X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/856d1e16b3386ce51b73986b9d7aaf1fbf95aba9..01603eec64d42431f182b33008206facfc7f800e:/src/src/EDITME diff --git a/src/src/EDITME b/src/src/EDITME index 956b1e1e2..264d2eaff 100644 --- a/src/src/EDITME +++ b/src/src/EDITME @@ -12,11 +12,13 @@ # Exim distribution directory before running the "make" command. # Things that depend on the operating system have default settings in -# OS/Makefile-Default, but these are overridden for some OS by files called -# called OS/Makefile-. You can further override these by creating files -# called Local/Makefile-, where "" stands for the name of your -# operating system - look at the names in the OS directory to see which names -# are recognized. +# OS/Makefile-Default, but these are overridden for some OS by files +# called called OS/Makefile-. You can further override these by +# creating files called Local/Makefile-, and +# Local/Makefile- (where "" stands for the name of +# your operating system - look at the names in the OS directory to see +# which names are recognized, and "" is derived from the +# environment variable "build") # However, if you are building Exim for a single OS only, you don't need to # worry about setting up Local/Makefile-. Any build-time configuration @@ -177,6 +179,106 @@ SPOOL_DIRECTORY=/var/spool/exim +############################################################################### +# TLS # +############################################################################### +# Exim is built by default to support the SMTP STARTTLS command, which implements +# Transport Layer Security using SSL (Secure Sockets Layer). This requires you +# must install the OpenSSL library package or the GnuTLS library. Exim contains +# no cryptographic code of its own. + +# If you are running Exim as a (TLS) server, just building it with TLS support +# is all you need to do, as tls_advertise_hosts is set to '*' by +# default. But you are advised to create a suiteable certificate, and tell +# Exim about it by means of the tls_certificate and tls_privatekey run +# time options, otherwise Exim will create a self signed certificate on +# the fly. If you are running Exim only as a (TLS) client, building it with +# TLS support is all you need to do. +# +# If you are using pkg-config then you should not need to worry where +# the libraries and headers are installed, as the pkg-config .pc +# specification should include all -L/-I information necessary. +# Enabling the USE_*_PC options should be sufficient. If not using +# pkg-config, then you have to specify the libraries, and you mmight +# need to specify the locations too. + +# no cryptographic code of its own. Uncomment the following lines if you want +# to build Exim without any TLS support (either OpenSSL or GnuTLS): +# DISABLE_TLS=yes + +# If you are buliding with TLS, the library configuration must be done: + +# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not +# and an optional location. +# USE_OPENSSL_PC=openssl +# TLS_LIBS=-lssl -lcrypto +# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto + +# Uncomment this if you are using GnuTLS +# USE_GNUTLS=yes +# Uncomment one of these settings if you are using GnuTLS; pkg-config vs not +# and an optional location. If you disable SUPPORT_DANE below, you +# can remove the gnutls-dane references here. +# USE_GNUTLS_PC=gnutls gnutls-dane +# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt -lgnutls-dane +# TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane + +# Uncomment the first and either the second or the third of these if you +# are using GnuTLS. If you have pkg-config, then the second, else the third. +# USE_GNUTLS=yes +# USE_GNUTLS_PC=gnutls +# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt + +# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's +# build process will require libgcrypt-config to exist in your $PATH. A +# version that old is likely to become unsupported by Exim in 2017. + +# The security fix we provide with the gnutls_allow_auto_pkcs11 option +# (4.82 PP/09) introduces a compatibility regression. The symbol is +# not available if GnuTLS is build without p11-kit (--without-p11-kit +# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when +# building Exim. +# AVOID_GNUTLS_PKCS11=yes + +# If you are running Exim as a server, note that just building it with TLS +# support is not all you need to do. You also need to set up a suitable +# certificate, and tell Exim about it by means of the tls_certificate +# and tls_privatekey run time options. You also need to set tls_advertise_hosts +# to specify the hosts to which Exim advertises TLS support. On the other hand, +# if you are running Exim only as a client, building it with TLS support +# is all you need to do. + +# If you are using pkg-config then you should not need to worry where the +# libraries and headers are installed, as the pkg-config .pc specification +# should include all -L/-I information necessary. If not using pkg-config +# then you might need to specify the locations too. + +# Additional libraries and include files are required for both OpenSSL and +# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed +# with all your other libraries. If they are in a special directory, you may +# need something like + +# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto + +# or + +# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane +# If not using DANE under GnuTLS we can lose one library +# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt + +# TLS_LIBS is included only on the command for linking Exim itself, not on any +# auxiliary programs. If the include files are not in a standard place, you can +# set TLS_INCLUDE to specify where they are, for example: + +# TLS_INCLUDE=-I/usr/local/openssl/include/ +# or +# TLS_INCLUDE=-I/opt/gnu/include + +# You don't need to set TLS_INCLUDE if the relevant directories are already +# specified in INCLUDE. + + + ############################################################################### # THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY # ############################################################################### @@ -258,7 +360,7 @@ TRANSPORT_SMTP=yes # you perform upgrades and revert them. You should consider the benefit of # embedding the Exim version number into LOOKUP_MODULE_DIR, so that you can # maintain two concurrent sets of modules. -# +# # *BEWARE*: ability to modify the files in LOOKUP_MODULE_DIR is equivalent to # the ability to modify the Exim binary, which is often setuid root! The Exim # developers only intend this functionality be used by OS software packagers @@ -309,8 +411,10 @@ LOOKUP_DNSDB=yes # LOOKUP_CDB=yes # LOOKUP_DSEARCH=yes # LOOKUP_IBASE=yes +# LOOKUP_JSON=yes # LOOKUP_LDAP=yes # LOOKUP_MYSQL=yes +# LOOKUP_MYSQL_PC=mariadb # LOOKUP_NIS=yes # LOOKUP_NISPLUS=yes # LOOKUP_ORACLE=yes @@ -362,6 +466,14 @@ PCRE_CONFIG=yes # PCRE_LIBS=-lpcre +#------------------------------------------------------------------------------ +# Comment out the following line to remove DANE support +# Note: Enabling this unconditionally overrides DISABLE_DNSSEC +# forces you to have SUPPORT_TLS enabled (the default). For DANE under +# GnuTLS we need an additional library. See TLS_LIBS or USE_GNUTLS_PC +# below. +SUPPORT_DANE=yes + #------------------------------------------------------------------------------ # Additional libraries and include directories may be required for some # lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on @@ -369,7 +481,7 @@ PCRE_CONFIG=yes # don't need to set LOOKUP_INCLUDE if the relevant directories are already # specified in INCLUDE. The settings below are just examples; -lpq is for # PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite, -lhiredis -# is for Redis. +# is for Redis, -ljansson for JSON. # # You do not need to use this for any lookup information added via pkg-config. @@ -397,15 +509,24 @@ EXIM_MONITOR=eximon.bin # WITH_CONTENT_SCAN=yes -#------------------------------------------------------------------------------ -# If you're using ClamAV and are backporting fixes to an old version, instead -# of staying current (which is the more usual approach) then you may need to -# use an older API which uses a STREAM command, now deprecated, instead of -# zINSTREAM. If you need to set this, please let the Exim developers know, as -# if nobody reports a need for it, we'll remove this option and clean up the -# code. zINSTREAM was introduced with ClamAV 0.95. -# -# WITH_OLD_CLAMAV_STREAM=yes +# If you have content scanning you may wish to only include some of the scanner +# interfaces. Uncomment any of these lines to remove that code. + +# DISABLE_MAL_FFROTD=yes +# DISABLE_MAL_FFROT6D=yes +# DISABLE_MAL_DRWEB=yes +# DISABLE_MAL_FSECURE=yes +# DISABLE_MAL_SOPHIE=yes +# DISABLE_MAL_CLAM=yes +# DISABLE_MAL_AVAST=yes +# DISABLE_MAL_SOCK=yes +# DISABLE_MAL_CMDLINE=yes + +# These scanners are claimed to be no longer existent. + +DISABLE_MAL_AVE=yes +DISABLE_MAL_KAV=yes +DISABLE_MAL_MKS=yes #------------------------------------------------------------------------------ @@ -433,7 +554,7 @@ EXIM_MONITOR=eximon.bin # By default, Exim has support for checking the AD bit in a DNS response, to # determine if DNSSEC validation was successful. If your system libraries # do not support that bit, then set DISABLE_DNSSEC to "yes" -# Note: Enabling EXPERIMENTAL_DANE unconditionally overrides this setting. +# Note: Enabling SUPPORT_DANE unconditionally overrides this setting. # DISABLE_DNSSEC=yes @@ -453,14 +574,6 @@ EXIM_MONITOR=eximon.bin # EXPERIMENTAL_DCC=yes -# Uncomment the following lines to add SPF support. You need to have libspf2 -# installed on your system (www.libspf2.org). Depending on where it is installed -# you may have to edit the CFLAGS and LDFLAGS lines. - -# EXPERIMENTAL_SPF=yes -# CFLAGS += -I/usr/local/include -# LDFLAGS += -lspf2 - # Uncomment the following lines to add SRS (Sender rewriting scheme) support. # You need to have libsrs_alt installed on your system (srs.mirtol.com). # Depending on where it is installed you may have to edit the CFLAGS and @@ -471,10 +584,17 @@ EXIM_MONITOR=eximon.bin # LDFLAGS += -lsrs_alt # Uncomment the following line to add DMARC checking capability, implemented -# using libopendmarc libraries. You must have SPF support enabled also. +# using libopendmarc libraries. You must have SPF and DKIM support enabled also. # EXPERIMENTAL_DMARC=yes # CFLAGS += -I/usr/local/include # LDFLAGS += -lopendmarc +# Uncomment the following if you need to change the default. You can +# override it at runtime (main config option dmarc_tld_file) +# DMARC_TLD_FILE=/etc/exim/opendmarc.tlds + +# Uncomment the following line to add ARC (Authenticated Received Chain) +# support. You must have SPF and DKIM support enabled also. +# EXPERIMENTAL_ARC=yes # Uncomment the following lines to add Brightmail AntiSpam support. You need # to have the Brightmail client SDK installed. Please check the experimental @@ -485,11 +605,6 @@ EXIM_MONITOR=eximon.bin # CFLAGS += -I/opt/brightmail/bsdk-6.0/include # LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib -# Uncomment the following line to add DANE support -# Note: Enabling this unconditionally overrides DISABLE_DNSSEC -# Note: DANE is only supported when using OpenSSL -# EXPERIMENTAL_DANE=yes - # Uncomment the following to include extra information in fail DSN message (bounces) # EXPERIMENTAL_DSN_INFO=yes @@ -630,6 +745,7 @@ FIXED_NEVER_USERS=root # AUTH_CRAM_MD5=yes # AUTH_CYRUS_SASL=yes # AUTH_DOVECOT=yes +# AUTH_EXTERNAL=yes # AUTH_GSASL=yes # AUTH_GSASL_PC=libgsasl # AUTH_HEIMDAL_GSSAPI=yes @@ -741,72 +857,6 @@ HEADERS_CHARSET="ISO-8859-1" # *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** -#------------------------------------------------------------------------------ -# Exim can be built to support the SMTP STARTTLS command, which implements -# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you -# must install the OpenSSL library package or the GnuTLS library. Exim contains -# no cryptographic code of its own. Uncomment the following lines if you want -# to build Exim with TLS support. If you don't know what this is all about, -# leave these settings commented out. - -# This setting is required for any TLS support (either OpenSSL or GnuTLS) -# SUPPORT_TLS=yes - -# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not -# USE_OPENSSL_PC=openssl -# TLS_LIBS=-lssl -lcrypto - -# Uncomment the first and either the second or the third of these if you -# are using GnuTLS. If you have pkg-config, then the second, else the third. -# USE_GNUTLS=yes -# USE_GNUTLS_PC=gnutls -# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt - -# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's -# build process will require libgcrypt-config to exist in your $PATH. A -# version that old is likely to become unsupported by Exim in 2017. - -# The security fix we provide with the gnutls_allow_auto_pkcs11 option -# (4.82 PP/09) introduces a compatibility regression. The symbol is -# not available if GnuTLS is build without p11-kit (--without-p11-kit -# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when -# building Exim. -# AVOID_GNUTLS_PKCS11=yes - -# If you are running Exim as a server, note that just building it with TLS -# support is not all you need to do. You also need to set up a suitable -# certificate, and tell Exim about it by means of the tls_certificate -# and tls_privatekey run time options. You also need to set tls_advertise_hosts -# to specify the hosts to which Exim advertises TLS support. On the other hand, -# if you are running Exim only as a client, building it with TLS support -# is all you need to do. - -# If you are using pkg-config then you should not need to worry where the -# libraries and headers are installed, as the pkg-config .pc specification -# should include all -L/-I information necessary. If not using pkg-config -# then you might need to specify the locations too. - -# Additional libraries and include files are required for both OpenSSL and -# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed -# with all your other libraries. If they are in a special directory, you may -# need something like - -# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto -# or -# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt - -# TLS_LIBS is included only on the command for linking Exim itself, not on any -# auxiliary programs. If the include files are not in a standard place, you can -# set TLS_INCLUDE to specify where they are, for example: - -# TLS_INCLUDE=-I/usr/local/openssl/include/ -# or -# TLS_INCLUDE=-I/opt/gnu/include - -# You don't need to set TLS_INCLUDE if the relevant directories are already -# specified in INCLUDE. - - #------------------------------------------------------------------------------ # The default distribution of Exim contains only the plain text form of the # documentation. Other forms are available separately. If you want to install @@ -964,6 +1014,16 @@ ZCAT_COMMAND=/usr/bin/zcat # LDFLAGS += -lidn -lidn2 +#------------------------------------------------------------------------------ +# Uncomment the following lines to add SPF support. You need to have libspf2 +# installed on your system (www.libspf2.org). Depending on where it is installed +# you may have to edit the CFLAGS and LDFLAGS lines. + +# SUPPORT_SPF=yes +# CFLAGS += -I/usr/local/include +# LDFLAGS += -lspf2 + + #------------------------------------------------------------------------------ # Support for authentication via Radius is also available. The Exim support, # which is intended for use in conjunction with the SMTP AUTH facilities, @@ -1099,6 +1159,13 @@ SYSTEM_ALIASES_FILE=/etc/aliases # Note that this option adds to the size of the Exim binary, because the # dynamic loading library is not otherwise included. +# If libreadline is not in the normal library paths, then because Exim is +# setuid you'll need to ensure that the correct directory is stamped into +# the binary so that dlopen will find it. +# Eg, on macOS/Darwin with a third-party install of libreadline, perhaps: + +# EXTRALIBS_EXIM+=-Wl,-rpath,/usr/local/opt/readline/lib + #------------------------------------------------------------------------------ # Uncomment this setting to include IPv6 support.