X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/acfde2172e82f6b776f16d78f789c6968b69b9f0..4468bfff7dc28b9c54a5225d3f10a6aa6a67a1d9:/test/runtest diff --git a/test/runtest b/test/runtest index 8e3a1f42c..e77a4afae 100755 --- a/test/runtest +++ b/test/runtest @@ -369,6 +369,10 @@ my($is_mail) = $file =~ /mail/; $date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}"; +# Debug time & pid + +$time_pid = "(?:\\d{2}:\\d{2}:\\d{2}\\s+\\d+\\s)"; + # Pattern for matching pids at start of stderr lines; initially something # that won't match. @@ -428,6 +432,8 @@ RESET_AFTER_EXTRA_LINE_READ: # There are differences in error messages between OpenSSL versions s/SSL_CTX_set_cipher_list/SSL_connect/; + s/error=\Kauthority and subject key identifier mismatch/self signed certificate/; + s/error=\Kself-signed certificate/self signed certificate/; # One error test in expansions mentions base 62 or 36 s/is not a base (36|62) number/is not a base 36\/62 number/; @@ -788,7 +794,7 @@ RESET_AFTER_EXTRA_LINE_READ: } # Port in host address in spool file output from -Mvh - s/^(--?host_address) (.*)\.\d+/$1 $2.9999/; + s/^(--?host_address) (.*[:.])\d+$/$1 ${2}9999/; if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) { s/^Connecting to 127\.0\.0\.1 port \K$port//; @@ -902,9 +908,10 @@ RESET_AFTER_EXTRA_LINE_READ: # numbers, or handle specific bad conditions in different ways, leading to # different wording in the error messages, so we cannot compare them. -#XXX This loses any trailing "deliving unencypted to" which is unfortunate +#XXX This loses any trailing "delivering unencypted to" which is unfortunate # but I can't work out how to deal with that. s/(TLS session: \(SSL_\w+\): error:)(.*)(?!: delivering)/$1 <>/; + s/TLS error on connection from .*\K\(SSL_accept\): error:.*:unexpected eof while reading$/(tls lib accept fn): TCP connection closed by peer/; s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <>/; next if /SSL verify error: depth=0 error=certificate not trusted/; @@ -960,6 +967,9 @@ RESET_AFTER_EXTRA_LINE_READ: # MIME boundaries in RFC3461 DSN messages s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/; + # Cyrus SASL library version differences (rejectlog) + s/Cyrus SASL permanent failure: \Kuser not found$/generic failure/; + # ========================================================== # Some munging is specific to the specific file types @@ -1001,8 +1011,10 @@ RESET_AFTER_EXTRA_LINE_READ: next if /SSL verify error: depth=0 error=certificate not trusted/; s/SSL3_READ_BYTES/ssl3_read_bytes/i; s/CONNECT_CR_FINISHED/ssl3_read_bytes/i; - s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/; - s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/; + s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/; + s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/; + s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/; + s/^error:\K[[:xdigit:]]+:SSL routines::((tlsv1|sslv3) alert (unknown ca|certificate revoked))$/dddddddd:SSL routines:ssl3_read_bytes:$1/; # gnutls version variances next if /^Error in the pull function./; @@ -1071,6 +1083,9 @@ RESET_AFTER_EXTRA_LINE_READ: # drop gnutls version strings next if /GnuTLS compile-time version: \d+[\.\d]+$/; next if /GnuTLS runtime version: \d+[\.\d]+$/; + # and unwanted debug + next if /^GnuTLS<2>: FIPS140-2 (context is not set|operation mode switched from initial to not-approved)$/; + next if /^GnuTLS<3>: ASSERT: sign.c\[_gnutls_sign_is_secure2\]:\d+$/; # drop openssl version strings next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/; @@ -1103,6 +1118,10 @@ RESET_AFTER_EXTRA_LINE_READ: next if /^GnuTLS<2>: Intel (AES|GCM) accelerator was detected/; next if /^Added \d{3} certificate authorities/; next if /^TLS: not preloading CRL for server/; + next if /^GnuTLS<3>: ASSERT: extensions.c\[_gnutls_get_extension/; + next if /^GnuTLS<3>: ASSERT: \.\.\/\.\.\/\.\.\/lib\/x509\//; + next if /^GnuTLS<2>: Initializing PKCS #11 modules/; + # only kevent platforms (FreeBSD, OpenBSD) say this next if /^watch dir/; @@ -1117,28 +1136,28 @@ RESET_AFTER_EXTRA_LINE_READ: next if /^TLS: not preloading server certs$/; # drop lookups - next if /^(?:\d\d:\d\d:\d\d\ \d+\ )?(?: Lookups\ \(built-in\): + next if /^$time_pid?(?: Lookups\ \(built-in\): | Loading\ lookup\ modules\ from | Loaded\ \d+\ lookup\ modules | Total\ \d+\ lookups)/x; # drop compiler information - next if /^(?:\d\d:\d\d:\d\d \d+ )?Compiler:/; + next if /^$time_pid?Compiler:/; # and the ugly bit # different libraries will have different numbers (possibly 0) of follow-up # lines, indenting with more data - if (/^(?:\d\d:\d\d:\d\d \d+ )?Library version:/) { + if (/^$time_pid?Library version:/) { while (1) { $_ = ; - next if /^(?:\d\d:\d\d:\d\d \d+ )?\s/; + next if /^$time_pid?\s/; goto RESET_AFTER_EXTRA_LINE_READ; } } # drop other build-time controls emitted for debugging - next if /^(?:\d\d:\d\d:\d\d \d+ )?WHITELIST_D_MACROS:/; - next if /^(?:\d\d:\d\d:\d\d \d+ )?TRUSTED_CONFIG_LIST:/; + next if /^$time_pid?WHITELIST_D_MACROS:/; + next if /^$time_pid?TRUSTED_CONFIG_LIST:/; # As of Exim 4.74, we log when a setgid fails; because we invoke Exim # with -be, privileges will have been dropped, so this will always @@ -1286,7 +1305,7 @@ RESET_AFTER_EXTRA_LINE_READ: } # Different builds will have different lookup types included - s/^search_type \K\d+ \((\w+)\) quoting -1 \(none\)$/NN ($1) quoting -1 (none)/; + s/^\s*search_type \K\d+ \((\w+)\) quoting -1 \(none\)$/NN ($1) quoting -1 (none)/; # DISABLE_OCSP next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/; @@ -1410,10 +1429,10 @@ RESET_AFTER_EXTRA_LINE_READ: # Time-only, in debug output # we have to handle double lines from the DBOPEN, hence placed down here and /mg - s/^\d\d:\d\d:\d\d\s/01:01:01 /mg; + s/^\d\d:\d\d:\d\d\s+/01:01:01 /mg; # pid in debug lines - s/^(\d\d:\d\d:\d\d)(\s\d+\s)/"$1 " . new_value($2, "%s", \$next_pid) . " "/mgxe; + s/^(\d\d:\d\d:\d\d)(\s+\d+\s)/"$1 " . new_value($2, "%s", \$next_pid) . " "/mgxe; s/(? 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1/', 'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1/'}, - 'debuglog_stdout' => - { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //; - s/Process \d+ is ready for new message/Process pppp is ready for new message/; - s/^(?:daemon-accept forked for daemon-accept-delivery:|forked delivery process) \K\d+$/pppp/;' - }, - 'timeout_errno' => # actual errno differs Solaris vs. Linux { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 /' }, @@ -2035,7 +2047,7 @@ if (! $message_skip) foreach $mail (@mails) { - next if $mail eq "test-mail/oncelog"; + next if $mail =~ /^test-mail\/oncelog(.(dir|pag|db))?$/; $saved_mail = substr($mail, 10); # Remove "test-mail/" $saved_mail =~ s/^$parm_caller(\/|$)/CALLER/; # Convert caller name @@ -2413,6 +2425,17 @@ if (/^exigrep\s+(.*)/) } +# The "exiqgrep" command runs exiqgrep on the current spool + +if (/^exiqgrep(\s+.*)?/) + { + run_system("(./eximdir/exiqgrep -E ./eximdir/exim -C $parm_cwd/test-config" . ($1 || '') . ";" . + "echo exiqgrep exit code = \$?)" . + ">>test-stdout"); + return 1; + } + + # The "eximstats" command runs eximstats on the current mainlog if (/^eximstats\s+(.*)/) @@ -3795,7 +3818,7 @@ if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdi $dbm_build_deleted = 1; } -foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats)) { +foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats exiqgrep)) { cp("$parm_exim_dir/$tool" => "eximdir/$tool") or tests_exit(-1, "Failed to make a copy of $tool: $!"); } @@ -3803,7 +3826,7 @@ foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats)) { # Collect some version information print '-' x 78, "\n"; print "Perl version for runtest: $]\n"; -foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) { +foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats exiqgrep)) { # fold (or unfold?) multiline output into a one-liner print join(', ', map { chomp; $_ } `$_ --version`), "\n"; }