X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/9dea8f12c7617bcee02319adbb51353b6b35b2f8..9f5f6f757d86cd2539cbfba1f3230df743c30189:/test/runtest diff --git a/test/runtest b/test/runtest index cda11da9e..d760a0090 100755 --- a/test/runtest +++ b/test/runtest @@ -369,6 +369,10 @@ my($is_mail) = $file =~ /mail/; $date = "\\d{2}-\\w{3}-\\d{4}\\s\\d{2}:\\d{2}:\\d{2}"; +# Debug time & pid + +$time_pid = "(?:\\d{2}:\\d{2}:\\d{2}\\s+\\d+\\s)"; + # Pattern for matching pids at start of stderr lines; initially something # that won't match. @@ -428,6 +432,8 @@ RESET_AFTER_EXTRA_LINE_READ: # There are differences in error messages between OpenSSL versions s/SSL_CTX_set_cipher_list/SSL_connect/; + s/error=\Kauthority and subject key identifier mismatch/self signed certificate/; + s/error=\Kself-signed certificate/self signed certificate/; # One error test in expansions mentions base 62 or 36 s/is not a base (36|62) number/is not a base 36\/62 number/; @@ -902,9 +908,10 @@ RESET_AFTER_EXTRA_LINE_READ: # numbers, or handle specific bad conditions in different ways, leading to # different wording in the error messages, so we cannot compare them. -#XXX This loses any trailing "deliving unencypted to" which is unfortunate +#XXX This loses any trailing "delivering unencypted to" which is unfortunate # but I can't work out how to deal with that. s/(TLS session: \(SSL_\w+\): error:)(.*)(?!: delivering)/$1 <>/; + s/TLS error on connection from .*\K\(SSL_accept\): error:.*:unexpected eof while reading$/(tls lib accept fn): TCP connection closed by peer/; s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <>/; next if /SSL verify error: depth=0 error=certificate not trusted/; @@ -960,6 +967,9 @@ RESET_AFTER_EXTRA_LINE_READ: # MIME boundaries in RFC3461 DSN messages s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/; + # Cyrus SASL library version differences (rejectlog) + s/Cyrus SASL permanent failure: \Kuser not found$/generic failure/; + # ========================================================== # Some munging is specific to the specific file types @@ -1001,8 +1011,10 @@ RESET_AFTER_EXTRA_LINE_READ: next if /SSL verify error: depth=0 error=certificate not trusted/; s/SSL3_READ_BYTES/ssl3_read_bytes/i; s/CONNECT_CR_FINISHED/ssl3_read_bytes/i; - s/^\d+:error:\d+(?:E\d+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/; - s/^error:[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/error:dddddddd:$1/; + s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/; + s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/; + s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/; + s/^error:\K[[:xdigit:]]+:SSL routines::((tlsv1|sslv3) alert (unknown ca|certificate revoked))$/dddddddd:SSL routines:ssl3_read_bytes:$1/; # gnutls version variances next if /^Error in the pull function./; @@ -1071,6 +1083,9 @@ RESET_AFTER_EXTRA_LINE_READ: # drop gnutls version strings next if /GnuTLS compile-time version: \d+[\.\d]+$/; next if /GnuTLS runtime version: \d+[\.\d]+$/; + # and unwanted debug + next if /^GnuTLS<2>: FIPS140-2 (context is not set|operation mode switched from initial to not-approved)$/; + next if /^GnuTLS<3>: ASSERT: sign.c\[_gnutls_sign_is_secure2\]:\d+$/; # drop openssl version strings next if /OpenSSL compile-time version: OpenSSL \d+[\.\da-z]+/; @@ -1103,6 +1118,10 @@ RESET_AFTER_EXTRA_LINE_READ: next if /^GnuTLS<2>: Intel (AES|GCM) accelerator was detected/; next if /^Added \d{3} certificate authorities/; next if /^TLS: not preloading CRL for server/; + next if /^GnuTLS<3>: ASSERT: extensions.c\[_gnutls_get_extension/; + next if /^GnuTLS<3>: ASSERT: \.\.\/\.\.\/\.\.\/lib\/x509\//; + next if /^GnuTLS<2>: Initializing PKCS #11 modules/; + # only kevent platforms (FreeBSD, OpenBSD) say this next if /^watch dir/; @@ -1117,28 +1136,28 @@ RESET_AFTER_EXTRA_LINE_READ: next if /^TLS: not preloading server certs$/; # drop lookups - next if /^Lookups \(built-in\):/; - next if /^Loading lookup modules from/; - next if /^Loaded \d+ lookup modules/; - next if /^Total \d+ lookups/; + next if /^$time_pid?(?: Lookups\ \(built-in\): + | Loading\ lookup\ modules\ from + | Loaded\ \d+\ lookup\ modules + | Total\ \d+\ lookups)/x; # drop compiler information - next if /^Compiler:/; + next if /^$time_pid?Compiler:/; # and the ugly bit # different libraries will have different numbers (possibly 0) of follow-up # lines, indenting with more data - if (/^Library version:/) { + if (/^$time_pid?Library version:/) { while (1) { $_ = ; - next if /^\s/; + next if /^$time_pid?\s/; goto RESET_AFTER_EXTRA_LINE_READ; } } # drop other build-time controls emitted for debugging - next if /^WHITELIST_D_MACROS:/; - next if /^TRUSTED_CONFIG_LIST:/; + next if /^$time_pid?WHITELIST_D_MACROS:/; + next if /^$time_pid?TRUSTED_CONFIG_LIST:/; # As of Exim 4.74, we log when a setgid fails; because we invoke Exim # with -be, privileges will have been dropped, so this will always @@ -1285,6 +1304,9 @@ RESET_AFTER_EXTRA_LINE_READ: $_ = $line . $_; } + # Different builds will have different lookup types included + s/^\s*search_type \K\d+ \((\w+)\) quoting -1 \(none\)$/NN ($1) quoting -1 (none)/; + # DISABLE_OCSP next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/; @@ -1405,8 +1427,13 @@ RESET_AFTER_EXTRA_LINE_READ: s/^errno = \d+$/errno = EEE/; s/^writing error \d+: /writing error EEE: /; - # Some platforms have to flip to slow-mode taint-checking - next if /switching to slow-mode taint checking/; + # Time-only, in debug output + # we have to handle double lines from the DBOPEN, hence placed down here and /mg + s/^\d\d:\d\d:\d\d\s+/01:01:01 /mg; + + # pid in debug lines + s/^(\d\d:\d\d:\d\d)(\s+\d+\s)/"$1 " . new_value($2, "%s", \$next_pid) . " "/mgxe; + s/(? 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1/', 'rejectlog' => 's/^(.* SMTP protocol synchronization error .* next input=.{8}).*$/$1/'}, - 'debuglog_stdout' => - { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //; - s/Process \d+ is ready for new message/Process pppp is ready for new message/; - s/^(?:daemon-accept forked for daemon-accept-delivery:|forked delivery process) \K\d+$/pppp/;' - }, - 'timeout_errno' => # actual errno differs Solaris vs. Linux { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 /' }, @@ -2024,7 +2047,7 @@ if (! $message_skip) foreach $mail (@mails) { - next if $mail eq "test-mail/oncelog"; + next if $mail =~ /^test-mail\/oncelog(.(dir|pag|db))?$/; $saved_mail = substr($mail, 10); # Remove "test-mail/" $saved_mail =~ s/^$parm_caller(\/|$)/CALLER/; # Convert caller name @@ -2305,7 +2328,7 @@ if (/^dump\s+(\S+)/) sort { $a->[0] cmp $b->[0] } #map { [ (split)[0] =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/gr, $_ ] } # this is too modern for 5.10.1 map { - (my $k = (split)[0]) =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/g; + (my $k = (split)[0]) =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/g; [ $k, $_ ] } do { local $/ = "\n "; <$in> }; @@ -2326,6 +2349,16 @@ if (/^dump\s+(\S+)/) return $aa cmp $bb; } @temp; } + elsif ($which eq "seen") + { + @temp = sort { + (my $aa = $a) =~ s/^([\d.]+)/$1/; + (my $bb = $b) =~ s/^([\d.]+)/$1/; + $aa =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/; + $bb =~ s/\Q$parm_ipv4\E/ip4.ip4.ip4.ip4/; + return $aa cmp $bb; + } @temp; + } print $out @temp; } close($in); # close it explicitly, otherwise $? does not get set @@ -2392,6 +2425,17 @@ if (/^exigrep\s+(.*)/) } +# The "exiqgrep" command runs exiqgrep on the current spool + +if (/^exiqgrep(\s+.*)?/) + { + run_system("(./eximdir/exiqgrep -E ./eximdir/exim -C $parm_cwd/test-config" . ($1 || '') . ";" . + "echo exiqgrep exit code = \$?)" . + ">>test-stdout"); + return 1; + } + + # The "eximstats" command runs eximstats on the current mainlog if (/^eximstats\s+(.*)/) @@ -3774,7 +3818,7 @@ if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdi $dbm_build_deleted = 1; } -foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats)) { +foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats exiqgrep)) { cp("$parm_exim_dir/$tool" => "eximdir/$tool") or tests_exit(-1, "Failed to make a copy of $tool: $!"); } @@ -3782,7 +3826,7 @@ foreach my $tool (qw(exim_dumpdb exim_lock exinext exigrep eximstats)) { # Collect some version information print '-' x 78, "\n"; print "Perl version for runtest: $]\n"; -foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats)) { +foreach (map { "./eximdir/$_" } qw(exigrep exinext eximstats exiqgrep)) { # fold (or unfold?) multiline output into a one-liner print join(', ', map { chomp; $_ } `$_ --version`), "\n"; }