X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/8f3bfb82de5170ef78b53f13d73af5cbdb5fabb2..9604a84387b55efdc633dd7fb20db14a65c1e343:/src/src/EDITME diff --git a/src/src/EDITME b/src/src/EDITME index 38321ecb2..75c3e7c6c 100644 --- a/src/src/EDITME +++ b/src/src/EDITME @@ -12,11 +12,12 @@ # Exim distribution directory before running the "make" command. # Things that depend on the operating system have default settings in -# OS/Makefile-Default, but these are overridden for some OS by files called -# called OS/Makefile-. You can further override these by creating files -# called Local/Makefile-, where "" stands for the name of your -# operating system - look at the names in the OS directory to see which names -# are recognized. +# OS/Makefile-Default, but these are overridden for some OS by files +# called OS/Makefile-. You can further override these settings by +# creating files Local/Makefile-, and Local/Makefile-. +# The suffix "" stands for the name of your operating system - look +# at the names in the OS directory to see which names are recognized, +# and "" is the content of the environment variable "build". # However, if you are building Exim for a single OS only, you don't need to # worry about setting up Local/Makefile-. Any build-time configuration @@ -177,6 +178,108 @@ SPOOL_DIRECTORY=/var/spool/exim +############################################################################### +# TLS # +############################################################################### +# Exim is built by default to support the SMTP STARTTLS command, which implements +# Transport Layer Security using SSL (Secure Sockets Layer). This requires you +# must install the OpenSSL library package or the GnuTLS library. Exim contains +# no cryptographic code of its own. + +# If you are running Exim as a (TLS) server, just building it with TLS support +# is all you need to do, as tls_advertise_hosts is set to '*' by +# default. But you are advised to create a suiteable certificate, and tell +# Exim about it by means of the tls_certificate and tls_privatekey run +# time options, otherwise Exim will create a self signed certificate on +# the fly. If you are running Exim only as a (TLS) client, building it with +# TLS support is all you need to do. +# +# If you are using pkg-config then you should not need to worry where +# the libraries and headers are installed, as the pkg-config .pc +# specification should include all -L/-I information necessary. +# Enabling the USE_*_PC options should be sufficient. If not using +# pkg-config, then you have to specify the libraries, and you mmight +# need to specify the locations too. + +# Uncomment the following lines if you want +# to build Exim without any TLS support (either OpenSSL or GnuTLS): +# DISABLE_TLS=yes +# Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS +# below. + +# If you are buliding with TLS, the library configuration must be done: + +# Uncomment this if you are using OpenSSL +# USE_OPENSSL=yes +# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not +# and an optional location. +# USE_OPENSSL_PC=openssl +# TLS_LIBS=-lssl -lcrypto +# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto + +# Uncomment this if you are using GnuTLS +# USE_GNUTLS=yes +# Uncomment one of these settings if you are using GnuTLS; pkg-config vs not +# and an optional location. If you disable SUPPORT_DANE below, you +# can remove the gnutls-dane references here. Earlier versions of GnuTLS +# required libtasn1 and libgrypt also; add if needed. +# USE_GNUTLS_PC=gnutls gnutls-dane +# TLS_LIBS=-lgnutls -lgnutls-dane +# TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane + +# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's +# build process will require libgcrypt-config to exist in your $PATH. A +# version that old is likely to become unsupported by Exim in 2017. + +# The security fix we provide with the gnutls_allow_auto_pkcs11 option +# (4.82 PP/09) introduces a compatibility regression. The symbol is +# not available if GnuTLS is build without p11-kit (--without-p11-kit +# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when +# building Exim. +# AVOID_GNUTLS_PKCS11=yes + +# If you are running Exim as a server, note that just building it with TLS +# support is not all you need to do. You also need to set up a suitable +# certificate, and tell Exim about it by means of the tls_certificate +# and tls_privatekey run time options. You also need to set tls_advertise_hosts +# to specify the hosts to which Exim advertises TLS support. On the other hand, +# if you are running Exim only as a client, building it with TLS support +# is all you need to do. + +# If you are using pkg-config then you should not need to worry where the +# libraries and headers are installed, as the pkg-config .pc specification +# should include all -L/-I information necessary. If not using pkg-config +# then you might need to specify the locations too. + +# Additional libraries and include files are required for both OpenSSL and +# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed +# with all your other libraries. If they are in a special directory, you may +# need something like + +# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto + +# or + +# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane +# If not using DANE under GnuTLS we can lose one library +# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt + +# TLS_LIBS is included only on the command for linking Exim itself, not on any +# auxiliary programs. If the include files are not in a standard place, you can +# set TLS_INCLUDE to specify where they are, for example: + +# TLS_INCLUDE=-I/usr/local/openssl/include/ +# or +# TLS_INCLUDE=-I/opt/gnu/include + +# You don't need to set TLS_INCLUDE if the relevant directories are already +# specified in INCLUDE. + + +# Uncomment the following line to remove support for TLS Resumption +# DISABLE_TLS_RESUME=yes + + ############################################################################### # THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY # ############################################################################### @@ -192,6 +295,11 @@ SPOOL_DIRECTORY=/var/spool/exim # least one type of lookup. You should consider whether you want to build # the Exim monitor or not. +# If you need to override how pkg-config finds configuration files for +# installed software, then you can set that here; wildcards will be expanded. + +# PKG_CONFIG_PATH=/usr/local/opt/openssl/lib/pkgconfig : /opt/*/lib/pkgconfig + #------------------------------------------------------------------------------ # These settings determine which individual router drivers are included in the @@ -253,7 +361,7 @@ TRANSPORT_SMTP=yes # you perform upgrades and revert them. You should consider the benefit of # embedding the Exim version number into LOOKUP_MODULE_DIR, so that you can # maintain two concurrent sets of modules. -# +# # *BEWARE*: ability to modify the files in LOOKUP_MODULE_DIR is equivalent to # the ability to modify the Exim binary, which is often setuid root! The Exim # developers only intend this functionality be used by OS software packagers @@ -304,8 +412,12 @@ LOOKUP_DNSDB=yes # LOOKUP_CDB=yes # LOOKUP_DSEARCH=yes # LOOKUP_IBASE=yes +# LOOKUP_JSON=yes # LOOKUP_LDAP=yes +# LOOKUP_LMDB=yes + # LOOKUP_MYSQL=yes +# LOOKUP_MYSQL_PC=mariadb # LOOKUP_NIS=yes # LOOKUP_NISPLUS=yes # LOOKUP_ORACLE=yes @@ -324,6 +436,9 @@ LOOKUP_DNSDB=yes # LOOKUP_NWILDLSEARCH=yes +# Some platforms may need this for LOOKUP_NIS: +# LIBS += -lnsl + #------------------------------------------------------------------------------ # If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate # which LDAP library you have. Unfortunately, though most of their functions @@ -357,6 +472,14 @@ PCRE_CONFIG=yes # PCRE_LIBS=-lpcre +#------------------------------------------------------------------------------ +# Comment out the following line to remove DANE support +# Note: Enabling this unconditionally overrides DISABLE_DNSSEC +# forces you to have SUPPORT_TLS enabled (the default). For DANE under +# GnuTLS we need an additional library. See TLS_LIBS or USE_GNUTLS_PC +# below. +SUPPORT_DANE=yes + #------------------------------------------------------------------------------ # Additional libraries and include directories may be required for some # lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on @@ -364,23 +487,24 @@ PCRE_CONFIG=yes # don't need to set LOOKUP_INCLUDE if the relevant directories are already # specified in INCLUDE. The settings below are just examples; -lpq is for # PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite, -lhiredis -# is for Redis. +# is for Redis, -ljansson for JSON. # # You do not need to use this for any lookup information added via pkg-config. # LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include -# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 +# LOOKUP_INCLUDE +=-I /usr/local/include +# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 -llmdb #------------------------------------------------------------------------------ # Compiling the Exim monitor: If you want to compile the Exim monitor, a # program that requires an X11 display, then EXIM_MONITOR should be set to the -# value "eximon.bin". Comment out this setting to disable compilation of the +# value "eximon.bin". De-comment this setting to enable compilation of the # monitor. The locations of various X11 directories for libraries and include # files are defaulted in the OS/Makefile-Default file, but can be overridden in # local OS-specific make files. -EXIM_MONITOR=eximon.bin +# EXIM_MONITOR=eximon.bin #------------------------------------------------------------------------------ @@ -392,22 +516,24 @@ EXIM_MONITOR=eximon.bin # WITH_CONTENT_SCAN=yes -# If you want to use the deprecated "demime" condition in the DATA ACL, -# uncomment the line below. Doing so will also explicitly turn on the -# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of -# the "demime" condition. +# If you have content scanning you may wish to only include some of the scanner +# interfaces. Uncomment any of these lines to remove that code. -# WITH_OLD_DEMIME=yes +# DISABLE_MAL_FFROTD=yes +# DISABLE_MAL_FFROT6D=yes +# DISABLE_MAL_DRWEB=yes +# DISABLE_MAL_FSECURE=yes +# DISABLE_MAL_SOPHIE=yes +# DISABLE_MAL_CLAM=yes +# DISABLE_MAL_AVAST=yes +# DISABLE_MAL_SOCK=yes +# DISABLE_MAL_CMDLINE=yes -#------------------------------------------------------------------------------ -# If you're using ClamAV and are backporting fixes to an old version, instead -# of staying current (which is the more usual approach) then you may need to -# use an older API which uses a STREAM command, now deprecated, instead of -# zINSTREAM. If you need to set this, please let the Exim developers know, as -# if nobody reports a need for it, we'll remove this option and clean up the -# code. zINSTREAM was introduced with ClamAV 0.95. -# -# WITH_OLD_CLAMAV_STREAM=yes +# These scanners are claimed to be no longer existent. + +DISABLE_MAL_AVE=yes +DISABLE_MAL_KAV=yes +DISABLE_MAL_MKS=yes #------------------------------------------------------------------------------ @@ -435,15 +561,27 @@ EXIM_MONITOR=eximon.bin # By default, Exim has support for checking the AD bit in a DNS response, to # determine if DNSSEC validation was successful. If your system libraries # do not support that bit, then set DISABLE_DNSSEC to "yes" -# Note: Enabling EXPERIMENTAL_DANE unconditionally overrides this setting. +# Note: Enabling SUPPORT_DANE unconditionally overrides this setting. # DISABLE_DNSSEC=yes # To disable support for Events set DISABLE_EVENT to "yes" - # DISABLE_EVENT=yes +# Uncomment this line to remove support for early pipelining, per +# https://datatracker.ietf.org/doc/draft-harris-early-pipe/ +# DISABLE_PIPE_CONNECT=yes + + +# Uncomment the following to remove the fast-ramp two-phase-queue-run support +# DISABLE_QUEUE_RAMP=yes + +# Uncomment the following lines to add SRS (Sender Rewriting Scheme) support +# using only native facilities. See EXPERIMENTAL_SRS_ALT for an alternative. +# SUPPORT_SRS=yes + + #------------------------------------------------------------------------------ # Compiling Exim with experimental features. These are documented in # experimental-spec.txt. "Experimental" means that the way these features are @@ -455,23 +593,29 @@ EXIM_MONITOR=eximon.bin # EXPERIMENTAL_DCC=yes -# Uncomment the following lines to add SPF support. You need to have libspf2 -# installed on your system (www.libspf2.org). Depending on where it is installed -# you may have to edit the CFLAGS and LDFLAGS lines. - -# EXPERIMENTAL_SPF=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lspf2 - -# Uncomment the following lines to add SRS (Sender rewriting scheme) support. +# Uncomment the following lines to add SRS (Sender rewriting scheme) support +# using the implementation in linbsrs_alt. # You need to have libsrs_alt installed on your system (srs.mirtol.com). # Depending on where it is installed you may have to edit the CFLAGS and # LDFLAGS lines. -# EXPERIMENTAL_SRS=yes +# EXPERIMENTAL_SRS_ALT=yes # CFLAGS += -I/usr/local/include # LDFLAGS += -lsrs_alt +# Uncomment the following line to add DMARC checking capability, implemented +# using libopendmarc libraries. You must have SPF and DKIM support enabled also. +# SUPPORT_DMARC=yes +# CFLAGS += -I/usr/local/include +# LDFLAGS += -lopendmarc +# Uncomment the following if you need to change the default. You can +# override it at runtime (main config option dmarc_tld_file) +# DMARC_TLD_FILE=/etc/exim/opendmarc.tlds + +# Uncomment the following line to add ARC (Authenticated Received Chain) +# support. You must have SPF and DKIM support enabled also. +# EXPERIMENTAL_ARC=yes + # Uncomment the following lines to add Brightmail AntiSpam support. You need # to have the Brightmail client SDK installed. Please check the experimental # documentation for implementation details. You need to edit the CFLAGS and @@ -481,19 +625,12 @@ EXIM_MONITOR=eximon.bin # CFLAGS += -I/opt/brightmail/bsdk-6.0/include # LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib -# Uncomment the following line to add DMARC checking capability, implemented -# using libopendmarc libraries. -# EXPERIMENTAL_DMARC=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lopendmarc - -# Uncomment the following line to add DANE support -# Note: Enabling this unconditionally overrides DISABLE_DNSSEC -# EXPERIMENTAL_DANE=yes - # Uncomment the following to include extra information in fail DSN message (bounces) # EXPERIMENTAL_DSN_INFO=yes +# Uncomment the following line to add queuefile transport support +# EXPERIMENTAL_QUEUEFILE=yes + ############################################################################### # THESE ARE THINGS YOU MIGHT WANT TO SPECIFY # ############################################################################### @@ -593,7 +730,7 @@ FIXED_NEVER_USERS=root # That shim can set macros before .include'ing your main configuration file. # # As a strictly transient measure to ease migration to 4.73, the -# WHITELIST_D_MACROS value definies a colon-separated list of macro-names +# WHITELIST_D_MACROS value defines a colon-separated list of macro-names # which are permitted to be overridden from the command-line which will be # honoured by the Exim user. So these are macros that can persist to delivery # time. @@ -621,14 +758,19 @@ FIXED_NEVER_USERS=root # AUTH_CRAM_MD5=yes # AUTH_CYRUS_SASL=yes # AUTH_DOVECOT=yes +# AUTH_EXTERNAL=yes # AUTH_GSASL=yes # AUTH_GSASL_PC=libgsasl # AUTH_HEIMDAL_GSSAPI=yes # AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi +# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi heimdal-krb5 # AUTH_PLAINTEXT=yes # AUTH_SPA=yes # AUTH_TLS=yes +# Heimdal through 1.5 required pkg-config 'heimdal-gssapi'; Heimdal 7.1 +# requires multiple pkg-config files to work with Exim, so the second example +# above is needed. #------------------------------------------------------------------------------ # If you specified AUTH_CYRUS_SASL above, you should ensure that you have the @@ -641,6 +783,9 @@ FIXED_NEVER_USERS=root # AUTH_LIBS=-lgsasl # AUTH_LIBS=-lgssapi -lheimntlm -lkrb5 -lhx509 -lcom_err -lhcrypto -lasn1 -lwind -lroken -lcrypt +# If using AUTH_GSASL with SCRAM methods, you should also be defining +# SUPPORT_I18N to get standards-conformant support of utf8 normalization. + #------------------------------------------------------------------------------ # When Exim is decoding MIME "words" in header lines, most commonly for use @@ -681,6 +826,13 @@ HEADERS_CHARSET="ISO-8859-1" # # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM # as well. +# +# nb: FreeBSD as of 4.89 defines LIBICONV_PLUG to pick up the system iconv +# more reliably. If you explicitly want the libiconv Port then as well +# as adding -liconv you'll want to unset LIBICONV_PLUG. If you actually need +# this, let us know, but for now the Exim Maintainers are assuming that this +# is uncommon and so you'll need to edit OS/os.h-FreeBSD yourself to remove +# the define. #------------------------------------------------------------------------------ @@ -721,68 +873,6 @@ HEADERS_CHARSET="ISO-8859-1" # *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** -#------------------------------------------------------------------------------ -# Exim can be built to support the SMTP STARTTLS command, which implements -# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you -# must install the OpenSSL library package or the GnuTLS library. Exim contains -# no cryptographic code of its own. Uncomment the following lines if you want -# to build Exim with TLS support. If you don't know what this is all about, -# leave these settings commented out. - -# This setting is required for any TLS support (either OpenSSL or GnuTLS) -# SUPPORT_TLS=yes - -# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not -# USE_OPENSSL_PC=openssl -# TLS_LIBS=-lssl -lcrypto - -# Uncomment the first and either the second or the third of these if you -# are using GnuTLS. If you have pkg-config, then the second, else the third. -# USE_GNUTLS=yes -# USE_GNUTLS_PC=gnutls -# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt - -# The security fix we provide with the gnutls_allow_auto_pkcs11 option -# (4.82 PP/09) introduces a compatibility regression. The symbol is -# not available if GnuTLS is build without p11-kit (--without-p11-kit -# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when -# building Exim. -# AVOID_GNUTLS_PKCS11=yes - -# If you are running Exim as a server, note that just building it with TLS -# support is not all you need to do. You also need to set up a suitable -# certificate, and tell Exim about it by means of the tls_certificate -# and tls_privatekey run time options. You also need to set tls_advertise_hosts -# to specify the hosts to which Exim advertises TLS support. On the other hand, -# if you are running Exim only as a client, building it with TLS support -# is all you need to do. - -# If you are using pkg-config then you should not need to worry where the -# libraries and headers are installed, as the pkg-config .pc specification -# should include all -L/-I information necessary. If not using pkg-config -# then you might need to specify the locations too. - -# Additional libraries and include files are required for both OpenSSL and -# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed -# with all your other libraries. If they are in a special directory, you may -# need something like - -# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto -# or -# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt - -# TLS_LIBS is included only on the command for linking Exim itself, not on any -# auxiliary programs. If the include files are not in a standard place, you can -# set TLS_INCLUDE to specify where they are, for example: - -# TLS_INCLUDE=-I/usr/local/openssl/include/ -# or -# TLS_INCLUDE=-I/opt/gnu/include - -# You don't need to set TLS_INCLUDE if the relevant directories are already -# specified in INCLUDE. - - #------------------------------------------------------------------------------ # The default distribution of Exim contains only the plain text form of the # documentation. Other forms are available separately. If you want to install @@ -929,11 +1019,25 @@ ZCAT_COMMAND=/usr/bin/zcat # # Uncomment the following to include Internationalisation features. This is the # SMTPUTF8 ESMTP extension, and associated facilities for handling UTF8 domain -# and localparts, per RFCs 5890, 6530 and 6533. +# and localparts, per RFC 3490 (IDNA2003). # You need to have the IDN library installed. +# If you want IDNA2008 mappings per RFCs 5890, 6530 and 6533, you additionally +# need libidn2 and SUPPORT_I18N_2008. # SUPPORT_I18N=yes # LDFLAGS += -lidn +# SUPPORT_I18N_2008=yes +# LDFLAGS += -lidn -lidn2 + + +#------------------------------------------------------------------------------ +# Uncomment the following lines to add SPF support. You need to have libspf2 +# installed on your system (www.libspf2.org). Depending on where it is installed +# you may have to edit the CFLAGS and LDFLAGS lines. + +# SUPPORT_SPF=yes +# CFLAGS += -I/usr/local/include +# LDFLAGS += -lspf2 #------------------------------------------------------------------------------ @@ -1071,6 +1175,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases # Note that this option adds to the size of the Exim binary, because the # dynamic loading library is not otherwise included. +# If libreadline is not in the normal library paths, then because Exim is +# setuid you'll need to ensure that the correct directory is stamped into +# the binary so that dlopen will find it. +# Eg, on macOS/Darwin with a third-party install of libreadline, perhaps: + +# EXTRALIBS_EXIM+=-Wl,-rpath,/usr/local/opt/readline/lib + #------------------------------------------------------------------------------ # Uncomment this setting to include IPv6 support. @@ -1375,4 +1486,8 @@ EXIM_TMPDIR="/tmp" # ENABLE_DISABLE_FSYNC=yes +#------------------------------------------------------------------------------ +# For development, add this to include code to time various stages and report. +# CFLAGS += -DMEASURE_TIMING + # End of EDITME for Exim 4.