X-Git-Url: https://git.exim.org/exim.git/blobdiff_plain/8523533c08c018ac4b750b0e0fab6cfe611e8a49..062b77ca80a10aba99d2cf09d4a8600ca3385e24:/src/OS/Makefile-Base diff --git a/src/OS/Makefile-Base b/src/OS/Makefile-Base index 4e928322f..9eed7b0b9 100644 --- a/src/OS/Makefile-Base +++ b/src/OS/Makefile-Base @@ -1,14 +1,16 @@ -# $Cambridge: exim/src/OS/Makefile-Base,v 1.2 2004/12/16 15:11:47 tom Exp $ - # This file is the basis of the main makefile for Exim and friends. The # makefile at the top level arranges to build the main makefile by calling # scripts/Configure-Makefile from within the build directory. This -# concatentates the configuration settings from Local/Makefile and other, +# concatenates the configuration settings from Local/Makefile and other, # optional, Local/* files at the front of this file, to create Makefile in the # build directory. +# +# Copyright (c) The Exim Maintainers 1995 - 2018 +# Copyright (c) The Exim Maintainers 2020 SHELL = $(MAKE_SHELL) SCRIPTS = ../scripts +O = ../OS EDITME = ../Local/Makefile EXIMON_EDITME = ../Local/eximon.conf @@ -18,6 +20,13 @@ EXIMON_EDITME = ../Local/eximon.conf LNCC = $(CC) +# The compile commands can be very long. To make the output look better, +# they are not normally echoed in full. To get full echoing, the caller +# must set FULLECHO='' on the command line and call make with -e. We default +# FULLECHO to '@' to suppress the full echo. Then define an abbreviation. + +FULLECHO = @ +FE = $(FULLECHO) # The default target double-checks the existence of $(EDITME) and then arranges # to touch it if it exists and any of the optional configuration files, which @@ -27,7 +36,8 @@ LNCC = $(CC) # up-to-date. Then the os-specific source files and the C configuration file # are set up, and finally it goes to the main Exim target. -all: $(EDITME) checklocalmake Makefile os.h os.c config.h allexim +all: utils exim +config: $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c checklocalmake: @if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \ @@ -70,50 +80,183 @@ Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \ # Build (link) the os.h file -os.h: +os.h: $(SCRIPTS)/Configure-os.h \ + $(O)/os.h-Darwin \ + $(O)/os.h-FreeBSD \ + $(O)/os.h-GNU \ + $(O)/os.h-Linux \ + $(O)/os.h-OpenBSD \ + $(O)/os.h-SunOS5 $(SHELL) $(SCRIPTS)/Configure-os.h # Build the os.c file -os.c: ../src/os.c +os.c: ../src/os.c \ + $(SCRIPTS)/Configure-os.c \ + $(O)/os.c-FreeBSD \ + $(O)/os.c-GNU \ + $(O)/os.c-Linux \ + $(O)/os.c-SunOS5 $(SHELL) $(SCRIPTS)/Configure-os.c # Build the config.h file. config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME) - $(SHELL) $(SCRIPTS)/Configure-config.h - + $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)" + +# Build the builtin-macros data struct + +MACRO_HSRC = macro_predef.h os.h globals.h config.h macros.h \ + routers/accept.h routers/dnslookup.h routers/ipliteral.h \ + routers/iplookup.h routers/manualroute.h routers/queryprogram.h \ + routers/redirect.h + +OBJ_MACRO = macro_predef.o \ + macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \ + macro-tls.o \ + macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \ + macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \ + macro-manualroute.o macro-queryprogram.o macro-redirect.o \ + macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \ + macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \ + macro-dkim.o macro-malware.o macro-signing.o + +$(OBJ_MACRO): $(MACRO_HSRC) + +macro_predef.o : macro_predef.c + @echo "$(CC) -DMACRO_PREDEF macro_predef.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c +macro-globals.o : globals.c + @echo "$(CC) -DMACRO_PREDEF globals.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c +macro-readconf.o : readconf.c + @echo "$(CC) -DMACRO_PREDEF readconf.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c +macro-route.o : route.c + @echo "$(CC) -DMACRO_PREDEF route.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c +macro-transport.o: transport.c + @echo "$(CC) -DMACRO_PREDEF transport.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c +macro-drtables.o : drtables.c + @echo "$(CC) -DMACRO_PREDEF drtables.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c +macro-tls.o: tls.c tls-gnu.c tls-openssl.c + @echo "$(CC) -DMACRO_PREDEF tls.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c +macro-appendfile.o : transports/appendfile.c + @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c +macro-autoreply.o : transports/autoreply.c + @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c +macro-lmtp.o: transports/lmtp.c + @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c +macro-pipe.o : transports/pipe.c + @echo "$(CC) -DMACRO_PREDEF transports/pipe.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c +macro-queuefile.o : transports/queuefile.c + @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c +macro-smtp.o : transports/smtp.c + @echo "$(CC) -DMACRO_PREDEF transports/smtp.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c +macro-accept.o : routers/accept.c + @echo "$(CC) -DMACRO_PREDEF routers/accept.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c +macro-dnslookup.o : routers/dnslookup.c + @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c +macro-ipliteral.o : routers/ipliteral.c + @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c +macro-iplookup.o : routers/iplookup.c + @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c +macro-manualroute.o : routers/manualroute.c + @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c +macro-queryprogram.o : routers/queryprogram.c + @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c +macro-redirect.o : routers/redirect.c + @echo "$(CC) -DMACRO_PREDEF routers/redirect.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c +macro-auth-spa.o : auths/auth-spa.c + @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c +macro-cram_md5.o : auths/cram_md5.c + @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c +macro-cyrus_sasl.o : auths/cyrus_sasl.c + @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c +macro-dovecot.o: auths/dovecot.c + @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c +macro-external.o: auths/external.c + @echo "$(CC) -DMACRO_PREDEF auths/external.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c +macro-gsasl_exim.o : auths/gsasl_exim.c + @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c +macro-heimdal_gssapi.o: auths/heimdal_gssapi.c + @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c +macro-plaintext.o : auths/plaintext.c + @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c +macro-spa.o : auths/spa.c + @echo "$(CC) -DMACRO_PREDEF auths/spa.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c +macro-authtls.o: auths/tls.c + @echo "$(CC) -DMACRO_PREDEF auths/tls.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c +macro-dkim.o: dkim.c + @echo "$(CC) -DMACRO_PREDEF dkim.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c +macro-malware.o: malware.c + @echo "$(CC) -DMACRO_PREDEF malware.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c +macro-signing.o: pdkim/signing.c + @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c" + $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c + +macro_predef: $(OBJ_MACRO) + @echo "$(LNCC) -o $@" + $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO) + +macro.c: macro_predef + ./macro_predef > macro.c # This target is recognized specially by GNU make. It records those targets # that do not correspond to files that are being built and which should # therefore always be run, even if the files exist. This shouldn't in fact be a # problem, but it does no harm. Other make programs will just ignore this. -.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \ +.PHONY: all config utils \ + buildauths buildlookups buildpdkim buildrouters \ buildtransports checklocalmake clean -# This is the real default target for all the various exim binaries and -# scripts, once the configuring stuff is done. - -allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \ +utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \ exigrep eximstats exipick exiqgrep exiqsumm \ transport-filter.pl convert4r3 convert4r4 \ exim_checkaccess \ - exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \ - buildlookups buildrouters buildtransports \ - buildauths exim + exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock # Targets for special-purpose configuration header builders buildconfig: buildconfig.c - $(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS) + @echo "$(CC) buildconfig.c" + $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS) # Target for the exicyclog utility script -exicyclog: Makefile config.h ../src/exicyclog.src +exicyclog: config ../src/exicyclog.src @rm -f exicyclog - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -124,34 +267,40 @@ exicyclog: Makefile config.h ../src/exicyclog.src -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \ -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \ -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \ - -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \ -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \ + -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \ + -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \ -e "s?MV_COMMAND?$(MV_COMMAND)?" \ -e "s?RM_COMMAND?$(RM_COMMAND)?" \ + -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exicyclog.src > exicyclog-t @mv exicyclog-t exicyclog @chmod a+x exicyclog - @echo ">>> exicyclog script built"; echo "" + @echo ">>> exicyclog script built" # Target for the exinext utility script -exinext: Makefile config.h ../src/exinext.src +exinext: config ../src/exinext.src @rm -f exinext - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ -e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \ -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \ -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exinext.src > exinext-t @mv exinext-t exinext @chmod a+x exinext - @echo ">>> exinext script built"; echo "" + @echo ">>> exinext script built" # Target for the exiwhat utility script -exiwhat: Makefile config.h ../src/exiwhat.src +exiwhat: config ../src/exiwhat.src @rm -f exiwhat - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -164,15 +313,18 @@ exiwhat: Makefile config.h ../src/exiwhat.src -e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \ -e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \ -e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ + -e "s?RM_COMMAND?$(RM_COMMAND)?" \ ../src/exiwhat.src > exiwhat-t @mv exiwhat-t exiwhat @chmod a+x exiwhat - @echo ">>> exiwhat script built"; echo "" + @echo ">>> exiwhat script built" # Target for the exim_checkaccess utility script -exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src +exim_checkaccess: config ../src/exim_checkaccess.src @rm -f exim_checkaccess - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -180,17 +332,19 @@ exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src -e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \ -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exim_checkaccess.src > exim_checkaccess-t @mv exim_checkaccess-t exim_checkaccess @chmod a+x exim_checkaccess @echo ">>> exim_checkaccess script built"; echo "" # Target for the Exim monitor start-up script -eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \ +eximon: config ../src/eximon.src ../OS/eximon.conf-Default \ ../Local/eximon.conf @rm -f eximon $(SHELL) $(SCRIPTS)/Configure-eximon - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ @@ -200,88 +354,112 @@ eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \ -e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \ -e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \ -e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/eximon.src >> eximon @echo ">>> eximon script built"; echo "" # Targets for utilities; these are all Perl scripts that have to get the # location of Perl put in them. A few need other things as well. -exigrep: Makefile ../src/exigrep.src +exigrep: config ../src/exigrep.src @rm -f exigrep - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ -e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \ -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exigrep.src > exigrep-t @mv exigrep-t exigrep @chmod a+x exigrep - @echo ">>> exigrep script built"; echo "" + @echo ">>> exigrep script built" -eximstats: Makefile ../src/eximstats.src +eximstats: config ../src/eximstats.src @rm -f eximstats - sed \ + @. ./version.sh && sed \ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/eximstats.src > eximstats-t @mv eximstats-t eximstats @chmod a+x eximstats - @echo ">>> eximstats script built"; echo "" + @echo ">>> eximstats script built" -exiqgrep: Makefile ../src/exiqgrep.src +exiqgrep: config ../src/exiqgrep.src @rm -f exiqgrep - sed \ + @. ./version.sh && sed \ -e "s?PROCESSED_FLAG?This file has been so processed.?"\ -e "/^# /p" \ -e "/^# /d" \ -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exiqgrep.src > exiqgrep-t @mv exiqgrep-t exiqgrep @chmod a+x exiqgrep - @echo ">>> exiqgrep script built"; echo "" + @echo ">>> exiqgrep script built" -exiqsumm: Makefile ../src/exiqsumm.src +exiqsumm: config ../src/exiqsumm.src @rm -f exiqsumm - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @. ./version.sh && sed \ + -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exiqsumm.src > exiqsumm-t @mv exiqsumm-t exiqsumm @chmod a+x exiqsumm - @echo ">>> exiqsumm script built"; echo "" + @echo ">>> exiqsumm script built" -exipick: Makefile ../src/exipick.src +exipick: config ../src/exipick.src @rm -f exipick - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @. ./version.sh && sed \ + -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ -e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \ + -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/exipick.src > exipick-t @mv exipick-t exipick @chmod a+x exipick - @echo ">>> exipick script built"; echo "" + @echo ">>> exipick script built" -transport-filter.pl: Makefile ../src/transport-filter.src +transport-filter.pl: config ../src/transport-filter.src @rm -f transport-filter.pl - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @. ./version.sh && sed \ + -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/transport-filter.src > transport-filter.pl-t @mv transport-filter.pl-t transport-filter.pl @chmod a+x transport-filter.pl - @echo ">>> transport-filter.pl script built"; echo "" + @echo ">>> transport-filter.pl script built" -convert4r3: Makefile ../src/convert4r3.src +convert4r3: config ../src/convert4r3.src @rm -f convert4r3 - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @. ./version.sh && sed \ + -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/convert4r3.src > convert4r3-t @mv convert4r3-t convert4r3 @chmod a+x convert4r3 - @echo ">>> convert4r3 script built"; echo "" + @echo ">>> convert4r3 script built" -convert4r4: Makefile ../src/convert4r4.src +convert4r4: config ../src/convert4r4.src @rm -f convert4r4 - sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + @. ./version.sh && sed \ + -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \ + -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \ + -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \ ../src/convert4r4.src > convert4r4-t @mv convert4r4-t convert4r4 @chmod a+x convert4r4 - @echo ">>> convert4r4 script built"; echo "" + @echo ">>> convert4r4 script built" # These are objects of optional features. They are always compiled, but @@ -289,38 +467,44 @@ convert4r4: Makefile ../src/convert4r4.src # are thrown away by the linker. OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o -OBJ_WITH_OLD_DEMIME = demime.o -OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o +OBJ_EXPERIMENTAL = arc.o \ + bmi_spam.o \ + dane.o \ + dcc.o \ + dmarc.o \ + imap_utf7.o \ + spf.o \ + srs.o \ + utf8.o # Targets for final binaries; the main one has a build number which is # updated each time. We don't bother with that for the auxiliaries. -OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ +OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o + +OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \ directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \ - filtertest.o globals.o \ - header.o host.o ip.o log.o lss.o match.o moan.o \ + filtertest.o globals.o dkim.o dkim_transport.o hash.o \ + header.o host.o ip.o log.o lss.o match.o md5.o moan.o \ os.o parse.o queue.o \ rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \ route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \ - store.o string.o tls.o tod.o transport.o tree.o verify.o \ + std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \ + environment.o macro.o \ + $(OBJ_LOOKUPS) \ local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \ - $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL) + $(OBJ_EXPERIMENTAL) -exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \ - routers/routers.a transports/transports.a \ - $(OBJ_EXIM) version.c - @echo " " - awk '{ print ($$1+1) }' cnumber.h > cnumber.temp - rm -f cnumber.h; mv cnumber.temp cnumber.h - $(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c - rm -f exim - $(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \ - pcre/libpcre.a \ +exim: buildlookups buildauths pdkim/pdkim.a \ + buildrouters buildtransports \ + $(OBJ_EXIM) version.o + @echo "$(LNCC) -o exim" + $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \ routers/routers.a transports/transports.a lookups/lookups.a \ - auths/auths.a \ + auths/auths.a pdkim/pdkim.a \ $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \ $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \ - $(PERL_LIBS) $(TLS_LIBS) $(LDFLAGS) + $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim; \ $(STRIP_COMMAND) exim; \ @@ -335,28 +519,28 @@ exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \ OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o exim_dumpdb: $(OBJ_DUMPDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \ + @echo "$(LNCC) -o exim_dumpdb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_dumpdb; \ $(STRIP_COMMAND) exim_dumpdb; \ fi - @echo " " @echo ">>> exim_dumpdb utility built" @echo " " # The utility for interrogating/fixing the contents of an exim database -OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o +OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o util-md5.o exim_fixdb: $(OBJ_FIXDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \ + @echo "$(LNCC) -o exim_fixdb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_fixdb; \ $(STRIP_COMMAND) exim_fixdb; \ fi - @echo " " @echo ">>> exim_fixdb utility built" @echo " " @@ -365,40 +549,41 @@ exim_fixdb: $(OBJ_FIXDB) OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o exim_tidydb: $(OBJ_TIDYDB) - $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \ + @echo "$(LNCC) -o exim_tidydb" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_tidydb; \ $(STRIP_COMMAND) exim_tidydb; \ fi - @echo " " @echo ">>> exim_tidydb utility built" @echo " " # The utility for building dbm files exim_dbmbuild: exim_dbmbuild.o - $(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \ + @echo "$(LNCC) -o exim_dbmbuild" + $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \ $(LIBS) $(EXTRALIBS) $(DBMLIB) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_dbmbuild; \ $(STRIP_COMMAND) exim_dbmbuild; \ fi - @echo " " @echo ">>> exim_dbmbuild utility built" @echo " " # The utility for locking a mailbox while messing around with it -exim_lock: exim_lock.c - $(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c - $(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \ +exim_lock: exim_lock.c os.h + @echo "$(CC) exim_lock.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c + @echo "$(LNCC) -o exim_lock" + $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \ $(LIBS) $(EXTRALIBS) @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) exim_lock; \ $(STRIP_COMMAND) exim_lock; \ fi - @echo " " @echo ">>> exim_lock utility built" @echo " " @@ -416,35 +601,78 @@ MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \ # The complete modules list also includes some specially compiled versions of # code from the main Exim source tree. -OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN) - -eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \ - ../exim_monitor/em_version.c - $(CC) -o em_version.o -c \ +OBJ_MONBIN = util-spool_in.o \ + util-store.o \ + util-string.o \ + util-queue.o \ + util-tod.o \ + util-tree.o \ + $(MONBIN) + +eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) ../exim_monitor/em_version.c \ + mytypes.h store.h macros.h + @echo "$(CC) exim_monitor/em_version.c" + $(FE)$(CC) -o em_version.o -c \ $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c - $(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \ - $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \ + @echo "$(LNCC) -o eximon.bin" + $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \ + $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \ $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc @if [ x"$(STRIP_COMMAND)" != x"" ]; then \ echo $(STRIP_COMMAND) eximon.bin; \ $(STRIP_COMMAND) eximon.bin; \ fi - @echo " " @echo ">>> exim monitor binary built" @echo " " # Compile step for most of the exim modules. HDRS is a list of headers -# which cause everthing to be rebuilt. PHDRS is the same, for the use +# which cause everything to be rebuilt. PHDRS is the same, for the use # of routers, transports, and authenticators. I can't find a way of doing this # in one. This list is overkill, but it doesn't really take much time to # rebuild Exim on a modern computer. -HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h globals.h local_scan.h macros.h mytypes.h structs.h -PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h +HDRS = blob.h \ + config.h \ + dbfunctions.h \ + dbstuff.h \ + exim.h \ + functions.h \ + globals.h \ + hash.h \ + local_scan.h \ + macros.h \ + mytypes.h \ + sha_ver.h \ + structs.h \ + os.h +PHDRS = ../config.h \ + ../dbfunctions.h \ + ../dbstuff.h \ + ../exim.h \ + ../functions.h \ + ../globals.h \ + ../local_scan.h \ + ../macros.h \ + ../mytypes.h \ + ../structs.h \ + ../os.h .SUFFIXES: .o .c -.c.o:; $(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c +.c.o:; @echo "$(CC) $*.c" + $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c + +# Update Exim's version information and build the version object. The dependency +# chain here avoids problems under parallel-make. + +version.sh: + @../scripts/reversion + +version.h: version.sh + +cnumber.h: version.h + +version.o: $(HDRS) cnumber.h version.h version.c # This is the dummy module for use by test compiles of individual modules. It # contains functions such as log_write() that may be called from bits of Exim @@ -455,24 +683,28 @@ dummies.o: dummies.c # Compile instructions for perl.o for when EXIM_PERL is set perl.o: $(HDRS) perl.c - $(PERL_CC) $(PERL_CCOPTS) $(INCLUDE) -c perl.c + @echo "$(PERL_CC) perl.c" + $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c # Compile instructions for the database utility modules exim_dumpdb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_DUMPDB \ -o exim_dumpdb.o exim_dbutil.c exim_fixdb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_FIXDB \ -o exim_fixdb.o exim_dbutil.c exim_tidydb.o: $(HDRS) exim_dbutil.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DEXIM_TIDYDB \ -o exim_tidydb.o exim_dbutil.c @@ -480,22 +712,44 @@ exim_tidydb.o: $(HDRS) exim_dbutil.c # Compile instructions for exim_dbmbuild exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c - $(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c + @echo "$(CC) exim_dbmbuild.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \ + -o exim_dbmbuild.o exim_dbmbuild.c # Utilities use special versions of some modules - typically with debugging # calls cut out. util-spool_in.o: $(HDRS) spool_in.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c + @echo "$(CC) -DCOMPILE_UTILITY spool_in.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c util-store.o: $(HDRS) store.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c + @echo "$(CC) -DCOMPILE_UTILITY store.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c util-string.o: $(HDRS) string.c - $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c + @echo "$(CC) -DCOMPILE_UTILITY string.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c + +util-md5.o: $(HDRS) md5.c + @echo "$(CC) -DCOMPILE_UTILITY queue.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-md5.o md5.c + +util-queue.o: $(HDRS) queue.c + @echo "$(CC) -DCOMPILE_UTILITY queue.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c + +util-tod.o: $(HDRS) tod.c + @echo "$(CC) -DCOMPILE_UTILITY tod.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c + +util-tree.o: $(HDRS) tree.c + @echo "$(CC) -DCOMPILE_UTILITY tree.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tree.o tree.c util-os.o: $(HDRS) os.c - $(CC) -c $(CFLAGS) $(INCLUDE) \ + @echo "$(CC) -DCOMPILE_UTILITY os.c" + $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \ -DCOMPILE_UTILITY \ -DOS_LOAD_AVERAGE \ -DFIND_RUNNING_INTERFACES \ @@ -504,34 +758,39 @@ util-os.o: $(HDRS) os.c # The local scan module depends only on its own special header, and is compiled # from a source whose location is set by configuration. -local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE) - $(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE) +local_scan.o: config local_scan.h ../$(LOCAL_SCAN_SOURCE) + @echo "$(CC) local_scan.c" + $(FE)$(CC) -DLOCAL_SCAN -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE) # Dependencies for the "ordinary" exim modules acl.o: $(HDRS) acl.c +base64.o: $(HDRS) mime.h base64.c child.o: $(HDRS) child.c crypt16.o: $(HDRS) crypt16.c daemon.o: $(HDRS) daemon.c dbfn.o: $(HDRS) dbfn.c debug.o: $(HDRS) debug.c -deliver.o: $(HDRS) deliver.c +deliver.o: $(HDRS) transports/smtp.h deliver.c directory.o: $(HDRS) directory.c dns.o: $(HDRS) dns.c enq.o: $(HDRS) enq.c exim.o: $(HDRS) exim.c expand.o: $(HDRS) expand.c +environment.o: $(HDRS) environment.c filter.o: $(HDRS) filter.c filtertest.o: $(HDRS) filtertest.c globals.o: $(HDRS) globals.c +hash.o: $(HDRS) hash.c header.o: $(HDRS) header.c host.o: $(HDRS) host.c ip.o: $(HDRS) ip.c log.o: $(HDRS) log.c lss.o: $(HDRS) lss.c match.o: $(HDRS) match.c +md5.o: $(HDRS) md5.c moan.o: $(HDRS) moan.c -os.o: $(HDRS) os.c +os.o: $(HDRS) $(OS_C_INCLUDES) os.c parse.o: $(HDRS) parse.c queue.o: $(HDRS) queue.c rda.o: $(HDRS) rda.c @@ -547,35 +806,40 @@ smtp_in.o: $(HDRS) smtp_in.c smtp_out.o: $(HDRS) smtp_out.c spool_in.o: $(HDRS) spool_in.c spool_out.o: $(HDRS) spool_out.c +std-crypto.o: $(HDRS) std-crypto.c store.o: $(HDRS) store.c string.o: $(HDRS) string.c -tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c +tls.o: $(HDRS) tls.c \ + tls-gnu.c tlscert-gnu.c \ + tls-openssl.c tlscert-openssl.c \ + tls-cipher-stdname.c tod.o: $(HDRS) tod.c transport.o: $(HDRS) transport.c tree.o: $(HDRS) tree.c -verify.o: $(HDRS) verify.c - +verify.o: $(HDRS) transports/smtp.h verify.c +dkim.o: $(HDRS) pdkim/pdkim.h dkim.c +dkim_transport.o: $(HDRS) dkim_transport.c # Dependencies for WITH_CONTENT_SCAN modules malware.o: $(HDRS) malware.c -mime.o: $(HDRS) mime.c +mime.o: $(HDRS) mime.h mime.c regex.o: $(HDRS) regex.c spam.o: $(HDRS) spam.c spool_mbox.o: $(HDRS) spool_mbox.c -# Dependencies for WITH_OLD_DEMIME modules - -demime.o: $(HDRS) demime.c - - # Dependencies for EXPERIMENTAL_* modules -bmi_spam.o: $(HDRS) bmi_spam.c -spf.o: $(HDRS) spf.c -srs.o: $(HDRS) srs.c - +arc.o: $(HDRS) pdkim/pdkim.h arc.c +bmi_spam.o: $(HDRS) bmi_spam.c +dane.o: $(HDRS) dane.c dane-openssl.c +dcc.o: $(HDRS) dcc.h dcc.c +dmarc.o: $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c +imap_utf7.o: $(HDRS) imap_utf7.c +spf.o: $(HDRS) spf.h spf.c +srs.o: $(HDRS) srs.h srs.c +utf8.o: $(HDRS) utf8.c # The module containing tables of available lookups, routers, auths, and # transports must be rebuilt if any of them are. However, because the makefiles @@ -587,6 +851,11 @@ srs.o: $(HDRS) srs.c drtables.o: $(HDRS) drtables.c +# We depend upon object files built as part of building the lookups library +# When using parallel make, we don't have the dependency to force building +# in the sub-directory unless we force that dependency: + +$(OBJ_LOOKUPS): buildlookups # The exim monitor's private modules - the sources live in a private # subdirectory. The final binary combines the private modules with some @@ -605,68 +874,54 @@ em_text.o: ../exim_monitor/em_text.c ../exim_monitor/em_hdr.h em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h $(MONBIN): $(HDRS) - $(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \ - ../exim_monitor/`echo $@ | sed 's/o$$/c/'` - - -# Targets for the various libraries that Exim uses. This coding is tedious, -# because different versions of "make" behave in different ways with regard -# to rebuilding. If these target names are of the form pcre/libpcre.a, for -# example, then a forcing mechanism is required to get them obeyed each time. -# That's fine on Solaris and other systems; the rebuilding of the exim target -# happens only if the libraries are actually rebuilt. However, on IRIX, if -# the target is forced, the exim target gets unnecessarily rebuilt even if -# the .a file is not. Contrariwise, if we use dummy names, they don't interact -# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get -# rebuilt when it should. (For the others it does, because they remove -# drtables.o when they rebuild.) To get round this, we forcibly remove the -# binary when it needs to be rebuilt. - -# The PCRE regex library. Move the pcretest program to the util directory. Some -# "clever" versions of make notice that there are two successive shell -# commands, and they run them in the same shell. This means that we have to -# take care to encapsulate change of directory in parentheses, so that it -# reverts when it should. - -buildpcre: - @(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \ - CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)") - @if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \ - rm -f exim eximon.bin; fi + @echo "$(CC) exim_monitor/$(@:.o=.c)" + $(FE)$(CC) -o $@ -c $(CFLAGS) -DCOMPILE_UTILITY -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \ + ../exim_monitor/$(@:.o=.c) + + +# Targets for the various libraries that Exim uses. # The lookups library. -buildlookups: - @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \ - echo " " +buildlookups: config + @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)" + @echo " " # The routers library. -buildrouters: - @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildrouters: config + @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The transports library. -buildtransports: - @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildtransports: config + @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The library of authorization modules -buildauths: - @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ - RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \ - INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \ - echo " " +buildauths: config + @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " + +# The PDKIM library + +buildpdkim: pdkim/pdkim.a +pdkim/pdkim.a: config + @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \ + FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \ + INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)" + @echo " " # The "clean", "install", and "makefile" targets just pass themselves back to # the main Exim makefile. These targets will be obeyed only if "make" is obeyed @@ -695,40 +950,43 @@ sa-os.o: $(HDRS) os.c # These are the test targets themselves test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \ - string.o tod.o version.o + string.o tod.o version.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c + $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c $(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \ dummies.o sa-globals.o sa-os.o store.o string.o \ - tod.o version.o $(LIBS) $(DBMLIB) - rm -f dbfn.o + tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS) + rm -f dbfn.o store.o -test_host: config.h host.c dns.c dummies.o sa-globals.o sa-os.o store.o \ - string.o tod.o tree.o +test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \ + store.o string.o tod.o tree.o + $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c $(LNCC) -o test_host $(LFLAGS) \ - host.o dns.o dummies.o sa-globals.o os.o store.o string.o tod.o tree.o \ - $(LIBS) $(LIBRESOLV) - rm -f dummies.o host.o dns.o + host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \ + tod.o tree.o $(LIBS) $(LIBRESOLV) + rm -f child.o dummies.o host.o dns.o -test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o +test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c $(LNCC) -o test_os $(LFLAGS) os.o dummies.o \ - sa-globals.o store.o string.o tod.o $(LIBS) + sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS) rm -f os.o test_parse: config.h parse.c dummies.o sa-globals.o \ - store.o string.o tod.o version.o + store.o string.o tod.o version.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c $(LNCC) -o test_parse $(LFLAGS) parse.o \ - dummies.o sa-globals.o store.o string.o tod.o version.o + dummies.o sa-globals.o store.o string.o tod.o version.o \ + utf8.o $(LDFLAGS) rm -f parse.o -test_string: config.h string.c dummies.o sa-globals.o store.o tod.o +test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c $(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \ - dummies.o sa-globals.o store.o tod.o $(LIBS) + dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS) rm -f string.o # End