X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/d502442ac32f8964f6cf86469869cecb035d12c0..360c049264151071203aee2f957472321ff0dc41:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 990df6241..b6f387a1a 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -45,7 +45,7 @@ . Update the Copyright year (only) when changing content. . ///////////////////////////////////////////////////////////////////////////// -.set previousversion "4.80" +.set previousversion "4.83" .include ./local_params .set ACL "access control lists (ACLs)" @@ -5557,7 +5557,7 @@ unreachable. The next two lines are concerned with &'ident'& callbacks, as defined by RFC 1413 (hence their names): .code -rfc1413_query_hosts = * +rfc1413_hosts = * rfc1413_query_timeout = 0s .endd These settings cause Exim to avoid ident callbacks for all incoming SMTP calls. @@ -7005,7 +7005,6 @@ ${lookup dnsdb{a=one.host.com:two.host.com}} Thus, in the default case, as long as at least one of the DNS lookups yields some data, the lookup succeeds. -.new .cindex "DNSSEC" "dns lookup" Use of &(DNSSEC)& is controlled by a dnssec modifier. The possible keywords are @@ -7018,7 +7017,6 @@ is treated as equivalent to a temporary DNS error. The default is &"never"&. See also the &$lookup_dnssec_authenticated$& variable. -.wen @@ -7084,7 +7082,6 @@ With sufficiently modern LDAP libraries, Exim supports forcing TLS over regular LDAP connections, rather than the SSL-on-connect &`ldaps`&. See the &%ldap_start_tls%& option. -.new Starting with Exim 4.83, the initialization of LDAP with TLS is more tightly controlled. Every part of the TLS configuration can be configured by settings in &_exim.conf_&. Depending on the version of the client libraries installed on @@ -7094,7 +7091,6 @@ certificates. This revealed a nuance where the current UID that exim was running as could affect which config files it read. With Exim 4.83, these methods become optional, only taking effect if not specifically set in &_exim.conf_&. -.wen .section "LDAP quoting" "SECID68" @@ -7242,9 +7238,7 @@ them. The following names are recognized: &`USER `& set the DN, for authenticating the LDAP bind &`PASS `& set the password, likewise &`REFERRALS `& set the referrals parameter -.new &`SERVERS `& set alternate server list for this query only -.wen &`SIZE `& set the limit for the number of entries returned &`TIME `& set the maximum waiting time for a query .endd @@ -7266,7 +7260,6 @@ Netscape SDK; for OpenLDAP no action is taken. The TIME parameter (also a number of seconds) is passed to the server to set a server-side limit on the time taken to complete a search. -.new The SERVERS parameter allows you to specify an alternate list of ldap servers to use for an individual lookup. The global ldap_servers option provides a default list of ldap servers, and a single lookup can specify a single ldap @@ -7274,7 +7267,6 @@ server to use. But when you need to do a lookup with a list of servers that is different than the default list (maybe different order, maybe a completely different set of servers), the SERVERS parameter allows you to specify this alternate list. -.wen Here is an example of an LDAP query in an Exim lookup that uses some of these values. This is a single line, folded to fit on the page: @@ -8354,7 +8346,6 @@ Both &`+include_unknown`& and &`+ignore_unknown`& may appear in the same list. The effect of each one lasts until the next, or until the end of the list. -.new .section "Mixing wildcarded host names and addresses in host lists" &&& "SECTmixwilhos" .cindex "host list" "mixing names and addresses in" @@ -8390,7 +8381,6 @@ If the first &%accept%& fails, Exim goes on to try the second one. See chapter &`+ignore_unknown`&, which was discussed in depth in the first example in this section. .endlist -.wen .section "Temporary DNS errors when looking up host information" &&& @@ -8885,7 +8875,6 @@ the expansion result is an empty string. If the ACL returns defer the result is a forced-fail. Otherwise the expansion fails. -.new .vitem "&*${certextract{*&<&'field'&>&*}{*&<&'certificate'&>&*}&&& {*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&" .cindex "expansion" "extracting cerificate fields" @@ -8948,7 +8937,6 @@ which is one of "dns", "uri" or "mail"; if so the elenment tags are omitted. If not otherwise noted field values are presented in human-readable form. -.wen .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&& {*&<&'arg'&>&*}...}*&" @@ -9597,11 +9585,23 @@ expansion item above. {*&<&'string2'&>&*}}*&" .cindex "expansion" "running a command" .cindex "&%run%& expansion item" -The command and its arguments are first expanded separately, and then the -command is run in a separate process, but under the same uid and gid. As in -other command executions from Exim, a shell is not used by default. If you want +The command and its arguments are first expanded as one string. The string is +split apart into individual arguments by spaces, and then the command is run +in a separate process, but under the same uid and gid. As in other command +executions from Exim, a shell is not used by default. If the command requires a shell, you must explicitly code it. +Since the arguments are split by spaces, when there is a variable expansion +which has an empty result, it will cause the situation that the argument will +simply be omitted when the program is actually executed by Exim. If the +script/program requires a specific number of arguments and the expanded +variable could possibly result in this empty expansion, the variable must be +quoted. This is more difficult if the expanded variable itself could result +in a string containing quotes, because it would interfere with the quotes +around the command arguments. A possible guard against this is to wrap the +variable in the &%sg%& operator to change any quote marks to some other +character. + The standard input for the command exists, but is empty. The standard output and standard error are set to the same file descriptor. .cindex "return code" "from &%run%& expansion" @@ -10997,6 +10997,13 @@ precedes the expansion of the string. For example, the commands available in Exim filter files include an &%if%& command with its own regular expression matching condition. +.new +.vitem "&$acl_arg1$&, &$acl_arg2$&, etc" +Within an acl condition, expansion condition or expansion item +any arguments are copied to these variables, +any unused variables being made empty. +.wen + .vitem "&$acl_c...$&" Values can be placed in these variables by the &%set%& modifier in an ACL. They can be given any name that starts with &$acl_c$& and is at least six characters @@ -11018,6 +11025,12 @@ message is received, the values of these variables are saved with the message, and can be accessed by filters, routers, and transports during subsequent delivery. +.new +.vitem &$acl_narg$& +Within an acl condition, expansion condition or expansion item +this variable has the number of arguments. +.wen + .vitem &$acl_verify_message$& .vindex "&$acl_verify_message$&" After an address verification has failed, this variable contains the failure @@ -11556,7 +11569,6 @@ ability to find the amount of free space (only true for experimental systems), the space value is -1. See also the &%check_log_space%& option. -.new .vitem &$lookup_dnssec_authenticated$& .vindex "&$lookup_dnssec_authenticated$&" This variable is set after a DNS lookup done by @@ -11564,7 +11576,6 @@ a dnsdb lookup expansion, dnslookup router or smtp transport. It will be empty if &(DNSSEC)& was not requested, &"no"& if the result was not labelled as authenticated data and &"yes"& if it was. -.wen .vitem &$mailstore_basename$& .vindex "&$mailstore_basename$&" @@ -12103,7 +12114,8 @@ received. It is empty if there was no successful authentication. See also .vitem &$sender_host_dnssec$& .vindex "&$sender_host_dnssec$&" -If &$sender_host_name$& has been populated (by reference, &%hosts_lookup%& or +If an attempt to populate &$sender_host_name$& has been made +(by reference, &%hosts_lookup%& or otherwise) then this boolean will have been set true if, and only if, the resolver library states that the reverse DNS was authenticated data. At all other times, this variable is false. @@ -12342,7 +12354,6 @@ on an outbound SMTP connection; the meaning of this depends upon the TLS implementation used. If TLS has not been negotiated, the value will be 0. -.new .vitem &$tls_in_ourcert$& .vindex "&$tls_in_ourcert$&" This variable refers to the certificate presented to the peer of an @@ -12350,9 +12361,7 @@ inbound connection when the message was received. It is only useful as the argument of a &%certextract%& expansion item, &%md5%& or &%sha1%& operator, or a &%def%& condition. -.wen -.new .vitem &$tls_in_peercert$& .vindex "&$tls_in_peercert$&" This variable refers to the certificate presented by the peer of an @@ -12360,25 +12369,20 @@ inbound connection when the message was received. It is only useful as the argument of a &%certextract%& expansion item, &%md5%& or &%sha1%& operator, or a &%def%& condition. -.wen -.new .vitem &$tls_out_ourcert$& .vindex "&$tls_out_ourcert$&" This variable refers to the certificate presented to the peer of an outbound connection. It is only useful as the argument of a &%certextract%& expansion item, &%md5%& or &%sha1%& operator, or a &%def%& condition. -.wen -.new .vitem &$tls_out_peercert$& .vindex "&$tls_out_peercert$&" This variable refers to the certificate presented by the peer of an outbound connection. It is only useful as the argument of a &%certextract%& expansion item, &%md5%& or &%sha1%& operator, or a &%def%& condition. -.wen .vitem &$tls_in_certificate_verified$& .vindex "&$tls_in_certificate_verified$&" @@ -12723,8 +12727,9 @@ option), the interfaces and ports on which it listens are controlled by the following options: .ilist -&%daemon_smtp_ports%& contains a list of default ports. (For backward -compatibility, this option can also be specified in the singular.) +&%daemon_smtp_ports%& contains a list of default ports +or service names. +(For backward compatibility, this option can also be specified in the singular.) .next &%local_interfaces%& contains list of interface IP addresses on which to listen. Each item may optionally also specify a port. @@ -12825,7 +12830,8 @@ value of &%daemon_smtp_ports%& is no longer relevant in this example.) Exim supports the obsolete SSMTP protocol (also known as SMTPS) that was used before the STARTTLS command was standardized for SMTP. Some legacy clients still use this protocol. If the &%tls_on_connect_ports%& option is set to a -list of port numbers, connections to those ports must use SSMTP. The most +list of port numbers or service names, +connections to those ports must use SSMTP. The most common use of this option is expected to be .code tls_on_connect_ports = 465 @@ -17834,7 +17840,6 @@ when there is a DNS lookup error. -.new .option dnssec_request_domains dnslookup "domain list&!!" unset .cindex "MX record" "security" .cindex "DNSSEC" "MX lookup" @@ -17843,11 +17848,9 @@ when there is a DNS lookup error. DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. This applies to all of the SRV, MX A6, AAAA, A lookup sequence. -.wen -.new .option dnssec_require_domains dnslookup "domain list&!!" unset .cindex "MX record" "security" .cindex "DNSSEC" "MX lookup" @@ -17857,7 +17860,6 @@ DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. Any returns not having the Authenticated Data bit (AD bit) set wil be ignored and logged as a host-lookup failure. This applies to all of the SRV, MX A6, AAAA, A lookup sequence. -.wen @@ -22764,7 +22766,6 @@ See the &%search_parents%& option in chapter &<>& for more details. -.new .option dnssec_request_domains smtp "domain list&!!" unset .cindex "MX record" "security" .cindex "DNSSEC" "MX lookup" @@ -22773,11 +22774,9 @@ details. DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. This applies to all of the SRV, MX A6, AAAA, A lookup sequence. -.wen -.new .option dnssec_require_domains smtp "domain list&!!" unset .cindex "MX record" "security" .cindex "DNSSEC" "MX lookup" @@ -22787,7 +22786,6 @@ DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. Any returns not having the Authenticated Data bit (AD bit) set wil be ignored and logged as a host-lookup failure. This applies to all of the SRV, MX A6, AAAA, A lookup sequence. -.wen @@ -28414,7 +28412,6 @@ This condition checks whether the sending host (the client) is authorized to send email. Details of how this works are given in section &<>&. -.new .vitem &*verify&~=&~header_names_ascii*& .cindex "&%verify%& ACL condition" .cindex "&ACL;" "verifying header names only ASCII" @@ -28429,7 +28426,6 @@ allowable characters are decimal ASCII values 33 through 126. Exim itself will handle headers with non-ASCII characters, but it can cause problems for downstream applications, so this option will allow their detection and rejection in the DATA ACL's. -.wen .vitem &*verify&~=&~header_sender/*&<&'options'&> .cindex "&%verify%& ACL condition" @@ -35043,10 +35039,8 @@ or (in case &*-a*& switch is specified) .code exim -bp .endd -.new The &*-C*& option is used to specify an alternate &_exim.conf_& which might contain alternate exim configuration the queue management might be using. -.wen to obtain a queue listing, and then greps the output to select messages that match given criteria. The following selection options are available: