X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/a7ee59558e5cf70be000dbf421d69fb6c8c171c4..0e83c1487c22c96953f57e103d0fefabb15abe77:/src/README.UPDATING diff --git a/src/README.UPDATING b/src/README.UPDATING index 3ee3035e9..05b3d9d97 100644 --- a/src/README.UPDATING +++ b/src/README.UPDATING @@ -26,6 +26,208 @@ The rest of this document contains information about changes in 4.xx releases that might affect a running system. +Exim version 4.89 +----------------- + + * SMTP CHUNKING in Exim 4.88 did not ensure that received mails had a final + newline; attempts to deliver such messages onwards to non-chunking hosts + would probably hang, as Exim does not insert the newline before a ".". + In 4.89, the newline is added upon receipt. For already-received messages + in your queue, try util/chunking_fixqueue_finalnewlines.pl + to walk the queue, fixing any affected messages. Note that because a + delivery attempt will be hanging, attempts to lock the messages for fixing + them will stall; stopping all queue-runners temporarily is recommended. + + * OpenSSL: oldest supported release series is now 1.0.2, which is the oldest + supported by the OpenSSL project. If you can build Exim with an older + release series, congratulations. If you can't, then upgrade. + The file doc/openssl.txt contains instructions for installing a current + OpenSSL outside the system library paths and building Exim to use it. + + * FreeBSD: we now always use the system iconv in libc, as all versions of + FreeBSD supported by the FreeBSD project provide this functionality. + + +Exim version 4.88 +----------------- + + * The "demime" ACL condition, deprecated for the past 10 years, has + now been removed. + + * Old GnuTLS configuration options "gnutls_require_kx", "gnutls_require_mac", + and "gnutls_require_protocols" have now been removed. (Inoperative from + 4.80, per below; logging warnings since 4.83, again per below). + + +Exim version 4.83 +----------------- + + * SPF condition results renamed "permerror" and "temperror". The old + names are still accepted for back-compatability, for this release. + + * TLS details are now logged on rejects, subject to log selectors. + + * Items in headers_remove lists must now have any embedded list-separators + doubled. + + * Attempted use of the deprecated options "gnutls_require_kx" et. al. + now result in logged warning. + + +Exim version 4.82 +----------------- + + * New option gnutls_allow_auto_pkcs11 defaults false; if you have GnuTLS 2.12.0 + or later and do want PKCS11 modules to be autoloaded, then set this option. + + * A per-transport wait- database is no longer updated if the transport + sets "connection_max_messages" to 1, as it can not be used and causes + unnecessary serialisation and load. External tools tracking the state of + Exim by the hints databases may need modification to take this into account. + + * The av_scanner option can now accept multiple clamd TCP targets, all other + setting limitations remain. + + +Exim version 4.80 +----------------- + + * BEWARE backwards-incompatible changes in SSL libraries, thus the version + bump. See points below for details. + Also an LDAP data returned format change. + + * The value of $tls_peerdn is now print-escaped when written to the spool file + in a -tls_peerdn line, and unescaped when read back in. We received reports + of values with embedded newlines, which caused spool file corruption. + + If you have a corrupt spool file and you wish to recover the contents after + upgrading, then lock the message, replace the new-lines that should be part + of the -tls_peerdn line with the two-character sequence \n and then unlock + the message. No tool has been provided as we believe this is a rare + occurence. + + * For OpenSSL, SSLv2 is now disabled by default. (GnuTLS does not support + SSLv2). RFC 6176 prohibits SSLv2 and some informal surveys suggest no + actual usage. You can re-enable with the "openssl_options" Exim option, + in the main configuration section. Note that supporting SSLv2 exposes + you to ciphersuite downgrade attacks. + + * With OpenSSL 1.0.1+, Exim now supports TLS 1.1 and TLS 1.2. If built + against 1.0.1a then you will get a warning message and the + "openssl_options" value will not parse "no_tlsv1_1": the value changes + incompatibly between 1.0.1a and 1.0.1b, because the value chosen for 1.0.1a + is infelicitous. We advise avoiding 1.0.1a. + + "openssl_options" gains "no_tlsv1_1", "no_tlsv1_2" and "no_compression". + + COMPATIBILITY WARNING: The default value of "openssl_options" is no longer + "+dont_insert_empty_fragments". We default to "+no_sslv2". + That old default was grandfathered in from before openssl_options became a + configuration option. + Empty fragments are inserted by default through TLS1.0, to partially defend + against certain attacks; TLS1.1+ change the protocol so that this is not + needed. The DIEF SSL option was required for some old releases of mail + clients which did not gracefully handle the empty fragments, and was + initially set in Exim release 4.31 (see ChangeLog, item 37). + + If you still have affected mail-clients, and you see SSL protocol failures + with this release of Exim, set: + openssl_options = +dont_insert_empty_fragments + in the main section of your Exim configuration file. You're trading off + security for compatibility. Exim is now defaulting to higher security and + rewarding more modern clients. + + If the option tls_dhparams is set and the parameters loaded from the file + have a bit-count greater than the new option tls_dh_max_bits, then the file + will now be ignored. If this affects you, raise the tls_dh_max_bits limit. + We suspect that most folks are using dated defaults and will not be affected. + + * Ldap lookups returning multi-valued attributes now separate the attributes + with only a comma, not a comma-space sequence. Also, an actual comma within + a returned attribute is doubled. This makes it possible to parse the + attribute as a comma-separated list. Note the distinction from multiple + attributes being returned, where each one is a name=value pair. + + If you are currently splitting the results from LDAP upon a comma, then you + should check carefully to see if adjustments are needed. + + This change lets cautious folks distinguish "comma used as separator for + joining values" from "comma inside the data". + + * accept_8bitmime now defaults on, which is not RFC compliant but is better + suited to today's Internet. See http://cr.yp.to/smtp/8bitmime.html for a + sane rationale. Those who wish to be strictly RFC compliant, or know that + they need to talk to servers that are not 8-bit-clean, now need to take + explicit configuration action to default this option off. This is not a + new option, you can safely force it off before upgrading, to decouple + configuration changes from the binary upgrade while remaining RFC compliant. + + * The GnuTLS support has been mostly rewritten, to use APIs which don't cause + deprecation warnings in GnuTLS 2.12.x. As part of this, these three options + are no longer supported: + + gnutls_require_kx + gnutls_require_mac + gnutls_require_protocols + + Their functionality is entirely subsumed into tls_require_ciphers. In turn, + tls_require_ciphers is no longer an Exim list and is not parsed by Exim, but + is instead given to gnutls_priority_init(3), which expects a priority string; + this behaviour is much closer to the OpenSSL behaviour. See: + + http://www.gnutls.org/manual/html_node/Priority-Strings.html + + for fuller documentation of the strings parsed. The three gnutls_require_* + options are still parsed by Exim and, for this release, silently ignored. + A future release will add warnings, before a later still release removes + parsing entirely and the presence of the options will be a configuration + error. + + Note that by default, GnuTLS will not accept RSA-MD5 signatures in chains. + A tls_require_ciphers value of NORMAL:%VERIFY_ALLOW_SIGN_RSA_MD5 may + re-enable support, but this is not supported by the Exim maintainers. + Our test suite no longer includes MD5-based certificates. + + This rewrite means that Exim will continue to build against GnuTLS in the + future, brings Exim closer to other GnuTLS applications and lets us add + support for SNI and other features more readily. We regret that it wasn't + feasible to retain the three dropped options. + + * If built with TLS support, then Exim will now validate the value of + the main section tls_require_ciphers option at start-up. Before, this + would cause a STARTTLS 4xx failure, now it causes a failure to start. + Running with a broken configuration which causes failures that may only + be left in the logs has been traded off for something more visible. This + change makes an existing problem more prominent, but we do not believe + anyone would deliberately be running with an invalid tls_require_ciphers + option. + + This also means that library linkage issues caused by conflicts of some + kind might take out the main daemon, not just the delivery or receiving + process. Conceivably some folks might prefer to continue delivering + mail plaintext when their binary is broken in this way, if there is a + server that is a candidate to receive such mails that does not advertise + STARTTLS. Note that Exim is typically a setuid root binary and given + broken linkage problems that cause segfaults, we feel it is safer to + fail completely. (The check is not done as root, to ensure that problems + here are not made worse by the check). + + * The "tls_dhparam" option has been updated, so that it can now specify a + path or an identifier for a standard DH prime from one of a few RFCs. + The default for OpenSSL is no longer to not use DH but instead to use + one of these standard primes. The default for GnuTLS is no longer to use + a file in the spool directory, but to use that same standard prime. + The option is now used by GnuTLS too. If it points to a path, then + GnuTLS will use that path, instead of a file in the spool directory; + GnuTLS will attempt to create it if it does not exist. + + To preserve the previous behaviour of generating files in the spool + directory, set "tls_dhparam = historic". Since prior releases of Exim + ignored tls_dhparam when using GnuTLS, this can safely be done before + the upgrade. + + + Exim version 4.77 ----------------- @@ -35,6 +237,9 @@ Exim version 4.77 problem. Prior to this release, supported values were "TLS1" and "SSL3", so you should be able to update configuration prior to update. + [nb: gnutls_require_protocols removed in Exim 4.80, instead use + tls_require_ciphers to provide a priority string; see notes above] + * The match_{string1}{string2} expansion conditions no longer subject string2 to string expansion, unless Exim was built with the new "EXPAND_LISTMATCH_RHS" option. Too many people have inadvertently created @@ -358,7 +563,7 @@ Version 4.23 3. Version 4.23 saves the contents of the ACL variables with the message, so that they can be used later. If one of these variables contains a newline, there will be a newline character in the spool that will not be interpreted - correctely by a previous version of Exim. (Exim ignores keyed spool file + correctly by a previous version of Exim. (Exim ignores keyed spool file items that it doesn't understand - precisely for this kind of problem - but it expects them all to be on one line.)