X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/d1139f18482c3d4847e5bb6bf5619f61e03e8c31..0df394b5d5e6865094f601baf2a71f41d1d3ad95:/test/README diff --git a/test/README b/test/README index f63c97fa4..485ce290d 100644 --- a/test/README +++ b/test/README @@ -3,8 +3,8 @@ EXPORTABLE EXIM TEST SUITE This document last updated for: -Test Suite Version: 4.67 -Date: 20 February 2007 +Test Suite Version: 4.87 +Date: 30 January 2016 BACKGROUND @@ -73,12 +73,13 @@ In order to run this test suite, the following requirements must be met: Defaults:exim-build timestamp_timeout=480,!tty_tickets -(3) The login under which you run the tests must be in the exim group so that - it has access to logs, spool files, etc. The login should not be one of the - names "userx", "usery", "userz", or a few other simple ones such as "abcd" - and "xyz" and single letters that are used in the tests. The test suite - expects the login to have a gecos name; I think it will now run if the - gecos field is empty but there may be anomalies. +(3) The login under which you run the tests must have the exim group as a + secondary so that it has access to logs, spool files, etc. However, it + should have a different primary group (eg. "users" vs. "eximgroup"). The + login should not be one of the names "userx", "usery", "userz", or a few + other simple ones such as "abcd" and "xyz" and single letters that are used + in the tests. The test suite expects the login to have a gecos name; I think + it will now run if the gecos field is empty but there may be anomalies. The login must not contain a dash or an equal sign. (Otherwise some tests about local_from_{suffix,prefix} will fail.) @@ -120,11 +121,12 @@ In order to run this test suite, the following requirements must be met: configs can be placed into it. A suitable file location is .../exim/test/trusted_configs with content .../exim/test/test-config [fill out the ... to make full paths]. This file should be owner/group matching CONFIGURE_OWNER/GROUP, - or root/root. The config files in .../exim/test/confs/ should be owner/group the same. - DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it + or root/root, and it has to be accessible for the login, under which + you run the tests. The config files in .../exim/test/confs/ should be + owner/group the same. DISABLE_D_OPTION must not be used. If ALT_CONFIG_PREFIX is used, it must contain the directory of the test-suite. WHITELIST_D_MACROS should contain: - - DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:LS:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:RT:S:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STD:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF:X:Y + + DIR:EXIM_PATH:AA:ACL:ACLRCPT:ACL_MAIL:ACL_PREDATA:ACL_RCPT:AFFIX:ALLOW:ARG1:ARG2:AUTHF:AUTHS:AUTH_ID_DOMAIN:BAD:BANNER:BB:BR:BRB:CERT:COM:COMMAND_USER:CONNECTCOND:CONTROL:CREQCIP:CREQMAC:CRL:CSS:D6:DATA:DCF:DDF:DEFAULTDWC:DELAY:DETAILS:DRATELIMIT:DYNAMIC_OPTION:ELI:ERROR_DETAILS:ERT:FAKE:FALLBACK:FILTER:FILTER_PREPEND_HOME:FORBID:FORBID_SMTP_CODE:FUSER:HAI:HAP:HARDLIMIT:HEADER_LINE_MAXSIZE:HEADER_MAXSIZE:HELO_MSG:HL:HOSTS:HOSTS_AVOID_TLS:HOSTS_MAX_TRY:HVH:IFACE:IGNORE_QUOTA:INC:INSERT:IP1:IP2:LAST:LDAPSERVERS:LENCHECK:LIMIT:LIST:LOG_SELECTOR:MAXNM:MESSAGE_LOGS:MSIZE:NOTDAEMON:ONCE:ONLY:OPT:OPTION:ORDER:PAH:PEX:PORT:PTBC:QDG:QOLL:QUOTA:QUOTA_FILECOUNT:QWM:RCPT_MSG:REMEMBER:REQUIRE:RETRY:RETRY1:RETRY2:RETURN:RETURN_ERROR_DETAILS:REWRITE:ROUTE_DATA:RRATELIMIT:SELECTOR:SELF:SERVER:SERVERS:SREQCIP:SREQMAC:SRV:STRICT:SUB:SUBMISSION_OPTIONS:TIMEOUTDEFER:TIMES:TRUSTED:TRYCLEAR:UL:USE_SENDER:UTF8:VALUE:WMF (10) Exim must *not* be built with USE_READLINE, as the test-suite's automation assumes the simpler I/O model. @@ -213,10 +215,12 @@ THE RUNTEST SCRIPT ------------------ If you do not supply any arguments to ./runtest, it searches for an Exim -source tree at the same level as the test suite directory. It then looks for an -Exim binary in a "build" directory of that source tree. If there are several -Exim source trees, it chooses the latest version of Exim. Consider the -following example: +source tree at the same level as the test suite directory. A source tree +is a source tree, if it contains a build-* directory. + +It then looks for an Exim binary in a "build" directory of that source +tree. If there are several Exim source trees, it chooses the latest +version of Exim. Consider the following example: $ ls -F /source/exim exim-4.60/ exim-4.62/ exim-testsuite-x.xx/ @@ -260,6 +264,17 @@ There are some options for the ./runtest script itself: (If it turns out that most people prefer to use diff, I'll change the default.) + -FLAVOR + -FLAVOUR + This allows "overrides" for the test results. It's intended + use is to deal with distro specific differences in the test + output. The default flavour is "foo". If during the test + run differences between the current and the expected output + are found and no flavour file exists already, you may update + the "common" expected output or you may create a flavour + file. If a flavour file already exists, any updates will go + into that flavour file! + -KEEP Normally, after a successful run, the test output files are deleted. This option prevents this. It is useful when running a single test, in order to look at the actual output before it is @@ -536,6 +551,7 @@ here: PORT_D is replaced by a port number for normal daemon use PORT_N is replaced by a port number that should never respond PORT_S is replaced by a port number for normal bin/server use + PORT_DYNAMIC is replaced by a port number allocated dynamically TESTNUM is replaced by the current test number V4NET is replaced by an IPv4 network number for testing V6NET is replaced by an IPv6 network number for testing @@ -546,6 +562,10 @@ testing purposes, and for testing Exim with -bh. The only requirement is that they are networks that can never be used for an IP address of a real host. I've chosen two multicast networks for the moment. +PORT_DYNAMIC is allocated by hunting for a free port (starting at port +1024) a listener can bind to. This is done by runtest, for simulating +inetd operations. + If the host has no IPv6 address, "" is substituted but that does not matter because no IPv6 tests will be run. A similar substitution is made if there is no IPv4 address, and again, tests that actually require a @@ -827,6 +847,12 @@ terminated by four asterisks. Even if no data is required for the particular usage, the asterisks must be given. + background + +This command takes one script line and runs it in the background, +in parallel with following commands. For external daemons, eg. redis-server. + + catwrite [nxm[=start-of-line-text]]* This command operates like the "write" command, which is described below, @@ -908,7 +934,9 @@ input, details of which are given below. A number of options are implemented: -d causes the server to output debugging information -t sets a timeout (default 5) for when the server is - awaiting an incoming connection + awaiting an incoming connection. If negative, the + absolute value is used and a timeout results in a + nonfailure exit code -noipv4 causes the server not to set up an IPv4 socket @@ -998,7 +1026,7 @@ Lines in client scripts are of two kinds: Here is a simple example: client 127.0.0.1 PORT_D - ??? 250 + ??? 220 EHLO xxx ??? 250- ??? 250 @@ -1144,9 +1172,6 @@ fake zone files. These are: data block. The addresses that are generated are in the 10.250.0.0/16 network. -The domain names that are handled directly by Exim, without being passed to -fakens, are: - test.again.dns This always provokes a TRY_AGAIN response, for testing the handling of temporary DNS error. If the full domain name starts with digits, a delay of that many seconds occurs. @@ -1154,10 +1179,6 @@ fakens, are: test.fail.dns This always provokes a NO_RECOVERY response, for testing DNS server failures. -This special handling could now be done in the fakens program, but while the -old test suite is still being used it has to be done in Exim itself, so for the -moment it remains there. - The use of gethostbyname() and its IPv6 friends is also subverted when Exim is running in the test harness. The test code handles a few special names directly; for all the others it uses DNS lookups, which are then handled as