X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/bd8aa2d172edfb841402caf8c2524628505df8ea..4f5788623ab3e8456ad254883b6cc018079aab96:/doc/doc-txt/NewStuff diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index 8338b2371..435769f78 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -1,4 +1,4 @@ -$Cambridge: exim/doc/doc-txt/NewStuff,v 1.97 2006/03/16 11:51:09 ph10 Exp $ +$Cambridge: exim/doc/doc-txt/NewStuff,v 1.98 2006/04/04 14:03:50 ph10 Exp $ New Features in Exim -------------------- @@ -11,187 +11,27 @@ file contains a listing of all changes, including bug fixes. Version 4.61 ------------ -PH/01 There is a new global option called disable_ipv6, which does exactly what - its name implies. If set true, even if the Exim binary has IPv6 support, - no IPv6 activities take place. AAAA records are never looked up for host - names given in manual routing data or elsewhere. AAAA records that are - received from the DNS as additional data for MX records are ignored. Any - IPv6 addresses that are listed in local_interfaces, manualroute route - data, etc. are also ignored. If IP literals are enabled, the ipliteral - router declines to handle IPv6 literal addresses. - -PH/02 There are now 20 of each type of ACL variable by default (instead of 10). - It is also possible to change the numbers by setting ACL_CVARS and/or - ACL_MVARS in Local/Makefile. Backward compatibility is maintained if you - upgrade to this release with existing messages containing ACL variable - settings on the queue. However, going in the other direction - (downgrading) will not be compatible; the values of ACL variables will be - lost. - -PH/03 If quota_warn_message contains a From: header, Exim now refrains from - adding the default one. Similarly, if it contains a Reply-To: header, the - errors_reply_to option, if set, is not used. - -PH/04 The variables $auth1, $auth2, $auth3 are now available in authenticators, - containing the same values as $1, $2, $3. The new variables are provided - because the numerical variables can be reset during string expansions - (for example, during a "match" operation) and so may lose the - authentication data. The preferred variables are now the new ones, with - the use of the numerical ones being deprecated, though the support will - not be removed, at least, not for a long time. - -PH/05 The "control=freeze" ACL modifier can now be followed by /no_tell. If - the global option freeze_tell is set, it is ignored for the current - message (that is, nobody is told about the freezing), provided all the - "control=freeze" modifiers that are obeyed in the current message have - the /no_tell option. - -PH/06 In both GnuTLS and OpenSSL, an expansion of tls_privatekey that results - in an empty string is now treated as unset. - -PH/07 There is a new log selector called sender_verify_fail, which is set by - default. If it is unset, the separate log line that gives details of a - sender verification failure is not written. Log lines for the rejection - of SMTP commands (e.g. RCPT) contain just "sender verify failed", so some - detail is lost. - -PH/08 The default for dns_check_names_pattern now allows slashes within names, - as there are now some PTR records that contain slashes. This check is - only to protect against broken name servers that fall over on strange - characters, so the fact that it applies to all lookups doesn't matter. - -PH/09 The default for rfc4131_query_timeout has been changed from 30s to 5s. - -PH/10 When compiled on FreeBSD, NetBSD, or BSD/OS, the pipe transport has a new - Boolean option called use_classresources, defaulting false. If it is set - true, the setclassresources() function is used to set resource limits - when a pipe transport is run to perform a delivery. The limits for the - uid under which the pipe is to run are obtained from the login class - database. - -PH/11 If retry_interval_max is set greater than 24 hours, it is quietly reset - to 24 hours. This avoids potential overflow problems when processing G - and H retry rules, and it seems reasonable to require a retry at least - once a day. - -PH/12 When the plaintext authenticator is running as a client, the server - challenges are now checked to ensure they are valid base64 strings. The - default action on failure is to abort the authentication. However, if - client_ignore_invalid_base64 is set true, invalid responses are ignored. - -PH/13 When the plaintext authenticator is running as a client, the challenges - from the server are placed in $auth1, $auth2, etc. as they are received. - Thus, the challege that is received in response to sending the first - string (with the AUTH command) can be used in the expansion of the second - string, and so on. Currently, up to 3 challenge strings are available in - this way. If an invalid base64 string is received when client_ignore_ - invalid_base64 is set, an empty string is put in the $auth variable. - -PH/14 Messages created by the autoreply transport now contain a References: - header. This is constructed in accordance with rules that are described - in section 3.64 of RFC 2822, which states that replies should contain - such a header line, and section 3.14 of RFC 3834, which states that - automatic responses are not different in this respect. However, because - some mail processing software does not cope well with very long header - lines, no more than 12 message IDs are copied from the References: header - line in the incoming message. If there are more than 12, the first one - and then the final 11 are copied, before adding the message ID of the - incoming message. - -PH/15 The smtp transport has a new option called authenticated_sender_force. - When set true, it allows the authenticated_sender option's value to be - used, even if Exim has not authenticated as a client. - -PH/16 The expansion ${time_eval:} converts an Exim time string such as - 2d4h1m into a number of seconds. - -PH/17 The ACL modifier control=allow_auth_unadvertised can be used to permit a - client host to use the SMTP AUTH command even when it has not been - advertised in response to EHLO. Furthermore, because there are apparently - some really broken clients that do this, Exim will even accept AUTH after - HELO when this control is set. It should only be used if you really need - it, and you should limit its use to those broken hosts that do not work - without it. For example: - - warn hosts = 192.168.34.25 - control = allow_auth_unadvertised - - This control is permitted only in the connection and HELO ACLs. - -PH/18 There is a new ACL modifier called "add_header" which does what its name - implies. It specifies one of more header lines that are to be added to an - incoming message, assuming, of course, that the message is ultimately - accepted. - - This modifier is permitted in the MAIL, RCPT, PREDATA, DATA, MIME, and - non-SMTP ACLs (in other words, those that are concerned with accepting a - message). Added header lines are accumulated during the MAIL, RCPT, and - PREDATA ACLs, with any duplicates being discarded. They are then added to - the message before processing the DATA and MIME ACLs, during which - further added header lines are accumulated, again with duplicates - discarded. Thus, it is possible to add two identical header lines to an - SMTP message, but only if one is added before DATA and one after. - - In the case of non-SMTP messages, new headers are accumulated during the - non-SMTP ACL, and added to the message at the end. - - The add_header modifier is available for use with all ACL verbs. In the - case of the WARN verb, add_header supersedes the use of "message" for - this purpose; for the other verbs, it provides a new facility. If both - add_header and "message" are present on a WARN verb, both are processed - according to their specifications. - - The add_header modifier acts immediately it is encountered during the - processing of an ACL. This is different to the (now-deprecated) use of - "message" on a WARN verb, where the action is taken only if all the - conditions are true. Notice the difference between these two cases on a - RCPT ACL: - - deny add_header = ADDED: some text - - - deny - add_header = ADDED: some text - - In the first case, the header is always added, whether or not the current - recipient is rejected. In the second case, the header is added only if - the recipient is rejected. - - If add_header appears more than once on an ACL statement, multiple - headers are added, provided that they have different content. (In the - case of WARN with "message", only the last value of "message" is used.) - - The facility for specifying where the new header is to be inserted, as - described for WARN with "message" in section 39.19 of the 4.60 manual, is - supported. - -PH/19 The following errors can now be detected in retry rules: - - mail_4xx This is like rcpt_4xx, but applies to MAIL commands - - data_4xx This is like rcpt_4xx, but applies to DATA commands and the - response code after the end of the data - - lost_connection This error occurs when the server unexpectedly closes - the SMTP connection. There may, of course, legitmate reasons - for this (host died, network died), but if it repeats a lot - for the same host, it indicates something odd. - - tls_required The server was required to use TLS (hosts_require_tls), - but either did not offer it, or responded with 4xx to - STARTTLS, or there was a problem setting up the TLS connection - - Note that a 5xx response to STARTTLS is a permanent error. - -PH/20 There are now two options for the exicyclog script: - - -k specifies the number of old logs to keep, overriding the - default that is set when Exim is built. - - -l specifies the log file path, in the same format as the - log_file_path option (e.g. /var/log/exim_%slog), again, - overriding the script's default - which is to find the setting - from Exim's configuration. +The documentation is up-to-date for the 4.61 release. Major new features since +the 4.60 release are: + +. An option called disable_ipv6, to disable the use of IPv6 completely. + +. An increase in the number of ACL variables to 20 of each type. + +. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1, + $2, $3, (though those are still set) because the numeric variables get used + for other things in complicated expansions. + +. The default for rfc4131_query_timeout has been changed from 30s to 5s. + +. It is possible to use setclassresources() on some BSD OS to control the + resources used in pipe deliveries. + +. A new ACL modifier called add_header, which can be used with any verb. + +. More errors are detectable in retry rules. + +There are a number of other additions too. Version 4.60