X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/d20976dcb3ce18e398bf9b8bd8171fc67fa7aada..0806a9c5bfe809d616ae63fa68e959a2fac2a864:/doc/doc-txt/NewStuff diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 2df222c99..fa86b1e07 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,179 +1,257 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.38 2005/04/28 13:29:27 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/NewStuff,v 1.146 2007/04/17 13:06:10 ph10 Exp $ New Features in Exim -------------------- -This file contains descriptions of new features that have been added to Exim, -but have not yet made it into the main manual (which is most conveniently -updated when there is a relatively large batch of changes). The doc/ChangeLog -file contains a listing of all changes, including bug fixes. +This file contains descriptions of new features that have been added to Exim. +Before a formal release, there may be quite a lot of detail so that people can +test from the snapshots or the CVS before the documentation is updated. Once +the documentation is updated, this file is reduced to a short list. +Version 4.67 +------------ + + 1. There is a new log selector called smtp_no_mail, which is not included in + the default setting. When it is set, a line is written to the main log + whenever an accepted SMTP connection terminates without having issued a + MAIL command. + + 2. When an item in a dnslists list is followed by = and & and a list of IP + addresses, the behaviour was not clear when the lookup returned more than + one IP address. This has been solved by the addition of == and =& for "all" + rather than the defaule "any" matching. + + 3. Up till now, the only control over which cipher suites GnuTLS uses has been + for the cipher algorithms. New options have been added to allow some of the + other parameters to be varied. + + 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is + set, Exim compiles a runtime option called disable_fsync. + + 5. There is a new variable called $smtp_count_at_connection_start. + + 6. There's a new control called no_pipelining. + + 7. There are two new variables called $sending_ip_address and $sending_port. + These are set whenever an SMTP connection to another host has been set up. + + 8. The expansion of the helo_data option in the smtp transport now happens + after the connection to the server has been made. + + 9. There is a new expansion operator ${rfc2047d: that decodes strings that + are encoded as per RFC 2047. + +10. There is a new log selector called "pid", which causes the current process + id to be added to every log line, in square brackets, immediately after the + time and date. + +11. Exim has been modified so that it flushes SMTP output before implementing + a delay in an ACL. It also flushes the output before performing a callout, + as this can take a substantial time. These behaviours can be disabled by + obeying control = no_delay_flush or control = no_callout_flush, + respectively, at some earlier stage of the connection. + +12. There are two new expansion conditions that iterate over a list. They are + called forany and forall. + +13. There's a new global option called dsn_from that can be used to vary the + contents of From: lines in bounces and other automatically generated + messages ("delivery status notifications" - hence the name of the option). + +14. The smtp transport has a new option called hosts_avoid_pipelining. + +15. By default, exigrep does case-insensitive matches. There is now a -I option + that makes it case-sensitive. + +16. A number of new features ("addresses", "map", "filter", and "reduce") have + been added to string expansions to make it easier to process lists of + items, typically addresses. + +17. There's a new ACL modifier called "continue". It does nothing of itself, + and processing of the ACL always continues with the next condition or + modifier. It is provided so that the side effects of expanding its argument + can be used. + +18. It is now possible to use newline and other control characters (those with + values less than 32, plus DEL) as separators in lists. + +19. The exigrep utility now has a -v option, which inverts the matching + condition. -Version 4.51 +20. The host_find_failed option in the manualroute router can now be set to + "ignore". + + +Version 4.66 +------------ + +No new features were added to 4.66. + + +Version 4.65 ------------ -PH/01 The format in which GnuTLS parameters are written to the gnutls-param - file in the spool directory has been changed. This change has been made - to alleviate problems that some people had with the generation of the - parameters by Exim when /dev/random was exhausted. In this situation, - Exim would hang until /dev/random acquired some more entropy. +No new features were added to 4.65. - The new code exports and imports the DH and RSA parameters in PEM - format. This means that the parameters can be generated externally using - the certtool command that is part of GnuTLS. - To replace the parameters with new ones, instead of deleting the file - and letting Exim re-create it, you can generate new parameters using - certtool and, when this has been done, replace Exim's cache file by - renaming. The relevant commands are something like this: +Version 4.64 +------------ - # rm -f new.params - # touch new.params - # chown exim:exim new.params - # chmod 0400 new.params - # certtool --generate-privkey --bits 512 >new.params - # echo "" >>new.params - # certtool --generate-dh-params --bits 1024 >> new.params - # mv new.params params + 1. ACL variables can now be given arbitrary names, as long as they start with + "acl_c" or "acl_m" (for connection variables and message variables), are at + least six characters long, with the sixth character being either a digit or + an underscore. - If Exim never has to generate the parameters itself, the possibility of - stalling is removed. + 2. There is a new ACL modifier called log_reject_target. It makes it possible + to specify which logs are used for messages about ACL rejections. -PH/02 A new expansion item for dynamically loading and calling a locally- - written C function is now provided, if Exim is compiled with + 3. There is a new authenticator called "dovecot". This is an interface to the + authentication facility of the Dovecot POP/IMAP server, which can support a + number of authentication methods. - EXPAND_DLFUNC=yes + 4. The variable $message_headers_raw provides a concatenation of all the + messages's headers without any decoding. This is in contrast to + $message_headers, which does RFC2047 decoding on the header contents. - set in Local/Makefile. The facility is not included by default (a - suitable error is given if you try to use it when it is not there.) + 5. In a DNS black list, if two domain names, comma-separated, are given, the + second is used first to do an initial check, making use of any IP value + restrictions that are set. If there is a match, the first domain is used, + without any IP value restrictions, to get the TXT record. - If you enable EXPAND_DLFUNC, you should also be aware of the new redirect - router option forbid_filter_dlfunc. If you have unprivileged users on - your system who are permitted to create filter files, you might want to - set forbid_filter_dlfunc=true in the appropriate router, to stop them - using ${dlfunc to run code within Exim. + 6. All authenticators now have a server_condition option. - You load and call an external function like this: - - ${dlfunc{/some/file}{function}{arg1}{arg2}...} - - Once loaded, Exim remembers the dynamically loaded object so that it - doesn't reload the same object file in the same Exim process (but of - course Exim does start new processes frequently). - - There may be from zero to eight arguments to the function. When compiling - a local function that is to be called in this way, local_scan.h should be - included. The Exim variables and functions that are defined by that API - are also available for dynamically loaded functions. The function itself - must have the following type: - - int dlfunction(uschar **yield, int argc, uschar *argv[]) - - Where "uschar" is a typedef for "unsigned char" in local_scan.h. The - function should return one of the following values: + 7. There is a new command-line option called -Mset. It is useful only in + conjunction with -be (that is, when testing string expansions). It must be + followed by a message id; Exim loads the given message from its spool + before doing the expansions. - OK Success. The string that is placed in "yield" is put into - the expanded string that is being built. + 8. Another similar new command-line option is called -bem. It operates like + -be except that it must be followed by the name of a file that contains a + message. - FAIL A non-forced expansion failure occurs, with the error - message taken from "yield", if it is set. + 9. When an address is delayed because of a 4xx response to a RCPT command, it + is now the combination of sender and recipient that is delayed in + subsequent queue runs until its retry time is reached. - FAIL_FORCED A forced expansion failure occurs, with the error message - taken from "yield" if it is set. +10. Unary negation and the bitwise logical operators and, or, xor, not, and + shift, have been added to the eval: and eval10: expansion items. - ERROR Same as FAIL, except that a panic log entry is written. +11. The variables $interface_address and $interface_port have been renamed + as $received_ip_address and $received_port, to make it clear that they + relate to message reception rather than delivery. (The old names remain + available for compatibility.) - When compiling a function that is to be used in this way with gcc, - you need to add -shared to the gcc command. Also, in the Exim build-time - configuration, you must add -export-dynamic to EXTRALIBS. +12. The "message" modifier can now be used on "accept" and "discard" acl verbs + to vary the message that is sent when an SMTP command is accepted. -TF/01 $received_time is a new expansion variable containing the time and date - as a number of seconds since the start of the Unix epoch when the - current message was received. -PH/03 There is a new value for RADIUS_LIB_TYPE that can be set in - Local/Makefile. It is RADIUSCLIENTNEW, and it requests that the new API, - in use from radiusclient 0.4.0 onwards, be used. It does not appear to be - possible to detect the different versions automatically. +Version 4.63 +------------ -PH/04 There is a new option called acl_not_smtp_mime that allows you to scan - MIME parts in non-SMTP messages. It operates in exactly the same way as - acl_smtp_mime +1. There is a new Boolean option called filter_prepend_home for the redirect + router. + +2. There is a new acl, set by acl_not_smtp_start, which is run right at the + start of receiving a non-SMTP message, before any of the message has been + read. + +3. When an SMTP error message is specified in a "message" modifier in an ACL, + or in a :fail: or :defer: message in a redirect router, Exim now checks the + start of the message for an SMTP error code. + +4. There is a new parameter for LDAP lookups called "referrals", which takes + one of the settings "follow" (the default) or "nofollow". + +5. Version 20070721.2 of exipick now included, offering these new options: + --reverse + After all other sorting options have bee processed, reverse order + before displaying messages (-R is synonym). + --random + Randomize order of matching messages before displaying. + --size + Instead of displaying the matching messages, display the sum + of their sizes. + --sort [,...] + Before displaying matching messages, sort the messages according to + each messages value for each variable. + --not + Negate the value for every test (returns inverse output from the + same criteria without --not). + + +Version 4.62 +------------ -PH/05 It is now possible to redefine a macro within the configuration file. - The macro must have been previously defined within the configuration (or - an included file). A definition on the command line using the -D option - causes all definitions and redefinitions within the file to be ignored. - In other words, -D overrides any values that are set in the file. - Redefinition is specified by using '==' instead of '='. For example: +1. The ${readsocket expansion item now supports Internet domain sockets as well + as Unix domain sockets. If the first argument begins "inet:", it must be of + the form "inet:host:port". The port is mandatory; it may be a number or the + name of a TCP port in /etc/services. The host may be a name, or it may be an + IP address. An ip address may optionally be enclosed in square brackets. + This is best for IPv6 addresses. For example: - MAC1 = initial value - ... - MAC1 == updated value + ${readsocket{inet:[::1]:1234}{}... - Redefinition does not alter the order in which the macros are applied to - the subsequent lines of the configuration file. It is still the same - order in which the macros were originally defined. All that changes is - the macro's value. Redefinition makes it possible to accumulate values. - For example: + Only a single host name may be given, but if looking it up yield more than + one IP address, they are each tried in turn until a connection is made. Once + a connection has been made, the behaviour is as for ${readsocket with a Unix + domain socket. - MAC1 = initial value - ... - MAC1 == MAC1 and something added +2. If a redirect router sets up file or pipe deliveries for more than one + incoming address, and the relevant transport has batch_max set greater than + one, a batch delivery now occurs. - This can be helpful in situations where the configuration file is built - from a number of other files. +3. The appendfile transport has a new option called maildirfolder_create_regex. + Its value is a regular expression. For a maildir delivery, this is matched + against the maildir directory; if it matches, Exim ensures that a + maildirfolder file is created alongside the new, cur, and tmp directories. -PH/06 Macros may now be defined or redefined between router, transport, - authenticator, or ACL definitions, as well as in the main part of the - configuration. They may not, however, be changed within an individual - driver or ACL, or in the local_scan, retry, or rewrite sections of the - configuration. -PH/07 $acl_verify_message is now set immediately after the failure of a - verification in an ACL, and so is available in subsequent modifiers. In - particular, the message can be preserved by coding like this: +Version 4.61 +------------ - warn !verify = sender - set acl_m0 = $acl_verify_message +The documentation is up-to-date for the 4.61 release. Major new features since +the 4.60 release are: - Previously, $acl_verify_message was set only while expanding "message" - and "log_message" when a very denied access. +. An option called disable_ipv6, to disable the use of IPv6 completely. -PH/08 The redirect router has two new options, sieve_useraddress and - sieve_subaddress. These are passed to a Sieve filter to specify the :user - and :subaddress parts of an address. Both options are unset by default. - However, when a Sieve filter is run, if sieve_useraddress is unset, the - entire original local part (including any prefix or suffix) is used for - :user. An unset subaddress is treated as an empty subaddress. +. An increase in the number of ACL variables to 20 of each type. -PH/09 Quota values can be followed by G as well as K and M. +. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1, + $2, $3, (though those are still set) because the numeric variables get used + for other things in complicated expansions. -PH/10 $message_linecount is a new variable that contains the total number of - lines in the header and body of the message. Compare $body_linecount, - which is the count for the body only. During the DATA and - content-scanning ACLs, $message_linecount contains the number of lines - received. Before delivery happens (that is, before filters, routers, and - transports run) the count is increased to include the Received: header - line that Exim standardly adds, and also any other header lines that are - added by ACLs. The blank line that separates the message header from the - body is not counted. Here is an example of the use of this variable in a - DATA ACL: +. The default for rfc1413_query_timeout has been changed from 30s to 5s. - deny message = Too many lines in message header - condition = \ - ${if <{250}{${eval: $message_linecount - $body_linecount}}} +. It is possible to use setclassresources() on some BSD OS to control the + resources used in pipe deliveries. - In the MAIL and RCPT ACLs, the value is zero because at that stage the - message has not yet been received. +. A new ACL modifier called add_header, which can be used with any verb. -PH/11 In a ${run expansion, the variable $value (which contains the standard - output) is now also usable in the "else" string. +. More errors are detectable in retry rules. +There are a number of other additions too. -Version 4.50 + +Version 4.60 ------------ -The documentation is up-to-date for the 4.50 release. +The documentation is up-to-date for the 4.60 release. Major new features since +the 4.50 release are: + +. Support for SQLite. + +. Support for IGNOREQUOTA in LMTP. + +. Extensions to the "submission mode" features. + +. Support for Client SMTP Authorization (CSA). + +. Support for ratelimiting hosts and users. + +. New expansion items to help with the BATV "prvs" scheme. + +. A "match_ip" condition, that matches an IP address against a list. + +There are many more minor changes. ****