X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/9e4dddbde4228e83fc7c882a4ef410ddbe0a6e79..a2204cac393bb160ae7f253b9bb5280fc35ca3a3:/doc/doc-docbook/spec.xfpt diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 6497157f6..09ce79848 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -5557,16 +5557,21 @@ unreachable. The next two lines are concerned with &'ident'& callbacks, as defined by RFC 1413 (hence their names): .code -rfc1413_hosts = * -rfc1413_query_timeout = 5s +rfc1413_query_hosts = * +rfc1413_query_timeout = 0s +.endd +These settings cause Exim to avoid ident callbacks for all incoming SMTP calls. +Few hosts offer RFC1413 service these days; calls have to be +terminated by a timeout and this needlessly delays the startup +of an incoming SMTP connection. +If you have hosts for which you trust RFC1413 and need this +information, you can change this. + +This line enables an efficiency SMTP option. It is negociated by clients +and not expected to cause problems but can be disabled if needed. +.code +prdr_enable = true .endd -These settings cause Exim to make ident callbacks for all incoming SMTP calls. -You can limit the hosts to which these calls are made, or change the timeout -that is used. If you set the timeout to zero, all ident calls are disabled. -Although they are cheap and can provide useful information for tracing problem -messages, some hosts and firewalls have problems with ident calls. This can -result in a timeout instead of an immediate refused connection, leading to -delays on starting up an incoming SMTP session. When Exim receives messages over SMTP connections, it expects all addresses to be fully qualified with a domain, as required by the SMTP definition. However, @@ -6002,9 +6007,14 @@ One remote transport and four local transports are defined. .code remote_smtp: driver = smtp + hosts_try_prdr = * .endd -This transport is used for delivering messages over SMTP connections. All its -options are defaulted. The list of remote hosts comes from the router. +This transport is used for delivering messages over SMTP connections. +The list of remote hosts comes from the router. +The &%hosts_try_prdr%& option enables an efficiency SMTP option. +It is negotiated between client and server +and not expected to cause problems but can be disabled if needed. +All other options are defaulted. .code local_delivery: driver = appendfile @@ -8887,10 +8897,10 @@ the certificate. Supported fields are: .display &`version `& &`serial_number `& -&`subject `& -&`issuer `& -&`notbefore `& -&`notafter `& +&`subject `& RFC4514 DN +&`issuer `& RFC4514 DN +&`notbefore `& time +&`notafter `& time &`sig_algorithm `& &`signature `& &`subj_altname `& tagged list @@ -8909,6 +8919,22 @@ extracted is used. Some field names take optional modifiers, appended and separated by commas. +The field selectors marked as "RFC4514" above +output a Distinguished Name string which is +not quite +parseable by Exim as a comma-separated tagged list +(the exceptions being elements containin commas). +RDN elements of a single type may be selected by +a modifier of the type label; if so the expansion +result is a list (newline-separated by default). +The separator may be changed by another modifer of +a right angle-bracket followed immediately by the new separator. +Recognised RDN type labels include "CN", "O", "OU" and "DC". + +The field selectors marked as "time" above +may output a number of seconds since epoch +if the modifier "int" is used. + The field selectors marked as "list" above return a list, newline-separated by default, (embedded separator characters in elements are doubled). @@ -8921,7 +8947,7 @@ Elements of only one type may be selected by a modifier which is one of "dns", "uri" or "mail"; if so the elenment tags are omitted. -Field values are generally presented in human-readable form. +If not otherwise noted field values are presented in human-readable form. .wen .vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&& @@ -9571,11 +9597,25 @@ expansion item above. {*&<&'string2'&>&*}}*&" .cindex "expansion" "running a command" .cindex "&%run%& expansion item" -The command and its arguments are first expanded separately, and then the -command is run in a separate process, but under the same uid and gid. As in -other command executions from Exim, a shell is not used by default. If you want +.new +The command and its arguments are first expanded as one string. The string is +split apart into individual arguments by spaces, and then the command is run +in a separate process, but under the same uid and gid. As in other command +executions from Exim, a shell is not used by default. If the command requires a shell, you must explicitly code it. +Since the arguments are split by spaces, when there is a variable expansion +which has an empty result, it will cause the situation that the argument will +simply be omitted when the program is actually executed by Exim. If the +script/program requires a specific number of arguments and the expanded +variable could possibly result in this empty expansion, the variable must be +quoted. This is more difficult if the expanded variable itself could result +in a string containing quotes, because it would interfere with the quotes +around the command arguments. A possible guard against this is to wrap the +variable in the &%sg%& operator to change any quote marks to some other +character. +.wen + The standard input for the command exists, but is empty. The standard output and standard error are set to the same file descriptor. .cindex "return code" "from &%run%& expansion" @@ -10036,6 +10076,7 @@ Letters in IPv6 addresses are always output in lower case. .vitem &*${md5:*&<&'string'&>&*}*& .cindex "MD5 hash" .cindex "expansion" "MD5 hash" +.cindex "certificate fingerprint" .cindex "&%md5%& expansion item" The &%md5%& operator computes the MD5 hash value of the string, and returns it as a 32-digit hexadecimal number, in which any letters are in lower case. @@ -10173,11 +10214,24 @@ variables or headers inside regular expressions. .vitem &*${sha1:*&<&'string'&>&*}*& .cindex "SHA-1 hash" .cindex "expansion" "SHA-1 hashing" +.cindex "certificate fingerprint" .cindex "&%sha2%& expansion item" The &%sha1%& operator computes the SHA-1 hash value of the string, and returns it as a 40-digit hexadecimal number, in which any letters are in upper case. +.vitem &*${sha256:*&<&'certificate'&>&*}*& +.cindex "SHA-256 hash" +.cindex "certificate fingerprint" +.cindex "expansion" "SHA-256 hashing" +.cindex "&%sha256%& expansion item" +The &%sha256%& operator computes the SHA-256 hash fingerprint of the +certificate, +and returns +it as a 64-digit hexadecimal number, in which any letters are in upper case. +Only arguments which are a single variable of certificate type are supported. + + .vitem &*${stat:*&<&'string'&>&*}*& .cindex "expansion" "statting a file" .cindex "file" "extracting characteristics" @@ -12063,7 +12117,8 @@ received. It is empty if there was no successful authentication. See also .vitem &$sender_host_dnssec$& .vindex "&$sender_host_dnssec$&" -If &$sender_host_name$& has been populated (by reference, &%hosts_lookup%& or +If an attempt to populate &$sender_host_name$& has been made +(by reference, &%hosts_lookup%& or otherwise) then this boolean will have been set true if, and only if, the resolver library states that the reverse DNS was authenticated data. At all other times, this variable is false. @@ -12308,7 +12363,8 @@ If TLS has not been negotiated, the value will be 0. This variable refers to the certificate presented to the peer of an inbound connection when the message was received. It is only useful as the argument of a -&%certextract%& expansion item or the name for a &%def%& expansion condition. +&%certextract%& expansion item, &%md5%& or &%sha1%& operator, +or a &%def%& condition. .wen .new @@ -12317,7 +12373,8 @@ It is only useful as the argument of a This variable refers to the certificate presented by the peer of an inbound connection when the message was received. It is only useful as the argument of a -&%certextract%& expansion item or the name for a &%def%& expansion condition. +&%certextract%& expansion item, &%md5%& or &%sha1%& operator, +or a &%def%& condition. .wen .new @@ -12325,7 +12382,8 @@ It is only useful as the argument of a .vindex "&$tls_out_ourcert$&" This variable refers to the certificate presented to the peer of an outbound connection. It is only useful as the argument of a -&%certextract%& expansion item or the name for a &%def%& expansion condition. +&%certextract%& expansion item, &%md5%& or &%sha1%& operator, +or a &%def%& condition. .wen .new @@ -12333,7 +12391,8 @@ outbound connection. It is only useful as the argument of a .vindex "&$tls_out_peercert$&" This variable refers to the certificate presented by the peer of an outbound connection. It is only useful as the argument of a -&%certextract%& expansion item or the name for a &%def%& expansion condition. +&%certextract%& expansion item, &%md5%& or &%sha1%& operator, +or a &%def%& condition. .wen .vitem &$tls_in_certificate_verified$& @@ -12679,8 +12738,9 @@ option), the interfaces and ports on which it listens are controlled by the following options: .ilist -&%daemon_smtp_ports%& contains a list of default ports. (For backward -compatibility, this option can also be specified in the singular.) +&%daemon_smtp_ports%& contains a list of default ports +or service names. +(For backward compatibility, this option can also be specified in the singular.) .next &%local_interfaces%& contains list of interface IP addresses on which to listen. Each item may optionally also specify a port. @@ -12781,7 +12841,8 @@ value of &%daemon_smtp_ports%& is no longer relevant in this example.) Exim supports the obsolete SSMTP protocol (also known as SMTPS) that was used before the STARTTLS command was standardized for SMTP. Some legacy clients still use this protocol. If the &%tls_on_connect_ports%& option is set to a -list of port numbers, connections to those ports must use SSMTP. The most +list of port numbers or service names, +connections to those ports must use SSMTP. The most common use of this option is expected to be .code tls_on_connect_ports = 465 @@ -13117,6 +13178,7 @@ listed in more than one group. .row &%acl_smtp_auth%& "ACL for AUTH" .row &%acl_smtp_connect%& "ACL for connection" .row &%acl_smtp_data%& "ACL for DATA" +.row &%acl_smtp_data_prdr%& "ACL for DATA, per-recipient" .row &%acl_smtp_dkim%& "ACL for DKIM verification" .row &%acl_smtp_etrn%& "ACL for ETRN" .row &%acl_smtp_expn%& "ACL for EXPN" @@ -13177,6 +13239,7 @@ listed in more than one group. .row &%tls_crl%& "certificate revocation list" .row &%tls_dh_max_bits%& "clamp D-H bit count suggestion" .row &%tls_dhparam%& "DH parameters for server" +.row &%tls_ocsp_file%& "location of server certificate status proof" .row &%tls_on_connect_ports%& "specify SSMTP (SMTPS) ports" .row &%tls_privatekey%& "location of server private key" .row &%tls_remember_esmtp%& "don't reset after starting TLS" @@ -13272,6 +13335,7 @@ See also the &'Policy controls'& section above. .row &%ignore_fromline_hosts%& "allow &""From ""& from these hosts" .row &%ignore_fromline_local%& "allow &""From ""& from local SMTP" .row &%pipelining_advertise_hosts%& "advertise pipelining to these hosts" +.row &%prdr_enable%& "advertise PRDR to all hosts" .row &%tls_advertise_hosts%& "advertise TLS to these hosts" .endtable @@ -13423,6 +13487,16 @@ This option defines the ACL that is run after an SMTP DATA command has been processed and the message itself has been received, but before the final acknowledgment is sent. See chapter &<>& for further details. +.option acl_smtp_data_prdr main string&!! unset +.cindex "DATA" "ACL for" +.cindex "&ACL;" "PRDR-related" +.cindex "&ACL;" "per-user data processing" +This option defines the ACL that, +if the PRDR feature has been negotiated, +is run for each recipient after an SMTP DATA command has been +processed and the message itself has been received, but before the +acknowledgment is sent. See chapter &<>& for further details. + .option acl_smtp_etrn main string&!! unset .cindex "ETRN" "ACL for" This option defines the ACL that is run when an SMTP ETRN command is @@ -15065,6 +15139,15 @@ that clients will use it; &"out of order"& commands that are &"expected"& do not count as protocol errors (see &%smtp_max_synprot_errors%&). +.option prdr_enable main boolean false +.cindex "PRDR" "enabling on server" +This option can be used to enable the Per-Recipient Data Response extension +to SMTP, defined by Eric Hall. +If the option is set, PRDR is advertised by Exim when operating as a server. +If the client requests PRDR, and more than one recipient, for a message +an additional ACL is called for each recipient after the message content +is recieved. See section &<>&. + .option preserve_message_logs main boolean false .cindex "message logs" "preserving" If this option is set, message log files are not deleted when messages are @@ -16276,6 +16359,13 @@ prior to the 4.80 release, as Debian used to patch Exim to raise the minimum acceptable bound from 1024 to 2048. +.option tls_ocsp_file main string&!! unset +This option +must if set expand to the absolute path to a file which contains a current +status proof for the server's certificate, as obtained from the +Certificate Authority. + + .option tls_on_connect_ports main "string list" unset This option specifies a list of incoming SSMTP (aka SMTPS) ports that should operate the obsolete SSMTP (SMTPS) protocol, where a TLS session is immediately @@ -22940,6 +23030,18 @@ hard failure if required. See also &%hosts_try_auth%&, and chapter &<>& for details of authentication. +.option hosts_request_ocsp smtp "host list&!!" * +.cindex "TLS" "requiring for certain servers" +Exim will request a Certificate Status on a +TLS session for any host that matches this list. +&%tls_verify_certificates%& should also be set for the transport. + +.option hosts_require_ocsp smtp "host list&!!" unset +.cindex "TLS" "requiring for certain servers" +Exim will request, and check for a valid Certificate Status being given, on a +TLS session for any host that matches this list. +&%tls_verify_certificates%& should also be set for the transport. + .option hosts_require_tls smtp "host list&!!" unset .cindex "TLS" "requiring for certain servers" Exim will insist on using a TLS session when delivering to any host that @@ -22955,6 +23057,12 @@ connects. If authentication fails, Exim will try to transfer the message unauthenticated. See also &%hosts_require_auth%&, and chapter &<>& for details of authentication. +.option hosts_try_prdr smtp "host list&!!" unset +.cindex "PRDR" "enabling, optional in client" +This option provides a list of servers to which, provided they announce +PRDR support, Exim will attempt to negotiate PRDR +for multi-recipient messages. + .option interface smtp "string list&!!" unset .cindex "bind IP address" .cindex "IP address" "binding" @@ -23211,6 +23319,11 @@ in clear. This option gives a list of hosts for which, on encrypted connections, certificate verification will be tried but need not succeed. The &%tls_verify_certificates%& option must also be set. +Note that unless the host is in this list +TLS connections will be denied to hosts using self-signed certificates +when &%tls_verify_certificates%& is set. +The &$tls_out_certificate_verified$& variable is set when +certificate verification succeeds. .option tls_verify_certificates smtp string&!! unset @@ -25297,7 +25410,7 @@ dovecot_plain: driver = dovecot public_name = PLAIN server_socket = /var/run/dovecot/auth-client - server_set_id = $auth2 + server_set_id = $auth1 dovecot_ntlm: driver = dovecot @@ -26088,12 +26201,79 @@ certificate is supplied, &$tls_in_peerdn$& is empty. .cindex "TLS" "revoked certificates" .cindex "revocation list" .cindex "certificate" "revocation list" +.cindex "OCSP" "stapling" Certificate issuing authorities issue Certificate Revocation Lists (CRLs) when certificates are revoked. If you have such a list, you can pass it to an Exim server using the global option called &%tls_crl%& and to an Exim client using an identically named option for the &(smtp)& transport. In each case, the value of the option is expanded and must then be the name of a file that contains a CRL in PEM format. +The downside is that clients have to periodically re-download a potentially huge +file from every certificate authority the know of. + +The way with most moving parts at query time is Online Certificate +Status Protocol (OCSP), where the client verifies the certificate +against an OCSP server run by the CA. This lets the CA track all +usage of the certs. It requires running software with access to the +private key of the CA, to sign the responses to the OCSP queries. OCSP +is based on HTTP and can be proxied accordingly. + +The only widespread OCSP server implementation (known to this writer) +comes as part of OpenSSL and aborts on an invalid request, such as +connecting to the port and then disconnecting. This requires +re-entering the passphrase each time some random client does this. + +The third way is OCSP Stapling; in this, the server using a certificate +issued by the CA periodically requests an OCSP proof of validity from +the OCSP server, then serves it up inline as part of the TLS +negotiation. This approach adds no extra round trips, does not let the +CA track users, scales well with number of certs issued by the CA and is +resilient to temporary OCSP server failures, as long as the server +starts retrying to fetch an OCSP proof some time before its current +proof expires. The downside is that it requires server support. + +Unless Exim is built with the support disabled, +or with GnuTLS earlier than version 3.1.3, +support for OCSP stapling is included. + +There is a global option called &%tls_ocsp_file%&. +The file specified therein is expected to be in DER format, and contain +an OCSP proof. Exim will serve it as part of the TLS handshake. This +option will be re-expanded for SNI, if the &%tls_certificate%& option +contains &`tls_in_sni`&, as per other TLS options. + +Exim does not at this time implement any support for fetching a new OCSP +proof. The burden is on the administrator to handle this, outside of +Exim. The file specified should be replaced atomically, so that the +contents are always valid. Exim will expand the &%tls_ocsp_file%& option +on each connection, so a new file will be handled transparently on the +next connection. + +When built with OpenSSL Exim will check for a valid next update timestamp +in the OCSP proof; if not present, or if the proof has expired, it will be +ignored. + +For the client to be able to verify the stapled OCSP the server must +also supply, in its stapled information, any intermediate +certificates for the chain leading to the OCSP proof from the signer +of the server certificate. There may be zero or one such. These +intermediate certificates should be added to the server OCSP stapling +file named by &%tls_ocsp_file%&. + +Note that the proof only covers the terminal server certificate, +not any of the chain from CA to it. + +.code + A helper script "ocsp_fetch.pl" for fetching a proof from a CA + OCSP server is supplied. The server URL may be included in the + server certificate, if the CA is helpful. + + One failure mode seen was the OCSP Signer cert expiring before the end + of validity of the OCSP proof. The checking done by Exim/OpenSSL + noted this as invalid overall, but the re-fetch script did not. +.endd + + .section "Configuring an Exim client to use TLS" "SECID185" @@ -26149,6 +26329,19 @@ The &%tls_verify_hosts%& and &%tls_try_verify_hosts%& options restrict certificate verification to the listed servers. Verification either must or need not succeed respectively. +The &(smtp)& transport has two OCSP-related options: +&%hosts_require_ocsp%&; a host-list for which a Certificate Status +is requested and required for the connection to proceed. The default +value is empty. +&%hosts_request_ocsp%&; a host-list for which (additionally) +a Certificate Status is requested (but not necessarily verified). The default +value is "*" meaning that requests are made unless configured +otherwise. + +The host(s) should also be in &%hosts_require_tls%&, and +&%tls_verify_certificates%& configured for the transport, +for OCSP to be relevant. + If &%tls_require_ciphers%& is set on the &(smtp)& transport, it must contain a list of permitted cipher suites. If either of these checks fails, delivery to @@ -26234,6 +26427,9 @@ during TLS session handshake, to permit alternative values to be chosen: .next .vindex "&%tls_verify_certificates%&" &%tls_verify_certificates%& +.next +.vindex "&%tls_ocsp_file%&" +&%tls_verify_certificates%& .endlist Great care should be taken to deal with matters of case, various injection @@ -26442,6 +26638,7 @@ options in the main part of the configuration. These options are: .cindex "SMTP" "connection, ACL for" .cindex "non-SMTP messages" "ACLs for" .cindex "MIME content scanning" "ACL for" +.cindex "PRDR" "ACL for" .table2 140pt .irow &%acl_not_smtp%& "ACL for non-SMTP messages" @@ -26450,6 +26647,7 @@ options in the main part of the configuration. These options are: .irow &%acl_smtp_auth%& "ACL for AUTH" .irow &%acl_smtp_connect%& "ACL for start of SMTP connection" .irow &%acl_smtp_data%& "ACL after DATA is complete" +.irow &%acl_smtp_data_prdr%& "ACL for each recipient, after DATA is complete" .irow &%acl_smtp_etrn%& "ACL for ETRN" .irow &%acl_smtp_expn%& "ACL for EXPN" .irow &%acl_smtp_helo%& "ACL for HELO or EHLO" @@ -26564,8 +26762,10 @@ before or after the data) correctly &-- they keep the message on their queues and try again later, but that is their problem, though it does waste some of your resources. -The &%acl_smtp_data%& ACL is run after both the &%acl_smtp_dkim%& and -the &%acl_smtp_mime%& ACLs. +The &%acl_smtp_data%& ACL is run after +the &%acl_smtp_data_prdr%&, +the &%acl_smtp_dkim%& +and the &%acl_smtp_mime%& ACLs. .section "The SMTP DKIM ACL" "SECTDKIMACL" The &%acl_smtp_dkim%& ACL is available only when Exim is compiled with DKIM support @@ -26587,6 +26787,36 @@ content-scanning extension. For details, see chapter &<>&. This ACL is evaluated after &%acl_smtp_dkim%& but before &%acl_smtp_data%&. +.section "The SMTP PRDR ACL" "SECTPRDRACL" +.oindex "&%prdr_enable%&" +The &%acl_smtp_data_prdr%& ACL is available only when Exim is compiled +with PRDR support enabled (which is the default). +It becomes active only when the PRDR feature is negotiated between +client and server for a message, and more than one recipient +has been accepted. + +The ACL test specfied by &%acl_smtp_data_prdr%& happens after a message +has been recieved, and is executed for each recipient of the message. +The test may accept or deny for inividual recipients. +The &%acl_smtp_data%& will still be called after this ACL and +can reject the message overall, even if this ACL has accepted it +for some or all recipients. + +PRDR may be used to support per-user content filtering. Without it +one must defer any recipient after the first that has a different +content-filter configuration. With PRDR, the RCPT-time check +for this can be disabled when the MAIL-time $smtp_command included +"PRDR". Any required difference in behaviour of the main DATA-time +ACL should however depend on the PRDR-time ACL having run, as Exim +will avoid doing so in some situations (eg. single-recipient mails). + +See also the &%prdr_enable%& global option +and the &%hosts_try_prdr%& smtp transport option. + +This ACL is evaluated after &%acl_smtp_dkim%& but before &%acl_smtp_data%&. +If the ACL is not defined, processing completes as if +the feature was not requested by the client. + .section "The QUIT ACL" "SECTQUITACL" .cindex "QUIT, ACL for" The ACL for the SMTP QUIT command is anomalous, in that the outcome of the ACL