X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/ad42405613da5439cab19b4c713f000eb9cb1d2e..7a601efb64703a02c860c84b709079b18c7ab33d:/test/runtest

diff --git a/test/runtest b/test/runtest
index 2c76f176b..bdba26fc9 100755
--- a/test/runtest
+++ b/test/runtest
@@ -14,8 +14,10 @@
 ###############################################################################
 
 #use strict;
+#use 5.010;
 use Errno;
 use FileHandle;
+use IO::Socket::INET;
 use Socket;
 use Time::Local;
 use Cwd;
@@ -80,15 +82,19 @@ $parm_port_d = 1225;         # Used for the Exim daemon
 $parm_port_d2 = 1226;        # Additional for daemon
 $parm_port_d3 = 1227;        # Additional for daemon
 $parm_port_d4 = 1228;        # Additional for daemon
+my $dynamic_socket;          # allocated later for PORT_DYNAMIC
 
 # Manually set locale
-$ENV{'LC_ALL'} = 'C';
+$ENV{LC_ALL} = 'C';
 
 # In some environments USER does not exists, but we
 # need it for some test(s)
 $ENV{USER} = getpwuid($>)
   if not exists $ENV{USER};
 
+my ($parm_configure_owner, $parm_configure_group);
+my ($parm_ipv4, $parm_ipv6);
+my $parm_hostname;
 
 ###############################################################################
 ###############################################################################
@@ -138,6 +144,7 @@ s?\bPORT_S\b?$parm_port_s?g;
 s?\bTESTNUM\b?$_[0]?g;
 s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
 s?\bV6NET:?$parm_ipv6_test_net:?g;
+s?\bPORT_DYNAMIC\b?$dynamic_socket->sockport()?eg;
 }
 
 
@@ -672,6 +679,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Port in host address in spool file output from -Mvh
   s/^-host_address (.*)\.\d+/-host_address $1.9999/;
 
+  if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
+    s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
+  }
+
 
   # ======== Local IP addresses ========
   # The amount of space between "host" and the address in verification output
@@ -758,6 +769,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/Delivered\s+\d+/Delivered              nnn/;
 
 
+  # ======== Values in spool space failure message ========
+  s/space=\d+ inodes=[+-]?\d+/space=xxxxx inodes=xxxxx/;
+
+
   # ======== Filter sizes ========
   # The sizes of filter files may vary because of the substitution of local
   # filenames, logins, etc.
@@ -2152,8 +2167,7 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
 
     # Done backwards just in case there are more than 9
 
-    my($i);
-    for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
+    for (my $i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
     if ( $args =~ /\$msg\d/ )
       {
       tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
@@ -2218,31 +2232,24 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
     }
   elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
     {
+
+    # The port and the $dynamic_socket was already allocated while parsing the
+    # script file, where -DSERVER=wait:PORT_DYNAMIC was encountered.
+
     my $listen_port = $1;
-    my $waitmode_sock = new FileHandle;
     if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
     run_system("sudo mkdir spool/log 2>/dev/null");
     run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
 
-    my ($s_ip,$s_port) = ('127.0.0.1', $listen_port);
-    my $sin = sockaddr_in($s_port, inet_aton($s_ip))
-        or die "** Failed packing $s_ip:$s_port\n";
-    socket($waitmode_sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
-        or die "** Unable to open socket $s_ip:$s_port: $!\n";
-    setsockopt($waitmode_sock, SOL_SOCKET, SO_REUSEADDR, 1)
-        or die "** Unable to setsockopt(SO_REUSEADDR): $!\n";
-    bind($waitmode_sock, $sin)
-        or die "** Unable to bind socket ($s_port): $!\n";
-    listen($waitmode_sock, 5);
     my $pid = fork();
     if (not defined $pid) { die "** fork failed: $!\n" }
     if (not $pid) {
       close(STDIN);
-      open(STDIN, "<&", $waitmode_sock) or die "** dup sock to stdin failed: $!\n";
-      close($waitmode_sock);
+      open(STDIN, '<&', $dynamic_socket) or die "** dup sock to stdin failed: $!\n";
+      close($dynamic_socket);
       print "[$$]>> ${cmd}-server\n" if ($debug);
       exec "exec ${cmd}-server";
-      exit(1);
+      die "Can't exec ${cmd}-server: $!\n";
     }
     while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
     select(undef, undef, undef, 0.3);             # Let the daemon get going
@@ -2339,7 +2346,7 @@ return $yield;            # Ran command and waited
 ###############################################################################
 ###############################################################################
 
-# Here beginneth the Main Program ...
+# Here begins the Main Program ...
 
 ###############################################################################
 ###############################################################################
@@ -2352,9 +2359,9 @@ print "Exim tester $testversion\n";
 # we map all (.../bin) to (.../sbin:.../bin)
 $ENV{PATH} = do {
   my %seen = map { $_, 1 } split /:/, $ENV{PATH};
-  join ':' => map { m{(.*)/bin$} 
-                ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_) 
-                : ($_) } 
+  join ':' => map { m{(.*)/bin$}
+                ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
+                : ($_) }
       split /:/, $ENV{PATH};
 };
 
@@ -2369,7 +2376,7 @@ umask 022;
 #       Check for the "less" command             #
 ##################################################
 
-$more = "more" if system("which less >/dev/null 2>&1") != 0;
+$more = 'more' if system('which less >/dev/null 2>&1') != 0;
 
 
 
@@ -2378,7 +2385,7 @@ $more = "more" if system("which less >/dev/null 2>&1") != 0;
 ##################################################
 
 print "You need to have sudo access to root to run these tests. Checking ...\n";
-if (system("sudo date >/dev/null") != 0)
+if (system('sudo true >/dev/null') != 0)
   {
   die "** Test for sudo failed: testing abandoned.\n";
   }
@@ -2558,6 +2565,17 @@ open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
   die "** Cannot run $parm_exim: $!\n";
 while(<EXIMINFO>)
   {
+  if (my ($version) = /^Exim version (\S+)/) {
+    my $git = `git describe --dirty=-XX --match 'exim-4*'`;
+    if (defined $git and $? == 0) {
+      chomp $git;
+      $version =~ s/^\d+\K\./_/;
+      $git =~ s/^exim-//i;
+      $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
+      print "\n*** Version mismatch (Exim: $version vs. GIT: $git). ***\n\n"
+        if not $version eq $git;
+    }
+  }
   $parm_eximuser = $1 if /^exim_user = (.*)$/;
   $parm_eximgroup = $1 if /^exim_group = (.*)$/;
   $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
@@ -3020,39 +3038,26 @@ else
 # Find this host's IP addresses - there may be many, of course, but we keep
 # one of each type (IPv4 and IPv6).
 
-$parm_ipv4 = "";
-$parm_ipv6 = "";
-
-$local_ipv4 = "";
-$local_ipv6 = "";
-
-open(IFCONFIG, "ifconfig -a|") || die "** Cannot run \"ifconfig\": $!\n";
-while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
+open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address' : 'ifconfig -a')
+  or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
+while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
   {
-  my($ip);
-  if ($parm_ipv4 eq "" &&
-      $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
+  if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
     {
-    $ip = $1;
-    next if ($ip =~ /^127\./ || $ip =~ /^10\./);
-    $parm_ipv4 = $ip;
+    next if $1 =~ /^(?:127|10)\./;
+    $parm_ipv4 = $1;
     }
 
-  if ($parm_ipv6 eq "" &&
-      $_ =~ /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)/i)
+  if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:\/\d+)/i)
     {
-    $ip = $1;
-    next if ($ip eq "::1" || $ip =~ /^fe80/i);
-    $parm_ipv6 = $ip;
+    next if $1 eq '::1' or $1 =~ /^fe80/i;
+    $parm_ipv6 = $1;
     }
   }
 close(IFCONFIG);
 
 # Use private IP addresses if there are no public ones.
 
-$parm_ipv4 = $local_ipv4 if ($parm_ipv4 eq "");
-$parm_ipv6 = $local_ipv6 if ($parm_ipv6 eq "");
-
 # If either type of IP address is missing, we need to set the value to
 # something other than empty, because that wrecks the substitutions. The value
 # is reflected, so use a meaningful string. Set appropriate options for the
@@ -3061,7 +3066,7 @@ $parm_ipv6 = $local_ipv6 if ($parm_ipv6 eq "");
 # of IPV4 or IPv6 can be simulated by command options, which force $have_ipv4
 # and $have_ipv6 false.
 
-if ($parm_ipv4 eq "")
+if (not $parm_ipv4)
   {
   $have_ipv4 = 0;
   $parm_ipv4 = "<no IPv4 address found>";
@@ -3077,7 +3082,7 @@ else
   $parm_running{"IPv4"} = " ";
   }
 
-if ($parm_ipv6 eq "")
+if (not $parm_ipv6)
   {
   $have_ipv6 = 0;
   $parm_ipv6 = "<no IPv6 address found>";
@@ -3125,8 +3130,9 @@ if ($parm_ipv6 =~ /^[\da-f]/)
 # Find the host name, fully qualified.
 
 chomp($temp = `hostname`);
+die "'hostname' didn't return anything\n" unless defined $temp and length $temp;
 $parm_hostname = (gethostbyname($temp))[0];
-$parm_hostname = "no.host.name.found" if $parm_hostname eq "";
+$parm_hostname = "no.host.name.found" unless defined $parm_hostname and length $parm_hostname;
 print "Hostname is $parm_hostname\n";
 
 if ($parm_hostname !~ /\./)
@@ -3589,6 +3595,8 @@ foreach $test (@test_list)
   my($docheck) = 1;
   my($thistestdir) = substr($test, 0, -5);
 
+  $dynamic_socket->close() if $dynamic_socket;
+
   if ($lasttestdir ne $thistestdir)
     {
     $gnutls = 0;
@@ -3657,6 +3665,16 @@ foreach $test (@test_list)
     if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
     if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
     if (/^sortlog/)          { $sortlog = 1; next; }
+    if (/\bPORT_DYNAMIC\b/)  {
+      for (my $port = 1024; $port < 65000; $port++) {
+        $dynamic_socket = IO::Socket::INET->new(
+          LocalHost => '127.0.0.1',
+          LocalPort => $port,
+          Listen => 10,
+          ReuseAddr => 1,
+        ) and last;
+      }
+      }
     }
   # Reset to beginning of file for per test interpreting/processing
   seek(SCRIPT, 0, 0);
@@ -3903,4 +3921,3 @@ tests_exit(-1, "No runnable tests selected") if @test_list == 0;
 tests_exit(0);
 
 # End of runtest script
-# vim: set sw=2 et :