from being remembered as waiting - for this host. */ + for specific hosts. */ - if (message_defer || retry_message_key != NULL) + if (message_defer || retry_message_key) { - int delete_flag = message_defer? 0 : rf_delete; - if (retry_message_key == NULL) + int delete_flag = message_defer ? 0 : rf_delete; + if (!retry_message_key) { - retry_message_key = ob->retry_include_ip_address? - string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring, - message_id) : - string_sprintf("T:%S%s:%s", host->name, pistring, message_id); + BOOL incl_ip; + if (exp_bool(addrlist, US"transport", tblock->name, D_transport, + US"retry_include_ip_address", ob->retry_include_ip_address, + ob->expand_retry_include_ip_address, &incl_ip) != OK) + incl_ip = TRUE; /* error; use most-specific retry record */ + + retry_message_key = incl_ip + ? string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring, + message_id) + : string_sprintf("T:%S%s:%s", host->name, pistring, message_id); } retry_add_item(addrlist, retry_message_key, rf_message | rf_host | delete_flag); - host->update_waiting = FALSE; + update_waiting = FALSE; } /* Any return other than DEFER (that is, OK or ERROR) means that the @@ -2686,16 +4676,12 @@ for (cutoff_retry = 0; expired && case, see if any of them are deferred. */ if (rc == OK) - { - for (addr = addrlist; addr != NULL; addr = addr->next) - { + for (addr = addrlist; addr; addr = addr->next) if (addr->transport_return == DEFER) { some_deferred = TRUE; break; } - } - } /* If no addresses deferred or the result was ERROR, return. We do this for ERROR because a failing filter set-up or add_headers expansion is likely to @@ -2712,7 +4698,7 @@ for (cutoff_retry = 0; expired && case when we were trying to deliver down an existing channel and failed. Don't try any other hosts in this case. */ - if (continuing) break; + if (continue_hostname) break; /* If the whole delivery, or some individual addresses, were deferred and there are more hosts that could be tried, do not count this host towards @@ -2722,18 +4708,18 @@ for (cutoff_retry = 0; expired && important because if we don't try all hosts, the address will never time out. NOTE: this does not apply to hosts_max_try_hardlimit. */ - if ((rc == DEFER || some_deferred) && nexthost != NULL) + if ((rc == DEFER || some_deferred) && nexthost) { BOOL timedout; retry_config *retry = retry_find_config(host->name, NULL, 0, 0); - if (retry != NULL && retry->rules != NULL) + if (retry && retry->rules) { retry_rule *last_rule; for (last_rule = retry->rules; - last_rule->next != NULL; + last_rule->next; last_rule = last_rule->next); - timedout = time(NULL) - received_time > last_rule->timeout; + timedout = time(NULL) - received_time.tv_sec > last_rule->timeout; } else timedout = TRUE; /* No rule => timed out */ @@ -2746,6 +4732,38 @@ for (cutoff_retry = 0; expired && } } /* End of loop for trying multiple hosts. */ + /* If we failed to find a matching host in the list, for an already-open + connection, just close it and start over with the list. This can happen + for routing that changes from run to run, or big multi-IP sites with + round-robin DNS. */ + + if (continue_hostname && !continue_host_tried) + { + int fd = cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0; + + DEBUG(D_transport) debug_printf("no hosts match already-open connection\n"); +#ifdef SUPPORT_TLS + /* A TLS conn could be open for a cutthrough, but not for a plain continued- + transport */ +/*XXX doublecheck that! */ + + if (cutthrough.cctx.sock >= 0 && cutthrough.is_tls) + { + (void) tls_write(cutthrough.cctx.tls_ctx, US"QUIT\r\n", 6, FALSE); + tls_close(cutthrough.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT); + cutthrough.cctx.tls_ctx = NULL; + cutthrough.is_tls = FALSE; + } + else +#else + (void) write(fd, US"QUIT\r\n", 6); +#endif + (void) close(fd); + cutthrough.cctx.sock = -1; + continue_hostname = NULL; + goto retry_non_continued; + } + /* This is the end of the loop that repeats iff expired is TRUE and ob->delay_after_cutoff is FALSE. The second time round we will try those hosts that haven't been tried since the message arrived. */ @@ -2765,7 +4783,7 @@ specific failures. Force the delivery status for all addresses to FAIL. */ if (mua_wrapper) { - for (addr = addrlist; addr != NULL; addr = addr->next) + for (addr = addrlist; addr; addr = addr->next) addr->transport_return = FAIL; goto END_TRANSPORT; } @@ -2782,7 +4800,7 @@ If queue_smtp is set, or this transport was called to send a subsequent message down an existing TCP/IP connection, and something caused the host not to be found, we end up here, but can detect these cases and handle them specially. */ -for (addr = addrlist; addr != NULL; addr = addr->next) +for (addr = addrlist; addr; addr = addr->next) { /* If host is not NULL, it means that we stopped processing the host list because of hosts_max_try or hosts_max_try_hardlimit. In the former case, this @@ -2791,8 +4809,7 @@ for (addr = addrlist; addr != NULL; addr = addr->next) However, if we have hit hosts_max_try_hardlimit, we want to behave as if all hosts were tried. */ - if (host != NULL) - { + if (host) if (total_hosts_tried >= ob->hosts_max_try_hardlimit) { DEBUG(D_transport) @@ -2805,7 +4822,6 @@ for (addr = addrlist; addr != NULL; addr = addr->next) debug_printf("hosts_max_try limit caused some hosts to be skipped\n"); setflag(addr, af_retry_skipped); } - } if (queue_smtp) /* no deliveries attempted */ { @@ -2814,54 +4830,62 @@ for (addr = addrlist; addr != NULL; addr = addr->next) addr->message = US"SMTP delivery explicitly queued"; } - else if (addr->transport_return == DEFER && - (addr->basic_errno == ERRNO_UNKNOWNERROR || addr->basic_errno == 0) && - addr->message == NULL) + else if ( addr->transport_return == DEFER + && (addr->basic_errno == ERRNO_UNKNOWNERROR || addr->basic_errno == 0) + && !addr->message + ) { addr->basic_errno = ERRNO_HRETRY; - if (continue_hostname != NULL) - { + if (continue_hostname) addr->message = US"no host found for existing SMTP connection"; - } else if (expired) { setflag(addr, af_pass_message); /* This is not a security risk */ - addr->message = (ob->delay_after_cutoff)? - US"retry time not reached for any host after a long failure period" : - US"all hosts have been failing for a long time and were last tried " - "after this message arrived"; + addr->message = string_sprintf( + "all hosts%s have been failing for a long time %s", + addr->domain ? string_sprintf(" for '%s'", addr->domain) : US"", + ob->delay_after_cutoff + ? US"(and retry time not reached)" + : US"and were last tried after this message arrived"); /* If we are already using fallback hosts, or there are no fallback hosts defined, convert the result to FAIL to cause a bounce. */ - if (addr->host_list == addr->fallback_hosts || - addr->fallback_hosts == NULL) + if (addr->host_list == addr->fallback_hosts || !addr->fallback_hosts) addr->transport_return = FAIL; } else { + const char * s; if (hosts_retry == hosts_total) - addr->message = US"retry time not reached for any host"; + s = "retry time not reached for any host%s"; else if (hosts_fail == hosts_total) - addr->message = US"all host address lookups failed permanently"; + s = "all host address lookups%s failed permanently"; else if (hosts_defer == hosts_total) - addr->message = US"all host address lookups failed temporarily"; + s = "all host address lookups%s failed temporarily"; else if (hosts_serial == hosts_total) - addr->message = US"connection limit reached for all hosts"; + s = "connection limit reached for all hosts%s"; else if (hosts_fail+hosts_defer == hosts_total) - addr->message = US"all host address lookups failed"; - else addr->message = US"some host address lookups failed and retry time " - "not reached for other hosts or connection limit reached"; + s = "all host address lookups%s failed"; + else + s = "some host address lookups failed and retry time " + "not reached for other hosts or connection limit reached%s"; + + addr->message = string_sprintf(s, + addr->domain ? string_sprintf(" for '%s'", addr->domain) : US""); } } } /* Update the database which keeps information about which messages are waiting -for which hosts to become available. Each host in the list has a flag which is -set if the data is to be updated. For some message-specific errors, the flag is -turned off because we don't want follow-on deliveries in those cases. */ +for which hosts to become available. For some message-specific errors, the +update_waiting flag is turned off because we don't want follow-on deliveries in +those cases. If this transport instance is explicitly limited to one message +per connection then follow-on deliveries are not possible and there's no need +to create/update the per-transport wait- database. */ -transport_update_waiting(hostlist, tblock->name); +if (update_waiting && tblock->connection_max_messages != 1) + transport_update_waiting(hostlist, tblock->name); END_TRANSPORT: @@ -2870,4 +4894,7 @@ DEBUG(D_transport) debug_printf("Leaving %s transport\n", tblock->name); return TRUE; /* Each address has its status */ } +#endif /*!MACRO_PREDEF*/ +/* vi: aw ai sw=2 +*/ /* End of transport/smtp.c */